All Stories

  1. Optimization and characterization of wood decay mushroom Ganoderma adspersum extract: A comparison between response surface methodology and artificial neural network-ant lion algorithm
  2. Preliminary study of Acacia dealbata logs for use in construction: Visual characterization and non-destructive testing
  3. Production of value-added decorative furniture items from recoverable wood wastes from construction site
  4. Estudio comparativo de productos de madera laminada unidos con distintos tipos de clavijas
  5. Glulam bonding quality of chromated copper arsenate treatment applied to Pinus elliottii wood and three structural adhesives
  6. Construction and performance of a 1:2 scale timber structure under standardized load tests
  7. Use of Eucalyptus urophylla waste as raw material in composite particleboards
  8. Physical and mechanical aging of wood-plastic composites. Non-destructive methods for quality control
  9. Surface quality of planed tangential and radial sections of thermally modified Silver fir wood
  10. Efecto del rectificado de cuchillas sobre la calidad superficial de madera cepillada de Pino radiata
  11. Efficiency analysis of the Chilean sawmill industry
  12. Some physical and mechanical properties of particle boards produced from industrial wood chips and Scots pine (Pinus sylvestris) cones
  13. Mineralization of chemically treated sawdust and its use as aggregates in fly ash-based geopolymer composites
  14. Physical, mechanical, and combustion properties of twelve wood species from the Brazilian Amazon
  15. Radial variation of fiber morphology and wood density of the commercial species Drypetes sp. and Myroxylon balsamum
  16. Estudio de la mejora de aislamiento a ruido de impacto de soluciones constructivas mixtas CLT / hormigón + neumático fuera de uso en probetas de tamaño reducido
  17. The effect of cutting direction and water based varnish type on sound absorption coefficient in some native wood species
  18. Antifungal and antitermitic potential of extracts of industrial wood waste from Central Amazon, Brazil
  19. Evaluation of wood coating performance and volatile organic compounds
  20. Effect of the heat treatment on the physicochemical characteristics of rubberwood: Results of thermal analysis and FTIR spectroscopy
  21. Cement-bonded wood panels filled with duroplast sanitary ware wastes
  22. Thermal modification of fast-growing Firmiana simplex wood using tin alloy: Evaluation of physical and mechanical properties
  23. Some physical and mechanical properties of particle boards produced with hazelnut husk and astragalus (Astragalus membranaceus) plant
  24. The effects of thermal aging on color and glossiness in UV cured coatings applied to sessile oak
  25. Variation in specific gravity and shrinkage of tapped rubberwood
  26. Experimental and numerical study on mounting force and withdrawal strength of self-threaded dowels in particleboard
  27. The wide variation of amazonian stocked hardwoods affecting natural resistance to arboreal termites over time
  28. Efecto del aprovechamiento forestal en la formación de madera en árboles remanentes de Abies religiosa
  29. Machine learning para predecir la calidad del secado de chapas en la industria de tableros contrachapados de Pinus radiata
  30. Wood colorimetry of Lauraceae species native to Brazil
  31. Toxicity and repellency of chlorpyrifos nanocapsules against subterranean termite Coptotermes curvignathus
  32. Alterations to the bending mechanical properties of Pinus sylvestris timber according to flatwise and edgewise directions and knot position in the cross-section
  33. Surface changes in wood submitted to thermomechanical densification
  34. Utilization of nanotalc modified adhesives in plywood panels
  35. The influence of road traffic and industrial plant-induced air pollution on the physical, mechanical, chemical and morphological properties of the black pine wood
  36. Assessing the effectiveness of static heuristics for scheduling lumber orders in the sawmilling production process
  37. Contribution of extractives to the bark color of Caesalpinia sappan
  38. Influence of rice straw and wood fiber combination on physical and mechanical properties of rice straw pulverized composite board
  39. Biological resistance of thermally modified Gmelina arborea wood
  40. Fire performance of Pinus taeda wood treated with zinc borate before and after leaching
  41. Determinación de la edad de transición de madera juvenil a madura y de sus valores elasto-resistentes en Pinus contorta
  42. Relationship between acoustic wave velocity and mechanical properties in Acacia mangium wood
  43. Evaluation of OSB panels using residual wood with low contents of castor oil polyurethane resin
  44. Anatomy based papermaking potential of some woody plants under different ecological conditions
  45. The effect of adding graphene oxide to urea formaldehyde resin and its efficacy on three layered particleboard
  46. Usability of fractometer for the purpose of a practical preliminary assessment tool for wood density of Pinus brutia
  47. Characterization of nanocellulose/pyrolysis oil nanocomposite films
  48. Radial compression strength can predict the hydraulic vulnerability of mature Norway spruce sapwood
  49. Total phenolics, tannin contents, antioxidant properties, protein and sensory analysis of Pleurotus ostreatus, Pleurotus citrinopileatus and Pleurotus djamor cultivated on different sawdusts
  50. Improvement of gluing parameters in Edge Glued Panels
  51. Densidad y proporción de albura y duramen en nuevos clones de Eucalyptus spp
  52. Effects of thermal treatment and weathering in the resistance against termites of a fast-growing pine wood
  53. Time-moisture superposition principle in creep behavior of white oak with various earlywood vessel locations
  54. Investigation of wood properties and resistance of 25-year-old Gmelina arborea wood selected from crown region to termite attack
  55. Mechanical characterization of visually graded boards from turkish fir and black pine by nondestructive and destructive tests
  56. Some physical and mechanical properties of Laminated Veneer Lumber reinforced with glass fiber mesh
  57. Biosorption of methylene blue and malachite green from single and binary solutions by Pinus pinaster bark
  58. Gluing characteristics of Papua New Guinea timber species for various non-structural applications
  59. Performance of visible and Near-infrared spectroscopy to predict the energetic properties of wood
  60. Fotogrametría SfM de bajo costo para monitorización de ensayos sobre estructuras laminares reticulares de madera deformadas elásticamente a escala real
  61. Influence of pretreatment on properties of bamboo portland cement particle board
  62. Evaluation of the mechanical performance of chairs without fasteners constructed of wood–based panels
  63. Spruce chips stabilization in wood-cement materials: Effect of matrix composition
  64. Assessment of cellulose nanofibers from bolaina blanca wood obtained at three shaft heights
  65. Influence of thermal pretreatments on dimensional change and humidity sensitivity of densified spruce and poplar wood
  66. Thinning wood properties of Nothofagus alpina under three different silvicultural conditions
  67. Quality of Tectona grandis for sawn wood production
  68. Physical, mechanical, and thermal characteristics of alkaline copper quaternary impregnated oriental beech wood
  69. El bambú Tonkin (Pseudosasa amabilis) como material a explorar en el Ecodiseño. El diseño de un puesto de mercado como caso de estudio
  70. Comportamiento mecánico de muros de corte de Eucalyptus grandis: Resultados experimentales versus el criterio de las normas europeas
  71. Cross laminated timber bonding quality for different brazilian species and pressing levels
  72. Evaluation of bean residues in the production of agglomerated panels
  73. Cellulose biosaccharification by Irpex lacteus wood decay fungus
  74. Water absorption, thickness swelling and mechanical properties of cement bonded wood composite treated with water repellent
  75. Research of computerized numerical control laser processing qualities of some wood species used ın the furniture industry
  76. Artificial intelligence to growth stresses predicting in Eucalyptus clones using dendrometric variables and wood density
  77. Effects of artificial weathering on the surface properties of coated radiata pine
  78. Wood quality of ten clonal progenies of rubber tree as raw material for bioenergy
  79. Determination of processing characteristics of wood materials densified by compressing
  80. Effect of ultra-low temperature on some mechanical properties of painted and film-coated plywood
  81. The effect of sanding on the wettability and surface quality of Imbuia, Red oak and Pine wood veneers
  82. Physical and anatomical properties of Hevea brasiliensis clones
  83. Comparing the structure of spruce wood biodegraded by Trametes versicolor and Gloeophyllum trabeum and further utilization of this material
  84. Sampling sufficiency for mechanical properties of wood
  85. VOCs and PM listing of Eucalyptus globulus combustion in residential wood stoves
  86. Variations in decay resistance of Cryptomeria fortunei
  87. Particleboard experimental production with bamboo, pine and mate for one product of new applications
  88. Effect of natural aging on selected properties of wooden facade elements made of scots pine and chestnut
  89. Effect of chip temperature during bonding on particleboard properties
  90. Mechanical behaviour of grapevine wood affected by Xylotrechus arvicola
  91. Characterisation of lignins isolated from Bamboo organosolv and kraft black liquor
  92. Quality characteristics of the selected variant of Paulownia tomentosa (Robust4) wood cultivated in Hungary
  93. Modelling the influence of radiata pine log variables on structural lumber production
  94. Influence of the multiday and continuous hot press on the physical, mechanical and formaldehyde emission properties of the particleboard
  95. Effects of glue spreading rate and veneer density on sugi (Cryptomeria japonica) plywood adhesive penetration
  96. Estimation of above ground biomass and carbon of Pinus caribaea in Bulolo forest plantation, Papua New Guinea
  97. Effect of heat treatment on physical, mechanical and chemical properties of angelim wood
  98. Physical-mechanical properties and heat transfer analysis of OSB produced with phenol-formaldehyde and ZnO nanoparticles addition
  99. Influence of soil physicochemical properties on biometrical and physical features of persian oak wood
  100. Experimental study on full-scale glulam beams manufactured with Eucalyptus urograndis
  101. Effect of microwave treatment on drying and water impregnability of Pinus pinaster and Eucalyptus globulus
  102. Chemical constituents of palm wastes slow pyrolysis derived vinegar
  103. Comparison of thermal performances of plywood shear walls produced with different thermal insulation materials
  104. Carbon footprint of wooden and plastic pallets: A quantification with different software tools
  105. Performance of cement-bonded wood particleboards produced using fly ash and spruce planer shavings
  106. Caracterización morfológica de las traqueidas de pino híbrido de rápido crecimiento
  107. Prediction of surface roughness of CO2 laser modified poplar wood via response surface methodology
  108. Exploratory studies on effects of growth location and conditioning on treatability and permeability of southern pine lumber
  109. Investigations on the sorption behaviour of selected wood species from Cameroon
  110. Chemical variations in tension wood of poplar tree induced by intermittent bending, fertilizer and hormone treatments
  111. Antifungal and larvicidal effects of wood vinegar on wood-destroying fungi and insects
  112. Predictive expressions for withdrawal force capacity of various size of dowels from particleboard and medium density fiberboard
  113. Evaluation of mycelium composite materials produced by five Patagonian fungal species
  114. Effect of borax-boric acid and ammonium polyphosphate on flame retardancy of natural fiber polyethylene composites
  115. Shear strength and hardness of two tropical wood species as function of heat treatment
  116. Properties of gypsum particleboard with added mineral dolomite
  117. Formaldehyde free tannin-based adhesive with epoxy as hardener for plywood
  118. Colorimetría y densitometría en madera de Guazuma crinita
  119. Weight-strength optimization of wooden household chairs based on member section size
  120. Wettability and decay of particleboards manufactured with thermally treated sugarcane residue and bamboo (Dendrocalamus asper) particles
  121. The effects of bioincising by Physisporinus vitreus on cuo retention and copper element leaching in oriental spruce wood
  122. Evolución del color y de la aparición de defectos en la madera de Eucalyptus globulus expuesta a intemperismo natural
  123. Combining artificial neural network and moth-flame optimization algorithm for optimization of ultrasound-assisted and microwave-assisted extraction parameters: Bark of Pinus brutia
  124. Mechanical and fire properties of oriental beech impregnated with fire-retardants and coated with polyurea/polyurethane hybrid and epoxy resins
  125. Changes in the content and composition of the extractives in thermally modified tropical hardwoods
  126. Application of a strain gauge to assess drying stresses in normal and tension wood of Corymbia citriodora
  127. Evaluation and comparison of control and heat treated L-shape furniture joints produced from Scotch pine and ash wood under static bending and cyclic fatigue bending loadings
  128. Influence of growth parameters on wood density of Acacia auriculiformis
  129. Effect of the thermal treatment on the chemical components, sorption, and shrinkage properties of Tectona grandis juvenile wood
  130. Comparative study on weathering durability property of phenol formaldehyde resin modified sweetgum and southern pine specimens
  131. Applying colorimetry for wood differentiation of fabaceae species grown in southern Brazil
  132. Mechanical, thermal, and morphological behaviour studies on coconut shell and palm kernel filler biocomposite
  133. Particle image velocimetry technique and ultrasound method to obtain the modulus of elasticity of Bertholletia excelsa wood
  134. Effectiveness of European oak wood staining with iron (II) sulphate during natural weathering
  135. Preparation of plywood panels using waste milk pouches as an adhesive
  136. Evaluación de impactos ambientales de viviendas en madera: El caso de “La casa Uruguaya”
  137. Physical properties of palmyra palm wood for sustainable utilization as a structural material
  138. Physical, chemical and mechanical characterization of Acrocarpus fraxinifolius cultivated in Sao Paulo
  139. An evaluation of clove (Eugenia caryophyllata) essential oil as a potential alternative antifungal wood protection system for cultural heritage conservation
  140. Plywoods of northeast Argentinian woods and soybean protein-based adhesives: Relationship between morphological aspects of veneers and shear strength values
  141. A novel method for producing a glulam from the wood of peeler cores
  142. Simultaneous treatment with oil heat and densification on physical properties of Populus × Canadensis wood
  143. Fumigation of imported Tectona grandis and southern yellow pine with Pongamia pinnata seed oil against sapstain and mould
  144. Some surface characteristics of oriental beech wood impregnated with some fire-retardants and coated wıth polyurea/polyurethane hybrid and epoxy resins
  145. Optimization of CNC operating parameters to minimize surface roughness of Pinus sylvestris using integrated artificial neural network and genetic algorithm
  146. Mass transfer properties of Acacia mangium plantation woodt
  147. Comparison of some wood properties of juvenile black pines of different origin planted in the same habitat
  148. Automatic identification of charcoal origin based on deep learning
  149. Efecto en las propiedades mecánicas de una resina pinífera modificada biodegradable, al utilizarla como compatibilizante o acoplante en formulaciones elastoméricas sin o con fibra de agave y hule de poli(estireno-butadieno). Un paso hacia la formulació...
  150. Particle image velocimetry technique for analysis of retractibility in woods of Pinus elliottii
  151. Experimental and numerical study on a novel bamboo joint for furniture considering effect of loading type on mechanical parameters used in finite element method
  152. Determination of the strength performance of table frames
  153. Comparative performance of Polymeric Xylenol Tetrasulfide versus creosote in an AWPA E7 field stake test
  154. Decay capabilities of basidiomycetes colonizing air-seasoning red oak and blackgum railroad ties
  155. Biochemical features of organic extractives from Eucalyptus and Corymbia woods using ethanol as a solvent
  156. Compressive strength parallel to grain of earlywood and latewood of yellow pine
  157. Vigas de pino resinoso del noreste de Argentina bajo cargas de larga duración: Deformaciones, recuperación y criterios de diseño
  158. Glulam connections assembled with screws in different installation angles
  159. Influences of different drying climates on Eucalyptus camaldulensis wood properties
  160. Theoretical model for further development of intumescent substances to remediate smoldering in wood fiber insulation panels
  161. Comparative analysis of the physical and mechanical properties of kraft paper and watercolor paper
  162. Preparation and performance of tannin-glyoxal-urea resin-bonded grinding wheel loaded with SiO2 reinforcing particles
  163. Biologically synthesised copper oxide and zinc oxide nanoparticle formulation as an environmentally friendly wood protectant for the management of wood borer, Lyctus africanus
  164. Kinetic analysis of thermal degradation of Cedrela odorata, Marmaroxylon racemosum and Tectona grandis from timber industry
  165. Influence of silicone oil thermal modification on mechanical properties of Masson pine wood
  166. Efficient utilization of corn stalk and poplar planer shavings in manufacturing particleboard
  167. Bending moment resistance of t-type joints reinforced with basalt and glass woven fabric materials
  168. Relationship between vessel parameters and cleavage associated with checking in Eucalyptus grandis wood
  169. Effects of hot-cold oil treatment on biological resistance and physical properties of Brutia pine sapwood
  170. Bonding quality of two lesser-used wood species Brachystegia spiciformis and Julbernardia globiflora from Mozambique
  171. Influence of harvest region on properties of Cambará wood
  172. Use of Eucalyptus grandis clones treated with a water repellent to improve the dimensional stability of utility poles
  173. Tio2-modified Pinus elliottii: A pine wood presenting increased resistance to water and ultraviolet radiation
  174. Synergistic influence of flame retardant additives and citric acid on the functional properties of rice husk/wood blended particleboards
  175. Crystallinity and impact strength improvement of wood-polylactic acid biocomposites produced by rotational and compression molding
  176. Combined effects of neem (Azadirachta indica) and sesame (Sesamum indicum) oil as a wood preservative on subterranean termites in the field
  177. Influence of initial wood moisture on decay process by two brown-rot fungi
  178. Characterizations of tree-decay fungi by molecular and morphological investigationsin aniranian alamdardeh forest
  179. Shear and adhesion strength of open and closed system heat-treated wood samples
  180. Weathering characteristics of impregnated and coated Calabrian pine wood
  181. Evaluation of wetting, structural and thermal properties of electrospun nanofibers at different pineapple leaf fiber / polyethylene terephthalate ratios
  182. Evaluation of Eucalyptus woodchip utilization as fuel for thermal power plants
  183. The use of borax pentahydrate of inorganic filler in medium density fiberboard production
  184. Evaluation of the properties of hybrid yellow poplar (Liriodendron sino-americanum): A comparison study with yellow poplar (Liriodendron tulipifera)
  185. Natural weathering performance of thermally treated poplar and black pine wood
  186. Quantitative evaluation of microwave irradiation on short-rotation plantation wood species
  187. Phenolics content and antioxidant activity of wood extractives from three clones of Acacia hybrid (Acacia mangium × Acacia auriculiformis)
  188. Elastic constants of Chilean Pinus radiata using ultrasound
  189. Effects of microcrystalline cellulose on some performance properties of chitosan aerogels
  190. Tiempo de esterilización mediante vapor de la madera aserrada de Pino radiata
  191. Estimation of density, moisture content and strength properties of Tectona grandis wood using Near Infrared Spectroscopy
  192. Structural analyses of wooden chairs by finite element method (FEM) and assessment of the cyclic loading performance in comparison with allowable design loads
  193. Changes in wood properties of chestnut wood structural elements with natural aging
  194. Juvenile-mature wood evaluation along the bole considering the influence of silvicultural treatments
  195. Properties of biomass obtained from short-rotation Inger willow clone grown on a contaminated and non-contaminated land
  196. Evaluación de la eficiencia energética de un proceso continuo de tratamiento de residuos agroforestales mediante carbonización hidrotérmica
  197. Flooring characteristics of thermo-mechanical densified wood from three hardwood tropical species in Costa Rica
  198. Physical and mechanical properties of wood from invasive tree species
  199. Evaluation of wood-based coating performance for ultraviolet roller and conventional air-atomization processes
  200. Status of production, distribution and determinants of biomass briquette acceptability in Kampala City, Uganda
  201. Chemical variation of five natural extracts by non-polar solvent
  202. Thermal properties of Acacia mangium Cross Laminated Timber and its gluelines bonded with two structural adhesives
  203. Energy gains of Eucalyptus by torrefaction process
  204. Viability of wood decaying fungal mycelium after microwave radiation of bamboo culm
  205. Nanocellulose-reinforced phenol-formaldehyde resin for plywood panel production
  206. A new method for determining air permeabilities of wood-based panels
  207. Radial variation in cell morphology of Melia azedarach planted in northern Vietnam
  208. Colorimetría de los tallos del bambú (Guadua angustifolia) en tres estados de madurez
  209. Shear strength in friction welded joint of poplar wood impregnated with copper-based wood preservative
  210. Properties of thermally modified teakwood
  211. Assessment of physical and mechanical properties of Papua New Guinea timber species
  212. The chemical and morphological properties of oleaster
  213. Characterization of the wood properties of Cedrelinga cateniformis as substitute for timbers used for window manufacturing and outdoor applications
  214. Carbon fiber-reinforced polymers as a tensile reinforcement of the Pinus elliotti and Manilkara huberi wood species
  215. Effect of applying finishing products and sanding on the surface of marupa wood
  216. The influence of ultraviolet radiation on the colour of thermo-mechanically modified beech and oak wood
  217. Mechanical behavior of dowel connection for timber-concrete composite rural bridges
  218. Effect of press temperature on some properties of cement bonded particleboard
  219. Aprovechamiento integral de Eucalyptus globulus en un esquema de biorrefinería en doble etapa
  220. Evaluation of different plant derived oils as wood preservatives against subterranean termite Odontotermes obesus
  221. Nondestructive testing used on timber in Spain: A literature review
  222. Thermochemical behavior of Eucalyptus grandis wood exposed to termite attack
  223. Failure under stress of grapevine wood: The effects of the cerambycid Xylotrechus arvicola on the biomechanics properties of Vitis vinifera
  224. Possibility of using lichen and mistletoe extracts as potential natural wood preservative
  225. Use of nearest neighbors (k-NN) algorithm in tool condition identification in the case of drilling in melamine faced particleboard
  226. The properties of particles produced from waste plywood by shredding in a single-shaft shredder
  227. Evaluation of the variability of compressive strength parallel to the fibers of hardwood species
  228. Incidencia de la impregnación de madera con alcohol polivinilico y polietilenglicol en algunas propiedades físicas y mecánicas de Pino oocarpa
  229. Anti-fungal and anti-termite activity of extractives compounds from thermally modified ash woods
  230. Effect of thermal treatment variables on the thermogravimetric properties of eucalypt wood
  231. Efficacy of alternative copper-based preservatives in protecting decking from biodegradation
  232. Evaluation of the calorific values of wastes from some tropical wood species
  233. Alternative model to determine the characteristic strength value of wood in the compression parallel to the grain
  234. Estimation of moisture in wood chips by Near Infrared Spectroscopy
  235. Dimensional stability and colour responses of Pinus elliottii wood subjected to furfurylation treatments
  236. Lightweight tubular fiberboard: Effect of hole diameters and number on panel properties
  237. Changes in colour and mechanical properties of wood polypropylene composites on natural weathering
  238. Liquid water absorption in coated Norway spruce: Impact of heartwood, sapwood, density and weather exposure
  239. Simulador de propiedades termodinámicas en la conversión de la biomasa forestal de aserrín de pino
  240. Photostability of acetylated wood coated with nano zinc oxide
  241. Effects of factors on direct screw withdrawal resistance in medium density fiberboard and particleboard
  242. Water flow in different directions in Corymbia citriodora wood
  243. Measuring and estimating shear force of one stapled and one-row multi stapled wood joints
  244. Influence of nano wollastonite on physical, mechanical and morphological properties of gypsum composites manufactured from bagasse
  245. Dynamic and static mechanical properties of Eucalyptus nitens thermally modified in an open and closed reactor system
  246. Thermal degradation of oriental beech wood impregnated with different inorganic salts
  247. Process layout planning and optimised product range selection in manufacture of wooden construction sets
  248. Surface properties of novel wood-based reinforced composites manufactured from crushed veneers and phenolic resins
  249. Machining properties of Melia dubia wood
  250. Characterization of thermally modified short and long rotation teaks and the effects on coatings performance
  251. Biological resistance of heat-treated wood of Pinus caribaea and Eucalyptus saligna
  252. Assessing the natural durability of different tropical timbers in soil-bed tests
  253. Fibre morphological variations of some Nigerian guinea savannah timber species
  254. Scaling and modeling the creep of Eucalyptus globulus
  255. Timber grading of Pinus uncinata , a lesser known pine species from the pyrenean mountain range
  256. Evaluation of the strength, sorption and thermal properties of bamboo plastic composites
  257. Study on compressive stress relaxation behavior of beech based on the finite element method
  258. Investigation of some surface properties and thermogravimetric analysis of veneer sheets treated with fire retardants
  259. Relationship between the dynamic and static modulus of elasticity in standing trees and sawn lumbers of Paulownia fortune planted in Iran
  260. An experimental and numerical study of moisture transport and moisture-induced strain in fast-grown Sitka spruce
  261. Carbon stored by furnishing wood-based products: An Italian case study
  262. Effects of saturated vapor pre-steaming on drying strain in Asian White Birch: Experimentation and modelling
  263. Specific gas permeability of normal and nanosilver-impregnated solid wood species as influenced by heat-treatment
  264. Effectiveness of copper chrome arsenate and used engine oil in protecting fencing posts of Ugandan grown eucalypt clone GC550 and Phoenix reclinata against termite attack
  265. Application of paints to decrease air permeability of oriented strand boards
  266. Effect of adhesive quantity on selected physico-mechanical properties of Bamboo glulam
  267. Stability of planed and precision planed solid wood surfaces due to wetting
  268. Cristalinidad de microfibras de celulosa obtenidas de Cistus ladanifer y Erica arborea
  269. Characterization of pacific silver fir impregnated with extractives from western redcedar
  270. Energy valorization of woody biomass by torrefaction treatment: A Brazilian experimental study
  271. Analysis of wood products from an added value perspective: The Uruguayan forestry case
  272. Layer thickness performances of coatings on MDF: Polyurethane and cellulosic paints
  273. Relación entre parámetros de producción y propiedades estructurales de madera laminada encolada de Eucalyptus grandis
  274. Effect of brown rot degradation on mass loss and compressive strength of Chinese poplar (Populus simonii)
  275. A new approach to wood protection: Preliminary study of biologically synthesized copper oxide nanoparticle formulation as an environmental friendly wood protectant against decay fungi and termites
  276. Bio-coal production with agroforestry biomasses in Brazil
  277. Application of resource efficient and cleaner production through best management practice in a pallet manufacturer sawmill located in the city of Puyo-Ecuador
  278. Evaluation of degradation in chemical compounds of wood in historical buildings using FT-IR and FT-Raman vibrational spectroscopy
  279. Colorimetría en la madera de Prosopis alba
  280. Decay resistance of scotch pine wood impregnated with Agaricus campestris bio-protective extract
  281. Variación del contenido de humedad verde y de la densidad básica de la madera en árboles de Eucalyptus nitens con dimensiones aserrables
  282. Evaluation of dimensional stability, surface roughness, colour, flexural properties and decay resistance of thermally modified Acacia auriculiformis
  283. Resistance improvement of rubberwood treated with zinc oxide nanoparticles and phenolic resin against white-rot fungi, Pycnoporus sanguineus
  284. Evaluation of wood surface coating performance using water based, solvent based and powder coating
  285. Influence of combined heat treatment and densification on mechanical properties of poplar wood
  286. Optimization of wood machining parameters in CNC routers: Taguchi orthogonal array based simulated angling algorithm
  287. The quality comparison of particleboards produced from heartwood and sapwood of European larch
  288. Physicochemical properties of Pinus massoniana wood subjected to silicone oil heat treatment
  289. Energy efficiency performance enhancement of industrial conventional wood drying kiln by adding forced ventilation and waste heat recovery system: A comparative study
  290. Investigation of an alternative testing protocol to determine the shear strength of bamboo parallel to the grain
  291. Recommendation of non-destructive sampling method for density estimation of the Eucalyptus wood
  292. Mechanical characteristics of impregnated white Jabon wood ( Anthocephalus cadamba ) using merbau extractives and selected polymerised merbau extractives
  293. Fractionation of Pinus radiata wood by combination of steam explosion and organosolv delignification
  294. Assessment of physical, mechanical, and biological properties of bamboo plastic composite made with polylactic acid
  295. Effects of wood flour on the mechanical, thermal and morphological properties of poly (L-lactic acid)-chitosan biopolymer composites
  296. Selection of superior clones of Corymbia hybrids based on wood and charcoal properties
  297. Kraft scrap paper pulp as a substitute of wood chips in manufacture of particleboards resinated with hybrid pf/pmdi resin
  298. Surface roughness of thin wood veneers sliced from laminated green wood lumber
  299. Effect of nanoclay-treated UF resin on the physical and mechanical properties of plywood manufactured with wood from tropical fast growth plantations
  300. Monitoring the cell wall characteristics of degraded beech wood by white-rot fungi: Anatomical, chemical, and photochemical study
  301. Examining the efficiency of mechanic/enzymatic pretreatments in micro/nanofibrillated cellulose production
  302. Effect of pole size on preservative penetration and retention in air-dried ugandan grown eucalypt utility poles
  303. Colour changes and morphological performance of impregnated jabon wood using polymerised merbau extractives
  304. Parquet multicapa de Eucalyptus globulus y Quercus robur . resistencia al impacto para diversas tipologías de fabricación
  305. Influence of combined hygro-thermo-mechanical treatment on technical characteristics of poplar wood
  306. Comparison of two kiln-drying schedules for turkish hazel ( Corylus colurna ) lumber of 5-cm thickness
  307. Particularities of hollow-core briquettes obtained out of spruce and oak wooden waste
  308. Efecto del ataque de Leptocybe invasa en plantaciones de eucalipto destinadas a la producción de pulpa de celulosa kraft
  309. An exploratory evaluation of the pulpability of Brachystegia spiciformis and Pericopsis angolensis from the angolan miombo woodlands
  310. Discrimination of wood and charcoal from six Caatinga species by near-infrared spectroscopy
  311. Liquefaction behaviour of twelve tropical hardwood species in phenol
  312. Estudio de cinética en procesos termogravimétricos de materiales lignocelulósicos
  313. Microstructural characterization and evaluation of certain important physical properties of thuja burl wood
  314. Wettability of the surface of heat-treated juvenile teak wood assessed by drop shape analyzer
  315. Ten-year field study of wood plastic composites in Santiago, Chile: biological, mechanical and physical property performance
  316. Mechanical parameters of thermally modified ash wood determined on compression in tangential direction
  317. Production of blockboard from small athel slats end-glued by different type of joint
  318. Modelos descriptivos de distribución de madera juvenil y madura en Robinia pseudoacacia
  319. Using artificial neural networks in estimating wood resistance
  320. Chemical characterization, hardness and termite resistance of Quercus cerris heartwood from Kosovo
  321. Chemical composition and termiticidal activity of Khaya ivorensis stem bark extracts on woods
  322. Plant essential oils for environment-friendly protection of wood objects against fungi
  323. Artificial neural networks to estimate the physical-mechanical properties of amazon second cutting cycle wood
  324. Veinte años después: Enfocados en las Ciencias de la Madera
  325. Prediction of microfibril angle for Eucalyptus microcorys wood by fiber length and basic density
  326. Calentamiento por radiofrecuencia para esterilizar Pinus radiata como material para embalajes. Parte 1: Tiempo total de tratamiento
  327. Influence of coupling agents on rheological, thermal expansion and morphological properties of recycled poypropylene wood flour composites
  328. Influence of relative humidity and temperature on cultivation of Pleurotus species
  329. Evaluation of palm fiber components an alternative biomass wastes for medium density fiberboard manufacturing
  330. Determinación inversa de la conductividad térmica en madera de Pinus radiata
  331. Microwave-assisted solvothermal: An efficient and new method to obtain hydrophobic wood surfaces
  332. Potential use of nir and visible spectroscopy to analyze chemical properties of thermally treated wood
  333. Determinantes de la satisfacción laboral en la industria de la madera y el papel: estudio en españa y hallazgos en otros países
  334. Colour responses of Eucalyptus grandis wood to the Brazilian process of thermal modification
  335. Recycling wood waste from construction and demolition to produce particleboards
  336. A modeling study to evaluate the quality of wood surface
  337. Encapsulation of precipitated calcium carbonate fillers using carboxymethyl cellulose /polyaluminium chloride: preparation and its influence on mechanical and optical properties of paper
  338. Effect of the Brazilian process of thermal modification on the physical properties of Eucalyptus grandis juvenile wood
  339. Analysis of biological pretreatment of rapeseed straw with white rot fungi for enzymatic hydrolysis
  340. Infrared spectroscopy of the surface of thermally-modified teak juvenile wood
  341. Asbestos-free autoclaved wood fiber-cement sheets from recycled old corrugated containers and kraft pulp of Douglas fir: properties and scanning electron microscopy
  342. Recovery of phenolic compounds from Eucalyptus wood wastes using ethanol-salt-based aqueous two-phase systems
  343. Dimensional stabilization of wood by chemical modification using isopropenyl acetate
  344. Color and gloss evaluation in decorative stain applied to cases of Pinus radiata wood treated with copper azole micronized Type C
  345. Effect of torrefaction temperature on properties of Patula pine
  346. The bending and tension strength of furniture joints bonded with polyvinyl acetate nanocomposites
  347. Assessment of the thermal behavior of lignins from softwood and hardwood species
  348. Insect damaged wood as a source of reinforcing filler for thermoplastic composites
  349. Bondability of Black locust (Robinia pseudoacacia) and Beech wood (Fagus sylvatica) with polyvinyl acetate and polyurethane adhesives
  350. Modeling and simulation of an industrial indirect solar dryer for Iroko wood (Chlorophora excelsa) in a tropical environment
  351. Effects of adhesive and loading directions on the load-carrying capacity of V-nails
  352. A method to estimate wood surface moisture content during drying
  353. Comparative study of wood flour photodegradation of two wood species submitted to artificial weathering
  354. A newly-developed model for predicting cutting power during wood sawing with circular saw blades
  355. Effect of loading rate on mechanical properties of micro-sized oak wood
  356. The effect of natural weathering on untreated wood surface
  357. Fractioning of bark of Pinus pinea by milling and chemical characterization of the different fractions
  358. Effects of plasma surface treatment on bending strength and modulus of elasticity of beech and poplar plywood
  359. Effect of the anatomical structure, wood properties and machining conditions on surface roughness of wood
  360. Effects of heat treatment on the adhesion strength, pendulum hardness, surface roughness, color and glossiness of Scots pine laminated parquet with two different types of UV varnish application
  361. Physical and mechanical properties of juvenile wood from Neolamarckia cadamba planted in west Malaysia
  362. Clasificación mecánica de tablas de pinos resinosos cultivados en el nordeste de Argentina
  363. Polypropylene-based wood-plastic composites: Effect of using a coupling agent derived from a renewable resource
  364. Larvicidal activities of some bark and wood extracts against wood-damaging insects
  365. Efecto del manejo silvícola sobre la densidad básica de la madera en sistemas forestales de rotación corta
  366. Xilotecnia of the wood of Acacia schaffneri from the State of Hidalgo, Mexico
  367. Determination of decay resistance against Pleurotus ostreatus and Coniophora puteana fungus of heat-treated scotch pine, oak and beech wood species
  368. Improvement of the durability of heat-treated wood against termites
  369. Thermal analysis of oriental beech sawdust treated with some commercial wood preservatives
  370. Physical, mechanical and thermal properties of wood/zeolite/plastic hybrid composites
  371. Uso del método de resistografía para la predicción de la densidad básica de la madera en árboles en pie de Pinus radiata
  372. The influence of raw material growth region, anatomical structure and chemical composition of wood on the quality properties of particleboards
  373. Propiedades de tableros aglomerados de partículas fabricados con madera de Eucalyptus urophylla
  374. Enhancing dimensional stability of oriented strand composites within biorefinery
  375. Optimization of sanding parameters using response surface methodology
  376. Toxic effects of three selected Malaysian timbers plant extracts against subterranean termites
  377. Mechanical, dynamic mechanical and morphological properties of composites based on recycled polystyrene filled with wood flour wastes
  378. Valorization of Cistus ladanifer and Erica arborea shrubs for fuel: Wood and bark thermal characterization
  379. Influence of test method on biodegradation of bamboo-plastic composites by fungi
  380. Using a parametric study to analyse the performance of wood solar dryers with glazed walls
  381. The effect of Nano-MgO on the mechanical and flammability properties of hybrid nano composites from wood flour-polyethylene
  382. The effect of titanium dioxide nanoparticles obtained by microwave-assisted hydrothermal method on the color and decay resistance of pinewood
  383. Decay resistance of wood impregnated with monoethanolamine and sodium bisulfite pulping black liquors
  384. Evaluation of plastic composites made with Laccosperma secundiflorum and Eremospatha macrocarpa canes
  385. Efecto de la presión de prensado y la adición de lignina kraft en la producción de tableros aglomerados autoenlazados a partir de Gynerium sagittatum pretratada con vapor
  386. Cutting distance as factor to evaluate the quality of wood machined surfaces: A preliminary study
  387. Evaluation of the mechanical and physical properties of particleboard manufactured from Canola (Brassica napus) straws
  388. Mechanical, morphological and thermal properties of nano-boron nitride treated wood materials
  389. Decay resistance of four fast-growing Eucalypts wood exposed to three types of fields
  390. Analysis of the mechanical properties of wood-plastic composites based on agriculture Chili pepper waste
  391. Effect of microwave treatment on the impregnability and mechanical properties of Eucalyptus globulus wood
  392. A preliminary investigation of nigerian Gmelina arborea and Bambusa vulgaris for pulp and paper production
  393. The influence of short-term thermo-mechanical densification on the surface wettability of wood veneers
  394. Plasticity increase of beech veneer by steaming and gaseous ammonia treatment
  395. Ultrasonic phytosanitation of pinewood nematode infected wood
  396. Timber wastes torrefaction for energy use
  397. Color changes of wood from Pinus taeda and Schizolobium parahybum treated by in situ polymerization of methyl methacrylate using cross-linkers
  398. Effect of Microwave treatment on longitudinal air permeability and preservative uptake characteristics of chir pine wood
  399. Color de la madera de dos eucaliptos expuestas al intemperismo natural en tres entornos ambientales diferentes
  400. Physical and mechanical properties of heat treated wood from Aspidosperma populifolium, dipteryx odorata and mimosa scabrella
  401. Effects of wollastonite on the properties of medium-density fiberboard (MDF) made from wood fibers and camel-thorn
  402. The effect of some technological production variables on mechanical and physical properties of particleboard manufactured from cotton (Gossypium hirsutum) stalks
  403. Wood chile peppers stalks-plastic composite production
  404. Optimization of termite in-ground monitoring stations: An evaluation trial
  405. Characterization of sorption behavior and mass transfer properties of four central africa tropical woods: Ayous, Sapele, Frake, Lotofa
  406. Hygromechanical strains during the drying of Eucalyptus nitens boards
  407. Thermogravimetric analysis of anningre tannin resin
  408. Surface properties of bamboo and Scots pine impregnated with boron and copper based wood preservatives after accelerated weathering
  409. Influence of wood sample size and species on the leaching of chromium and copper using different lab tests
  410. Effect of the Brazilian thermal modification process on the chemical composition of Eucalyptus grandis juvenile wood: Part 1: Cell wall polymers and extractives contents
  411. Effect of the Brazilian thermal modification process on the chemical composition of Eucalyptus grandis juvenile wood: Part 2: Solubility and ash content
  412. Thermal analysis of Oriental beech wood treated with some borates as fire retardants
  413. Ensayo de preservación de madera tratada con Zn y Mn efectividad de tratamiento antilixiviante con bórax luego de cinco años de contacto con el suelo
  414. Dimensional stabilization of wood treated with tall oil dissolved in different solvents
  415. Strategic planning for community sustainability in model forests: Case study of the Yoro model forest, Honduras
  416. Microscopic investigation of defects in thermally compressed poplar wood panels
  417. Performance of copper azole treated softwoods exposed to marine borers
  418. Stress characteristics and stress reversal mechanism of white birch (Betula platyphylla) disks under different drying conditions
  419. Differences in dynamic modulus of elasticity determined by three vibration methods and their relationship with static modulus of elasticity
  420. Cambios en la mojabilidad en superficies de maderas tratadas térmicamente: Angulo de contacto y energía libre superficial
  421. Sorption behavior of four tropical woods using a dynamic vapor sorption standard analysis system
  422. Some technological properties of laminated veneer lumber produced with fast-growing Poplar and Eucalyptus
  423. Wood planing properties of Australian plantation-grown Eucalypts
  424. Effect of extractive content on the thermal stability of two wood species from Brazil
  425. Studies on effect of coat thickness on the moisture uptake by a hardwood substrate
  426. Effect of mechanical treatment on properties of cellulose nanofibrils produced from bleached hardwood and softwood pulps
  427. Ultrasonido y anisotropía en madera de Thuja plicata y Acer saccharum
  428. Analysis of volumetric swelling and shrinkage of heat treated woods: Experimental and artificial neural network modeling approach
  429. NIR spectroscopy can evaluate the crystallinity and the tensile and burst strengths of nanocellulosic films
  430. Wood and charcoal identification of five species from the miscellaneous group known in Brazil as “Angelim” by Near-IR and wood anatomy
  431. Effect of styrene maleic anhydride on physical and mechanical properties of recycled polystyrene wood flour composites
  432. Analysing the drying behavior of juvenile and mature Eucalyptus saligna wood in drastic drying test for optimal drying schedule
  433. Planificación agregada en la cosecha forestal: Un modelo de programacion matemática y solucion
  434. Natural durability of Cedrus atlantica wood related to the bioactivity of its essential oil against wood decaying fungi
  435. Mechanical parameters of thermally modified ash wood determined by compression in radial direction
  436. Influencia de las dimensiones de la sección transversal sobre la resistencia a flexión en madera aserrada de Populus deltoides cultivado en Argentina
  437. Decay resistance, thermal degradation, tensile and flexural properties of sisal carbon hybrid composites
  438. CO2 adsorption on agricultural biomass combustion ashes
  439. Effect of weathering on physical and mechanical properties of hybrid nanocomposite based on polyethylene, woodflour and nanoclay
  440. Hygroscopic properties following drying affects wood consumption by Odontotermes obesus
  441. Gasificación del aserrín de pino (Pinus arizonica) en un reactor de lecho fluidizado: Análisis de las variables del proceso
  442. Applicability evaluation of Cupressus lusitanica for pulp production
  443. The effects of boron derivatives as pretreatment chemicals for biodegradation of sunflower stalks
  444. Wood machining properties of Australian plantation-grown Eucalypts
  445. Shape and cell wall slenderness effects on the stiffness of wood cell aggregates in the transverse plane
  446. Efecto del solvente y de la relación masa/solvente, sobre la extracción de compuestos fenólicos y la capacidad antioxidante de extractos de corteza de Pinus durangensis y Quercus sideroxyla
  447. Surface wettability of Brazilian tropical wood flooring treated with He plasma
  448. Effect of weathering on wood treated with tall oil combined with some additives
  449. Wood under fresh water: Effect on the chemical properties and on decay resistance
  450. Preparation and characterization of nanofibrillated Cellulose/Poly (Vinyl Alcohol) composite films
  451. Moisture sorption isotherms and heat of sorption of Algerian bay leaves (Laurus nobilis)
  452. Mechanical properties of chemically modified portuguese pinewood
  453. Comunicación científica: Avances en la profesionalización
  454. Effects of nano-clay on biological resistance of wood-plastic composite against five wood-deteriorating fungi
  455. Effects of nano-clay particles and oxidized polypropylene polymers on improvement of the thermal properties of wood plastic composite
  456. Influencia de la granulometria de la muestra en la discriminación de especies de Salix por infrarrojo cercano
  457. Evaluation of physical and mechanical properties of wild cherry wood heat-treated using the thermowood process
  458. Effect of Albino ophiostoma strains on Eucalyptus nitens extractives
  459. Compression and flexural properties of finger jointed mango wood sections
  460. Estudio comparativo entre fluorescencia de rayos X y reflectancia difusa de infrarrojos cercanos para la determinación de la retención en madera impregnada con arseniato de cobre cromatado
  461. Physico-mechanical properties of plywood bonded by nano cupric oxide (CuO) modified pf resins against subterranean termites
  462. Mejoramiento de la productividad en una industria maderera usando incentivo remunerativo
  463. Alternative compositions of oriented strand boards (OSB) made with commercial woods produced in Brazil
  464. Furanic copolymers with synthetic and natural phenolic materials for wood adhesives - a maldi tof study
  465. Adaptation of the tween 80 assay with a resolution V fractional factorial design and its application to rank Ophiostoma fungi with wood extractive degrading capabilities
  466. Characterization of two cellulosic waste materials (orange and almond peels) and their use for the removal of methylene blue from aqueous solutions
  467. The effect of nano-zinc oxide on particleboard decay resistance
  468. Decay and termite resistance of particleboard manufactured from wood, bamboo and rice husk
  469. Studies on the loss of gloss of shellac and polyurethane finishes exposed to UV
  470. Fungicidal effect of Lippia alba essential oil on a white-rot fungus
  471. Air permeability of sugi (Cryptomeria japonica) wood in the three directions
  472. Mid-infrared spectroscopy and dynamic mechanical analysis of heat-treated obeche (Triplochiton scleroxylon)wood
  473. Utilization of temperature kinetics as a method to predict treatment intensity and corresponding treated wood quality: Durability and mechanical properties of thermally modified wood
  474. Evaluation of wood surface roughness depending on species characteristics
  475. Prediction of mechanical properties - modulus of rupture and modulus of elasticity - of five tropical species by nondestructive methods
  476. Physical and mechanical properties of nanoreinforced particleboard composites
  477. Phytosanitation of mountain pine beetle infected lodgepole pine using dielectric fields at radio frequencies
  478. Influence of specimen orientation on determination of elesticity in static bending
  479. Analytical and experimental studies on stress capacity with modified wood members under combined stresses
  480. Liquefied wood as a partial substitute of melamine-urea-formaldehyde and urea-formaldehyde resins
  481. Aplicación de celulosa nanofibrilada, en masa y superficie, a la pulpa mecánica de muela de piedra: una sólida alternativa al tratamiento clásico de refinado
  482. Characterization of the rhizophora particleboard as a tissue-equivalent phantom material bonded with bio-based adhesive
  483. Predicting moisture content from basic density and diameter during air drying of Eucalyptus and corymbia logs
  484. Application of aqueous two phase systems based on polyethylene glycol and sodium citrate for the recovery of phenolic compounds from Eucalyptus wood
  485. Design and efficiency of a small-scale woodchip furnace
  486. Effects of thinning on diameter, heartwood, density and drying defects of Gmelina arborea
  487. Treatability of Melia composita using vacuum pressure impregnation
  488. The effect of moisture content on the retention and distribution of nano-titanium dioxide in the wood
  489. Efecto del raleo sobre las propiedades anatómicas de la madera de Pinus taeda
  490. Influence of moisture content on the wave velocity to estimate the mechanical properties of large cross-section pieces for structural use of Scots pine from Spain
  491. Optimización 3D de patrones de corte para trozas de Pino radiata con cilindro central defectuoso
  492. Changes in the chemical structure and decay resistance of heat-treated narrow-leaved ash wood
  493. Roughness and color evaluation of wood polymer composites filled by household waste of mate-tea
  494. The effect of grain direction on lateral nail strength and thermal conductivity of structural plywood panels
  495. Characterization of phenolic compounds in olive stones of three moroccan varieties
  496. Caracterización de la madera aserrada de Pinus radiata modificada térmicamente
  497. Propiedades físico-mecánicas de una guadua mexicana (Guadua aculeata)
  498. Characterization and utilization of reed stem as a lignocellulosic resource for particleboard production
  499. Microstructural aspects of thermally modified Eucalyptus grandis wood
  500. Caracterización de propiedades mecánicas para segregar familias de Eucalyptus nitens por Nanoindentación en relación al grado de agrietamiento de las trozas
  501. Study on the effects of wood flour geometry on physical and mechanical properties of wood-plastic composites
  502. Comparative biological resistance of differently thermal modified wood species against decay fungi, Reticulitermes grassei and Hylotrupes bajulus
  503. Application of Artificial Neural Networks for predicting tensile index and brightness in bleaching pulp
  504. Concentrations of heavy metals in Eucalyptus and Pinus wood sawdust and smoke, Copperbelt province, Zambia
  505. Caracterización estructural de madera aserrada de pinos cultivados en Uruguay
  506. Modelo de un sistema multi-agente para la optimización de la cadena de suministros en la industria de la madera de coníferas
  507. Structural features of dioxane lignin from Eucalyptus globulus and their relationship with the pulp yield of contrasting genotypes
  508. Effect of nanoclay contents on properties, of bagasse flour/reprocessed high density polyethylene/nanoclay composites
  509. Possibility of using the expanded polystyrene and rape straw to the manufacture of lightweight particleboards
  510. Mineral content in relation to radial position, altitude, chemical properties and density of Persian ironwood
  511. Tensiones de crecimiento longitudinales en árboles de Eucalyptus nitens con dimensiones aserrables
  512. Ability of plant-derived oils to inhibit dampwood termite (Zootermopsis augusticollis) activity
  513. Heat treatment of Tunisian soft wood species: Effect on the durability, chemical modifications and mechanical properties
  514. Natural coloration of wood material by red beetroot (Beta vulgaris) and determination color stability under UV exposure
  515. The percentiles ratio 20th to 5th of bending strength and stiffness distribution in the case of spanish softwoods
  516. Segmentación de elementos anatómicos en imágenes microscópicas de madera usando técnicas de visión artificial
  517. The effect of extractives on acoustical properties of persian silk wood (Albizia julibrissin)
  518. Effect of spacing on some mechanical properties of narrow leaved ash (Fraxinus angustifolia) wood
  519. Physical properties of beech wood thermally modified in hot oil and in hot air at various temperatures
  520. Densidad y propiedades mecánicas de la madera de Acacia melanoxylon implantada en Argentina
  521. The effect of traditional hygro-thermal pretreatments on the acoustical characteristics of white mulberry wood (Morus alba)
  522. Effects of nano-wollastonite on physical and mechanical properties of medium-density fiberboard
  523. Properties of OSB panels with veneer inclusion
  524. Effect of extractives on wood color of heat treated Pinus radiata and Eucalyptus pellita
  525. Mechanical, thermal, morpological properties and decay resistance of filled hazelnut husk polymer composites
  526. Kraft pulping properties of European black pine cone
  527. Evaluation of axial impregnation as an alternative to classical wood vacuum pressure impregnation method
  528. Dimensional and morphological analysis of the detritus from six European wood boring insects
  529. Effects of oleothermal treatment and polydimethylsiloxane (PDMS) coating on natural weathering of beech and fir woods
  530. Empirical statistical model for predicting wood properties of Paulownia fortunie: Part 1: Physical and biometrical properties
  531. Marine borers resistance of chemically modified portuguese wood
  532. Antitermitic effects of three wood stain treatments
  533. Some mechanical properties of plywood produced from eucalyptus, beech, and poplar veneer
  534. Prediction of bending properties for beech lumber using stress wave method
  535. Determinación experimental de valores característicos de resistencia para Guadua angustifolia
  536. Effects of nanosilver-impregnation and alfalfa-intercropping on fluid transfer in downy black poplar wood
  537. Density, Calorific Value and Cleavage Strength of Selected Hybrid Eucalypts Grown in Uganda
  538. Wood-based panels industry in Turkey: future raw material challenges and suggestions
  539. Study on preparation and properties of phenol-formaldehyde-chinese fir liquefaction copolymer resin
  540. Oak wood inhabiting fungi and their effect on lignin studied by UV microspectrophotometry
  541. Wood thermodegradation: experimental analysis and modeling of mass loss kinetics
  542. Free shrinkage of wood determined at the cellular level using an environmental scanning electron microscopE
  543. A methodology to select a group of species among 131 tropical (colombian) species for bowed timber applications
  544. Toxicity potential in the extraneous compounds of white mulberry wood (Morus alba)
  545. Leaching and decay resistance of alder and pine wood treated with copper based wood preservatives
  546. Efecto de la temperatura de termotratamiento en el comportamiento eléctrico de la madera de pino radiata
  547. Surface roughness of heat treated Eucalyptus grandis wood
  548. EFECTOS DEL CONTENIDO DE HARINA DE CORTEZA Y MADERA DE Pinus radiata SOBRE LA BIODEGRADACIÓN ACELERADA DE COMPUESTOS MADERA-PLÁSTICO
  549. Analysis of rigidity loss and deterioration from exposure in a decay test field of thermorectificated Eucalyptus grandis wood
  550. The effect of thermal treatment on physical and mechanical properties of Luehea divaricata hardwood
  551. Integridad científica: principio que inspira el prestigio
  552. Some Physical characteristics of thermally modified oriental- beech wood
  553. Degradation of polypropylene in naturally and artificially weathered plastic matrix composites
  554. Chemical and biometrical properties of plum wood and its application in pulp and paper production
  555. Tensiones de crecimiento y propiedades físicas de la madera de Eucalyptus dunnii implantado en Argentina
  556. Improving dimensional stability of injection molded wood plastic composites using cold and hot water extraction methods
  557. Some surface properties of thermally modified scots pine after artificial weathering
  558. Efecto de las tensiones de crecimiento en el rendimiento y calidad del aserrado de Eucalyptus dunnii
  559. Effect of ultrasound pretreatment on wood prior to vacuum drying
  560. Sabiendo lo que hay que saber en Ciencias de la Madera revalorizado en la sociedad del conocimiento
  561. Effect of drying process on marupá wood color
  562. Influence of residual lignin content on physical and mechanical properties of kraft pulp/pp composites
  563. Microfibril angle of Eucalyptus grandis wood in relation to the cambial age
  564. Color stability of weathered heat-treated teak wood
  565. Effects of veneer drying at high temperature and chemical treatments on equilibrium moisture content of plywood
  566. Effect of precipitation pattern on leaching of preservative from treated wood and implications for accelerated testing
  567. Patrones de variación de la densidad de la madera y morfometría celular de Salix babylonica para la determinación de la edad de transición entre madera juvenil y madura
  568. A contribution to the identification of charcoal origin in Brazil: I- anatomical characterization of corymbia and eucalyptus
  569. Valoración mecanotermica de una resina biodegradable como agente de acoplamiento de materiales compuestos celulosicos/polímero hidrofóbico
  570. Predicting the young’s modulus of defect free radiata pine shooks in finger-jointing using resonance frequency
  571. Quince años de la revista Maderas-Ciencia y tecnología: De la infancia a la adolescencia
  572. Effects of heat-treatment on permeability of untreated and nanosilver-impregnated native hardwoods
  573. Propiedades físico-mecánicas de algunas maderas nativas chilenas coníferas y latifoliadas por ultrasonido
  574. FORMACIÓN DE ELEMENTOS ANATÓMICOS EN MADERAS DURAS: UNA REVISIÓN DESDE UNA PERSPECTIVA GENÓMICA
  575. Chemical changes of heat treated pine and eucalypt wood monitored by FTIR
  576. Transición de madera juvenil a madura en un clon de Populus deltoides implantado en Buenos Aires Argentina
  577. Correlations among microfibril angle, density, modulus of elasticity, modulus of rupture and shrinkage in 6-year-old Eucalyptus urophylla × E. grandis
  578. Fijación química del preservante CCA-C en la madera de Pinus elliottii Parte 2: Cinética y modelización
  579. The effect of micron sized wood fibers in wood plastic composites
  580. Method to test fungal degradation of bamboo and wood using vermiculite as reservoir for moisture and nutrients
  581. Evaluation of kiln-drying schedules for wild cherry wood (Cerasus avium)
  582. BONDING BEHAVIOR OF Eucalyptus benthamii WOOD TO MANUFACTURE EDGE GLUED PANELS
  583. THE EFFECT OF WOOD SPECIES ON THE ANTI-SKID RESISTANCE OF COATINGS
  584. RADIATA PINE pH AND BUFFERING CAPACITY: EFFECT OF AGE AND LOCATION IN THE STEM
  585. THERMAL MODIFICATION OF Eucalyptus grandis WOOD: VARIATION OF COLORIMETRIC PARAMETERS
  586. VARIABILIDAD DE LAS PROPIEDADES FISICAS, MORFOLOGICAS Y TERMICAS DE LA FIBRA DE CORTEZA DE Eucalyptus nitens
  587. CARACTERIZACIÓN MECÁNICA Y MORFOLÓGICA DE TERMOPLÁSTICOS RECICLADOS ESPUMADOS REFORZADOS CON SUB PRODUCTOS DE MADERA
  588. Aplicación de analisis de imagen y tecnología NIRS a la evaluacion de la porosidad de planchas, láminas y tapones de corcho y su relacion con la calidad industrial
  589. Efecto del comportamiento termo-higromecánico a macroescala de madera bajo compresión perpendicular a la fibra en las propiedades nanomecánicas de su estructura celular
  590. Ultrasound waves for assessing the technological properties of Pinus caribaea var hondurensis and Eucalyptus grandis wood
  591. Análisis experimental de las barras de madera laminada con sección tubular utilizadas en la construcción de una malla espacial
  592. Propiedades químicas, color y humectabilidad de partículas de Laureliopsis philippiana (tepa) con y sin tratamiento térmico
  593. EFECTO DE LAS CARACTERISTICAS DE HARINA DE MADERA EN LAS PROPIEDADES FÍSICO-MECÁNICAS Y TÉRMICAS DE POLIPROPILENO RECICLADO
  594. Effects of thermal pre-treatment and variables of production on properties of OSB panels of Pinus taeda
  595. Investigation on lateral resistance of joints made with drywall and sheet metal screws in bagasse particleboard and comparison with that of commercial MDF
  596. Análisis de la estructura anatómica de la madera y del carbón de dos especies de Sapotaceae
  597. Investigation of oscillating climates for wood drying using the flying wood test and loaded beams: need for a new mechano-sorptive model
  598. EFECTO DE UN ENVEJECIMIENTO ACELERADO MEDIANTE RAYOS UV EN LA PROPAGACIÓN SUPERFICIAL DE GRIETAS DE DEBOBINADO EN TABLEROS CONTRACHAPADOS DE Eucalyptus nitens
  599. EFFECT OF THE BENCH SCALE EXTRACTION CONDITIONS ON Pinus radiata BARK EXTRACT YIELD, ANTIOXIDANT PROPERTIES AND COMPOSITION
  600. Chemical Modification of Tannin/Furanic Rigid Foams by Isocyanates and Polyurethanes
  601. Influencia del azulado (mancha azul) en la densidad y estabilidad dimensional de la madera de Pinus sylvestris
  602. Identificación del cilindro nudoso en imágenes TC de trozas de Pinus radiata: Estudio Comparativo
  603. Tratamiento químico de acetilación en madera de Pinus radiata
  604. The potential use of organosilane water soluble nanomaterials as water vapor diffusion retarders for wood
  605. Contenido de duramen y de albura en Eucalyptus globulus y Acacia melanoxylon implantadas en Argentina
  606. La-modified SBA-15/H2O2 systems for the microwave assisted oxidation of organosolv beech wood lignin
  607. Influence of uron resins on the performance of UF resins as adhesives for plywood
  608. Laboratory experiments on hygrothermal behaviour of real-scale timber walls
  609. Determinación de un elemento de volumen representativo de probetas de tablero tensado
  610. Madera de compresión en Pinus radiata III: propiedades de pulpas kraft
  611. Relationships between microfibril angle, modulus of elasticity and compressive strength in Eucalyptus wood
  612. Effect of thermal rectification on colors of Eucalyptus Saligna and Pinus caribaea Woods
  613. Efecto del rectificado y desgaste de cuchillos en la calidad superficial de molduras de pino radiata
  614. Wettability and surface roughness characteristics of medium density fiberboard panels from rhododendron (Rhododendron ponticum) biomass
  615. Efficiency of natural wood extractives as wood preservatives against termite attack
  616. Surface properties of MDF coated with calcite/clay and effects of fire retardants on these properties
  617. Why Simulate a Sample of Recycled Wood?
  618. Efecto de diferentes condiciones de crecimiento en el dimorfismo levadura-micelio de la cepa albina PcF2A29 de la especie Ophiostoma piceae
  619. Evaluation of wooden materials deteriorated by marine-wood boring organisms in the Black Sea
  620. Propiedades físicas y mecánicas de compuestos de polietileno reciclado y harinas de corteza y madera de Pinus radiata fabricados mediante moldeo por inyección
  621. Efecto del raleo en el crecimiento y algunas propiedades de la madera de Eucalyptus nitens en una plantación de 15 años
  622. Valorization of Moroccan olive stones by using it in particleboard panels
  623. Efecto de la tasa de compresión en la morfología de grietas de debobinado para chapas de Eucalyptus nitens
  624. Análisis del comportamiento reológico y termo-higromecánico en probetas de tableros tensados de madera para puentes a condiciones ambientales variables
  625. Caracterización nanomecánica de la estructura celular y anatómica de Eucalyptus nitens y su relación con la frecuencia de grietas y rajaduras en madera redonda
  626. Efecto de la densidad de plantación inicial en el módulo de elasticidad dinámico de árboles en pie y trozas de una plantación de pino radiata de 28 años, en la zona de arenales, Chile
  627. Fracturas en madera de Eucalyptus nitens: efecto de las propiedades mecánicas a nivel ultraestructural y de la anatomía celular
  628. Effect of bark stripping on the electrical impedance of Quercus suber leaves
  629. Preservación de madera tratada con Zn y Mn y efectividad de tratamiento antilixiviante con bórax
  630. Condensed tannin reactivity inhibition by internal rearrangements: Detection by CP-MAS 13C NMR
  631. Predicción del contenido de humedad de equilibrio de la madera en función del peso específico de la pared celular y variables ambientales
  632. Fisiología de hongos filamentosos: efecto del Zn y Mn
  633. Developments in undergraduate wood science education at Stellenbosch University, South Africa
  634. Efecto de la carga de sulfito de sodio en el pulpaje NSSC de E. globulus
  635. Effect and mechanism of nanosize copper oxide on some physical and mechanical properties of flakeboards
  636. Influences of the operating variables of acetosolv pulping on pulp properties of oil palm frond fibres
  637. Variación radial y longitudinal de la densidad básica en árboles de Eucalyptus regnans de 16 años
  638. Mass transfer in medium density fiberboard (MDF) modified by Na+ montmorillonite (Na+MMT) nanoclay
  639. Inclusion of the sorption hysteresis phenomenon in future drying models. Some basic considerations
  640. Evaluating vibrations on a small-scale model of a timber footbridge
  641. Effectiveness of selected preservatives in protecting Ugandan grown Eucalyptus grandis wood against termite attack
  642. Fibre level modelling of free water behaviour during wood drying and wetting
  643. Weathering performance of particleboards manufactured from blends of forest residues with Red pine (Pinus brutia) wood
  644. A correlation between the gas and liquid permeabilities of beech wood heat-treated in hot water and steam mediums
  645. Effects of end-pressure on the finger-joint quality of black spruce lumber: a microscopic analysis
  646. Runoff characteristics in forest plots before and after wood ash fertilization
  647. Comparison of phenolic extracts obtained of Pinus radiata bark from pulp and paper industry and sawmill industry
  648. Developing a model system in vitro to understand tracheary element development in Douglas-fir (Pseudostuga mensziesii)
  649. Nano-based surface treatm effects on swelling, water sorption and hardness of wood
  650. Solar drying of pine lumber: Verification of a mathematical model
  651. Rugosidad superficial y potencia de corte en el cepillado de Acacia melanoxylon y Sequoia sempervirens
  652. Influence of veneer quality on beech LVL mechanical properties
  653. Chemical modification of cellulose by acylation: Application to adsorption of methylene blue
  654. Estudio del mojado y caracterización superficial por microscopía de barrido laser confocal de chapas de madera obtenidas por desenrollo
  655. Timber management practices and timber species used by small scale furniture workshops in Uganda
  656. The effect of aging on element plant availability and bacterial counts of mixtures of wood ash and sewage sludge
  657. Searching for material symmetries in the burr wood of thuja by a direct contact ultrasonic method on spherical samples
  658. Lignocellulosic composites from Brazilian giant bamboo (Guadua magna): Part 2: Properties of cement and gypsum bonded particleboards
  659. Lignocellulosic composites from brazilian giant bamboo (Guadua magna) Part 1: Properties of resin bonded particleboards
  660. Fijación química del preservante CCA-C en la madera de Pinus elliottii Parte 1: Influencia de la temperatura y de la humedad relativa
  661. FRIENDLY WOOD PRESERVATIVE SYSTEM BASED ON POLYMERIZED TANNIN RESIN-BORIC ACID FOR OUTDOOR APPLICATIONS
  662. PREPARATION AND MECHANICAL CHARACTERIZATION OF PARTICLEBOARD MADE FROM MARITIME PINE AND GLUED WITH BIO-ADHESIVES BASED ON CORNSTARCH AND TANNINS
  663. DRYING BEHAVIOUR OF SECOND-GROWTH NOTHOFAGUS ALPINA
  664. EUCALYPTUS NITENS COMO MATERIA PRIMA PARA TABLEROS DE PARTICULAS
  665. STUDY OF PEDESTRIAN-INDUCED VIBRATIONS ON TIMBER FOOTBRIDGESC
  666. NEW METHODOLOGY TO OPTIMIZE SORTING IN WOOD DRYING
  667. EL MAÑANA ES LA EDAD DE LA MADERA
  668. INFLUENCE OF THE SURFACE ROUGHNESS OF PARTICLEBOARDS AND THEIR PERFORMANCE TOWARDS COATING
  669. FIRE RESISTANCE OF TWO PANEL PRODUCTS MADE FROM CHEMICALLY MODIFIED RAW MATERIAL
  670. A PRELIMINARY STUDY ON ULTRASONIC TREATMENT EFFECT ON TRANSVERSE WOOD PERMEABILITY
  671. COMPORTAMIENTO FRENTE AL FUEGO DE TABLEROS Y MADERA DE PINO RADIATA CON Y SIN PINTURA RETARDANTE DE LLAMA
  672. IDENTIFICACION DEL CILINDRO NUDOSO EN IMÁGENES TC DE TROZAS PODADAS DE PINUS RADIATA UTILIZANDO REDES NEURONALES ARTIFICIALES
  673. FUERZAS DE SUPERFICIE Y ADHESIÓN EN SISTEMAS CELULÓSICOS: NUEVA FORMA DE EVALUAR FIJACIÓN/DISPERSIÓN DE RESINA EN LA FABRICACIÓN DE PAPEL/CELULOSA
  674. CORRELATION BETWEEN DRYING DEFECTS, THEIR PARAMETERS AND MOISTURE GRADIENT IN KILN-DRIED, SOUTH AFRICAN GROWN EUCALYPTUS GRANDIS POLES
  675. EFECTOS DE LA INTEMPERIE EN EL COLOR DE DOS ACABADOS APLICADOS EN MADERA DE CEDRELA ODORATA Y CARAPA GUIANENSIS
  676. LA-CONTAINING SBA-15/H2O2 SYSTEMS FOR THE MICROWAVE ASSISTED OXIDATION OF A LIGNIN MODEL PHENOLIC MONOMER
  677. SOUND PRESSURE AS A TOOL IN THE ASSESSMENT OF THE SURFACE ROUGHNESS ON MEDIUM DENSITY FIBREBOARD RIP SAWING PROCESS
  678. COPPER ANCHORED TO AMINO-GROUP FUNCTIONALIZED SILICA GEL AS WOOD PRESERVATIVE AGAINST BROWN-ROT DECAY
  679. OF TRANSIENT MASS TRANSFER OF A GASEOUS COMPONENT IN AN ISOTHERMAL POROUS ADSORBENT
  680. ACTIVITY OF COMMERCIAL STILL WATERS FROM VOLATILE OILS PRODUCTION AGAINST WOOD DECAY FUNGI
  681. MEASUREMENT OF DYNAMIC SORPTION BEHAVIOUR OF SMALL SPECIMENS OF PINUS RADIATA - INFLUENCE OF WOOD TYPE AND MOISTURE CONTENT ON DIFFUSION RATE
  682. INVESTIGATION OF CHEMICAL CHANGES IN THE STRUCTURE OF THERMALLY MODIFIED WOOD
  683. INFLUENCE OF AGE AND HEIGHT POSITION ON COLOMBIAN GUADUA ANGUSTIFOLIA BAMBOO MECHANICAL PROPERTIES
  684. ESTUDIO DE LA PRODUCTIVIDAD DE CORTE EN MADERA PINUS ELLIOTTII UTILIZANDO UN PROTOTIPO DE ASERRADERO PORTÁTIL
  685. DETERMINATION OF DIFFERENCES IN ANATOMICAL AND CHEMICAL CHARACTERISTICS OF TENSION AND OPPOSITE WOOD OF 8-YEAR OLD EUCALYPTUS GLOBULUS
  686. ESTUDIO EXPLORATORIO DE LA VARIABILIDAD RADIAL Y APICAL DEL TAMAÑO Y FRECUENCIA DE LOS CANALES RESINÍFEROS EN PINO RADIATA
  687. Estudio preliminar de la contracción y el colapso en Eucalyptus nitens
  688. Compuestos no- estructurales de cementos comerciales y aserrín de maderas Argentinas
  689. Morphology of wood species affecting wood-thermoplastic interaction: microstructure and mechanical adhesion
  690. Wood color variation in undried and kiln-dried plantation-grown lumber of Vochysia guatemalensis
  691. Modelling of a solar wood dryer with glazed walls
  692. Bending strength and stiffness of structural laminated veneer lumber manufactured from fast-growing Argentinean Eucalyptus grandis
  693. Estudio exploratorio de los laminados de bambú Guadua angustifolia como material estructural
  694. Compression wood in Pinus radiata II: Density and chemical composition
  695. Modelación del Secado de Renovales de Canelo basado en el Coeficiente Global de Secado
  696. Identificación del Cilindro Nudoso en imágenes TC de trozas podadas de Pinus Radiata utilizando el Clasificador de Máxima Verosimilitud
  697. Distribution of Within-Ring Internal Checking in Pinus radiata Grown in Southern Chile
  698. Property characterization of Chusquea culeou, a bamboo growing in Chile
  699. Durability of Pinus elliottii Wood Impregnated with Quebracho Colorado (Schinopsis balansae) Bio-Protectives Extracts and CCA
  700. BENDING STRENGTH AND STIFFNESS OF POLES OF ARGENTINEAN Eucalyptus grandis
  701. ESTUDIO DE ALGUNAS PROPIEDADES FÍSICAS DE LA MADERA DE Acacia melanoxylon R. Br. EN ARGENTINA
  702. THE DENSITY, COMPRESSION STRENGTH AND SURFACE HARDNESS OF HEAT TREATED HORNBEAM (Carpinus betulus L.) WOOD
  703. CREEP BEHAVIOR OF BORATE-TREATED STRANDBOARD: EFFECT OF ZINC BORATE RETENTION, WOOD SPECIES, AND LOAD LEVEL
  704. Evolución del Módulo de Elasticidad Longitudinal entre 10°C y 100°C en piezas de Pinus radiata usando una técnica de evaluación no destructiva
  705. NATURAL TANNIN-BASED RIGID FOAMS AS INSULATION FOR DOORS AND WALL PANELS
  706. ESTUDIO EXPERIMENTAL DEL SECADO A TEMPERATURAS CONVENCIONALES DE ACACIAS
  707. Diez años después: La fluidez de la revista MCT
  708. MODELACIÓN FENOMENOLÓGICA DE LAS CURVAS DE SECADO POR ALTA TEMPERATURA DE PINO RADIATA
  709. PERFORACIONES ESCALARIFORMES EN VASOS DE ÁRBOLES NATIVOS DE CHILE
  710. SOME ASPECTS OF WESTERN HEMLOCK AIR PERMEABILITY
  711. NATURAL DURABILITY AND PERFORMANCE OF HORNBEAM CEMENT BONDED PARTICLEBOARD
  712. VARIATION IN ANISOTROPIC SHRINKAGE OF PLANTATION-GROWN PINUS RADIATA WOOD
  713. PHYSICAL AND MECHANICAL PROPERTIES OF PANEL BASED ON OUTER BARK PARTICLES OF WHITE BIRCH: MIXED PANELS WITH WOOD PARTICLES VERSUS WOOD FIBRES
  714. APPLICATION OF X-RAY TECHNIQUE IN NONDESTRUCTIVE EVALUATION OF EUCALYPT WOOD
  715. ETHYL SILICATES WITH DIFFERENT HYDROLYSIS DEGREE LIKE NON-FLAMMABLE IMPREGNATING MATERIAL FOR WOOD
  716. FABRICACION DE PELLETS DE CARBONILLA, USANDO ASERRIN DE Pinus radiata (D. Don), COMO MATERIAL AGLOMERANTE
  717. PLAN AGREGADO DE PRODUCCIÓN EN BARRACAS MADERERAS: ESTUDIO DE CASO PARA UNA PEQUEÑA INDUSTRIA
  718. COMPATIBILITY OF FOUR EASTERN CANADIAN WOODS WITH GYPSUM AND GYPSUM-CEMENT BINDERS BY ISOTHERMAL CALORIMETRY
  719. A mesoscopic drying model applied to the growth rings of softwood: mesh generation and simulation results
  720. Using Flow Simulation as a Decision Tool for Improvements in Sawmill Productivity
  721. APLICACIÓN DE ONDAS SÓNICAS Y ULTRASÓNICAS COMO MEDIO DE CONTROL DEL ATAQUE DE TERMITAS SUBTERRÁNEAS RETICULITERMES FLAVIPES (KOLLAR) EN MADERA DE PINO RADIATA
  722. DEVELOPMENT OF A TECHNIQUE TO DETERMINE THE 3D ELASTICITY TENSOR OF WOOD AS APPLIED TO DRYING STRESS MODELING
  723. CONDICIONANTES DE LAS GRIETAS INTERNAS DENTRO DE LOS ANILLOS DURANTE EL SECADO DE PINO RADIATA
  724. DETERMINACION COEFICIENTE CONVECTIVO DE MATERIA EN EL SECADO DE SÓLIDOS
  725. MONITOREO DEL PROCESO DE MAQUINADO DE AROMO AUSTRALIANO (ACACIA MELANOXYLON) CON EMISIÓN ACÚSTICA Y SU RELACIÓN CON LA CALIDAD SUPERFICIAL RESULTANTE
  726. EFECTO DEL TAMAÑO DE PROBETA SOBRE EL CIZALLE Y LA ADHESIÓN EN UNIONES CON ACETATO DE POLYVINILO
  727. NANOINDENTACIONES Y ULTRAESTRUCTURA EN MADERA DE EUCALYPTUS NITENS CON MICRO Y MESO GRIETAS
  728. APLICACIÓN DE ESPECTROMETRÍA DE RAYOS X PARA EL ESTUDIO DE LA MADERA: ALGUNOS RESULTADOS INICIALES
  729. CARACTERÍSTICAS FÍSICAS DE LA MADERA DE PINO PROCEDENTE DE RALEOS EN EL NOROESTE DE ESPAÑA
  730. INFLUENCE OF LOG TEMPERATURE IN IRREGULARITIES ON STRAND GEOMETRY DETECTED BY DIGITAL IMAGE ANALYSIS
  731. ESFUERZOS DE CORTE Y RUGOSIDAD SUPERFICIAL EN EL FRESADO DE PINO RADIATA Y SU RELACIÓN CON EMISIÓN ACÚSTICA
  732. EFECTO DE LA HUMEDAD DE EQUILIBRIO EN LA RUGOSIDAD DE TABLEROS DE FIBRAS DE DENSIDAD MEDIA (MDF)
  733. EXPORTACIÓN DE MADERA ASERRADA DE CONÍFERA CHILENA: UN ANÁLISIS DE SU COMPETITIVIDAD
  734. RACKING AND BENDING TESTS FOR PREFABRICATED WALL PANELS
  735. CARACTERIZACIÓN ESTRUCTURAL DE LA MADERA DE Pinus radiata D. Don DEL PAÍS VASCO (ESPAÑA) ACORDE A LAS MODIFICACIONES NORMATIVAS
  736. MADERA DE COMPRESIÓN EN PINUS RADIATA D. DON: I, CARACTERÍSTICAS ANATÓMICAS
  737. EXPERIMENTAL STUDY OF THERMAL EFFECT ON OLIVE WOOD POROUS STRUCTURE DURING CARBONIZATION
  738. POST-THERMAL TREATMENT OF ORIENTED STRANDBOARD (OSB) MADE FROM CYPRESS (CUPRESSUS GLAUCA LAM.)
  739. DETERMINACIÓN DE LOS ESFUERZOS DE DISEÑO DE VIGAS LAMINADAS DE PINO CARIBE (Pinus caribaea var. hondurensis) ENCOLADAS CON ADHESIVO DE ISOCIANATO (MDI)
  740. TÉCNICA DE MOIRÉ APLICADA AL ANÁLISIS DE ESFUERZOS DE COMPRESIÓN EN EL BAMBÚ GUADUA
  741. Estudio del contenido y la calidad de la lignina mediante Pirólisis analítica en madera de Pinus caribaea
  742. Walter G. Kauman (1923-2005)
  743. TENSIONES DE CRECIMIENTO EN HÍBRIDOS DE ÁLAMO CRECIENDO EN CHILE
  744. INTRA-RING COMPRESSION STRENGTH OF LOW DENSITY HARDWOODS
  745. DENSIFIED RADIATA PINE FOR STRUCTURAL COMPOSITES
  746. HIGH-FREQUENCY ELECTRIC CURRENT FOR DRYING OF WOOD - HISTORICAL PERSPECTIVES
  747. OPPORTUNITY AND CHALLENGE IN WOOD DRYING: QUALITY CONTROL AND ENERGY SAVING
  748. WOOD FRACTURE PATTERN DURING THE WATER DESORPTION PROCESS
  749. CHARACTERIZATION OF DIFFUSIONNAL TRANSFERS OF BOUND WATER AND WATER VAPOR IN BEECH AND SPRUCE
  750. MICROSTRUCTURAL AND PHYSICAL ASPECTS OF HEAT TREATED WOOD: PART 2. HARDWOODS
  751. THE WOOD CELL WALL AT THE ULTRASTRUCTURAL SCALE - FORMATION AND TOPOCHEMICAL ORGANIZATION
  752. MICROSCOPIC STUDIES ON MODIFIED WALL STRUCTURE AND LIGNIN TOPOCHEMISTRY IN XYLEM FIBRES OF POPLAR AFTER WOUNDING
  753. SURFACE COLOUR CHANGE IN WOOD DURING DRYING ABOVE AND BELOW FIBRE SATURATION POINT
  754. DEVELOPMENT OF ELASTIC STRAIN AND MECHANO-SORPTIVE STRAIN DURING CONDITIONING OF EUCALYPTUS CAMALDULENSIS LUMBER IN BATCH KILN
  755. WITHIN-TREE VARIABILITY IN THE DRYING PROPERTIES FOR BLACKBUTT TIMBER IN NEW SOUTH WALES
  756. THE EFFECT OF DRYING AND STORAGE CONDITIONS ON CASE HARDENING OF SCOTS PINE AND NORWAY SPRUCE TIMBER
  757. SECADO INDUSTRIAL DEL PINO RADIATA: TIEMPO DE ESTERILIZACIÓN CON CALOR Y EVOLUCION TEMPORAL DE LA TEMPERATURA
  758. ESTUDIO DE LA VELOCIDAD DEL SECADO DE RENOVALES DE CANELO DRIMYS WINTERI
  759. ESTUDIO DE LA CINETICA DEL SECADO CONVENCIONAL Y BAJO VACIO DEL PINO RADIATA
  760. COLOUR DEVELOPMENT ON DRYING
  761. POLYMER NANOCOMPOSITES: SYNTHETIC AND NATURAL FILLERS A REVIEW
  762. Influence of Mount-Foot Penetration Depth on the Quantification of Drying Strain
  763. INDUSTRIAL EVALUATION OF RE-DRY STRATEGY FOR SOFTWOOD LUMBER
  764. DRYING BEHAVIOR AND PERMEABILITY OF Eucalyptus grandis LUMBER
  765. A REVIEW OF THE CONFIGURATION OF BORDERED PITS TO STIMULATE THE FLUID FLOW
  766. THE INFLUENCE OF SOME FACTORS ON THE TIMBER DRYING PROCESS, ANALYZED BY A GLOBAL SIMULATION MODEL
  767. SECADO DE EUCALYPTUS NITENS Y GLOBULUS Y SU APROVECHAMIENTO EN BLOCKS, PISOS Y MUEBLES
  768. DURABILIDAD NATURAL DE LA MADERA DE CINCO ESPECIES APTAS PARA LA INDUSTRIA DE LA CONSTRUCCIÓN
  769. EFICACIA DE PRESERVANTES EN MADERA DE PINUS RADIATA D. DON, FRENTE AL ATAQUE DE TERMITAS SUBTERRÁNEAS (RETICULITERMES HESPERUS)
  770. CARACTERIZACIÓN FÍSICA Y MECÁNICA DE PINUS TAEDA ORIGEN MARION EN PLANTACIONES DE DIFERENTES EDADES Y DETERMINACIÓN DE USOS POTENCIALES, MISIONES, ARGENTINA
  771. THE DRYING OF RED OAK AT VACUUM PRESSURE
  772. RELACIÓN DE LA ESTRUCTURA ANATÓMICA CON LA PERMEABILIDAD Y TASA DE SECADO DE LA MADERA DE PINUS RADIATA D.DON
  773. INFLUENCIA DE LA ESTRUCTURA ANATÓMICA EN LA PERMEABILIDAD ESPECIFICA TRANSVERSAL AL GAS DEL PINO RADIATA
  774. SIMULACIÓN DEL SECADO CONVENCIONAL DE LA MADERA
  775. INFLUENCIA DE LA MADERA JUVENIL DE PINO RADIATA SOBRE LAS PROPIEDADES MECÁNICAS DE TABLEROS OSB
  776. IDENTIFICATION OF WOOD DESTRUCTION DURING DRYING
  777. 14th International Drying Symposium (IDS 2004) Conference Report
  778. FLUIDIZATION BEHAVIOR OF WOOD/SAND MIXTURES
  779. OPTIMIZING AIRFLOW REVERSALS FOR KILN DRYING OF SOFTWOOD TIMBER BY APPLYING MATHEMATICAL MODELS
  780. HEAT PUMPS FOR WOOD DRYING: NEW DEVELOPMENTS AND PRELIMINARY RESULTS
  781. The release of Hydrocarbons from softwood drying: Measurement and modeling
  782. INFLUENCIA DE LA MADERA JUVENIL DE PINUS RADIATA D.DON SOBRE LAS PROPIEDADES FÍSICAS Y MECÁNICAS DE LOS TABLEROS ORIENTED STRAND BOARD (OSB)
  783. CARACTERIZACCIÓN DEL MDF PRODUCIDO A PARTIR DE EUCALIPTO Y ADHESIVO POLIURETANO NATURAL
  784. APPLICATION OF NEUTRON RADIOGRAPHY TO INVESTIGATE CHANGES IN PERMEABILITY IN BACTERIA TREATED PINUS RADIATA TIMBER
  785. BÚSQUEDA DEL CILINDRO NUDOSO EN TROZAS DE PINUS RADIATA D. DON UTILIZANDO IMÁGENES DE CT Y PATRONES DE NUDOS
  786. RESISTENCIA MECÁNICA DE LOS TABLEROS DE DENSIDAD MEDIA: PARTE 2: MODELO POLINOMIAL ORTOGONAL PARA ESTIMAR LA RESISTENCIA A LA FATIGA EN LA TRACCIÓN
  787. MECHANICALLY-INDUCED WOOD WELDING
  788. VARIACIÓN DEL AREA DE PARED CELULAR EN Pinus radiata D. DON
  789. APRECIACIÓN CUANTITATIVA DEL COLOR DE LA MADERA POR COLORIMETRÍA: PARTE 2: MEDICIONES DE LOS CAMBIOS DE COLOR EN PINO RADIATA (PINUS RADIATA) SECADO BAJO UN PROGRAMA CONVENCIONAL ACELERADO
  790. EVALUATION OF A KILN INCORPORATING AN OSCILLATING PLATE AIRFLOW SYSTEM
  791. 8th International IUFRO Wood Drying Conference: Brasov-Romania, August 24-29, 2003
  792. DETECCIÓN DE NUDOS EN MADERA CON TÉCNICAS DE MICROONDAS
  793. PROPIEDADES MECÁNICAS DE ELEMENTOS LAMINADOS CLAVADOS
  794. RESISTENCIA AL ENVEJECIMIENTO DE UNIONES CLAVADAS DE TABLEROS DE HOJUELAS ORIENTADAS (OSB)
  795. CONCERNING THE ELASTIC ORTHOTROPIC MODEL APPLIED TO WOOD ELASTIC PROPERTIES
  796. DESARROLLO DE UN SECADOR A GAS PARA MADERAS DE BAJA PERMEABILIDAD Y PEQUEÑAS PRODUCCIONES MENSUALES
  797. ESTUDIO DEL ANGULO FIBRILAR Y SU RELACION CON LA EDAD CAMBIAL EN Pinus radiata D.DON, PROVENIENTE DE LA SEPTIMA REGION, CHILE
  798. RELATIONSHIP BETWEEN GLOBAL AND LOCAL MODULUS OF ELASTICITY IN BEAMS OF ARGENTINEAN Eucalyptus grandis
  799. ESTUDIO DE COMPUESTOS PLÁSTICO-MADERA: DESARROLLO DE UNA METODOLOGÍA DE EVALUACIÓN DE LA ADHESIÓN INTERFACIAL
  800. CARACTERIZACION MECÁNICA DE MADERA RECONSTITUIDA: MÓDULO DE ELASTICIDAD DE TABLEROS DE PARTÍCULAS DE MADERA EVALUADO CON MÉTODOS NO DESTRUCTIVOS
  801. FABRICACIÓN DE MADERA CONTRAPLACADA CON ADHESIVO POLIURETANO ALTERNATIVO A BASE DE RICINO
  802. SECADO ARTIFICIAL DE DOS HÍBRIDOS COMERCIALES DE POPULUS CRECIDOS EN CHILE
  803. THE EFFECT OF HEAT TREATMENT ON SOME PROPERTIES AND COLOUR IN EUCALYPTUS (Eucalyptus camaldulensis DEHN.) WOOD
  804. MODELACION DE LA CINETICA DEL SECADO CONVENCIONAL DE LA MADERA: APLICACION A DATOS INDUSTRIALES DE UN MODELO FENOMENOLOGICO PARA COIGÜE Y EXPLORACION DE UN MODELO BIDIMENSIONAL
  805. CALCULO ESTRUCTURAL DE MUEBLES
  806. LA TRAYECTORIA CIENTÍFICA DEL Dr. WALTER G. KAUMAN
  807. ESTUDIO DE ELEMENTOS LAMINADOS CLAVADOS PARA LA CONSTRUCCIÓN DE VIVIENDAS DE MADERA EN CHILE
  808. APROVECHAMIENTO DE CHAPA DE CORTAS DIMENSIONES PARA AUMENTAR LA PRODUCCION DE TRIPLAY
  809. RECUERDOS DE LA PERMANENCIA DEL Dr. Walter Kauman EN CHILE
  810. CONTRIBUTION TO THE THEORY OF CELL COLLAPSE IN WOOD: INVESTIGATIONS WITH EUCALYPTUS REGNANS
  811. INFLUENCE OF SAWING ORIENTATION ON MOISTURE MOVEMENT THROUGH SOFTWOOD BOARDS
  812. RELACIÓN ENTRE LAS FUERZAS DE CORTE ORTOGONAL 90-0 EN MADERA DE PINUS RADIATA Y LOS PARÁMETROS DE PROCESOUNA INVESTIGACIÓN PRELIMINAR
  813. VISUALIZACIÓN INTERNA DE NUDOS EN ROLLIZOS DE MADERA DE PINUS RADIATA D. DON UTILIZANDO RAYOS-X
  814. EVALUACIÓN DE SISTEMAS ADHESIVOS DE PVAC A TRAVÉS DE LA TÉCNICA DE FRACTURA MECÁNICA
  815. EVALUACIÓN DE LA RESISTENCIA A LA TRACCIÓN EN ELEMENTOS ESTRUCTURALES DE MADERA CON UNIONES DENTADAS
  816. RESISTENCIA MECANICA DE LOS TABLEROS DE DENSIDAD MEDIA: PARTE 1: RESISTENCIA A LA TRACCION PARALELA A LA SUPERFICIE
  817. TECHNIQUES TO MONITOR DRYING STRESSES AND DIMENSIONAL CHANGES IN TIMBER FROM PLANTATION-GROWN EUCALYPTS FOR KILN SCHEDULE DEVELOPMENT AND KILN CONTROL
  818. BIOLOGICAL CONTROL OF KILN BROWN STAIN IN RADIATA PINE
  819. NONDESTRUCTIVE EVALUATION OF WOOD USING ULTRASONIC TECHNIQUE
  820. LA PARTICIPACION DEL DOCTOR WALTER KAUMAN EN LA CREACION DEL INSTITUTO FORESTAL DE CHILE
  821. MODELACIÓN DEL SECADO CONVENCIONAL DE COIGÜE: PARTE 2: RESULTADOS EXPERIMENTALES
  822. FLUID MIGRATION IN TWO SPECIES OF BEECH (FAGUS SILVATICA AND FAGUS ORIENTALIS): A PERCOLATION MODEL ABLE TO ACCOUNT FOR MACROSCOPIC MEASUREMENTS AND ANATOMICAL OBSERVATIONS
  823. EFECTO DE LA FERTILIZACIÓN A LA PRADERA SOBRE LA FLEXIÓN ESTÁTICA DE Pinus radiata. D. Don
  824. DEFORMACIONES DIFERIDAS EN PROBETAS PEQUEÑAS Y LIBRES DE DEFECTOS DE EUCALYPTUS GRANDIS DE ARGENTINA
  825. EFFECTS OF SAWING PATTERN ON DRYING RATE AND RESIDUAL DRYING STRESSES OF PINUS RADIATA LUMBER
  826. FUNDAMENTAL PHENOMENA IN WOOD RFV DRYING WITH 50-Ohm AMPLIFIER TECHNOLOGY
  827. RETENCIÓN MÍNIMA DE SALES CCA EN MADERA DE PINO RADIATA QUE PROTEGE DEL ATAQUE DE LA TERMITA SUBTERRÁNEA
  828. AESTHETICS APPRECIATION OF WOOD COLOUR AND PATTERNS BY COLORIMETRY: PART 1. COLORIMETRY THEORY FOR THE CIELAB SYSTEM
  829. DESARROLLO DE UN PANEL ESTRUCTURAL PREFABRICADO INCORPORANDO TABLEROS DE HOJUELAS ORIENTADAS (OSB)
  830. MODELACION DEL SECADO DE COIGUE BASADA EN EL COEFICIENTE GLOBAL DE SECADO
  831. DETERMINACION DEL MODULO DE ELASTICIDAD DE LA MADERA MEDIANTE VIBRACIONES TRANSVERSALES
  832. DETERMINACIÓN DE LA MADERA DE COMPRESIÓN EN Pinus radiata D.DON
  833. DETECCION DE NUDOS EN MADERA ASERRADA DE Pinus radiata D. Don POR VISION ARTIFICIAL
  834. UN MODELO MECÁNICO PARA LA CONSOLIDACIÓN DURANTE EL CICLO DE PRENSADO EN TABLEROS DE PARTÍCULAS
  835. RESINAS TERMOENDURECIBLES Y TERMOPLASTICAS: ESTUDIO DEL FRAGUADO IN-SITU EN LA FABRICACION DE TABLEROS MDF Y LAMINADOS
  836. TENSIONES DE CRECIMIENTO EN Eucalyptus globulus DE GALICIA (ESPAÑA): INFLUENCIA DE LA SILVICULTURA Y ESTRATEGIAS DE ASERRADO
  837. USO DE INTELIGENCIA ARTIFICIAL PARA LA OPTIMIZACIÓN DE UN MODELO DE SIMULACIÓN APLICADO A UN PROCESO DE REMANUFACTURA DE PINO RADIATA
  838. MODELACIÓN DEL SECADO CONVENCIONAL DE COIGÜE: Parte 1: Fundamentación teórica
  839. DETERMINACION DE LAS CONSTANTES ELASTICAS EN Pinus radiata D. Don POR ULTRASONIDO: MODULOS DE ELASTICIDAD, MODULOS DE RIGIDEZ Y RAZON DE POISSON
  840. COSTEO DE PRODUCTOS EN LA INDUSTRIA DEL MUEBLE MEDIANTE MÉTODO ABC
  841. PROPIEDADES MECANICAS EN FLEXION DE LA MADERA DE Pinus radiata, CRECIENDO EN UN SISTEMA SILVOPASTORAL: I: ELASTICIDAD Y RESISTENCIA