All Stories

  1. Experimental investigation on thermal conductivity of fly ash nanofluid and fly ash-Cu hybrid nanofluid: prediction and optimization via ANN and MGGP model
  2. Experimental determination for viscosity of fly ash nanofluid and fly ash-Cu hybrid nanofluid:Prediction and optimization using artificial intelligent techniques
  3. State of the Art of Techno-Economics of Nanofluid-Laden Flat-Plate Solar Collectors for Sustainable Accomplishment
  4. Fluid dynamic simulations of EG-W (ethylene glycol–water)​ mixtures to predict nanofluid heat transfer coefficients
  5. Experimental determination of thermophysical properties of Indonesian fly-ash nanofluid for heat transfer applications
  6. Thermophysical profile of SiC–CuO/C nanocomposite in base liquid ethylene glycol
  7. Viscosity, electrical and thermal conductivities of ethylene and propylene glycol-based β-SiC nanofluids
  8. Heat transfer performance of TiO2–SiO2 nanofluids in a tube with wire coil inserts
  9. The role of nanomaterials in the enhancement of non-concentrating solar collectors technology
  10. Experimental investigation of thermal conductivity and dynamic viscosity on nanoparticle mixture ratios of TiO2-SiO2 nanofluids
  11. Application of nanomaterials in solar thermal energy storage
  12. Properties of glycerol and ethylene glycol mixture based SiO 2 -CuO/C hybrid nanofluid for enhanced solar energy transport
  13. Experimental measurements of thermal conductivity and viscosity of ethylene glycol-based hybrid nanofluid with TiO 2 -CuO/C inclusions
  14. Rheology and thermal conductivity of non-porous silica (SiO 2 ) in viscous glycerol and ethylene glycol based nanofluids
  15. Numerical modeling of a fuel droplet for the evaluation of ignition temperature considering transport properties
  16. Improvement in Material Properties of Thermal Energy Stor age Medium with Nanostructured Materials
  17. Thermo-physical properties of Al2O3-SiO2/PAG composite nanolubricant for refrigeration system
  18. A generalized correlation for the estimation of moisture removal in fruits and grains during hot air drying
  19. Numerical simulation of nanofluids for improved cooling efficiency in a 3D copper microchannel heat sink (MCHS)
  20. Force convection heat transfer of Al 2 O 3 nanofluids for different based ratio of water: Ethylene glycol mixture
  21. Hybrid nanofluids preparation, thermal properties, heat transfer and friction factor – A review
  22. Experimental determination of nanofluid specific heat with SiO2 nanoparticles in different base fluids
  23. Investigation of thermal behaviour, pressure drop, and pumping power in a Cu nanofluid-filled solar flat-plate collector
  24. Comparison of nanofluid heat transfer properties with theory using generalized property relations for EG-water mixture
  25. A review of thermophysical properties of water based composite nanofluids
  26. Optimization of processing parameters of medium density fiberboard using response surface methodology for multiwalled carbon nanotubes as a nanofiller
  27. Effects of working temperature on thermo-physical properties and forced convection heat transfer of TiO 2 nanofluids in water – Ethylene glycol mixture
  28. Heat transfer augmentation of ethylene glycol: water nanofluids and applications — A review
  29. Experimental investigation of thermal conductivity and electrical conductivity of BioGlycol–water mixture based Al2O3 nanofluid
  30. Experimental investigation on heat transfer performance of TiO 2 nanofluids in water–ethylene glycol mixture
  31. Theoretical analysis of heat transfer and friction factor for turbulent flow of nanofluids through pipes
  32. The enhancement of effective thermal conductivity and effective dynamic viscosity of nanofluids – A review
  33. Nanofluid heat transfer under mixed convection flow in a tube for solar thermal energy applications
  34. Hot corrosion behavior of thermal spray coatings on superalloy in coal-fired boiler environment
  35. Biowaste Sago Bark Based Catalyst Free Carbon Nanospheres: Waste to Wealth Approach
  36. Wear analysis when machining AISI 304 with ethylene glycol/TIO2 nanoparticle-based coolant
  37. A decision-making approach for energy efficiency improvement in municipal water pumps during water scarcity scenario
  38. Catalyst-free synthesis of carbon nanospheres for potential biomedical applications: waste to wealth approach
  39. Thermal and mechanical properties of urea-formaldehyde (UF) resin combined with multiwalled carbon nanotubes (MWCNT) as nanofiller and fiberboards prepared by UF-MWCNT
  40. GO-TiO2 Nano Composites for Silicon PV Cell Application
  41. Heat transfer and friction factor of water based TiO2 and SiO2 nanofluids under turbulent flow in a tube
  42. Numerical validation of experimental heat transfer coefficient with SiO 2 nanofluid flowing in a tube with twisted tape inserts
  43. Comparison of convective heat transfer coefficient and friction factor of TiO2 nanofluid flow in a tube with twisted tape inserts
  44. Heat transfer augmentation of a car radiator using nanofluids
  45. Heat transfer enhancement using nanofluids in an automotive cooling system
  46. Catalyst free silica templated porous carbon nanoparticles from bio-waste materials
  47. Turbulent Forced Convection Heat Transfer of Nanofluids with Twisted Tape Insert in a Plain Tube
  48. A review of forced convection heat transfer enhancement and hydrodynamic characteristics of a nanofluid
  49. Natural Convection-Radiation from a Vertical Base-Fin Array with Emissivity Determination
  50. Diurnal Pattern and Estimation of Global Solar Radiation in East Coast Malaysia
  51. Simulation study of turbulent convective heat transfer enhancement in heated tube flow using TiO2-water nanofluid
  52. New correlations for estimation of monthly average daily solar radiation on a horizontal surface using meteorological data
  53. Experimental determination of turbulent forced convection heat transfer and friction factor with SiO2 nanofluid
  54. Influence of activated charcoal as filler on the properties of wood composites
  55. The effect of cross sectional area of tube on friction factor and heat transfer nanofluid turbulent flow
  56. Empirical and theoretical correlations on viscosity of nanofluids: A review
  57. Study of viscosity and specific heat capacity characteristics of water-based Al2O3nanofluids at low particle concentrations
  58. Use of aluminum oxide nanoparticles in wood composites to enhance the heat transfer during hot-pressing
  59. Heat Transfer Enhancement with Al2O3 Nanofluids and Twisted Tapes in a Pipe for Solar Thermal Applications
  60. The Effect of Nanofluid Volume Concentration on Heat Transfer and Friction Factor inside a Horizontal Tube
  61. Correlations for thermal conductivity and viscosity of water based nanofluids
  62. Effect of full length twisted tape inserts on heat transfer and friction factor enhancement with Fe3O4 magnetic nanofluid inside a plain tube: An experimental study
  63. Experimental investigation for enhancement of heat transfer from cooling of electronic components by circular air jet impingement
  64. Experimental investigation of forced convection heat transfer and friction factor in a tube with Fe3O4 magnetic nanofluid
  65. Experimental investigations on thermal conductivity of water and Al2O3 nanofluids at low concentrations
  66. A Comparison Study on Fuel Properties of Pretreated Pongamia and Jatropha Methyl Esters for C.I. Engine Usage
  67. The potential of wind and solar energy in Malaysia east coast: preliminary study at Universiti Malaysia Pahang (UMP)
  68. Heat transfer from a vertical fin array by laminar natural convection and radiation-A quasi-3D approach
  69. OFEM: An Optimum Finite Element Algorithm for Heat Transfer Problem in Two-dimensional Insulated-tip Rectangular Fin
  70. Tool life and wear mechanism when machining Hastelloy C-22HS
  71. Heat transfer enhancements of low volume concentration Al2O3 nanofluid and with longitudinal strip inserts in a circular tube
  72. Oxygen stripping in deaerator feed water: condensation on spray droplets
  73. Correlation for Heat Transfer in Nucleate Boiling on Horizontal Cylindrical Surface
  74. Turbulent heat transfer and friction factor of Al2O3 Nanofluid in circular tube with twisted tape inserts
  75. Estimation of heat transfer coefficient and friction factor in the transition flow with low volume concentration of Al2O3 nanofluid flowing in a circular tube and with twisted tape insert
  76. Turbulent forced convection of Al2O3 nanofluid in a circular tube with tape inserts at low volume concentration
  77. Convective condensation of vapor in the presence of a non-condensable gas of high concentration in laminar flow in a vertical pipe
  78. Convective Condensation of Vapor in Laminar Flow in a Vertical Parallel Plate Channel in the Presence of a High-Concentration Noncondensable Gas
  79. A correlation to predict heat transfer coefficient in nucleate boiling on cylindrical heating elements
  80. Experimental Investigation of Heat Transfer and Friction Factor Characteristics in a Circular Tube with Longitudinal Strip Inserts
  81. Thermal conductivity enhancement of nanoparticles in distilled water
  82. A Theoretical Study on Convective Condensation of Water Vapor From Humid Air in Turbulent Flow in a Vertical Duct
  83. Performance study of an evaporator tube working under high heat fluxes
  84. Heat transfer from a horizontal fin array by natural convection and radiation—A conjugate analysis
  85. A correlation to evaluate critical heat flux in small diameter tubes under subcooled conditions of the coolant
  86. Turbulent film boiling from a vertical non-isothermal surface
  87. Laminar film boiling on a vertical fin
  88. LAMINAR FILM BOILING ON A VERTICAL SURFACE WITH THERMAL LEAKAGE AT ITS ENDS