All Stories

  1. Investigating the Inherent Characteristic/Performance Deterioration Interactions of Natural Fibers in Bio-Composites for Better Utilization of Resources

    Article • Journal of Polymers and the Environment, May 2017, Springer Science + Business Media

    Dr Faris M. AL-Oqla

  2. Investigating the mechanical performance deterioration of Mediterranean cellulosic cypress and pine/polyethylene composites

    Article • Cellulose, March 2017, Springer Science + Business Media

    Dr Faris M. AL-Oqla

  3. A Review of Rice Husk Bio-Based Composites

    Article • Current Organic Synthesis, February 2017, Bentham Science Publishers

    Dr Faris M. AL-Oqla

  4. Thisis a chapter in book talks and discusses the most important issues in natural fiber composites

    Article • January 2017, Elsevier

    Dr Faris M. AL-Oqla

  5. Introduction

    Article • January 2017, Elsevier

    Dr Faris M. AL-Oqla

  6. Materials selection

    Article • January 2017, Elsevier

    Dr Faris M. AL-Oqla

  7. Material selection of natural fiber composites

    Article • January 2017, Elsevier

    Dr Faris M. AL-Oqla

  8. Material selection of natural fiber composites using the analytical hierarchy process

    Article • January 2017, Elsevier

    Dr Faris M. AL-Oqla

  9. Material selection for composites

    Article • January 2017, Elsevier

    Dr Faris M. AL-Oqla

  10. Material selection of natural fiber composites using other methods

    Article • January 2017, Elsevier

    Dr Faris M. AL-Oqla

  11. Challenges in design of nanocellulose and its composites for different applications

    Article • January 2017, Elsevier

    Dr Faris M. AL-Oqla

  12. Predicting the potential of biomass-based composites for sustainable automotive industry using a decision-making model

    Article • January 2017, Elsevier

    Dr Faris M. AL-Oqla

  13. Design and Fabrication of Green Biocomposites

    Article • January 2017, Springer Science + Business Media

    Dr Faris M. AL-Oqla

  14. Predicting the Effect of Nano-Structural Parameters on the Elastic Properties of Carbon Nanotube-Polymeric based Composites

    Article • International Journal of Performability Engineering, January 2017, Totem Publisher, Inc.

    Dr Faris M. AL-Oqla

  15. Preface

    Article • January 2017, Elsevier

    Dr Faris M. AL-Oqla

  16. Sustainable Biocomposites: Challenges, Potential and Barriers for Development

    Article • November 2016, Springer Science + Business Media

    Dr Faris M. AL-Oqla

  17. Investigating morphological and performance deterioration of injection-molded rice husk–polypropylene composites due to various liquid uptakes

    Article • International Journal of Polymer Analysis and Characterization, June 2016, Taylor & Francis

    Dr Faris M. AL-Oqla

  18. Mechanical and morphological properties of injection-molded rice husk polypropylene composites

    Article • International Journal of Polymer Analysis and Characterization, February 2016, Taylor & Francis

    Dr Faris M. AL-Oqla

  19. Natural fiber reinforced conductive polymer composites as functional materials: A review

    Article • Synthetic Metals, August 2015, Elsevier

    Dr Faris M. AL-Oqla, Dr Mohammad Jawaid

  20. Polymer Selection Approach for Commonly and Uncommonly Used Natural Fibers Under Uncertainty Environments

    Article • JOM, July 2015, Springer Science + Business Media

    Dr Faris M. AL-Oqla

  21. Predicting the potential of agro waste fibers for sustainable automotive industry using a decision making model

    Article • Computers and Electronics in Agriculture, April 2015, Elsevier

    Dr Faris M. AL-Oqla

  22. Green composites

    Article • Journal of Composite Materials, March 2015, SAGE Publications

    Dr Faris M. AL-Oqla

  23. A Model for Evaluating and Determining the Most Appropriate Polymer Matrix Type for Natural Fiber Composites

    Article • International Journal of Polymer Analysis and Characterization, February 2015, Taylor & Francis

    Professor S.M. Sapuan, Dr Faris M. AL-Oqla

  24. Selecting Natural Fibers for Bio-Based Materials with Conflicting Criteria

    Article • American Journal of Applied Sciences, January 2015, Science Publications

    Dr Faris M. AL-Oqla

  25. Decision making model for optimal reinforcement condition of natural fiber composites

    Article • Fibers and Polymers, January 2015, Springer Science + Business Media

    Dr Faris M. AL-Oqla

  26. A Novel Evaluation Tool for Enhancing the Selection of Natural Fibers for Polymeric Composites Based on Fiber Moisture Content Criterion

    Article • BioResources, November 2014, BioResources

    Professor S.M. Sapuan, Dr Faris M. AL-Oqla

  27. An expert-based model for selecting the most suitable substrate material type for antenna circuits

    Article • International Journal of Electronics, September 2014, Taylor & Francis

    Dr Faris M. AL-Oqla

  28. Combined Multi-criteria Evaluation Stage Technique as an Agro Waste Evaluation Indicator for Polymeric Composites: Date Palm Fibers as a Case Study

    Article • BioResources, June 2014, BioResources

    Professor S.M. Sapuan, Dr Faris M. AL-Oqla

  29. Natural fiber reinforced polymer composites in industrial applications: feasibility of date palm fibers for sustainable automotive industry

    Article • Journal of Cleaner Production, March 2014, Elsevier

    Professor S.M. Sapuan, Dr Faris M. AL-Oqla

  30. Selecting the most appropriate corrective actions for energy saving in existing buildings A/C in hot arid regions

    Article • Building Simulation, January 2014, Tsinghua University Press

    Dr Faris M. AL-Oqla

  31. Processing and Properties of Date Palm Fibers and Its Composites

    Article • January 2014, Springer Science + Business Media

    Professor S.M. Sapuan, Dr Faris M. AL-Oqla, Dr Mohammad Jawaid

  32. Mechanical properties of soil buried kenaf fibre reinforced thermoplastic polyurethane composites

    Article • Materials & Design (1980-2015), September 2013, Elsevier

    Professor S.M. Sapuan, Dr Faris M. AL-Oqla

  33. A DECISION-MAKING MODEL FOR SELECTING THE GSM MOBILE PHONE ANTENNA IN THE DESIGN PHASE TO INCREASE OVER ALL PERFORMANCE

    Article • Progress In Electromagnetics Research C, January 2012, EMW Publishing

    Dr Faris M. AL-Oqla

  34. Reductions of pendulations of overhead cranes under the effect of air resistance by a cable manipulation manner

    Article • May 2008, Institute of Electrical & Electronics Engineers (IEEE)

    Dr Faris M. AL-Oqla

  35. Material selection using analytical hierarchy process

    Article • International Journal of Computer Applications in Technology, January 2006, Inderscience Publishers

    Dr Faris M. AL-Oqla