All Stories

  1. Low-velocity impact of castor oil-based rigid polyurethane foams: Experiments, microstructure effects and constitutive modelling
  2. The bending of 3D-printed bio-inspired sandwich panels with wavy cylinder cores
  3. Moisture ageing effects on the mechanical performance of eco-friendly sandwich panels made of aluminium skins, bamboo ring core and bio-based adhesives
  4. Impact performance of egg‐box core sandwich panels made from sisal fibers and castor‐oil‐based polymer
  5. Double-arrowhead castor-oil biobased polyurethane foam metamaterials
  6. A comparative analysis between hexagonal and circular cells honeycombs based on integral 3D-printed sandwich panels
  7. Sandwich structures of aluminium skins and egg-box-shaped cores made with biobased foam and composites
  8. Multifunctional silicon carbide/cement-based composites for porous aerostatic bearings
  9. Rigid polyurethane foams from commercial castor oil resins
  10. Enhanced core rigidity classifier method (RJS 2.0): A comprehensive approach to properly measure elastic properties of sandwich structures
  11. Life cycle assessment of fibre metal laminates: An ecodesign approach
  12. Assessment of damping and flexural behaviour of hybrid fibre-particulate composites
  13. Castor-oil biobased foam: the effect of the composition on the physical and mechanical properties via a statistical mixture design
  14. Statistical evaluation of three-point bending properties of sustainable aluminium sandwich panels with arched-core geometry
  15. Experimental Study of Drilling Damage Outcomes in Hybrid Composites with Waste Micro-Inclusions
  16. Propriedades físico-mecânicas da madeira de cajueiro estimadas por métodos não destrutivos com base na densidade aparente e frequência natural de vibração
  17. Water aging effects on the flexural properties of fully biobased coir fiber composites
  18. Epoxy-based hybrid composites reinforced with Amazonian Tucumã endocarp and kaolin: A statistical approach to mechanical properties
  19. Comparative Analysis of the Mechanical Performance of Timber Flat Truss Typologies for Different Strength Classes via Optimization Algorithm
  20. Estimation of Flexural Tensile Strength as a Function of Shear of Timber Structures
  21. Influence of Opening Type in Axially Compressed Castellated Columns
  22. Glass and Aramid Fibre-reinforced Bio-based Polymer Composites Manufactured By Vacuum Infusion: A Statistical Approach to Their Physical and Mechanical Properties
  23. Sandwich panels made of aluminium skins and gapped-bamboo ring core
  24. Estimativa das propriedades de flexão estática, dureza e tenacidade de madeiras tropicais brasileiras através de análise de porosimetria por intrusão de mercúrio
  25. Numerical and Experimental Analyses of Hybrid Composites Made from Amazonian Natural Fibers
  26. A Mixture Design of Microconcrete Containing Quartz and Discarded HDPE Particles: Case Study
  27. Tropical wood species: alternative model to determine the characteristic compressive strength perpendicular to grain
  28. Is Cross-Laminated Timber (CLT) a Wood Panel, a Building, or a Construction System? A Systematic Review on Its Functions, Characteristics, Performances, and Applications
  29. Ultrasonic pulse velocity and physical properties of hybrid composites: A statistical approach
  30. CHARACTERISTIC STRENGTHS IN THE COMPRESSION AND IN THE STATIC BENDING AS PARAMETERS TO ESTIMATE CHARACTERISTIC SHEAR STRENGTH FOR TIMBER DESIGN
  31. Fully biobased composite and fiber‐metal laminates reinforced with Cynodon spp. fibers
  32. Modification of short sugarcane bagasse fibres for application in cementitious composites: A statistical approach to mechanical and physical properties
  33. The effect of printing parameters on the tensile properties of bidirectional PLA structures: a statistical approach
  34. Bio-based/green sandwich structures: A review
  35. Residual Mechanical Properties and Durability of High-Strength Concrete with Polypropylene Fibers in High Temperatures
  36. Impact Properties of Novel Natural Fibre Metal Laminated Composite Materials
  37. STATISTICAL AND NUMERICAL APPROACHES OF PARTICULATE REINFORCED POLYMERS AND THEIR EFFECT ON THE INTERLOCKING EFFECT OF HYBRID COMPOSITE JOINTS
  38. Physico-Chemical Characterization of Tropical Wood Species for Use and Production of Grilling Planks
  39. The Effects of Sodium Carbonate and Bicarbonate Treatments on Sisal Fibre Composites
  40. INFLUENCE OF THE TIMBER ELASTIC MODULUS ON THE GEOMETRIC NONLINEAR STRUCTURAL ANALYSIS OF TRUSS ARCHES
  41. Desempenho de painéis de partículas produzidos com resíduos de madeira tratada submetidos ao intemperismo natural
  42. Análise de pisos intertravados com substituição do agregado miúdo por resíduo de construção e demolição
  43. Sandwich Structures Made of Discarded Bottle Caps Core and Hybrid Glass Fibre Composite Skins
  44. Numerical and experimental investigations on sandwich panels made with eco-friendly components under low-velocity impact
  45. Natural Fibres as a Sustainable Reinforcement Constituent in Aligned Discontinuous Polymer Composites Produced by the HiPerDiF Method
  46. Influence of provenance on physical and mechanical properties of Angelim-pedra (Hymenolobium petraeum Ducke.) wood species
  47. Estimativa de propriedades da madeira Mandioqueira pela frequência natural de vibração e pela densidade aparente
  48. INFLUENCE OF REINFORCEMENT ON WOOD TENSILE STRENGTH SUBMITTED TO WEATHERING
  49. Optimal Tensile Properties of Biocomposites Made of Treated Amazonian Curauá Fibres Using Taguchi Method
  50. Sustainable Sandwich Panels Made of Aluminium Skins and Bamboo Rings
  51. Transverse fastening reinforcement of sandwich panels with upcycled bottle caps core
  52. Recycled polyethylene bottle caps as sandwich panel circular honeycomb: Experimental and numerical approach
  53. Hybrid polymer composites made of sugarcane bagasse fibres and disposed rubber particles
  54. Hybrid epoxy composites made from treated curauá fibres and organophilic clay
  55. Painel MDP com resina poliuretana à base de óleo de mamona com adição de cimento
  56. Particleboards from CCB-Treated Pinus sp. Wastes and Castor Oil Resin: Morphology Analyses and Physical–Mechanical Properties
  57. Reuse of iron ore tailings in the production of geopolymer mortars
  58. Assessment of compacted-cementitious composites as porous restrictors for aerostatic bearings
  59. Correlations on Pulse Velocity and Physic-Mechanical Properties of Impact-Compacted Cement Mortar Containing Quartz and Recycled PP Aggregates
  60. Evaluation of the stiffening mechanism based on micro-sized particle inclusions in laminated composites
  61. Investigations on short coir fibre–reinforced composites via full factorial design
  62. Evaluation of hybrid-short-coir-fibre-reinforced composites via full factorial design
  63. The effect of Portland cement inclusions in hybrid glass fibre reinforced composites based on a full factorial design
  64. Hybrid bio-composites reinforced with sisal-glass fibres and Portland cement particles: A statistical approach
  65. Sustainable sandwich structures made from bottle caps core and aluminium skins: A statistical approach
  66. Impact Behaviour of Hybrid Carbon Fibre Composites Reinforced with Silica Micro- and Functionalized Nanoparticles
  67. Effects of sodium carbonate on the performance of epoxy and polyester coir-reinforced composites
  68. Polymer-cementitious composites containing recycled rubber particles
  69. Cementitious Porous Material Applied to Precision Aerostatics Bearings
  70. Hybrid Sandwich Particleboard Made with Sugarcane, Pínus Taeda Thermally Treated and Malva Fibre from Amazon
  71. Apparent shear strength of hybrid glass fibre reinforced composite joints
  72. Sustainable sandwich composite structures made from aluminium sheets and disposed bottle caps
  73. FULL CHARACTERIZATION OF CALYCOPHYLLUM MULTIFLORUM WOOD SPECIE
  74. Hybrid composites reinforced with short sisal fibres and micro ceramic particles
  75. Epoxy mortar timber beam upgrading
  76. Pinus caribaea var. hondurensis Wood Impregnated with Methyl Methacrylate
  77. Novel fibre metal laminate sandwich composite structure with sisal woven core
  78. PHYSICO-MECHANICAL CHARACTERIZATION OF THE Anadenanthera colubrine WOOD SPECIE
  79. TIMBER BEAM REPAIR BASED ON POLYMER-CEMENTITIOUS BLENDS
  80. Hybrid glass fibre reinforced composites containing silica and cement microparticles based on a design of experiment
  81. Carbon nanotubes and superplasticizer reinforcing cementitious composite for aerostatic porous bearing
  82. AVALIAÇÃO NUMÉRICA DO MÓDULO DE ELASTICIDADE EM VIGAS ROLIÇAS DE MADEIRA DA ESPÉCIE Pinus elliottii
  83. Painéis OSB de madeira Pinus sp. e adição de partículas de polipropileno biorientado (BOPP)
  84. Hydration and Dehydration of High Initial Strength Portland Cement Type CP V - ARI
  85. Hybrid silica micro and PDDA/nanoparticles-reinforced carbon fibre composites
  86. New Trends of Sustainable Materials for Civil Engineering
  87. Investigations on the Pozzolanic Effect of Sugar Cane Bagasse Ashes Used in Cementitious Composites
  88. The Influence of Rice Husk Ash Addition on the Properties of Metakaolin-Based Geopolymers
  89. Homogeneous Pinus sp. particle boards reinforced with laminated composite materials
  90. Hybrid auxetic foam and perforated plate composites for human body support
  91. Hybrid composites based on sisal fibers and silica nanoparticles
  92. Replacement of Quartz in Cementitious Composites Using PET Particles: A Statistical Analysis of the Physical and Mechanical Properties
  93. Damage assessment of fibre reinforced laminates
  94. Influence of growth ring orientation of some wood species to obtain toughness
  95. Mechanical properties and ASR evaluation of concrete tiles with waste glass aggregate
  96. Cementitious Composites with Rubber Particles from Recycled Tyres: Physical and Mechanical Properties
  97. Thermoset Polymer Reinforced With Silica Micro and Nanoparticles
  98. Produção de chapas de partículas com resíduos de madeira Cordia goeldiana
  99. Hybrid glass fibre reinforced composites with micro and poly-diallyldimethylammonium chloride (PDDA) functionalized nano silica inclusions
  100. Geometric effects of sustainable auxetic structures integrating the particle swarm optimization and finite element method
  101. Fabricação e caracterização de compósitos a base de cimento com incorporação de poliestireno expandido (isopor)
  102. Machining behaviour of three high-performance engineering plastics
  103. Andreasen Particle Packing Method on the Development of Geopolymer Concrete for Civil Engineering
  104. Epoxy composites containing CFRP powder wastes
  105. Statistical effects of using ceramic particles in glass fibre reinforced composites
  106. Evaluation of modulus of elasticity in static bending of particleboards manufactured with Eucalyptus grandis wood and oat hulls
  107. Alternative methodology for calculating the modulus of elasticity of wooden beams of structural dimensions
  108. Failure analysis and Taguchi design of auxetic recycled rubber structures
  109. Investigations on Wood–Plastic Composites Reinforced With Silica Particles Using Design of Experiment
  110. Investigations on the drilling process of unreinforced and reinforced polyamides using Taguchi method
  111. Módulo de elasticidade em vigas de madeira de dimensões estruturais pelo método dos mínimos quadrados
  112. Painéis de partículas de madeira leucena e resina poliuretana derivada de óleo de mamona
  113. Metodologia alternativa para a determinação do módulo de elasticidade em vigas estruturais de madeira de Pinus caribaea
  114. Recycled glass as potential aggregate for concrete tiles: a statistical analysis of the physical and engineering properties
  115. The effect of silica microparticles and maleic anhydride on the physic-mechanical properties of epoxy matrix phase
  116. Investigations on cementitious composites based on rubber particle waste additions
  117. Hybrid polymeric composites reinforced with sisal fibres and silica microparticles
  118. Drilling Delamination Outcomes on Glass and Sisal Reinforced Plastics
  119. Micromechanical analysis of hybrid composites reinforced with unidirectional natural fibres, silica microparticles and maleic anhydride
  120. Emprego de ferramentas numéricas na avaliação do módulo de elasticidade em vigas roliças de madeira
  121. Analysis of form threads using fluteless taps in cast magnesium alloy (AM60)
  122. Full factorial design analysis of carbon nanotube polymer-cement composites
  123. Preliminary investigations on auxetic structures based on recycled rubber
  124. Statistical design of polymeric composites reinforced with banana fibres and silica microparticles
  125. Evaluation of Compacted Cementitious Composites for Porous Bearings
  126. Incorporação de resíduos de borracha em compósitos de matriz polimérica termorrígida
  127. Physical properties and microstructure of ceramic–polymer composites for restoration works
  128. Development of a three-component dynamometer to measure turning force
  129. The position effect of structural Eucalyptus round timber on the flexural modulus of elasticity
  130. Carbonation durability of blended cement pastes used for waste encapsulation
  131. Influence of stiffness in bolted connections in wooden plane structure of truss type
  132. Numerical evaluation of the modulus of longitudinal elasticity in structural round timber elements of the Eucalyptus genus
  133. Cement - steatite composites reinforced with carbon fibres: an alternative for restoration of brazilian historical buildings
  134. Effect of steatite waste additions on the physical and mechanical properties of clay composites
  135. Effects of high speed in the drilling of glass whisker-reinforced polyamide composites (PA66 GF30): statistical analysis of the roughness parameters
  136. The dielectric response of compacted cementitious composites
  137. The effect of incorporation of steatite wastes on the mechanical properties of cementitious composites
  138. Microstructural design of materials for aerostatic bearings
  139. Physical properties of cement composites designed for aerostatic bearings
  140. Correlation between structure and pulse velocity of cementitious composites