All Stories

  1. Thermal, mechanical, and morphological properties of oil palm cellulose nanofibril reinforced green epoxy nanocomposites

    Article • International Journal of Biological Macromolecules, October 2024, Elsevier

    Dr. R.A. Ilyas

  2. Optimizing DMF Utilization for Improved MXene Dispersions in Epoxy Nanocomposites

    Article • Journal of Composites Science, August 2024, MDPI AG

    Dr. R.A. Ilyas

  3. Optimizing DMF Utilization for Improved MXene Dispersions in Epoxy Nanocomposites

    Article • July 2024, MDPI AG

    Dr. R.A. Ilyas

  4. A review: The state-of-the-art of arsenic removal in wastewater

    Article • Water Reuse, July 2024, IWA Publishing

    Dr. R.A. Ilyas

  5. A state-of-art review on the sustainable technologies for cadmium removal from wastewater

    Article • Water Reuse, July 2024, IWA Publishing

    Dr. R.A. Ilyas

  6. Isolation and characterization of cellulose from sugarcane bagasse fiber (Saccharum officinarum) via delignification and mercerization treatment using response surface modeling (RSM)

    Article • Biomass Conversion and Biorefinery, May 2024, Springer Science + Business Media

    Dr. R.A. Ilyas

  7. Unveiling the physico‐mechanical properties of kenaf yarn fiber‐reinforced acrylonitrile butadiene styrene composites: Effect of quasi‐isotropic lay‐up sequences

    Article • Polymer Composites, April 2024, Wiley

    Dr. R.A. Ilyas

  8. Improving wear performance, physical, and mechanical properties of iron sand/epoxy composite modified with carbon powder

    Article • Results in Materials, March 2024, Elsevier

    Dr. R.A. Ilyas

  9. Innovative ionic liquid pretreatment followed by wet disk milling treatment provides enhanced properties of sugar palm nano-fibrillated cellulose

    Article • Heliyon, March 2024, Elsevier

    Dr. R.A. Ilyas

  10. Correction: Nordin et al. The State of the Art of Natural Polymer Functionalized Fe3O4 Magnetic Nanoparticle Composites for Drug Delivery Applications: A Review. Gels 2023, 9, 121

    Article • Gels, January 2024, MDPI AG

    Dr. R.A. Ilyas

  11. Comparative Analysis of the Influence of Different Preparation Methods on the Properties of TEMPO-Oxidized Bacterial Cellulose Powder Films

    Article • Journal of Natural Fibers, January 2024, Taylor & Francis

    Dr. R.A. Ilyas

  12. Isolation and Characterization of Cellulose from Pomegranate ( Punica granatum ) Peel

    Article • Journal of Natural Fibers, January 2024, Taylor & Francis

    Dr. R.A. Ilyas

  13. Revolutionizing lignocellulosic biomass: A review of harnessing the power of ionic liquids for sustainable utilization and extraction

    Article • International Journal of Biological Macromolecules, January 2024, Elsevier

    Dr. R.A. Ilyas

  14. Crash Performance of Automotive Bio-Composite Crash Box Using Finite Element Analysis

    Article • January 2024, Springer Science + Business Media

    Dr. R.A. Ilyas

  15. A practical green synthesis method of Ag NPs using rosy periwinkle plant leaves for solar panel coating

    Article • Heliyon, December 2023, Elsevier

    Dr. R.A. Ilyas

  16. Bentonite clay as a nanofiller for food packaging applications

    Article • Trends in Food Science & Technology, December 2023, Elsevier

    Dr. R.A. Ilyas

  17. Thermal, mechanical, thermo‐mechanical and morphological properties of graphene nanoplatelets reinforced green epoxy nanocomposites

    Article • Polymer Composites, November 2023, Wiley

    Dr. R.A. Ilyas

  18. Exploring nanocellulose frontiers: A comprehensive review of its extraction, properties, and pioneering applications in the automotive and biomedical industries

    Article • International Journal of Biological Macromolecules, November 2023, Elsevier

    Dr. R.A. Ilyas

  19. Effect of the Bambusa vulgaris , Gigantochloa levis , and Gigantochloa scortechinii Pulp Loading on Mechanical Properties of Recycled Paper

    Article • Journal of Natural Fibers, November 2023, Taylor & Francis

    Dr. R.A. Ilyas

  20. Development and Characterization of Sugar Palm ( Arenga Pinnata (Wurmb. Merr) ) Fiber Reinforced Cassava ( Manihot esculenta ) Starch Biopolymer Composites

    Article • Journal of Natural Fibers, October 2023, Taylor & Francis

    Dr. R.A. Ilyas

  21. Controlling the critical parameters of ultrasonication to affect the dispersion state, isolation, and chiral nematic assembly of cellulose nanocrystals

    Article • Ultrasonics Sonochemistry, October 2023, Elsevier

    Dr. R.A. Ilyas

  22. Effect of durian peel fiber on thermal, mechanical, and biodegradation characteristics of thermoplastic cassava starch composites

    Article • International Journal of Biological Macromolecules, October 2023, Elsevier

    Dr. R.A. Ilyas

  23. Effect of Pandanus Amaryllifolius Fibre on Physio-Mechanical, Thermal and Biodegradability of Thermoplastic Cassava Starch/Beeswax Composites

    Article • Journal of Polymers and the Environment, September 2023, Springer Science + Business Media

    Dr. R.A. Ilyas

  24. Sustainable substrate tin oxide/nanofibril cellulose/thermoplastic starch: dimensional stability and tensile properties

    Article • Journal of Materials Research and Technology, September 2023, Elsevier

    Dr. R.A. Ilyas

  25. Enhanced UV blocking, tensile and thermal properties of bendable TEMPO-oxidized bacterial cellulose powder-based films immersed in PVA/Uncaria gambir/ZnO solution

    Article • Journal of Materials Research and Technology, August 2023, Elsevier

    Dr. R.A. Ilyas

  26. Starch-Based Polymer Materials as Advanced Adsorbents for Sustainable Water Treatment: Current Status, Challenges, and Future Perspectives

    Article • Polymers, July 2023, MDPI AG

    Dr. R.A. Ilyas

  27. The Effect of Active Alkali and Sulfidity Loading on the Kraft Pulp Properties of Sweet Sorghum Bagasse

    Article • Sugar Tech, July 2023, Springer Science + Business Media

    Dr. R.A. Ilyas

  28. Corn starch nanocomposite films reinforced with nanocellulose

    Article • Physical Sciences Reviews, June 2023, De Gruyter

    Dr. R.A. Ilyas

  29. Regulations for food packaging materials

    Article • Physical Sciences Reviews, June 2023, De Gruyter

    Dr. R.A. Ilyas

  30. Plant-Based Natural Fibers For Food Packaging: A Green Approach To The Reinforcement of Biopolymers

    Article • Journal of Polymers and the Environment, June 2023, Springer Science + Business Media

    Dr. R.A. Ilyas

  31. Cassava starch nanocomposite films reinforced with nanocellulose

    Article • Physical Sciences Reviews, June 2023, De Gruyter

    Dr. R.A. Ilyas

  32. Banana starch nanocomposite films reinforced with nanocellulose

    Article • Physical Sciences Reviews, May 2023, De Gruyter

    Dr. R.A. Ilyas

  33. Morphological, water barrier and biodegradable properties of sugar palm nanocellulose/starch biopolymer composites incorporated with cinnamon essential oils

    Article • Physical Sciences Reviews, May 2023, De Gruyter

    Dr. R.A. Ilyas

  34. Araucaria Araucana thermoplastic starch nanocomposite films reinforced with nanocellulose

    Article • Physical Sciences Reviews, May 2023, De Gruyter

    Dr. R.A. Ilyas

  35. Nanocellulose: from biosources to nanofiber and their applications

    Article • Physical Sciences Reviews, May 2023, De Gruyter

    Dr. R.A. Ilyas

  36. Sugar palm (Arenga p innata) thermoplastic starch nanocomposite films reinforced with nanocellulose

    Article • Physical Sciences Reviews, May 2023, De Gruyter

    Dr. R.A. Ilyas

  37. Recent Advances in Using Adsorbent Derived from Agricultural Waste for Antibiotics and Non-Steroidal Anti-Inflammatory Wastewater Treatment: A Review

    Article • Separations, May 2023, MDPI AG

    Dr. R.A. Ilyas

  38. Behavior of stiffened concrete-filled steel tube columns infilled with nanomaterial-based concrete subjected to axial compression

    Article • Journal of Materials Research and Technology, May 2023, Elsevier

    Dr. R.A. Ilyas

  39. Introduction to bio-based packaging materials

    Article • Physical Sciences Reviews, April 2023, De Gruyter

    Dr. R.A. Ilyas

  40. Fabrication of bio-fiber based Eichhornia crassipes/Al2O3 particles hybrid biocomposites and investigation of important properties

    Article • Proceedings of the Institution of Mechanical Engineers Part E Journal of Process Mechanical Engineering, April 2023, SAGE Publications

    Dr. R.A. Ilyas

  41. Coral derived nano calcium carbonate incorporated acrylonitrile butadiene rubber composites: Green look at properties

    Article • Journal of Polymer Research, April 2023, Springer Science + Business Media

    Dr. R.A. Ilyas

  42. Pea thermoplastic starch nanocomposite films reinforced with nanocellulose

    Article • Physical Sciences Reviews, April 2023, De Gruyter

    Dr. R.A. Ilyas

  43. Effect of corn husk fibre loading on thermal and biodegradable properties of kenaf/cornhusk fibre reinforced corn starch-based hybrid composites

    Article • Heliyon, April 2023, Elsevier

    Dr. R.A. Ilyas

  44. Effect of Reinforcement of Alkaline-Treated Sugar Palm/Bamboo/Kenaf and Fibreglass/ Kevlar with Polyester Hybrid Biocomposites: Mechanical, Morphological, and Water Absorption Properties

    Article • Journal of Materials Research and Technology, April 2023, Elsevier

    Dr. R.A. Ilyas

  45. Sugar Palm (Arenga Pinnata) Fibers: New Emerging Natural Fibre and its Relevant Properties, Treatments and Potential Applications

    Article • Journal of Materials Research and Technology, April 2023, Elsevier

    Dr. R.A. Ilyas

  46. Horse chestnut thermoplastic starch nanocomposite films reinforced with nanocellulose

    Article • Physical Sciences Reviews, March 2023, De Gruyter

    Dr. R.A. Ilyas

  47. Natural Polymeric Composites Derived from Animals, Plants, and Microbes for Vaccine Delivery and Adjuvant Applications: A Review

    Article • Gels, March 2023, MDPI AG

    Dr. R.A. Ilyas

  48. Advances in Sustainable Nanocomposites

    Article • Sustainability, March 2023, MDPI AG

    Dr. R.A. Ilyas

  49. Mechanical degradation of sugar palm crystalline nanocellulose reinforced thermoplastic sugar palm starch (TPS)/poly (lactic acid) (PLA) blend bionanocomposites in aqueous environments

    Article • Physical Sciences Reviews, March 2023, De Gruyter

    Dr. R.A. Ilyas

  50. Wheat thermoplastic starch composite films reinforced with nanocellulose

    Article • Physical Sciences Reviews, March 2023, De Gruyter

    Dr. R.A. Ilyas

  51. Green surface functionalization of chitosan with spent tea waste extract for the development of an efficient adsorbent for aspirin removal

    Article • Environmental Science and Pollution Research, February 2023, Springer Science + Business Media

    Dr. R.A. Ilyas

  52. The State of the Art of Natural Polymer Functionalized Fe3O4 Magnetic Nanoparticle Composites for Drug Delivery Applications: A Review

    Article • Gels, February 2023, MDPI AG

    Dr. R.A. Ilyas

  53. Effect of sugar palm fibers on the properties of blended wheat starch/polyvinyl alcohol (PVA) -based biocomposite films

    Article • Journal of Materials Research and Technology, February 2023, Elsevier

    Dr. R.A. Ilyas

  54. Effect of Black Seed Fiber, on the Physical, Thermal, Mechanical, Morphological, and Biodegradation Properties of Cornstarch-Based Biocomposites

    Article • Fibers and Polymers, February 2023, Springer Science + Business Media

    Dr. R.A. Ilyas

  55. Mechanical Properties of Hybrid Lignocellulosic Fiber-Reinforced Biopolymer Green Composites: A Review

    Article • Fibers and Polymers, February 2023, Springer Science + Business Media

    Dr. R.A. Ilyas

  56. Morphology and selected properties of kenaf fiber/cornhusk reinforced corn starch hybrid biocomposites

    Article • Polimery, January 2023, Industrial Chemistry Research Institute

    Dr. R.A. Ilyas, Dr NOOR IZZRI ABDUL WAHAB

  57. Effect of Wood Dust Fibre Treatments Reinforcement on the Properties of Recycled Polypropylene Composite (r-WoPPC) Filament for Fused Deposition Modelling (FDM)

    Article • Materials, January 2023, MDPI AG

    Dr. R.A. Ilyas

  58. Hybrid nanofiller reinforcement in thermoset and biothermoset applications: A review

    Article • Nanotechnology Reviews, January 2023, De Gruyter

    Dr. R.A. Ilyas

  59. Influence of ultrasonication time on the various properties of alkaline-treated mango seed waste filler reinforced PVA biocomposite

    Article • REVIEWS ON ADVANCED MATERIALS SCIENCE, January 2023, De Gruyter

    Dr. R.A. Ilyas

  60. Residual mechanical properties of concrete incorporated with nano supplementary cementitious materials exposed to elevated temperature

    Article • Nanotechnology Reviews, January 2023, De Gruyter

    Dr. R.A. Ilyas

  61. Effect of Various Plasticizers in Different Concentrations on Physical, Thermal, Mechanical, and Structural Properties of Wheat Starch-Based Films

    Article • Polymers, December 2022, MDPI AG

    Dr. R.A. Ilyas

  62. Effect of Agar on the Mechanical, Thermal, and Moisture Absorption Properties of Thermoplastic Sago Starch Composites

    Article • Materials, December 2022, MDPI AG

    Dr. R.A. Ilyas

  63. Mechanical properties of cellulose‐based multiscale composites: A review

    Article • Polymer Composites, November 2022, Wiley

    Dr. R.A. Ilyas, Dr Mohammad Jawaid

  64. Effect of Chemical Treatment of Sugar Palm Fibre on Rheological and Thermal Properties of the PLA Composites Filament for FDM 3D Printing

    Article • Materials, November 2022, MDPI AG

    Dr. R.A. Ilyas

  65. Nonlinear Control of Fouling in Polyethylene Reactors

    Article • ACS Omega, October 2022, American Chemical Society (ACS)

    Dr. R.A. Ilyas

  66. The Frontiers of Functionalized Nanocellulose-Based Composites and Their Application as Chemical Sensors

    Article • Polymers, October 2022, MDPI AG

    Dr. R.A. Ilyas, Syukri Misenan

  67. Corn: Its Structure, Polymer, Fiber, Composite, Properties, and Applications

    Article • Polymers, October 2022, MDPI AG

    Dr. R.A. Ilyas

  68. White Ginger Nanocellulose as Effective Reinforcement and Antimicrobial Polyvinyl Alcohol/ZnO Hybrid Biocomposite Films Additive for Food Packaging Applications

    Article • Journal of Composites Science, October 2022, MDPI AG

    Dr. R.A. Ilyas

  69. Recent Developments in Cassava (Manihot esculenta) Based Biocomposites and Their Potential Industrial Applications: A Comprehensive Review

    Article • Materials, October 2022, MDPI AG

    Dr. R.A. Ilyas

  70. The Current State-Of-Art of Copper Removal from Wastewater: A Review

    Article • Water, October 2022, MDPI AG

    Dr. R.A. Ilyas

  71. Preparation and Characterization of Black Seed/Cassava Bagasse Fiber-Reinforced Cornstarch-Based Hybrid Composites

    Article • Sustainability, September 2022, MDPI AG

    Dr. R.A. Ilyas

  72. Bio and Synthetic Based Polymer Composite Materials

    Article • Polymers, September 2022, MDPI AG

    Dr. R.A. Ilyas

  73. Fibre-Reinforced Polymer Composites: Mechanical Properties and Applications

    Article • Polymers, September 2022, MDPI AG

    Dr. R.A. Ilyas

  74. Fiber-Reinforced Polymer Nanocomposites

    Article • Nanomaterials, September 2022, MDPI AG

    Dr. R.A. Ilyas

  75. A review of nanocellulose adsorptive membrane as multifunctional wastewater treatment

    Article • Carbohydrate Polymers, September 2022, Elsevier

    Dr. R.A. Ilyas

  76. Surface modifications of cellulose nanocrystals: Processes, properties, and applications

    Article • Food Hydrocolloids, September 2022, Elsevier

    Dr. R.A. Ilyas

  77. A comprehensive review on applications of 3D printing in natural fibers polymer composites for biomedical applications

    Article • Functional Composites and Structures, August 2022, Institute of Physics Publishing

    Dr. R.A. Ilyas

  78. Rice Husk as a Pore-Forming Agent: Impact of Particle Size on the Porosity and Diametral Tensile Strength of Porous Alumina Ceramics

    Article • Coatings, August 2022, MDPI AG

    Dr. R.A. Ilyas

  79. Current Progress in Biopolymer-Based Bionanocomposites and Hybrid Materials

    Article • Polymers, August 2022, MDPI AG

    Dr. R.A. Ilyas

  80. Mechanical, absorption, and swelling properties of jute/kenaf/banana reinforced epoxy hybrid composites: Influence of various stacking sequences

    Article • Polymer Composites, August 2022, Wiley

    Dr. R.A. Ilyas

  81. Colocasia esculenta stems for the isolation of cellulose nanofibers: a chlorine-free method for the biomass conversion

    Article • Biomass Conversion and Biorefinery, August 2022, Springer Science + Business Media

    Dr. R.A. Ilyas

  82. Crystallinity, Chemical, Thermal, and Dynamic Mechanical Properties of Rice Husk/Coco Peat Fiber Reinforced ABS Biocomposites

    Article • Journal of Natural Fibers, August 2022, Taylor & Francis

    Dr. R.A. Ilyas

  83. Experimental Investigation and Performance Optimization during Machining of Hastelloy C-276 Using Green Lubricants

    Article • Materials, August 2022, MDPI AG

    Dr. R.A. Ilyas

  84. Additive Manufacturing of Polymer–Fiber Composites

    Article • Materials, August 2022, MDPI AG

    Dr. R.A. Ilyas

  85. Gasification Characteristics and Kinetics of Lipid-Extracted Nannochloropsis gaditana

    Article • Processes, August 2022, MDPI AG

    Dr. R.A. Ilyas

  86. Effect of sugarcane bagasse on thermal and mechanical properties of thermoplastic cassava starch/beeswax composites

    Article • Physical Sciences Reviews, August 2022, De Gruyter

    Dr. R.A. Ilyas

  87. Investigation of Tensile Properties of Different Infill Pattern Structures of 3D-Printed PLA Polymers: Analysis and Validation Using Finite Element Analysis in ANSYS

    Article • Materials, July 2022, MDPI AG

    Dr. R.A. Ilyas, Dr. RAJKUMAR SIVANRAJU

  88. Investigation of copper reinforced Acrylonitrile Butadiene Styrene and Nylon 6 based thermoplastic polymer nanocomposite filaments for 3D printing of electronic components

    Article • High Performance Polymers, July 2022, SAGE Publications

    Dr. R.A. Ilyas

  89. Influence of Alkali Treatment on the Mechanical, Thermal, Water Absorption, and Biodegradation Properties of Cymbopogan citratus Fiber-Reinforced, Thermoplastic Cassava Starch–Palm Wax Composites

    Article • Polymers, July 2022, MDPI AG

    Dr. R.A. Ilyas

  90. Effect of surface treatment and fiber loading on the physical, mechanical, sliding wear, and morphological characteristics of tasar silk fiber waste-epoxy composites for multifaceted biomedical and engineering applications: fabrication and characteriza...

    Article • Journal of Materials Research and Technology, July 2022, Elsevier

    Dr. R.A. Ilyas

  91. Thermal, flammability, and antimicrobial properties of arrowroot (Maranta arundinacea) fiber reinforced arrowroot starch biopolymer composites for food packaging applications

    Article • International Journal of Biological Macromolecules, July 2022, Elsevier

    Dr. R.A. Ilyas

  92. Thermal Stability, Dynamic Mechanical Analysis and Flammability Properties of Woven Kenaf/Polyester-Reinforced Polylactic Acid Hybrid Laminated Composites

    Article • Polymers, June 2022, MDPI AG

    Dr. R.A. Ilyas

  93. Critical Review on Polylactic Acid: Properties, Structure, Processing, Biocomposites, and Nanocomposites

    Article • Materials, June 2022, MDPI AG

    Dr. R.A. Ilyas

  94. Natural Fiber-Reinforced Thermoplastic ENR/PVC Composites as Potential Membrane Technology in Industrial Wastewater Treatment: A Review

    Article • Polymers, June 2022, MDPI AG

    Dr. R.A. Ilyas

  95. Development of Natural Fibre-Reinforced Polymer Composites Ballistic Helmet Using Concurrent Engineering Approach: A Brief Review

    Article • Sustainability, June 2022, MDPI AG

    Dr. R.A. Ilyas

  96. Morphological, Physical, and Mechanical Properties of Sugar-Palm (Arenga pinnata (Wurmb) Merr.)-Reinforced Silicone Rubber Biocomposites

    Article • Materials, June 2022, MDPI AG

    Dr. R.A. Ilyas

  97. Hyperelastic Properties of Bamboo Cellulosic Fibre–Reinforced Silicone Rubber Biocomposites via Compression Test

    Article • International Journal of Molecular Sciences, June 2022, MDPI AG

    Dr. R.A. Ilyas

  98. Sugar Palm Fibre-Reinforced Polymer Composites: Influence of Chemical Treatments on Its Mechanical Properties

    Article • Materials, May 2022, MDPI AG

    Dr. R.A. Ilyas

  99. Mechanical, microstructural, and dynamic mechanical properties of electrospun short nanofiber reinforced epoxy composites

    Article • Polymer Composites, May 2022, Wiley

    Dr. R.A. Ilyas

  100. Effects of Elevated Temperature on the Residual Behavior of Concrete Containing Marble Dust and Foundry Sand

    Article • Materials, May 2022, MDPI AG

    Dr. R.A. Ilyas

  101. Extraction, Characterization, and Comparison of Properties of Cassava Bagasse and Black Seed Fibers

    Article • Journal of Natural Fibers, May 2022, Taylor & Francis

    Dr. R.A. Ilyas

  102. Effect of hybridization on physio-mechanical behavior of Vetiver and Jute fibers reinforced epoxy composites for structural applications: Studies on fabrication, physicomechanical, water-absorption, and morphological properties

    Article • Journal of Industrial Textiles, May 2022, SAGE Publications

    Dr. R.A. Ilyas

  103. Recent developments in RAM based MWCNT composite materials: a short review

    Article • Functional Composites and Structures, May 2022, Institute of Physics Publishing

    Dr. R.A. Ilyas

  104. Dynamic mechanical properties of natural fiber reinforced hybrid polymer composites: A review

    Article • Journal of Materials Research and Technology, May 2022, Elsevier

    Dr. R.A. Ilyas

  105. Effect of Kenaf Fibre as Reinforcing Fillers in Corn Starch-Based Biocomposite Film

    Article • Polymers, April 2022, MDPI AG

    Dr. R.A. Ilyas, Dr NOOR IZZRI ABDUL WAHAB

  106. Emerging Developments on Nanocellulose as Liquid Crystals: A Biomimetic Approach

    Article • Polymers, April 2022, MDPI AG

    Dr. R.A. Ilyas, Syukri Misenan

  107. Preference Index of Sustainable Natural Fibers in Stone Matrix Asphalt Mixture Using Waste Marble

    Article • Materials, April 2022, MDPI AG

    Dr. R.A. Ilyas

  108. Potential of Flax Fiber Reinforced Biopolymer Composites for Cross-Arm Application in Transmission Tower: A Review

    Article • Fibers and Polymers, April 2022, Springer Science + Business Media

    Dr. R.A. Ilyas

  109. Bamboo-Fiber-Reinforced Thermoset and Thermoplastic Polymer Composites: A Review of Properties, Fabrication, and Potential Applications

    Article • Polymers, March 2022, MDPI AG

    Dr. R.A. Ilyas

  110. Impact of Process Variables of Acetone Vapor Jet Drilling on Surface Roughness and Circularity of 3D-Printed ABS Parts: Fabrication and Studies on Thermal, Morphological, and Chemical Characterizations

    Article • Polymers, March 2022, MDPI AG

    Dr. R.A. Ilyas

  111. Comparative Drug Release Investigations for Diclofenac Sodium Drug (DS) by Chitosan-Based Grafted and Crosslinked Copolymers

    Article • Materials, March 2022, MDPI AG

    Dr. R.A. Ilyas

  112. Abrasive water jet machining of coir fiber reinforced epoxy composites: a review

    Article • Functional Composites and Structures, March 2022, Institute of Physics Publishing

    Dr. R.A. Ilyas

  113. Isolation and characterization of cellulose nanofibers from Agave gigantea by chemical-mechanical treatment

    Article • International Journal of Biological Macromolecules, March 2022, Elsevier

    Dr. R.A. Ilyas

  114. Mechanical performance evaluation of bamboo fibre reinforced polymer composites and its applications: a review

    Article • Functional Composites and Structures, March 2022, Institute of Physics Publishing

    Dr. R.A. Ilyas

  115. Mechanical properties of oil palm fibre-reinforced polymer composites: a review

    Article • Journal of Materials Research and Technology, March 2022, Elsevier

    Dr. R.A. Ilyas

  116. Product Development of Natural Fibre-Composites for Various Applications: Design for Sustainability

    Article • Polymers, February 2022, MDPI AG

    Dr. R.A. Ilyas

  117. Natural-Fiber-Reinforced Chitosan, Chitosan Blends and Their Nanocomposites for Various Advanced Applications

    Article • Polymers, February 2022, MDPI AG

    Dr. R.A. Ilyas

  118. Filament-wound glass-fibre reinforced polymer composites: Potential applications for cross arm structure in transmission towers

    Article • Polymer Bulletin, February 2022, Springer Science + Business Media

    Dr. R.A. Ilyas

  119. Biocomposite of Cassava Starch-Cymbopogan Citratus Fibre: Mechanical, Thermal and Biodegradation Properties

    Article • Polymers, January 2022, MDPI AG

    Dr. R.A. Ilyas

  120. Physical, Mechanical, and Morphological Performances of Arrowroot (Maranta arundinacea) Fiber Reinforced Arrowroot Starch Biopolymer Composites

    Article • Polymers, January 2022, MDPI AG

    Dr. R.A. Ilyas

  121. Natural Fiber-Reinforced Polylactic Acid, Polylactic Acid Blends and Their Composites for Advanced Applications

    Article • Polymers, January 2022, MDPI AG

    Dr. R.A. Ilyas, Dr Yasir Nawab

  122. 3D Printing and Shaping Polymers, Composites, and Nanocomposites: A Review

    Article • Polymers, January 2022, MDPI AG

    Dr. R.A. Ilyas

  123. Natural Fiber-Reinforced Polycaprolactone Green and Hybrid Biocomposites for Various Advanced Applications

    Article • Polymers, January 2022, MDPI AG

    Dr. R.A. Ilyas, Syukri Misenan

  124. Application of artificial neural network to predict water flux from pre-treated palm oil mill effluent using direct contact membrane distillation

    Article • Materials Today Proceedings, January 2022, Elsevier

    Dr. R.A. Ilyas, Dr Zainal Ahmad

  125. Effect of palm wax on the mechanical, thermal, and moisture absorption properties of thermoplastic cassava starch composites

    Article • International Journal of Biological Macromolecules, January 2022, Elsevier

    Dr. R.A. Ilyas

  126. Effect of plasticizers on the properties of sugar palm nanocellulose/cinnamon essential oil reinforced starch bionanocomposite films

    Article • Nanotechnology Reviews, January 2022, De Gruyter

    Dr. R.A. Ilyas

  127. Effects of Planting Density of Rubber Tree Clone (RRIM 2020 Clone and RRIM 2025 Clone) Wood to Particleboard Properties

    Article • JOURNAL OF RENEWABLE MATERIALS, January 2022, Computers, Materials and Continua (Tech Science Press)

    Dr. R.A. Ilyas

  128. Oxygen permeability properties of nanocellulose reinforced biopolymer nanocomposites

    Article • Materials Today Proceedings, January 2022, Elsevier

    Dr. R.A. Ilyas

  129. Polyethyleneimine-impregnated activated carbon nanofiber composited graphene-derived rice husk char for efficient post-combustion CO2 capture

    Article • Nanotechnology Reviews, January 2022, De Gruyter

    Dr. R.A. Ilyas

  130. Pyrolysis of polypropylene plastic waste into carbonaceous char: Priority of plastic waste management amidst COVID-19 pandemic

    Article • The Science of The Total Environment, January 2022, Elsevier

    Dr. R.A. Ilyas

  131. Recovery of Cr from chrome-containing leather wastes to develop aluminum-based composite material along with Al2O3 ceramic particles: An ingenious approach

    Article • Nanotechnology Reviews, January 2022, De Gruyter

    Dr. R.A. Ilyas

  132. Compression Behaviour of Bio-Inspired Honeycomb Reinforced Starfish Shape Structures Using 3D Printing Technology

    Article • Polymers, December 2021, MDPI AG

    Dr. R.A. Ilyas

  133. Flammability and physical stability of sugar palm crystalline nanocellulose reinforced thermoplastic sugar palm starch/poly(lactic acid) blend bionanocomposites

    Article • Nanotechnology Reviews, December 2021, De Gruyter

    Dr. R.A. Ilyas

  134. Mechanical, morphological, and fracture-deformation behavior of MWCNTs-reinforced (Al–Cu–Mg–T351) alloy cast nanocomposites fabricated by optimized mechanical milling and powder metallurgy techniques

    Article • Nanotechnology Reviews, December 2021, De Gruyter

    Dr. R.A. Ilyas

  135. Study of mode II interlaminar fracture toughness of laminated composites of glass and jute fibres in epoxy for structural applications

    Article • Functional Composites and Structures, December 2021, Institute of Physics Publishing

    Dr. R.A. Ilyas

  136. Effect of silane treatments on mechanical performance of kenaf fibre reinforced polymer composites: a review

    Article • Functional Composites and Structures, December 2021, Institute of Physics Publishing

    Dr. R.A. Ilyas

  137. Recent advances of thermal properties of sugar palm lignocellulosic fibre reinforced polymer composites

    Article • International Journal of Biological Macromolecules, December 2021, Elsevier

    Dr. R.A. Ilyas

  138. Unraveling the efficacy of different treatments towards suppressing limonin and naringin content of Kinnow juice: An innovative report

    Article • LWT, December 2021, Elsevier

    Dr. R.A. Ilyas

  139. Hybridization of MMT/Lignocellulosic Fiber Reinforced Polymer Nanocomposites for Structural Applications: A Review

    Article • Coatings, November 2021, MDPI AG

    Dr. R.A. Ilyas

  140. Wheat Biocomposite Extraction, Structure, Properties and Characterization: A Review

    Article • Polymers, October 2021, MDPI AG

    Dr. R.A. Ilyas

  141. Comparative Analysis of Erosive Wear Behaviour of Epoxy, Polyester and Vinyl Esters Based Thermosetting Polymer Composites for Human Prosthetic Applications Using Taguchi Design

    Article • Polymers, October 2021, MDPI AG

    Dr. R.A. Ilyas

  142. Quasi-Static Compression Properties of Bamboo and PVC Tube Reinforced Polymer Foam Structures

    Article • Polymers, October 2021, MDPI AG

    Dr. R.A. Ilyas, Dr Suhad D. Salman

  143. Critical Review of Natural Fiber Reinforced Hybrid Composites: Processing, Properties, Applications and Cost

    Article • Polymers, October 2021, MDPI AG

    Dr. R.A. Ilyas

  144. Development and Characterization of Cornstarch-Based Bioplastics Packaging Film Using a Combination of Different Plasticizers

    Article • Polymers, October 2021, MDPI AG

    Dr. R.A. Ilyas

  145. Characterization of natural cellulosic fiber isolated from Malaysian Cymbopogan citratus leaves

    Article • BioResources, October 2021, BioResources

    Dr. R.A. Ilyas

  146. Use of Industrial Wastes as Sustainable Nutrient Sources for Bacterial Cellulose (BC) Production: Mechanism, Advances, and Future Perspectives

    Article • Polymers, September 2021, MDPI AG

    Dr. R.A. Ilyas

  147. Dynamic Mechanical Properties and Thermal Properties of Longitudinal Basalt/Woven Glass Fiber Reinforced Unsaturated Polyester Hybrid Composites

    Article • Polymers, September 2021, MDPI AG

    Dr. R.A. Ilyas

  148. Effect of Chemically Treated Kenaf Fibre on Mechanical and Thermal Properties of PLA Composites Prepared through Fused Deposition Modeling (FDM)

    Article • Polymers, September 2021, MDPI AG

    Dr. R.A. Ilyas

  149. Assessment of Dimensional Stability, Biodegradability, and Fracture Energy of Bio-Composites Reinforced with Novel Pine Cone

    Article • Polymers, September 2021, MDPI AG

    Dr. R.A. Ilyas

  150. Characteristics and Properties of Lemongrass (Cymbopogan Citratus): A Comprehensive Review

    Article • Journal of Natural Fibers, September 2021, Taylor & Francis

    Dr. R.A. Ilyas

  151. Effect of benzoyl treatment on the performance of sugar palm/kenaf fiber-reinforced polypropylene hybrid composites

    Article • Textile Research Journal, September 2021, SAGE Publications

    Dr. R.A. Ilyas

  152. Greener Pretreatment Approaches for the Valorisation of Natural Fibre Biomass into Bioproducts

    Article • Polymers, August 2021, MDPI AG

    Dr. R.A. Ilyas

  153. Recent Trends and Developments in Conducting Polymer Nanocomposites for Multifunctional Applications

    Article • Polymers, August 2021, MDPI AG

    Dr. R.A. Ilyas

  154. Mechanical Performance and Applications of CNTs Reinforced Polymer Composites—A Review

    Article • Nanomaterials, August 2021, MDPI AG

    Dr. R.A. Ilyas

  155. Effect of Nanofillers on Tribological Properties of Polymer Nanocomposites: A Review on Recent Development

    Article • Polymers, August 2021, MDPI AG

    Dr. R.A. Ilyas

  156. Effect of alkaline and benzoyl chloride treatments on the mechanical and morphological properties of sugar palm fiber-reinforced poly(lactic acid) composites

    Article • Textile Research Journal, August 2021, SAGE Publications

    Dr. R.A. Ilyas, Dr Suhad D. Salman

  157. Development and Characterization of Fenugreek Protein-Based Edible Film

    Article • Foods, August 2021, MDPI AG

    Dr. R.A. Ilyas

  158. Natural fibre filament for Fused Deposition Modelling (FDM): a review

    Article • International Journal of Sustainable Engineering, August 2021, Taylor & Francis

    Dr. R.A. Ilyas

  159. Thermogravimetric Analysis Properties of Cellulosic Natural Fiber Polymer Composites: A Review on Influence of Chemical Treatments

    Article • Polymers, August 2021, MDPI AG

    Dr. R.A. Ilyas

  160. Critical Review of Biodegradable and Bioactive Polymer Composites for Bone Tissue Engineering and Drug Delivery Applications

    Article • Polymers, August 2021, MDPI AG

    Dr. R.A. Ilyas

  161. Reflections on Local Community Identity by Evaluating Heritage Sustainability Protection in Jugra, Selangor, Malaysia

    Article • Sustainability, August 2021, MDPI AG

    Dr. R.A. Ilyas

  162. Crashworthiness Response of Filament Wound Kenaf/Glass Fibre-reinforced Epoxy Composite Tubes with Influence of Stacking Sequence under Intermediate-velocity Impact Load

    Article • Fibers and Polymers, July 2021, Springer Science + Business Media

    Dr. R.A. Ilyas, Dr Mohammad Jawaid

  163. Unraveling the Bioactive Profile, Antioxidant and DNA Damage Protection Potential of Rye (Secale cereale) Flour

    Article • Antioxidants, July 2021, MDPI AG

    Dr. R.A. Ilyas

  164. Development and Characterization of Physical Modified Pearl Millet Starch-Based Films

    Article • Foods, July 2021, MDPI AG

    Dr. R.A. Ilyas

  165. Characterization of the density and mechanical properties of corn husk fiber reinforced polyester composites after exposure to ultraviolet light

    Article • Functional Composites and Structures, July 2021, Institute of Physics Publishing

    Dr. R.A. Ilyas

  166. Recent developments in sustainable arrowroot (Maranta arundinacea Linn) starch biopolymers, fibres, biopolymer composites and their potential industrial applications: A review

    Article • Journal of Materials Research and Technology, July 2021, Elsevier

    Dr. R.A. Ilyas

  167. A Review on Mechanical Performance of Hybrid Natural Fiber Polymer Composites for Structural Applications

    Article • Polymers, June 2021, MDPI AG

    Dr. R.A. Ilyas

  168. Optimization of FFF Process Parameters by Naked Mole-Rat Algorithms with Enhanced Exploration and Exploitation Capabilities

    Article • Polymers, May 2021, MDPI AG

    Dr. R.A. Ilyas

  169. Polymer Composites Filled with Metal Derivatives: A Review of Flame Retardants

    Article • Polymers, May 2021, MDPI AG

    Dr. R.A. Ilyas

  170. Kenaf Fiber/Pet Yarn Reinforced Epoxy Hybrid Polymer Composites: Morphological, Tensile, and Flammability Properties

    Article • Polymers, May 2021, MDPI AG

    Dr. R.A. Ilyas

  171. Flammability, morphological and mechanical properties of sugar palm fiber/polyester yarn-reinforced epoxy hybrid biocomposites with magnesium hydroxide flame retardant filler

    Article • Textile Research Journal, May 2021, SAGE Publications

    Dr. R.A. Ilyas

  172. Treatments of Natural Fibre as Reinforcement in Polymer Composites-Short Review

    Article • Functional Composites and Structures, May 2021, Institute of Physics Publishing

    Dr. R.A. Ilyas

  173. Effects of the liquid natural rubber (LNR) on mechanical properties and microstructure of epoxy/silica/kenaf hybrid composite for potential automotive applications

    Article • Journal of Materials Research and Technology, May 2021, Elsevier

    Dr. R.A. Ilyas

  174. Bio‐based Packaging

    Article • April 2021, Wiley

    Dr. R.A. Ilyas

  175. Environmental Advantages and Challenges of Bio‐Based Packaging Materials

    Article • April 2021, Wiley

    Dr. R.A. Ilyas

  176. Life Cycle Assessment of Bio‐Based Packaging Products

    Article • April 2021, Wiley

    Dr. R.A. Ilyas

  177. Manufacturing of Biobased Packaging Materials

    Article • April 2021, Wiley

    Dr. R.A. Ilyas

  178. Nanocellulose Composite Films for Packaging Applications

    Article • April 2021, Wiley

    Dr. R.A. Ilyas

  179. Nanocellulose Reinforced Polypropylene and Polyethylene Composite for Packaging Application

    Article • April 2021, Wiley

    Dr. R.A. Ilyas

  180. Polyhydroxyalkanoates for Packaging Application

    Article • April 2021, Wiley

    Dr. R.A. Ilyas

  181. Properties and Food Packaging Application of Poly‐(Lactic) Acid

    Article • April 2021, Wiley

    Dr. R.A. Ilyas

  182. Regulations for Food Packaging Materials

    Article • April 2021, Wiley

    Dr. R.A. Ilyas

  183. Renewable Sources for Packaging Materials

    Article • April 2021, Wiley

    Dr. R.A. Ilyas

  184. Reuse and Recycle of Biobased Packaging Products

    Article • April 2021, Wiley

    Dr. R.A. Ilyas

  185. Socioeconomic Impact of Bio‐Based Packaging Bags

    Article • April 2021, Wiley

    Dr. R.A. Ilyas

  186. Sustainable Paper‐Based Packaging

    Article • April 2021, Wiley

    Dr. R.A. Ilyas

  187. Utilization of Rice Straw as a Raw Material for Food Packaging

    Article • April 2021, Wiley

    Dr. R.A. Ilyas

  188. Processing and Characterisation of Banana Leaf Fibre Reinforced Thermoplastic Cassava Starch Composites

    Article • Polymers, April 2021, MDPI AG

    Dr. R.A. Ilyas

  189. Physical Properties of Thermoplastic Starch Derived from Natural Resources and Its Blends: A Review

    Article • Polymers, April 2021, MDPI AG

    Dr. R.A. Ilyas

  190. Delamination and Manufacturing Defects in Natural Fiber-Reinforced Hybrid Composite: A Review

    Article • Polymers, April 2021, MDPI AG

    Dr. R.A. Ilyas

  191. Polylactic Acid (PLA) Biocomposite: Processing, Additive Manufacturing and Advanced Applications

    Article • Polymers, April 2021, MDPI AG

    Dr. R.A. Ilyas

  192. Critical Determinants of Household Electricity Consumption in a Rapidly Growing City

    Article • Sustainability, April 2021, MDPI AG

    Dr. R.A. Ilyas

  193. Flammability, Tensile, and Morphological Properties of Oil Palm Empty Fruit Bunches Fiber/Pet Yarn-Reinforced Epoxy Fire Retardant Hybrid Polymer Composites

    Article • Polymers, April 2021, MDPI AG

    Dr. R.A. Ilyas

  194. Antimicrobial Edible Film Prepared from Bacterial Cellulose Nanofibers/Starch/Chitosan for a Food Packaging Alternative

    Article • International Journal of Polymer Science, March 2021, Hindawi Publishing Corporation

    Dr. R.A. Ilyas

  195. Fabrication, Functionalization, and Application of Carbon Nanotube-Reinforced Polymer Composite: An Overview

    Article • Polymers, March 2021, MDPI AG

    Dr. R.A. Ilyas

  196. Characterization of compressed bacterial cellulose nanopaper film after exposure to dry and humid conditions

    Article • Journal of Materials Research and Technology, March 2021, Elsevier

    Dr. R.A. Ilyas

  197. Effect of alkali treatment of piper betle fiber on tensile properties as biocomposite based polylactic acid: Solvent cast-film method

    Article • Materials Today Proceedings, March 2021, Elsevier

    Dr. R.A. Ilyas

  198. A Review on Natural Fiber Reinforced Polymer Composite for Bullet Proof and Ballistic Applications

    Article • Polymers, February 2021, MDPI AG

    Dr. R.A. Ilyas

  199. A Comprehensive Review on Advanced Sustainable Woven Natural Fibre Polymer Composites

    Article • Polymers, February 2021, MDPI AG

    Dr. R.A. Ilyas

  200. Potential of Natural Fiber Reinforced Polymer Composites in Sandwich Structures: A Review on Its Mechanical Properties

    Article • Polymers, January 2021, MDPI AG

    Dr. R.A. Ilyas

  201. Effect of fiber content and their hybridization on bending and torsional strength of hybrid epoxy composites reinforced with carbon and sugar palm fibers

    Article • Polimery, January 2021, Industrial Chemistry Research Institute

    Dr. R.A. Ilyas

  202. Micro- and Nanocellulose in Polymer Composite Materials: A Review

    Article • Polymers, January 2021, MDPI AG

    Dr. R.A. Ilyas

  203. Water barrier and mechanical properties of sugar palm crystalline nanocellulose reinforced thermoplastic sugar palm starch (TPS)/poly(lactic acid) (PLA) blend bionanocomposites

    Article • Nanotechnology Reviews, January 2021, De Gruyter

    Dr. R.A. Ilyas

  204. Implementation of design for sustainability in developing trophy plaque using green kenaf polymer composites

    Article • January 2021, Elsevier

    Dr. R.A. Ilyas

  205. A comprehensive review of natural fiber reinforced polymer biocomposites and their applications

    Article • January 2021, Elsevier

    Dr. R.A. Ilyas

  206. Emerging development of nanocellulose as an antimicrobial material: an overview

    Article • Materials Advances, January 2021, Royal Society of Chemistry

    Dr. R.A. Ilyas

  207. Recent development in kenaf (Hibiscus cannabinus)-based biocomposites and their potential industrial applications: A review

    Article • January 2021, Elsevier

    Dr. R.A. Ilyas

  208. Application of polymer composite materials in motorcycles: A comprehensive review

    Article • January 2021, Elsevier

    Dr. R.A. Ilyas

  209. Application of biocomposites in automotive components: A review

    Article • January 2021, Elsevier

    Dr. R.A. Ilyas

  210. Macro to nanoscale natural fiber composites for automotive components: Research, development, and application

    Article • January 2021, Elsevier

    Dr. R.A. Ilyas

  211. Performance evaluation of cellulose nanofiber reinforced polypropylene biocomposites for automotive applications

    Article • January 2021, Elsevier

    Dr. R.A. Ilyas

  212. Thermal properties of sugar palm yarn reinforced unsaturated polyester composites as an alternative for automotive applications

    Article • January 2021, Elsevier

    Dr. R.A. Ilyas

  213. Unidirectional oil palm empty fruit bunch (OPEFB) fiber reinforced epoxy composite car bumper beam—Effects of different fiber orientations on its crash performance

    Article • January 2021, Elsevier

    Dr. R.A. Ilyas

  214. Characteristic of composite bioplastics from tapioca starch and sugarcane bagasse fiber: Effect of time duration of ultrasonication (Bath-Type)

    Article • Materials Today Proceedings, January 2021, Elsevier

    Dr. R.A. Ilyas

  215. The Effects of Unbleached and Bleached Nanocellulose on the Thermal and Flammability of Polypropylene-Reinforced Kenaf Core Hybrid Polymer Bionanocomposites

    Article • Polymers, December 2020, MDPI AG

    Dr. R.A. Ilyas

  216. Potential Application of Green Composites for Cross Arm Component in Transmission Tower: A Brief Review

    Article • International Journal of Polymer Science, December 2020, Hindawi Publishing Corporation

    Dr. R.A. Ilyas

  217. The Effects of Silver Nanoparticles Compositions on the Mechanical, Physiochemical, Antibacterial, and Morphology Properties of Sugar Palm Starch Biocomposites for Antibacterial Coating

    Article • Polymers, November 2020, MDPI AG

    Dr. R.A. Ilyas

  218. The effect of water immersion and fibre content on properties of corn husk fibres reinforced thermoset polyester composite

    Article • Polymer Testing, November 2020, Elsevier

    Dr. R.A. Ilyas

  219. Characterization, Thermal and Antimicrobial Properties of Hybrid Cellulose Nanocomposite Films with in-Situ Generated Copper Nanoparticles in Tamarindus indica Nut Powder

    Article • Journal of Polymers and the Environment, October 2020, Springer Science + Business Media

    Dr. R.A. Ilyas

  220. Biofiller-Reinforced Biodegradable Polymer Composites

    Article • October 2020, Taylor & Francis

    Dr. R.A. Ilyas

  221. Characterization of Corn Fiber-Filled Cornstarch Biopolymer Composites

    Article • October 2020, Taylor & Francis

    Dr. R.A. Ilyas

  222. Extraction and Characterization of Malaysian Cassava Starch, Peel, and Bagasse, and Selected Properties of the Composites

    Article • October 2020, Taylor & Francis

    Dr. R.A. Ilyas

  223. Tensile Properties of Sugar Palm Fiber-Reinforced Polymer Composites

    Article • October 2020, Taylor & Francis

    Dr. R.A. Ilyas

  224. Antimicrobial Studies on Food Packaging Materials

    Article • October 2020, Taylor & Francis

    Dr. R.A. Ilyas

  225. Antimicrobial Activities of Starch-Based Biopolymers and Biocomposites Incorporated with Plant Essential Oils: A Review

    Article • Polymers, October 2020, MDPI AG

    Dr. R.A. Ilyas

  226. Mechanical Properties of Longitudinal Basalt/Woven-Glass-Fiber-reinforced Unsaturated Polyester-Resin Hybrid Composites

    Article • Polymers, September 2020, MDPI AG

    Dr. R.A. Ilyas

  227. A Review of Biocomposites in Biomedical Application

    Article • September 2020, Taylor & Francis

    Dr. R.A. Ilyas

  228. A Review on Nanocellulose Composites in Biomedical Application

    Article • September 2020, Taylor & Francis

    Dr. R.A. Ilyas

  229. Composites in Biomedical Applications

    Article • September 2020, Taylor & Francis

    Dr. R.A. Ilyas

  230. Conceptual Design of Composite Crutches

    Article • September 2020, Taylor & Francis

    Dr. R.A. Ilyas

  231. Conceptual Design of Kenaf Fiber Reinforced Polymer Composite Chair with Input from Anthropometric Data

    Article • September 2020, Taylor & Francis

    Dr. R.A. Ilyas

  232. Medical Rubber Glove Waste As Potential Filler Materials in Polymer Composites

    Article • September 2020, Taylor & Francis

    Dr. R.A. Ilyas

  233. The Hip Joint and Total Hip Replacement

    Article • September 2020, Taylor & Francis

    Dr. R.A. Ilyas

  234. Characterization Study of Empty Fruit Bunch (EFB) Fibers Reinforcement in Poly(Butylene) Succinate (PBS)/Starch/Glycerol Composite Sheet

    Article • Polymers, July 2020, MDPI AG

    Dr. R.A. Ilyas

  235. Biopolymers and Biocomposites: Chemistry and Technology

    Article • Current Analytical Chemistry, July 2020, Bentham Science Publishers

    Professor S.M. Sapuan, Dr. R.A. Ilyas

  236. Microstructure evolution and hardness of MWCNT-reinforced Sn-5Sb/Cu composite solder joints under different thermal aging conditions

    Article • Microelectronics Reliability, July 2020, Elsevier

    Dr. R.A. Ilyas

  237. Effect of hydrolysis time on the morphological, physical, chemical, and thermal behavior of sugar palm nanocrystalline cellulose (Arenga pinnata (Wurmb.) Merr)

    Article • Textile Research Journal, June 2020, SAGE Publications

    Dr. R.A. Ilyas

  238. Creep test rig for cantilever beam: Fundamentals, prospects and present views

    Article • JOURNAL OF MECHANICAL ENGINEERING AND SCIENCES, June 2020, Universiti Malaysia Pahang Publisher

    Dr. R.A. Ilyas

  239. Improvement of Biocomposite Properties Based Tapioca Starch and Sugarcane Bagasse Cellulose Nanofibers

    Article • Key Engineering Materials, June 2020, Trans Tech Publications

    Dr. R.A. Ilyas

  240. Electrical properties of sugar palm nanocrystalline cellulose, reinforced sugar palm starch nanocomposites

    Article • Polimery, May 2020, Industrial Chemistry Research Institute

    Dr. R.A. Ilyas

  241. Evaluation of Design and Simulation of Creep Test Rig for Full-Scale Crossarm Structure

    Article • Advances in Civil Engineering, April 2020, Hindawi Publishing Corporation

    Dr. R.A. Ilyas

  242. Integration of TRIZ , morphological chart and ANP method for development of FRP composite portable fire extinguisher

    Article • Polymer Composites, April 2020, Wiley

    Dr. R.A. Ilyas

  243. Nanocellulose Reinforced Thermoplastic Starch (TPS), Polylactic Acid (PLA), and Polybutylene Succinate (PBS) for Food Packaging Applications

    Article • Frontiers in Chemistry, April 2020, Frontiers

    Dr. R.A. Ilyas

  244. Thermal, Biodegradability and Water Barrier Properties of Bio-Nanocomposites Based on Plasticised Sugar Palm Starch and Nanofibrillated Celluloses from Sugar Palm Fibres

    Article • Journal of Biobased Materials and Bioenergy, April 2020, American Scientific Publishers

    Dr. R.A. Ilyas

  245. Effect of ultrasonication duration of polyvinyl alcohol (PVA) gel on characterizations of PVA film

    Article • Journal of Materials Research and Technology, March 2020, Elsevier

    Dr. R.A. Ilyas

  246. Production, Processes and Modification of Nanocrystalline Cellulose from Agro-Waste: A Review

    Article • February 2020, IntechOpen

    Dr. R.A. Ilyas

  247. Effect of fiber orientation and fiber loading on the mechanical and thermal properties of sugar palm yarn fiber reinforced unsaturated polyester resin composites

    Article • Polimery, February 2020, Industrial Chemistry Research Institute

    Dr. R.A. Ilyas

  248. The Preparation Methods and Processing of Natural Fibre Bio-polymer Composites

    Article • Current Organic Synthesis, January 2020, Bentham Science Publishers

    Professor S.M. Sapuan, Dr. R.A. Ilyas

  249. Transparent and antimicrobial cellulose film from ginger nanofiber

    Article • Food Hydrocolloids, January 2020, Elsevier

    Dr. R.A. Ilyas

  250. Characterization studies of biopolymeric matrix and cellulose fibres based composites related to functionalized fibre-matrix interface

    Article • January 2020, Elsevier

    Dr. R.A. Ilyas

  251. Woods and composites cantilever beam: A comprehensive review of experimental and numerical creep methodologies

    Article • Journal of Materials Research and Technology, January 2020, Elsevier

    Dr. R.A. Ilyas

  252. Natural Polylactic Acid-Based Fiber Composites: A Review

    Article • January 2020, Elsevier

    Dr. R.A. Ilyas

  253. The Role of Microbial Electrolysis Cell in Bioenergy Production: Current Applications and Pilot Plant Experiences

    Article • January 2020, Springer Science + Business Media

    Dr. R.A. Ilyas

  254. Essential Factors for Performance Improvement and the Implementation of Microbial Electrolysis Cells (MECs)

    Article • January 2020, Springer Science + Business Media

    Dr. R.A. Ilyas

  255. Development and Processing of PLA, PHA, and Other Biopolymers

    Article • January 2020, Elsevier

    Dr. R.A. Ilyas

  256. Nanocellulose/Starch Biopolymer Nanocomposites: Processing, Manufacturing, and Applications

    Article • January 2020, Elsevier

    Dr. R.A. Ilyas

  257. Thermal Properties of Woven Kenaf/Carbon Fibre-Reinforced Epoxy Hybrid Composite Panels

    Article • International Journal of Polymer Science, December 2019, Hindawi Publishing Corporation

    Dr. R.A. Ilyas

  258. Thermal properties of treated sugar palm yarn/glass fiber reinforced unsaturated polyester hybrid composites

    Article • Journal of Materials Research and Technology, December 2019, Elsevier

    Dr. R.A. Ilyas

  259. Effect of cogon grass fibre on the thermal, mechanical and biodegradation properties of thermoplastic cassava starch biocomposite

    Article • International Journal of Biological Macromolecules, November 2019, Elsevier

    Dr. R.A. Ilyas

  260. Effect of sonication time on the thermal stability, moisture absorption, and biodegradation of water hyacinth (Eichhornia crassipes) nanocellulose-filled bengkuang (Pachyrhizus erosus) starch biocomposites

    Article • Journal of Materials Research and Technology, November 2019, Elsevier

    Dr. R.A. Ilyas

  261. Highly transparent and antimicrobial PVA based bionanocomposites reinforced by ginger nanofiber

    Article • Polymer Testing, October 2019, Elsevier

    Dr. R.A. Ilyas

  262. Degradation and physical properties of sugar palm starch/sugar palm nanofibrillated cellulose bionanocomposite

    Article • Polimery, October 2019, Industrial Chemistry Research Institute

    Dr. R.A. Ilyas

  263. Mechanical properties of sugar palm yarn/woven glass fiber reinforced unsaturated polyester composites: effect of fiber loadings and alkaline treatment

    Article • Polimery, October 2019, Industrial Chemistry Research Institute

    Dr. R.A. Ilyas

  264. Sugar palm ( Arenga pinnata [ Wurmb .] Merr ) starch films containing sugar palm nanofibrillated cellulose as reinforcement: Water barrier properties

    Article • Polymer Composites, September 2019, Wiley

    Dr. R.A. Ilyas

  265. Water absorption and water solubility properties of sago starch biopolymer composite films filled with sugar palm particles

    Article • Polimery, September 2019, Industrial Chemistry Research Institute

    Dr Mohammad Jawaid, Dr. R.A. Ilyas

  266. Effect of sugar palm nanofibrillated cellulose concentrations on morphological, mechanical and physical properties of biodegradable films based on agro-waste sugar palm (Arenga pinnata (Wurmb.) Merr) starch

    Article • Journal of Materials Research and Technology, September 2019, Elsevier

    Dr. R.A. Ilyas

  267. Degradation of Medium Density Fibreboard and Particleboard Mechanical Performance after Exposed to Different Environmental Condition

    Article • International Journal of Recent Technology and Engineering (IJRTE), August 2019, Blue Eyes Intelligence Engineering and Sciences Engineering and Sciences Publication - BEIESP

    Dr. R.A. Ilyas, Blue Eyes Intelligence Engineering and Sciences Blue Eyes Intelligence Engineering and Sciences Publication

  268. Effect of Fibre Length and Sea Water Treatment on Mechanical Properties of Sugar Palm Fibre Reinforced Unsaturated Polyester Composites

    Article • International Journal of Recent Technology and Engineering (IJRTE), August 2019, Blue Eyes Intelligence Engineering and Sciences Engineering and Sciences Publication - BEIESP

    Dr. R.A. Ilyas, Blue Eyes Intelligence Engineering and Sciences Blue Eyes Intelligence Engineering and Sciences Publication

  269. A simple method for improving the properties of the sago starch films prepared by using ultrasonication treatment

    Article • Food Hydrocolloids, August 2019, Elsevier

    Dr. R.A. Ilyas

  270. Physical and thermal properties of treated sugar palm/glass fibre reinforced thermoplastic polyurethane hybrid composites

    Article • Journal of Materials Research and Technology, July 2019, Elsevier

    Dr Mohammad Jawaid, Dr. R.A. Ilyas

  271. Effect of sago starch and plasticizer content on the properties of thermoplastic films: mechanical testing and cyclic soaking-drying

    Article • Polimery, June 2019, Industrial Chemistry Research Institute

    Dr Mohammad Jawaid, Dr. R.A. Ilyas

  272. Sugar palm (Arenga pinnata (Wurmb.) Merr) cellulosic fibre hierarchy: a comprehensive approach from macro to nano scale

    Article • Journal of Materials Research and Technology, May 2019, Elsevier

    Dr. R.A. Ilyas

  273. Sugar palm nanofibrillated cellulose (Arenga pinnata (Wurmb.) Merr): Effect of cycles on their yield, physic-chemical, morphological and thermal behavior

    Article • International Journal of Biological Macromolecules, February 2019, Elsevier

    Dr. R.A. Ilyas

  274. Design and Fabrication of a Shoe Shelf From Kenaf Fiber Reinforced Unsaturated Polyester Composites

    Article • January 2019, Elsevier

    Dr. R.A. Ilyas

  275. Development and characterization of sugar palm nanocrystalline cellulose reinforced sugar palm starch bionanocomposites

    Article • Carbohydrate Polymers, December 2018, Elsevier

    Dr. R.A. Ilyas

  276. Sugar palm nanocrystalline cellulose reinforced sugar palm starch composite: Degradation and water-barrier properties

    Article • IOP Conference Series Materials Science and Engineering, June 2018, Institute of Physics Publishing

    Dr. R.A. Ilyas

  277. Nanocrystalline Cellulose as Reinforcement for Polymeric Matrix Nanocomposites and its Potential Applications: A Review

    Article • Current Analytical Chemistry, May 2018, Bentham Science Publishers

    Professor S.M. Sapuan, Dr. R.A. Ilyas

  278. A Heuristics Approach for Classroom Scheduling Using Genetic Algorithm Technique

    Article • Journal of Physics Conference Series, April 2018, Institute of Physics Publishing

    Dr. R.A. Ilyas

  279. Isolation and characterization of nanocrystalline cellulose from sugar palm fibres (Arenga Pinnata)

    Article • Carbohydrate Polymers, February 2018, Elsevier

    Dr. R.A. Ilyas

  280. Sugar Palm Starch-Based Composites for Packaging Applications

    Article • November 2017, Springer Science + Business Media

    Professor S.M. Sapuan, Dr. R.A. Ilyas

  281. Effect of delignification on the physical, thermal, chemical, and structural properties of sugar palm fibre

    Article • BioResources, October 2017, BioResources

    Dr. R.A. Ilyas

  282. Mechanical behaviour of magnesium alloy AZ91D using split Hopkinson tensile bar (SHTB)

    Article • December 2009, SPIE

    Dr. R.A. Ilyas

  283. Compressive properties of AM50 and AZ91D alloys using split Hopkinson pressure bar

    Article • July 2009, SPIE

    Dr. R.A. Ilyas

  284. Development of Sugar Palm–Based Products: A Community Project

    Article • Taylor & Francis

    Dr. R.A. Ilyas

  285. Characterization of Sugar Palm Nanocellulose and Its Potential for Reinforcement with a Starch-Based Composite

    Article • Taylor & Francis

    Dr. R.A. Ilyas