All Stories

  1. Biopolymers and Biocomposites: Chemistry and Technology

    Article • Current Analytical Chemistry, July 2020, Bentham Science Publishers

    Professor S.M. Sapuan, Dr. R.A. Ilyas

  2. The Preparation Methods and Processing of Natural Fibre Bio-polymer Composites

    Article • Current Organic Synthesis, January 2020, Bentham Science Publishers

    Professor S.M. Sapuan, Dr. R.A. Ilyas

  3. Effect of cinnamon essential oil on morphological, flammability and thermal properties of nanocellulose fibre–reinforced starch biopolymer composites

    Article • Nanotechnology Reviews, January 2020, De Gruyter

    Professor S.M. Sapuan

  4. Material Selection of Natural Fibers for Composite Automotive Component Using Analytic Hierarchy Process/Analytic Network Process in Concurrent Engineering Approach

    Article • Key Engineering Materials, May 2019, Trans Tech Publications

    Professor S.M. Sapuan

  5. Physical, thermal, morphological, and tensile properties of cornstarch-based films as affected by different plasticizers

    Article • International Journal of Food Properties, January 2019, Taylor & Francis

    Professor S.M. Sapuan

  6. Characterisation of cassava biopolymers and the determination of their optimum processing temperatures

    Article • Plastics Rubber and Composites Macromolecular Engineering, October 2018, Taylor & Francis

    Januar Parlaungan Siregar, Professor S.M. Sapuan

  7. Nanocrystalline Cellulose as Reinforcement for Polymeric Matrix Nanocomposites and its Potential Applications: A Review

    Article • Current Analytical Chemistry, May 2018, Bentham Science Publishers

    Professor S.M. Sapuan, Dr. R.A. Ilyas

  8. On the Effects of Geometrical Shapes in Failure Modes in Natural – Conventional Fiber Reinforced Composite Tube: A Review

    Article • Current Analytical Chemistry, May 2018, Bentham Science Publishers

    Professor Abdel Magid Hamouda, Professor S.M. Sapuan, Munir Alkbir

  9. Seaweeds as Renewable Sources for Biopolymers and its Composites: A Review

    Article • Current Analytical Chemistry, May 2018, Bentham Science Publishers

    Professor S.M. Sapuan, Dr Mohammad Jawaid

  10. Review of Kenaf Reinforced Hybrid Biocomposites: Potential for Defence Applications

    Article • Current Analytical Chemistry, May 2018, Bentham Science Publishers

    Dr RIDWAN YAHAYA, Professor S.M. Sapuan, Dr Mohammad Jawaid

  11. Concurrent Conceptual Design and Materials Selection of Natural Fiber Composite Products

    Article • January 2018, Springer Science + Business Media

    Professor S.M. Sapuan

  12. Sugar Palm Starch-Based Composites for Packaging Applications

    Article • November 2017, Springer Science + Business Media

    Professor S.M. Sapuan, Dr. R.A. Ilyas

  13. A review of sugar palm (Arenga pinnata): application, fibre characterisation and composites

    Article • Multidiscipline Modeling in Materials and Structures, November 2017, Emerald

    Professor S.M. Sapuan, Dr Suhad D. Salman

  14. Mechanical and Thermal Performances of Roselle Fiber/TPU composites

    Article • Polymer-Plastics Technology and Engineering, May 2017, Taylor & Francis

    Professor S.M. Sapuan, Mohd Radzi Ali, Dr Mohammad Jawaid

  15. Editorial (Thematic Issue: Theme: Polymers And Polymer Composites)

    Article • Current Organic Synthesis, February 2017, Bentham Science Publishers

    Professor S.M. Sapuan, Dr Mohammad Jawaid

  16. Polyurethane-Based Biocomposites

    Article • January 2017, Elsevier

    Professor S.M. Sapuan, Dr Mohammad Jawaid

  17. Preface

    Article • January 2017, Elsevier

    Professor S.M. Sapuan

  18. Introduction

    Article • January 2017, Elsevier

    Professor S.M. Sapuan

  19. Composite Materials

    Article • January 2017, Elsevier

    Professor S.M. Sapuan

  20. Design for Sustainability in Composite Product Development

    Article • January 2017, Elsevier

    Professor S.M. Sapuan

  21. Conceptual Design in Concurrent Engineering for Composites

    Article • January 2017, Elsevier

    Professor S.M. Sapuan

  22. Concurrent Engineering, Product Design, and Development

    Article • January 2017, Elsevier

    Professor S.M. Sapuan

  23. Materials Selection for Composites: Concurrent Engineering Perspective

    Article • January 2017, Elsevier

    Professor S.M. Sapuan

  24. Green Biocomposites

    Article • January 2017, Springer Science + Business Media

    Professor S.M. Sapuan, Dr Mohammad Jawaid

  25. Green Biocomposites

    Article • January 2017, Springer Science + Business Media

    Professor S.M. Sapuan

  26. Concurrent Engineering in Design and Development of Composite Products

    Article • January 2017, Elsevier

    Professor S.M. Sapuan

  27. Effect of cocoa pod husk filler loading on tensile properties of cocoa pod husk/polylactic acid green biocomposite films

    Article • January 2017, American Institute of Physics

    Professor S.M. Sapuan

  28. Design characteristics, codes and standards of natural fibre composites

    Article • January 2017, Elsevier

    Professor S.M. Sapuan

  29. Biocomposites Composed of Bio-Based Epoxy Resins, Bio-Based Polyphenols and Lignocellulosic Fibers

    Article • January 2016, Taylor & Francis

    Professor S.M. Sapuan

  30. Research on Natural Fiber Polymer Composites: The Way Forward

    Article • Polymer science, January 2016, OMICS Publishing Group

    Professor S.M. Sapuan

  31. Material Characterization of Roselle Fibre ([i]Hibiscus sabdariffa [/i]L.) as Potential Reinforcement Material for Polymer Composites

    Article • Fibres and Textiles in Eastern Europe, October 2015, Index Copernicus

    Professor S.M. Sapuan, Dr Mohammad Jawaid

  32. Design of Natural Fiber-Reinforced Composite Structures

    Article • October 2015, Taylor & Francis

    Professor S.M. Sapuan

  33. Concurrent Engineering in Natural Fibre Composite Product Development

    Article • Applied Mechanics and Materials, May 2015, Trans Tech Publications

    Professor S.M. Sapuan

  34. A Model for Evaluating and Determining the Most Appropriate Polymer Matrix Type for Natural Fiber Composites

    Article • International Journal of Polymer Analysis and Characterization, February 2015, Taylor & Francis

    Professor S.M. Sapuan, Dr Faris M. AL-Oqla

  35. Effect of layering sequence and chemical treatment on the mechanical properties of woven kenaf–aramid hybrid laminated composites

    Article • Materials & Design (1980-2015), February 2015, Elsevier

    Professor S.M. Sapuan, Dr Mohammad Jawaid, Dr Suhad D. Salman

  36. A Study on Chemical Composition, Physical, Tensile, Morphological, and Thermal Properties of Roselle Fibre: Effect of Fibre Maturity

    Article • BioResources, January 2015, BioResources

    Professor S.M. Sapuan, Dr Mohammad Jawaid

  37. Torsional behaviour of filament wound kenaf yarn fibre reinforced unsaturated polyester composite hollow shafts

    Article • Materials & Design (1980-2015), January 2015, Elsevier

    Professor S.M. Sapuan, Dr Suhad D. Salman

  38. Manufacturing of Natural Fibre Reinforced Polymer Composites

    Article • January 2015, Springer Science + Business Media

    Dr Mohammad Jawaid, Professor S.M. Sapuan, Prof Dr Md Enamul Hoque

  39. Bio-nanocomposites from Natural Fibre Derivatives: Manufacturing and Properties

    Article • January 2015, Springer Science + Business Media

    Professor S.M. Sapuan

  40. Effect of fiber loading on mechanical and morphological properties of cocoa pod husk fibers reinforced thermoplastic polyurethane composites

    Article • Materials & Design (1980-2015), December 2014, Elsevier

    Professor S.M. Sapuan

  41. A Novel Evaluation Tool for Enhancing the Selection of Natural Fibers for Polymeric Composites Based on Fiber Moisture Content Criterion

    Article • BioResources, November 2014, BioResources

    Professor S.M. Sapuan, Dr Faris M. AL-Oqla

  42. Research on Cellulose‐Based Polymer Composites in Southeast Asia

    Article • November 2014, Wiley

    Professor S.M. Sapuan

  43. Mechanical performance of woven kenaf-Kevlar hybrid composites

    Article • Journal of Reinforced Plastics and Composites, November 2014, SAGE Publications

    Professor S.M. Sapuan, Dr Mohammad Jawaid, Dr Suhad D. Salman

  44. A Simplified Life Cycle Analysis of an Automotive Parking Brake Lever Using Polymer Composites

    Article • Applied Mechanics and Materials, November 2014, Trans Tech Publications

    Professor S.M. Sapuan, Dr hambali Ariff

  45. Analytical Hierarchy Process for Design Selection of Micro Hot-Marking Tool

    Article • Applied Mechanics and Materials, November 2014, Trans Tech Publications

    Professor S.M. Sapuan, Dr hambali Ariff, Sivakumard Dhar Malingam, Sivarao Subramonian

  46. Quasi-static penetration and ballistic properties of kenaf–aramid hybrid composites

    Article • Materials & Design (1980-2015), November 2014, Elsevier

    Professor S.M. Sapuan, Dr Mohammad Jawaid, Dr Suhad D. Salman

  47. Effect of Alkali Treatment on the Physical, Mechanical, and Morphological Properties of Waste Betel Nut (Areca catechu) Husk Fibre

    Article • BioResources, October 2014, BioResources

    Professor S.M. Sapuan, Dr Mohammad Jawaid, Prof Mariatti M. Mariatti Jaafar

  48. Assessment of Double Hole Contrast Detail Phantom for Image Displacement Evaluation

    Article • Applied Mechanics and Materials, October 2014, Trans Tech Publications

    Professor S.M. Sapuan

  49. POLYMER COMPOSITE MANUFACTURING USING A PULTRUSION PROCESS: A REVIEW

    Article • American Journal of Applied Sciences, October 2014, Science Publications

    Professor S.M. Sapuan

  50. BIODEGRADABILITY AND MECHANICAL BEHAVIOUR OF SUGAR PALM STARCH BASED BIOPOLYMER

    Article • American Journal of Applied Sciences, October 2014, Science Publications

    Professor S.M. Sapuan

  51. Enhancement of Physical and Mechanical Properties of Sugar Palm Fiber via Vacuum Resin Impregnation

    Article • August 2014, Wiley

    Professor S.M. Sapuan

  52. Effect of Fiber Loading on Tensile Properties of Cocoa Pod Husk Fibers Reinforced Thermoplastic Polyurethane Composites

    Article • Applied Mechanics and Materials, August 2014, Trans Tech Publications

    Professor S.M. Sapuan

  53. Effect of geometry on crashworthiness parameters of natural kenaf fibre reinforced composite hexagonal tubes

    Article • Materials & Design (1980-2015), August 2014, Elsevier

    Professor S.M. Sapuan

  54. Taguchi design optimization of machining parameters on the CNC end milling process of halloysite nanotube with aluminium reinforced epoxy matrix (HNT/Al/Ep) hybrid composite

    Article • HBRC Journal, August 2014, Taylor & Francis

    Professor S.M. Sapuan

  55. Optimization and numerical simulation analysis for molded thin‐walled parts fabricated using wood‐filled polypropylene composites via plastic injection molding

    Article • Polymer Engineering & Science, July 2014, Wiley

    Professor S.M. Sapuan, Dr Mohd Azaman Md Deros

  56. Mechanical, thermal and morphological properties of durian skin fibre reinforced PLA biocomposites

    Article • Materials & Design (1980-2015), July 2014, Elsevier

    Professor S.M. Sapuan

  57. Combined Multi-criteria Evaluation Stage Technique as an Agro Waste Evaluation Indicator for Polymeric Composites: Date Palm Fibers as a Case Study

    Article • BioResources, June 2014, BioResources

    Professor S.M. Sapuan, Dr Faris M. AL-Oqla

  58. Concurrent engineering approach in the development of composite products: A review

    Article • Materials & Design (1980-2015), June 2014, Elsevier

    Professor S.M. Sapuan

  59. Design, Analysis and Fabrication of Conceptual Innovative Hand Tool

    Article • Applied Mechanics and Materials, June 2014, Trans Tech Publications

    Professor S.M. Sapuan

  60. Mechanical properties of water hyacinth fibers – polyester composites before and after immersion in water

    Article • Materials & Design (1980-2015), June 2014, Elsevier

    Professor S.M. Sapuan

  61. Problems Evaluation for TRIZ Method Using AHP: Case Study on Car’s Dashboard Improvement Design Concepts

    Article • Applied Mechanics and Materials, June 2014, Trans Tech Publications

    Professor S.M. Sapuan

  62. Effect of Fiber Loading on Tensile Properties of Cocoa Pod Husk Fibers Reinforced Thermoplastic Polyurethane Composites

    Article • Applied Mechanics and Materials, June 2014, Trans Tech Publications

    Professor S.M. Sapuan

  63. Effect of Fiber Loading on the Mechanical Properties of Millet Husk Filled High Density Polyethylene Composites

    Article • Applied Mechanics and Materials, June 2014, Trans Tech Publications

    Professor S.M. Sapuan

  64. Experimental Quasi-Static Axial Crushing of Non-Woven Kenaf Fibre/Epoxy Hexagonal Composite Tubes

    Article • Applied Mechanics and Materials, June 2014, Trans Tech Publications

    Professor S.M. Sapuan

  65. Optimization of Processing Parameters and Fiber Content of Cocoa Pod Husk Fiber-Reinforced Thermoplastic Polyurethane Composites by Taguchi Method

    Article • Applied Mechanics and Materials, June 2014, Trans Tech Publications

    Professor S.M. Sapuan

  66. Selection of Natural Fibre for Hybrid Laminated Composites Vehicle Spall Liners Using Analytical Hierarchy Process (AHP)

    Article • Applied Mechanics and Materials, June 2014, Trans Tech Publications

    Professor S.M. Sapuan, Dr Suhad D. Salman

  67. Tensile Properties of Kenaf Yarn Fibre Reinforced Unsaturated Polyester Composites at Different Fibre Orientations

    Article • Applied Mechanics and Materials, June 2014, Trans Tech Publications

    Professor S.M. Sapuan, Dr Suhad D. Salman

  68. Thermoplastic Matrix Material Selection Using Multi Criteria Decision Making Method for Hybrid Polymer Composites

    Article • Applied Mechanics and Materials, June 2014, Trans Tech Publications

    Professor S.M. Sapuan

  69. Effect of Fiber Treatment on Stress-Strain Behavior of Kenaf Fibers Reinforced Thermoplastic Polyurethane Composites

    Article • Applied Mechanics and Materials, June 2014, Trans Tech Publications

    Professor S.M. Sapuan

  70. Numerical Simulation on Moulded Thin-Walled Parts via Injection Moulding Process

    Article • Applied Mechanics and Materials, June 2014, Trans Tech Publications

    Professor S.M. Sapuan, Dr Mohd Azaman Md Deros

  71. Influence of fiber content on mechanical, morphological and thermal properties of kenaf fibers reinforced poly(vinyl chloride)/thermoplastic polyurethane poly-blend composites

    Article • Materials & Design (1980-2015), June 2014, Elsevier

    Professor S.M. Sapuan, Dr Mohammad Jawaid

  72. Characterization of physical, mechanical, thermal and morphological properties of agro-waste betel nut (Areca catechu) husk fibre

    Article • Journal of Cleaner Production, June 2014, Elsevier

    Professor S.M. Sapuan, Prof Mariatti M. Mariatti Jaafar

  73. Mechanical and thermal properties of josapine pineapple leaf fiber (PALF) and PALF-reinforced vinyl ester composites

    Article • Fibers and Polymers, May 2014, Springer Science + Business Media

    Professor S.M. Sapuan

  74. Effects of kenaf contents and fiber orientation on physical, mechanical, and morphological properties of hybrid laminated composites for vehicle spall liners

    Article • Polymer Composites, April 2014, Wiley

    Professor S.M. Sapuan, Dr RIDWAN YAHAYA, Dr Mohammad Jawaid, Dr Suhad D. Salman

  75. Integrated TRIZ-AHP Support System for Conceptual Design

    Article • Applied Mechanics and Materials, April 2014, Trans Tech Publications

    Professor S.M. Sapuan

  76. Effect of Post Curing, Fibre Content and Resin-Hardener Mixing Ratio on the Properties of Kenaf-Aramid Hybrid Composites

    Article • Applied Mechanics and Materials, April 2014, Trans Tech Publications

    Professor S.M. Sapuan, Dr Mohammad Jawaid, Dr Suhad D. Salman

  77. Rigidity Analysis of Kenaf Thermoplastic Composites Using Halpin-Tsai Equation

    Article • Applied Mechanics and Materials, April 2014, Trans Tech Publications

    Professor S.M. Sapuan

  78. Fatigue Life Prediction of Austenitic Type 316L Stainless Steel Using ABAQUS

    Article • Advanced Materials Research, March 2014, Trans Tech Publications

    Professor S.M. Sapuan

  79. Optimizing the parameters in durian skin fiber reinforced polypropylene composites by response surface methodology

    Article • Industrial Crops and Products, March 2014, Elsevier

    Professor S.M. Sapuan

  80. Natural fiber reinforced polymer composites in industrial applications: feasibility of date palm fibers for sustainable automotive industry

    Article • Journal of Cleaner Production, March 2014, Elsevier

    Professor S.M. Sapuan, Dr Faris M. AL-Oqla

  81. Numerical simulation analysis of the in-cavity residual stress distribution of lignocellulosic (wood) polymer composites used in shallow thin-walled parts formed by the injection moulding process

    Article • Materials & Design (1980-2015), March 2014, Elsevier

    Professor S.M. Sapuan, Dr Mohd Azaman Md Deros

  82. Velocity Measurements Using High-Speed Imaging System for Impact Test

    Article • Advanced Materials Research, February 2014, Trans Tech Publications

    Professor S.M. Sapuan

  83. Tropical Natural Fibre Composites

    Article • January 2014, Springer Science + Business Media

    Professor S.M. Sapuan

  84. Biopolymer

    Article • January 2014, Springer Science + Business Media

    Professor S.M. Sapuan

  85. Introduction

    Article • January 2014, Springer Science + Business Media

    Professor S.M. Sapuan

  86. Applications of Tropical Natural Fibre Composites

    Article • January 2014, Springer Science + Business Media

    Professor S.M. Sapuan

  87. Tropical Natural Fibres and Their Properties

    Article • January 2014, Springer Science + Business Media

    Professor S.M. Sapuan

  88. Manufacturing Techniques of Tropical Natural Fibre Composites

    Article • January 2014, Springer Science + Business Media

    Professor S.M. Sapuan

  89. Mechanical and Other Related Properties of Tropical Natural Fibre Composites

    Article • January 2014, Springer Science + Business Media

    Professor S.M. Sapuan

  90. Design and Materials Selection of Tropical Natural Fibre Composites

    Article • January 2014, Springer Science + Business Media

    Professor S.M. Sapuan

  91. Polylactic Acid-Based Kenaf Biomass Synthesized via Ring Opening Polymerization

    Article • January 2014, Springer Science + Business Media

    Professor S.M. Sapuan

  92. Processing and Properties of Date Palm Fibers and Its Composites

    Article • January 2014, Springer Science + Business Media

    Professor S.M. Sapuan, Dr Faris M. AL-Oqla, Dr Mohammad Jawaid

  93. Profile Measurement Based on Focus Variation Method for Geometrical Defect Evaluation: A Case Study of Cold Forged Propeller Blade

    Article • Advances in Mechanical Engineering, January 2014, SAGE Publications

    Professor S.M. Sapuan, Dr A B Abdullah

  94. A Review of the Flammability Factors of Kenaf and Allied Fibre Reinforced Polymer Composites

    Article • Advances in Materials Science and Engineering, January 2014, Hindawi Publishing Corporation

    Professor S.M. Sapuan

  95. Conceptual Design and Materials Selection of Components from Natural Fibre Composites

    Article • January 2014, Research Publishing Services

    Professor S.M. Sapuan

  96. Shrinkages and warpage in the processability of wood-filled polypropylene composite thin-walled parts formed by injection molding

    Article • Materials & Design (1980-2015), December 2013, Elsevier

    Professor S.M. Sapuan, Dr Mohd Azaman Md Deros

  97. Experimental Validation on Time Base Analysis of Various Aircraft CFRP Panel Conditions for Structural Health Monitoring

    Article • Key Engineering Materials, December 2013, Trans Tech Publications

    Professor S.M. Sapuan

  98. Hybrid natural and glass fibers reinforced polymer composites material selection using Analytical Hierarchy Process for automotive brake lever design

    Article • Materials & Design (1980-2015), October 2013, Elsevier

    Professor S.M. Sapuan

  99. Mechanical properties of hybrid glass/sugar palm fibre reinforced unsaturated polyester composites

    Article • Chinese Journal of Polymer Science, October 2013, Springer Science + Business Media

    Professor S.M. Sapuan

  100. Mechanical properties of soil buried kenaf fibre reinforced thermoplastic polyurethane composites

    Article • Materials & Design (1980-2015), September 2013, Elsevier

    Professor S.M. Sapuan, Dr Faris M. AL-Oqla

  101. New Technique for Conceptual Selection of Manufacturing Process and Material, Case Study: Metal Matrix Composite Component

    Article • Advanced Materials Research, September 2013, Trans Tech Publications

    Professor S.M. Sapuan

  102. An investigation of the processability of natural fibre reinforced polymer composites on shallow and flat thin-walled parts by injection moulding process

    Article • Materials & Design (1980-2015), September 2013, Elsevier

    Professor S.M. Sapuan, Dr Mohd Azaman Md Deros

  103. Alkaline-treated cocoa pod husk as adsorbent for removing methylene blue from aqueous solutions

    Article • Journal of Environmental Chemical Engineering, September 2013, Elsevier

    Professor S.M. Sapuan

  104. Mechanical and thermal properties of environmentally friendly composites derived from sugar palm tree

    Article • Materials & Design (1980-2015), August 2013, Elsevier

    Professor S.M. Sapuan

  105. Creep Test of Type Austenitic 316LStainless Steel at High Temperature

    Article • Applied Mechanics and Materials, August 2013, Trans Tech Publications

    Professor S.M. Sapuan

  106. Tensile Properties of Impregnated Sugar Palm (Arenga pinnata) Fibre Composite Filled Thermosetting Polymer Composites

    Article • Advanced Materials Research, May 2013, Trans Tech Publications

    Professor S.M. Sapuan, Dr Suhad D. Salman

  107. Fatigue Life for Type 316L Stainless Steel under Cyclic Loading

    Article • Advanced Materials Research, May 2013, Trans Tech Publications

    Professor S.M. Sapuan

  108. Flexural and Impact Properties of Biopolymer Derived from Sugar Palm Tree

    Article • Advanced Materials Research, May 2013, Trans Tech Publications

    Professor S.M. Sapuan

  109. Effect of Alkali Treatment on the Tensile Behavior and Structure of Betel Nut (Areca catechu) Husk Fiber

    Article • Advanced Materials Research, May 2013, Trans Tech Publications

    Professor S.M. Sapuan, Prof Mariatti M. Mariatti Jaafar

  110. Effect of Alkalization on Mechanical Properties of Water Hyacinth Fibers-Unsaturated Polyester Composites

    Article • Polymer-Plastics Technology and Engineering, April 2013, Taylor & Francis

    Professor S.M. Sapuan

  111. Geometrical Defect Evaluation of Cold Embossing AA6061 Based on FEA and Physical Modeling Technique

    Article • Applied Mechanics and Materials, April 2013, Trans Tech Publications

    Professor S.M. Sapuan

  112. Impregnation modification of sugar palm fibres with phenol formaldehyde and unsaturated polyester

    Article • Fibers and Polymers, February 2013, Springer Science + Business Media

    Professor S.M. Sapuan, Dr Suhad D. Salman

  113. Thermo-mechanical behaviors of thermoplastic starch derived from sugar palm tree (Arenga pinnata)

    Article • Carbohydrate Polymers, February 2013, Elsevier

    Professor S.M. Sapuan

  114. Effect of Fibre Surface Modification on Properties of Kenaf/Poly(vinyl alcohol) Composite Film

    Article • Journal of Biobased Materials and Bioenergy, February 2013, American Scientific Publishers

    Professor S.M. Sapuan

  115. Effect of Water Absorption on Mechanical Properties of Sugar Palm Fibre Reinforced Sugar Palm Starch (SPF/SPS) Biocomposites

    Article • Journal of Biobased Materials and Bioenergy, February 2013, American Scientific Publishers

    Professor S.M. Sapuan

  116. Materials Selection and Design

    Article • January 2013, Springer Science + Business Media

    Professor S.M. Sapuan

  117. Mechanical Failure of Materials

    Article • January 2013, Springer Science + Business Media

    Professor S.M. Sapuan

  118. Materials Selection Process

    Article • January 2013, Springer Science + Business Media

    Professor S.M. Sapuan

  119. Design Phases

    Article • January 2013, Springer Science + Business Media

    Professor S.M. Sapuan

  120. Materials Properties and Design

    Article • January 2013, Springer Science + Business Media

    Professor S.M. Sapuan

  121. Knowledge Based System in Materials Selection

    Article • January 2013, Springer Science + Business Media

    Professor S.M. Sapuan

  122. Overview of Materials Selection and Design

    Article • January 2013, Springer Science + Business Media

    Professor S.M. Sapuan

  123. Integrating TRIZ and AHP: A MPV‟s Utility Compartment Improvement Design Concepts

    Article • International Journal of Materials Mechanics and Manufacturing, January 2013, EJournal Publishing

    Professor S.M. Sapuan

  124. Numerical investigation of geometrical defect in cold forging of an AUV blade pin head

    Article • Journal of Manufacturing Processes, January 2013, Elsevier

    Professor S.M. Sapuan, Dr A B Abdullah

  125. Finite Element Analysis for Stress Distribution of Hand Tool Harvester

    Article • Procedia Engineering, January 2013, Elsevier

    Professor S.M. Sapuan, Mr soran jalal abdullah

  126. Review of Agro Waste Plastic Composites Production

    Article • Journal of Minerals and Materials Characterization and Engineering, January 2013, Scientific Research Publishing, Inc,

    Professor S.M. Sapuan

  127. Sustainable Composites

    Article • Advances in Materials Science and Engineering, January 2013, Hindawi Publishing Corporation

    Professor S.M. Sapuan

  128. Sugar palm (Arenga pinnata): Its fibres, polymers and composites

    Article • Carbohydrate Polymers, January 2013, Elsevier

    Professor S.M. Sapuan, Dr Suhad D. Salman

  129. Chemical Composition and FT-IR Spectra of Sugar Palm (Arenga pinnata) Fibers Obtained from Different Heights

    Article • Journal of Natural Fibers, January 2013, Taylor & Francis

    Professor S.M. Sapuan, Dr Suhad D. Salman

  130. Optimization of Blending Parameters and Fiber Size of Kenaf-Bast-Fiber-Reinforced the Thermoplastic Polyurethane Composites by Taguchi Method

    Article • Advances in Materials Science and Engineering, January 2013, Hindawi Publishing Corporation

    Professor S.M. Sapuan, Dr Mohd Azaman Md Deros, Dr Mohammad Jawaid

  131. Quality Evaluation of Cold Embossed Hole Based on Profile Measurement Technique

    Article • Advanced Materials Research, December 2012, Trans Tech Publications

    Professor S.M. Sapuan

  132. Simulation and Analysis for Harvesting Dioscorea hispida Tubers

    Article • Advanced Materials Research, December 2012, Trans Tech Publications

    Professor S.M. Sapuan, Mr soran jalal abdullah

  133. Generic Framework for Conceptual Design Using Concurrent Engineering Strategy. A Case Study: Advanced Material Application Product Development of Metal Matrix Composite Component

    Article • Advanced Materials Research, December 2012, Trans Tech Publications

    Professor S.M. Sapuan

  134. Effect of pMDI isocyanate additive on mechanical and thermal properties of Kenaf fibre reinforced thermoplastic polyurethane composites

    Article • Bulletin of Materials Science, December 2012, Springer Science + Business Media

    Professor S.M. Sapuan

  135. A New Concurrent Engineering – Multi Criteria Decision Making Technique for Conceptual Design Selection

    Article • Applied Mechanics and Materials, November 2012, Trans Tech Publications

    Professor S.M. Sapuan

  136. Effect of Die Modification to Geometrical Defect of Cold Forged AUV Propeller Blade

    Article • Advanced Materials Research, October 2012, Trans Tech Publications

    Professor S.M. Sapuan, Dr A B Abdullah

  137. Detection of defects of Kenaf/Epoxy by Thermography Analyses

    Article • IOP Conference Series Materials Science and Engineering, September 2012, Institute of Physics Publishing

    Professor S.M. Sapuan

  138. Investigation of geometrical defect in cold embossing of a pin head

    Article • IOP Conference Series Materials Science and Engineering, September 2012, Institute of Physics Publishing

    Professor S.M. Sapuan

  139. Influence of fiber content on the mechanical and thermal properties of Kenaf fiber reinforced thermoplastic polyurethane composites

    Article • Materials & Design (1980-2015), September 2012, Elsevier

    Professor S.M. Sapuan

  140. Development process of new bumper beam for passenger car: A review

    Article • Materials & Design (1980-2015), September 2012, Elsevier

    Professor S.M. Sapuan

  141. Flexural and impact properties of chemically treated sugar palm fiber reinforced high impact polystyrene composites

    Article • Fibers and Polymers, September 2012, Springer Science + Business Media

    Professor S.M. Sapuan

  142. A Structural Health Monitoring of a Pitch Catch Active Sensing of PZT Sensors on CFRP Panels: A Preliminary Approach

    Article • August 2012, IntechOpen

    Professor S.M. Sapuan

  143. Mechanical and Thermal Properties of Composites from Unsaturated Polyester Filled with Oil Palm Ash

    Article • JOURNAL OF MECHANICAL ENGINEERING AND SCIENCES, June 2012, Universiti Malaysia Pahang Publisher

    Professor S.M. Sapuan

  144. Effect of Accelerated Weathering on Tensile Properties of Kenaf Reinforced High-Density Polyethylene Composites

    Article • JOURNAL OF MECHANICAL ENGINEERING AND SCIENCES, June 2012, Universiti Malaysia Pahang Publisher

    Professor S.M. Sapuan

  145. Fabrication and characterization of Ni–SiC–Cr nanocomposite coatings

    Article • Applied Nanoscience, June 2012, Springer Science + Business Media

    Professor S.M. Sapuan

  146. IFSS, TG, FT-IR spectra of impregnated sugar palm (Arenga pinnata) fibres and mechanical properties of their composites

    Article • Journal of Thermal Analysis and Calorimetry, June 2012, Springer Science + Business Media

    Professor S.M. Sapuan, Dr Suhad D. Salman

  147. A General Method for Quantifying the Amorphous Phase in Nano Polycrystalline Materials

    Article • Modern Applied Science, May 2012, Canadian Center of Science and Education

    Professor S.M. Sapuan

  148. Mechanical properties and water absorption behavior of hybridized kenaf/pineapple leaf fibre-reinforced high-density polyethylene composite

    Article • Journal of Composite Materials, May 2012, SAGE Publications

    Professor S.M. Sapuan

  149. Detection of Defects in Natural Composite Materials Using Thermal Imaging Technique

    Article • Materials Testing, May 2012, Carl Hanser Verlag

    Professor S.M. Sapuan

  150. Twist Springback Measurement of AUV Propeller Blade Based on Profile Deviation

    Article • Advanced Materials Research, May 2012, Trans Tech Publications

    Professor S.M. Sapuan, Dr A B Abdullah

  151. Preparation, Characterization and Thermal Degradation of Polyimide (4-APS/BTDA)/SiO2 Composite Films

    Article • International Journal of Molecular Sciences, April 2012, MDPI AG

    Professor S.M. Sapuan, Professor MOHD ZOBIR HUSSEIN, Dr Arash Dehzangi

  152. Mechanical Properties of Screw Pine (Pandanus Odoratissimus) Fibers—Unsaturated Polyester Composites

    Article • Polymer-Plastics Technology and Engineering, March 2012, Taylor & Francis

    Professor S.M. Sapuan

  153. Effect of alkali treatment on mechanical and thermal properties of Kenaf fiber-reinforced thermoplastic polyurethane composite

    Article • Journal of Thermal Analysis and Calorimetry, February 2012, Springer Science + Business Media

    Professor S.M. Sapuan

  154. Modeling the technology transfer process in the petroleum industry: Evidence from Libya

    Article • Mathematical and Computer Modelling, February 2012, Elsevier

    Professor S.M. Sapuan

  155. Study of Hybridized Kenaf/Palf-Reinforced Hdpe Composites by Dynamic Mechanical Analysis

    Article • Polymer-Plastics Technology and Engineering, January 2012, Taylor & Francis

    Professor S.M. Sapuan

  156. Mechanical Properties of Sugar Palm Fibre Reinforced High Impact Polystyrene Composites

    Article • Procedia Chemistry, January 2012, Elsevier

    Professor S.M. Sapuan

  157. Effect of polybutylene terephthalate (PBT) on impact property improvement of hybrid kenaf/glass epoxy composite

    Article • Materials Letters, January 2012, Elsevier

    Professor S.M. Sapuan

  158. Exploring the Potential of Betel Nut Husk Fiber as Reinforcement in Polymer Composites: Effect of Fiber Maturity

    Article • Procedia Chemistry, January 2012, Elsevier

    Professor S.M. Sapuan, Prof Mariatti M. Mariatti Jaafar

  159. A New Approach to Use Arenga Pinnata as Sustainable Biopolymer: Effects of Plasticizers on Physical Properties

    Article • Procedia Chemistry, January 2012, Elsevier

    Professor S.M. Sapuan

  160. Detection of Defects in Kenaf/Epoxy using Infrared Thermal Imaging Technique

    Article • Procedia Chemistry, January 2012, Elsevier

    Professor S.M. Sapuan

  161. Alkali Treatment of Screw Pine (Pandanus Odoratissimus) Fibers and Its Effect on Unsaturated Polyester Composites

    Article • Polymer-Plastics Technology and Engineering, January 2012, Taylor & Francis

    Professor S.M. Sapuan

  162. Concept selection of car bumper beam with developed hybrid bio-composite material

    Article • Materials & Design (1980-2015), December 2011, Elsevier

    Professor S.M. Sapuan

  163. Geometrical Error Analysis of Cold Forged AUV Propeller Blade Using Optical Measurement Method

    Article • Advanced Materials Research, November 2011, Trans Tech Publications

    Professor S.M. Sapuan, Dr A B Abdullah

  164. Electron beam cross-linking of hybridized kenaf/pineapple leaf fiber-reinforced high-density polyethylene composite with and without cross-linking agents

    Article • Journal of Reinforced Plastics and Composites, November 2011, SAGE Publications

    Professor S.M. Sapuan

  165. Motorcyclist's Riding Discomfort in Malaysia: Comparison of BMI, Riding Experience, Riding Duration and Riding Posture

    Article • Human Factors and Ergonomics in Manufacturing & Service Industries, October 2011, Wiley

    Professor S.M. Sapuan

  166. Investigation of Geometrical Defect of AA6061-T4 Cold Embossing Using FEM

    Article • Applied Mechanics and Materials, October 2011, Trans Tech Publications

    Professor S.M. Sapuan

  167. Comparison of In Situ Polymerization and Solution-Dispersion Techniques in the Preparation of Polyimide/Montmorillonite (MMT) Nanocomposites

    Article • International Journal of Molecular Sciences, September 2011, MDPI AG

    Professor S.M. Sapuan

  168. Characterization of sugar palm (Arenga pinnata) fibres

    Article • Journal of Thermal Analysis and Calorimetry, July 2011, Springer Science + Business Media

    Professor S.M. Sapuan, Dr Suhad D. Salman

  169. Thermal property determination of hybridized kenaf/PALF reinforced HDPE composite by thermogravimetric analysis

    Article • Journal of Thermal Analysis and Calorimetry, July 2011, Springer Science + Business Media

    Professor S.M. Sapuan

  170. Differential Scanning Calorimetry (DSC) Analysis of Abaca Fibre (Musa Textile Nee) Reinforced High Impact Polystyrene (HIPS) Composites

    Article • Advanced Materials Research, July 2011, Trans Tech Publications

    Professor S.M. Sapuan

  171. Concurrent Decisions on Design Concept and Material Using Analytical Hierarchy Process at the Conceptual Design Stage

    Article • Concurrent Engineering, June 2011, SAGE Publications

    Professor S.M. Sapuan

  172. A framework for weighting of criteria in ranking stage of material selection process

    Article • The International Journal of Advanced Manufacturing Technology, May 2011, Springer Science + Business Media

    Professor S.M. Sapuan

  173. Development of Anti-Ballistic Board from Ramie Fiber

    Article • Polymer-Plastics Technology and Engineering, April 2011, Taylor & Francis

    Professor S.M. Sapuan

  174. A comprehensive VIKOR method for material selection

    Article • Materials & Design (1980-2015), March 2011, Elsevier

    Professor S.M. Sapuan

  175. Studying the effect of fiber size and fiber loading on the mechanical properties of hybridized kenaf/PALF-reinforced HDPE composite

    Article • Journal of Reinforced Plastics and Composites, March 2011, SAGE Publications

    Professor S.M. Sapuan

  176. The Effects of Thermal History on Tensile Properties of Poly(vinyl chloride) and its Composite with Sugarcane Bagasse

    Article • Journal of Thermoplastic Composite Materials, February 2011, SAGE Publications

    Professor S.M. Sapuan, Professor ROBIAH YUNUS

  177. Optimizing Processing Parameters for Hybridized Kenaf/PALF Reinforced HDPE Composite

    Article • Key Engineering Materials, February 2011, Trans Tech Publications

    Professor S.M. Sapuan

  178. Water Retention in Kenaf/Polypropylene Composites due to Repeated Immersion and Drying Conditions

    Article • Key Engineering Materials, February 2011, Trans Tech Publications

    Professor S.M. Sapuan

  179. Sugar Palm Fibre-Reinforced Unsaturated Polyester Composite Interface Characterisation by Pull-Out Test

    Article • Key Engineering Materials, February 2011, Trans Tech Publications

    Professor S.M. Sapuan, Dr Suhad D. Salman

  180. Selection of Polymeric Based Material Composite for Fibreglass Boat Components Using Expert System

    Article • Key Engineering Materials, February 2011, Trans Tech Publications

    Professor S.M. Sapuan

  181. Natural Frequency of F.G. Rectangular Plate by Shear Deformation Theory

    Article • IOP Conference Series Materials Science and Engineering, February 2011, Institute of Physics Publishing

    Professor S.M. Sapuan

  182. Comparative Study of Physical Properties Based on Different Parts of Sugar Palm Fibre Reinforced Unsaturated Polyester Composites

    Article • Key Engineering Materials, February 2011, Trans Tech Publications

    Professor S.M. Sapuan

  183. Investigation on Bending Strength and Stiffness of Sugar Palm Fibre from Different Parts Reinforced Unsaturated Polyester Composites

    Article • Key Engineering Materials, February 2011, Trans Tech Publications

    Professor S.M. Sapuan

  184. Effects of Impregnation Time on Physical and Tensile Properties of Impregnated Sugar Palm (Arenga pinnata) Fibres

    Article • Key Engineering Materials, February 2011, Trans Tech Publications

    Professor S.M. Sapuan, Dr Suhad D. Salman

  185. Effects of Impregnation Pressure on Physical and Tensile Properties of Impregnated Sugar Palm (Arenga pinnata) Fibres

    Article • Key Engineering Materials, February 2011, Trans Tech Publications

    Professor S.M. Sapuan, Dr Suhad D. Salman

  186. Thermal Free Vibration Analysis of Temperature-Dependent Functionally Graded Plates Using Second Order Shear Deformation

    Article • Key Engineering Materials, February 2011, Trans Tech Publications

    Professor S.M. Sapuan

  187. Optimal Sintering Procedure to Fabrication of Functionally Graded Hydroxyapatite-Titanium

    Article • Key Engineering Materials, February 2011, Trans Tech Publications

    Professor S.M. Sapuan

  188. Optimizing Processing Parameters and Fiber Size for Kenaf Fiber Reinforced Thermoplastic Polyurethane Composite

    Article • Key Engineering Materials, February 2011, Trans Tech Publications

    Professor S.M. Sapuan

  189. Effect of Fibre Size and Fibre Loading on Tensile Properties of Hybridized Kenaf/PALF Reinforced HDPE Composite

    Article • Key Engineering Materials, February 2011, Trans Tech Publications

    Professor S.M. Sapuan

  190. Tensile and Flexural Behavior of Hybrid Banana Pseudostem/Glass Fibre Reinforced Polyester Composites

    Article • Key Engineering Materials, February 2011, Trans Tech Publications

    Professor S.M. Sapuan

  191. Effect of Fiber Loading on the Mechanical Properties of Kenaf Fiber Reinforced Thermoplastic Polyurethane Composite

    Article • Key Engineering Materials, February 2011, Trans Tech Publications

    Professor S.M. Sapuan

  192. Flexural Mechanical Characteristic of Sawdust and Chipwood Filled Epoxy Composites

    Article • Key Engineering Materials, February 2011, Trans Tech Publications

    Professor S.M. Sapuan

  193. Tensile Properties and Micromorphologies of Sawdust and Chipwood Filled Epoxy Composites

    Article • Key Engineering Materials, February 2011, Trans Tech Publications

    Professor S.M. Sapuan

  194. Effect of Filler Loading and Coupling Agent on Tensile and Impact Properties of Polypropylene with Oil Palm Ash Composites

    Article • Key Engineering Materials, February 2011, Trans Tech Publications

    Professor S.M. Sapuan

  195. A Structural Health Monitoring of a Pitch Catch Active Sensing of PZT Sensor on Normal, Damage and Repair Aircraft Spoiler

    Article • Key Engineering Materials, February 2011, Trans Tech Publications

    Professor S.M. Sapuan

  196. Investigation of Hardness of Short Abaca (Musa Textile Nee) Fibre-Reinforced High Impact Polystyrene (HIPS) Composites by Response Surface Methodology

    Article • Key Engineering Materials, February 2011, Trans Tech Publications

    Professor S.M. Sapuan

  197. Non-Destructive Techniques (NDT) in Composite Materials

    Article • Key Engineering Materials, January 2011, Trans Tech Publications

    Professor S.M. Sapuan

  198. Pineapple Leaf Fibers and PALF-Reinforced Polymer Composites

    Article • January 2011, Springer Science + Business Media

    Professor S.M. Sapuan

  199. Mechanical properties of hybrid kenaf/glass reinforced epoxy composite for passenger car bumper beam

    Article • Materials & Design (1980-2015), December 2010, Elsevier

    Professor S.M. Sapuan

  200. Properties of sugarcane bagasse/ poly(vinyl chloride) composites after various treatments

    Article • Journal of Composite Materials, October 2010, SAGE Publications

    Professor S.M. Sapuan, Professor ROBIAH YUNUS

  201. Elastic and viscoelastic properties of sugarcane bagasse-filled poly(vinyl chloride) composites

    Article • Journal of Thermal Analysis and Calorimetry, October 2010, Springer Science + Business Media

    Professor S.M. Sapuan, Professor ROBIAH YUNUS

  202. Effects of Simple Abrasive Combing and Pretreatments on the Properties of Pineapple Leaf Fibers (Palf) and Palf-Vinyl Ester Composite Adhesion

    Article • Polymer-Plastics Technology and Engineering, August 2010, Taylor & Francis

    Professor S.M. Sapuan

  203. Material selection based on ordinal data

    Article • Materials & Design (1980-2015), August 2010, Elsevier

    Professor S.M. Sapuan

  204. Second-Order Shear Deformation Theory to Analyze Stress Distribution for Solar Functionally Graded Plates#

    Article • Mechanics Based Design of Structures and Machines, July 2010, Taylor & Francis

    Professor S.M. Sapuan

  205. Material Optimization of Carbon/Epoxy Composite Rotor for Spacecraft Energy Storage

    Article • The International Journal of Multiphysics, July 2010, Multiphysics

    Professor S.M. Sapuan

  206. English

    Article • International Journal of Automotive and Mechanical Engineering, June 2010, Universiti Malaysia Pahang Publisher

    Professor S.M. Sapuan

  207. 9th National Symposium on Polymeric Materials (NSPM 2009)

    Article • IOP Conference Series Materials Science and Engineering, June 2010, Institute of Physics Publishing

    Professor S.M. Sapuan

  208. Thermoplastic impact property improvement in hybrid natural fibre epoxy composite bumper beam

    Article • IOP Conference Series Materials Science and Engineering, May 2010, Institute of Physics Publishing

    Professor S.M. Sapuan

  209. Flexural properties of sugarcane bagasse pith and rind reinforced poly(vinyl chloride)

    Article • IOP Conference Series Materials Science and Engineering, May 2010, Institute of Physics Publishing

    Professor S.M. Sapuan, Professor ROBIAH YUNUS

  210. The tensile properties of single sugar palm (Arenga pinnata) fibre

    Article • IOP Conference Series Materials Science and Engineering, May 2010, Institute of Physics Publishing

    Professor S.M. Sapuan

  211. The effect of electron beam irradiation on the mechanical properties of pineapple leaf fibre (PALF) reinforced high impact polystyrene (HIPS) composites

    Article • IOP Conference Series Materials Science and Engineering, May 2010, Institute of Physics Publishing

    Professor S.M. Sapuan

  212. Mechanical properties of kenaf bast and core fibre reinforced unsaturated polyester composites

    Article • IOP Conference Series Materials Science and Engineering, May 2010, Institute of Physics Publishing

    Professor S.M. Sapuan

  213. Mechanical properties and fabrication of small boat using woven glass/sugar palm fibres reinforced unsaturated polyester hybrid composite

    Article • IOP Conference Series Materials Science and Engineering, May 2010, Institute of Physics Publishing

    Professor S.M. Sapuan

  214. Material selection of polymeric composite automotive bumper beam using analytical hierarchy process

    Article • Journal of Central South University of Technology, April 2010, Springer Science + Business Media

    Professor S.M. Sapuan

  215. Material screening and choosing methods – A review

    Article • Materials & Design (1980-2015), February 2010, Elsevier

    Professor S.M. Sapuan

  216. Composite Materials Technology

    Article • December 2009, Taylor & Francis

    Professor S.M. Sapuan

  217. Application of Artificial Neural Network in Composites Materials

    Article • December 2009, Taylor & Francis

    Professor S.M. Sapuan

  218. Damage Identification and Localization of Carbon Fiber–Reinforced Plastic Composite Plate Using Outlier Analysis and Multilayer Perceptron Neural Network

    Article • December 2009, Taylor & Francis

    Professor S.M. Sapuan

  219. Development of a Prototype Computational Framework for Selection of Natural Fiber-Reinforced Polymer Composite Materials Using Neural Network

    Article • December 2009, Taylor & Francis

    Professor S.M. Sapuan

  220. Damage Localization of Carbon Fiber–Reinforced Plastic Composite and Perspex Plates Using Novelty Indices and the Cross-Validation Set of Multilayer Perceptron Neural Network

    Article • December 2009, Taylor & Francis

    Professor S.M. Sapuan

  221. Coating Performance in High Speed Micro Machining of H13 Tool Steel

    Article • Advanced Materials Research, December 2009, Trans Tech Publications

    Professor S.M. Sapuan

  222. The Effect of Technology Transfer Factors on Performance: An Empirical Study of Libyan Petroleum Industry

    Article • American Journal of Applied Sciences, September 2009, Science Publications

    Professor S.M. Sapuan

  223. State of the Art Review of Engineering Materials Selection Methods

    Article • Multidiscipline Modeling in Materials and Structures, August 2009, Emerald

    Professor S.M. Sapuan

  224. The Influence of Alkaline Surface Fibre Treatment on the Impact Properties of Sugar Palm Fibre-Reinforced Epoxy Composites

    Article • Polymer-Plastics Technology and Engineering, April 2009, Taylor & Francis

    Professor S.M. Sapuan

  225. State of the Art Review of Engineering Materials Selection Methods

    Article • Multidiscipline Modeling in Materials and Structures, March 2009, Emerald

    Professor S.M. Sapuan

  226. Optimal Design for a Thermosyphon Solar Water Heater Convenient for Malaysia

    Article • Multidiscipline Modeling in Materials and Structures, March 2009, Emerald

    Professor S.M. Sapuan

  227. Impact Strength and Hardness Properties of Banana Pseudo‐Stem Filled Unplastisized PVC Composites

    Article • Multidiscipline Modeling in Materials and Structures, March 2009, Emerald

    Professor S.M. Sapuan

  228. Thermal degradation of banana pseudo-stem filled unplasticized polyvinyl chloride (UPVC) composites

    Article • Materials & Design (1980-2015), March 2009, Elsevier

    Professor S.M. Sapuan

  229. Application of Analytical Hierarchy Process (AHP) and Sensitivity Analysis for Selecting the Best Design Concepts during Conceptual Design Stage

    Article • Multidiscipline Modeling in Materials and Structures, March 2009, Emerald

    Professor S.M. Sapuan

  230. Effect of curing time on physical and mechanical properties of phenolic-treated bamboo strips

    Article • Industrial Crops and Products, January 2009, Elsevier

    Professor S.M. Sapuan

  231. Mechanical Properties of Compression Molded Banana Pseudo-stem Filled Unplasticized Polyvinyl Chloride (UPVC) Composites

    Article • Polymer-Plastics Technology and Engineering, December 2008, Taylor & Francis

    Professor S.M. Sapuan

  232. Use of Analytical Hierarchy Process (AHP) for Selecting The Best Design Concept

    Article • Jurnal Teknologi (Sciences & Engineering), December 2008, Penerbit UTM Press

    Professor S.M. Sapuan

  233. Theoretical Analysis for Calculation of the Through Thickness Effective Constants for Orthotropic Thick Filament Wound Tubes

    Article • Polymer-Plastics Technology and Engineering, September 2008, Taylor & Francis

    Professor S.M. Sapuan

  234. Internal Pressure Carrying Capacity for Different Loading Modes of Filament-Wound Pipes from Glass Fiber-reinforced Epoxy Composites

    Article • Polymer-Plastics Technology and Engineering, July 2008, Taylor & Francis

    Professor S.M. Sapuan

  235. Preparation of Conjugatedp-Aminobenzamidine on Thermosensitive Poly(NIPAM) by Irradiation Grafted Process

    Article • Polymer-Plastics Technology and Engineering, June 2008, Taylor & Francis

    Professor S.M. Sapuan

  236. The Effect of Environmental Treatments on Fiber Surface Properties and Tensile Strength of Sugar Palm Fiber-Reinforced Epoxy Composites

    Article • Polymer-Plastics Technology and Engineering, May 2008, Taylor & Francis

    Professor S.M. Sapuan, Dr Suhad D. Salman

  237. Analysis of glass fibre reinforced epoxy composite hovercraft hull base

    Article • Materials & Design (1980-2015), January 2008, Elsevier

    Professor S.M. Sapuan

  238. Conceptual design of a polymer composite automotive bumper energy absorber

    Article • Materials & Design (1980-2015), January 2008, Elsevier

    Professor S.M. Sapuan, Professor ROBIAH YUNUS

  239. The effect of alkaline treatment on tensile properties of sugar palm fibre reinforced epoxy composites

    Article • Materials & Design (1980-2015), January 2008, Elsevier

    Professor S.M. Sapuan

  240. Development of controllers for a nonlinear quarter car active suspension system

    Article • International Journal of Vehicle Autonomous Systems, January 2008, Inderscience Publishers

    Professor S.M. Sapuan

  241. Moisture absorption behavior of sugar palm fiber reinforced epoxy composites

    Article • Materials & Design (1980-2015), January 2008, Elsevier

    Professor S.M. Sapuan, Dr Suhad D. Salman

  242. Experimental Study of Bending Fatigue Characteristics of a Hybrid Aluminum/Composite Drive Shaft

    Article • Journal of Composite Materials, September 2007, SAGE Publications

    Professor S.M. Sapuan

  243. Using the morphological chart technique for the design of polymeric-based composite automotive pedals

    Article • Discovery and Innovation, July 2007, African Journals Online (AJOL)

    Professor S.M. Sapuan

  244. Fretting fatigue crack initiation: An experimental and theoretical study

    Article • International Journal of Fatigue, July 2007, Elsevier

    Elsadig Ahmed, Professor S.M. Sapuan

  245. Pressure Carrying Capacity of Reinforced Plastic Tubes

    Article • Polymer-Plastics Technology and Engineering, June 2007, Taylor & Francis

    Professor S.M. Sapuan

  246. Effect of Skin Removal from Spherical Fruits and Vegetables

    Article • American Journal of Food Technology, April 2007, Science Alert

    Professor S.M. Sapuan

  247. Static and dynamic characteristics of a hybrid aluminium/composite drive shaft

    Article • Proceedings of the Institution of Mechanical Engineers Part L Journal of Materials Design and Applications, April 2007, SAGE Publications

    Professor S.M. Sapuan

  248. Study of Interfacial Adhesion of Tensile Specimens of Arenga Pinnata Fiber Reinforced Composites

    Article • Multidiscipline Modeling in Materials and Structures, April 2007, Emerald

    Professor S.M. Sapuan

  249. Wear analysis of centrifugal slurry pump impellers

    Article • Industrial Lubrication and Tribology, February 2007, Emerald

    Professor S.M. Sapuan

  250. The use of Taguchi method in the design of plastic injection mould for reducing warpage

    Article • Journal of Materials Processing Technology, February 2007, Elsevier

    Professor S.M. Sapuan

  251. A Naïve-Bayes classifier for damage detection in engineering materials

    Article • Materials & Design (1980-2015), January 2007, Elsevier

    Professor S.M. Sapuan

  252. Thermal Diffusivity Variation Study of Cold Stored Malaysian Pangasius Sutchi at 10°C

    Article • International Journal of Food Properties, December 2006, Taylor & Francis

    Professor S.M. Sapuan

  253. Synthesis and Thermal Characterization of Polyurethane/Clay Nanocomposites Based on Palm Oil Polyol

    Article • Polymer-Plastics Technology and Engineering, December 2006, Taylor & Francis

    Professor S.M. Sapuan

  254. Shelf life assessment of MalaysianPangasius sutchi during cold storage

    Article • Sadhana, October 2006, Springer Science + Business Media

    Professor S.M. Sapuan

  255. Construction performance comparison between conventional and industrialised building systems in Malaysia

    Article • Structural Survey, October 2006, Emerald

    Professor S.M. Sapuan

  256. Numerical analysis of heat transfer in cooling of fish packages

    Article • International Communications in Heat and Mass Transfer, August 2006, Elsevier

    Professor S.M. Sapuan

  257. State of the art of the concurrent engineering technique in the automotive industry

    Article • Journal of Engineering Design, April 2006, Taylor & Francis

    Professor S.M. Sapuan

  258. The Simulation Study of the Effect of Single and Double Gated Molds on Pressure and Temperature in Injection Molding of Polymeric Composite Clutch Pedals

    Article • Multidiscipline Modeling in Materials and Structures, March 2006, Emerald

    Professor S.M. Sapuan

  259. Tensile Properties ofArenga pinnataFiber-Reinforced Epoxy Composites

    Article • Polymer-Plastics Technology and Engineering, February 2006, Taylor & Francis

    Professor S.M. Sapuan

  260. Mould flow and component design analysis of polymeric based composite automotive clutch pedals

    Article • Journal of Materials Processing Technology, February 2006, Elsevier

    Professor S.M. Sapuan

  261. Mechanical properties of woven banana fibre reinforced epoxy composites

    Article • Materials & Design (1980-2015), January 2006, Elsevier

    Professor S.M. Sapuan

  262. Design and thermal analysis of plastic injection mould

    Article • Journal of Materials Processing Technology, January 2006, Elsevier

    Professor S.M. Sapuan

  263. Mechanical properties of pineapple leaf fibre reinforced polypropylene composites

    Article • Materials & Design (1980-2015), January 2006, Elsevier

    Professor S.M. Sapuan

  264. Concurrent design and manufacturing process of automotive composite components

    Article • Assembly Automation, June 2005, Emerald

    Professor S.M. Sapuan

  265. Consumer's Acceptability Estimation of Cold Preserved Malaysian Freshwater Patin

    Article • American Journal of Applied Sciences, May 2005, Science Publications

    Professor S.M. Sapuan

  266. Performance Comparison between Structural Element of Building Systems in Malaysia

    Article • American Journal of Applied Sciences, May 2005, Science Publications

    Professor S.M. Sapuan

  267. Mechanical and Electrical Properties of Coconut Coir Fiber-Reinforced Polypropylene Composites

    Article • Polymer-Plastics Technology and Engineering, May 2005, Taylor & Francis

    Professor S.M. Sapuan

  268. A study of the comparison of `V' and `X' ribbing in a composite pedal using mold flow analysis software

    Article • Materials & Design (1980-2015), April 2005, Elsevier

    Professor S.M. Sapuan

  269. Manpower Consideration to Reduce Development Time for New Model in Automotive Industry

    Article • American Journal of Applied Sciences, April 2005, Science Publications

    Professor S.M. Sapuan

  270. Numerical analysis of emission component from incineration of palm oil wastes

    Article • Biomass and Bioenergy, March 2005, Elsevier

    Professor S.M. Sapuan

  271. Design and fabrication of natural woven fabric reinforced epoxy composite for household telephone stand

    Article • Materials & Design (1980-2015), February 2005, Elsevier

    Professor S.M. Sapuan

  272. Factors affecting construction labour productivity for Malaysian residential projects

    Article • Structural Survey, February 2005, Emerald

    Professor S.M. Sapuan

  273. A Conceptual Design of the Concurrent Engineering Design System for Polymeric-Based Composite Automotive Pedals

    Article • American Journal of Applied Sciences, February 2005, Science Publications

    Professor S.M. Sapuan

  274. The Effectiveness of Quality Circle Participation in Industrial and Service Organizations in Malaysia

    Article • Journal of Social Sciences, January 2005, Science Publications

    Professor S.M. Sapuan

  275. A note on the conceptual design of polymeric composite automotive bumper system

    Article • Journal of Materials Processing Technology, January 2005, Elsevier

    Professor S.M. Sapuan

  276. Prediction of the thermal performance of solar air heaters by Internet-based mathematical simulation

    Article • Proceedings of the Institution of Mechanical Engineers Part A Journal of Power and Energy, December 2004, SAGE Publications

    Professor S.M. Sapuan

  277. Estimation of surface film conductance during cooling of fish packages

    Article • Proceedings of the Institution of Mechanical Engineers Part E Journal of Process Mechanical Engineering, November 2004, SAGE Publications

    Professor S.M. Sapuan

  278. Finite Difference Solution for Precooling Process of Fish Packages

    Article • American Journal of Applied Sciences, April 2004, Science Publications

    Professor S.M. Sapuan

  279. Further Improvements in Temperature Calculation During Cooling of Fish Packages

    Article • American Journal of Applied Sciences, February 2004, Science Publications

    Professor S.M. Sapuan

  280. Explicit Finite Difference Solution of Heat Transfer Problems of Fish Packages in Precooling

    Article • American Journal of Applied Sciences, February 2004, Science Publications

    Professor S.M. Sapuan

  281. A computer‐based intelligent system for fault diagnosis of an aircraft engine

    Article • Engineering Computations, January 2004, Emerald

    Professor S.M. Sapuan

  282. Vegetable‐based biodegradable lubricating oil additives

    Article • Industrial Lubrication and Tribology, June 2003, Emerald

    Professor S.M. Sapuan

  283. A prototype knowledge-based system for material selection of ceramic matrix composites of automotive engine components

    Article • Materials & Design (1980-2015), December 2002, Elsevier

    Professor S.M. Sapuan

  284. A knowledge-based system for materials selection in mechanical engineering design

    Article • Materials & Design (1980-2015), December 2001, Elsevier

    Professor S.M. Sapuan

  285. Elastohydrodynamic lubrication study of hard rolling contact using boundary element method

    Article • Industrial Lubrication and Tribology, August 2001, Emerald

    Professor S.M. Sapuan

  286. A prototype knowledge-based system for the material selection of polymeric-based composites for automotive components

    Article • Composites Part A Applied Science and Manufacturing, July 1998, Elsevier

    Professor S.M. Sapuan

  287. The Use of Palm Oil as Diesel Fuel Substitute

    Article • Proceedings of the Institution of Mechanical Engineers Part A Journal of Power and Energy, February 1996, SAGE Publications

    Professor S.M. Sapuan

  288. Palm oil methyl esters as lubricant additive in a small diesel engine

    Article • Oil & Soap, May 1995, Wiley

    Professor S.M. Sapuan

  289. A rapid test to measure performance, emission and wear of a diesel engine fueled with palm oil diesel

    Article • Oil & Soap, October 1993, Wiley

    Professor S.M. Sapuan