All Stories

  1. Uphill Quenching of Aluminum Alloys

    Article • Materials Performance and Characterization, October 2017, ASTM International

    Dr. George E Totten

  2. ON VEG OIL METAL QUENCHANTS

    Article • Materials Performance and Characterization, June 2017, ASTM International

    Dr. George E Totten, PhD Rosa L Simencio Otero

  3. Influence of Pack Boriding on the Wear and Corrosion Resistance of AISI H13 Steel

    Article • Materials Performance and Characterization, December 2016, ASTM International

    Dr. George E Totten

  4. Comparative Impact Behavior of High-C Steel After Conventional Quenching, Tempering, and Austempering

    Article • Materials Performance and Characterization, August 2016, ASTM International

    Dr. George E Totten, Lauralice de Campos Franceschini Canale, PhD - Metallurgy and Materials Jan Vatavuk

  5. Characterization of Coatings Obtained by Boriding Niobizing Treatment of an AISI H13 Steel

    Article • Materials Performance and Characterization, July 2016, ASTM International

    Dr. George E Totten, Fábio Mariani

  6. Characterization of Layers Produced by Boriding and Boriding-PVD on AISI D2 Tool Steel

    Article • Materials Performance and Characterization, July 2016, ASTM International

    Dr. George E Totten, Fábio Mariani

  7. Production and Characterization of Boride Coatings on Flame-Sprayed Martensitic Stainless Steel

    Article • Materials Performance and Characterization, July 2016, ASTM International

    Dr. George E Totten, Fábio Mariani

  8. Production of Aluminide Layers on Copper and Copper Alloy

    Article • Materials Performance and Characterization, July 2016, ASTM International

    Dr. George E Totten

  9. Wear Behavior of a Borided Nickel-Based Self-Fluxing Thermal Spray Coating

    Article • Materials Performance and Characterization, July 2016, ASTM International

    Dr. George E Totten, Fábio Mariani

  10. Heat Treatment of Precipitation-Hardening Stainless Steels Alloyed With Niobium

    Article • Materials Performance and Characterization, February 2016, ASTM International

    Dr. George E Totten, Fábio Mariani

  11. Influence of Boronizing Treatment on Fe–Mn–Al–Si–C Steel

    Article • Materials Performance and Characterization, February 2016, ASTM International

    Dr. George E Totten

  12. Heat-Treated Components: Distortion

    Article • January 2016, Taylor & Francis

    Dr. George E Totten

  13. Chromizing

    Article • January 2016, Taylor & Francis

    Dr. George E Totten

  14. Delta Ferrite: Cracking of Steel Fasteners

    Article • January 2016, Taylor & Francis

    Dr. George E Totten

  15. Quench Factor Analysis

    Article • January 2016, Taylor & Francis

    Dr. George E Totten, PhD Rosa L Simencio Otero

  16. Tempering Parameter Development

    Article • January 2016, Taylor & Francis

    Dr. George E Totten

  17. High-Carbon Steel Wire: Patenting in Lead Bath

    Article • January 2016, Taylor & Francis

    Dr. George E Totten

  18. Hardening: Practical Aspects

    Article • January 2016, Taylor & Francis

    Dr. George E Totten

  19. Gas Quenching: High-Pressure Process and Equipment Design

    Article • January 2016, Taylor & Francis

    Dr. George E Totten

  20. Quench System Design: Induction Hardening

    Article • January 2016, Taylor & Francis

    Dr. George E Totten, PhD Rosa L Simencio Otero

  21. Encyclopedia of Iron, Steel, and Their Alloys

    Article • January 2016, Taylor & Francis

    Dr. George E Totten

  22. Mathematical Modeling and Simulation of Hardness of Quenched and Tempered Steel

    Article • Metallurgical and Materials Transactions B, September 2015, Springer Science + Business Media

    Dr. George E Totten

  23. Estimation of Transient Temperature Distribution during Quenching, via a Parabolic Model

    Article • Strojniški vestnik – Journal of Mechanical Engineering, February 2015, Faculty of Mechanical Engineering

    Dr Rafael D Mercado-Solis, Dr. George E Totten

  24. Nitriding of Stainless Steels

    Article • Metallography Microstructure and Analysis, November 2014, Springer Science + Business Media

    Dr. George E Totten

  25. High-Speed Quenching of High Carbon Steel

    Article • Materials Performance and Characterization, September 2014, ASTM International

    Dr. George E Totten, Dr. Martha P Guerrero Mata, Rafael Colas

  26. Vegetable Oils as Quenchants for Steels: Residual Stresses and Dimensional Changes

    Article • Materials Performance and Characterization, September 2014, ASTM International

    Dr. George E Totten, Barbara Rivolta, PhD Rosa L Simencio Otero, Lauralice de Campos Franceschini Canale

  27. Fatigue of Instensive Quenched Steels

    Article • Materials Performance and Characterization, September 2014, ASTM International

    Dr Rafael D Mercado-Solis, Dr. George E Totten

  28. “Reference QuenchProbe”—An Alternative Probe Design for In-Situ Estimation of Cooling Rates, Heat Flux, and Hardenability During Immersion Quenching of Hardenable Steels

    Article • Materials Performance and Characterization, September 2014, ASTM International

    Dr. George E Totten

  29. Distortion Control: Quenching Apparatus for Hardening Parts: An Overview

    Article • Materials Performance and Characterization, May 2014, ASTM International

    Dr. George E Totten, Xinmin Luo

  30. Comparison of Oxidation Stability and Quenchant Cooling Curve Performance of Soybean Oil and Palm Oil

    Article • Journal of Materials Engineering and Performance, May 2013, Springer Science + Business Media

    Dr. George E Totten, PhD Rosa L Simencio Otero

  31. Epoxidized Soybean Oil: Evaluation of Oxidative Stabilization and Metal Quenching/Heat Transfer Performance

    Article • Journal of Materials Engineering and Performance, April 2013, Springer Science + Business Media

    Dr. George E Totten, PhD Rosa L Simencio Otero

  32. Heat Transfer Properties of a Series of Oxidized and Unoxidized Vegetable Oils in Comparison with Petroleum Oil-Based Quenchants

    Article • Journal of Materials Engineering and Performance, March 2013, Springer Science + Business Media

    Dr. George E Totten

  33. Carburizing and Carbonitriding

    Article • January 2013, Springer Science + Business Media

    Dr. George E Totten

  34. Boriding

    Article • January 2013, Springer Science + Business Media

    Dr. George E Totten

  35. Thermal Spray Technologies: An Overview

    Article • January 2013, Springer Science + Business Media

    Dr. George E Totten

  36. Fast Primary Cooling: Alternative to Lead Baths for High-Carbon Steel Wire Patenting

    Article • Materials Performance and Characterization, November 2012, ASTM International

    Dr. George E Totten

  37. Automotive Lubricants and Testing

    Article • November 2012, ASTM International

    Dr. George E Totten

  38. Microstructural Characterization of Layers Produced by Plasma Nitriding on Austenitic and Superaustenitic Stainless Steel Grades

    Article • Journal of ASTM International, January 2012, ASTM International

    Dr. George E Totten, Prof Juno Gallego

  39. Thermal Oxidative Stability of Vegetable Oils as Metal Heat Treatment Quenchants

    Article • Journal of ASTM International, January 2012, ASTM International

    Dr. George E Totten, PhD Rosa L Simencio Otero

  40. Use of Vegetable Oils and Animal Oils as Steel Quenchants: A Historical Review—1850-2010

    Article • Journal of ASTM International, January 2012, ASTM International

    Dr. George E Totten, PhD Rosa L Simencio Otero

  41. Effect of the strain-hardening on the wear and corrosion behaviour of a Fe-Mn-Al-C alloy

    Article • International Journal of Microstructure and Materials Properties, January 2012, Inderscience Publishers

    Dr. George E Totten

  42. IFHTSE Medal 2011: George Totten

    Article • International Heat Treatment and Surface Engineering, December 2011, Taylor & Francis

    Dr. George E Totten

  43. Handbook of Hydraulic Fluid Technology, Second Edition

    Article • October 2011, Taylor & Francis

    Dr. George E Totten

  44. Physical Properties and Their Determination

    Article • October 2011, Taylor & Francis

    Dr. George E Totten

  45. Emulsions

    Article • October 2011, Taylor & Francis

    Dr. George E Totten

  46. Use of Vegetable Oils and Animal Oils as Steel Quenchants: A Historical Review—1850-2010

    Article • October 2011, ASTM International

    Dr. George E Totten, PhD Rosa L Simencio Otero

  47. Use of Vegetable Oils and Animal Oils as Steel Quenchants: A Historical Review—1850-2010

    Article • October 2011, ASTM International

    Dr. George E Totten, PhD Rosa L Simencio Otero

  48. Thermal Oxidative Stability of Vegetable Oils as Metal Heat Treatment Quenchants

    Article • September 2011, ASTM International

    Dr. George E Totten, PhD Rosa L Simencio Otero

  49. Thermal Oxidative Stability of Vegetable Oils as Metal Heat Treatment Quenchants

    Article • September 2011, ASTM International

    Dr. George E Totten, PhD Rosa L Simencio Otero

  50. Effect of Antioxidants on Oxidative Stability and Quenching Performance of Soybean Oil and Palm Oil Quenchants

    Article • August 2011, ASTM International

    Dr. George E Totten

  51. Effect of Antioxidants on Oxidative Stability and Quenching Performance of Soybean Oil and Palm Oil Quenchants

    Article • August 2011, ASTM International

    Dr. George E Totten

  52. Effect of Plasma Nitriding on the Wear and Corrosion Properties of Hastelloy CW2M Alloy

    Article • July 2011, ASTM International

    Dr. George E Totten

  53. Effect of Plasma Nitriding on the Wear and Corrosion Properties of Hastelloy CW2M Alloy

    Article • July 2011, ASTM International

    Dr. George E Totten

  54. Effect of Antioxidants on Oxidative Stability and Quenching Performance of Soybean Oil and Palm Oil Quenchants

    Article • Journal of ASTM International, January 2011, ASTM International

    Dr. George E Totten, Gabriela Belinato, Lauralice de Campos Franceschini Canale

  55. Effect of Plasma Nitriding on the Wear and Corrosion Properties of Hastelloy CW2M Alloy

    Article • Journal of ASTM International, January 2011, ASTM International

    Dr. George E Totten

  56. Experimental determination of the temperature evolution within the quenchant during immersion quenching in still water

    Article • International Journal of Microstructure and Materials Properties, January 2011, Inderscience Publishers

    Dr. George E Totten

  57. Conference report IFHTSE 18th Congress

    Article • International Heat Treatment and Surface Engineering, December 2010, Taylor & Francis

    Dr. George E Totten

  58. Determination of biodiesel oxidation stability of biodiesel B100 with optical spectroscopies of eletronic absorption UV-Visible correlation with Rancimat method DIN EN 14112

    Article • October 2010, SAE International

    Dr. George E Totten

  59. Quenching Theory and Technology, Second Edition

    Article • July 2010, Taylor & Francis

    Dr. George E Totten

  60. Hardening of Steels*

    Article • July 2010, Taylor & Francis

    Dr. George E Totten

  61. Gas Quenching

    Article • July 2010, Taylor & Francis

    Dr. George E Totten

  62. Quenching of Titanium Alloys

    Article • July 2010, Taylor & Francis

    Dr. George E Totten

  63. Effect of the HVOF Deposition Process in the Chemical Composition of Tungsten Carbide Layers with Cobalt or Nickel Binders

    Article • Journal of ASTM International, January 2010, ASTM International

    Dr. George E Totten

  64. Intensive Quenching Systems: Engineering and Design

    Article • January 2010, ASTM International

    Dr. George E Totten

  65. Overview of Pearlitic Rail Steel: Accelerated Cooling, Quenching, Microstructure, and Mechanical Properties

    Article • Journal of ASTM International, January 2009, ASTM International

    Dr. George E Totten

  66. Comparison of Structure and Quenching Performance of Vegetable Oils

    Article • Journal of ASTM International, January 2009, ASTM International

    Dr. George E Totten

  67. Water and Polymer Quenching of Aluminum Alloys: A Review of the Effect of Surface Condition, Water Temperature, and Polymer Quenchant Concentration on the Yield Strength of 7075-T6 Aluminum Plate

    Article • Journal of ASTM International, January 2009, ASTM International

    Dr. George E Totten

  68. Lubrication and Maintenance of Industrial Machinery

    Article • October 2008, Taylor & Francis

    Dr. George E Totten

  69. A historical overview of steel tempering parameters

    Article • International Journal of Microstructure and Materials Properties, January 2008, Inderscience Publishers

    Dr. George E Totten

  70. The effect of nitriding on the toughness and bending resistance of tool steels

    Article • International Journal of Microstructure and Materials Properties, January 2008, Inderscience Publishers

    Dr. George E Totten, PhD - Metallurgy and Materials Jan Vatavuk

  71. Modeling quenching performance by the kuyucak method

    Article • Materials Science and Engineering A, June 2007, Elsevier

    Dr. George E Totten

  72. Overview of factors contributing to steel spring performance and failure

    Article • International Journal of Microstructure and Materials Properties, January 2007, Inderscience Publishers

    Dr. George E Totten

  73. History And Advances In Tempering Parameter Development

    Article • November 2006, SAE International

    Dr. George E Totten

  74. Modeling Heat Transfer During Quenching Performance in Commercial Quench Tanks

    Article • November 2006, SAE International

    Dr. George E Totten

  75. Quench Factor Analysis To Quantify Steel Quench Severity And Its Successful Use In Steel Hardness Prediction

    Article • November 2006, SAE International

    Dr. George E Totten

  76. Self-Organization During Friction

    Article • September 2006

    Dr. George E Totten

  77. Handbook of Lubrication and Tribology

    Article • April 2006, Taylor & Francis

    Dr. George E Totten

  78. Quenching technology: a selected overview of the current state-of-the-art

    Article • Materials Research, December 2005, FapUNIFESP (SciELO)

    Dr. George E Totten

  79. An Accelerated Carburizing Process

    Article • November 2005, SAE International

    Dr. George E Totten

  80. HYDRAULIC CAVITATION FROM A SONOMATERIALS SCIENCE PERSPECTIVE: A REVIEW

    Article • November 2005, SAE International

    Dr. George E Totten

  81. Simulation Of Heat Transfer Properties And Residual Stress Analyses Of Cooling Curves Obtained From Quenching Studies

    Article • November 2005, SAE International

    Dr. George E Totten

  82. Analytical Characterization of Aluminum, Steel, and Superalloys

    Article • October 2005, Taylor & Francis

    Dr. George E Totten

  83. Lubrication Applications of Coat Forming Additives

    Article • May 2005, SAE International

    Dr. George E Totten

  84. Surface Engineered Coatings and Surface Additive Interactions for Boundary Film Formation to Reduce Frictional Losses in the Automotive Industry: A review

    Article • May 2005, SAE International

    Dr. George E Totten

  85. Overview of distortion and residual stress due to quench processing. Part I: factors affecting quench distortion

    Article • International Journal of Materials and Product Technology, January 2005, Inderscience Publishers

    Dr. George E Totten

  86. Use of aqueous polymer quenchants for hardening of carbonitrided parts

    Article • International Journal of Materials and Product Technology, January 2005, Inderscience Publishers

    Dr. George E Totten

  87. Oxidation of vegetable oils and its impact on quenching performance

    Article • International Journal of Materials and Product Technology, January 2005, Inderscience Publishers

    Dr. George E Totten

  88. Polymer Quenchants

    Article • January 2005, Elsevier

    Dr. George E Totten

  89. Handbook of Metallurgical Process Design

    Article • May 2004

    Dr. George E Totten

  90. Surface Modification and Mechanisms

    Article • April 2004, Taylor & Francis

    Dr. George E Totten

  91. Mechanical Tribology

    Article • April 2004, Taylor & Francis

    Dr. George E Totten

  92. Modeling and Simulation for Material Selection and Mechanical Design

    Article • December 2003

    Dr. George E Totten

  93. Handbook of Mechanical Alloy Design

    Article • November 2003, Taylor & Francis

    Dr. George E Totten

  94. Fuels and Lubricants Handbook: Technology, Properties, Performance, and Testing

    Article • June 2003, ASTM International

    Dr. George E Totten

  95. Handbook of Aluminum

    Article • April 2003, Taylor & Francis

    Dr. George E Totten

  96. Handbook of Aluminum

    Article • March 2003, Taylor & Francis

    Dr. George E Totten

  97. Quenching

    Article • March 2003, Taylor & Francis

    Dr. George E Totten

  98. Comparison of vickers V-104C and 20VQ5 vane pump wear rates for various water-glycol hydraulic fluids

    Article • Tribotest, June 2002, Wiley

    Dr. George E Totten

  99. IFHTSE and you

    Article • Surface Engineering, April 2002, Taylor & Francis

    Dr. George E Totten

  100. Structure of Carburized Layers With High Wear Resistance

    Article • March 2002, SAE International

    Dr. George E Totten

  101. Surface Modification Design: Carburizing With Atmospheres

    Article • March 2002, SAE International

    Dr. George E Totten

  102. The Influence of Different Cooling Media on Properties of Carburized Layers

    Article • March 2002, SAE International

    Dr. George E Totten

  103. Assessment of the Eaton (Vickers) V-104C Vane Pump as an Anttiwear Lubrication Tester

    Article • March 2002, SAE International

    Dr. George E Totten

  104. CURRENT NEEDS AND DEVELOPMENTS IN HYDRAULIC FLUID TECHNOLOGIES

    Article • Proceedings of the JFPS International Symposium on Fluid Power, January 2002, The Japan Fluid Power Systems Society

    Dr. George E Totten

  105. Development of a Standard High-Pressure Hydraulic Piston Pump Test: Status of ASTM D.02.N.07 Piston Pump Task Force Activities

    Article • Proceedings of the JFPS International Symposium on Fluid Power, January 2002, The Japan Fluid Power Systems Society

    Dr. George E Totten

  106. Hydraulic Failure Analysis: Fluids, Components, and System Effects

    Article • January 2001, ASTM International

    Dr. George E Totten

  107. Strategies for Developing Performance Standards for Alternative Hydraulic Fluids

    Article • September 2000, SAE International

    Dr. George E Totten

  108. Analysis of Common Failure Modes of Axial Piston Pumps

    Article • September 2000, SAE International

    Dr. George E Totten

  109. Aluminum Quenching Technology: A Review

    Article • Materials Science Forum, January 2000, Trans Tech Publications

    Dr. George E Totten

  110. Biodegradable Hydraulic Fluids: A Review

    Article • Proceedings of the JFPS International Symposium on Fluid Power, January 1999, The Japan Fluid Power Systems Society

    Dr. George E Totten

  111. DEVELOPMENT OF HYDRAULIC PUMP PERFORMANCE STANDARDS: AN OVERVIEW OF CURRENT ACTIVITIES

    Article • Proceedings of the JFPS International Symposium on Fluid Power, January 1999, The Japan Fluid Power Systems Society

    Dr. George E Totten

  112. Review of ASTM D-2882 Hardware Problems and Suggested Solutions

    Article • September 1998, SAE International

    Dr. George E Totten

  113. Hydraulic System Cavitation: A Review

    Article • September 1998, SAE International

    Dr. George E Totten

  114. Overview of the Proposed Rexroth High-Pressure Piston Pump Testing Procedure for Hydraulic Fluid Qualification

    Article • September 1998, SAE International

    Dr. George E Totten

  115. Tribology of Hydraulic Pump Testing

    Article • January 1997, ASTM International

    Dr. George E Totten

  116. Water-Glycol Hydraulic Fluid Evaluation by ASTM D 2882: Significant Contributors to Erroneous Results

    Article • August 1996, SAE International

    Dr. George E Totten

  117. Fire Resistance of Industrial Fluids

    Article • January 1996, ASTM International

    Dr. George E Totten

  118. Performance Map Characterization of Hydraulic Fluids

    Article • September 1994, SAE International

    Dr. George E Totten

  119. Review of Testing Methods for Hydraulic Fluid Flammability

    Article • September 1993, SAE International

    Dr. George E Totten

  120. Performance Map Characterization of Lubricating Oils — Characterization of Gear Lubricants Formulated from Different Base Oils

    Article • September 1993, SAE International

    Dr. George E Totten

  121. Thickened Water-Glycol Hydraulic Fluids for Use at High Pressures

    Article • September 1992, SAE International

    Dr. George E Totten

  122. Chapter 14—Compressor Lubricants

    Article • ASTM International

    Dr. George E Totten

  123. Overview of Pearlitic Rail Steel: Accelerated Cooling, Quenching, Microstructure, and Mechanical Properties

    Article • ASTM International

    Dr. George E Totten

  124. Comparison of Structure and Quenching Performance of Vegetable Oils

    Article • ASTM International

    Dr. George E Totten

  125. Water and Polymer Quenching of Aluminum Alloys: A Review of the Effect of Surface Condition, Water Temperature, and Polymer Quenchant Concentration on the Yield Strength of 7075-T6 Aluminum Plate

    Article • ASTM International

    Dr. George E Totten

  126. Chapter 8—Hydrocarbons for Chemical and Specialty Uses

    Article • ASTM International

    Dr. George E Totten

  127. Chapter 21—Mineral Oil Heat Transfer Fluids

    Article • ASTM International

    Dr. George E Totten

  128. Chapter 22—Non-Lubricating Process Fluids: Steel Quenching Technology

    Article • ASTM International

    Dr. George E Totten

  129. Chapter 35—Lubrication and Tribology Fundamentals

    Article • ASTM International

    Dr. George E Totten