All Stories

  1. Lignin-assisted carbon nanotube dispersion for conductive ink application

    Article • January 2020, American Institute of Physics

    Prof Mariatti M. Mariatti Jaafar

  2. Graphene/polyaniline nanocomposites: Effect of surfactant and fabrication methods

    Article • January 2020, American Institute of Physics

    Prof Mariatti M. Mariatti Jaafar

  3. Fabrication and characterization of silver nanoparticles/PVA composites for flexible electronic application

    Article • January 2020, American Institute of Physics

    Prof Mariatti M. Mariatti Jaafar

  4. Flexibility and sensitivity of graphene nanoplatelets-polydimethylsiloxane strain sensor

    Article • January 2020, American Institute of Physics

    Prof Mariatti M. Mariatti Jaafar

  5. Properties of conductive PANI fabricated using different dopant acids and molar ratios

    Article • January 2020, American Institute of Physics

    Prof Mariatti M. Mariatti Jaafar

  6. Electrical conductivity of silver conductive ink synthesized using chemical reduction method

    Article • January 2020, American Institute of Physics

    Prof Mariatti M. Mariatti Jaafar

  7. Preliminary study on reactive compatibilisation of poly-lactic acid with maleic anhydride and dicumyl peroxide for fabrication of 3D printed filaments

    Article • January 2020, American Institute of Physics

    Badrul Yahaya, Prof Mariatti M. Mariatti Jaafar, Asmak Abdul Samat

  8. Polylactic Acid Scaffold Fabricated by Combination of Solvent Casting and Salt Leaching Techniques: Influence of β-Tricalcium Phosphate Contents

    Article • Solid State Phenomena, September 2017, Trans Tech Publications

    Prof Mariatti M. Mariatti Jaafar

  9. Fabrication of Carbonate Apatite Based on Hydrothermal Reaction Using Freeze-Casted β-TCP Precursor

    Article • Solid State Phenomena, September 2017, Trans Tech Publications

    Prof Mariatti M. Mariatti Jaafar, NORMAHIRA MAMAT

  10. Influence of Hydroxyl and Carboxyl Functionalized Multi-Walled Carbon Nanotube and Filler Loading on the Tensile Properties of Epoxy Composites

    Article • Solid State Phenomena, September 2017, Trans Tech Publications

    Prof Mariatti M. Mariatti Jaafar

  11. Effect of Different Solutions on Hydrothermal Treatment of β-Tricalcium Phosphate Scaffold

    Article • Solid State Phenomena, September 2017, Trans Tech Publications

    Prof Mariatti M. Mariatti Jaafar

  12. Linear low-density polyethylene/silicone rubber nanocomposites

    Article • Journal of Elastomers & Plastics, April 2017, SAGE Publications

    Prof Mariatti M. Mariatti Jaafar, Hanafi Ismail, Prof Hanafi H Ismail

  13. Synergy effects of graphene and multiwalled carbon nanotubes hybrid system on properties of epoxy nanocomposites

    Article • Journal of Reinforced Plastics and Composites, February 2017, SAGE Publications

    Prof Mariatti M. Mariatti Jaafar

  14. Synthesis of TiO2 Nanotube Arrays in NaOH Added Ethylene Glycol Electrolyte and the Effect of Annealing Temperature on the Nanotube Arrays to their Photocurrent Performance

    Article • Key Engineering Materials, July 2016, Trans Tech Publications

    Prof Mariatti M. Mariatti Jaafar

  15. Fabrication and characterization of porous β-tricalcium phosphate scaffolds coated with alginate

    Article • Ceramics International, March 2016, Elsevier

    Prof Mariatti M. Mariatti Jaafar

  16. Electromagnetic interference shielding performance of epoxy composites filled with multiwalled carbon nanotubes/manganese zinc ferrite hybrid fillers

    Article • Journal of Magnetism and Magnetic Materials, March 2016, Elsevier

    Prof Mariatti M. Mariatti Jaafar

  17. Dielectric properties of surface treated multi-walled carbon nanotube/epoxy thin film composites

    Article • Composites Part B Engineering, February 2016, Elsevier

    Prof Mariatti M. Mariatti Jaafar

  18. Laminate Design of Lightweight Glass Fiber Reinforced Epoxy Composite for Electrical Transmission Structure

    Article • Procedia Chemistry, January 2016, Elsevier

    Prof Mariatti M. Mariatti Jaafar

  19. Optimization of Conductive Thin Film Epoxy Composites Properties Using Desirability Optimization Methodology

    Article • Journal of Optimization, January 2016, Hindawi Publishing Corporation

    Prof Mariatti M. Mariatti Jaafar

  20. Properties of Calcium Phosphate Scaffolds Produced by Freeze-Casting

    Article • Procedia Chemistry, January 2016, Elsevier

    Prof Mariatti M. Mariatti Jaafar

  21. Properties of Fiberglass/MWCNT Buckypaper/Epoxy Laminated Composites

    Article • Procedia Chemistry, January 2016, Elsevier

    Prof Mariatti M. Mariatti Jaafar

  22. Utilization of Polyvinyl Alcohol on Properties of Recycled Polypropylene/Peanut Shell Powder Composites

    Article • Procedia Chemistry, January 2016, Elsevier

    Prof Mariatti M. Mariatti Jaafar

  23. Effect of Filler Loading on the Tensile Properties of Multi-walled Carbon Nanotube and Graphene Nanopowder filled Epoxy Composites

    Article • Procedia Chemistry, January 2016, Elsevier

    Prof Mariatti M. Mariatti Jaafar

  24. Enhancement of Thermal Conductivity of Cyanoacrylate with Different Types of Nanofillers and Loading

    Article • Procedia Chemistry, January 2016, Elsevier

    Prof Mariatti M. Mariatti Jaafar

  25. Thermal and Flame Resistant Properties of Poly (Lactic Acid)/Poly (Methyl Methacrylate) Blends Containing Halogen-free Flame Retardant

    Article • Procedia Chemistry, January 2016, Elsevier

    Prof Mariatti M. Mariatti Jaafar

  26. Dielectric Breakdown Strength and Flammability Properties of Flame Retardant Filler/PLLA-PLA Microsphere/Kenaf Fiber Composites

    Article • Procedia Chemistry, January 2016, Elsevier

    Prof Mariatti M. Mariatti Jaafar

  27. Dielectric and Thermal Properties of Treated and Untreated MWCNT filled DER 332 Epoxy and OP392 Epoxy

    Article • Procedia Chemistry, January 2016, Elsevier

    Prof Mariatti M. Mariatti Jaafar

  28. Properties of treated calcium copper titanate filled epoxy thin film composites for electronic applications

    Article • Journal of Applied Polymer Science, December 2015, Wiley

    Prof Mariatti M. Mariatti Jaafar

  29. Particle Dispersion Model for Predicting the Percolation Threshold of Nano-Silver Composite

    Article • Arabian Journal for Science and Engineering, December 2015, Springer Science + Business Media

    Prof Mariatti M. Mariatti Jaafar

  30. Electrically Conductive Adhesives (ECAs)

    Article • Asia-Pacific Journal of Chemical Engineering, November 2015, Wiley

    Dr Muhammad Zulkarnain, Prof Mariatti M. Mariatti Jaafar

  31. Investigation of electrical treeing structures in SiR/Alumina nanocomposites

    Article • October 2015, Institute of Electrical & Electronics Engineers (IEEE)

    Prof Mariatti M. Mariatti Jaafar

  32. Properties of nano-sized synthetic diamond and boron nitride filled different types of epoxy resin

    Article • Journal of Materials Science Materials in Electronics, September 2015, Springer Science + Business Media

    Prof Mariatti M. Mariatti Jaafar

  33. Particle Arrangement Design for Predicting the Percolation Threshold of Silver/Epoxy Composite for Electrically Conductive Adhesive Application

    Article • Journal of Electronic Materials, July 2015, Springer Science + Business Media

    Prof Mariatti M. Mariatti Jaafar

  34. A study of the degradation of compatibilized and uncompatibilized peanut shell powder/recycled polypropylene composites due to natural weathering

    Article • Journal of Vinyl and Additive Technology, July 2015, Wiley

    Prof Mariatti M. Mariatti Jaafar, Prof Hanafi H Ismail

  35. Dielectric and thermal properties of CCTO/epoxy composites for embedded capacitor applications: mixing and fabrication methods

    Article • Journal of Materials Science Materials in Electronics, July 2015, Springer Science + Business Media

    Prof Mariatti M. Mariatti Jaafar

  36. Electrical tree characteristics with the addition of alumina in silicone rubber

    Article • July 2015, Institute of Electrical & Electronics Engineers (IEEE)

    Prof Mariatti M. Mariatti Jaafar

  37. Investigation on dielectric strength of alumina nanofiller with SiR/EPDM composites for HV insulator

    Article • July 2015, Institute of Electrical & Electronics Engineers (IEEE)

    Prof Mariatti M. Mariatti Jaafar

  38. Mild functionalization of carbon nanotubes filled epoxy composites: Effect on electromagnetic interferences shielding effectiveness

    Article • Journal of Applied Polymer Science, June 2015, Wiley

    Prof Mariatti M. Mariatti Jaafar

  39. Evaluation of PP/EPDM nanocomposites filled with SiO2, TiO2and ZnO nanofillers as thermoplastic elastomeric insulators

    Article • Plastics Rubber and Composites Macromolecular Engineering, June 2015, Taylor & Francis

    Prof Mariatti M. Mariatti Jaafar

  40. Tensile and Dielectric Properties of Calcium Copper Titanate Filler in Epoxy Composites

    Article • Advanced Materials Research, June 2015, Trans Tech Publications

    Prof Mariatti M. Mariatti Jaafar

  41. Tensile Properties and Melt Flow Index of Polypropylene/Ethylene Propylene Diene Monomer Nanocomposites

    Article • Advanced Materials Research, June 2015, Trans Tech Publications

    Prof Mariatti M. Mariatti Jaafar

  42. Fabrication and Properties of Multi-Walled Carbon Nanotubes Buckypaper

    Article • Advanced Materials Research, June 2015, Trans Tech Publications

    Prof Mariatti M. Mariatti Jaafar

  43. Polymer composites, biomaterials, conductive

    Article • Materials Science Forum, June 2015, Trans Tech Publications

    Prof Mariatti M. Mariatti Jaafar

  44. Dielectric properties and thermal properties of calcium copper titanate and barium titanate hybrid fillers filled epoxy thin film composites for electronic packaging applications

    Article • Journal of Materials Science Materials in Electronics, May 2015, Springer Science + Business Media

    Prof Mariatti M. Mariatti Jaafar

  45. Synthesis and Studies on the Effect of Phenyl Side – Chain Content on Refractive Index of Polysiloxane Resin

    Article • Applied Mechanics and Materials, April 2015, Trans Tech Publications

    Prof Mariatti M. Mariatti Jaafar

  46. Thermo‐physical, thermal degradation, and flexural properties of betel nut husk fiber reinforced vinyl ester composites

    Article • Polymer Composites, January 2015, Wiley

    Prof Mariatti M. Mariatti Jaafar, Dr Mohammad Jawaid

  47. Impact behaviour of woven coir-epoxy composite: Effects of woven density and woven fabric treatment

    Article • Proceedings of the Institution of Mechanical Engineers Part L Journal of Materials Design and Applications, January 2015, SAGE Publications

    Prof Mariatti M. Mariatti Jaafar

  48. Dielectric properties of inorganic fillers filled epoxy thin film

    Article • January 2015, American Institute of Physics

    Prof Mariatti M. Mariatti Jaafar

  49. Thermal properties and dynamic mechanical properties of ceramic fillers filled epoxy composites

    Article • January 2015, American Institute of Physics

    Prof Mariatti M. Mariatti Jaafar

  50. Electrical conductivity properties of MWCNT buckypaper and MWCNT buckypaper/epoxy composites: Effect of loading and pressure

    Article • January 2015, American Institute of Physics

    Prof Mariatti M. Mariatti Jaafar

  51. SYNTHESIS OF SILVER NANOPARTICLES BY CHEMICAL REDUCTION METHOD: EFFECT OF REDUCING AGENT AND SURFACTANT CONCENTRATION

    Article • International Journal of Automotive and Mechanical Engineering, December 2014, Universiti Malaysia Pahang Publisher

    Prof Mariatti M. Mariatti Jaafar

  52. COMPARISON OF PROPERTIES OF MWCNT/CARBON FIBRE/ EPOXY LAMINATED COMPOSITES PREPARED BY SOLVENT SPRAYING METHOD

    Article • International Journal of Automotive and Mechanical Engineering, December 2014, Universiti Malaysia Pahang Publisher

    Prof Mariatti M. Mariatti Jaafar

  53. Predicting the RVE size of micro-particle composite for electrical purpose using particles dispersion developed

    Article • Microsystem Technologies, December 2014, Springer Science + Business Media

    Prof Mariatti M. Mariatti Jaafar

  54. Nano-sized boron nitride epoxy composites for underfill application: effect of diluent and filler loading

    Article • Journal of Materials Science Materials in Electronics, November 2014, Springer Science + Business Media

    Prof Mariatti M. Mariatti Jaafar

  55. Effect of Alkali Treatment on the Physical, Mechanical, and Morphological Properties of Waste Betel Nut (Areca catechu) Husk Fibre

    Article • BioResources, October 2014, BioResources

    Professor S.M. Sapuan, Dr Mohammad Jawaid, Prof Mariatti M. Mariatti Jaafar

  56. Dielectric and thermal properties of flame retardant fillers in polypropylene/ethylene propylene diene monomer composites

    Article • Journal of Reinforced Plastics and Composites, September 2014, SAGE Publications

    Prof Mariatti M. Mariatti Jaafar

  57. Silane treatment of magnetite filler and its effect on the properties of magnetite-filled epoxy thin-film composites

    Article • Polymer Bulletin, September 2014, Springer Science + Business Media

    Prof Mariatti M. Mariatti Jaafar

  58. Properties of calcium copper titanate and barium titanate filled epoxy composites for electronic applications: effect of filler loading and hybrid fillers

    Article • Journal of Materials Science Materials in Electronics, August 2014, Springer Science + Business Media

    Prof Mariatti M. Mariatti Jaafar

  59. Tensile Properties of Poly(L-Lactic) Acid(PLLA) Blends

    Article • Advanced Materials Research, August 2014, Trans Tech Publications

    Prof Mariatti M. Mariatti Jaafar

  60. Dielectric Properties of BaTiO3/Epoxy and MWCNT/Epoxy Composites

    Article • Advanced Materials Research, August 2014, Trans Tech Publications

    Prof Mariatti M. Mariatti Jaafar

  61. Comparison on Tensile Properties of Graphene and Multi-Walled Carbon Nanotubes/Epoxy Thin Film Composites

    Article • Advanced Materials Research, August 2014, Trans Tech Publications

    Prof Mariatti M. Mariatti Jaafar

  62. Electrical insulation characteristics of alumina, titania, and organoclay nanoparticles filled PP/EPDM nanocomposites

    Article • Journal of Applied Polymer Science, July 2014, Wiley

    Prof Mariatti M. Mariatti Jaafar

  63. Characterization of physical, mechanical, thermal and morphological properties of agro-waste betel nut (Areca catechu) husk fibre

    Article • Journal of Cleaner Production, June 2014, Elsevier

    Professor S.M. Sapuan, Prof Mariatti M. Mariatti Jaafar

  64. Partial Discharge Characteristic of Low Density Polyethylene and Silica Nanocomposite

    Article • Applied Mechanics and Materials, June 2014, Trans Tech Publications

    Prof Mariatti M. Mariatti Jaafar

  65. Single and hybrid mineral fillers (talc/silica and talc/calcium carbonate)-filled polypropylene composites: Effects of filler loading and ratios

    Article • Journal of Vinyl and Additive Technology, May 2014, Wiley

    Prof Mariatti M. Mariatti Jaafar

  66. Optimization of magnetic and dielectric properties of surface-treated magnetite-filled epoxy composites by factorial design

    Article • Journal of Magnetism and Magnetic Materials, April 2014, Elsevier

    Prof Mariatti M. Mariatti Jaafar

  67. Tensile, dielectric, and thermal properties of epoxy composites filled with silica, mica, and calcium carbonate

    Article • Journal of Materials Science Materials in Electronics, March 2014, Springer Science + Business Media

    Prof Mariatti M. Mariatti Jaafar

  68. Enhanced conductivity behavior of polydimethylsiloxane (PDMS) hybrid composites containing exfoliated graphite nanoplatelets and carbon nanotubes

    Article • Composites Part B Engineering, March 2014, Elsevier

    Professor James JC Busfield, Prof Mariatti M. Mariatti Jaafar

  69. Properties of graphene nanopowder and multi-walled carbon nanotube-filled epoxy thin-film nanocomposites for electronic applications: The effect of sonication time and filler loading

    Article • Composites Part A Applied Science and Manufacturing, March 2014, Elsevier

    Prof Mariatti M. Mariatti Jaafar

  70. The Effects of Modifying Peanut Shell Powder with Polyvinyl Alcohol on the Properties of Recycled Polypropylene and Peanut Shell Powder Composites

    Article • BioResources, February 2014, BioResources

    Prof Mariatti M. Mariatti Jaafar, Hanafi Ismail, Prof Hanafi H Ismail

  71. Analysis of Woven Natural Fiber Fabrics Prepared using Self-Designed Handloom

    Article • International Journal of Automotive and Mechanical Engineering, December 2013, Universiti Malaysia Pahang Publisher

    Prof Mariatti M. Mariatti Jaafar

  72. Short-Term Breakdown in Silicone Rubber Based Nanocomposites Caused by Electrical Treeing

    Article • Advanced Materials Research, December 2013, Trans Tech Publications

    Prof Mariatti M. Mariatti Jaafar

  73. Electrical Properties of LLDPE/SR with Nano-Silica and Nanoboron Nitride

    Article • Advanced Materials Research, November 2013, Trans Tech Publications

    Prof Mariatti M. Mariatti Jaafar, Hanafi Ismail, Prof Hanafi H Ismail

  74. Comparison on the Properties of Glass Fiber/MWCNT/Epoxy and Carbon Fiber/MWCNT/Epoxy Composites

    Article • Advanced Materials Research, November 2013, Trans Tech Publications

    Prof Mariatti M. Mariatti Jaafar

  75. A Comparative Study of Dielectric Strength between SiR/EPDM and PP/EPDM Blends with Various Type of Nanofillers

    Article • Advanced Materials Research, November 2013, Trans Tech Publications

    Prof Mariatti M. Mariatti Jaafar

  76. Electrical Tree Growth in Silicone Rubber/Organo-Montmorillonite Nanocomposites under AC Ramp Voltage

    Article • Jurnal Teknologi (Sciences & Engineering), October 2013, Penerbit UTM Press

    Prof Mariatti M. Mariatti Jaafar

  77. Electrical treeing initiation and propagation in silicone rubber nanocomposites

    Article • October 2013, Institute of Electrical & Electronics Engineers (IEEE)

    Prof Mariatti M. Mariatti Jaafar

  78. Effect of Peanut Shell Powder Content on the Properties of Recycled Polypropylene (RPP)/ Peanut Shell Powder (PSP) Composites

    Article • BioResources, September 2013, BioResources

    Prof Mariatti M. Mariatti Jaafar, Hanafi Ismail, Prof Hanafi H Ismail

  79. Effect of Anodizing on Strength of Carbon-Fibre Aluminium-Laminated Composites

    Article • Advanced Materials Research, August 2013, Trans Tech Publications

    Prof Mariatti M. Mariatti Jaafar

  80. Preface

    Article • Composite Interfaces, July 2013, Taylor & Francis

    Prof Mariatti M. Mariatti Jaafar

  81. Effect of Alkali Treatment on the Tensile Behavior and Structure of Betel Nut (Areca catechu) Husk Fiber

    Article • Advanced Materials Research, May 2013, Trans Tech Publications

    Professor S.M. Sapuan, Prof Mariatti M. Mariatti Jaafar

  82. Effect of cross-link density on optoelectronic properties of thermally cured 1,2-epoxy-5-hexene incorporated polysiloxane

    Article • Materials & Design (1980-2015), May 2013, Elsevier

    Prof Mariatti M. Mariatti Jaafar

  83. Facile Synthesis of Silver Nanoparticles by Chemical Reduction Route

    Article • Materials Science Forum, May 2013, Trans Tech Publications

    Prof Mariatti M. Mariatti Jaafar

  84. Influence of Woven and Cross-Ply Laminates on Mechanical Properties of Coir Epoxy Composite

    Article • Applied Mechanics and Materials, April 2013, Trans Tech Publications

    Prof Mariatti M. Mariatti Jaafar

  85. Effect of hybrid nanofillers on the thermal, mechanical, and physical properties of polypropylene composites

    Article • Polymer Bulletin, December 2012, Springer Science + Business Media

    Prof Mariatti M. Mariatti Jaafar

  86. Transparent, electrically conductive, and flexible films made from multiwalled carbon nanotube/epoxy composites

    Article • Composites Part B Engineering, December 2012, Elsevier

    Chair Professor Jang Kyo Kim, Prof Mariatti M. Mariatti Jaafar

  87. Impact and Flexural Properties of Imbalance Plain Woven Coir and Kenaf Composite

    Article • Applied Mechanics and Materials, December 2012, Trans Tech Publications

    Prof Mariatti M. Mariatti Jaafar

  88. Electrical performance of silicone rubber / organo-montmorillonite nanocomposites under high voltage application

    Article • December 2012, Institute of Electrical & Electronics Engineers (IEEE)

    Prof Mariatti M. Mariatti Jaafar

  89. Flexibility improvement of epoxy nanocomposites thin films using various flexibilizing additives

    Article • Composites Part B Engineering, December 2012, Elsevier

    Prof Mariatti M. Mariatti Jaafar

  90. Effects of hybrid fillers based on micro- and nano-sized silver particles on the electrical performance of epoxy composites

    Article • Journal of Materials Science Materials in Electronics, November 2012, Springer Science + Business Media

    Prof Mariatti M. Mariatti Jaafar

  91. Organo-montmorillonite as an electrical treeing retardant for polymeric insulating materials

    Article • September 2012, Institute of Electrical & Electronics Engineers (IEEE)

    Prof Mariatti M. Mariatti Jaafar

  92. Silver-filled epoxy composites: effect of hybrid and silane treatment on thermal properties

    Article • Polymer Bulletin, July 2012, Springer Science + Business Media

    Prof Mariatti M. Mariatti Jaafar

  93. Effect of processing methods and functional groups on the properties of multi-walled carbon nanotube filled poly(dimethyl siloxane) composites

    Article • Polymer Bulletin, June 2012, Springer Science + Business Media

    Professor James JC Busfield, Prof Mariatti M. Mariatti Jaafar

  94. Thermal and flame properties of calcium borate and intumescent ammonium polyphosphate in epoxy/glass fiber composites

    Article • Journal of Fire Sciences, May 2012, SAGE Publications

    Prof Mariatti M. Mariatti Jaafar

  95. Effect of secondary forces in the compatibility of two incompatible biodegradable polymers

    Article • Polymer Bulletin, May 2012, Springer Science + Business Media

    Prof Mariatti M. Mariatti Jaafar

  96. Thermal properties and moisture absorption of nanofillers-filled epoxy composite thin film for electronic application

    Article • Polymers for Advanced Technologies, April 2012, Wiley

    Prof Mariatti M. Mariatti Jaafar

  97. Evaluation of the flexural properties and bioactivity of bioresorbable PLLA/PBSL/CNT and PLLA/PBSL/TiO2 nanocomposites

    Article • Composites Part B Engineering, April 2012, Elsevier

    Prof Mariatti M. Mariatti Jaafar

  98. Properties of flame-retardant fillers in polypropylene/ethylene propylene diene monomer composites

    Article • Journal of Thermoplastic Composite Materials, March 2012, SAGE Publications

    Prof Mariatti M. Mariatti Jaafar

  99. Polypropylene/natural rubber composites filled with recycled newspaper: Effect of chemical treatment using maleic anhydride-grafted polypropylene and 3-aminopropyltriethoxysilane

    Article • Polymer Composites, March 2012, Wiley

    Prof Mariatti M. Mariatti Jaafar

  100. Body Armor Technology: A Review of Materials, Construction Techniques and Enhancement of Ballistic Energy Absorption

    Article • Advanced Materials Research, March 2012, Trans Tech Publications

    Prof Mariatti M. Mariatti Jaafar

  101. Magnetic, dielectric and thermal stability of Ni–Zn ferrite-epoxy composite thin films for electronic applications

    Article • Journal of Magnetism and Magnetic Materials, March 2012, Elsevier

    Prof Mariatti M. Mariatti Jaafar

  102. Effect of intumescent ammonium polyphosphate (APP) and melamine cyanurate (MC) on the properties of epoxy/glass fiber composites

    Article • Composites Part B Engineering, March 2012, Elsevier

    Prof Mariatti M. Mariatti Jaafar

  103. Effect of hybrid phenolic hollow microsphere and silica-filled vinyl ester composites

    Article • Journal of Composite Materials, February 2012, SAGE Publications

    Prof Mariatti M. Mariatti Jaafar

  104. Mechanical and thermal properties of polymethylmethacrylate bone cement composites incorporated with hydroxyapatite and glass-ceramic fillers

    Article • Journal of Applied Polymer Science, February 2012, Wiley

    Prof Mariatti M. Mariatti Jaafar

  105. Design Consideration of Bio-Inspired Contractible Water-Jet Propulsor for Mini Autonomous Underwater Robot

    Article • Advanced Materials Research, February 2012, Trans Tech Publications

    Prof Mariatti M. Mariatti Jaafar

  106. Exploring the Potential of Betel Nut Husk Fiber as Reinforcement in Polymer Composites: Effect of Fiber Maturity

    Article • Procedia Chemistry, January 2012, Elsevier

    Professor S.M. Sapuan, Prof Mariatti M. Mariatti Jaafar

  107. Mechanical properties of multi-walled carbon nanotube (MWCNT)/polymethyl methacrylite (PMMA) nanocomposite prepared via the coagulation method

    Article • January 2012, American Institute of Physics

    Prof Mariatti M. Mariatti Jaafar

  108. Thermal stability and electrical conductivity of multiwalled carbon nanotube (MWCNT)/polymethyl methacrylite (PMMA) nanocomposite prepared via the coagulation method

    Article • January 2012, American Institute of Physics

    Prof Mariatti M. Mariatti Jaafar

  109. Fabrication and characterization of nano filler-filled epoxy composites for underfill application

    Article • Journal of Materials Science Materials in Electronics, December 2011, Springer Science + Business Media

    Prof Mariatti M. Mariatti Jaafar

  110. Effect of thermal conductive fillers on the properties of polypropylene composites

    Article • Journal of Thermoplastic Composite Materials, December 2011, SAGE Publications

    Prof Mariatti M. Mariatti Jaafar

  111. Benzoyl Peroxide Initiated Grafting of 3-Aminopropyltriethoxysilane to Multiwalled Carbon Nanotubes

    Article • Advanced Materials Research, October 2011, Trans Tech Publications

    Prof Mariatti M. Mariatti Jaafar

  112. Properties of spin coated epoxy/silica thin film composites: Effect of nano- and micron-size fillers

    Article • Composites Part A Applied Science and Manufacturing, October 2011, Elsevier

    Prof Mariatti M. Mariatti Jaafar

  113. Thermal stability and electrical behavior of polydimethylsiloxane nanocomposites with carbon nanotubes and carbon black fillers

    Article • Journal of Composite Materials, September 2011, SAGE Publications

    Prof Mariatti M. Mariatti Jaafar

  114. Properties of epoxy nanocomposite thin films prepared by spin coating technique

    Article • Journal of Plastic Film & Sheeting, September 2011, SAGE Publications

    Prof Mariatti M. Mariatti Jaafar

  115. Properties of Multi-Walled Carbon Nanotube / Polymethyl Methacrylite Nanocomposite Prepared via a Modified Coagulation Method

    Article • Advanced Materials Research, September 2011, Trans Tech Publications

    Prof Mariatti M. Mariatti Jaafar

  116. Properties of synthetic diamond and graphene nanoplatelet-filled epoxy thin film composites for electronic applications

    Article • Journal of Materials Science Materials in Electronics, August 2011, Springer Science + Business Media

    Prof Mariatti M. Mariatti Jaafar

  117. Mechanical Properties Evaluation of Woven Coir and Kevlar Reinforced Epoxy Composites

    Article • Advanced Materials Research, July 2011, Trans Tech Publications

    Prof Mariatti M. Mariatti Jaafar

  118. Effects of types of fillers and filler loading on the properties of silicone rubber composites

    Article • Journal of Reinforced Plastics and Composites, July 2011, SAGE Publications

    Prof Mariatti M. Mariatti Jaafar

  119. Properties of Single and Hybrid Aluminum and Silver Fillers Filled High-Density Polyethylene Composites

    Article • Journal of Thermoplastic Composite Materials, June 2011, SAGE Publications

    Prof Mariatti M. Mariatti Jaafar

  120. Effects of the size and filler loading on the properties of copper- and silver-nanoparticle-filled epoxy composites

    Article • Journal of Applied Polymer Science, April 2011, Wiley

    Prof Mariatti M. Mariatti Jaafar

  121. Changes in the crystallinity and mechanical properties of poly(l-lactic acid)/poly(butylene succinate-co-l-lactate) blend with annealing process

    Article • Polymer Bulletin, February 2011, Springer Science + Business Media

    Prof Mariatti M. Mariatti Jaafar

  122. Tensile and Thermal Conductivity Properties of Epoxy Nanocomposites Thin Film by Spin Coating Technique

    Article • Key Engineering Materials, February 2011, Trans Tech Publications

    Prof Mariatti M. Mariatti Jaafar

  123. Effect of filler surface treatment on mechanical properties and thermal properties of single and hybrid filler-filled PP composites

    Article • Journal of Applied Polymer Science, November 2010, Wiley

    Prof Mariatti M. Mariatti Jaafar

  124. Fabrication of silica/epoxy thin film composite for electronic packaging application

    Article • November 2010, Institute of Electrical & Electronics Engineers (IEEE)

    Prof Mariatti M. Mariatti Jaafar

  125. Halogen free flame retardants for Epoxy substrate in electronic applications

    Article • November 2010, Institute of Electrical & Electronics Engineers (IEEE)

    Prof Mariatti M. Mariatti Jaafar

  126. Improvement of microstructures and properties of biodegradable PLLA and PCL blends compatibilized with a triblock copolymer

    Article • Materials Science and Engineering A, October 2010, Elsevier

    Prof Mariatti M. Mariatti Jaafar

  127. The Properties of Polymethyl Methacrylate (PMMA) Bone Cement Filled with Titania and Hydroxyapatite Fillers

    Article • Polymer-Plastics Technology and Engineering, September 2010, Taylor & Francis

    Prof Mariatti M. Mariatti Jaafar

  128. Effect of different types of silver and epoxy systems on the properties of silver/epoxy conductive adhesives

    Article • Journal of Materials Science Materials in Electronics, September 2010, Springer Science + Business Media

    Prof Mariatti M. Mariatti Jaafar, Assoc. Prof. Dr Khairul Anuar Shariff

  129. The effect of trimethylol propane tetraacrylate (TMPTA) and organoclay loading on the properties of electron beam irradiated ethylene vinyl acetate (EVA)/natural rubber (SMR L)/organoclay nanocomposites

    Article • Journal of Applied Polymer Science, July 2010, Wiley

    Prof Mariatti M. Mariatti Jaafar, Prof Hanafi H Ismail

  130. The properties of vinyl ester composites reinforced with different types of woven fabric and hollow phenolic microspheres

    Article • Journal of Reinforced Plastics and Composites, June 2010, SAGE Publications

    Prof Mariatti M. Mariatti Jaafar

  131. Characterization of microstructure and mechanical properties of biodegradable polymer blends of poly(L-lactic acid) and poly(butylene succinate-co-ε-caprolactone) with lysine triisocyanate

    Article • Polymer Engineering & Science, April 2010, Wiley

    Prof Mariatti M. Mariatti Jaafar

  132. Effects of surface-functionalized multi-walled carbon nanotubes on the properties of poly(dimethyl siloxane) nanocomposites

    Article • Composites Science and Technology, April 2010, Elsevier

    Prof Mariatti M. Mariatti Jaafar

  133. Mechanical properties of particulate-filler/woven-glass-fabric-filled vinyl ester composites

    Article • Journal of Vinyl and Additive Technology, March 2010, Wiley

    Prof Mariatti M. Mariatti Jaafar

  134. Effects of filler shape and size on the properties of silver filled epoxy composite for electronic applications

    Article • Journal of Materials Science Materials in Electronics, February 2010, Springer Science + Business Media

    Prof Mariatti M. Mariatti Jaafar

  135. Effect of PEO-PPO-PEO copolymer on the mechanical and thermal properties and morphological behavior of biodegradable poly (L-lactic acid) (PLLA) and poly (butylene succinate-co-L-lactate) (PBSL) blends

    Article • Polymers for Advanced Technologies, February 2010, Wiley

    Prof Mariatti M. Mariatti Jaafar

  136. Effects of different preparation methods on the properties of poly[ethylene-co-(vinyl acetate)]/(Standard Malaysian natural rubber)/organoclay nanocomposites

    Article • Journal of Vinyl and Additive Technology, December 2009, Wiley

    Prof Mariatti M. Mariatti Jaafar

  137. Characterization of the mechanical and thermal properties and morphological behavior of biodegradable poly(L-lactide)/poly(ε-caprolactone) and poly(L-lactide)/poly(butylene succinate-co-L-lactate) polymeric blends

    Article • Journal of Applied Polymer Science, November 2009, Wiley

    Prof Mariatti M. Mariatti Jaafar

  138. Effect of ultrasonication medium on the properties of copper nanoparticle-filled epoxy composite for electrical conductive adhesive (ECA) application

    Article • Journal of Materials Science Materials in Electronics, October 2009, Springer Science + Business Media

    Prof Mariatti M. Mariatti Jaafar

  139. Surface functionalization of multi-walled carbon nanotubes via electron reduction of benzophenone by potassium metal

    Article • Journal of Alloys and Compounds, July 2009, Elsevier

    Prof Mariatti M. Mariatti Jaafar

  140. Value adding limestone to filler grade through an ultra-fine grinding process in jet mill for use in plastic industries

    Article • Minerals Engineering, June 2009, Elsevier

    Prof Mariatti M. Mariatti Jaafar

  141. Comparison on the Properties of Nickel-Coated Graphite (NCG) and Graphite Particles as Conductive Fillers in Polypropylene (PP) Composites

    Article • Polymer-Plastics Technology and Engineering, May 2009, Taylor & Francis

    Prof Mariatti M. Mariatti Jaafar

  142. Effect of Polymethyl Methacrylate (PMMA) Powder to Liquid Monomer (P/L) Ratio and Powder Molecular Weight on the Properties of PMMA Cement

    Article • Polymer-Plastics Technology and Engineering, May 2009, Taylor & Francis

    Prof Mariatti M. Mariatti Jaafar

  143. Effects of lysine triisocyanate on the mode I fracture behavior of polymer blend of poly (l-lactic acid) and poly (butylene succinate-co-l-lactate)

    Article • Journal of Materials Science, April 2009, Springer Science + Business Media

    Prof Mariatti M. Mariatti Jaafar

  144. Effect of single-mineral filler and hybrid-mineral filler additives on the properties of polypropylene composites

    Article • Journal of Vinyl and Additive Technology, March 2009, Wiley

    Prof Mariatti M. Mariatti Jaafar

  145. Effect of electron beam irradiation on the properties of ethylene-(vinyl acetate) copolymer/natural rubber/organoclay nanocomposites

    Article • Journal of Vinyl and Additive Technology, March 2009, Wiley

    Prof Mariatti M. Mariatti Jaafar

  146. The Properties of Woven Kenaf and Betel Palm (Areca catechu) Reinforced Unsaturated Polyester Composites

    Article • Polymer-Plastics Technology and Engineering, December 2008, Taylor & Francis

    Prof Mariatti M. Mariatti Jaafar

  147. Comparison of Reinforcing Efficiency between Recycled Newspaper (RNP)/Carbon Black (CB) and Recycled Newspaper (RNP)/Silica Hybrid Filled Polypropylene (PP)/Natural Rubber (NR) Composites

    Article • Journal of Reinforced Plastics and Composites, November 2008, SAGE Publications

    Prof Mariatti M. Mariatti Jaafar

  148. Prediction studies on percolation threshold behaviour of silver filled epoxy composite for electrically conductive adhesives applications

    Article • November 2008, Institute of Electrical & Electronics Engineers (IEEE)

    Prof Mariatti M. Mariatti Jaafar

  149. EthyleneVinyl Acetate/Natural Rubber/ Organoclay Nanocomposites: Effect of Sulfur and Peroxide Vulcanization

    Article • Journal of Reinforced Plastics and Composites, November 2008, SAGE Publications

    Prof Mariatti M. Mariatti Jaafar

  150. Effects of the filler loading and aging time on the mechanical and electrical conductivity properties of carbon black filled natural rubber

    Article • Journal of Applied Polymer Science, October 2008, Wiley

    Prof Mariatti M. Mariatti Jaafar

  151. Hybrid-filler filled polypropylene/(natural rubber) composites: Effects of natural weathering on mechanical and thermal properties and morphology

    Article • Journal of Vinyl and Additive Technology, September 2008, Wiley

    Prof Mariatti M. Mariatti Jaafar, Prof Hanafi H Ismail

  152. Effect of Chemical Surface Modifications on the Properties of Woven Banana-Reinforced Unsaturated Polyester Composites

    Article • Journal of Reinforced Plastics and Composites, July 2008, SAGE Publications

    Prof Mariatti M. Mariatti Jaafar

  153. Effects of Natural Weathering on Properties of Recycled Newspaper-filled Polypropylene (PP)/Natural Rubber (NR) Composites

    Article • Polymer-Plastics Technology and Engineering, June 2008, Taylor & Francis

    Prof Mariatti M. Mariatti Jaafar

  154. Effect of structural changes of silica filler on the coefficient of thermal expansion (CTE) of underfill encapsulant

    Article • Powder Technology, June 2008, Elsevier

    Prof Mariatti M. Mariatti Jaafar

  155. The effect of bagasse fibers obtained (from rind and pith component) on the properties of unsaturated polyester composites

    Article • Materials Letters, May 2008, Elsevier

    Prof Mariatti M. Mariatti Jaafar

  156. Properties of Banana and Pandanus Woven Fabric Reinforced Unsaturated Polyester Composites

    Article • Journal of Composite Materials, May 2008, SAGE Publications

    Prof Mariatti M. Mariatti Jaafar

  157. Effect of fiber surface treatment and fiber loading on the properties of bagasse fiber–reinforced unsaturated polyester composites

    Article • Composites Science and Technology, March 2008, Elsevier

    Prof Mariatti M. Mariatti Jaafar

  158. Effect of particle shape of silica mineral on the properties of epoxy composites

    Article • Composites Science and Technology, February 2008, Elsevier

    Prof Mariatti M. Mariatti Jaafar

  159. The Properties of Woven Betel Palm (Areca catechu) Reinforced Polyester Composites

    Article • Journal of Reinforced Plastics and Composites, January 2008, SAGE Publications

    Prof Mariatti M. Mariatti Jaafar

  160. Effect of Ethanol as Diluent on the Properties of Mineral Silica Filled Epoxy Composites

    Article • Journal of Composite Materials, January 2008, SAGE Publications

    Prof Mariatti M. Mariatti Jaafar

  161. The Effect of Recycled Newspaper Content and Size on the Properties of Polypropylene (PP)/Natural Rubber (NR) Composites

    Article • Polymer-Plastics Technology and Engineering, December 2007, Taylor & Francis

    Prof Mariatti M. Mariatti Jaafar

  162. Effect of curing agent on the properties of mineral silica filled epoxy composites

    Article • Polymer Composites, December 2007, Wiley

    Prof Mariatti M. Mariatti Jaafar

  163. Study on Tensile, Electrical, and Thermal Properties of Aluminium Particle Filled Natural Rubber (NR) and Ethylene-Propylene-Diene Terpolymer (EPDM) Composites

    Article • Polymer-Plastics Technology and Engineering, November 2007, Taylor & Francis

    Prof Mariatti M. Mariatti Jaafar

  164. Effect of silane-based coupling agent on the properties of silver nanoparticles filled epoxy composites

    Article • Composites Science and Technology, September 2007, Elsevier

    Prof Mariatti M. Mariatti Jaafar

  165. Properties of Aluminium and Zinc-Filled Natural Rubber Composites

    Article • Polymer-Plastics Technology and Engineering, June 2007, Taylor & Francis

    Prof Mariatti M. Mariatti Jaafar

  166. The properties of epoxy resin coated silica fillers composites

    Article • Materials Letters, May 2007, Elsevier

    Prof Mariatti M. Mariatti Jaafar

  167. High Filled Epoxy Composites for Electronic Packaging Application

    Article • November 2006, Institute of Electrical & Electronics Engineers (IEEE)

    Prof Mariatti M. Mariatti Jaafar

  168. Study on the Electrical Property of Silver (Ag) Nanoparticles Filled Epoxy Composites for the Application of Electrically Conductive Adhesives (ECAs) in Electronic Packaging

    Article • November 2006, Institute of Electrical & Electronics Engineers (IEEE)

    Prof Mariatti M. Mariatti Jaafar

  169. Effect of compatibilisers on mechanical and thermal properties of bentonite filled polypropylene composites

    Article • Polymer Degradation and Stability, August 2006, Elsevier

    Prof Mariatti M. Mariatti Jaafar

  170. Effect of Laminate Configuration on the Properties of Glass Fiber-reinforced Plastics (GFRPs) Mixed Composites

    Article • Journal of Reinforced Plastics and Composites, November 2005, SAGE Publications

    Prof Mariatti M. Mariatti Jaafar

  171. Effect of Resin:Fiber Ratio on the Properties of Glass Fiber Reinforced Plastic Composites

    Article • International Journal of Polymeric Materials, October 2005, Taylor & Francis

    Prof Mariatti M. Mariatti Jaafar

  172. Effect of Hole Drilling Techniques on Tensile Properties of Continuous Fiber Impregnated Thermoplastic (COFIT) Plain Weave Composites

    Article • Journal of Reinforced Plastics and Composites, July 2004, SAGE Publications

    Prof Mariatti M. Mariatti Jaafar

  173. Effect of Stacking Structure on the Properties of Satin Laminated Composites

    Article • Journal of Thermoplastic Composite Materials, July 2003, SAGE Publications

    Prof Mariatti M. Mariatti Jaafar

  174. Effect of Stacking Sequence on the Properties of Plain-Satin Hybrid Laminate Composites

    Article • Polymer-Plastics Technology and Engineering, January 2003, Taylor & Francis

    Prof Mariatti M. Mariatti Jaafar

  175. Effect of Prepreg Geometry on the Prepreg and Plain Weave Composite Properties

    Article • Journal of Reinforced Plastics and Composites, May 2002, SAGE Publications

    Prof Mariatti M. Mariatti Jaafar

  176. Determination of the influence of stacking structure, float length and pressure time on the flexural properties of satin laminated composite using a factorial design

    Article • Polymer Testing, January 2002, Elsevier

    Prof Mariatti M. Mariatti Jaafar

  177. The effects of hole locations and hole sizes on damaged behaviour of woven thermoplastic composites

    Article • Polymer Testing, October 2001, Elsevier

    Prof Mariatti M. Mariatti Jaafar

  178. The Flexural Behavior of Woven Prepreg Thermoplastic Composites

    Article • Journal of Thermoplastic Composite Materials, July 2001, SAGE Publications

    Prof Mariatti M. Mariatti Jaafar

  179. Effect of Samples Cutting Position and Gage Length or Specimen Geometry on the Mechanical Properties of Woven Thermoplastic Prepreg

    Article • International Journal of Polymeric Materials, May 2001, Taylor & Francis

    Prof Mariatti M. Mariatti Jaafar

  180. Effect of sample cutting direction on mechanical properties of woven thermoplastic prepreg

    Article • Polymer Testing, September 2000, Elsevier

    Prof Mariatti M. Mariatti Jaafar

  181. Influence of Types of Towpreg (Number of Tows and Matrices) in Woven Thermoplastic Composite Behavior-Part 1

    Article • International Journal of Polymeric Materials, September 2000, Taylor & Francis

    Prof Mariatti M. Mariatti Jaafar

  182. Influence of Different Woven Geometry and Ply Effect in Woven Thermoplastic Composite Behaviour-Part 2

    Article • International Journal of Polymeric Materials, September 2000, Taylor & Francis

    Prof Mariatti M. Mariatti Jaafar