Contact

All Stories

  1. Comparative study of metallic foil friction stir welded and conventional friction stir welded AZ61 Mg alloy butt joints: Biomedical and engineering applications

    Article • AIP Advances, April 2024, American Institute of Physics

    Dr CHANDER PRAKASH, Mr Raman Kumar

  2. On design and fabrication of meta structure-based dual alloys by direct metal laser sintering

    Article • January 2024, American Institute of Physics

    Dr CHANDER PRAKASH, Rupinder Singh

  3. Electric discharge machining: A comprehensive review for difficult to cut materials

    Article • January 2024, American Institute of Physics

    Vidyapati Kumar, Bhargav Prajwal, Dr CHANDER PRAKASH

  4. Laser powder bed fusion: a state-of-the-art review of the technology, materials, properties & defects, and numerical modelling

    Article • Journal of Materials Research and Technology, September 2022, Elsevier

    Dr CHANDER PRAKASH

  5. Material recovery and recycling of waste tyres-A review

    Article • Cleaner Materials, September 2022, Elsevier

    Dr CHANDER PRAKASH

  6. Synthesis of functionalized HAp-surface on β-Ti alloy using ball-burnishing assisted EDC process for biomedical application

    Article • Archives of Civil and Mechanical Engineering, August 2022, Springer Science + Business Media

    Dr CHANDER PRAKASH

  7. Development of GGBS-Based Geopolymer Concrete Incorporated with Polypropylene Fibers as Sustainable Materials

    Article • Sustainability, August 2022, MDPI AG

    Dr CHANDER PRAKASH

  8. Development of Carbon Nanotube (CNT)-Reinforced Mg Alloys: Fabrication Routes and Mechanical Properties

    Article • Metals, August 2022, MDPI AG

    Dr CHANDER PRAKASH

  9. 3D-Printed Satellite Brackets: Materials, Manufacturing and Applications

    Article • Crystals, August 2022, MDPI AG

    Dr CHANDER PRAKASH

  10. Effect of Mass on the Dynamic Characteristics of Single- and Double-Layered Graphene-Based Nano Resonators

    Article • Materials, August 2022, MDPI AG

    Dr CHANDER PRAKASH

  11. Influence of Fiber Angle on Steady-State Response of Laminated Composite Rectangular Plates

    Article • Materials, August 2022, MDPI AG

    Dr CHANDER PRAKASH

  12. Significance of Alloying Elements on the Mechanical Characteristics of Mg-Based Materials for Biomedical Applications

    Article • Crystals, August 2022, MDPI AG

    Dr CHANDER PRAKASH

  13. Artificial Intelligence Technologies for Forecasting Air Pollution and Human Health: A Narrative Review

    Article • Sustainability, August 2022, MDPI AG

    Dr CHANDER PRAKASH

  14. Understanding the Mechanism of Abrasive-Based Finishing Processes Using Mathematical Modeling and Numerical Simulation

    Article • Metals, August 2022, MDPI AG

    Dr CHANDER PRAKASH

  15. A Comprehensive Review of Friction Stir Techniques in Structural Materials and Alloys: Challenges and Trends

    Article • Journal of Materials Research and Technology, August 2022, Elsevier

    Dr CHANDER PRAKASH

  16. Corrosion Behavior of Friction Stir Welded AA8090-T87 Aluminum Alloy

    Article • Materials, July 2022, MDPI AG

    Dr CHANDER PRAKASH

  17. Microstructure and Mechanical Properties Analysis of Al/Cu Dissimilar Alloys Joining by Using Conventional and Bobbin Tool Friction Stir Welding

    Article • Materials, July 2022, MDPI AG

    Dr CHANDER PRAKASH

  18. ULTRA-PRECISION DIAMOND PROCESSING OF BIODEGRADABLE AZ31 ALLOY FOR ORTHOPEDIC APPLICATION

    Article • Surface Review and Letters, July 2022, World Scientific Pub Co Pte Lt

    Dr CHANDER PRAKASH

  19. Effects of Various Pseudomonas Bacteria Concentrations on the Strength and Durability Characteristics of Concrete

    Article • Buildings, July 2022, MDPI AG

    Dr CHANDER PRAKASH

  20. Determination of Optimum Machining Parameters for Face Milling Process of Ti6A14V Metal Matrix Composite

    Article • Materials, July 2022, MDPI AG

    Dr CHANDER PRAKASH

  21. Manufacturing Techniques for Mg-Based Metal Matrix Composite with Different Reinforcements

    Article • Crystals, July 2022, MDPI AG

    Dr CHANDER PRAKASH

  22. Machining parameter optimization and experimental investigations of nano-graphene mixed electrical discharge machining of nitinol shape memory alloy

    Article • Journal of Materials Research and Technology, July 2022, Elsevier

    Dr CHANDER PRAKASH

  23. Effect of Al2O3 Nanoparticles on Performance and Emission Characteristics of Diesel Engine Fuelled with Diesel–Neem Biodiesel Blends

    Article • Sustainability, June 2022, MDPI AG

    Dr CHANDER PRAKASH

  24. Al-Mg-MoS2 Reinforced Metal Matrix Composites: Machinability Characteristics

    Article • Materials, June 2022, MDPI AG

    Dr CHANDER PRAKASH

  25. Effects of nano filler powder during microwave-based joining of SS304 butt joints

    Article • Proceedings of the Institution of Mechanical Engineers Part E Journal of Process Mechanical Engineering, June 2022, SAGE Publications

    Dr CHANDER PRAKASH

  26. Real-Time Structural Health Monitoring and Damage Identification Using Frequency Response Functions along with Finite Element Model Updating Technique

    Article • Sensors, June 2022, MDPI AG

    Dr CHANDER PRAKASH

  27. Life Cycle Saving Analysis of an Earth-Coupled Building without and with Roof Evaporative Cooling for Energy Efficient Potato Storage Application

    Article • Energies, June 2022, MDPI AG

    Dr CHANDER PRAKASH

  28. A critical review on additive manufacturing of Ti-6Al-4V alloy: microstructure and mechanical properties

    Article • Journal of Materials Research and Technology, May 2022, Elsevier

    Dr CHANDER PRAKASH

  29. Corrigendum to “processing of Ti50Nb50−xHAx composites by rapid microwave sintering technique for biomedical applications” [J Mater Res Technol 9 (1) (2020) 242–252]

    Article • Journal of Materials Research and Technology, May 2022, Elsevier

    Dr CHANDER PRAKASH

  30. Machine Learning for Prediction of Heat Pipe Effectiveness

    Article • Energies, April 2022, MDPI AG

    Dr CHANDER PRAKASH

  31. Experimental investigation on material removal rate, kerf width, surface roughness and the dimensional accuracy the accuracy of hole in Inconel 718 using wire electric discharge

    Article • Proceedings of the Institution of Mechanical Engineers Part E Journal of Process Mechanical Engineering, April 2022, SAGE Publications

    Dr CHANDER PRAKASH

  32. Whole Body Vibration Exposure among the Tractor Operator during Soil Tillage Operation: An Evaluation using ISO 2631-5 Standard

    Article • Shock and Vibration, January 2022, Hindawi Publishing Corporation

    Dr CHANDER PRAKASH

  33. Understanding the Micro-Mechanical Behaviour of Recast Layer Formed during WEDM of Titanium Alloy

    Article • Metals, January 2022, MDPI AG

    Dr CHANDER PRAKASH

  34. A Low-Cost Multi-Sensor Data Acquisition System for Fault Detection in Fused Deposition Modelling

    Article • Sensors, January 2022, MDPI AG

    Dr CHANDER PRAKASH

  35. A critical review on damage modeling and failure analysis of pin joints in fiber reinforced composite laminates

    Article • Polymers and Polymer Composites, January 2022, SAGE Publications

    Dr CHANDER PRAKASH

  36. Artificial intelligence and advanced materials in automotive industry: Potential applications and perspectives

    Article • Materials Today Proceedings, January 2022, Elsevier

    Dr CHANDER PRAKASH

  37. Development of hybrid Gr/SiC reinforced AMCs through friction stir processing

    Article • Materials Today Proceedings, January 2022, Elsevier

    Dr CHANDER PRAKASH

  38. Grey based multi-objective optimization of machining performance in boring of aluminium alloy 6061 through piezoelectric shunt damping

    Article • Materials Today Proceedings, January 2022, Elsevier

    Dr CHANDER PRAKASH

  39. HA-based coating by plasma spray techniques on titanium alloy for orthopedic applications

    Article • Materials Today Proceedings, January 2022, Elsevier

    Dr CHANDER PRAKASH

  40. Investigation on surface roughness and hardness of β-Ti alloy by ball burnishing assisted electrical discharge cladding for bio-medical applications

    Article • Materials Today Proceedings, January 2022, Elsevier

    Dr CHANDER PRAKASH

  41. Optimization and significance of fabrication parameters on the mechanical properties of 3D printed Chitosan/PLA scaffold

    Article • Materials Today Proceedings, January 2022, Elsevier

    Dr CHANDER PRAKASH

  42. Tribo-mechanical behaviour of aluminium alloy (AlSi10Mg) reinforced with palmyra shell ash and silicon carbide particles

    Article • Metallurgical Research & Technology, January 2022, EDP Sciences

    Dr CHANDER PRAKASH

  43. Tribological behavior of zirconia-toughened alumina (ZTA) against Ti6Al4V under different bio-lubricants in hip prosthesis using experimental and finite element concepts

    Article • Materials Letters, January 2022, Elsevier

    Dr CHANDER PRAKASH

  44. Understanding the role of advanced materials for energy infrastructure and transmission

    Article • Materials Today Proceedings, January 2022, Elsevier

    Dr CHANDER PRAKASH

  45. High-Temperature Corrosion Performance of FeAl-Based Alloys Containing Carbon in Molten Salt

    Article • Metals, December 2021, MDPI AG

    Dr CHANDER PRAKASH

  46. In-vitro tribological study and submodeling finite element technique in analyzing wear of zirconia toughened alumina against alumina with bio-lubricants for hip implants

    Article • Medical Engineering & Physics, December 2021, Elsevier

    Dr CHANDER PRAKASH

  47. Micro-mechanical characterization of superficial layer synthesized by electric discharge machining process

    Article • Materials Letters, December 2021, Elsevier

    Dr CHANDER PRAKASH

  48. Assessment of the Benefits of Information and Communication Technologies (ICT) Adoption on Downstream Supply Chain Performance of the Retail Industry

    Article • Logistics, November 2021, MDPI AG

    Dr CHANDER PRAKASH

  49. Infrastructure, mobility and safety 4.0: Modernization in road transportation.

    Article • Technology in Society, November 2021, Elsevier

    Dr CHANDER PRAKASH, Vaseem Akram Shaik

  50. Investigation of Functionally Graded Adherents on Failure of Socket Joint of FRP Composite Tubes

    Article • Materials, October 2021, MDPI AG

    Dr CHANDER PRAKASH

  51. Characterization of Friction Stir-Welded Polylactic Acid/Aluminum Composite Primed through Fused Filament Fabrication

    Article • Journal of Materials Engineering and Performance, October 2021, Springer Science + Business Media

    Dr CHANDER PRAKASH

  52. Surface Roughness Analysis of H13 Steel during Electrical Discharge Machining Process Using Cu–TiC Sintered Electrode

    Article • Materials, October 2021, MDPI AG

    Dr CHANDER PRAKASH

  53. Modelling and optimization of tractor ride conditions under water tanker operation

    Article • Theoretical Issues in Ergonomics Science, October 2021, Taylor & Francis

    Dr CHANDER PRAKASH

  54. Experimental Investigation and Optimization of Electric Discharge Machining Process Parameters Using Grey-Fuzzy-Based Hybrid Techniques

    Article • Materials, October 2021, MDPI AG

    Dr CHANDER PRAKASH

  55. Synthesis of functionalized TiO2-loaded HAp-coating by ball-burnishing assisted electric discharge cladding process

    Article • Materials Letters, October 2021, Elsevier

    Dr CHANDER PRAKASH

  56. Evaluation and Analysis of Whole-Body Vibration Exposure during Soil Tillage Operation

    Article • Safety, August 2021, MDPI AG

    Dr CHANDER PRAKASH

  57. Recast Layer Formation during Wire Electrical Discharge Machining of Titanium (Ti-Al6-V4) Alloy

    Article • Journal of Materials Engineering and Performance, August 2021, Springer Science + Business Media

    Dr CHANDER PRAKASH

  58. EXPERIMENTAL INVESTIGATION AND PARAMETRIC OPTIMIZATION OF NEUROSURGICAL BONE GRINDING UNDER BIO-MIMIC ENVIRONMENT

    Article • Surface Review and Letters, July 2021, World Scientific Pub Co Pte Lt

    Dr CHANDER PRAKASH

  59. CHARACTERIZATION AND ELECTROCHEMICAL CORROSION ANALYSIS OF HEAT-TREATED REINFORCED HA COATINGS DEPOSITED BY VACUUM PLASMA SPRAY TECHNIQUE

    Article • Surface Review and Letters, July 2021, World Scientific Pub Co Pte Lt

    Dr CHANDER PRAKASH

  60. Cloud Manufacturing, IOT-Assisted Manufacturing & 3D Printing Technology.

    Article • Sustainability, June 2021, MDPI AG

    Dr CHANDER PRAKASH, Vaseem Akram Shaik

  61. Environmental, Economical and Technological Analysis of MQL-Assisted Machining of Al-Mg-Zr Alloy Using PCD Tool

    Article • Sustainability, June 2021, MDPI AG

    Dr CHANDER PRAKASH

  62. Drilling of titanium alloy (Ti6Al4V) – a review

    Article • Machining Science and Technology, June 2021, Taylor & Francis

    Dr CHANDER PRAKASH

  63. Experimental analysis of wear and multi-shape burr loading during neurosurgical bone grinding

    Article • Journal of Materials Research and Technology, May 2021, Elsevier

    Dr CHANDER PRAKASH

  64. Revealing the WEDM Process Parameters for the Machining of Pure and Heat-Treated Titanium (Ti-6Al-4V) Alloy

    Article • Materials, April 2021, MDPI AG

    Dr CHANDER PRAKASH

  65. Characterization of in-House-Developed Mn-ZnO-Reinforced Polyethylene: A Sustainable Approach for Developing Fused Filament Fabrication-Based Filament

    Article • Journal of Materials Engineering and Performance, April 2021, Springer Science + Business Media

    Dr CHANDER PRAKASH

  66. Multiple-Criteria Decision-Making and Sensitivity Analysis for Selection of Materials for Knee Implant Femoral Component

    Article • Materials, April 2021, MDPI AG

    Dr CHANDER PRAKASH

  67. Vibration Exposure and Transmissibility on Dentist’s Anatomy: A Study of Micro Motors and Air-Turbines

    Article • International Journal of Environmental Research and Public Health, April 2021, MDPI AG

    Dr CHANDER PRAKASH

  68. Correction to: Mechanical Reliability and In Vitro Bioactivity of 3D-Printed Porous Polylactic Acid-Hydroxyapatite Scaffold

    Article • Journal of Materials Engineering and Performance, April 2021, Springer Science + Business Media

    Dr CHANDER PRAKASH

  69. Influence of tack operation on metallographic and angular distortion in electron beam welding of Ti-6l-4V alloy

    Article • Measurement, April 2021, Elsevier

    Dr CHANDER PRAKASH

  70. Investigating the Efficacy of Adhesive Tape for Drilling Carbon Fibre Reinforced Polymers

    Article • Materials, March 2021, MDPI AG

    Dr CHANDER PRAKASH

  71. Functional grading of surfaces through hybrid ultrasonic, abrasive water jet, and electric discharge machining processing

    Article • Journal of the Brazilian Society of Mechanical Sciences and Engineering, March 2021, Springer Science + Business Media

    Dr CHANDER PRAKASH

  72. Mechanical Reliability and In Vitro Bioactivity of 3D-Printed Porous Polylactic Acid-Hydroxyapatite Scaffold

    Article • Journal of Materials Engineering and Performance, March 2021, Springer Science + Business Media

    Dr CHANDER PRAKASH

  73. Comparison of microstructure and mechanical performance of laser and electron beam welded Ti6Al4V alloy

    Article • Journal of the Brazilian Society of Mechanical Sciences and Engineering, March 2021, Springer Science + Business Media

    Dr CHANDER PRAKASH

  74. Experimental investigation into nano-finishing of β-TNTZ alloy using magnetorheological fluid magnetic abrasive finishing process for orthopedic applications

    Article • Journal of Materials Research and Technology, March 2021, Elsevier

    Dr CHANDER PRAKASH

  75. Comparative job production based life cycle assessment of conventional and additive manufacturing assisted investment casting of aluminium: A case study

    Article • Journal of Cleaner Production, March 2021, Elsevier

    Dr CHANDER PRAKASH

  76. A Comparative Analysis of Laser Additive Manufacturing of High Layer Thickness Pure Ti and Inconel 718 Alloy Materials Using Finite Element Method

    Article • Materials, February 2021, MDPI AG

    Dr CHANDER PRAKASH

  77. Fused filament printing of specialized biomedical devices: a state-of-the art review of technological feasibilities with PEEK

    Article • Rapid Prototyping Journal, February 2021, Emerald

    Dr CHANDER PRAKASH

  78. On investigating the soda-lime shot blasting of AZ31 alloy: Effects on surface roughness, material removal rate, corrosion resistance, and bioactivity

    Article • Journal of Magnesium and Alloys, January 2021, Elsevier

    Dr CHANDER PRAKASH

  79. Titanium allergy in dentistry: A new allergen in rapidly evolving implant dentistry

    Article • Contemporary Clinical Dentistry, January 2021, Medknow

    Dr CHANDER PRAKASH

  80. Magneto-Rheological Fluid Assisted Abrasive Nanofinishing of β-Phase Ti-Nb-Ta-Zr Alloy: Parametric Appraisal and Corrosion Analysis

    Article • Materials, November 2020, MDPI AG

    Dr CHANDER PRAKASH

  81. Effect of cryogenic treatment on the microstructure, mechanical properties and finishability of β-TNTZ alloy for orthopedic applications

    Article • Materials Letters, November 2020, Elsevier

    Dr CHANDER PRAKASH

  82. Measurement and analysis of wind energy potential using fuzzy based hybrid MADM approach

    Article • Energy Reports, November 2020, Elsevier

    Dr CHANDER PRAKASH

  83. Innovations in Abrasive Machining

    Article • October 2020, Bentham Science Publishers

    Dr CHANDER PRAKASH

  84. Multi-objective optimization of drilling parameters for orthopaedic implants

    Article • Measurement and Control, September 2020, SAGE Publications

    Dr CHANDER PRAKASH

  85. Deposition of HA-TiO2 by plasma spray on β-phase Ti-35Nb-7Ta-5Zr alloy for hip stem: Characterization, mechanical properties, corrosion, and in-vitro bioactivity

    Article • Surface and Coatings Technology, September 2020, Elsevier

    Dr CHANDER PRAKASH

  86. 3D printed biodegradable composites: An insight into mechanical properties of PLA/chitosan scaffold

    Article • Polymer Testing, September 2020, Elsevier

    Dr CHANDER PRAKASH

  87. Characterization of indigenously coated biodegradable magnesium alloy primed through novel additive manufacturing assisted investment casting

    Article • Materials Letters, September 2020, Elsevier

    Dr CHANDER PRAKASH

  88. Synthesis of cubic boron nitride diffused-D2 steel surface composite by thermo-chemical diffusion process to enhance the wear resistance

    Article • Materials Research Express, September 2020, Institute of Physics Publishing

    Dr CHANDER PRAKASH

  89. Plasma Spray Deposition of HA-TiO2 on β-phase Ti-35Nb-7Ta-5Zr Alloy for Hip Stem: Characterization of Bio-mechanical Properties, Wettability, and Wear Resistance

    Article • Journal of Bionic Engineering, August 2020, Springer Science + Business Media

    Dr CHANDER PRAKASH

  90. 3D printed biodegradable functional temperature-stimuli shape memory polymer for customized scaffoldings

    Article • Journal of the Mechanical Behavior of Biomedical Materials, August 2020, Elsevier

    Dr CHANDER PRAKASH

  91. Three-dimensional printing in the fight against novel virus COVID-19: Technology helping society during an infectious disease pandemic

    Article • Technology in Society, August 2020, Elsevier

    Dr CHANDER PRAKASH

  92. Current status and future directions of fused filament fabrication

    Article • Journal of Manufacturing Processes, July 2020, Elsevier

    Dr CHANDER PRAKASH

  93. Application of hybrid nature-inspired algorithm: Single and bi-objective constrained optimization of magnetic abrasive finishing process parameters

    Article • Journal of Materials Research and Technology, July 2020, Elsevier

    Dr CHANDER PRAKASH

  94. Characterization of three‐dimensional printed thermal‐stimulus polylactic acid‐hydroxyapatite‐based shape memory scaffolds

    Article • Polymer Composites, June 2020, Wiley

    Dr CHANDER PRAKASH

  95. 3D printing in tissue engineering: a state of the art review of technologies and biomaterials

    Article • Rapid Prototyping Journal, June 2020, Emerald

    Dr CHANDER PRAKASH

  96. Surface Characteristics of Machined Polystyrene with 3D Printed Thermoplastic Tool

    Article • Materials, June 2020, MDPI AG

    Dr CHANDER PRAKASH

  97. Study on Technological Effects of a Precise Grooving of AlSi13MgCuNi Alloy with a Novel WCCo/PCD (DDCC) Inserts

    Article • Materials, May 2020, MDPI AG

    Dr CHANDER PRAKASH

  98. Microwave sintering of porous Ti–Nb-HA composite with high strength and enhanced bioactivity for implant applications

    Article • Journal of Alloys and Compounds, May 2020, Elsevier

    Dr CHANDER PRAKASH

  99. Machining parameter optimization in shear thickening polishing of gear surfaces

    Article • Journal of Materials Research and Technology, May 2020, Elsevier

    Dr CHANDER PRAKASH

  100. On the characterization of functionally graded biomaterial primed through a novel plaster mold casting process

    Article • Materials Science and Engineering C, May 2020, Elsevier

    Dr CHANDER PRAKASH

  101. On the mechanical characteristics of friction stir welded dissimilar polymers: statistical analysis of the processing parameters and morphological investigations of the weld joint

    Article • Journal of the Brazilian Society of Mechanical Sciences and Engineering, March 2020, Springer Science + Business Media

    Dr CHANDER PRAKASH

  102. Investigating the optimum parametric setting for MRR of expandable polystyrene machined with 3D printed end mill tool

    Article • Materials Today Proceedings, January 2020, Elsevier

    Dr CHANDER PRAKASH

  103. Development and characterization of cubic boron nitride based surface composite on D2 tool steel using thermal diffusion

    Article • Materials Today Proceedings, January 2020, Elsevier

    Dr CHANDER PRAKASH

  104. Investigating the influence of WEDM process parameters in machining of hybrid aluminum composites

    Article • Advanced Composites Letters, January 2020, SAGE Publications

    Dr CHANDER PRAKASH

  105. Effect of Intercritical Heat Treatment and Volume Fraction on the Morphological Properties, Mechanical Properties, and Work Hardening Behaviour of Dual-Phase Steel

    Article • January 2020, Springer Science + Business Media

    Dr CHANDER PRAKASH

  106. Experimental investigation and parametric optimization of HA-TiO2 plasma spray coating on β-phase titanium alloy

    Article • Materials Today Proceedings, January 2020, Elsevier

    Dr CHANDER PRAKASH

  107. Fabrication of aluminium carbon nano tube silicon carbide particles based hybrid nano-composite by spark plasma sintering

    Article • Materials Today Proceedings, January 2020, Elsevier

    Dr CHANDER PRAKASH

  108. Fabrication of low elastic modulus Ti50Nb30HA20 alloy by rapid microwave sintering technique for biomedical applications

    Article • Materials Today Proceedings, January 2020, Elsevier

    Dr CHANDER PRAKASH

  109. Processing and characterization of Al5086-Gr-SiC hybrid surface composite using friction stir technique

    Article • Materials Today Proceedings, January 2020, Elsevier

    Dr CHANDER PRAKASH

  110. Processing of Ti50Nb50−xHAx composites by rapid microwave sintering technique for biomedical applications

    Article • Journal of Materials Research and Technology, January 2020, Elsevier

    Dr CHANDER PRAKASH

  111. Fabrication and optimization of hybrid AA-6082-T6 alloy/8%Al2O3(Alumina)/2%Grp metal matrix composites using novel Box-Behnken methodology processed by wire-sinking electric discharge machining

    Article • Materials Research Express, October 2019, Institute of Physics Publishing

    Dr CHANDER PRAKASH

  112. Investigation of machining characteristics of hard-to-machine Ti-6Al-4V-ELI alloy for biomedical applications

    Article • Journal of Materials Research and Technology, September 2019, Elsevier

    Dr CHANDER PRAKASH

  113. Plasma treatment of polyether-ether-ketone: A means of obtaining desirable biomedical characteristics

    Article • European Polymer Journal, September 2019, Elsevier

    Dr CHANDER PRAKASH

  114. Experimental study on polishing process of cylindrical roller bearings

    Article • Measurement and Control, August 2019, SAGE Publications

    Thanh-Phong Dao, Dr CHANDER PRAKASH

  115. Investigation on micro-residual stress distribution near hole using nanoindentation: Effect of drilling speed

    Article • Measurement and Control, August 2019, SAGE Publications

    Dr CHANDER PRAKASH

  116. Deformation and strengthening of SiC reinforced Al-MMCs during in-situ micro-pillar compression

    Article • Materials Science and Engineering A, August 2019, Elsevier

    Dr CHANDER PRAKASH

  117. Metaheuristic approach in machinability evaluation of silicon carbide particle/glass fiber–reinforced polymer matrix composites during electrochemical discharge machining process

    Article • Measurement and Control, June 2019, SAGE Publications

    Catalin Pruncu, Dr CHANDER PRAKASH

  118. Optimizing dimensional accuracy of titanium alloy features produced by wire electrical discharge machining

    Article • Materials and Manufacturing Processes, June 2019, Taylor & Francis

    Dr Mohammad Nazrul Islam, Dr CHANDER PRAKASH

  119. On briefing the surface modifications of polylactic acid: A scope for betterment of biomedical structures

    Article • Journal of Thermoplastic Composite Materials, June 2019, SAGE Publications

    Dr CHANDER PRAKASH

  120. Dimensionless Analysis for Investigating the Quality Characteristics of Aluminium Matrix Composites Prepared through Fused Deposition Modelling Assisted Investment Casting

    Article • Materials, June 2019, MDPI AG

    Dr CHANDER PRAKASH

  121. Precision machining of biopolymers: A brief review of the literature and case study on diamond turning

    Article • Journal of Thermoplastic Composite Materials, June 2019, SAGE Publications

    Dr CHANDER PRAKASH

  122. 3D printing of polyether-ether-ketone for biomedical applications

    Article • European Polymer Journal, May 2019, Elsevier

    Dr CHANDER PRAKASH

  123. Bioprinting in ophthalmology: current advances and future pathways

    Article • Rapid Prototyping Journal, April 2019, Emerald

    Dr CHANDER PRAKASH

  124. Surface Modification of Ti-6Al-4V Alloy by Electrical Discharge Coating Process Using Partially Sintered Ti-Nb Electrode

    Article • Materials, March 2019, MDPI AG

    Dr CHANDER PRAKASH

  125. Optimization and reliability analysis to improve surface quality and mechanical characteristics of heat-treated fused filament fabricated parts

    Article • The International Journal of Advanced Manufacturing Technology, January 2019, Springer Science + Business Media

    Dr CHANDER PRAKASH

  126. Mechanical feasibility of ABS/HIPS-based multi-material structures primed by low-cost polymer printer

    Article • Rapid Prototyping Journal, January 2019, Emerald

    Dr CHANDER PRAKASH

  127. Investigation of Alloy Composition and Sintering Parameters on the Corrosion Resistance and Microhardness of 316L Stainless Steel Alloy

    Article • January 2019, Springer Science + Business Media

    Ts Ir Dr KRISHNAN SUBRAMANIAM, Dr CHANDER PRAKASH

  128. Synthesis and Characterization of Bioceramic Oxide Coating on Zr-Ti-Cu-Ni-Be BMG by Electro Discharge Process

    Article • January 2019, Springer Science + Business Media

    Dr Abdul Azeez Abdu Aliyu, Dr CHANDER PRAKASH, Prof.dr. Eugen Axinte

  129. Biomechanical Properties of Orthopedic and Dental Implants

    Article • January 2019, IGI Global

    Dr CHANDER PRAKASH

  130. Fabrication and In Vitro Corrosion Characterization of 316L Stainless Steel for Medical Application

    Article • January 2019, Springer Science + Business Media

    Dr CHANDER PRAKASH

  131. Recent Advancements in Customized Investment Castings Through Additive Manufacturing

    Article • January 2019, IGI Global

    Dr CHANDER PRAKASH

  132. Spark Plasma Sintering of Mg-Zn-Mn-Si-HA Alloy for Bone Fixation Devices

    Article • January 2019, IGI Global

    Dr CHANDER PRAKASH

  133. Evaluating Hole Quality in Drilling of Al 6061 Alloys

    Article • Materials, December 2018, MDPI AG

    Dr CHANDER PRAKASH

  134. Multi-objective particle swarm optimization of EDM parameters to deposit HA-coating on biodegradable Mg-alloy

    Article • Vacuum, December 2018, Elsevier

    Dr CHANDER PRAKASH

  135. Multi-objective parametric appraisal of pulsed current gas tungsten arc welding process by using hybrid optimization algorithms

    Article • The International Journal of Advanced Manufacturing Technology, November 2018, Springer Science + Business Media

    Dr CHANDER PRAKASH

  136. Machinability Investigations of Inconel-800 Super Alloy under Sustainable Cooling Conditions

    Article • Materials, October 2018, MDPI AG

    Dr CHANDER PRAKASH

  137. Bio-inspired low elastic biodegradable Mg-Zn-Mn-Si-HA alloy fabricated by spark plasma sintering

    Article • Materials and Manufacturing Processes, September 2018, Taylor & Francis

    Dr CHANDER PRAKASH, Dr Sarabjeet Singh Sidhu, Mohammad Uddin

  138. Synthesis, Characterization, Corrosion Resistance and In-Vitro Bioactivity Behavior of Biodegradable Mg–Zn–Mn–(Si–HA) Composite for Orthopaedic Applications

    Article • Materials, September 2018, MDPI AG

    Dr CHANDER PRAKASH

  139. Synthesis and characterization of Mg-Zn-Mn-HA composite by spark plasma sintering process for orthopedic applications

    Article • Vacuum, September 2018, Elsevier

    Dr CHANDER PRAKASH

  140. Synthesis, characterization, corrosion and bioactivity investigation of nano-HA coating deposited on biodegradable Mg-Zn-Mn alloy

    Article • Surface and Coatings Technology, July 2018, Elsevier

    Dr CHANDER PRAKASH

  141. Multi-objective Optimization of MWCNT Mixed Electric Discharge Machining of Al–30SiCp MMC Using Particle Swarm Optimization

    Article • January 2018, Springer Science + Business Media

    Dr Abdul Azeez Abdu Aliyu, Dr CHANDER PRAKASH

  142. Surface modification of β-phase Ti implant by hydroaxyapatite mixed electric discharge machining to enhance the corrosion resistance and in-vitro bioactivity

    Article • Surface and Coatings Technology, October 2017, Elsevier

    Dr CHANDER PRAKASH

  143. Fabrication and characterization of Ti-Nb-HA alloy by mechanical alloying and spark plasma sintering for hard tissue replacements

    Article • IOP Conference Series Materials Science and Engineering, August 2017, Institute of Physics Publishing

    Dr CHANDER PRAKASH

  144. Fabrication of Biodegradable Low Elastic Porous Mg-Zn-Mn-HA Alloy by Spark Plasma Sintering for Orthopaedic Applications

    Article • IOP Conference Series Materials Science and Engineering, August 2017, Institute of Physics Publishing

    Dr CHANDER PRAKASH

  145. A Review of Additive Mixed-Electric Discharge Machining: Current Status and Future Perspectives for Surface Modification of Biomedical Implants

    Article • Advances in Materials Science and Engineering, January 2017, Hindawi Publishing Corporation

    Dr CHANDER PRAKASH, Dr Abdul Azeez Abdu Aliyu, Prof.dr. Eugen Axinte

  146. Powder Mixed Electric Discharge Machining: An Innovative Surface Modification Technique to Enhance Fatigue Performance and Bioactivity of β-Ti Implant for Orthopedics Application

    Article • Journal of Computing and Information Science in Engineering, November 2016, ASME International

    Dr CHANDER PRAKASH

  147. Effect of Surface Nano-Porosities Fabricated by Powder Mixed Electric Discharge Machining on Bone-Implant Interface: An Experimental and Finite Element Study

    Article • Nanoscience and Nanotechnology Letters, October 2016, American Scientific Publishers

    Dr CHANDER PRAKASH

  148. Multi-objective optimization of powder mixed electric discharge machining parameters for fabrication of biocompatible layer on β-Ti alloy using NSGA-II coupled with Taguchi based response surface methodology

    Article • Journal of Mechanical Science and Technology, September 2016, Springer Science + Business Media

    Dr CHANDER PRAKASH

  149. Experimental investigations in powder mixed electric discharge machining of Ti–35Nb–7Ta–5Zrβ-titanium alloy

    Article • Materials and Manufacturing Processes, June 2016, Taylor & Francis

    Dr CHANDER PRAKASH

  150. Experimental and Numerical Investigation of Low-Pressure Preswirl Stator-Rotor Cooling System

    Article • June 2016, ASME International

    Dr CHANDER PRAKASH

  151. To optimize the surface roughness and microhardness of β-Ti alloy in PMEDM process using Non-dominated Sorting Genetic Algorithm-II

    Article • December 2015, Institute of Electrical & Electronics Engineers (IEEE)

    Dr CHANDER PRAKASH

  152. Potential of Powder Mixed Electric Discharge Machining to Enhance the Wear and Tribological Performance of β-Ti Implant for Orthopedic Applications

    Article • Journal of Nanoengineering and Nanomanufacturing, December 2015, American Scientific Publishers

    Dr CHANDER PRAKASH

  153. Processing and Characterization of Novel Biomimetic Nanoporous Bioceramic Surface on β-Ti Implant by Powder Mixed Electric Discharge Machining

    Article • Journal of Materials Engineering and Performance, July 2015, Springer Science + Business Media

    Dr CHANDER PRAKASH

  154. Electric discharge machining – A potential choice for surface modification of metallic implants for orthopedic applications: A review

    Article • Proceedings of the Institution of Mechanical Engineers Part B Journal of Engineering Manufacture, April 2015, SAGE Publications

    Dr CHANDER PRAKASH

  155. Analysis of Some Improved Blade Tip Concepts

    Article • Journal of Turbomachinery, February 2005, ASME International

    Dr CHANDER PRAKASH

  156. Effect of Tip Gap and Squealer Geometry on Detailed Heat Transfer Measurements Over a High Pressure Turbine Rotor Blade Tip

    Article • Journal of Turbomachinery, January 2004, ASME International

    Dr. Srinath V Ekkad, Dr CHANDER PRAKASH

  157. Prediction of Turbulent Flow and Heat Transfer in a Ribbed Rectangular Duct With and Without Rotation

    Article • Journal of Turbomachinery, April 1995, ASME International

    Dr CHANDER PRAKASH

  158. Prediction of Turbulent Flow and Heat Transfer in a Radially Rotating Square Duct

    Article • Journal of Turbomachinery, October 1992, ASME International

    Dr CHANDER PRAKASH