All Stories

  1. Superhydrophobic and Superoleophilic Fiber from Waste Bamboo Processing Residues for Oil/water Selective Separation

    Article • Journal of Wood Chemistry and Technology, September 2019, Taylor & Francis

    Antonio Pizzi

  2. Investigations of mechanical properties and chemical changes occurring during welding of thermally modified ash wood

    Article • Journal of Adhesion Science and Technology, September 2019, Taylor & Francis

    Antonio Pizzi

  3. Glutaraldehyde-wheat gluten protein adhesives for wood bonding

    Article • The Journal of Adhesion, June 2019, Taylor & Francis

    Antonio Pizzi

  4. Some of physical and mechanical properties of particleboard panels bonded with phenol-lignin-glyoxal resin

    Article • The Journal of Adhesion, April 2019, Taylor & Francis

    Antonio Pizzi, hamed younesi

  5. 5-Hydroxymethyl furfural modified melamine glyoxal resin

    Article • The Journal of Adhesion, February 2019, Taylor & Francis

    Antonio Pizzi

  6. Water resistance improvement by polyethyleneimine of tannin-furfuryl alcohol adhesives

    Article • International Wood Products Journal, January 2019, Taylor & Francis

    Ali Abdulkhani , Antonio Pizzi

  7. Comparison of the properties of urea-formaldehyde resins by the use of formalin or urea formaldehyde condensates

    Article • Journal of Adhesion Science and Technology, October 2018, Taylor & Francis

    Professor Nosrat allah Mahmoodi, Prof. Manouchehr Mamaghani, Antonio Pizzi

  8. Furfuryl alcohol-aldehyde plywood adhesive resins

    Article • The Journal of Adhesion, October 2018, Taylor & Francis

    Antonio Pizzi

  9. A comparison between the influence of nanoclay and isocyanate on urea-glyoxal resins

    Article • International Wood Products Journal, December 2017, Taylor & Francis

    Antonio Pizzi

  10. Water resistance of natural joint of spruce produced by linear friction welding without any treatment

    Article • International Wood Products Journal, October 2017, Taylor & Francis

    Antonio Pizzi

  11. Emulsion-templated porous carbon monoliths derived from tannins

    Article • Carbon, August 2014, Elsevier

    Antonio Pizzi

  12. An aqueous extract of Limoniastrum guyonianum gall induces anti-tumor effects in melanoma-injected mice via modulation of the immune response

    Article • Food and Chemical Toxicology, July 2014, Elsevier

    Antonio Pizzi

  13. Limoniastrum guyonianummethanol extract induces immunomodulatory and anti-inflammatory effects by activating cellular anti-oxidant activity

    Article • Drug and Chemical Toxicology, April 2014, Taylor & Francis

    Antonio Pizzi

  14. Investigation of Chemical, Physical and Mechanical Properties of Algerian Date Palm Wood

    Article • Materials Testing, March 2014, Carl Hanser Verlag

    Antonio Pizzi

  15. Flexible‐elastic copolymerized polyurethane‐tannin foams

    Article • Journal of Applied Polymer Science, February 2014, Wiley

    Antonio Pizzi

  16. Comparing environmental impacts of different forest management scenarios for maritime pine biomass production in France

    Article • Journal of Cleaner Production, February 2014, Elsevier

    Antonio Pizzi

  17. Phenol–Formaldehydes

    Article • January 2014, Elsevier

    Antonio Pizzi

  18. Aminos

    Article • January 2014, Elsevier

    Antonio Pizzi

  19. Types, processing and properties of bioadhesives for wood and fibers

    Article • January 2014, Elsevier

    Antonio Pizzi

  20. Pinus pinaster tannin/furanic foams: PART I. Formulation

    Article • Industrial Crops and Products, January 2014, Elsevier

    Antonio Pizzi

  21. Pine tannin based adhesive mixes for plywood

    Article • International Wood Products Journal, December 2013, SAGE Publications

    Antonio Pizzi

  22. Development a new method for pilot scale production of high grade oil palm plywood: Effect of resin content on the mechanical properties, bonding quality and formaldehyde emission of palm plywood

    Article • Materials & Design (1980-2015), December 2013, Elsevier

    Antonio Pizzi

  23. Carbon meringues derived from flavonoid tannins

    Article • Carbon, December 2013, Elsevier

    Antonio Pizzi

  24. Wood Joints Adhesion and Performance in Mechanical Friction Welding of Wood without Adhesives

    Article • November 2013, Taylor & Francis

    Antonio Pizzi

  25. Synthesis and physicochemical properties of hydroxypropyl tannins from maritime pine bark (Pinus pinaster Ait.)

    Article • Holzforschung, November 2013, De Gruyter

    Antonio Pizzi

  26. Improving Hot-Water Resistance of Melamine-Urea-Formaldehyde by Addition of PolyFox PF-151N Polymer

    Article • The Journal of Adhesion, November 2013, Taylor & Francis

    Antonio Pizzi

  27. Fast Pressing Composite Using Tannin-Furfuryl Alcohol Resin and Vegetal Fibers Reinforcement

    Article • JOURNAL OF RENEWABLE MATERIALS, November 2013, Scrivener Publishing

    Antonio Pizzi

  28. Characterization of two maritime pine tannins as wood adhesives

    Article • Journal of Adhesion Science and Technology, November 2013, Taylor & Francis

    Antonio Pizzi

  29. Performance of MUF resins for particleboard before and after spray-drying

    Article • Journal of Adhesion Science and Technology, October 2013, Taylor & Francis

    Antonio Pizzi

  30. Fabrication and mechanical analysis of mimosa tannin and commercial flax fibers biocomposites

    Article • Journal of Adhesion Science and Technology, October 2013, Taylor & Francis

    Antonio Pizzi

  31. The influence of forest management systems on the environmental impacts for Douglas-fir production in France

    Article • The Science of The Total Environment, September 2013, Elsevier

    Antonio Pizzi

  32. Hydroxypropyl tannin derivatives from Pinus pinaster (Ait.) bark

    Article • Industrial Crops and Products, August 2013, Elsevier

    Antonio Pizzi

  33. Characterization of Pinus brutia bark tannin by MALDI-TOF MS and 13C NMR

    Article • Industrial Crops and Products, August 2013, Elsevier

    Antonio Pizzi

  34. Tannin/furanic foams without blowing agents and formaldehyde

    Article • Industrial Crops and Products, August 2013, Elsevier

    Antonio Pizzi

  35. MALDI-TOF and 13C NMR analysis of a renewable resource additive—Thermoplastic acetylated tannins

    Article • Industrial Crops and Products, August 2013, Elsevier

    Antonio Pizzi

  36. Particleboards production from date palm biomass

    Article • European Journal of Wood and Wood Products, July 2013, Springer Science + Business Media

    Antonio Pizzi

  37. Mayonnaise, whipped cream and meringue, a new carbon cuisine

    Article • Carbon, July 2013, Elsevier

    Antonio Pizzi

  38. Wood–bamboo–wood laminated composite lumber jointed by linear vibration–friction welding

    Article • European Journal of Wood and Wood Products, June 2013, Springer Science + Business Media

    Antonio Pizzi

  39. Tannin–resorcinol–aldehyde cold-set wood adhesives with only formaldehyde as hardener

    Article • European Journal of Wood and Wood Products, May 2013, Springer Science + Business Media

    Antonio Pizzi

  40. Parameter scanning for linear welding of Brazilian Eucalyptus benthamii wood

    Article • European Journal of Wood and Wood Products, May 2013, Springer Science + Business Media

    Antonio Pizzi

  41. Phenolic resin wood panel adhesives based on chestnut (Castanea sativa) hydrolysable tannins

    Article • International Wood Products Journal, May 2013, SAGE Publications

    Antonio Pizzi

  42. Mechanical properties of heat-treated organic foams

    Article • Physical Review E, March 2013, American Physical Society (APS)

    Antonio Pizzi

  43. Multifunctional porous solids derived from tannins

    Article • Journal of Physics Conference Series, March 2013, Institute of Physics Publishing

    Antonio Pizzi

  44. New families of carbon gels based on natural resources

    Article • Journal of Physics Conference Series, March 2013, Institute of Physics Publishing

    Antonio Pizzi

  45. Wood blockboards for construction fabricated by wood welding with pre-oiled dowels

    Article • Journal of Adhesion Science and Technology, March 2013, Taylor & Francis

    Antonio Pizzi

  46. Structure and oxidation resistance of micro-cellular Si–SiC foams derived from natural resins

    Article • Ceramics International, March 2013, Elsevier

    Antonio Pizzi

  47. Systematic studies of tannin–formaldehyde aerogels: preparation and properties

    Article • Science and Technology of Advanced Materials, February 2013, Taylor & Francis

    Antonio Pizzi

  48. Isolation and characterization of lignin from Moroccan sugar cane bagasse: Production of lignin–phenol-formaldehyde wood adhesive

    Article • Industrial Crops and Products, February 2013, Elsevier

    Antonio Pizzi

  49. Mechanical characterization of industrial particleboard panels glued with cornstarch–mimosa tannin–urea formaldehyde resins

    Article • Journal of Adhesion Science and Technology, February 2013, Taylor & Francis

    Antonio Pizzi

  50. Bioadhesives for Wood and Fibres

    Article • Reviews of Adhesion and Adhesives, February 2013, Scrivener Publishing

    Antonio Pizzi

  51. Bioresourced pine tannin/furanic foams with glyoxal and glutaraldehyde

    Article • Industrial Crops and Products, February 2013, Elsevier

    Antonio Pizzi

  52. Improving UF particleboard adhesives water resistance by small albumin and sunflower oil additions

    Article • European Journal of Wood and Wood Products, January 2013, Springer Science + Business Media

    Antonio Pizzi

  53. Corn flour-mimosa tannin-based adhesives without formaldehyde for interior particleboard production

    Article • Wood Science and Technology, January 2013, Springer Science + Business Media

    Antonio Pizzi

  54. Natural tannin–furanic thermosetting moulding plastics

    Article • RSC Advances, January 2013, Royal Society of Chemistry

    Antonio Pizzi

  55. Evaluation of mechanical and physical properties of industrial particleboard bonded with a corn flour–urea formaldehyde adhesive

    Article • Composites Part B Engineering, January 2013, Elsevier

    Antonio Pizzi

  56. Exploratory results for composites of natural fibres mats with a natural matrix of epoxidized vegetable oils

    Article • Journal of Adhesion Science and Technology, January 2013, Taylor & Francis

    Antonio Pizzi

  57. New tannin–lignin aerogels

    Article • Industrial Crops and Products, January 2013, Elsevier

    Antonio Pizzi

  58. Reaction of condensed tannins with ammonia

    Article • Industrial Crops and Products, January 2013, Elsevier

    Antonio Pizzi

  59. CAUSES OF THE WATER RESISTANCE OF WELDED JOINTS OF PADUK WOOD

    Article • JOURNAL OF RENEWABLE MATERIALS, December 2012, Scrivener Publishing

    Antonio Pizzi

  60. Electromagnetic shielding efficiency in Ka-band: carbon foam versus epoxy/carbon nanotube composites

    Article • Journal of Nanophotonics, December 2012, SPIE

    Antonio Pizzi, Sergey Maksimenko

  61. Mimosa tannin resins for impregnated paper overlays

    Article • European Journal of Wood and Wood Products, December 2012, Springer Science + Business Media

    Antonio Pizzi

  62. Condensed tannins from grape pomace: Characterization by FTIR and MALDI TOF and production of environment friendly wood adhesive

    Article • Industrial Crops and Products, November 2012, Elsevier

    Antonio Pizzi

  63. Characterization of pomegranate peels tannin extractives

    Article • Industrial Crops and Products, November 2012, Elsevier

    Antonio Pizzi

  64. MALDI-TOF, HPLC-ESI-TOF and 13C-NMR characterization of chestnut (Castanea sativa) shell tannins for wood adhesives

    Article • Wood Science and Technology, October 2012, Springer Science + Business Media

    Antonio Pizzi

  65. Highly porous conducting carbon foams for electromagnetic applications

    Article • September 2012, Institute of Electrical & Electronics Engineers (IEEE)

    Antonio Pizzi, Sergey Maksimenko

  66. Radiative properties of tannin-based, glasslike, carbon foams

    Article • Carbon, September 2012, Elsevier

    Antonio Pizzi

  67. Enhancing MUF particleboard adhesives performance by glutaraldehyde addition

    Article • European Journal of Wood and Wood Products, August 2012, Springer Science + Business Media

    Antonio Pizzi

  68. “Blue glue”: A new precursor of carbon aerogels

    Article • Microporous and Mesoporous Materials, August 2012, Elsevier

    Antonio Pizzi

  69. Tannin-furfuryl alcohol wood panel adhesives without formaldehyde

    Article • European Journal of Wood and Wood Products, July 2012, Springer Science + Business Media

    Antonio Pizzi

  70. MALDI‐TOF‐CID for the microstructure elucidation of polymeric hydrolysable tannins

    Article • Journal of Applied Polymer Science, June 2012, Wiley

    Antonio Pizzi

  71. Influence of Machine Setting and Wood Parameters on Crack Formation in Scots Pine Joints Produced by Linear Friction Welding

    Article • Journal of Adhesion Science and Technology, May 2012, Taylor & Francis

    Antonio Pizzi

  72. Industrial production of pine tannin-bonded particleboard and MDF

    Article • European Journal of Wood and Wood Products, May 2012, Springer Science + Business Media

    Antonio Pizzi

  73. Microstructure elucidation of polyflavonoid tannins by MALDI‐TOF‐CID

    Article • Journal of Applied Polymer Science, May 2012, Wiley

    Antonio Pizzi

  74. Tailoring the structure of cellular vitreous carbon foams

    Article • Carbon, April 2012, Elsevier

    Antonio Pizzi

  75. Pore structure and electrochemical performances of tannin-based carbon cryogels

    Article • Biomass and Bioenergy, April 2012, Elsevier

    Antonio Pizzi

  76. Impact of depressurizing rate on the porosity of aerogels

    Article • Microporous and Mesoporous Materials, April 2012, Elsevier

    Antonio Pizzi

  77. Chemistry, Morphology, Microtomography and Activation of Natural and Carbonized Tannin Foams for Different Applications

    Article • Macromolecular Symposia, March 2012, Wiley

    Antonio Pizzi

  78. Tannin-boron preservatives for wood buildings: mechanical and fire properties

    Article • European Journal of Wood and Wood Products, March 2012, Springer Science + Business Media

    Antonio Pizzi

  79. Mechanical behaviour and 3D stress analysis of multi-layered wooden beams made with welded-through wood dowels

    Article • Composite Structures, January 2012, Elsevier

    Antonio Pizzi

  80. Highly mesoporous organic aerogels derived from soy and tannin

    Article • Green Chemistry, January 2012, Royal Society of Chemistry

    Antonio Pizzi

  81. Chemical Modification of Tannin/Furanic Rigid Foams by Isocyanates and Polyurethanes

    Article • Maderas Ciencia y tecnología, January 2012, SciELO Comision Nacional de Investigacion Cientifica Y Tecnologica (CONICYT)

    Antonio Pizzi, Maderas. Ciencia y Tecnologia

  82. Extraction of Polyphenolics from Lignocellulosic Materials and Agricultural Byproducts for the Formulation of Resin for Wood Adhesives

    Article • Journal of Biobased Materials and Bioenergy, December 2011, American Scientific Publishers

    Antonio Pizzi

  83. Condensed tannins extraction from grape pomace: Characterization and utilization as wood adhesives for wood particleboard

    Article • Industrial Crops and Products, July 2011, Elsevier

    Antonio Pizzi

  84. The use of tannin to prepare carbon gels. Part II. Carbon cryogels

    Article • Carbon, July 2011, Elsevier

    Antonio Pizzi

  85. The use of tannin to prepare carbon gels. Part I: Carbon aerogels

    Article • Carbon, July 2011, Elsevier

    Antonio Pizzi

  86. Bimodal activated carbons derived from resorcinol-formaldehyde cryogels

    Article • Science and Technology of Advanced Materials, June 2011, Taylor & Francis

    Antonio Pizzi

  87. Flammability assessment of tannin-based cellular materials

    Article • Polymer Degradation and Stability, April 2011, Elsevier

    Antonio Pizzi

  88. Natural Lignans as Adhesives for Cellulose: Computational Interaction Energy vs Experimental Results

    Article • January 2011, Taylor & Francis

    Antonio Pizzi

  89. Chemical Changes Induced by High-Speed Rotation Welding of Wood — Application to Two Canadian Hardwood Species

    Article • January 2011, Taylor & Francis

    Antonio Pizzi

  90. Formaldehyde-Free Dimethoxyethanal-Derived Resins for Wood-Based Panels

    Article • January 2011, Taylor & Francis

    Antonio Pizzi

  91. Acrylated Epoxidized Soy Oil as an Alternative to Urea-Formaldehyde in Making Wheat Straw Particleboards

    Article • January 2011, Taylor & Francis

    Antonio Pizzi

  92. Properties Enhancement of Oil Palm Plywood through Veneer Pretreatment with Low Molecular Weight Phenol-Formaldehyde Resin

    Article • January 2011, Taylor & Francis

    Antonio Pizzi

  93. Characterization of Urea-Formaldehyde Resins by GPC/SEC and HPLC Techniques: Effect of Ageing

    Article • January 2011, Taylor & Francis

    Antonio Pizzi

  94. Natural Lignans as Adhesives for Cellulose

    Article • January 2011, Taylor & Francis

    Antonio Pizzi

  95. Gluten Protein Adhesives for Wood Panels

    Article • January 2011, Taylor & Francis

    Antonio Pizzi

  96. Bonding of Heat-Treated Spruce with Phenol-Formaldehyde Adhesive

    Article • January 2011, Taylor & Francis

    Antonio Pizzi

  97. Extraction of condensed tannins from grape pomace for use as wood adhesives

    Article • Industrial Crops and Products, January 2011, Elsevier

    Antonio Pizzi

  98. Magnetic Resonance Imaging of Water Distribution in Welded Woods

    Article • Journal of Adhesion Science and Technology, January 2011, Taylor & Francis

    Antonio Pizzi

  99. Shear Refinement of Formaldehyde-Free Corn Starch and Mimosa Tannin (Acacia mearnsii) Wood Adhesives

    Article • Journal of Adhesion Science and Technology, January 2011, Taylor & Francis

    Antonio Pizzi

  100. Extraction, Characterization and Utilization of Organosolv Miscanthus Lignin for the Conception of Environmentally Friendly Mixed Tannin/Lignin Wood Resins

    Article • Journal of Adhesion Science and Technology, January 2011, Taylor & Francis

    Antonio Pizzi

  101. Influence of Weldling Parameters on Weldline Density and Its Relation to Crack Formation in Welded Scots Pine Joints

    Article • Journal of Adhesion Science and Technology, January 2011, Taylor & Francis

    Antonio Pizzi

  102. Influence of Welding Parameters and Wood Properties on the Water Absorption in Scots Pine Joints Induced by Linear Welding

    Article • Journal of Adhesion Science and Technology, January 2011, Taylor & Francis

    Antonio Pizzi

  103. Extraction de la lignine deMiscanthus x Giganteuspour la production d’adhésifs pour le matériau bois

    Article • Matériaux & Techniques, January 2011, EDP Sciences

    Antonio Pizzi

  104. Condensed tannin reactivity inhibition by internal rearrangements: Detection by CP-MAS 13C NMR

    Article • Maderas Ciencia y tecnología, January 2011, SciELO Comision Nacional de Investigacion Cientifica Y Tecnologica (CONICYT)

    Antonio Pizzi, Maderas. Ciencia y Tecnologia

  105. Structure and electrochemical capacitance of carbon cryogels derived from phenol–formaldehyde resins

    Article • Carbon, November 2010, Elsevier

    Antonio Pizzi

  106. Mechanical potential of eco-OSB produced from durable and nondurable species and natural resins

    Article • Holzforschung, October 2010, De Gruyter

    Antonio Pizzi

  107. MALDI-TOF and 13C NMR characterization of maritime pine industrial tannin extract

    Article • Industrial Crops and Products, September 2010, Elsevier

    Antonio Pizzi

  108. End-grain butt joints obtained by friction welding of high density eucalyptus wood

    Article • Wood Science and Technology, June 2010, Springer Science + Business Media

    Antonio Pizzi

  109. Effect of layers relative moisture content on the IB strength of pine tannin bonded particleboard

    Article • European Journal of Wood and Wood Products, June 2010, Springer Science + Business Media

    Antonio Pizzi

  110. Bimodal cellular activated carbons derived from tannins

    Article • Journal of Materials Science, June 2010, Springer Science + Business Media

    Antonio Pizzi

  111. Characterization of Acacia mangium polyflavonoid tannins by MALDI-TOF mass spectrometry and CP-MAS 13C NMR

    Article • European Polymer Journal, June 2010, Elsevier

    Antonio Pizzi

  112. Mechanical properties of tannin-based rigid foams undergoing compression

    Article • Materials Science and Engineering A, June 2010, Elsevier

    Antonio Pizzi

  113. Cornstarch–mimosa tannin–urea formaldehyde resins as adhesives in the particleboard production

    Article • Starch - Stärke, April 2010, Wiley

    Antonio Pizzi

  114. Chemical activation of tannin–furanic carbon foams

    Article • Industrial Crops and Products, March 2010, Elsevier

    Antonio Pizzi

  115. FRIENDLY WOOD PRESERVATIVE SYSTEM BASED ON POLYMERIZED TANNIN RESIN-BORIC ACID FOR OUTDOOR APPLICATIONS

    Article • Maderas Ciencia y tecnología, January 2010, SciELO Comision Nacional de Investigacion Cientifica Y Tecnologica (CONICYT)

    Antonio Pizzi, Maderas. Ciencia y Tecnologia

  116. Moisture Sensitivity of Scots Pine Joints Produced by Linear Frictional Welding

    Article • Journal of Adhesion Science and Technology, January 2010, Taylor & Francis

    Antonio Pizzi

  117. PREPARATION AND MECHANICAL CHARACTERIZATION OF PARTICLEBOARD MADE FROM MARITIME PINE AND GLUED WITH BIO-ADHESIVES BASED ON CORNSTARCH AND TANNINS

    Article • Maderas Ciencia y tecnología, January 2010, SciELO Comision Nacional de Investigacion Cientifica Y Tecnologica (CONICYT)

    Antonio Pizzi, Maderas. Ciencia y Tecnologia

  118. Evaluation of Some Synthetic Oligolignols as Adhesives: A Molecular Docking Study

    Article • Journal of Adhesion Science and Technology, January 2010, Taylor & Francis

    Antonio Pizzi

  119. Guest Editorial

    Article • Journal of Adhesion Science and Technology, January 2010, Taylor & Francis

    Antonio Pizzi

  120. Characterization of a formaldehyde-free cornstarch-tannin wood adhesive for interior plywood

    Article • European Journal of Wood and Wood Products, December 2009, Springer Science + Business Media

    Antonio Pizzi

  121. Tannin-based rigid foams: A survey of chemical and physical properties

    Article • Bioresource Technology, November 2009, Elsevier

    Antonio Pizzi

  122. Cornstarch and tannin in phenol–formaldehyde resins for plywood production

    Article • Industrial Crops and Products, September 2009, Elsevier

    Antonio Pizzi

  123. Erratum to ‘Tannin-based carbon foam’ [Carbon 47 (2009) 1480–1492]

    Article • Carbon, September 2009, Elsevier

    Antonio Pizzi

  124. High resin content natural matrix–natural fibre biocomposites

    Article • Industrial Crops and Products, September 2009, Elsevier

    Antonio Pizzi

  125. Comparative Properties of Agrofiber Based Particle Boards Using Newly Developed Bonding Materials

    Article • Journal of Biobased Materials and Bioenergy, September 2009, American Scientific Publishers

    Antonio Pizzi

  126. X-Ray Microtomography Studies of Tannin-Derived Organic and Carbon Foams

    Article • Microscopy and Microanalysis, August 2009, Oxford University Press (OUP)

    Antonio Pizzi

  127. Handbook of Sealant Technology

    Article • August 2009, Taylor & Francis

    Antonio Pizzi

  128. Development and optimization of a new formaldehyde-free cornstarch and tannin wood adhesive

    Article • European Journal of Wood and Wood Products, August 2009, Springer Science + Business Media

    Antonio Pizzi

  129. Characterization and performance of Rhizophora apiculata mangrove polyflavonoid tannins in the adsorption of copper (II) and lead (II)

    Article • Industrial Crops and Products, July 2009, Elsevier

    Antonio Pizzi

  130. On the performance of a melamine–urea–formaldehyde resin for decorative paper coatings

    Article • European Journal of Wood and Wood Products, June 2009, Springer Science + Business Media

    Antonio Pizzi

  131. Influence of grain direction and pre-heating on linear wood welding

    Article • European Journal of Wood and Wood Products, May 2009, Springer Science + Business Media

    Antonio Pizzi

  132. Colourless formaldehyde-free urea resin adhesives for wood panels

    Article • European Journal of Wood and Wood Products, May 2009, Springer Science + Business Media

    Antonio Pizzi

  133. Polyflavonoid Tannins Self-Condensation Adhesives for Wood Particleboard

    Article • The Journal of Adhesion, May 2009, Taylor & Francis

    Antonio Pizzi

  134. Tannin-based carbon foams

    Article • Carbon, May 2009, Elsevier

    Antonio Pizzi

  135. Linear welding of grooved wood surfaces

    Article • European Journal of Wood and Wood Products, April 2009, Springer Science + Business Media

    Antonio Pizzi

  136. Tannin-based rigid foams: Characterization and modification

    Article • Industrial Crops and Products, March 2009, Elsevier

    Antonio Pizzi

  137. Metal adsorption of tannin based rigid foams

    Article • Industrial Crops and Products, March 2009, Elsevier

    Antonio Pizzi

  138. Honeymoon fast-set adhesives for glulam and fingerjoints of higher natural materials content

    Article • European Journal of Wood and Wood Products, February 2009, Springer Science + Business Media

    Antonio Pizzi

  139. Evaluation of decay resistance of wood products made from borax-impregnated wood and bonded with a formaldehyde-free cornstarch and tannin adhesive

    Article • Annals of Forest Science, January 2009, Springer Science + Business Media

    Antonio Pizzi

  140. High performance tannin resin-boron wood preservatives for outdoor end-uses

    Article • European Journal of Wood and Wood Products, December 2008, Springer Science + Business Media

    Antonio Pizzi

  141. Formaldehyde‐free aminoresin wood adhesives based on dimethoxyethanal

    Article • Journal of Applied Polymer Science, September 2008, Wiley

    Antonio Pizzi

  142. MALDI-ToF investigation of furanic polymer foams before and after carbonization: Aromatic rearrangement and surviving furanic structures

    Article • European Polymer Journal, September 2008, Elsevier

    Antonio Pizzi

  143. Analysis of gases emitted during carbonization degradation of polyflavonoid tannin/furanic rigid foams

    Article • Polymer Degradation and Stability, August 2008, Elsevier

    Antonio Pizzi

  144. Synthesis–structure–performance relationship of cocondensed phenol–urea–formaldehyde resins by MALDI‐ToF and 13C NMR

    Article • Journal of Applied Polymer Science, July 2008, Wiley

    Antonio Pizzi

  145. Flocculation of cellulose fibre suspensions: the contribution of percolation and effective-medium theories

    Article • Cellulose, May 2008, Springer Science + Business Media

    Antonio Pizzi

  146. Influence of nanoclay on urea‐formaldehyde resins for wood adhesives and its model

    Article • Journal of Applied Polymer Science, May 2008, Wiley

    Antonio Pizzi

  147. Structure degradation, conservation and rearrangement in the carbonisation of polyflavonoid tannin/furanic rigid foams – A MALDI-TOF investigation

    Article • Polymer Degradation and Stability, May 2008, Elsevier

    Antonio Pizzi

  148. Study on the structure of mangrove polyflavonoid tannins with MALDI‐TOF mass spectrometry

    Article • Journal of Applied Polymer Science, April 2008, Wiley

    Antonio Pizzi

  149. Emission of gases and degradation volatiles from polymeric wood constituents in friction welding of wood dowels

    Article • Polymer Degradation and Stability, April 2008, Elsevier

    Antonio Pizzi

  150. Dependence of dowel welding on rotation rate

    Article • European Journal of Wood and Wood Products, February 2008, Springer Science + Business Media

    Antonio Pizzi

  151. Environment‐friendly soy flour‐based resins without formaldehyde

    Article • Journal of Applied Polymer Science, January 2008, Wiley

    Antonio Pizzi

  152. Tannins: Major Sources, Properties and Applications

    Article • January 2008, Elsevier

    Antonio Pizzi

  153. NATURAL TANNIN-BASED RIGID FOAMS AS INSULATION FOR DOORS AND WALL PANELS

    Article • Maderas Ciencia y tecnología, January 2008, SciELO Comision Nacional de Investigacion Cientifica Y Tecnologica (CONICYT)

    Antonio Pizzi, Maderas. Ciencia y Tecnologia

  154. Weather exposure durability of welded dowel joints

    Article • European Journal of Wood and Wood Products, December 2007, Springer Science + Business Media

    Antonio Pizzi

  155. Bonding performance of heat treated wood with structural adhesives

    Article • European Journal of Wood and Wood Products, December 2007, Springer Science + Business Media

    Antonio Pizzi

  156. Environmentally friendly mixed tannin/lignin wood resins

    Article • Journal of Applied Polymer Science, September 2007, Wiley

    Antonio Pizzi

  157. Testing by fourier transform infrared species variation during melamine–urea–formaldehyde resin preparation

    Article • Journal of Applied Polymer Science, July 2007, Wiley

    Antonio Pizzi

  158. Leachability and termite resistance of wood treated with a new preservative: ammonium borate oleate

    Article • European Journal of Wood and Wood Products, July 2007, Springer Science + Business Media

    Antonio Pizzi

  159. Fluorinated polyether additives to improve the performance of urea–formaldehyde adhesives for wood panels

    Article • Journal of Applied Polymer Science, July 2007, Wiley

    Antonio Pizzi

  160. Microcrystallinity and colloidal peculiarities of UF/isocyanate hybrid resins

    Article • Journal of Applied Polymer Science, February 2007, Wiley

    Antonio Pizzi

  161. Full-scale industrial wood floor assembly and structures by welded-through dowels

    Article • European Journal of Wood and Wood Products, February 2007, Springer Science + Business Media

    Antonio Pizzi

  162. Recycled micronized polyurethane powders as active extenders of UF and PF wood panel adhesives

    Article • European Journal of Wood and Wood Products, February 2007, Springer Science + Business Media

    Antonio Pizzi

  163. Effect of an oil heat treatment on the teachability and biological resistance of boric acid impregnated wood

    Article • Annals of Forest Science, January 2007, Springer Science + Business Media

    Antonio Pizzi

  164. Lignin‐based polycondensation resins for wood adhesives

    Article • Journal of Applied Polymer Science, November 2006, Wiley

    Antonio Pizzi

  165. Thermal stability of structural one‐component polyurethane adhesives for wood—structure‐property relationship

    Article • Journal of Applied Polymer Science, September 2006, Wiley

    Antonio Pizzi

  166. Urea–formaldehyde–propionaldehyde physical gelation resins for improved swelling in water

    Article • Journal of Applied Polymer Science, September 2006, Wiley

    Antonio Pizzi

  167. Edge and face linear vibration welding of wood panels

    Article • European Journal of Wood and Wood Products, August 2006, Springer Science + Business Media

    Antonio Pizzi

  168. Lignin-based wood panel adhesives without formaldehyde

    Article • European Journal of Wood and Wood Products, August 2006, Springer Science + Business Media

    Antonio Pizzi

  169. Parameters of wood welding: A study with infrared thermography

    Article • Holzforschung, July 2006, De Gruyter

    Antonio Pizzi

  170. Structure–property relationships in one‐component polyurethane adhesives for wood: Sensitivity to low moisture content

    Article • Journal of Applied Polymer Science, June 2006, Wiley

    Antonio Pizzi

  171. Correlation of 13C‐NMR analysis with fungal decay tests of polymeric structural wood constituents. I. Basidiomycetes

    Article • Journal of Applied Polymer Science, May 2006, Wiley

    Antonio Pizzi

  172. Variation of MUF and PMUF resins mass fractions during preparation

    Article • Journal of Applied Polymer Science, March 2006, Wiley

    Antonio Pizzi

  173. Ester acceleration mechanisms in phenol–formaldehyde resin adhesives

    Article • Journal of Applied Polymer Science, February 2006, Wiley

    Antonio Pizzi

  174. Colloidal aggregation of aminoplastic polycondensation resins: Urea–formaldehyde versus melamine–formaldehyde and melamine–urea–formaldehyde resins

    Article • Journal of Applied Polymer Science, January 2006, Wiley

    Antonio Pizzi

  175. The reaction in water of UF resins with isocyanates at short curing times: A 13C NMR investigation

    Article • Journal of Applied Polymer Science, January 2006, Wiley

    Antonio Pizzi

  176. Coreacting PMUF/isocyanate resins for wood panel adhesives

    Article • European Journal of Wood and Wood Products, January 2006, Springer Science + Business Media

    Antonio Pizzi

  177. The effects of a two stage heat treatment process on the properties of particleboard

    Article • European Journal of Wood and Wood Products, January 2006, Springer Science + Business Media

    Antonio Pizzi

  178. Welding-through doweling of wood panels

    Article • European Journal of Wood and Wood Products, January 2006, Springer Science + Business Media

    Antonio Pizzi

  179. Optimising the properties of OSB by a one-step heat pre-treatment process

    Article • European Journal of Wood and Wood Products, December 2005, Springer Science + Business Media

    Antonio Pizzi

  180. Wood welding: A challenging alternative to conventional wood gluing

    Article • Scandinavian Journal of Forest Research, December 2005, Taylor & Francis

    Antonio Pizzi

  181. Non-toxic, zero emission tannin-glyoxal adhesives for wood panels

    Article • European Journal of Wood and Wood Products, November 2005, Springer Science + Business Media

    Antonio Pizzi

  182. 13C NMR investigation of the reaction in water of UF resins with blocked emulsifiable isocyanates

    Article • Journal of Applied Polymer Science, October 2005, Wiley

    Antonio Pizzi

  183. Improved water resistance of UF adhesives for plywood by small pMDI additions

    Article • European Journal of Wood and Wood Products, October 2005, Springer Science + Business Media

    Antonio Pizzi

  184. Temperature and density distribution in mechanical vibration wood welding

    Article • Wood Science and Technology, October 2005, Springer Science + Business Media

    Antonio Pizzi

  185. Green wood gluing by traditional honeymoon PRF adhesives

    Article • European Journal of Wood and Wood Products, July 2005, Springer Science + Business Media

    Antonio Pizzi

  186. Surface finishes by mechanically induced wood surface fusion

    Article • European Journal of Wood and Wood Products, May 2005, Springer Science + Business Media

    Antonio Pizzi

  187. One‐component polyurethane adhesives for green wood gluing: Structure and temperature‐dependent creep

    Article • Journal of Applied Polymer Science, March 2005, Wiley

    Antonio Pizzi

  188. Influence of grain direction in vibrational wood welding

    Article • Holzforschung, January 2005, De Gruyter

    Antonio Pizzi

  189. PUF panel adhesives doped with additional urea and reinforced by isocyanates

    Article • European Journal of Wood and Wood Products, November 2004, Springer Science + Business Media

    Antonio Pizzi

  190. Dependance on the adhesive formulation of the upgrading of MUF particleboard adhesives and decrease of melamine content by buffer and additives

    Article • European Journal of Wood and Wood Products, November 2004, Springer Science + Business Media

    Antonio Pizzi

  191. Recycling melamine-impregnated paper waste as board adhesives

    Article • European Journal of Wood and Wood Products, October 2004, Springer Science + Business Media

    Antonio Pizzi

  192. Fast pressing of thick biodegradable lightweight boards

    Article • European Journal of Wood and Wood Products, June 2004, Springer Science + Business Media

    Antonio Pizzi

  193. Structure of resorcinol, phenol, and furan resins by MALDI‐TOF mass spectrometry and 13C NMR

    Article • Journal of Applied Polymer Science, March 2004, Wiley

    Antonio Pizzi

  194. Solid wood joints by in situ welding of structural wood constituents

    Article • Holzforschung, February 2004, De Gruyter

    Antonio Pizzi

  195. Low‐volatility acetals to upgrade the performance of melamine–urea–formaldehyde wood adhesive resins

    Article • Journal of Applied Polymer Science, February 2004, Wiley

    Antonio Pizzi

  196. Wood bonding by mechanically‐induced in situ welding of polymeric structural wood constituents

    Article • Journal of Applied Polymer Science, February 2004, Wiley

    Antonio Pizzi

  197. UV spectrophotometric method for polyphenolic tannin analysis

    Article • Journal of Applied Polymer Science, December 2003, Wiley

    Antonio Pizzi

  198. Colloidal aggregation of MUF polycondensation resins: Formulation influence and storage stability

    Article • Journal of Applied Polymer Science, December 2003, Wiley

    Antonio Pizzi

  199. Variation of acetal effect on performance of phenol–formaldehyde resin adhesives

    Article • Journal of Applied Polymer Science, December 2003, Wiley

    Antonio Pizzi

  200. Acetals-induced strength increases and lower resin content in MUF and PE wood adhesives

    Article • European Journal of Wood and Wood Products, December 2003, Springer Science + Business Media

    Antonio Pizzi

  201. Polyborate ions? influence on the durability of wood treated with non-toxic protein borate preservatives

    Article • European Journal of Wood and Wood Products, December 2003, Springer Science + Business Media

    Antonio Pizzi

  202. Tannin antioxidant characteristics in leather versus leather light stability: Models

    Article • Journal of Applied Polymer Science, November 2003, Wiley

    Antonio Pizzi

  203. Handbook of Adhesive Technology, Revised and Expanded

    Article • August 2003, Taylor & Francis

    Antonio Pizzi

  204. Unsaturated Polyester Adhesives

    Article • August 2003, Taylor & Francis

    Antonio Pizzi

  205. Hot-Melt Adhesives

    Article • August 2003, Taylor & Francis

    Antonio Pizzi

  206. Urea–Formaldehyde Adhesives

    Article • August 2003, Taylor & Francis

    Antonio Pizzi

  207. Melamine–Formaldehyde Adhesives

    Article • August 2003, Taylor & Francis

    Antonio Pizzi

  208. Natural Phenolic Adhesives II

    Article • August 2003, Taylor & Francis

    Antonio Pizzi

  209. Phenolic Resin Adhesives

    Article • August 2003, Taylor & Francis

    Antonio Pizzi

  210. Natural Phenolic Adhesives I

    Article • August 2003, Taylor & Francis

    Antonio Pizzi

  211. Tailoring Adhesion of Adhesive Formulations by Molecular Mechanics/Dynamics

    Article • August 2003, Taylor & Francis

    Antonio Pizzi

  212. Principles of Polymer Networking and Gel Theory in Thermosetting Adhesive Formulations

    Article • August 2003, Taylor & Francis

    Antonio Pizzi

  213. Upgrading of MUF polycondensation resins by buffering additives. II. Hexamine sulfate mechanisms and alternate buffers

    Article • Journal of Applied Polymer Science, July 2003, Wiley

    Antonio Pizzi

  214. Upgrading melamine–urea–formaldehyde polycondensation resins with buffering additives. I. The effect of hexamine sulfate and its limits

    Article • Journal of Applied Polymer Science, July 2003, Wiley

    Antonio Pizzi

  215. Structure effects of additives in performance improvement of aminoplastic adhesive resins

    Article • Journal of Applied Polymer Science, April 2003, Wiley

    Antonio Pizzi

  216. Temperature-dependence modeling of highly crosslinked polymer networks

    Article • Journal of Applied Polymer Science, March 2003, Wiley

    Antonio Pizzi

  217. Tannins/melamine–urea–formaldehyde (MUF) resins substitution of chrome in leather and its characterization by thermomechanical analysis

    Article • Journal of Applied Polymer Science, March 2003, Wiley

    Antonio Pizzi

  218. Low addition of melamine salts for improved melamine‐urea‐formaldehyde adhesive water resistance

    Article • Journal of Applied Polymer Science, February 2003, Wiley

    Antonio Pizzi

  219. Wheat straw particleboard bonding improvements by enzyme pretreatment

    Article • European Journal of Wood and Wood Products, February 2003, Springer Science + Business Media

    Antonio Pizzi

  220. Upgrading of MUF particleboard adhesives and decrease of melamine content by buffer and additives

    Article • European Journal of Wood and Wood Products, February 2003, Springer Science + Business Media

    Antonio Pizzi

  221. Comparison of TMA and ABES as forecasting systems of wood bonding effectiveness

    Article • European Journal of Wood and Wood Products, February 2003, Springer Science + Business Media

    Antonio Pizzi

  222. Comparative wet wood glueing performance of different types of Glulam wood adhesives

    Article • European Journal of Wood and Wood Products, February 2003, Springer Science + Business Media

    Antonio Pizzi

  223. Comparative creep characteristics of structural glulam wood adhesives

    Article • European Journal of Wood and Wood Products, February 2003, Springer Science + Business Media

    Antonio Pizzi

  224. MECHANICALLY-INDUCED WOOD WELDING

    Article • Maderas Ciencia y tecnología, January 2003, SciELO Comision Nacional de Investigacion Cientifica Y Tecnologica (CONICYT)

    Antonio Pizzi, Maderas. Ciencia y Tecnologia

  225. Copolymerization in UF/pMDI adhesives networks

    Article • Journal of Applied Polymer Science, October 2002, Wiley

    Antonio Pizzi

  226. Comparison of gelling reaction effectiveness of procyanidin tannins for wood adhesives

    Article • European Journal of Wood and Wood Products, October 2002, Springer Science + Business Media

    Antonio Pizzi

  227. Time delay effect in TMA methods for MUF resins testing

    Article • European Journal of Wood and Wood Products, October 2002, Springer Science + Business Media

    Antonio Pizzi

  228. Dry I.B. forescasting of commercial tannin adhesives-bonded particleboard by TMA bending

    Article • European Journal of Wood and Wood Products, October 2002, Springer Science + Business Media

    Antonio Pizzi

  229. Rheology of polyflavonoid tannin–Formaldehyde reactions before and after gelling. I. Methods

    Article • Journal of Applied Polymer Science, August 2002, Wiley

    Antonio Pizzi

  230. UF/pMDI Wood Adhesives: Networks Blend versus Copolymerization

    Article • Holzforschung, April 2002, De Gruyter

    Antonio Pizzi

  231. Considerations on the macromolecular structure of chestnut ellagitannins by matrix‐assisted laser desorption/ionization‐time‐of‐flight mass spectrometry

    Article • Journal of Applied Polymer Science, April 2002, Wiley

    Antonio Pizzi

  232. Acetal‐induced strength increases and lower resin content of MUF and other polycondensation adhesives

    Article • Journal of Applied Polymer Science, April 2002, Wiley

    Antonio Pizzi

  233. Durability of heat-treated wood

    Article • European Journal of Wood and Wood Products, February 2002, Springer Science + Business Media

    Antonio Pizzi

  234. Honeymoon MUF adhesives for exterior grade glulam

    Article • European Journal of Wood and Wood Products, December 2001, Springer Science + Business Media

    Antonio Pizzi

  235. Comparative rheological characteristics of industrial polyflavonoid tannin extracts

    Article • Journal of Applied Polymer Science, August 2001, Wiley

    Antonio Pizzi

  236. MALDI–TOF mass spectrometry of polyflavonoid tannins

    Article • Polymer, August 2001, Elsevier

    Antonio Pizzi

  237. A no-aldehyde emission hardener for tannin-based wood adhesives for exterior panels

    Article • European Journal of Wood and Wood Products, August 2001, Springer Science + Business Media

    Antonio Pizzi

  238. CHT and TTT curing diagrams of polyflavonoid tannin resins

    Article • Journal of Applied Polymer Science, July 2001, Wiley

    Antonio Pizzi

  239. Influence of preparation parameters on the CHT curing diagrams of MUF polycondensation resins

    Article • Journal of Applied Polymer Science, June 2001, Wiley

    Antonio Pizzi

  240. Comparative rheological characteristics of industrial polyflavonoid tannin extracts

    Article • Journal of Applied Polymer Science, May 2001, Wiley

    Antonio Pizzi

  241. Dry I.b. forescasting of commercial tannin adhesives-bonded particleboard by TMA bending

    Article • European Journal of Wood and Wood Products, April 2001, Springer Science + Business Media

    Antonio Pizzi

  242. TTT and CHT curing diagrams of water‐borne polycondensation resins on lignocellulosic substrates

    Article • Journal of Applied Polymer Science, March 2001, Wiley

    Antonio Pizzi

  243. Hot postcuring improvement of MUF-bonded particleboards and its temperature forecasting model

    Article • European Journal of Wood and Wood Products, December 2000, Springer Science + Business Media

    Antonio Pizzi

  244. Tannery row - The story of some natural and synthetic wood adhesives

    Article • Wood Science and Technology, November 2000, Springer Science + Business Media

    Antonio Pizzi

  245. Heat-treated timber: potentially toxic byproducts presence and extent of wood cell wall degradation

    Article • European Journal of Wood and Wood Products, November 2000, Springer Science + Business Media

    Antonio Pizzi

  246. Particleboard I.B. forecast by TMA bending in MUF adhesives curing

    Article • European Journal of Wood and Wood Products, November 2000, Springer Science + Business Media

    Antonio Pizzi

  247. OSB adhesives rate of strength development on single strands couples

    Article • European Journal of Wood and Wood Products, October 2000, Springer Science + Business Media

    Antonio Pizzi

  248. Considerations on the interface between lignocellulosic materials and tannin-based and other thermosetting adhesives

    Article • Composite Interfaces, January 2000, Taylor & Francis

    Antonio Pizzi

  249. Hexamine hardener behaviour: effects on wood glueing, tannin and other wood adhesives

    Article • European Journal of Wood and Wood Products, October 1999, Springer Science + Business Media

    Antonio Pizzi

  250. Field weathering of plywood panels bonded with UF adhesives and low proportions of melamine salts

    Article • European Journal of Wood and Wood Products, October 1999, Springer Science + Business Media

    Antonio Pizzi

  251. Tannin Autocondensation and Polycondensation for Zero Emission Tannin Wood Adhesives

    Article • January 1999, Springer Science + Business Media

    Antonio Pizzi

  252. Particleboard dry and wet I.B. -forecasting by gel time and dry TMA bending in PF wood adhesives

    Article • European Journal of Wood and Wood Products, November 1998, Springer Science + Business Media

    Antonio Pizzi

  253. Industrial hardboard and other panels binder from waste lignocellulosic liquors/phenol-formaldehyde resins

    Article • European Journal of Wood and Wood Products, July 1998, Springer Science + Business Media

    Antonio Pizzi

  254. The effect of humidity on crosslinked and entanglement networking of formaidehyde-based wood adhesives

    Article • European Journal of Wood and Wood Products, July 1998, Springer Science + Business Media

    Antonio Pizzi

  255. Characterisation of thermally modified wood: molecular reasons for wood performance improvement

    Article • European Journal of Wood and Wood Products, May 1998, Springer Science + Business Media

    Antonio Pizzi

  256. Particleboard I.B. forcast by TMA bending in UF adhesives curing

    Article • European Journal of Wood and Wood Products, May 1998, Springer Science + Business Media

    Antonio Pizzi

  257. Normalised biological tests of protein borates wood preservatives

    Article • European Journal of Wood and Wood Products, May 1998, Springer Science + Business Media

    Antonio Pizzi

  258. Industrial hardboard and other panels binder from tannin/furfuryl alcohol in absence of formaldehyde

    Article • European Journal of Wood and Wood Products, May 1998, Springer Science + Business Media

    Antonio Pizzi

  259. Foreword

    Article • International Journal of Adhesion and Adhesives, March 1998, Elsevier

    Antonio Pizzi

  260. Interior MDI/pine tannin plywood adhesives without formaldehyde

    Article • European Journal of Wood and Wood Products, January 1998, Springer Science + Business Media

    Antonio Pizzi

  261. Glue-line wood cell walls increased viscoelastic flow by high moisture tolerance thermoset adhesives

    Article • European Journal of Wood and Wood Products, January 1998, Springer Science + Business Media

    Antonio Pizzi

  262. One-step tannin fixation of non-toxic protein borates wood preservatives

    Article • European Journal of Wood and Wood Products, January 1998, Springer Science + Business Media

    Antonio Pizzi

  263. Protein Borates as Non-Toxic, Long-Term, Wide-Spectrum, Ground-Contact Wood Preservatives

    Article • Holzforschung, January 1998, De Gruyter

    Antonio Pizzi

  264. Non-toxic albumin and soja protein borates as ground-contact wood preservatives

    Article • European Journal of Wood and Wood Products, September 1997, Springer Science + Business Media

    Antonio Pizzi

  265. Stability and performance of tannin-accelerated PF resins for plywood

    Article • European Journal of Wood and Wood Products, September 1997, Springer Science + Business Media

    Antonio Pizzi

  266. Improving UF plywood adhesives water resistance by coreaction with proteins

    Article • European Journal of Wood and Wood Products, March 1997, Springer Science + Business Media

    Antonio Pizzi

  267. Industrial tannin/hexamine low-emission exterior particleboards

    Article • European Journal of Wood and Wood Products, March 1997, Springer Science + Business Media

    Antonio Pizzi

  268. Dependence of tannin/hexamine particleboard performance from pressing conditions

    Article • European Journal of Wood and Wood Products, March 1997, Springer Science + Business Media

    Antonio Pizzi

  269. Waste nylon fibre hardeners for improved UF wood adhesives water resistance

    Article • European Journal of Wood and Wood Products, March 1997, Springer Science + Business Media

    Antonio Pizzi

  270. Succinaldehyde induced water resistance improvements of UF wood adhesives

    Article • European Journal of Wood and Wood Products, February 1997, Springer Science + Business Media

    Antonio Pizzi

  271. Molecular Mechanics/Experimental Methods Applied to Varnish/Primer/Wood Interactions

    Article • Holzforschung, January 1997, De Gruyter

    Antonio Pizzi

  272. Low addition of melamine salts for improved UF adhesives water resistance

    Article • European Journal of Wood and Wood Products, November 1996, Springer Science + Business Media

    Antonio Pizzi

  273. Influence of preparation procedure on pine tannin-based cold-set glulam adhesives

    Article • European Journal of Wood and Wood Products, November 1996, Springer Science + Business Media

    Antonio Pizzi

  274. Homogeneous catalysis of slow PF adhesives hardening by hydroxygroups-rich polymers

    Article • European Journal of Wood and Wood Products, July 1996, Springer Science + Business Media

    Antonio Pizzi

  275. MUF upgrading and phenol substitution by tannin in PMUFs

    Article • European Journal of Wood and Wood Products, July 1996, Springer Science + Business Media

    Antonio Pizzi

  276. Lower temperature tannin/hexamine-bonded particleboard of improved performance

    Article • European Journal of Wood and Wood Products, July 1996, Springer Science + Business Media

    Antonio Pizzi

  277. Poor performance of PMUF adhesives prepared by final coreaction of a MUF with a PF resin

    Article • European Journal of Wood and Wood Products, July 1996, Springer Science + Business Media

    Antonio Pizzi

  278. A new method for eliminating CCA sludges in rapid treating methods

    Article • European Journal of Wood and Wood Products, May 1996, Springer Science + Business Media

    Antonio Pizzi

  279. Influence of PMUF resins preparation method on their molecular structure and performance as adhesives for plywood

    Article • European Journal of Wood and Wood Products, March 1996, Springer Science + Business Media

    Antonio Pizzi

  280. A Different Approach to Low Formaldehyde Emission Aminoplastic Wood Adhesives

    Article • Holzforschung, January 1996, De Gruyter

    Antonio Pizzi

  281. A New Boron Fixation Mechanism for Environment Friendly Wood Preservatives

    Article • Holzforschung, January 1996, De Gruyter

    Antonio Pizzi

  282. Hardening Mechanisms by Hexamethylenetetramine of Fast-Reacting Phenolic Wood Adhesives - A CP-MAS 13C NMR Study

    Article • Holzforschung, January 1996, De Gruyter

    Antonio Pizzi

  283. Improvement of PMUF adhesives performance for fireproof plywood

    Article • European Journal of Wood and Wood Products, January 1996, Springer Science + Business Media

    Antonio Pizzi

  284. Interfacial mechanical bonding by SEM of wood and plastic composites

    Article • European Journal of Wood and Wood Products, January 1996, Springer Science + Business Media

    Antonio Pizzi

  285. Diffusion hindrance vs. wood‐induced catalytic activation of MUF adhesive polycondensation

    Article • Journal of Applied Polymer Science, October 1995, Wiley

    Antonio Pizzi

  286. Wood adhesives by intramicellar reaction of isocyanates with dextrines in water

    Article • European Journal of Wood and Wood Products, September 1995, Springer Science + Business Media

    Antonio Pizzi

  287. Wood hardening by methoxymethyl melamine

    Article • European Journal of Wood and Wood Products, August 1995, Springer Science + Business Media

    Antonio Pizzi

  288. Mechanism of polyphenolic tannin resin hardening by hexamethylenetetramine: CP–MAS 13C‐NMR

    Article • Journal of Applied Polymer Science, June 1995, Wiley

    Antonio Pizzi

  289. 13C‐NMR of Zn2+ acetate‐induced autocondensation of polyflavonoid tannins for phenolic polycondensates

    Article • Journal of Applied Polymer Science, May 1995, Wiley

    Antonio Pizzi

  290. Induced accelerated autocondensation of polyflavonoid tannins for phenolic polycondensates. III. CP‐MAS 13C‐NMR of different tannins and models

    Article • Journal of Applied Polymer Science, February 1995, Wiley

    Antonio Pizzi

  291. A 13C‐NMR analysis method for phenol–formaldehyde resin strength and formaldehyde emission

    Article • Journal of Applied Polymer Science, February 1995, Wiley

    Antonio Pizzi

  292. Induced accelerated autocondensation of polyflavonoid tannins for phenolic polycondensates. II. Cellulose effect and application

    Article • Journal of Applied Polymer Science, February 1995, Wiley

    Antonio Pizzi

  293. Simple 13C‐NMR methods for quantitative determinations of polyflavonoid tannin characteristics

    Article • Journal of Applied Polymer Science, January 1995, Wiley

    Antonio Pizzi

  294. Cross‐linked coatings by co‐reaction of isocyanate–methoxymethyl melamine systems

    Article • Journal of Applied Polymer Science, January 1995, Wiley

    Antonio Pizzi

  295. Covalent fixation of styrene in wood

    Article • European Journal of Wood and Wood Products, January 1995, Springer Science + Business Media

    Antonio Pizzi

  296. Isocyanate/Phenolics Wood Adhesives by Catalytic Acceleration of Copolymerization

    Article • Holzforschung, January 1995, De Gruyter

    Antonio Pizzi

  297. Autocondensation-based, zero-emission, tannin adhesives for particleboard

    Article • European Journal of Wood and Wood Products, January 1995, Springer Science + Business Media

    Antonio Pizzi

  298. Ambient temperature gelling of Tannin adhesives with hexamine

    Article • European Journal of Wood and Wood Products, October 1994, Springer Science + Business Media

    Antonio Pizzi

  299. Low formaldehyde emission, fast pressing, pine and pecan tannin adhesives for exterior particleboard

    Article • European Journal of Wood and Wood Products, October 1994, Springer Science + Business Media

    Antonio Pizzi

  300. Acid‐ and alkali‐catalyzed tannin‐based rigid foams

    Article • Journal of Applied Polymer Science, September 1994, Wiley

    Antonio Pizzi

  301. Hardening mechanism of tannin adhesives with hexamine

    Article • European Journal of Wood and Wood Products, August 1994, Springer Science + Business Media

    Antonio Pizzi

  302. Fast vs. slow-reacting non-modified tannin extracts for exterior particleboard adhesives

    Article • European Journal of Wood and Wood Products, August 1994, Springer Science + Business Media

    Antonio Pizzi

  303. Wood‐induced catalytic activation of PF adhesives autopolymerization vs. PF/wood covalent bonding

    Article • Journal of Applied Polymer Science, June 1994, Wiley

    Antonio Pizzi

  304. Characteristic industrial technology for exterior Eucalyptus particle board

    Article • European Journal of Wood and Wood Products, April 1994, Springer Science + Business Media

    Antonio Pizzi

  305. A 13C NMR study of polyflavonoid tannin adhesive intermediates. I. Noncolloidal performance determining rearrangements

    Article • Journal of Applied Polymer Science, March 1994, Wiley

    Antonio Pizzi

  306. A 13C NMR study of polyflavonoid tannin adhesive intermediates. II. Colloidal state reactions

    Article • Journal of Applied Polymer Science, March 1994, Wiley

    Antonio Pizzi

  307. Cold‐setting wood adhesives from kraft hardwood lignin

    Article • Journal of Applied Polymer Science, February 1994, Wiley

    Antonio Pizzi

  308. Completion of alkaline cure acceleration of phenol–formaldehyde resins: Acceleration by organic anhydrides

    Article • Journal of Applied Polymer Science, February 1994, Wiley

    Antonio Pizzi

  309. Phenol-Formaldehyde Wood Adhesives Under Very Alkaline Conditions. Part I: Behaviour and Proposed Mechanism

    Article • Holzforschung, January 1994, De Gruyter

    Antonio Pizzi

  310. Theory and Practice of the Preparation of Low Formaldehyde Emission UF Adhesives

    Article • Holzforschung, January 1994, De Gruyter

    Antonio Pizzi

  311. Phenol-Formaldehyde Wood Adhesives under very Alkaline Conditions. Part II: Esters Curing Acceleration, its Mechanism and Applied Results

    Article • Holzforschung, January 1994, De Gruyter

    Antonio Pizzi

  312. A New Concept on the Chemical Modification of Wood by Organic Anhydrides

    Article • Holzforschung, January 1994, De Gruyter

    Antonio Pizzi

  313. The Chemistry and Kinetic Behaviour of Fe(III) Reactions with Wood Model Compounds and Pine Wood

    Article • Holzforschung, January 1994, De Gruyter

    Antonio Pizzi

  314. Alkaline PF resins linear extension by urea condensation with hydroxybenzylalcohol groups

    Article • Journal of Applied Polymer Science, December 1993, Wiley

    Antonio Pizzi

  315. A comparative C13 NMR study of polyflavonoid tannin extracts for phenolic polycondensates

    Article • Journal of Applied Polymer Science, December 1993, Wiley

    Antonio Pizzi

  316. Some filler effects on cross‐linking of unsaturated polyesters

    Article • Journal of Applied Polymer Science, November 1993, Wiley

    Antonio Pizzi

  317. 13C NMR analysis method for urea–formaldehyde resin strength and formaldehyde emission

    Article • Journal of Applied Polymer Science, November 1993, Wiley

    Antonio Pizzi

  318. Thermoplastic melamine-formaldehyde resin

    Article • European Journal of Wood and Wood Products, November 1993, Springer Science + Business Media

    Antonio Pizzi

  319. On the chemistry, behavior, and cure acceleration of phenol–formaldehyde resins under very alkaline conditions

    Article • Journal of Applied Polymer Science, September 1993, Wiley

    Antonio Pizzi

  320. Urea–resorcinol–formaldehyde adhesives of low resorcinol content

    Article • Journal of Applied Polymer Science, June 1993, Wiley

    Antonio Pizzi

  321. Completion of unsaturated polyesters analysis by FTIR

    Article • Journal of Applied Polymer Science, May 1993, Wiley

    Antonio Pizzi

  322. The chemistry and development of branched PRF wood adhesives of low resorcinol content

    Article • Journal of Applied Polymer Science, January 1993, Wiley

    Antonio Pizzi

  323. Calculated values of the adhesion of phenol-formaldehyde oligomers to crystalline cellulose II

    Article • Journal of Adhesion Science and Technology, January 1993, Taylor & Francis

    Antonio Pizzi

  324. A New Approach to Non-Toxic, Wide-Spectrum, Ground-Contact Wood Preservatives. Part II. Accelerated and Long-Term Field Tests

    Article • Holzforschung, January 1993, De Gruyter

    Antonio Pizzi

  325. The Chemistry and Development of Pine Tannin Adhesives for Exterior Particleboard

    Article • Holzforschung, January 1993, De Gruyter

    Antonio Pizzi

  326. A New Approach to Non-Toxic, Wide-Spectrum, Ground-Contact Wood Preservatives. Part I. Approach and Reaction Mechanisms

    Article • Holzforschung, January 1993, De Gruyter

    Antonio Pizzi

  327. Rapid Curing Lignin-Based Exterior Wood Adhesives. Part I. Diisocyanates Reaction Mechanisms and Application to Panel Products

    Article • Holzforschung, January 1993, De Gruyter

    Antonio Pizzi

  328. Rapid-Curing Lignin-Based Exterior Wood Adhesives. Part II: Esters Acceleration Mechanism and Application to Panel Products

    Article • Holzforschung, January 1993, De Gruyter

    Antonio Pizzi

  329. Non-Emulsifiable, Water-Based, Mixed Diisocyanate Adhesive Systems for Exterior Plywood. Part II. Theory Application and Industrial Results

    Article • Holzforschung, January 1993, De Gruyter

    Antonio Pizzi

  330. Reaction of unsaturated linseed oil with a timber constituent

    Article • Journal of Applied Polymer Science, November 1992, Wiley

    Antonio Pizzi

  331. On the resolution of dihydroxydiphenylmethanes on achiral crystalline cellulose II. Correlation of experimental and calculated results

    Article • Chemical Physics, August 1992, Elsevier

    Antonio Pizzi

  332. Increased pine tannins extraction and wood adhesives development by phlobaphenes minimization

    Article • European Journal of Wood and Wood Products, May 1992, Springer Science + Business Media

    Antonio Pizzi

  333. Extend durability by chemical fixation of unsaturated waxes as wood surface finishes

    Article • European Journal of Wood and Wood Products, March 1992, Springer Science + Business Media

    Antonio Pizzi

  334. Tannin Structure and the Formulation of Tannin-Based Wood Adhesives

    Article • January 1992, Springer Science + Business Media

    Antonio Pizzi

  335. The Correlation of Strength and Formaldehyde Emission with the Crystalline/Amorphous Structure of UF Resins

    Article • Holzforschung, January 1992, De Gruyter

    Antonio Pizzi

  336. Non-Emulsifiable, Water-Based, Mixed Diisocyanate Adhesive Systems for Exterior Plywood - Part I. Novel Reaction Mechanisms and Their Chemical Evidence

    Article • Holzforschung, January 1992, De Gruyter

    Antonio Pizzi

  337. Radical crosslinking in saturated polyesters

    Article • Journal of Applied Polymer Science, October 1991, Wiley

    Antonio Pizzi

  338. A FT‐IR analysis method for simple unsaturated polyesters

    Article • Journal of Applied Polymer Science, March 1991, Wiley

    Antonio Pizzi

  339. Furfural-enhanced formaldehyde emission from UF particleboard

    Article • European Journal of Wood and Wood Products, October 1990, Springer Science + Business Media

    Antonio Pizzi

  340. Proof of varnishes chemical fixation to wood lignin

    Article • European Journal of Wood and Wood Products, September 1990, Springer Science + Business Media

    Antonio Pizzi

  341. Chromium Interactions in CCA/CCB Wood Preservatives. Part I. Interactions with Wood Carbohydrates

    Article • Holzforschung, January 1990, De Gruyter

    Antonio Pizzi

  342. Chromium Interactions in CCA/CCB Wood Preservatives. Part II. Interactions with Lignin.

    Article • Holzforschung, January 1990, De Gruyter

    Antonio Pizzi

  343. The formulation and commercialization of glulam pine tannin adhesives in Chile

    Article • European Journal of Wood and Wood Products, January 1990, Springer Science + Business Media

    Antonio Pizzi

  344. Soda Bagasse Lignin Adhesives for Particleboard

    Article • December 1989, American Chemical Society (ACS)

    Antonio Pizzi

  345. Research vs. Industrial Practice with Tannin-Based Adhesives

    Article • December 1989, American Chemical Society (ACS)

    Antonio Pizzi

  346. Elastic moduli of amorphous cellulose—a conformational analysis approach

    Article • Journal of Macromolecular Science Part B, April 1989, Taylor & Francis

    Antonio Pizzi

  347. Cold-set tannin-resorcinol-formaldehyde adhesives of lower resorcinol content

    Article • European Journal of Wood and Wood Products, February 1988, Springer Science + Business Media

    Antonio Pizzi

  348. Structural Weakening of CCA-Treated Timber

    Article • Holzforschung, January 1988, De Gruyter

    Antonio Pizzi

  349. Theoretical water sorption energies by conformational analysis

    Article • Wood Science and Technology, January 1987, Springer Science + Business Media

    Antonio Pizzi

  350. Tannin-Induced Formaldehyde Release Depression in Urea-Formaldehyde Particleboard

    Article • August 1986, American Chemical Society (ACS)

    Antonio Pizzi

  351. Tannin as a cause of failure of AAC preservatives

    Article • European Journal of Wood and Wood Products, August 1986, Springer Science + Business Media

    Antonio Pizzi

  352. Brief Originals

    Article • European Journal of Wood and Wood Products, June 1986, Springer Science + Business Media

    Antonio Pizzi

  353. Self-neutralizing acid-set PF wood adhesives

    Article • European Journal of Wood and Wood Products, June 1986, Springer Science + Business Media

    Antonio Pizzi

  354. plywood and Adhesive Technology

    Article • International Journal of Adhesion and Adhesives, April 1986, Elsevier

    Antonio Pizzi

  355. Natural Tannins for Cold-Setting Wood Adhesives

    Article • January 1986, Springer Science + Business Media

    Antonio Pizzi

  356. The Piezoelectric Effect in Structural Timber

    Article • Holzforschung, January 1986, De Gruyter

    Antonio Pizzi

  357. The Interaction of Polyflavonoid Tannins with Wood Cell-Walls

    Article • Holzforschung, January 1986, De Gruyter

    Antonio Pizzi

  358. Polyflavonoid tannins ? a main cause of soft-rot failure in CCA-treated timber

    Article • Wood Science and Technology, January 1986, Springer Science + Business Media

    Antonio Pizzi

  359. Lignin-based cold setting wood adhesives structural fingerjoints and glulam

    Article • European Journal of Wood and Wood Products, November 1985, Springer Science + Business Media

    Antonio Pizzi

  360. How does CCA stop lignin cleavage by ligninase enzymes from rot fungi?

    Article • European Journal of Wood and Wood Products, October 1985, Springer Science + Business Media

    Antonio Pizzi

  361. Impurities effect of CCA sludging

    Article • European Journal of Wood and Wood Products, September 1985, Springer Science + Business Media

    Antonio Pizzi

  362. The penetration characteristics of CCA preservatives in wood-radial/tangential, processes and species effects

    Article • European Journal of Wood and Wood Products, May 1985, Springer Science + Business Media

    Antonio Pizzi

  363. The Permanence and Biological Effectiveness of Creosotes and Creosote/Waxy Oil Mixtures

    Article • January 1985, Springer Science + Business Media

    Antonio Pizzi

  364. Wood adhesives: Chemistry and technology. Edited by A. Pizzi, Marcel Dekkar, New York and Basel, 1983. Pp ix + 364, price SFr 174.00. ISBN 0814715799

    Article • British Polymer Journal, December 1984, Wiley

    Antonio Pizzi

  365. The development of weather- and boil-proof phenol-resorcinol-furfural cold-setting adhesives

    Article • European Journal of Wood and Wood Products, December 1984, Springer Science + Business Media

    Antonio Pizzi

  366. The Structure of Cellulose by Conformational Analysis. 1. Cellobiose and Methyl-β-cellobioside

    Article • Journal of Macromolecular Science Part A - Chemistry, October 1984, Taylor & Francis

    Antonio Pizzi

  367. “Honeymoon” Phenolic Fast-Setting Adhesives for Exterior-Grade Finger Joints

    Article • January 1984, Springer Science + Business Media

    Antonio Pizzi

  368. Wood adhesives — Present and future

    Article • International Journal of Adhesion and Adhesives, October 1983, Elsevier

    Antonio Pizzi

  369. “Honeymoon” fast-setting adhesives for timber laminating

    Article • European Journal of Wood and Wood Products, February 1983, Springer Science + Business Media

    Antonio Pizzi

  370. Kinetics of the base fragmentation of a model of lignosulfonate

    Article • Journal of Polymer Science Polymer Chemistry Edition, February 1983, Wiley

    Antonio Pizzi

  371. Condensed tannins for adhesives

    Article • Industrial & Engineering Chemistry Product Research and Development, September 1982, American Chemical Society (ACS)

    Antonio Pizzi

  372. Pine tannin adhesives for particleboard

    Article • European Journal of Wood and Wood Products, August 1982, Springer Science + Business Media

    Antonio Pizzi

  373. The chemistry and kinetic behavior of Cu‐Cr‐As/B wood preservatives. IV. Fixation of CCA to wood

    Article • Journal of Polymer Science Polymer Chemistry Edition, March 1982, Wiley

    Antonio Pizzi

  374. Adhesives Used in South Africa to Finger-Joint Structural Timber

    Article • January 1982, Springer Science + Business Media

    Antonio Pizzi

  375. The chemistry and kinetic behavior of Cu‐Cr‐As/B wood preservatives. I. Fixation of chromium on wood

    Article • Journal of Polymer Science Polymer Chemistry Edition, December 1981, Wiley

    Antonio Pizzi

  376. Decrease of pressing temperature and adhesive content by metallic ion catalysis in tannin-bonded particleboard

    Article • European Journal of Wood and Wood Products, November 1981, Springer Science + Business Media

    Antonio Pizzi

  377. A new class of tannin adhesives for exterior particleboard

    Article • International Journal of Adhesion and Adhesives, July 1981, Elsevier

    Antonio Pizzi

  378. A new hardener for tannin adhesives for exterior particleboards

    Article • European Journal of Wood and Wood Products, July 1981, Springer Science + Business Media

    Antonio Pizzi

  379. Mechanism of viscosity variations during treatment of wattle tannins with hot NaOH

    Article • International Journal of Adhesion and Adhesives, April 1981, Elsevier

    Antonio Pizzi

  380. 34th annual general meeting of the forest products research society

    Article • International Journal of Adhesion and Adhesives, January 1981, Elsevier

    Antonio Pizzi

  381. Kinetics of the metal‐catalyzed condensations of phenols and polyflavonoid tannins with formaldehyde

    Article • Journal of Polymer Science Polymer Chemistry Edition, December 1980, Wiley

    Antonio Pizzi

  382. The kinetics of condensation of phenolic polyflavonoid tannins with aldehydes

    Article • Journal of Polymer Science Polymer Chemistry Edition, December 1980, Wiley

    Antonio Pizzi

  383. Wood waterproofing and lignin crosslinking by means of chromium trioxide/guajacyl units complexes

    Article • Journal of Applied Polymer Science, November 1980, Wiley

    Antonio Pizzi

  384. Effect and mechanism of hot caustic soda treatment on wattle tannins

    Article • International Journal of Adhesion and Adhesives, October 1980, Elsevier

    Antonio Pizzi

  385. Exterior wood adhesives by MDI crosslinking of polyflavonoid tannin B rings

    Article • Journal of Applied Polymer Science, September 1980, Wiley

    Antonio Pizzi

  386. Tannin-based adhesives: new theoretical aspects

    Article • International Journal of Adhesion and Adhesives, July 1980, Elsevier

    Antonio Pizzi

  387. 5th Congress of the International Union of Forestry Research Organizations (IUFRO) (All Divisions)

    Article • International Journal of Adhesion and Adhesives, July 1980, Elsevier

    Antonio Pizzi

  388. Laminating wood adhesives by generation of resorcinol from tannin extracts

    Article • Journal of Applied Polymer Science, June 1980, Wiley

    Antonio Pizzi

  389. Tannin-Based Adhesives

    Article • Journal of Macromolecular Science Part C- Polymer Reviews, January 1980, Taylor & Francis

    Antonio Pizzi

  390. Tannin/Polyurethane adhesives for bonding aluminum

    Article • Journal of Applied Polymer Science, September 1979, Wiley

    Antonio Pizzi

  391. Phenolic and tannin‐based adhesive resins by reactions of coordinated metal ligands. I. Phenolic chelates

    Article • Journal of Applied Polymer Science, September 1979, Wiley

    Antonio Pizzi

  392. Phenolic and tannin‐based adhesive resins by reactions of coordinated metal ligands. II. Tannin adhesive preparation, characteristics, and application

    Article • Journal of Applied Polymer Science, September 1979, Wiley

    Antonio Pizzi

  393. Phenolic resins by reactions of coordinated metal ligands

    Article • Journal of Polymer Science Polymer Letters Edition, August 1979, Wiley

    Antonio Pizzi

  394. The chemistry and development of tannin/urea–formaldehyde condensates for exterior wood adhesives

    Article • Journal of Applied Polymer Science, May 1979, Wiley

    Antonio Pizzi

  395. Tannin‐based polyurethane adhesives

    Article • Journal of Applied Polymer Science, March 1979, Wiley

    Antonio Pizzi

  396. Tannin‐based neutral and alkaline phenolic‐type foams

    Article • Journal of Applied Polymer Science, March 1979, Wiley

    Antonio Pizzi

  397. Sulphited tannins for exterior wood adhesives

    Article • Colloid & Polymer Science, January 1979, Springer Science + Business Media

    Antonio Pizzi

  398. Wattle tannin adhesives for radio-frequency curing

    Article • Journal of Applied Polymer Science, December 1978, Wiley

    Antonio Pizzi

  399. Resorcinol/wattle flavonoids condensates for cold-setting adhesives

    Article • Journal of Applied Polymer Science, September 1978, Wiley

    Antonio Pizzi

  400. Tannin‐formaldehyde exterior wood adhesives through flavonoid B‐ring cross linking

    Article • Journal of Applied Polymer Science, August 1978, Wiley

    Antonio Pizzi

  401. The chemistry and development of tannin‐based weather‐ and boil‐proof cold‐setting and fast‐setting adhesives for wood

    Article • Journal of Applied Polymer Science, July 1978, Wiley

    Antonio Pizzi

  402. The chemistry and development of tannin‐based adhesives for exterior plywood

    Article • Journal of Applied Polymer Science, June 1978, Wiley

    Antonio Pizzi

  403. Allowed Conformations of Alanyl preceding Prolyl Residues

    Article • Nature, May 1970, Springer Science + Business Media

    Antonio Pizzi

  404. Wood and Fiber Panel Technology

    Article • IGI Global

    Antonio Pizzi

  405. Natural Adhesives, Binders, and Matrices for Wood and Fiber Composites

    Article • IGI Global

    Antonio Pizzi

  406. One Component Polyurethane Adhesives for Green Wood Gluing: Creep and Temperature-Dependent Creep

    Article • ASME International

    Antonio Pizzi