30NiCrMoV12 coated with CrN and micro-blasted

What is it about?

30NiCrMoV12 quenched and tempered samples were coated with 4 μm of CrN produced by cathodic arc deposition technique. Micro-blasting treatment was performed on the coated samples, after the deposition, to remove defects like droplets from the surface. The fatigue limit was assessed and compared to that of the bare steel. A basic characterization of the coating/substrate was performed (hardness, roughness and adhesion). The residual stress distribution next to the surface of the samples was measured and its effect on the fatigue limit was evaluated. The micro-blasting treatment does not adversely affect the hardness and the adhesion of the coating nor the fatigue resistance of the coated samples.

Featured Image