All Stories

  1. Effect of Storage Time on the Structure and Mechanical Properties of Starch/Bentonite Nanocomposites

    Article • Starch - Stärke, September 2018, Wiley

    Professor Jozsef Karger-Kocsis

  2. Mechanical, thermal, and water absorption properties of melamine-formaldehyde-treated sisal fiber containing polylactic acid composites

    Article • Journal of Applied Polymer Science, August 2017, Wiley

    Professor Jozsef Karger-Kocsis

  3. Polymer/boehmite nanocomposites: A review

    Article • Journal of Applied Polymer Science, August 2017, Wiley

    Professor Jozsef Karger-Kocsis

  4. Vinyl Ester Resin Modified with Acrylated Epoxidised Soybean (AESO) and Linseed (AELO) Oils: Effect of Additional Urethane Crosslinking

    Article • Polymers and Polymer Composites, June 2017, SAGE Publications

    Professor Jozsef Karger-Kocsis

  5. Failure Assessment and Evaluation of Damage Development and Crack Growth in Polymer Composites Via Localization of Acoustic Emission Events: A Review

    Article • Polymer Reviews, March 2017, Taylor & Francis

    Professor Jozsef Karger-Kocsis

  6. Natural rubber/graphene oxide nanocomposites via melt and latex compounding: Comparison at very low graphene oxide content

    Article • Journal of Reinforced Plastics and Composites, February 2017, SAGE Publications

    Professor Jozsef Karger-Kocsis

  7. Effect of an Ionic Liquid on the Flexural and Fracture Mechanical Properties of EP/MWCNT Nanocomposites

    Article • Materials Science Forum, February 2017, Trans Tech Publications

    Professor Jozsef Karger-Kocsis

  8. Preparation and Properties of Thermoplastic Starch/Bentonite Nanocomposites

    Article • Materials Science Forum, February 2017, Trans Tech Publications

    Professor Jozsef Karger-Kocsis

  9. Tensile and Fracture Mechanical Properties of Styrene-Butadiene Rubbers (SBR) Filled with Industrial and Pyrolytic Carbon Blacks, and Organoclay

    Article • Materials Science Forum, February 2017, Trans Tech Publications

    Professor Jozsef Karger-Kocsis

  10. Gas barrier properties of oxyfluorinated graphene filled polytetrafluoroethylene nanocomposites

    Article • Carbon, November 2016, Elsevier

    Professor Jozsef Karger-Kocsis

  11. Fracture behavior and damage development in self-reinforced PET composites assessed by located acoustic emission and thermography: Effects of flame retardant and recycled PET

    Article • Composites Science and Technology, August 2016, Elsevier

    Professor Jozsef Karger-Kocsis

  12. Shape memory crosslinked polyurethanes containing thermoreversible Diels-Alder couplings

    Article • Journal of Applied Polymer Science, July 2016, Wiley

    Professor Jozsef Karger-Kocsis

  13. Comparative Properties of Styrene-Butadiene Rubbers (SBR) Containing Pyrolytic Carbon Black, Conventional Carbon Black, and Organoclay

    Article • Journal of Macromolecular Science Part B, June 2016, Taylor & Francis

    Professor Jozsef Karger-Kocsis

  14. Surface tailored PS/TiO2 composite nanofiber membrane for copper removal from water

    Article • Journal of Colloid and Interface Science, May 2016, Elsevier

    Professor Jozsef Karger-Kocsis

  15. Self-healing properties of epoxy resins with poly(ε-caprolactone) healing agent

    Article • Polymer Bulletin, March 2016, Springer Science + Business Media

    Professor Jozsef Karger-Kocsis

  16. Challenges in fracture toughness modelling of nanocomposites

    Article • eXPRESS Polymer Letters, February 2016, Department of Polymer Engineering, Scientific Society of Mechanical Engineering

    Professor Jozsef Karger-Kocsis

  17. "Ultralow" sliding wear polytetrafluoro ethylene nanocomposites with functionalized graphene

    Article • Journal of Reinforced Plastics and Composites, February 2016, SAGE Publications

    Professor Jozsef Karger-Kocsis

  18. Preparation of PTFE/graphene nanocomposites by compression moulding and free sintering: A guideline

    Article • Journal of Applied Polymer Science, January 2016, Wiley

    Mr Louis Johann van Rooyen, Professor Jozsef Karger-Kocsis

  19. Uncatalyzed reactions of 4,4′-diphenylmethane-diisocyanate with polymer polyols as revealed by matrix-assisted laser desorption/ionization mass spectrometry

    Article • RSC Advances, January 2016, Royal Society of Chemistry

    Professor Jozsef Karger-Kocsis

  20. (Multi)functional polymers and composites via Diels-Alder reactions

    Article • eXPRESS Polymer Letters, January 2016, Department of Polymer Engineering, Scientific Society of Mechanical Engineering

    Professor Jozsef Karger-Kocsis

  21. Mechanical and abrasion wear properties of hydrogenated nitrile butadiene rubber of identical hardness filled with carbon black and silica

    Article • Journal of Reinforced Plastics and Composites, October 2015, SAGE Publications

    Professor Jozsef Karger-Kocsis

  22. Recent advances in fiber/matrix interphase engineering for polymer composites

    Article • Progress in Materials Science, August 2015, Elsevier

    Professor Jozsef Karger-Kocsis

  23. Dynamic mechanical properties of immiscible polymer systems with and without compatibilizer

    Article • Polymer Testing, July 2015, Elsevier

    Professor Jozsef Karger-Kocsis

  24. Helium gas barrier properties of graphene/epoxy nanocomposites

    Article • Journal of Applied Polymer Science, June 2015, Wiley

    Mr Louis Johann van Rooyen, Professor Jozsef Karger-Kocsis

  25. Production and characterization of microfibrillated cellulose-reinforced thermoplastic starch composites

    Article • Journal of Applied Polymer Science, May 2015, Wiley

    Professor Jozsef Karger-Kocsis

  26. Shape Memory Systems with Biodegradable Polyesters

    Article • March 2015, Wiley

    Professor Jozsef Karger-Kocsis

  27. New insight into the kinetics of diisocyanate-alcohol reactions by high-performance liquid chromatography and mass spectrometry

    Article • Journal of Applied Polymer Science, March 2015, Wiley

    Professor Jozsef Karger-Kocsis

  28. Production and properties of micro-cellulose reinforced thermoplastic starch

    Article • IOP Conference Series Materials Science and Engineering, February 2015, Institute of Physics Publishing

    Professor Jozsef Karger-Kocsis

  29. An approach to predict the shape-memory behavior of amorphous polymers from Dynamic Mechanical Analysis (DMA) data

    Article • Mechanics of Time-Dependent Materials, January 2015, Springer Science + Business Media

    Professor Jozsef Karger-Kocsis

  30. Recent advances in shape memory epoxy resins and composites

    Article • January 2015, Elsevier

    Professor Jozsef Karger-Kocsis

  31. Water-Assisted Production of Thermoplastic Nanocomposites: A Review

    Article • Materials, December 2014, MDPI AG

    Professor Jozsef Karger-Kocsis

  32. Dielectric relaxations in polyoxymethylene and in related nanocomposites: Identification and molecular dynamics

    Article • Polymer, December 2014, Elsevier

    Professor Jozsef Karger-Kocsis

  33. Toughened carbon fiber fabric-reinforced pCBT composites

    Article • Polymer Composites, November 2014, Wiley

    Professor Jozsef Karger-Kocsis

  34. Water glass – an alternative precursor for sol-gel derived silica nanofiller in polymer composites?

    Article • eXPRESS Polymer Letters, October 2014, Department of Polymer Engineering, Scientific Society of Mechanical Engineering

    Professor Jozsef Karger-Kocsis

  35. Poly(ε-caprolactone) and Pluronic Diol-Containing Segmented Polyurethanes for Shape Memory Performance

    Article • Macromolecular Chemistry and Physics, August 2014, Wiley

    Professor Jozsef Karger-Kocsis

  36. Rheology of multiphase polymer blends with and without reactive compatibiliser: evaluation of interfacial tension using theoretical predictions

    Article • International Journal of Plastics Technology, July 2014, Springer Science + Business Media

    Professor Jozsef Karger-Kocsis

  37. Thermal, viscoelastic and mechanical behavior of polypropylene with synthetic boehmite alumina nanoparticles

    Article • Polymer Testing, May 2014, Elsevier

    Dr Diego Pedrazzoli, Professor Jozsef Karger-Kocsis

  38. HNBR and its MWCNT reinforced nanocomposites: Crystalline morphology and electrical response

    Article • European Polymer Journal, May 2014, Elsevier

    Professor Jozsef Karger-Kocsis

  39. Reviewing: Why, when, what and how?

    Article • eXPRESS Polymer Letters, April 2014, Department of Polymer Engineering, Scientific Society of Mechanical Engineering

    Professor Jozsef Karger-Kocsis

  40. Toughening linear low-density polyethylene with halloysite nanotubes

    Article • Polymer Composites, April 2014, Wiley

    Dr Diego Pedrazzoli, Professor Jozsef Karger-Kocsis

  41. Biodegradable polyester-based shape memory polymers: Concepts of (supra)molecular architecturing

    Article • eXPRESS Polymer Letters, April 2014, Department of Polymer Engineering, Scientific Society of Mechanical Engineering

    Professor Jozsef Karger-Kocsis

  42. Single-Polymer Composites: Concepts, Realization and Outlook: Review

    Article • KMUTNB International Journal of Applied Science and Technology, March 2014, King Mongkut's University of Technology North Bangkok

    Professor Jozsef Karger-Kocsis

  43. Single-polymer composites (SPCs): Status and future trends

    Article • Composites Science and Technology, February 2014, Elsevier

    Professor Jozsef Karger-Kocsis

  44. Fracture behavior of boehmite-filled polypropylene block copolymer nanocomposites as assessed by the essential work of fracture concept

    Article • Journal of Applied Polymer Science, January 2014, Wiley

    Professor Jozsef Karger-Kocsis, Dr. Laszlo Meszaros

  45. Mechanical and dynamic mechanical properties of polyolefin blends: effect of blend ratio and copolymer monomer fraction on the compatibilisation efficiency of random copolymers

    Article • Journal of Polymer Research, November 2013, Springer Science + Business Media

    Professor Jozsef Karger-Kocsis

  46. Thermooxidative degradation of LDPE nanocomposites: Effect of surface treatments of fumed silica and boehmite alumina

    Article • Polymer Degradation and Stability, November 2013, Elsevier

    Professor Jozsef Karger-Kocsis

  47. Epoxy/Polycaprolactone Systems with Triple-Shape Memory Effect: Electrospun Nanoweb with and without Graphene Versus Co-Continuous Morphology

    Article • Materials, October 2013, MDPI AG

    Professor Jozsef Karger-Kocsis

  48. Mechanical and rheological response of polypropylene/boehmite nanocomposites

    Article • Journal of Reinforced Plastics and Composites, October 2013, SAGE Publications

    Dr Diego Pedrazzoli, Professor Jozsef Karger-Kocsis

  49. Temperature-Induced Shape Memory Characteristics of Epoxy Resin-Based Fabric-Reinforced Composites

    Article • Advanced Materials Research, August 2013, Trans Tech Publications

    Professor Jozsef Karger-Kocsis

  50. Effects of fibre content and textile structure on dynamic-mechanical and shape-memory properties of ELO/flax biocomposites

    Article • Journal of Reinforced Plastics and Composites, July 2013, SAGE Publications

    Professor Jozsef Karger-Kocsis

  51. On the toughness of thermoplastic polymer nanocomposites as assessed by the essential work of fracture (EWF) approach

    Article • Composite Interfaces, June 2013, Taylor & Francis

    Professor Jozsef Karger-Kocsis

  52. Curing, gelling, thermomechanical, and thermal decomposition behaviors of anhydride-cured epoxy (DGEBA)/epoxidized soybean oil compositions

    Article • Polymer Engineering & Science, May 2013, Wiley

    Professor Jozsef Karger-Kocsis

  53. Helium gas permeability reduction of epoxy composite coatings by incorporation of glass flakes

    Article • Journal of Membrane Science, March 2013, Elsevier

    Professor Jozsef Karger-Kocsis

  54. Waste tyre rubber – what to do next?

    Article • eXPRESS Polymer Letters, March 2013, Department of Polymer Engineering, Scientific Society of Mechanical Engineering

    Professor Jozsef Karger-Kocsis

  55. Essential work of fracture of poly(ϵ-caprolactone)/boehmite alumina nanocomposites: Effect of surface coating

    Article • Journal of Applied Polymer Science, February 2013, Wiley

    Professor Jozsef Karger-Kocsis

  56. Binary and ternary composites of polystyrene, styrene–butadiene rubber and boehmite produced by water-mediated melt compounding: Morphology and mechanical properties

    Article • Composites Part B Engineering, February 2013, Elsevier

    Professor Jozsef Karger-Kocsis

  57. Carbon dioxide ‘management’ by polymers

    Article • eXPRESS Polymer Letters, January 2013, Department of Polymer Engineering, Scientific Society of Mechanical Engineering

    Professor Jozsef Karger-Kocsis

  58. Rigid bio-foam plastics with intrinsic flame retardancy derived from soybean oil

    Article • Journal of Materials Chemistry A, January 2013, Royal Society of Chemistry

    Professor Jozsef Karger-Kocsis

  59. Sliding friction and wear of “nanomodified” and coated rubbers

    Article • January 2013, Elsevier

    Professor Jozsef Karger-Kocsis

  60. Preparation and characterization of in situ polymerized cyclic butylene terephthalate/graphene nanocomposites

    Article • Journal of Materials Science, November 2012, Springer Science + Business Media

    Professor Jozsef Karger-Kocsis

  61. Injection moulded all-polypropylene composites composed of polypropylene fibre and polypropylene based thermoplastic elastomer

    Article • Composites Science and Technology, November 2012, Elsevier

    Professor Jozsef Karger-Kocsis

  62. Rheological properties of ground rubber tire filled isotactic polypropylenes of different molecular weight characteristics

    Article • Journal of Reinforced Plastics and Composites, October 2012, SAGE Publications

    Professor Jozsef Karger-Kocsis

  63. Shape memory characteristics of woven glass fibre fabric reinforced epoxy composite in flexure

    Article • Journal of Reinforced Plastics and Composites, October 2012, SAGE Publications

    Professor Jozsef Karger-Kocsis

  64. Gelling and curing behaviors of benzoxazine/epoxy formulations containing 4,4′-thiodiphenol accelerator

    Article • Thermochimica Acta, September 2012, Elsevier

    Professor Jozsef Karger-Kocsis

  65. Polymorphism- and Stereoregularity-Based Single Polymer Composites

    Article • August 2012, Carl Hanser Verlag

    Professor Jozsef Karger-Kocsis

  66. Structure and Fracture Mechanics of Injection-Molded Composites

    Article • July 2012, Wiley

    Professor Jozsef Karger-Kocsis

  67. Structure, thermal, and mechanical properties of DDM-hardened epoxy/benzoxazine hybrids: Effects of epoxy resin functionality and ETBN toughening

    Article • Journal of Applied Polymer Science, June 2012, Wiley

    Professor Jozsef Karger-Kocsis

  68. Ground tyre rubber (GTR) in thermoplastics, thermosets, and rubbers

    Article • Journal of Materials Science, June 2012, Springer Science + Business Media

    Professor Jozsef Karger-Kocsis

  69. Thermomechanical properties and morphology of polyethylene oxide and phenolic resole blends

    Article • Journal of Applied Polymer Science, May 2012, Wiley

    Professor Jozsef Karger-Kocsis

  70. Grafting of maleic anhydride onto an ethylene-propylene-diene terpolymer and concurrent organoclay nanocomposite preparation in solution and melt

    Article • Journal of Applied Polymer Science, May 2012, Wiley

    Professor Jozsef Karger-Kocsis

  71. Knowledge and technology transfer: What is going on?

    Article • eXPRESS Polymer Letters, May 2012, Department of Polymer Engineering, Scientific Society of Mechanical Engineering

    Professor Jozsef Karger-Kocsis

  72. Polyolefin Fiber- and Tape-Reinforced Polymeric Composites

    Article • March 2012, Wiley

    Professor Jozsef Karger-Kocsis

  73. Energy transfer and photoactivity of photozymes included in polyacrylate hydrogels

    Article • Journal of Applied Polymer Science, February 2012, Wiley

    Professor Jozsef Karger-Kocsis

  74. Polystyrene nanocomposites produced by melt-compounding with polymer-coated magnesium carbonate nanoparticles

    Article • Journal of Reinforced Plastics and Composites, January 2012, SAGE Publications

    Professor Jozsef Karger-Kocsis

  75. Modification of vinyl ester and vinyl ester–urethane resin-based bulk molding compounds (BMC) with acrylated epoxidized soybean and linseed oils

    Article • Journal of Materials Science, December 2011, Springer Science + Business Media

    Professor Jozsef Karger-Kocsis

  76. Dynamic mechanical properties and structure of in situ cured polyurethane/hydrogenated nitrile rubber compounds: Effect of carbon black type

    Article • Journal of Applied Polymer Science, December 2011, Wiley

    Professor Jozsef Karger-Kocsis

  77. Structure and properties of amine-hardened epoxy/benzoxazine hybrids: Effect of epoxy resin functionality

    Article • Journal of Applied Polymer Science, November 2011, Wiley

    Professor Jozsef Karger-Kocsis

  78. Effect of cure regime on internal strain and stress development in a filled epoxy resin assessed by fiber Bragg-grating optical strain and normal force measurements

    Article • Journal of Reinforced Plastics and Composites, September 2011, SAGE Publications

    Professor Jozsef Karger-Kocsis

  79. ‘Greening’ of unsaturated polyester resin based bulk molding compound with acrylated epoxidized soybean and linseed oils: effect of urethane hybridization

    Article • Journal of Reinforced Plastics and Composites, September 2011, SAGE Publications

    Professor Jozsef Karger-Kocsis

  80. Rubber-Clay Nanocomposites based on Nitrile Rubber

    Article • August 2011, Wiley

    Professor Jozsef Karger-Kocsis

  81. Rubber-Clay Nanocomposites based on Apolar Diene Rubber

    Article • August 2011, Wiley

    Professor Jozsef Karger-Kocsis

  82. Structure and properties of vinyl ester resins modified with organophilic synthetic layered silicates bearing non- and co-reactive intercalants

    Article • Journal of Composite Materials, August 2011, SAGE Publications

    Professor Jozsef Karger-Kocsis

  83. Structure and toughness of polyethersulfone (PESU)-modified anhydride-cured tetrafunctional epoxy resin: Effect of PESU molecular mass

    Article • Journal of Applied Polymer Science, August 2011, Wiley

    Professor Jozsef Karger-Kocsis

  84. Structure, mechanical, and fracture properties of nanoreinforced and HNBR-toughened polyamide-6

    Article • Journal of Applied Polymer Science, August 2011, Wiley

    Professor Jozsef Karger-Kocsis

  85. Dielectric relaxation phenomena and dynamics in polyoxymethylene/polyurethane/alumina hybrid nanocomposites

    Article • Polymer International, July 2011, Wiley

    Professor Jozsef Karger-Kocsis

  86. pCBT/MWCNT Nanocomposites Prepared by In situ Polymerization of CBT After Solid-Phase High-Energy Ball Milling of CBT with MWCNT

    Article • Macromolecular Materials and Engineering, February 2011, Wiley

    Professor Jozsef Karger-Kocsis

  87. Shape memory polymer system of semi-interpenetrating network structure composed of crosslinked poly (methyl methacrylate) and poly (ethylene oxide)

    Article • Polymer, February 2011, Elsevier

    Professor Jozsef Karger-Kocsis

  88. Liquefaction of plant biomass for use in polymers - is it the right strategy?

    Article • eXPRESS Polymer Letters, January 2011, Department of Polymer Engineering, Scientific Society of Mechanical Engineering

    Professor Jozsef Karger-Kocsis

  89. Friction and Wear of Rubber Nanocomposites Containing Layered Silicates and Carbon Nanotubes

    Article • January 2011, Springer Science + Business Media

    Professor Jozsef Karger-Kocsis

  90. Dynamic Mechanical and Perforation Impact Behavior of All-PP Composites Containing Beta-Nucleated Random PP Copolymer as Matrix and Stretched PP Homopolymer Tape as Reinforcement: Effect of Draw Ratio of the Tape

    Article • Journal of Thermoplastic Composite Materials, December 2010, SAGE Publications

    Professor Jozsef Karger-Kocsis

  91. Synergetic effect of carbon nanofibers and short carbon fibers on the mechanical and fracture properties of epoxy resin

    Article • Carbon, December 2010, Elsevier

    Professor Jozsef Karger-Kocsis

  92. Self-reinforced polymeric materials: A review

    Article • Progress in Polymer Science, October 2010, Elsevier

    Professor Jozsef Karger-Kocsis

  93. Application of the essential work of fracture (EWF) concept for polymers, related blends and composites: A review

    Article • Progress in Polymer Science, October 2010, Elsevier

    Professor Jozsef Karger-Kocsis

  94. Polyethylene/synthetic boehmite alumina nanocomposites: structure, mechanical, and perforation impact properties

    Article • Journal of Materials Science, September 2010, Springer Science + Business Media

    Professor Jozsef Karger-Kocsis

  95. Swelling, compression and tribological behaviors of bentonite-modified polyacrylate-type hydrogels

    Article • Journal of Applied Polymer Science, July 2010, Wiley

    Professor Jozsef Karger-Kocsis

  96. Hybrid thermosets from polyisocyanate/water glass/emulsifier systems: Effects of melamine-formaldehyde resin

    Article • Journal of Applied Polymer Science, July 2010, Wiley

    Professor Jozsef Karger-Kocsis

  97. Effect of modified layered silicates on the confined crystalline morphology and thermomechanical properties of poly(ethylene oxide) nanocomposites

    Article • Journal of Applied Polymer Science, June 2010, Wiley

    Professor Jozsef Karger-Kocsis

  98. Mechanical and stress relaxation behavior of Santoprene® thermoplastic elastomer/boehmite alumina nanocomposites produced by water-mediated and direct melt compounding

    Article • Composites Part A Applied Science and Manufacturing, June 2010, Elsevier

    Professor Jozsef Karger-Kocsis

  99. Changes in tribological performance of high molecular weight high density polyethylene induced by the addition of molybdenum disulphide particles

    Article • Wear, May 2010, Elsevier

    Professor Jozsef Karger-Kocsis

  100. Unlubricated rolling and sliding wear against steel of carbon-black-reinforced andin situcured polyurethane containing ethylene/propylene/diene rubber compounds

    Article • Journal of Applied Polymer Science, February 2010, Wiley

    Professor Jozsef Karger-Kocsis

  101. Mechanical and tribological properties of rubber blends composed of HNBR and in situ produced polyurethane

    Article • Wear, February 2010, Elsevier

    Professor Jozsef Karger-Kocsis

  102. Preparation and characterization of polypropylene homocomposites: Exploiting polymorphism of PP homopolymer

    Article • Journal of Applied Polymer Science, January 2010, Wiley

    Professor Jozsef Karger-Kocsis

  103. Hybrid resins from polyisocyanate, epoxy resin and water glass: chemistry, structure and properties

    Article • Journal of Materials Science, January 2010, Springer Science + Business Media

    Professor Jozsef Karger-Kocsis

  104. POM/PU/carbon nanofiber composites produced by water-mediated melt compounding: Structure, thermomechanical and dielectrical properties

    Article • Journal of Applied Polymer Science, January 2010, Wiley

    Professor Jozsef Karger-Kocsis

  105. Rolling and sliding wear properties of hybrid systems composed of uncured/cured HNBR and partly polymerized cyclic butylene terephthalate (CBT)

    Article • Tribology International, January 2010, Elsevier

    Professor Jozsef Karger-Kocsis

  106. Dry rolling and sliding friction and wear of organophilic layered silicate/hydrogenated nitrile rubber nanocomposite

    Article • Journal of Materials Science, December 2009, Springer Science + Business Media

    Professor Jozsef Karger-Kocsis

  107. Thermoset polymers containing bio-based renewable resources

    Article • eXPRESS Polymer Letters, October 2009, Department of Polymer Engineering, Scientific Society of Mechanical Engineering

    Professor Jozsef Karger-Kocsis

  108. Dispersion of TiO2Particles in PET/PP/TiO2and PET/PP/PP-g-MA/TiO2Composites Prepared with Different Blending Procedures

    Article • Macromolecular Materials and Engineering, September 2009, Wiley

    Professor Jozsef Karger-Kocsis

  109. Compatibilization effect of TiO2 nanoparticles on the phase structure of PET/PP/TiO2 nanocomposites

    Article • Journal of Polymer Science Part B Polymer Physics, July 2009, Wiley

    Professor Jozsef Karger-Kocsis

  110. Novel method for dispersion of multiwall carbon nanotubes in poly(ethylene oxide) matrix using dicarboxylic acid salts

    Article • Journal of Polymer Science Part B Polymer Physics, May 2009, Wiley

    Professor Jozsef Karger-Kocsis

  111. Nano- and Micromechanics of Polymer Blends and Composites

    Article • May 2009, Carl Hanser Verlag

    Professor Jozsef Karger-Kocsis

  112. Nano- and Micromechanics of Polymer Blends and Composites

    Article • May 2009, Carl Hanser Verlag

    Professor Jozsef Karger-Kocsis

  113. On the Toughness of “Nanomodified” Polymers and Their Traditional Polymer Composites

    Article • May 2009, Carl Hanser Verlag

    Professor Jozsef Karger-Kocsis

  114. Unlubricated rolling wear of HNBR/FKM/MWCNT compounds against steel

    Article • Journal of Applied Polymer Science, May 2009, Wiley

    Professor Jozsef Karger-Kocsis

  115. Tensile mechanical and perforation impact behavior of all-PP composites containing random PP copolymer as matrix and stretched PP homopolymer as reinforcement: Effect of β nucleation of the matrix

    Article • Composites Part A Applied Science and Manufacturing, May 2009, Elsevier

    Professor Jozsef Karger-Kocsis

  116. Impact resistance of all-polypropylene composites composed of alpha and beta modifications

    Article • Polymer Testing, April 2009, Elsevier

    Professor Jozsef Karger-Kocsis

  117. Hybrids from HNBR and in situ polymerizable cyclic butylene terephthalate (CBT): Structure and rolling wear properties

    Article • European Polymer Journal, April 2009, Elsevier

    Professor Jozsef Karger-Kocsis

  118. Structure and creep response of toughened and nanoreinforced polyamides produced via the latex route: Effect of nanofiller type

    Article • Composites Science and Technology, April 2009, Elsevier

    Professor Jozsef Karger-Kocsis

  119. Poly (butylene terephthalate)/silica nanocomposites prepared from cyclic butylene terephthalate

    Article • Composites Part A Applied Science and Manufacturing, March 2009, Elsevier

    Professor Jozsef Karger-Kocsis

  120. Structure and properties of poly(ethylene oxide)-organo clay nanocomposite prepared via melt mixing

    Article • Polymer Engineering & Science, December 2008, Wiley

    Professor Jozsef Karger-Kocsis

  121. Rheological and thermal properties of poly(ethylene oxide)/multiwall carbon nanotube composites

    Article • Journal of Applied Polymer Science, November 2008, Wiley

    Professor Jozsef Karger-Kocsis

  122. Polyoxymethylene/polyurethane/alumina ternary composites: Structure, mechanical, thermal and dielectric properties

    Article • Journal of Applied Polymer Science, November 2008, Wiley

    Professor Jozsef Karger-Kocsis

  123. Cure-induced Normal Force Development in Unfilled and Filled Epoxy Resins

    Article • Journal of Composite Materials, November 2008, SAGE Publications

    Professor Jozsef Karger-Kocsis

  124. Isothermal and non-isothermal crystallisation kinetics of pCBT and PBT

    Article • Journal of Thermal Analysis and Calorimetry, September 2008, Springer Science + Business Media

    Professor Jozsef Karger-Kocsis

  125. Structure-stress relaxation relationship in polystyrene/fluorohectorite micro-and nanocomposites

    Article • Mechanics of Composite Materials, September 2008, Springer Science + Business Media

    Professor Jozsef Karger-Kocsis

  126. Unlubricated sliding and rolling wear of thermoplastic dynamic vulcanizates (Santoprene®) against steel

    Article • Wear, July 2008, Elsevier

    Professor Jozsef Karger-Kocsis

  127. Hybrids of HNBR and in situ polymerizable cyclic butylene terephthalate (CBT) oligomers: properties and dry sliding behavior

    Article • eXPRESS Polymer Letters, June 2008, Department of Polymer Engineering, Scientific Society of Mechanical Engineering

    Professor Jozsef Karger-Kocsis

  128. Hybrid resins from polyisocyanate, vinyl ester, melamine formaldehyde and water glass: structure and properties

    Article • Plastics Rubber and Composites Macromolecular Engineering, June 2008, Taylor & Francis

    Professor Jozsef Karger-Kocsis

  129. Rolling wear of EPDM and SBR rubbers as a function of carbon black contents: correlation with microhardness

    Article • Journal of Materials Science, June 2008, Springer Science + Business Media

    Professor Jozsef Karger-Kocsis

  130. Thermal degradation and crystallisation studies of reactively compatibilised polymer blends

    Article • Polymer Degradation and Stability, June 2008, Elsevier

    Professor Jozsef Karger-Kocsis

  131. Dynamic mechanical thermal analysis of all-PP composites based on β and α polymorphic forms

    Article • Journal of Materials Science, May 2008, Springer Science + Business Media

    Professor Jozsef Karger-Kocsis

  132. Tribological testing of peroxide-cured EPDM rubbers with different carbon black contents under dry sliding conditions against steel

    Article • Tribology International, May 2008, Elsevier

    Professor Jozsef Karger-Kocsis

  133. Water-mediated dispersion of 'nanofillers' in termoplastics: Is it the right way?

    Article • eXPRESS Polymer Letters, April 2008, Department of Polymer Engineering, Scientific Society of Mechanical Engineering

    Professor Jozsef Karger-Kocsis

  134. Thermomechanical and Rheological Properties of High-Molecular-Weight Poly(ethylene oxide)/Novolac Blends

    Article • Macromolecular Chemistry and Physics, February 2008, Wiley

    Professor Jozsef Karger-Kocsis

  135. Dry friction and sliding wear of EPDM rubbers against steel as a function of carbon black content

    Article • Wear, February 2008, Elsevier

    Professor Jozsef Karger-Kocsis

  136. Friction and sliding wear of “nanomodified” rubbers and their coatings: Some new developments

    Article • January 2008, Elsevier

    Professor Jozsef Karger-Kocsis

  137. Flexural creep of all-polypropylene composites: Model analysis

    Article • Polymer Engineering & Science, January 2008, Wiley

    Professor Jozsef Karger-Kocsis

  138. Crystallization-induced shrinkage, crystalline, and thermomechanical properties ofin situ polymerized cyclic butylene terephthalate

    Article • Journal of Applied Polymer Science, January 2008, Wiley

    Professor Jozsef Karger-Kocsis

  139. Studies on polyethylene oxide and phenolic resin blends

    Article • Journal of Applied Polymer Science, January 2008, Wiley

    Professor Jozsef Karger-Kocsis

  140. Tribological behavior of a carbon-nanofiber-modified santoprene thermoplastic elastomer under dry sliding and fretting conditions against steel

    Article • Journal of Applied Polymer Science, January 2008, Wiley

    Professor Jozsef Karger-Kocsis

  141. Effects of blend composition and dynamic vulcanization on the morphology and dynamic viscoelastic properties of PP/EPDM blends

    Article • Journal of Applied Polymer Science, January 2008, Wiley

    Professor Jozsef Karger-Kocsis

  142. Tribological testing of peroxide cured HNBR with different MWCNT and silica contents under dry sliding and rolling conditions against steel

    Article • Journal of Applied Polymer Science, January 2008, Wiley

    Professor Jozsef Karger-Kocsis

  143. Flexural Creep Behavior of Unidirectional and Cross-Ply All-Poly(propylene) (PURE®) Composites

    Article • Macromolecular Materials and Engineering, October 2007, Wiley

    Professor Jozsef Karger-Kocsis

  144. Recent advances in shape memory polymers and composites: a review

    Article • Journal of Materials Science, October 2007, Springer Science + Business Media

    Professor Jozsef Karger-Kocsis

  145. Silk-Containing Polymeric Systems

    Article • May 2007, Carl Hanser Verlag

    Professor Jozsef Karger-Kocsis

  146. Influence of Cure Regime on the Strain Development in an Epoxy Resin as Monitored by a Fiber Bragg Grating Sensor

    Article • Macromolecular Materials and Engineering, April 2007, Wiley

    Professor Jozsef Karger-Kocsis

  147. Influence of fillers and additives on the cure kinetics of an epoxy/anhydride resin

    Article • European Polymer Journal, April 2007, Elsevier

    Professor Jozsef Karger-Kocsis

  148. Effect of the aspect ratio of silicate platelets on the mechanical and barrier properties of hydrogenated acrylonitrile butadiene rubber (HNBR)/layered silicate nanocomposites

    Article • European Polymer Journal, April 2007, Elsevier

    Professor Jozsef Karger-Kocsis

  149. Thermoset polyurea resins with in situ produced silicate filler from water glass: effects of water dispersible alumina nanoparticles

    Article • Plastics Rubber and Composites Macromolecular Engineering, April 2007, Taylor & Francis

    Professor Jozsef Karger-Kocsis

  150. Hybrid resins from polyisocyanate/vinyl ester/water glass systems: Structure and properties

    Article • European Polymer Journal, April 2007, Elsevier

    Professor Jozsef Karger-Kocsis

  151. Trends - the future belongs to hybrid thermosets

    Article • eXPRESS Polymer Letters, March 2007, Department of Polymer Engineering, Scientific Society of Mechanical Engineering

    Professor Jozsef Karger-Kocsis

  152. DSC studies on the activated anionic polymerization of ϵ-caprolactam in the presence of crown compounds

    Article • Journal of Polymer Science Polymer Symposia, March 2007, Wiley

    Professor Jozsef Karger-Kocsis

  153. Mechanical properties of woven glass fabric reinforced in situ polymerized poly(butylene terephthalate) composites

    Article • Composites Science and Technology, March 2007, Elsevier

    Professor Jozsef Karger-Kocsis

  154. Melting and crystallization of in-situ polymerized cyclic butylene terephthalates with and without organoclay: a modulated DSC study

    Article • eXPRESS Polymer Letters, February 2007, Department of Polymer Engineering, Scientific Society of Mechanical Engineering

    Professor Jozsef Karger-Kocsis

  155. Polyurea Resins with In situ Produced Silicate Filler from Water Glass: Static and Dynamic Mechanical Properties

    Article • Journal of Macromolecular Science Part B, February 2007, Taylor & Francis

    Professor Jozsef Karger-Kocsis

  156. Monitoring of cure-induced strain of an epoxy resin by fiber Bragg grating sensor

    Article • Journal of Applied Polymer Science, January 2007, Wiley

    Professor Jozsef Karger-Kocsis

  157. Fracture and failure behavior of fabric-reinforced all-poly(propylene) composite (Curv®)

    Article • Polymers for Advanced Technologies, January 2007, Wiley

    Professor Jozsef Karger-Kocsis

  158. Polystyrene–fluorohectorite nanocomposites prepared by melt mixing with and without latex precompounding: Structure and mechanical properties

    Article • Journal of Applied Polymer Science, January 2007, Wiley

    Professor Jozsef Karger-Kocsis

  159. Alumina-filled polystyrene micro- and nanocomposites prepared by melt mixing with and without latex precompounding: Structure and properties

    Article • Journal of Applied Polymer Science, January 2007, Wiley

    Professor Jozsef Karger-Kocsis

  160. Dielectric properties of layered silicate-reinforced natural and polyurethane rubber nanocomposites

    Article • Journal of Applied Polymer Science, January 2007, Wiley

    Professor Jozsef Karger-Kocsis

  161. Creep Behavior of Polystyrene/Fluorohectorite Micro- and Nanocomposites

    Article • Macromolecular Rapid Communications, December 2006, Wiley

    Professor Jozsef Karger-Kocsis

  162. Determination of J–R curves of thermoplastic starch composites containing crossed quasi-unidirectional flax fiber reinforcement

    Article • Composites Science and Technology, December 2006, Elsevier

    Professor Jozsef Karger-Kocsis

  163. Preamble

    Article • Composites Science and Technology, December 2006, Elsevier

    Professor Jozsef Karger-Kocsis

  164. Multiwall carbon nanotube modified vinylester and vinylester – based hybrid resins

    Article • Composites Part A Applied Science and Manufacturing, September 2006, Elsevier

    Professor Jozsef Karger-Kocsis, Professor Zoltan Konya

  165. Thermal and crystallisation behaviours of blends of polyamide 12 with styrene–ethylene/butylene–styrene rubbers

    Article • Polymer, August 2006, Elsevier

    Professor Jozsef Karger-Kocsis, Selvin Thomas

  166. A modulated dsc study on the in situ polymerization of cyclic butylene terephthalate oligomers

    Article • Journal of Thermal Analysis and Calorimetry, May 2006, Springer Science + Business Media

    Professor Jozsef Karger-Kocsis

  167. Morphology and mechanical properties of polyamide 12/polypropylene blends in presence and absence of reactive compatibiliser

    Article • Polymer, May 2006, Elsevier

    Professor Jozsef Karger-Kocsis

  168. Biodegradable jute cloth reinforced thermoplastic copolyester composites: fracture and failure behaviour

    Article • Plastics Rubber and Composites Macromolecular Engineering, March 2006, Taylor & Francis

    Professor Jozsef Karger-Kocsis, Prof. Norma Esther Marcovich

  169. “Nanoreinforcement” of Thermoplastic Elastomers

    Article • February 2006, Wiley

    Professor Jozsef Karger-Kocsis

  170. Polymer Blends Containing Thermoplastic Elastomers of the Condensation and Addition Types

    Article • February 2006, Wiley

    Professor Jozsef Karger-Kocsis

  171. Nanostructure in Hybrid Thermosets with Interpenetrating Networks and its Effect on Properties

    Article • Journal of Nanoscience and Nanotechnology, February 2006, American Scientific Publishers

    Professor Jozsef Karger-Kocsis

  172. Homage to Béla Pukánszky

    Article • Composite Interfaces, January 2006, Taylor & Francis

    Professor Jozsef Karger-Kocsis

  173. Development and characterization of self-reinforced poly(propylene) composites: carded mat reinforcement

    Article • Polymers for Advanced Technologies, January 2006, Wiley

    Professor Jozsef Karger-Kocsis

  174. On the in-situ polymerization of cyclic butylene terephthalate oligomers: DSC and rheological studies

    Article • Polymer Engineering & Science, January 2006, Wiley

    Professor Jozsef Karger-Kocsis

  175. Morphology and fracture properties of modified bisphenol A and novolac type vinyl ester resins

    Article • Journal of Applied Polymer Science, January 2006, Wiley

    Professor Jozsef Karger-Kocsis

  176. Polyurea/vinylester hybrid thermoset resins within situ produced silicate filler: Preparation and static mechanical properties

    Article • Journal of Applied Polymer Science, January 2006, Wiley

    Professor Jozsef Karger-Kocsis

  177. Physical properties of natural rubber/organoclay nanocomposites compatibilized with epoxidized natural rubber

    Article • Journal of Applied Polymer Science, January 2006, Wiley

    Professor Jozsef Karger-Kocsis

  178. Simultaneous Interpenetrating Network Structured Vinylester/Epoxy Hybrids and Their Use in Composites

    Article • September 2005, Taylor & Francis

    Professor Jozsef Karger-Kocsis

  179. In-plane and Out-of-plane Fracture Toughness of Physically Aged Polyesters as Assessed by the Essential Work of Fracture (EWF) Method

    Article • International Journal of Fracture, September 2005, Springer Science + Business Media

    Professor Jozsef Karger-Kocsis, Dr Ferenc Ronkay

  180. Fracture and failure behavior of basalt fiber mat-reinforced vinylester/epoxy hybrid resins as a function of resin composition and fiber surface treatment

    Article • Journal of Materials Science, August 2005, Springer Science + Business Media

    Professor Jozsef Karger-Kocsis

  181. Controlling the Deintercalation in Hydrogenated Nitrile Rubber (HNBR)/Organo-Montmorillonite Nanocomposites by Curing with Peroxide

    Article • Macromolecular Rapid Communications, June 2005, Wiley

    Professor Jozsef Karger-Kocsis

  182. Compatibilizer Effect of Grafted Glycidyl Methacrylate on EPDM/Organoclay Nanocomposites

    Article • April 2005, CrossRef Test Account

    Professor Jozsef Karger-Kocsis

  183. Effects of primary and quaternary amine intercalants on the organoclay dispersion in a sulfur-cured EPDM rubber

    Article • Polymer, April 2005, Elsevier

    Professor Jozsef Karger-Kocsis

  184. Compatibilizer Effect of Grafted Glycidyl Methacrylate on EPDM/Organoclay Nanocomposites

    Article • Materials Science Forum, April 2005, Trans Tech Publications

    Professor Jozsef Karger-Kocsis

  185. Effect of maleic anhydride-grafted ethylene–propylene rubber on the mechanical, rheological and morphological properties of organoclay reinforced polyamide 6/polypropylene nanocomposites

    Article • European Polymer Journal, April 2005, Elsevier

    Professor Jozsef Karger-Kocsis

  186. Morphological and Rheological Properties of Polyamide 6/Poly(propylene)/Organoclay Nanocomposites

    Article • Macromolecular Materials and Engineering, February 2005, Wiley

    Professor Jozsef Karger-Kocsis

  187. Textile Fabric-Reinforced Thermoplastic Polyester Composites: Sections 1-3

    Article • January 2005, Wiley

    Professor Jozsef Karger-Kocsis

  188. Textile Fabric-Reinforced Thermoplastic Polyester Composites: Sections 4-5

    Article • January 2005, Wiley

    Professor Jozsef Karger-Kocsis

  189. Fracture and Fatigue Behavior of Amorphous (Co)Polyesters as a Function of Molecular and Network Variables: Sections 1-4.1.1

    Article • January 2005, Wiley

    Professor Jozsef Karger-Kocsis

  190. Recycling Options for Post-Consumer PET and PET-Containing Wastes by Melt Blending: Sections 1-2

    Article • January 2005, Wiley

    Professor Jozsef Karger-Kocsis

  191. Effect of reactive compatibilisation on the phase morphology and tensile properties of PA12/PP blends

    Article • Journal of Applied Polymer Science, January 2005, Wiley

    Professor Jozsef Karger-Kocsis

  192. Atomic force microscopy study on blend morphology and clay dispersion in polyamide-6/polypropylene/organoclay systems

    Article • Journal of Polymer Science Part B Polymer Physics, January 2005, Wiley

    Professor Jozsef Karger-Kocsis

  193. Morphology and mechanical properties of polyamide 12 blends with styrene/ethylene-butylene/styrene rubbers with and without maleation

    Article • Journal of Applied Polymer Science, January 2005, Wiley

    Professor Jozsef Karger-Kocsis

  194. Nanocomposite Formation in Hydrogenated Nitrile Rubber (HNBR)/Organo-Montmorillonite as a Function of the Intercalant Type

    Article • Macromolecular Materials and Engineering, December 2004, Wiley

    Professor Jozsef Karger-Kocsis

  195. Effects of epoxidized natural rubber as a compatibilizer in melt compounded natural rubber–organoclay nanocomposites

    Article • European Polymer Journal, November 2004, Elsevier

    Professor Jozsef Karger-Kocsis

  196. Stress oscillation-induced modulated phase transformation and yielding in syndiotactic polypropylene

    Article • Chemical Physics Letters, November 2004, Elsevier

    Professor Jozsef Karger-Kocsis

  197. Toughness Behaviour of Vinylester/Epoxy Thermosets with Interpenetrating Network Structure

    Article • Macromolecular Symposia, October 2004, Wiley

    Professor Jozsef Karger-Kocsis

  198. Effects of molecular structure on the essential work of fracture of amorphous copolyesters at various deformation rates

    Article • Polymer, August 2004, Elsevier

    Professor Jozsef Karger-Kocsis

  199. Micromechanical Mechanisms for Toughness Enhancement inβ-Modified Polypropylene

    Article • Macromolecular Symposia, August 2004, Wiley

    Professor Jozsef Karger-Kocsis

  200. Effect of fibre surface treatment on the mechanical response of ceramic fibre mat-reinforced interpenetrating vinylester/epoxy resins

    Article • Composites Science and Technology, August 2004, Elsevier

    Professor Jozsef Karger-Kocsis

  201. Characteristics of ethylene propylene diene monomer rubber/organoclay nanocomposites resulting from different processing conditions and formulations

    Article • Polymer International, June 2004, Wiley

    Professor Jozsef Karger-Kocsis

  202. Tearing resistance of some co-polyester sheets

    Article • Acta Materialia, June 2004, Elsevier

    Professor Jozsef Karger-Kocsis

  203. Synthesis of reactive hyperbranched and star-like polyethers and their use for toughening of vinylester–urethane hybrid resins

    Article • Polymer, February 2004, Elsevier

    Professor Jozsef Karger-Kocsis

  204. Effect of UV aging on the tensile and fracture mechanical response of syndiotactic polypropylenes of various crystallinity

    Article • Journal of Applied Polymer Science, January 2004, Wiley

    Professor Jozsef Karger-Kocsis

  205. Thermoset rubber/layered silicate nanocomposites. Status and future trends

    Article • Polymer Engineering & Science, January 2004, Wiley

    Professor Jozsef Karger-Kocsis

  206. Moisture Absorption and Hygrothermal Aging of Organo-montmorillonite Reinforced Polyamide 6/Polypropylene Nanocomposites

    Article • January 2004, Elsevier

    Professor Jozsef Karger-Kocsis

  207. In‐Plane Fracture Toughness of PET Fiber‐Reinforced Paper as a Function of UV‐Irradiation

    Article • Journal of Macromolecular Science Part B, January 2004, Taylor & Francis

    Professor Jozsef Karger-Kocsis

  208. Effects of Molecular Structure on the Essential Work of Fracture of Amorphous Copolyester at Various Deformation Rates

    Article • January 2004, Elsevier

    Professor Jozsef Karger-Kocsis

  209. Viscoelastic Behaviour, Thermal Properties and Morphology for New Composites from Recycled HDPE, EPDM, Ground Tyre Rubber (GTR) and Bitumen

    Article • January 2004, Elsevier

    Professor Jozsef Karger-Kocsis, Professor Alexander M Fainleib

  210. Morphology and mechanical properties of layered silicate reinforced natural and polyurethane rubber blends produced by latex compounding

    Article • Journal of Applied Polymer Science, January 2004, Wiley

    Professor Jozsef Karger-Kocsis

  211. Kinetics of water absorption and hygrothermal aging rubber toughened poly(butylene terephthalate) with and without short glass fiber reinforcement

    Article • Journal of Applied Polymer Science, January 2004, Wiley

    Professor Jozsef Karger-Kocsis

  212. On the potential of organoclay with respect to conventional fillers (carbon black, silica) for epoxidized natural rubber compatibilized natural rubber vulcanizates

    Article • Journal of Applied Polymer Science, January 2004, Wiley

    Professor Jozsef Karger-Kocsis

  213. Influence of the type of epoxy hardener on the structure and properties of interpenetrated vinyl ester/epoxy resins

    Article • Journal of Polymer Science Part A Polymer Chemistry, January 2004, Wiley

    Professor Jozsef Karger-Kocsis

  214. Thermoplastic elastomers based on recycled high-density polyethylene, ethylene-propylene-diene monomer rubber, and ground tire rubber

    Article • Journal of Applied Polymer Science, January 2004, Wiley

    Professor Jozsef Karger-Kocsis

  215. Cure Characteristics and Mechanical Properties of Natural Rubber/Organoclay Nanocomposites

    Article • Jurnal Teknologi (Sciences & Engineering), December 2003, Penerbit UTM Press

    Professor Jozsef Karger-Kocsis

  216. Polyamide 6/Polypropylene/Organoclay Nanocomposites: Influence of Organoclay and Compatibiliser on the Morhological and Tensile Properties

    Article • Jurnal Teknologi (Sciences & Engineering), December 2003, Penerbit UTM Press

    Professor Jozsef Karger-Kocsis

  217. Interpenetrating vinylester/epoxy resins modified with organophilic layered silicates

    Article • Composites Science and Technology, November 2003, Elsevier

    Professor Jozsef Karger-Kocsis

  218. Compatibilizing effect of maleated polypropylene on the mechanical properties and morphology of injection molded polyamide 6/polypropylene/organoclay nanocomposites

    Article • Polymer, November 2003, Elsevier

    Professor Jozsef Karger-Kocsis

  219. Tensile fracture and failure behavior of technical flax fibers

    Article • Journal of Applied Polymer Science, October 2003, Wiley

    Professor Jozsef Karger-Kocsis

  220. Impact modification of PA-6 and PBT by epoxy-functionalized rubbers

    Article • Macromolecular Symposia, October 2003, Wiley

    Professor Jozsef Karger-Kocsis

  221. Tensile Fracture and Failure Behavior of Thermoplastic Starch with Unidirectional and Cross-Ply Flax Fiber Reinforcements

    Article • Macromolecular Materials and Engineering, September 2003, Wiley

    Professor Jozsef Karger-Kocsis

  222. Plane stress fracture toughness of physically aged plasticized PETG as assessed by the essential work of fracture (EWF) method

    Article • Polymer, September 2003, Elsevier

    Professor Jozsef Karger-Kocsis

  223. Artificial neural network predictions on erosive wear of polymers

    Article • Wear, August 2003, Elsevier

    Professor Jozsef Karger-Kocsis, Professor Klaus Friedrich

  224. Natural rubber-based nanocomposites by latex compounding with layered silicates

    Article • Polymer, August 2003, Elsevier

    Professor Jozsef Karger-Kocsis

  225. Melt compounded epoxidized natural rubber/layered silicate nanocomposites: structure-properties relationships

    Article • Polymer, June 2003, Elsevier

    Professor Jozsef Karger-Kocsis

  226. Photoinitiated grafting of glycidyl methacrylate and methacrylic acid on ground tire rubber

    Article • Journal of Applied Polymer Science, May 2003, Wiley

    Professor Jozsef Karger-Kocsis

  227. Processes and Influencing Parameters of the Solid Particle Erosion of Polymers and Their Composites

    Article • ChemInform, March 2003, Wiley

    Professor Jozsef Karger-Kocsis

  228. Toughness response of vinylester/epoxy-based thermosets of interpenetrating network structure as a function of the epoxy resin formulation: Effects of the cyclohexylene linkage

    Article • Journal of Applied Polymer Science, March 2003, Wiley

    Professor Jozsef Karger-Kocsis

  229. Mode I fracture resistance of glass fiber mat-reinforced polypropylene composites at various degree of consolidation

    Article • Composites Part A Applied Science and Manufacturing, March 2003, Elsevier

    Professor Jozsef Karger-Kocsis

  230. Melt-compounded natural rubber nanocomposites with pristine and organophilic layered silicates of natural and synthetic origin

    Article • Journal of Applied Polymer Science, January 2003, Wiley

    Professor Jozsef Karger-Kocsis

  231. Sulphur Vulcanisation of Styrene Butadiene Rubber Using New Binary Accelerator Systems

    Article • Journal of Elastomers & Plastics, January 2003, SAGE Publications

    Professor Jozsef Karger-Kocsis

  232. Effect of hygrothermal aging on the essential work of fracture response of amorphous poly(ethylene terephthalate) sheets

    Article • Polymer Degradation and Stability, January 2003, Elsevier

    Professor Jozsef Karger-Kocsis

  233. The effect of organoclay on the mechanical properties and morphology of injection-molded polyamide 6/polypropylene nanocomposites

    Article • Journal of Applied Polymer Science, January 2003, Wiley

    Professor Jozsef Karger-Kocsis

  234. Effect of 1-phenyl-2,4-dithiobiuret as secondary accelerator on cure characteristics and vulcanisate properties of natural rubber-styrene/butadiene rubber blends

    Article • Plastics Rubber and Composites Macromolecular Engineering, January 2003, Taylor & Francis

    Professor Jozsef Karger-Kocsis

  235. Curing and mechanical behavior of carboxylated NBR containing hygrothermally decomposed polyurethane

    Article • European Polymer Journal, November 2002, Elsevier

    Professor Jozsef Karger-Kocsis

  236. Fracture toughness of α- and β-phase polypropylene homopolymers and random- and block-copolymers

    Article • Polymer, November 2002, Elsevier

    Professor Jozsef Karger-Kocsis

  237. Solid Particle Erosion of Unidirectional GF Reinforced EP Composites with Different Fiber/Matrix Adhesion

    Article • Journal of Reinforced Plastics and Composites, October 2002, SAGE Publications

    Professor Jozsef Karger-Kocsis

  238. Cold Drawing-Induced Mesophase in Amorphous Poly(ethylene naphthalate) Revealed by X-ray Microdiffraction

    Article • Macromolecules, September 2002, American Chemical Society (ACS)

    Professor Jozsef Karger-Kocsis

  239. Toughening of vinylester–urethane hybrid resins by functional liquid nitrile rubbers and hyperbranched polymers

    Article • Polymer, August 2002, Elsevier

    Professor Jozsef Karger-Kocsis

  240. Plane-stress fracture behavior of syndiotactic polypropylenes of various crystallinity as assessed by the essential work of fracture method

    Article • Polymer Engineering & Science, July 2002, Wiley

    Professor Jozsef Karger-Kocsis

  241. Prediction of the Residual Tensile Strength after Solid Particle Erosion of UD-GF/PP Composites

    Article • Journal of Composite Materials, July 2002, SAGE Publications

    Professor Jozsef Karger-Kocsis

  242. Toughening of vinylester–urethane hybrid resins through functionalized polymers

    Article • Journal of Applied Polymer Science, April 2002, Wiley

    Professor Jozsef Karger-Kocsis

  243. Fracture and Fatigue Behavior of Amorphous (Co)polyesters as a Function of Molecular and Network Variables: Sections 4.1.2–6

    Article • April 2002, Wiley

    Professor Jozsef Karger-Kocsis

  244. Recycling Options for Post‐Consumer PET and PET‐Containing Wastes by Melt Blending: Sections 3–5

    Article • April 2002, Wiley

    Professor Jozsef Karger-Kocsis

  245. Effects of hygrothermally decomposed polyurethane on the curing and mechanical properties of carbon black-filled epoxidized natural rubber vulcanizates

    Article • Journal of Applied Polymer Science, April 2002, Wiley

    Professor Jozsef Karger-Kocsis

  246. Impact Fracture and Failure Behavior of in-situ Polymerized, Ethylene/Butyl Acrylate Rubber Toughened Polyamide-12

    Article • Macromolecular Materials and Engineering, April 2002, Wiley

    Professor Jozsef Karger-Kocsis

  247. Thermoplastic dynamic vulcanisates containing LDPE, rubber, and thermochemically reclaimed ground tyre rubber

    Article • Plastics Rubber and Composites Macromolecular Engineering, March 2002, Taylor & Francis

    Professor Jozsef Karger-Kocsis

  248. Fracture behavior of rubber-modified injection molded poly(butylene terephthalate) with and without short glass fiber reinforcement

    Article • Journal of Applied Polymer Science, February 2002, Wiley

    Professor Jozsef Karger-Kocsis

  249. Toughening of vinylester-urethane hybrid resins through functionalized polymers

    Article • Journal of Applied Polymer Science, February 2002, Wiley

    Professor Jozsef Karger-Kocsis

  250. On the curing of a vinylester–urethane hybrid resin

    Article • Polymer, February 2002, Elsevier

    Professor Jozsef Karger-Kocsis

  251. INSTRUMENTED FALLING WEIGHT IMPACT OF COINJECTION-MOLDED MULTIPOLYPROPYLENE SANDWICH PLAQUES CONTAINING β-PHASE POLYPROPYLENE CORE

    Article • Journal of Macromolecular Science Part B, January 2002, Taylor & Francis

    Professor Jozsef Karger-Kocsis

  252. Effects of fibre content and relative fibre-orientation on the solid particle erosion of GF/PP composites

    Article • Wear, January 2002, Elsevier

    Professor Jozsef Karger-Kocsis

  253. LDPE-based thermoplastic elastomers containing ground tire rubber with and without dynamic curing

    Article • Polymer Degradation and Stability, January 2002, Elsevier

    Professor Jozsef Karger-Kocsis

  254. Prediction of the residual tensile strengths of carbon-fiber/epoxy laminates with and without interleaves after solid particle erosion

    Article • Composites Science and Technology, January 2002, Elsevier

    Professor Jozsef Karger-Kocsis

  255. Effects of surface treatment and weave structure on interlaminar fracture behaviour of plain glass woven fabric composites: Part II. Report of the 2nd round robin test results

    Article • Composite Interfaces, January 2002, Taylor & Francis

    Professor Jozsef Karger-Kocsis, Chair Professor Jang Kyo Kim

  256. Comparative study of the fracture behavior of flow-molded GMT-PP with random and chopped-fiber mats

    Article • Composites Science and Technology, December 2001, Elsevier

    Professor Jozsef Karger-Kocsis

  257. Effects of Cold Drawing and Annealing on the ADSC Response and Microhardness of Amorphous and Crystalline Poly(ethylene naphthalate)

    Article • International Journal of Polymeric Materials, October 2001, Taylor & Francis

    Professor Jozsef Karger-Kocsis

  258. Comparison of the Instrumented Falling Weight Impact Response of Polypropylene Composites Reinforced by Continuous and Discontinuous Fiber Mats

    Article • Journal of Reinforced Plastics and Composites, August 2001, SAGE Publications

    Professor Jozsef Karger-Kocsis

  259. Comparison of the Instrumented Falling Weight Impact Response of Polypropylene Composites Reinforced by Continuous and Discontinuous Fiber Mats

    Article • Journal of Reinforced Plastics and Composites, August 2001, SAGE Publications

    Professor Jozsef Karger-Kocsis

  260. On the plane-strain essential work of fracture of polymer sheets

    Article • Polymer Bulletin, July 2001, Springer Science + Business Media

    Professor Jozsef Karger-Kocsis

  261. Application of hygrothermally decomposed polyurethane in rubber recipes Part 2–Influence of hygrothermally decomposed polyester–urethane on cure characteristics and viscoelastic behaviour of styrene/butadiene rubber

    Article • Plastics Rubber and Composites Macromolecular Engineering, July 2001, Taylor & Francis

    Professor Jozsef Karger-Kocsis

  262. Fracture and failure behavior of partially consolidated ciscontinuous glass fiber mat-reinforced polypropylene composites(Azdel SuperLite®)

    Article • Macromolecular Symposia, June 2001, Wiley

    Professor Jozsef Karger-Kocsis

  263. STICK-SLIP TYPE CRACK GROWTH DURING INSTRUMENTED HIGH-SPEED IMPACT OF HDPE AND HDPE/SELAR® DISCONTINUOUS LAMINAR MICROLAYER COMPOSITES

    Article • Journal of Macromolecular Science Part B, May 2001, Taylor & Francis

    Professor Jozsef Karger-Kocsis

  264. Role of film formers in glass fibre reinforced polypropylene — new insights and relation to mechanical properties

    Article • Composites Part A Applied Science and Manufacturing, May 2001, Elsevier

    Professor Jozsef Karger-Kocsis

  265. Rheological and Thermodynamical Behavior of Styrene/Butadiene Rubber-Organoclay Nanocomposites

    Article • Macromolecular Materials and Engineering, April 2001, Wiley

    Professor Jozsef Karger-Kocsis

  266. Rheological and Thermodynamical Behavior of Styrene/Butadiene Rubber-Organoclay Nanocomposites

    Article • Macromolecular Materials and Engineering, April 2001, Wiley

    Professor Jozsef Karger-Kocsis

  267. 13C- und 1H-NMR Analyse eines Nitrilkautschuks mit und ohne Glycidylmethacrylat Pfropfung

    Article • European Polymer Journal, March 2001, Elsevier

    Professor Jozsef Karger-Kocsis

  268. Thermoplastic elastomers based on compatibilized poly(ethylene terephthalate) blends: effect of rubber type and dynamic curing

    Article • Polymer, February 2001, Elsevier

    Professor Jozsef Karger-Kocsis

  269. Fracture toughness assessment of poly(ethylene terephthalate) blends with glycidyl methacrylate modified polyolefin elastomer using essential work of fracture method

    Article • Journal of Applied Polymer Science, January 2001, Wiley

    Professor Jozsef Karger-Kocsis

  270. Unsaturated polyester resin modified with poly(organosiloxanes). II. Acoustic emission study on glass-fiber-reinforced resin

    Article • Journal of Applied Polymer Science, January 2001, Wiley

    Professor Jozsef Karger-Kocsis

  271. Interfacial shear strength and failure modes in sPP/CF and iPP/CF microcomposites by fragmentation

    Article • Polymer, January 2001, Elsevier

    Professor Jozsef Karger-Kocsis

  272. Dependence of solid particle erosion on the cross-link density in an epoxy resin modified by hygrothermally decomposed polyurethane

    Article • Wear, January 2001, Elsevier

    Professor Jozsef Karger-Kocsis

  273. Effect of micromorphologic features on the interfacial strength of iPP/Kevlar fiber microcomposites

    Article • Polymer, January 2001, Elsevier

    Professor Jozsef Karger-Kocsis

  274. Instrumented Perforation Impact Response of Polypropylene Composites with Hybrid Reinforcement Flax/Glass and Flax/Cellulose Fibers

    Article • Journal of Thermoplastic Composite Materials, November 2000, SAGE Publications

    Professor Jozsef Karger-Kocsis

  275. Use of hygrothermal decomposed polyester–urethane waste for the impact modification of epoxy resins

    Article • Journal of Applied Polymer Science, October 2000, Wiley

    Professor Jozsef Karger-Kocsis

  276. Swirl mat- and long discontinuous fiber mat-reinforced polypropylene composites?status and future trends

    Article • Polymer Composites, August 2000, Wiley

    Professor Jozsef Karger-Kocsis

  277. Strain rate dependence of the work of fracture response of an amorphous poly(ethylene-naphthalate) (PEN) film

    Article • Polymer Engineering & Science, August 2000, Wiley

    Professor Jozsef Karger-Kocsis

  278. Melt grafting of maleic anhydride onto an ethylene–propylene–diene terpolymer (EPDM)

    Article • European Polymer Journal, July 2000, Elsevier

    Professor Jozsef Karger-Kocsis

  279. Molecular dependence of the essential and non-essential work of fracture of amorphous films of poly(ethylene-2,6-naphthalate) (PEN)

    Article • Polymer, July 2000, Elsevier

    Professor Jozsef Karger-Kocsis

  280. Short glass fibre reinforcedpoly(butylene terephthalate) Part 1 –Microstructural characterisation and kinetics of moisture absorption

    Article • Plastics Rubber and Composites Macromolecular Engineering, June 2000, Taylor & Francis

    Professor Jozsef Karger-Kocsis

  281. Short glass fibre reinforcedpoly(butylene terephthalate) Part 2 –Effect of hygrothermal aging onmechanical properties

    Article • Plastics Rubber and Composites Macromolecular Engineering, June 2000, Taylor & Francis

    Professor Jozsef Karger-Kocsis

  282. Hygrothermal aging and fracture behavior of short-glass-fiber-reinforced rubber-toughened poly(butylene terephthalate) composites

    Article • Composites Science and Technology, May 2000, Elsevier

    Professor Jozsef Karger-Kocsis

  283. Fracture and Fatigue Behaviour of Semicrystalline Polymers as a Function of Microstructural and Molecular Parameters

    Article • January 2000, Springer Science + Business Media

    Professor Jozsef Karger-Kocsis

  284. Use of hygrothermal decomposed polyester-urethane waste for the impact modification of epoxy resins

    Article • Journal of Applied Polymer Science, January 2000, Wiley

    Professor Jozsef Karger-Kocsis

  285. Fracture toughness assessment of poly(ethylene terephthalate) blends with glycidyl methacrylate modified polyolefin elastomer using essential work of fracture method

    Article • Journal of Applied Polymer Science, January 2000, Wiley

    Professor Jozsef Karger-Kocsis

  286. Essential work of fracture: Simulating the toughness response of deeply double-edge notched specimens

    Article • Polymer Bulletin, December 1999, Springer Science + Business Media

    Professor Jozsef Karger-Kocsis

  287. Determination methods of the grafting yield in glycidyl methacrylate-grafted ethylene/propylene/diene rubber (EPDM-g-GMA): Correlation between FTIR and1H-NMR analysis

    Article • Journal of Applied Polymer Science, December 1999, Wiley

    Professor Jozsef Karger-Kocsis

  288. Hygrothermal aging and fracture behavior of styrene-acrylonitrile/acrylate based core–shell rubber toughened poly(butylene terephthalate)

    Article • Journal of Applied Polymer Science, December 1999, Wiley

    Professor Jozsef Karger-Kocsis

  289. Hygrothermal aging and fracture behavior of styrene-acrylonitrile/acrylate based core-shell rubber toughened poly(butylene terephthalate)

    Article • Journal of Applied Polymer Science, December 1999, Wiley

    Professor Jozsef Karger-Kocsis

  290. Study on surface and mechanical fiber characteristics and their effect on the adhesion properties to a polycarbonate matrix tuned by anodic carbon fiber oxidation

    Article • Composites Part A Applied Science and Manufacturing, December 1999, Elsevier

    Professor Jozsef Karger-Kocsis

  291. Promising approach to functionalisation of ground tyre rubber -photochemically induced grafting: Short Communication

    Article • Plastics Rubber and Composites Macromolecular Engineering, October 1999, Taylor & Francis

    Professor Jozsef Karger-Kocsis

  292. Effects of molecular weight on the perforation impact behavior of injection-molded plaques of α-and β-phase isotactic polypropylenes

    Article • Journal of Macromolecular Science Part B, September 1999, Taylor & Francis

    Professor Jozsef Karger-Kocsis

  293. Toward understanding the morphology-related crack initiation and propagation behavior in polypropylene systems as assessed by the essential work of fracture approach

    Article • Journal of Macromolecular Science Part B, September 1999, Taylor & Francis

    Professor Jozsef Karger-Kocsis

  294. Instrumented tensile and falling weight impact response of injection-molded α- and β-phase polypropylene homopolymers with various melt flow indices

    Article • Journal of Applied Polymer Science, August 1999, Wiley

    Professor Jozsef Karger-Kocsis

  295. Instrumented tensile and falling weight impact response of injection-molded ?- and ?-phase polypropylene homopolymers with various melt flow indices

    Article • Journal of Applied Polymer Science, August 1999, Wiley

    Professor Jozsef Karger-Kocsis

  296. Thermoelastic behavior of carbon fiber/polycarbonate model composites

    Article • Polymer Engineering & Science, August 1999, Wiley

    Professor Jozsef Karger-Kocsis

  297. Dependence of the fracture and fatigue performance of polyolefins and related blends and composites on microstructural and molecular characteristics

    Article • Macromolecular Symposia, August 1999, Wiley

    Professor Jozsef Karger-Kocsis

  298. Effects of injection molding-induced morphology on the work of fracture parameters in rubber-toughened polypropylenes

    Article • Polymer Engineering & Science, August 1999, Wiley

    Professor Jozsef Karger-Kocsis

  299. Stress oscillation in amorphous copolyesters due to tensile impact

    Article • Polymer Engineering & Science, August 1999, Wiley

    Professor Jozsef Karger-Kocsis

  300. Solid particle erosion of electrically insulating silicon and EPDM rubber compounds

    Article • Polymer Bulletin, July 1999, Springer Science + Business Media

    Professor Jozsef Karger-Kocsis

  301. The role of metastability in the micromorphologic features of sheared isotactic polypropylene melts

    Article • Polymer, July 1999, Elsevier

    Professor Jozsef Karger-Kocsis

  302. Essential work of fracture: application for polymers showing ductile-to-brittle transition during fracture

    Article • Polymer Bulletin, May 1999, Springer Science + Business Media

    Professor Jozsef Karger-Kocsis

  303. Amorphous or atactic polypropylene

    Article • January 1999, Springer Science + Business Media

    Professor Jozsef Karger-Kocsis

  304. Thermoplastic dynamic vulcanizates

    Article • January 1999, Springer Science + Business Media

    Professor Jozsef Karger-Kocsis

  305. Glass mat reinforced thermoplastic polypropylene

    Article • January 1999, Springer Science + Business Media

    Professor Jozsef Karger-Kocsis

  306. Fatigue performance of polypropylene and related composites

    Article • January 1999, Springer Science + Business Media

    Professor Jozsef Karger-Kocsis

  307. Polypropylene

    Article • January 1999, Springer Science + Business Media

    Professor Jozsef Karger-Kocsis

  308. Interfacial morphology and its effects in polypropylene composites

    Article • January 1999, Springer Science + Business Media

    Professor Jozsef Karger-Kocsis

  309. Structural investigation of the phase transformation in the plastic zone of a β-phase isotactic polypropylene by synchrotron radiation microdiffraction

    Article • Polymer, January 1999, Elsevier

    Professor Jozsef Karger-Kocsis

  310. Mechanical performance of stretched knitted fabric glass fibre reinforced poly(ethylene terephthalate) composites produced from commingled yarn

    Article • Plastics Rubber and Composites Macromolecular Engineering, January 1999, Taylor & Francis

    Professor Jozsef Karger-Kocsis

  311. Effect of microcrystallinity on the mechanical performance of polycarbonate

    Article • Journal of Macromolecular Science Part B, January 1999, Taylor & Francis

    Professor Jozsef Karger-Kocsis

  312. Toughness assessment of elastomeric polypropylene (ELPP) by the essential work of the fracture method

    Article • Journal of Applied Polymer Science, October 1998, Wiley

    Professor Jozsef Karger-Kocsis

  313. Micromorphologic feature of the crystallization of isotactic polypropylene after melt-shearing

    Article • Polymer Bulletin, October 1998, Springer Science + Business Media

    Professor Jozsef Karger-Kocsis

  314. Transcrystallization in syndiotactic polypropylene induced by high-modulus carbon fibers

    Article • Polymer Bulletin, August 1998, Springer Science + Business Media

    Professor Jozsef Karger-Kocsis

  315. Deformation rate dependence of the essential and non-essential work of fracture parameters in an amorphous copolyester

    Article • Polymer, August 1998, Elsevier

    Professor Jozsef Karger-Kocsis

  316. Influence of weathering on unreinforced and short glass fibre reinforced thermoplastic polyester

    Article • Journal of Materials Science, May 1998, Springer Science + Business Media

    Professor Jozsef Karger-Kocsis, Professor Klaus Friedrich

  317. Fracture behaviour of polypropylene/glass bead elastomer composites by using the essential work-of-fracture method

    Article • Journal of Materials Science, May 1998, Springer Science + Business Media

    Professor Jozsef Karger-Kocsis

  318. Effects of gasoline absorption on the tensile impact response of HDPE/Selar? laminar microlayer composites

    Article • Journal of Applied Polymer Science, April 1998, Wiley

    Professor Jozsef Karger-Kocsis

  319. A modulated dsc study on the strain-induced βα-transformation in a β-form isotactic polypropylene

    Article • Journal of Thermal Analysis and Calorimetry, January 1998, Springer Science + Business Media

    Professor Jozsef Karger-Kocsis

  320. Effects of interphase on the fracture and failure behavior of knitted fabric reinforced composites produced from commingled GF/PP yarn

    Article • Composites Part A Applied Science and Manufacturing, January 1998, Elsevier

    Professor Jozsef Karger-Kocsis

  321. Relationships between molecular and plane-stress essential work of fracture parameters in amorphous copolyesters

    Article • Polymer Bulletin, October 1997, Springer Science + Business Media

    Professor Jozsef Karger-Kocsis

  322. Thickness dependence of work of fracture parameters of an amorphous copolyester

    Article • Polymer, September 1997, Elsevier

    Professor Jozsef Karger-Kocsis

  323. Interfacial effects on the dynamic mechanical behavior of weft-knitted glass fiber fabric-reinforced polypropylene composites produced of commingled yarns. Tensile and flexural response

    Article • Applied Composite Materials, July 1997, Springer Science + Business Media

    Professor Jozsef Karger-Kocsis

  324. Comparison of the fracture and failure behavior of injection-molded ?- and ?-polypropylene in high-speed three-point bending tests

    Article • Journal of Applied Polymer Science, June 1997, Wiley

    Professor Jozsef Karger-Kocsis

  325. Transverse Impact Behavior of Knitted Carbon-Fiber Fabric-Reinforced Thermoplastic Composite Sheets

    Article • Journal of Thermoplastic Composite Materials, March 1997, SAGE Publications

    Professor Jozsef Karger-Kocsis

  326. AFM imaging of interfacial morphologies in carbon-fiber reinforced isotactic polypropylene

    Article • Colloid & Polymer Science, February 1997, Springer Science + Business Media

    Professor Jozsef Karger-Kocsis

  327. Effects of hygrothermal aging on the fracture and failure behavior in short glass fiber-reinforced, toughened poly(butylene terephthalate) composites

    Article • Polymer Composites, December 1996, Wiley

    Professor Jozsef Karger-Kocsis

  328. Effects of ?-? transformation on the static and dynamic tensile behavior of isotactic polypropylene

    Article • Journal of Applied Polymer Science, October 1996, Wiley

    Professor Jozsef Karger-Kocsis

  329. For what kind of polymer is the toughness assessment by the essential work concept straightforward?

    Article • Polymer Bulletin, July 1996, Springer Science + Business Media

    Professor Jozsef Karger-Kocsis

  330. On the essential and non-essential work of fracture of biaxial-oriented filled PET film

    Article • Polymer, June 1996, Elsevier

    Professor Jozsef Karger-Kocsis

  331. Rules of supermolecular structure formation in sheared isotactic polypropylene melts

    Article • Journal of Polymer Science Part B Polymer Physics, March 1996, Wiley

    Professor Jozsef Karger-Kocsis

  332. Surface energetics of carbon fibers and its effects on the mechanical performance of CF/EP composites

    Article • Journal of Applied Polymer Science, January 1996, Wiley

    Professor Jozsef Karger-Kocsis

  333. Surface energetics of carbon fibers and its effects on the mechanical performance of CF/EP composites

    Article • Journal of Applied Polymer Science, January 1996, Wiley

    Professor Jozsef Karger-Kocsis

  334. Towards phase transformation toughened semicrystalline polymers

    Article • Polymer Bulletin, January 1996, Springer Science + Business Media

    Professor Jozsef Karger-Kocsis

  335. How does ?phase transformation toughening? work in semicrystalline polymers?

    Article • Polymer Engineering & Science, January 1996, Wiley

    Professor Jozsef Karger-Kocsis

  336. On the efficiency of interleaves in carbon fibre/epoxy composite laminates by the fractal approach

    Article • Journal of Materials Science Letters, January 1996, Springer Science + Business Media

    Professor Jozsef Karger-Kocsis

  337. On the Effects of Processing Conditions and Interphase of Modification on the Fiber/Matrix Load Transfer in Single Fiber Polypropylene Composites

    Article • The Journal of Adhesion, September 1995, Taylor & Francis

    Professor Jozsef Karger-Kocsis

  338. Deformation and Thermoelastic Behavior of Poly(aryl ether ketones)

    Article • Macromolecules, May 1995, American Chemical Society (ACS)

    Professor Jozsef Karger-Kocsis

  339. Polypropylene Structure, blends and composites

    Article • January 1995, Springer Science + Business Media

    Professor Jozsef Karger-Kocsis

  340. Polypropylene Structure, blends and composites

    Article • January 1995, Springer Science + Business Media

    Professor Jozsef Karger-Kocsis

  341. Polypropylene Structure, blends and Composites

    Article • January 1995, Springer Science + Business Media

    Professor Jozsef Karger-Kocsis

  342. Effects of Weathering on Fracture Toughness Jc and Micromechanical Properties of Unfilled and Short-Glass-Fiber-Filled Polyester, Xenoy.

    Article • TRANSACTIONS OF THE JAPAN SOCIETY OF MECHANICAL ENGINEERS Series A, January 1995, Japan Society of Mechanical Engineers

    Professor Jozsef Karger-Kocsis

  343. Interfacial morphologies in carbon fibre-reinforced polypropylene microcomposites

    Article • Polymer, January 1995, Elsevier

    Professor Jozsef Karger-Kocsis

  344. Thermodynamics of deformation of micro composites

    Article • Composite Interfaces, January 1995, Taylor & Francis

    Professor Jozsef Karger-Kocsis

  345. Microstructural aspects of fracture in polypropylene and in its filled, chopped fiber and fiber mat reinforced composites

    Article • January 1995, Springer Science + Business Media

    Professor Jozsef Karger-Kocsis

  346. Comparison of the fracture and failure behavior of polypropylene composites reinforced by long glass fibers and by glass mats

    Article • Composites Science and Technology, January 1995, Elsevier

    Professor Jozsef Karger-Kocsis

  347. Effects of fiber/matrix adhesion on off-axis mechanical response in carbon-fiber/epoxyresin composites

    Article • Composites Science and Technology, January 1995, Elsevier

    Professor Jozsef Karger-Kocsis, Professor Klaus Friedrich

  348. Low-energy charpy impact of interleaved CF/EP laminates

    Article • Applied Composite Materials, January 1995, Springer Science + Business Media

    Professor Jozsef Karger-Kocsis

  349. On the failure mode in dry and hygrothermally aged short fiber-reinforced injection-molded polyarylamide composites by acoustic emission

    Article • Applied Composite Materials, January 1995, Springer Science + Business Media

    Professor Jozsef Karger-Kocsis

  350. Fracture Mechanical Characterization of a Glass Fiber Mat-Reinforced Polypropylene by Instrumented Impact Bending

    Article • Journal of Reinforced Plastics and Composites, September 1994, SAGE Publications

    Professor Jozsef Karger-Kocsis

  351. Failure Mode and Damage Zone Development in a GMT-PP by Acoustic Emission and Thermography

    Article • Journal of Reinforced Plastics and Composites, September 1994, SAGE Publications

    Professor Jozsef Karger-Kocsis

  352. Dynamic Mechanical Analysis of Glass Mat-Reinforced Polypropylene (GMT-PP)

    Article • Journal of Thermoplastic Composite Materials, July 1994, SAGE Publications

    Professor Jozsef Karger-Kocsis

  353. Effects of the interface on the mechanical response of CF/EP microcomposites and macrocomposites

    Article • Composites, January 1994, Elsevier

    Professor Jozsef Karger-Kocsis

  354. Damage zone development and failure sequence in glass fibre mat-reinforced polypropylene under static loading conditions

    Article • Mechanics of Composite Materials, January 1994, Springer Science + Business Media

    Professor Jozsef Karger-Kocsis

  355. Effects of matrix microstructure on the interfacial strength in GF/PP examined by a single fiber pull-out technique

    Article • Mechanics of Composite Materials, January 1994, Springer Science + Business Media

    Professor Jozsef Karger-Kocsis

  356. Assessment of the damage zone in a glass mat-reinforced thermoplastic polypropylene (GMT-PP) by infrared thermography

    Article • Journal of Materials Science Letters, January 1994, Springer Science + Business Media

    Professor Jozsef Karger-Kocsis

  357. Effects of crystallinity and supermolecular formations on the interfacial shear strength and adhesion in GF/PP composites

    Article • Polymer Bulletin, December 1993, Springer Science + Business Media

    Professor Jozsef Karger-Kocsis

  358. Comparison of the failure mode in short and long glass fiber-reinforced injection-molded polypropylene composites by acoustic emission

    Article • Polymer Bulletin, October 1993, Springer Science + Business Media

    Professor Jozsef Karger-Kocsis

  359. Fracture mechanical characterization and damage zone development in glass fiber mat-reinforced thermoplastics

    Article • Polymer Bulletin, August 1993, Springer Science + Business Media

    Professor Jozsef Karger-Kocsis

  360. Preface

    Article • Journal of Polymer Engineering, March 1993, De Gruyter

    Professor Jozsef Karger-Kocsis

  361. Microstructure-Fracture Toughness Relationship of Short Fiber-Reinforced PP Homopolymer and PP/Elastomer Blends

    Article • Journal of Polymer Engineering, March 1993, De Gruyter

    Professor Jozsef Karger-Kocsis

  362. Direct evidence of row-nucleated cylindritic crystallization in glass fiber-reinforced polypropylene composites

    Article • Polymer Bulletin, January 1993, Springer Science + Business Media

    Professor Jozsef Karger-Kocsis

  363. The occurence of transcrystallization or row-nucleated cylindritic crystallization as a result of shearing in a glass-fiber-reinforced polypropylene

    Article • Composites Science and Technology, January 1993, Elsevier

    Professor Jozsef Karger-Kocsis

  364. Microstructure-related fracture toughness and fatigue crack growth behaviour in toughened, anhydride-cured epoxy resins

    Article • Composites Science and Technology, January 1993, Elsevier

    Professor Jozsef Karger-Kocsis, Professor Klaus Friedrich

  365. Instrumented impact fracture and related failure behavior in short- and long-glass-fiber-reinforced polypropylene

    Article • Composites Science and Technology, January 1993, Elsevier

    Professor Jozsef Karger-Kocsis

  366. Fracture behaviour of glass-fibre mat-reinforced structural nylon RIM composites studied by microscopic and acoustic emission techniques

    Article • Journal of Materials Science, January 1993, Springer Science + Business Media

    Professor Jozsef Karger-Kocsis

  367. On the sliding wear performance of polyethernitrile composites

    Article • Wear, October 1992, Elsevier

    Professor Jozsef Karger-Kocsis, Professor Klaus Friedrich

  368. Instrumented impact testing of a glass swirl mat-reinforced reaction injection-molded polyamide block copolymer (NBC)

    Article • Journal of Applied Polymer Science, July 1992, Wiley

    Professor Jozsef Karger-Kocsis

  369. Assignment of acoustic emission to the failure sequence and damage zone growth in glass fiber strand mat-reinforced structural nylon RIM composites

    Article • Polymer Bulletin, July 1992, Springer Science + Business Media

    Professor Jozsef Karger-Kocsis

  370. Fracture and Failure Behavior of Glass Fiber Mat-Reinforced Structural Nylon Rim Composites

    Article • Journal of Polymer Engineering, June 1992, De Gruyter

    Professor Jozsef Karger-Kocsis

  371. Fracture and Fatigue Performance of Reaction Injection Molded Polyamide Block Copolymers and Their Milled Fiber Reinforced Composites

    Article • Journal of Polymer Engineering, June 1992, De Gruyter

    Professor Jozsef Karger-Kocsis

  372. Fatigue crack propagation and related failure in modified, andhydride-cured epoxy resins

    Article • Colloid & Polymer Science, June 1992, Springer Science + Business Media

    Professor Jozsef Karger-Kocsis, Professor Klaus Friedrich

  373. Microstructural aspects of fracture and fatigue behavior in short fiber-reinforced, injection-molded PPS-, PEEK- and PEN-composites

    Article • Polymer Bulletin, October 1991, Springer Science + Business Media

    Professor Jozsef Karger-Kocsis

  374. Effects of steel counterface roughness and temperature on the friction and wear of PE(E)K composites under dry sliding conditions

    Article • Wear, August 1991, Elsevier

    Professor Jozsef Karger-Kocsis, Professor Klaus Friedrich

  375. MICROSTRUCTURAL ASPECTS OF THE FATIGUE CRACK GROWTH IN POLYPROPYLENE AND ITS CHOPPED GLASS FIBER REINFORCED COMPOSITES

    Article • Journal of Polymer Engineering, March 1991, De Gruyter

    Professor Jozsef Karger-Kocsis

  376. Fatigue and Failure Behavior of Short and Long Glass Fiber Reinforced Injection-Molded Polypropylene

    Article • Science and Engineering of Composite Materials, January 1991, De Gruyter

    Professor Jozsef Karger-Kocsis, Professor Klaus Friedrich

  377. Mechanical Properties and Failure Behavior of Glass Fiber Mat-Reinforced Nylon RIM Composites

    Article • January 1991, Springer Science + Business Media

    Professor Jozsef Karger-Kocsis, Professor Klaus Friedrich

  378. Fatigue crack propagation in short and long glass fiber reinforced injection-molded polypropylene composites

    Article • Advanced Composite Materials, January 1991, Taylor & Francis

    Professor Jozsef Karger-Kocsis, Professor Klaus Friedrich

  379. Environmental stress corrosion behavior of polyamides and their composites with short glass fiber and glass swirl mat

    Article • Polymer Bulletin, January 1991, Springer Science + Business Media

    Professor Jozsef Karger-Kocsis

  380. Dynamic fracture mechanics of a RIM polyamide block copolymer reinforced with glass strand mat

    Article • Polymer Bulletin, September 1990, Springer Science + Business Media

    Professor Jozsef Karger-Kocsis

  381. Effects of processing induced microstructure on the fatigue crack propagation of unfilled and short fibre-reinforced PA-6

    Article • Composites, May 1990, Elsevier

    Professor Jozsef Karger-Kocsis

  382. Fracture Performance of Random, Continuous Glass Strand Reinforced Polyamide-RIM Composite

    Article • January 1990, Springer Science + Business Media

    Professor Jozsef Karger-Kocsis, Professor Klaus Friedrich

  383. Microstructure and Fracture Mechanical Performance of Short-Fibre Reinforced Thermoplastics

    Article • January 1989, Elsevier

    Professor Jozsef Karger-Kocsis

  384. ANNEALING EFFECTS ON THE FATIGUE CRACK PROPAGATION OF INJECTION MOULDED PEEK AND ITS SHORT-FIBRE COMPOSITES

    Article • Journal of Polymer Engineering, July 1988, De Gruyter

    Professor Jozsef Karger-Kocsis, Professor Klaus Friedrich

  385. Fatigue Resistance of Rubber Toughened Short Glass Fibre-Reinforced Polyamide-6 Composites

    Article • Journal of Thermoplastic Composite Materials, April 1988, SAGE Publications

    Professor Jozsef Karger-Kocsis, Professor Klaus Friedrich

  386. Fatigue crack propagation in short and long fibre-reinforced injection-moulded PA 6.6 composites

    Article • Composites, March 1988, Elsevier

    Professor Jozsef Karger-Kocsis, Professor Klaus Friedrich

  387. Fracture behavior of injection-molded short and long glass fiber—polyamide 6.6 composites

    Article • Composites Science and Technology, January 1988, Elsevier

    Professor Jozsef Karger-Kocsis, Professor Klaus Friedrich

  388. Microstructural details and the effect of testing conditions on the fracture toughness of injection-moulded poly(phenylene-sulphide) composites

    Article • Journal of Materials Science, March 1987, Springer Science + Business Media

    Professor Jozsef Karger-Kocsis, Professor Klaus Friedrich

  389. Skin-Core morphology and failure of injection-molded specimens of impact-modified polypropylene blends

    Article • Polymer Engineering & Science, February 1987, Wiley

    Professor Jozsef Karger-Kocsis

  390. Dynamic mechanical properties and morphology of polypropylene block copolymers and polypropylene/elastomer blends

    Article • Polymer Engineering & Science, February 1987, Wiley

    Professor Jozsef Karger-Kocsis

  391. Temperature and strain-rate effects on the fracture toughness of poly(ether ether ketone) and its short glass-fibre reinforced composite

    Article • Polymer, November 1986, Elsevier

    Professor Jozsef Karger-Kocsis, Professor Klaus Friedrich

  392. Effect of short fibre reinforcement on the fatigue crack propagation and fracture of PEEK-matrix composites

    Article • Composites, July 1986, Elsevier

    Professor Jozsef Karger-Kocsis, Professor Klaus Friedrich

  393. Relation between the microstructure and the dynamical mechanical properties of rigid PVC modified by chlorinated polyethylene

    Article • September 1984, Wiley

    Professor Jozsef Karger-Kocsis

  394. Phase structure of impact-modified polypropylene blends

    Article • Polymer, February 1984, Elsevier

    Professor Jozsef Karger-Kocsis

  395. Dynamic mechanical and impact properties of polypropylene/EPDM blends

    Article • Polymer, May 1982, Elsevier

    Professor Jozsef Karger-Kocsis

  396. DSC investigations on the alkaline polymerization ofε-caprolactam

    Article • Journal of Thermal Analysis and Calorimetry, August 1980, Springer Science + Business Media

    Professor Jozsef Karger-Kocsis

  397. Comparative thermal and thermomechanical properties of hot melt adhesives

    Article • International Journal of Adhesion and Adhesives, July 1980, Elsevier

    Professor Jozsef Karger-Kocsis

  398. Morphological study on the effect of elastomeric impact modifiers in polypropylene systems

    Article • Polymer, January 1979, Elsevier

    Professor Jozsef Karger-Kocsis

  399. Structural memory in chromium coordinated polyamides

    Article • Polymer, June 1977, Elsevier

    Professor Jozsef Karger-Kocsis

  400. Increase of the melt viscosity of polycaproamide by chromium (III) ions

    Article • Polymer, December 1975, Elsevier

    Professor Jozsef Karger-Kocsis

  401. Layered Silicate/Rubber Nanocomposites via Latex and Solution Intercalations

    Article • Springer Science + Business Media

    Professor Jozsef Karger-Kocsis

  402. A Model for the Accurate Prediction of the Residual Strength after Damage Due to Impact and Erosion of FRPs

    Article • Springer Science + Business Media

    Professor Jozsef Karger-Kocsis