All Stories

  1. Thermal Management of a Transonic Turbine: Leakage Flow and Endwall Contouring Effects

    Article • Journal of Thermophysics and Heat Transfer, October 2018, American Institute of Aeronautics and Astronautics (AIAA)

    Dr. Srinath V Ekkad, Arnab Roy

  2. Heat Transfer Measurements inside Narrow Channels with Ribs and Trenches

    Article • Heat Transfer Engineering, June 2017, Taylor & Francis

    Dr. Srinath V Ekkad

  3. A Diagnostic Technique for Particle Characterization Using Laser Light Extinction

    Article • Journal of Engineering for Gas Turbines and Power, May 2016, ASME International

    Dr. Srinath V Ekkad

  4. Analysis of film cooling performance of advanced tripod hole geometries with and without manufacturing features

    Article • International Journal of Heat and Mass Transfer, March 2016, Elsevier

    Dr. Srinath V Ekkad

  5. Numerical study on thermoelectric–hydraulic performance of a thermoelectric power generator with a plate-fin heat exchanger with longitudinal vortex generators

    Article • Applied Energy, February 2016, Elsevier

    Dr. Srinath V Ekkad

  6. Effect of Downstream Contraction on Liner Heat Transfer in a Gas Turbine Combustor Swirl Flow

    Article • December 2015, ASME International

    Dr. Srinath V Ekkad

  7. Film Cooling Performance of Tripod Holes on the Endwall Upstream of a First Stage Nozzle Guide Vane

    Article • November 2015, ASME International

    Dr. Srinath V Ekkad

  8. Effect of Longitudinal Vortex Generator Location on Thermoelectric-Hydraulic Performance of a Single Stage Integrated Thermoelectric Power Generator

    Article • November 2015, ASME International

    Dr. Srinath V Ekkad

  9. Separation of Radiative and Convective Wall Heat Fluxes Using Thermal Infrared Measurements Applied to Flame Impingement

    Article • November 2015, ASME International

    Dr. Srinath V Ekkad

  10. Evaluation of Multilouvered-Fin-Based Heat Exchangers for Automobile Exhaust Energy Harvesting Systems

    Article • Journal of Thermophysics and Heat Transfer, October 2015, American Institute of Aeronautics and Astronautics (AIAA)

    Dr. Srinath V Ekkad, Jaideep Pandit

  11. Study on Thermoelectric-hydraulic Performance of Longitudinal Vortex Generators in a Large-scale Thermoelectric Power Generator

    Article • Energy Procedia, August 2015, Elsevier

    Dr. Srinath V Ekkad

  12. A REVIEW OF HOLE GEOMETRY AND COOLANT DENSITY EFFECT ON FILM COOLING

    Article • Frontiers in Heat and Mass Transfer, July 2015, Global Digital Central

    Dr. Srinath V Ekkad

  13. Influence of Rotation on Heat Transfer in a Two-Pass Channel With Impingement Under High Reynolds Number

    Article • June 2015, ASME International

    Dr. Srinath V Ekkad

  14. Numerical Investigation of Effect of Geometry Changes in a Model Combustor on Swirl Dominated Flow and Heat Transfer

    Article • June 2015, ASME International

    Dr. Srinath V Ekkad

  15. Experimental Study of Heat Transfer Augmentation in High Aspect-Ratio Channels Featuring Different Dimple Configurations

    Article • June 2015, ASME International

    Dr. Srinath V Ekkad

  16. A Diagnostic Technique for Particle Characterization Using Laser Light Extinction

    Article • June 2015, ASME International

    Dr. Srinath V Ekkad, Dr Todd Lowe

  17. Combustor Heat Shield Impingement Cooling and its Effect on Liner Convective Heat Transfer for a Model Annular Combustor With Radial Swirlers

    Article • June 2015, ASME International

    Dr. Srinath V Ekkad

  18. Simulation of thermoelectric-hydraulic performance of a thermoelectric power generator with longitudinal vortex generators

    Article • Proceedings of the Institution of Civil Engineers - Energy, May 2015, Elsevier

    Dr. Srinath V Ekkad

  19. A Novel Transient Technique to Determine Recovery Temperature, Heat Transfer Coefficient, and Film Cooling Effectiveness Simultaneously in a Transonic Turbine Cascade

    Article • Journal of Thermal Science and Engineering Applications, December 2014, ASME International

    Dr. Srinath V Ekkad

  20. Effect of pin fin to channel height ratio and pin fin geometry on heat transfer performance for flow in rectangular channels

    Article • International Journal of Heat and Mass Transfer, October 2014, Elsevier

    Dr. Srinath V Ekkad

  21. Flow Field and Liner Heat Transfer for a Model Annular Combustor Equipped with Radial Swirlers

    Article • July 2014, American Institute of Aeronautics and Astronautics (AIAA)

    Dr. Srinath V Ekkad

  22. Impingement Cooling for Combustor Liner Backside Cooling

    Article • June 2014, WITPRESS LTD.

    Dr. Srinath V Ekkad

  23. Aerodynamic Performance of a Transonic Turbine Blade Passage in Presence of Upstream Slot and Mateface Gap With Endwall Contouring

    Article • June 2014, ASME International

    Dr. Srinath V Ekkad

  24. Heat Transfer Performance of a Transonic Turbine Blade Passage in Presence of Leakage Flow Through Upstream Slot and Mateface Gap With Endwall Contouring

    Article • June 2014, ASME International

    Dr. Srinath V Ekkad

  25. Sand transport in a two pass internal cooling duct with rib turbulators

    Article • International Journal of Heat and Fluid Flow, April 2014, Elsevier

    Dr. Srinath V Ekkad

  26. Evaluation of Multi-Louvered Fin Based Heat Exchangers for use in Automobile Exhaust Energy Harvesting Systems

    Article • January 2014, American Institute of Aeronautics and Astronautics (AIAA)

    Dr. Srinath V Ekkad, Jaideep Pandit

  27. Internal Cooling

    Article • January 2014, American Institute of Aeronautics and Astronautics (AIAA)

    Dr. Srinath V Ekkad

  28. Evaluation of Herringbone Wavy Fin Based Heat Exchanger for Heat Transfer Enhancement in Automobile Exhaust Energy Harvesting Systems

    Article • January 2014, Begell House

    Dr. Srinath V Ekkad

  29. Numerical Modeling of Fluid Flow and Thermal Behavior in Geothermal Heat Exchangers

    Article • November 2013, ASME International

    Dr. Srinath V Ekkad

  30. Effect of Rotation on Detailed Heat Transfer Distribution for Various Rib Geometries in Developing Channel Flow

    Article • Journal of Heat Transfer, October 2013, ASME International

    Dr. Srinath V Ekkad

  31. Film-Cooling Performance of Antivortex Hole on a Flat Plate

    Article • Journal of Turbomachinery, September 2013, ASME International

    Dr. Srinath V Ekkad

  32. Comparison of Flow and Heat Transfer Distributions in a Can Combustor for Radial and Axial Swirlers Under Cold Flow Conditions

    Article • Journal of Thermal Science and Engineering Applications, July 2013, ASME International

    Dr. Srinath V Ekkad

  33. Experimental Investigation of Heat Transfer Across a Thermoelectric Generator for Waste Heat Recovery From Automobile Exhaust

    Article • July 2013, ASME International

    Dr. Srinath V Ekkad

  34. Effect of Endwall Contouring in presence of Upstream Leakage Flow in a Transonic Turbine Blade Passage: Heat Transfer Measurements

    Article • July 2013, American Institute of Aeronautics and Astronautics (AIAA)

    Dr. Srinath V Ekkad

  35. Multi-Layer Mini-Channel and Ribbed Mini-Channel Based High Performance Cooling Configurations for Automotive Inverters—Part A: Design and Evaluation

    Article • Journal of Thermal Science and Engineering Applications, June 2013, ASME International

    Dr. Srinath V Ekkad

  36. Heat Transfer Enhancement in Narrow Diverging Channels

    Article • Journal of Turbomachinery, June 2013, ASME International

    Dr. Srinath V Ekkad

  37. Tripod Hole Geometry Performance for a Vane Suction Surface Near Throat Location

    Article • June 2013, ASME International

    Dr. Srinath V Ekkad

  38. Effect of Hole Exit Shaping on Film Cooling Performance for Tripod Hole Injection Over a Flat Surface

    Article • June 2013, ASME International

    Dr. Srinath V Ekkad

  39. Effect of Upstream Purge Slot on a Transonic Turbine Blade Passage: Part 2 — Heat Transfer Performance

    Article • June 2013, ASME International

    Dr. Srinath V Ekkad

  40. Effect of Upstream Purge Slot on a Transonic Turbine Blade Passage: Part 1 — Aerodynamic Performance

    Article • June 2013, ASME International

    Dr. Srinath V Ekkad

  41. Test Capabilities in the CCAPS/CSDL Augmentor Development Facility

    Article • January 2013, American Institute of Aeronautics and Astronautics (AIAA)

    Dr. Srinath V Ekkad

  42. Effect of Partial 3-Dimensional Pin Fin Geometry for Heat Transfer Enhancement in High Aspect Ratio Channels

    Article • November 2012, ASME International

    Dr. Srinath V Ekkad

  43. Experimental Validation of Temperature Distributions Across a Heat Exchanger for a Thermoelectric Generator

    Article • November 2012, ASME International

    Dr. Srinath V Ekkad

  44. Effect of Breakout Angle on Tripod Injection Hole Geometries on Flat Plate Film Cooling

    Article • November 2012, ASME International

    Dr. Srinath V Ekkad

  45. Detailed Heat Transfer Distributions in Engine Similar Cooling Channels for a Turbine Rotor Blade With Different Rib Orientations

    Article • Journal of Turbomachinery, October 2012, ASME International

    Dr. Srinath V Ekkad

  46. Grid-Zone Particle Hydrodynamics and Solid Circulation in a Multiple Jet Fluidized Bed

    Article • July 2012, ASME International

    Dr. Srinath V Ekkad

  47. High Efficiency Minichannel and Mini-Impingement Cooling Systems for Hybrid Electric Vehicle Electronics

    Article • July 2012, ASME International

    Dr. Srinath V Ekkad

  48. Effect of Rotation on Jet Impingement Heat Transfer for Various Jet Configurations

    Article • July 2012, ASME International

    Dr. Srinath V Ekkad

  49. Sand Transport in a Two Pass Internal Cooling Duct With Rib Turbulators

    Article • July 2012, ASME International

    Dr. Srinath V Ekkad

  50. Performance of Tripod Antivortex Injection Holes on Vane Film Cooling

    Article • July 2012, ASME International

    Dr. Srinath V Ekkad

  51. Comparison of Flow and Heat Transfer Distributions in a Can Combustor for Radial and Axial Swirlers Under Cold Flow Conditions

    Article • July 2012, ASME International

    Dr. Srinath V Ekkad

  52. Measurement of Aerodynamic Losses for Turbine Airfoil Cascades With Varying Pitch, Operating Under Transonic Conditions

    Article • June 2012, ASME International

    Dr. Srinath V Ekkad

  53. Effect of Endwall Contouring on a Transonic Turbine Blade Passage: Part 1—Aerodynamic Performance

    Article • June 2012, ASME International

    Dr. Srinath V Ekkad

  54. Heat Transfer Enhancement in Narrow Diverging Channels

    Article • June 2012, ASME International

    Dr. Srinath V Ekkad

  55. Effect of Endwall Contouring on a Transonic Turbine Blade Passage: Part 2—Heat Transfer Performance

    Article • June 2012, ASME International

    Dr. Srinath V Ekkad

  56. Optimization of Low Jet-to-Target Spacing Ratio for Double Wall Impingement Cooling Applications

    Article • January 2012, American Institute of Aeronautics and Astronautics (AIAA)

    Dr. Srinath V Ekkad

  57. Heat Exchanger Design for Waste Heat Recovery from Automobile Exhaust Using Thermoelectric Generators

    Article • January 2012, American Institute of Aeronautics and Astronautics (AIAA)

    Dr. Srinath V Ekkad

  58. Detailed Heat Transfer Measurements Inside Rotating Ribbed Channels Using the Transient Liquid Crystal Technique

    Article • Journal of Thermal Science and Engineering Applications, January 2012, ASME International

    Dr. Srinath V Ekkad

  59. Effects of Rotation on Heat Transfer for a Single Row Jet Impingement Array With Crossflow

    Article • Journal of Heat Transfer, January 2012, ASME International

    Dr. Srinath V Ekkad

  60. Impingement-based high performance cooling configurations for automotive power converters

    Article • International Journal of Heat and Mass Transfer, January 2012, Elsevier

    Dr. Srinath V Ekkad

  61. Experimental study on solid circulation in a multiple jet fluidized bed

    Article • AIChE Journal, December 2011, Wiley

    Dr. Srinath V Ekkad

  62. Influence of multiple gas inlet jets on fluidized bed hydrodynamics using Particle Image Velocimetry and Digital Image Analysis

    Article • Powder Technology, November 2011, Elsevier

    Dr. Srinath V Ekkad

  63. Performance of Tripod Antivortex Injection Holes on Vane Suction Side Film Cooling

    Article • July 2011, American Institute of Aeronautics and Astronautics (AIAA)

    Dr. Srinath V Ekkad

  64. Experimental and numerical investigation of confined oblique impingement configurations for high heat flux applications

    Article • International Journal of Thermal Sciences, June 2011, Elsevier

    Dr. Srinath V Ekkad

  65. Effects of Rotation on Jet Impingement Channel Heat Transfer

    Article • January 2011, ASME International

    Dr. Srinath V Ekkad

  66. Optimized Impingement Configurations for Double Wall Cooling Applications

    Article • January 2011, ASME International

    Dr. Srinath V Ekkad

  67. Film-Cooling Performance of Anti-Vortex Hole on a Flat Plate

    Article • January 2011, ASME International

    Dr. Srinath V Ekkad

  68. Detailed Heat Transfer Distributions in Engine Similar Cooling Channels for a Turbine Rotor Blade With Different Rib Orientations

    Article • January 2011, ASME International

    Dr. Srinath V Ekkad

  69. Effect of Turbine Airfoil Shape on Aerodynamic Losses for Turbine Airfoils Operating Under Transonic Conditions

    Article • January 2011, ASME International

    Dr. Srinath V Ekkad

  70. Investigation of Effect of End Wall Contouring Methods on a Transonic Turbine Blade Passage

    Article • January 2011, ASME International

    Dr. Srinath V Ekkad

  71. Detailed Heat Transfer Measurements Inside Rotating Ribbed Channels Using the Transient Liquid Crystal Technique

    Article • January 2011, ASME International

    Dr. Srinath V Ekkad

  72. Prediction and Validation of Performance of an Entrained Flow Gasifier Model

    Article • January 2011, ASME International

    Dr. Srinath V Ekkad

  73. Heat Transfer Distribution of Various Rib Geometries for Developing Flow at High Rotation Numbers

    Article • January 2011, ASME International

    Dr. Srinath V Ekkad

  74. Effect of Airfoil Shape and Turning Angle on Turbine Airfoil Aerodynamic Performance at Transonic Conditions

    Article • January 2011, ASME International

    Dr. Srinath V Ekkad

  75. Study of Flow and Convective Heat Transfer in a Simulated Scaled Up Low Emission Annular Combustor

    Article • Journal of Thermal Science and Engineering Applications, January 2011, ASME International

    Dr. Srinath V Ekkad

  76. Experimental and Numerical Investigation of Convective Heat Transfer in a Gas Turbine Can Combustor

    Article • Journal of Turbomachinery, January 2011, ASME International

    Dr. Srinath V Ekkad

  77. Innovative liquid cooling configurations for high heat flux applications

    Article • June 2010, Institute of Electrical & Electronics Engineers (IEEE)

    Dr. Srinath V Ekkad

  78. Experimental Investigation of Cooling Performance of Metal-Based Microchannels

    Article • Heat Transfer Engineering, May 2010, Taylor & Francis

    Dr. Srinath V Ekkad

  79. Selected Papers From the 19th National & 8th ISHMT-ASME Heat and Mass Transfer Conference

    Article • Heat Transfer Engineering, May 2010, Taylor & Francis

    Dr. Srinath V Ekkad

  80. Study of Flow and Convective Heat Transfer in a Simulated Scaled Up Low Emission Annular Combustor

    Article • January 2010, ASME International

    Dr. Srinath V Ekkad

  81. Novel PCM and Jet Impingement Based Cooling Scheme for High Density Transient Heat Loads

    Article • January 2010, ASME International

    Dr. Srinath V Ekkad

  82. Experimental and Numerical Investigations of a Transonic, High Turning Turbine Cascade With a Divergent Endwall

    Article • January 2010, ASME International

    Dr. Srinath V Ekkad

  83. Film Cooling Study of Novel Orthogonal Entrance and Shaped Exit Holes

    Article • January 2009, ASME International

    Dr. Srinath V Ekkad

  84. Film Cooling Measurements for Cratered Cylindrical Inclined Holes

    Article • Journal of Turbomachinery, January 2009, ASME International

    Dr. Srinath V Ekkad

  85. Experimental and Numerical Investigation of Convective Heat Transfer in a Gas Turbine Can Combustor

    Article • January 2009, ASME International

    Dr. Srinath V Ekkad

  86. Film Cooling From a Row of Holes Supplemented With Antivortex Holes

    Article • Journal of Turbomachinery, January 2009, ASME International

    Dr. Srinath V Ekkad

  87. Effect of Trench Width and Depth on Film Cooling From Cylindrical Holes Embedded in Trenches

    Article • Journal of Turbomachinery, January 2009, ASME International

    Dr. Srinath V Ekkad

  88. Predictions of Flow and Heat Transfer in Low Emission Combustors

    Article • Heat Transfer Engineering, April 2008, Taylor & Francis

    Dr. Srinath V Ekkad

  89. Trench Film Cooling: Effect of Trench Downstream Edge and Hole Spacing

    Article • January 2008, ASME International

    Dr. Srinath V Ekkad

  90. Numerical Prediction of Flow and Heat Transfer Rates in Metal Based Microchannels Using Lattice Boltzmann Method

    Article • January 2008, ASME International

    Dr. Srinath V Ekkad

  91. A Novel Antivortex Turbine Film-Cooling Hole Concept

    Article • Journal of Turbomachinery, January 2008, ASME International

    Dr. Srinath V Ekkad

  92. Turbine blade showerhead film cooling: Influence of hole angle and shaping

    Article • International Journal of Heat and Fluid Flow, October 2007, Elsevier

    Dr. Srinath V Ekkad

  93. Film Cooling Measurements for Cratered Cylindrical Inclined Holes

    Article • January 2007, ASME International

    Dr. Srinath V Ekkad

  94. A Novel Anti-Vortex Turbine Film Cooling Hole Concept

    Article • January 2007, ASME International

    Dr. Srinath V Ekkad

  95. Understanding the Effect of Trenching on Film Cooling

    Article • January 2007, ASME International

    Dr. Srinath V Ekkad

  96. Effect of Trench Width and Depth on Film Cooling From Cylindrical Holes Embedded in Trenches

    Article • January 2007, ASME International

    Dr. Srinath V Ekkad

  97. Film Cooling From a Row of Holes Supplemented With Anti Vortex Holes

    Article • January 2007, ASME International

    Dr. Srinath V Ekkad

  98. Effect of Tip and Pressure Side Coolant Injection on Heat Transfer Distributions for a Plane and Recessed Tip

    Article • Journal of Turbomachinery, January 2007, ASME International

    Dr. Srinath V Ekkad

  99. Predictions of Film Cooling from Cylindrical Holes Embedded in Trenches

    Article • June 2006, American Institute of Aeronautics and Astronautics (AIAA)

    Dr. Srinath V Ekkad

  100. Film Cooling Predictions for Cratered Cylindrical Inclined Holes

    Article • January 2006, ASME International

    Dr. Srinath V Ekkad

  101. Influence of Hole Angle and Shaping on Leading Edge Showerhead Film Cooling

    Article • January 2006, ASME International

    Dr. Srinath V Ekkad

  102. Film Cooling Measurements for Novel Hole Configurations

    Article • Journal of Heat Transfer, January 2006, ASME International

    Dr. Srinath V Ekkad

  103. Jet Impingement Heat Transfer Visualization Using a Steady State Liquid Crystal Method

    Article • Journal of Heat Transfer, January 2006, ASME International

    Dr. Srinath V Ekkad

  104. Effect of Jet Pulsation and Duty Cycle on Film Cooling From a Single Jet on a Leading Edge Model

    Article • Journal of Turbomachinery, January 2006, ASME International

    Dr. Srinath V Ekkad

  105. Corrugated Wall Jet Impingement Geometry for Combustor Liner Backside Cooling

    Article • January 2006, ASME International

    Dr. Srinath V Ekkad

  106. Film Cooling Measurements for Novel Hole Configurations

    Article • January 2005, ASME International

    Dr. Srinath V Ekkad

  107. Film Cooling From a Row of Holes Embedded in Transverse Slots

    Article • January 2005, ASME International

    Dr. Srinath V Ekkad

  108. Simulations of Dimensional Effects in Solid Oxide Fuel Cells

    Article • January 2005, ASME International

    Dr. Srinath V Ekkad

  109. CFD for Jet Impingement Heat Transfer With Single Jets and Arrays

    Article • January 2005, ASME International

    Dr. Srinath V Ekkad

  110. Effect of Tip and Pressure Side Coolant Injection on Heat Transfer Distributions for a Plane and Recessed Tip

    Article • January 2005, ASME International

    Dr. Srinath V Ekkad

  111. Impingement Heat Transfer Part I: Linearly Stretched Arrays of Holes

    Article • Journal of Thermophysics and Heat Transfer, January 2005, American Institute of Aeronautics and Astronautics (AIAA)

    Dr. Srinath V Ekkad

  112. Impingement Heat Transfer, Part II: Effect of Streamwise Pressure Gradient

    Article • Journal of Thermophysics and Heat Transfer, January 2005, American Institute of Aeronautics and Astronautics (AIAA)

    Dr. Srinath V Ekkad

  113. Effects of Tip Gap Film Injection From Plain and Squealer Blade Tips

    Article • January 2004, ASME International

    Dr. Srinath V Ekkad

  114. Combination of Impingement and Trip Strips for Combustor Liner Backside Cooling

    Article • January 2004, ASME International

    Dr. Srinath V Ekkad

  115. A Transient Infrared Thermography Method for Simultaneous Film Cooling Effectiveness and Heat Transfer Coefficient Measurements From a Single Test

    Article • January 2004, ASME International

    Dr. Srinath V Ekkad

  116. Effect of Jet Pulsation and Duty Cycle on Film Cooling From a Single Jet on a Leading Edge Model

    Article • January 2004, ASME International

    Dr. Srinath V Ekkad

  117. Heat Transfer Study of a Novel Low-Crossflow Design for Jet Impingement

    Article • January 2004, ASME International

    Dr. Srinath V Ekkad

  118. Effect of Blade Tip Geometry on Tip Flow and Heat Transfer for a Blade in a Low-Speed Cascade

    Article • Journal of Turbomachinery, January 2004, ASME International

    Dr. Srinath V Ekkad

  119. Effect of Squealer Geometry on Tip Flow and Heat Transfer for a Turbine Blade in a Low Speed Cascade

    Article • Journal of Heat Transfer, January 2004, ASME International

    Dr. Srinath V Ekkad

  120. A Transient Infrared Thermography Method for Simultaneous Film Cooling Effectiveness and Heat Transfer Coefficient Measurements From a Single Test

    Article • Journal of Turbomachinery, January 2004, ASME International

    Dr. Srinath V Ekkad

  121. Effect of Tip Gap and Squealer Geometry on Detailed Heat Transfer Measurements Over a High Pressure Turbine Rotor Blade Tip

    Article • Journal of Turbomachinery, January 2004, ASME International

    Dr. Srinath V Ekkad, Dr CHANDER PRAKASH

  122. Improved film cooling from cylindrical angled holes with triangular tabs: effect of tab orientations

    Article • International Journal of Heat and Fluid Flow, October 2003, Elsevier

    Dr. Srinath V Ekkad

  123. Flat Surface Film Cooling from Cylindrical Holes with Discrete Tabs

    Article • Journal of Thermophysics and Heat Transfer, July 2003, American Institute of Aeronautics and Astronautics (AIAA)

    Dr. Srinath V Ekkad

  124. Impingement Heat Transfer Under Linearly Stretched Arrays of Holes

    Article • January 2003, ASME International

    Dr. Srinath V Ekkad

  125. Effect of Blade Tip Geometry on Tip Flow and Heat Transfer for a Blade in a Low Speed Cascade

    Article • January 2003, ASME International

    Dr. Srinath V Ekkad

  126. Effect of Tip Gap and Squealer Geometry on Measured Heat Transfer Over a HPT Rotor Blade Tip

    Article • January 2003, ASME International

    Dr. Srinath V Ekkad

  127. Dimple Enhanced Heat Transfer in High Aspect Ratio Channels

    Article • Journal of Enhanced Heat Transfer, January 2003, Begell House

    Dr. Srinath V Ekkad

  128. Heat Transfer in Two-Pass Turbulated Channels Connected by Holes

    Article • Journal of Thermophysics and Heat Transfer, July 2002, American Institute of Aeronautics and Astronautics (AIAA)

    Dr. Srinath V Ekkad

  129. Jet impingement heat transfer on dimpled target surfaces

    Article • International Journal of Heat and Fluid Flow, February 2002, Elsevier

    Dr. Srinath V Ekkad

  130. Effect of Jet-to-Jet Spacing in Impingement Arrays on Heat Transfer

    Article • January 2002, ASME International

    Dr. Srinath V Ekkad

  131. Numerical Simulation of Film Cooling on the Tip of a Gas Turbine Blade

    Article • January 2002, ASME International

    Dr. Srinath V Ekkad

  132. Flow and Heat Transfer Predictions for a Flat-Tip Turbine Blade

    Article • January 2002, ASME International

    Dr. Srinath V Ekkad

  133. Numerical Simulation of Flow and Heat Transfer Past a Turbine Blade With a Squealer-Tip

    Article • January 2002, ASME International

    Dr. Srinath V Ekkad

  134. Effect of Rotation on Flow and Temperature Distributions in a Two-Pass Channel Connected by Two Rows of Holes

    Article • January 2002, ASME International

    Dr. Srinath V Ekkad

  135. Effect of compound angle injection on flat surface film cooling with large streamwise injection angle

    Article • Experimental Thermal and Fluid Science, August 2001, Elsevier

    Dr. Srinath V Ekkad

  136. Film Cooling From a Single Row of Cylindrical Angled Holes With Triangular Tabs Having Different Orientations

    Article • June 2001, ASME International

    Dr. Srinath V Ekkad

  137. Effect of Rib Turbulators in the First Pass on Heat Transfer Distributions in a Two-Pass Channel Connected by Two Rows of Holes

    Article • June 2001, ASME International

    Dr. Srinath V Ekkad

  138. Influence of Crossflow-Induced Swirl and Impingement on Heat Transfer in a Two-Pass Channel Connected by Two Rows of Holes

    Article • Journal of Turbomachinery, January 2001, ASME International

    Dr. Srinath V Ekkad

  139. Recent Development in Turbine Blade Film Cooling

    Article • International Journal of Rotating Machinery, January 2001, Hindawi Publishing Corporation

    Dr. Srinath V Ekkad

  140. Detailed Film Cooling Measurements over a Gas Turbine Blade Using a Transient Liquid Crystal Image Technique

    Article • International Journal of Rotating Machinery, January 2001, Hindawi Publishing Corporation

    Dr. Srinath V Ekkad

  141. Detailed heat transfer measurements inside straight and tapered two-pass channels with rib turbulators

    Article • Experimental Thermal and Fluid Science, September 2000, Elsevier

    Dr. Srinath V Ekkad

  142. A transient liquid crystal thermography technique for gas turbine heat transfer measurements

    Article • Measurement Science and Technology, June 2000, Institute of Physics Publishing

    Dr. Srinath V Ekkad

  143. Influence of Cross-Flow Induced Swirl and Impingement on Heat Transfer in a Two-Pass Channel Connected by Two Rows of Holes

    Article • May 2000, ASME International

    Dr. Srinath V Ekkad

  144. Impingement Heat Transfer Measurements Under an Array of Inclined Jets

    Article • Journal of Thermophysics and Heat Transfer, April 2000, American Institute of Aeronautics and Astronautics (AIAA)

    Dr. Srinath V Ekkad

  145. Impingement Heat Transfer on a Target Plate with Film Cooling Holes

    Article • Journal of Thermophysics and Heat Transfer, October 1999, American Institute of Aeronautics and Astronautics (AIAA)

    Dr. Srinath V Ekkad

  146. Heat Transfer Distributions on a Cylinder with Simulated Thermal Barrier Coating Spallation

    Article • Journal of Thermophysics and Heat Transfer, January 1999, American Institute of Aeronautics and Astronautics (AIAA)

    Dr. Srinath V Ekkad

  147. Detailed heat transfer distributions in two-pass square channels with rib turbulators and bleed holes

    Article • International Journal of Heat and Mass Transfer, December 1998, Elsevier

    Dr. Srinath V Ekkad

  148. Effect of Unsteady Wake With Trailing Edge Coolant Ejection on Film Cooling Performance for a Gas Turbine Blade

    Article • June 1998, ASME International

    Dr. Srinath V Ekkad

  149. Detailed Heat Transfer Distributions Under an Array of Orthogonal Impinging Jets

    Article • Journal of Thermophysics and Heat Transfer, January 1998, American Institute of Aeronautics and Astronautics (AIAA)

    Dr. Srinath V Ekkad

  150. Effect of Film Injection Location on Local Heat Transfer Coefficient on a Gas Turbine Blade

    Article • International Journal of Rotating Machinery, January 1998, Hindawi Publishing Corporation

    Dr. Srinath V Ekkad

  151. Detailed heat transfer distributions in two-pass square channels with rib turbulators

    Article • International Journal of Heat and Mass Transfer, July 1997, Elsevier

    Dr. Srinath V Ekkad

  152. Detailed Film Cooling Measurements on a Cylindrical Leading Edge Model: Effect of Free-Stream Turbulence and Coolant Density

    Article • June 1997, ASME International

    Dr. Srinath V Ekkad

  153. Effect of Unsteady Wake on Detailed Heat Transfer Coefficient and Film Effectiveness Distributions for a Gas Turbine Blade

    Article • June 1997, ASME International

    Dr. Srinath V Ekkad

  154. Detailed heat transfer distributions on a cylindrical model with simulated TBC spallation

    Article • January 1997, American Institute of Aeronautics and Astronautics (AIAA)

    Dr. Srinath V Ekkad

  155. Heat transfer inside and downstream of cavities using transient liquid crystal method

    Article • Journal of Thermophysics and Heat Transfer, July 1996, American Institute of Aeronautics and Astronautics (AIAA)

    Dr. Srinath V Ekkad

  156. LOCAL HEAT TRANSFER COEFFICIENT AND FILM EFFECTIVENESS DISTRIBUTIONS ON A CYLINDRICAL LEADING EDGE MODEL USING A TRANSIENT LIQUID CRYSTAL IMAGE METHOD

    Article • Journal of Flow Visualization and Image Processing, January 1996, Begell House

    Dr. Srinath V Ekkad

  157. SURFACE HEAT TRANSFER VISUALIZATION ON A MODEL GAS TURBINE BLADE USING A TRANSIENT LIQUID CRYSTAL IMAGE TECHNIQUE

    Article • Journal of Flow Visualization and Image Processing, January 1996, Begell House

    Dr. Srinath V Ekkad

  158. Heat Transfer Coefficients Over a Flat Surface With Air and CO 2 Injection Through Compound Angle Holes Using a Transient Liquid Crystal Image Method

    Article • June 1995, ASME International

    Dr. Srinath V Ekkad

  159. Film Effectiveness Over a Flat Surface With Air and CO 2 Injection Through Compound Angle Holes Using a Transient Liquid Crystal Image Method

    Article • June 1995, ASME International

    Dr. Srinath V Ekkad

  160. LOCAL HEAT TRANSFER DISTRIBUTIONS NEAR A SHARP 180° TURN OF A TWO-PASS SMOOTH SQUARE CHANNEL USING A TRANSIENT LIQUID CRYSTAL IMAGE TECHNIQUE

    Article • Journal of Flow Visualization and Image Processing, January 1995, Begell House

    Dr. Srinath V Ekkad

  161. Mainstream turbulence effect on film effectiveness and heat transfer coefficient of a gas turbine blade with air and CO2 film injection

    Article • International Journal of Heat and Mass Transfer, November 1994, Elsevier

    Dr. Srinath V Ekkad