All Stories

  1. Rheological Investigation of Semisolid AlSi7 Alloy by Means of Oscillation Experiments

    Article • Solid State Phenomena, January 2019, Trans Tech Publications

    Prof Annalisa Pola

  2. Damaging of Ultrasonic Horn for Semisolid Feedstock Production

    Article • Solid State Phenomena, January 2019, Trans Tech Publications

    Prof Annalisa Pola

  3. Correlation between Microstructure and Properties of Semi-Solid Products

    Article • Solid State Phenomena, January 2019, Trans Tech Publications

    Prof Annalisa Pola

  4. Influence of Cr and Mn Addition and Heat Treatment on the Corrosion Behaviour of an AlSi3Mg Alloy

    Article • Key Engineering Materials, September 2017, Trans Tech Publications

    Prof Annalisa Pola

  5. Effect of Shrinkage Porosity and Degenerated Graphite on Fatigue Crack Initiation in Ductile Cast Iron

    Article • Key Engineering Materials, September 2017, Trans Tech Publications

    Prof Annalisa Pola

  6. Rheological Properties of Liquid Metals and Semisolid Materials at Low Solid Fraction

    Article • Solid State Phenomena, September 2016, Trans Tech Publications

    Prof Annalisa Pola

  7. Effect of Globular Microstructure on Cavitation Erosion Resistance of Aluminium Alloys

    Article • Solid State Phenomena, September 2016, Trans Tech Publications

    Prof Annalisa Pola, dr ciro cs sinagra

  8. Crystallization and Ripening Phenomena in Semi-Solid Steels

    Article • Solid State Phenomena, September 2016, Trans Tech Publications

    Prof Annalisa Pola

  9. Experimental Investigations on the Formation of Rosettes during Shear

    Article • Solid State Phenomena, September 2016, Trans Tech Publications

    Prof Annalisa Pola

  10. corrosion and wear resistance of micro blasted CrN coated samples

    Article • Advances in Materials Science and Engineering, January 2016, Hindawi Publishing Corporation

    Prof Annalisa Pola

  11. determination of metallurgical factors affecting workability of Ti6Al4V

    Article • Materials and Manufacturing Processes, June 2015, Taylor & Francis

    Prof Annalisa Pola

  12. casting procedure of bronze Age sword hilt

    Article • JOM, June 2015, Springer Science + Business Media

    Prof Annalisa Pola

  13. effect of aging on the wear resistance of a new Zn alloy

    Article • Procedia Engineering, January 2015, Elsevier

    Prof Annalisa Pola

  14. Cr in aluminium alloy for HAF parts

    Article • Procedia Engineering, January 2015, Elsevier

    Prof Annalisa Pola

  15. 30NiCrMoV12 coated with CrN and micro-blasted

    Article • Procedia Engineering, January 2015, Elsevier

    Prof Annalisa Pola

  16. rheological measurements and modelling

    Article • Solid State Phenomena, September 2014, Trans Tech Publications

    Prof Annalisa Pola

  17. rheocasting of zinc alloy

    Article • Solid State Phenomena, September 2014, Trans Tech Publications

    Prof Annalisa Pola, prof. Roberto Roberti

  18. simulation of spray quenching of large parts

    Article • May 2014, European Council for Modeling and Simulation

    Prof Annalisa Pola

  19. analysis of creep damage constitutive equations

    Article • May 2014, European Council for Modeling and Simulation

    Prof Annalisa Pola

  20. Investment Casting, Centrifugal Casting, Squeeze Casting, Metal Spinning, and Batch Casting

    Article • January 2014, Elsevier

    Prof Annalisa Pola

  21. modeling of spray quenching of large and complex parts

    Article • Journal of Materials Processing Technology, December 2013, Elsevier

    Prof Annalisa Pola

  22. investigation on the effect of micro-blasting on adhesion and residual stress of CrN coating

    Article • Surface Engineering, October 2013, Taylor & Francis

    Prof Annalisa Pola

  23. Effect of 4 different microstructures of alpha+beta Ti alloy on micro-milling

    Article • Materials, September 2013, MDPI AG

    Prof Annalisa Pola

  24. effect of the number of layers and influence of defects on corrosion and wear resistance

    Article • Key Engineering Materials, September 2013, Trans Tech Publications

    Prof Annalisa Pola

  25. Forging of Al wrought alloy in semisolid state, obtained by ultrasound treatment

    Article • Key Engineering Materials, June 2013, Trans Tech Publications

    Prof Annalisa Pola

  26. wall slip effect dependency on suspension parameters, particle size and solid fraction

    Article • Solid State Phenomena, October 2012, Trans Tech Publications

    Prof Annalisa Pola

  27. effect of semisolid microstructure on wear resistance of Al-Sn-Cu alloys

    Article • Solid State Phenomena, October 2012, Trans Tech Publications

    Prof Annalisa Pola

  28. interrelation of shear rate and particle agglomeration in thixo-material

    Article • Solid State Phenomena, October 2012, Trans Tech Publications

    Prof Annalisa Pola

  29. investigation of a damaged pipe for electric arc furnace

    Article • Engineering Failure Analysis, October 2012, Elsevier

    Prof Annalisa Pola

  30. effect of globular microstructure on fracture toughness of AlSi5 alloy

    Article • January 2011, American Institute of Physics

    Prof Annalisa Pola

  31. modeling of long term rheological shear experiments with semi-solid alloys

    Article • Transactions of Nonferrous Metals Society of China, September 2010, Elsevier

    Prof Annalisa Pola

  32. effect of semisolid microstructure of Pb-Sb alloy on mechanical and corrosion resistance

    Article • Transactions of Nonferrous Metals Society of China, September 2010, Elsevier

    Prof Annalisa Pola

  33. mechanical and corrosion resistance of a new zinc alloy

    Article • International Journal of Material Forming, April 2010, Springer Science + Business Media

    Prof Annalisa Pola

  34. comparison of corrosion resistance of globular and dendritic microstructures of AlSi5 alloy

    Article • Werkstoffe und Korrosion, August 2009, Wiley

    Prof Annalisa Pola

  35. influence of aging times on total strain during primary creep was

    Article • Materials Characterization, December 2008, Elsevier

    Prof Annalisa Pola

  36. Evaluation of the effect of different routes for semisolid 5182 feedstock production

    Article • July 2008, CrossRef Test Account

    Prof Annalisa Pola

  37. shear rate and time-dependent flow behavior of AlSi5 alloy in the semisolid state

    Article • July 2008, CrossRef Test Account

    Prof Annalisa Pola

  38. Evaluation of ultrasound treatment on the obtainment of globular microstructure

    Article • July 2008, CrossRef Test Account

    Prof Annalisa Pola

  39. Evaluation of the effect of different routes for semisolid 5182 feedstock production

    Article • Solid State Phenomena, January 2008, Trans Tech Publications

    Prof Annalisa Pola

  40. shear rate and time-dependent flow behavior of AlSi5 alloy in the semisolid state

    Article • Solid State Phenomena, January 2008, Trans Tech Publications

    Prof Annalisa Pola

  41. Evaluation of ultrasound treatment on the obtainment of globular microstructure

    Article • Solid State Phenomena, January 2008, Trans Tech Publications

    Prof Annalisa Pola

  42. Effect of stress relieving annealing to prevent SCC phenomena of C68700 tubes

    Article • Engineering Failure Analysis, January 2008, Elsevier

    Prof Annalisa Pola

  43. theoretical and experimental analyses of different AlSi alloys for semisolid applications

    Article • October 2006, CrossRef Test Account

    Prof Annalisa Pola

  44. theoretical and experimental analyses of different AlSi alloys for semisolid applications

    Article • Solid State Phenomena, January 2006, Trans Tech Publications

    Prof Annalisa Pola

  45. mechanical properties of different zamak samples with low thickness produced by die casting

    Article • Advanced Engineering Materials, October 2004, Wiley

    Prof Annalisa Pola

  46. Evaluation of the effect of a new 'constrained layer' damping treatment for railway wheels

    Article • Proceedings of the Institution of Mechanical Engineers Part F Journal of Rail and Rapid Transit, May 2001, SAGE Publications

    Prof Annalisa Pola

  47. Evaluation of residual stress distribution in carburized steel components subjected to shot peening

    Article • International Journal of Materials and Product Technology, January 2000, Inderscience Publishers

    Prof Annalisa Pola