Biofilms of Metallic Alloys in a Nanometer Scale

What is it about?

The main purpose of this study was to monitor the growth of the marine bio-film, of micro/macro-organisms, on the surface of different metallic alloys in seawater by electrochemical impedance spectroscopy (EIS). The alloys used in this study were; UNS 1020 carbon steel, stainless steel 304, stainless steel 316L, Sanicro 28, Cu–Ni 70–30, Hastelloy G-30, and titanium. The EIS was used to measure the A.C. Impedance (Z) and the double layer capacitance (Cdl) of the formed bio-film in seawater on a frequent basis. The total exposure time of the tests ranged between 90 days to 180 days. The visual inspection of the tested samples showed a bio-film formation on the surface of these samples. The microbiologically influenced (induced) corrosion (MIC) was observed only on the carbon steel. Monitoring the growth of the bio-film formation was accomplished by the EIS during the 90-180 days exposure of the tested samples. A gradual monitoring of the growth of the bio-film formation was achieved by mathematically correlating the obtained the A.C. Impedance (Z) and the double layer capacitance (Cdl) of the bio-film to the thickness of the bio-film formation. The advantage of EIS is a non-invasive technique with a sensing (spatial) resolution in a nanometer scale in a comparison to other techniques of monitoring the growth of bio-films on metallic alloys in aqueous solutions

Featured Image

Why is it important?

Estimation of the biofilm thickness from the obtained data of the double capacitance of the biofilm bu EIS.

Perspectives