Professor Chang-Jiu Li

All Stories

B2O3 fluxing-assisted bonding mechanisms enabling plasma spraying of gas-tight corrosion-resistant NiCrB coating

Article • Journal of Material Science and Technology, July 2026, Elsevier

Professor Chang-Jiu Li
A new approach to enhancing metallurgical bonding via oxide scale fragmentation in cold-sprayed Ti6Al4V coatings

Article • Journal of Material Science and Technology, February 2026, Elsevier

Professor Chang-Jiu Li
Effect of high-temperature molten oxides within in-flight droplet on the bonding formation mechanism between NiCrAlY splat and substrate

Article • Surface and Coatings Technology, November 2025, Elsevier

Professor Chang-Jiu Li
Effects of diamond size and content in Ni/Al/diamond composite powders on in-flight Ni Al particle oxidation behavior and microstructure of the coatings by atmospheric plasma spraying

Article • Diamond and Related Materials, November 2025, Elsevier

Professor Chang-Jiu Li
Key Factors Governing the Deposition of Hard Phases when Cold Spraying Metallic Matrix with Mechanically Mixed Powders

Article • Journal of Thermal Spray Technology, October 2025, Springer Science + Business Media

Professor Chang-Jiu Li
Effect of (Hf, Zr, Nb, Ti)C high-entropy ceramic powders on ablation property of C/C-(Hf, Zr, Nb, Ti)C-SiC composites and its ablative mechanism under long time ablation

Article • Journal of Alloys and Compounds, October 2025, Elsevier

Professor Chang-Jiu Li
Revolutionizing plasma sprayed LSCF cathodes: Fe-induced phase restoration and enhanced electrochemical performance for high-efficiency SOFCs

Article • Chemical Engineering Journal, September 2025, Elsevier

Professor Chang-Jiu Li
A critical review on bismuth-based oxide ion electrolytes for low temperature solid oxide fuel cells: structure - chemical composition - ionic conductivity relationship

Article • International Journal of Hydrogen Energy, August 2025, Elsevier

Venkataraman Thangadurai, Professor Chang-Jiu Li
Cold-sprayed Cu-WC/Cu/Cu-Ni@W multilayer deposits for high-quality repair of Cu alloy electromagnetic rails

Article • Surface and Coatings Technology, August 2025, Elsevier

Professor Chang-Jiu Li
Effect of titanium and silicon oxides migration on oxide structure evolution and oxidation mechanism of (Zr0.25Hf0.25Ti0.25Ta0.25)C-30SiC at 1600 °C

Article • Ceramics International, July 2025, Elsevier

Professor Chang-Jiu Li
Microstructure and ablation behavior of a novel La2Hf2O7/ZrC-SiC/SiC graded coating for ablative protection up to 2400 °C

Article • Surface and Coatings Technology, July 2025, Elsevier

Professor Chang-Jiu Li
Superior corrosion-resistant cold sprayed titanium coatings with fully dense microstructure after electron beam modification

Article • Journal of Alloys and Compounds, July 2025, Elsevier

Professor Chang-Jiu Li
Viscous flow of Co-doped Gd0.1Ce0.9O2-δ electrolytes for low-temperature densification of thin layers in metal-supported solid oxide fuel cells

Article • International Journal of Hydrogen Energy, July 2025, Elsevier

Professor Chang-Jiu Li
High tensile adhesive strength NiCrMo coating enabled by plasma-spraying a Mo-clad NiCr powder for reliable bond coat application

Article • Surface and Coatings Technology, June 2025, Elsevier

Professor Chang-Jiu Li
Reconstructed oxide scale driving fracture behavior to improve cold spray bonding

Article • Surface and Coatings Technology, June 2025, Elsevier

Professor Chang-Jiu Li
Densification of Plasma‐Sprayed ScSZ Enables High Performance of Intermediate Temperature Solid Oxide Fuel Cells With EWSB/ScSZ Bilayer Electrolyte

Article • Fuel Cells, May 2025, Wiley

Professor Chang-Jiu Li
The Numerical Analysis of the Three Differently Modified Ar-H2 Atmospheric Plasma Spray Torches Toward Oxidation Control of Spraying Metal Particles

Article • Plasma Chemistry and Plasma Processing, April 2025, Springer Science + Business Media

Professor Chang-Jiu Li
Dense and fine grained IN718 superalloy additively manufactured by cold spraying with N2 gas at 10 MPa

Article • Materials Science and Engineering A, April 2025, Elsevier

Professor Chang-Jiu Li
Reactive self-consumption strategy to suppress SiO 2 phase transition-induced cracking

Article • Journal of Advanced Ceramics, March 2025, Tsinghua University Press

Professor Chang-Jiu Li
A Study of Particle Heating and Oxidation Protection in a Modified Internally Injected Ar–H2 Atmospheric Plasma Spraying Torch

Article • Plasma, February 2025, MDPI AG

Professor Chang-Jiu Li
Plasma Spray Deposition of Na3Zr2Si2PO12 Electrolyte for High-Performance All-Solid-State Sodium-Ion Battery

Article • Journal of Thermal Spray Technology, January 2025, Springer Science + Business Media

Professor Chang-Jiu Li
Demonstration of a 650 °C operating high-performance metal-supported solid oxide fuel cell using a Gd-doped CeO2 electrolyte, Ni anode and Sm(Ba0.5Sr0.5)Co2−xFexO5+δ–Ce

Article • Journal of Materials Chemistry A, January 2025, Royal Society of Chemistry

Venkataraman Thangadurai, Professor Chang-Jiu Li
Plasma Spraying of Ceramic Coating with All Interfaces Bonded Chemically through a Ceramic Bond Coat Thermally Grown on Metal Substrate

Article • Journal of Thermal Spray Technology, December 2024, Springer Science + Business Media

Professor Chang-Jiu Li
Air Plasma Spraying of MCrAlY Coatings with Low Oxide Content Enabled by Adding a Deoxidizer

Article • Journal of Thermal Spray Technology, December 2024, Springer Science + Business Media

Professor Chang-Jiu Li
Breaking the trade off between corrosion resistance and fatigue lifetime of the coated Mg alloy through cold spraying submicron-grain Al alloy coatings

Article • Journal of Magnesium and Alloys, October 2024, Tsinghua University Press

Professor Chang-Jiu Li
Effect of WC-17Co content on microstructure, mechanical properties and wear resistance of WC-17Co/Ni composites produced with cold spraying

Article • Surface and Coatings Technology, October 2024, Elsevier

Professor Chang-Jiu Li
Generating Oxide-free Molten Metal Droplets by Air Plasma Spraying Enabled by Deoxidizer Addition to the Feedstock Powders

Article • Journal of Thermal Spray Technology, September 2024, Springer Science + Business Media

Professor Chang-Jiu Li
Influence of Friction Stir Spot Processing on Grain Structure Evolution and Nanomechanical Behavior of Cold-Sprayed Al Coating on Ti Substrate

Article • Journal of Thermal Spray Technology, August 2024, Springer Science + Business Media

Professor Chang-Jiu Li
Plasma-sprayed Al-based coating with WC-addition for excellent corrosion resistance and enhanced wear protection of Mg alloys

Article • Transactions of Nonferrous Metals Society of China, July 2024, Elsevier

Professor Chang-Jiu Li
Enhanced high temperature ablation resistance of dense ZrB2–Al2TiO5 composite coating by very low-pressure plasma spraying

Article • Ceramics International, June 2024, Elsevier

Professor Chang-Jiu Li
Effect of Inter-Splat Bonding Quality on the Dependence of Wear Behavior of Plasma-Sprayed Stainless Steel Coating on Applied Load

Article • Journal of Thermal Spray Technology, May 2024, Springer Science + Business Media

Professor Chang-Jiu Li
High temperature hardness and thermal analysis of CoNiCrAlY alloys used as bond coats for thermal barrier coatings

Article • Journal of Materials Research and Technology, May 2024, Elsevier

Professor Chang-Jiu Li
Plasma sprayed K2Ti6O13 as thermal barrier coatings with high thermal swing for diesel piston enabled by inter-splat bonding and porosity tailoring

Article • Surface and Coatings Technology, May 2024, Elsevier

Professor Chang-Jiu Li
Improving the adhesion of cold sprayed Al deposits through in-situ micro-forging

Article • Journal of Materials Processing Technology, April 2024, Elsevier

Professor Chang-Jiu Li
Layer structure formation induced by in-situ deposit surface temperature under different scanning methods during thermal spraying

Article • Surface Science and Technology, December 2023, Springer Science + Business Media

Professor Chang-Jiu Li
A matching design co-enhancing thermal barrier and thermal cyclic performances of sintering-resistant coatings

Article • Ceramics International, December 2023, Elsevier

Professor Chang-Jiu Li
Unraveling microforging principle during in situ shot-peening-assisted cold spray additive manufacturing aluminum alloy through a multi-physics framework

Article • Materials & Design, December 2023, Elsevier

Professor Chang-Jiu Li
Microstructural Nano-Scale Evolution at Inter-Particles Bonding Interface of Cold-Sprayed Ti6Al4V Deposits During Heat Treatment

Article • Journal of Thermal Spray Technology, October 2023, Springer Science + Business Media

Professor Chang-Jiu Li
Oxidation protection dynamics of NiAl droplet by inflight in-situ carbon deoxidation during atmospheric plasma spraying for high performance NiAl coatings

Article • Journal of Materials Processing Technology, October 2023, Elsevier

Professor Chang-Jiu Li
Mo-alloyed stainless steel coating with improved cavitation erosion resistance by plasma spraying a specially designed core-shell-structured powder

Article • Wear, September 2023, Elsevier

Professor Chang-Jiu Li
Study on the oxidation resistance mechanism of self-healable NiAl coating deposited by atmospheric plasma spraying

Article • npj Materials Degradation, August 2023, Springer Science + Business Media

Professor Chang-Jiu Li
Atmospheric plasma-sprayed CuNiInB coatings of high fretting wear performance enabled by oxide-free metallic droplet deposition

Article • Surface and Coatings Technology, July 2023, Elsevier

Professor Chang-Jiu Li
Processing map of the in-situ micro-forging (MF) assisted cold spray for additive manufacturing of fully dense metals without MF particle inclusion

Article • Additive Manufacturing, July 2023, Elsevier

Professor Chang-Jiu Li
Study of annular coaxial powder feeding effect on the characteristics of laminar plasma jet and atmospheric cluster deposition

Article • Surface and Coatings Technology, July 2023, Elsevier

Professor Chang-Jiu Li
Key role of temperature on delamination in solid-state additive manufacturing via supersonic impact

Article • Materials Research Letters, June 2023, Taylor & Francis

Professor Chang-Jiu Li
Investigation on microstructure evolution of iron-based alloy via synchronous powder-feeding underwater laser additive

Article • Materials & Design, June 2023, Elsevier

Professor Chang-Jiu Li
Research advances on electrode materials for solid oxide electrolysis cells

Article • Progress in Natural Science Materials International, June 2023, Elsevier

Professor Chang-Jiu Li
A Novel Bond Coat with Excellent Adhesive Strength Deposited by Plasma-Spraying of Mo-Clad Core-Shell-Structured Metal Powders

Article • May 2023, ASM International

Professor Chang-Jiu Li
Heterogeneous layered structure in thermal barrier coatings by plasma spray-physical vapor deposition

Article • Journal of Advanced Ceramics, February 2023, Tsinghua University Press

Professor Chang-Jiu Li
Investigation on Microstructure Evolution of Iron-Based Alloy Via Synchronous Powder-Feeding Underwater Laser Additive

Article • January 2023, Elsevier

Professor Chang-Jiu Li
Processing Map of the In-Situ Micro-Forging Assisted Cold Spray for Additive Manufacturing of Fully Dense Metals Without Contamination

Article • January 2023, Elsevier

Professor Chang-Jiu Li
Stabilities and performance of single cubic phase dysprosium and zirconium co-doped bismuth oxide electrolytes for low temperature solid oxide fuel cells

Article • Materials Advances, January 2023, Royal Society of Chemistry

Professor Chang-Jiu Li
MoSi2 addition for high ablation resistance of dense ZrB2-based composite coating prepared by very low-pressure plasma spraying

Article • Corrosion Science, December 2022, Elsevier

Professor Chang-Jiu Li
A review and progress of multiphase flows in atmospheric and low pressure plasma spray advanced coating

Article • Materials Today Physics, October 2022, Elsevier

Professor Chang-Jiu Li
Microstructure and properties of lightweight Al0.2CrNbTiV refractory high entropy alloy coating with different dilutions deposited by high speed laser cladding

Article • Surface and Coatings Technology, October 2022, Elsevier

Professor Chang-Jiu Li
Modeling of the Effect of Carrier Gas Injection on the Laminarity of the Plasma Jet Generated by a Cascaded Spray Gun

Article • Coatings, September 2022, MDPI AG

Professor Chang-Jiu Li
Li3PO4 electrolyte of high conductivity for all-solid-state lithium battery prepared by plasma spray

Article • Journal of the European Ceramic Society, August 2022, Elsevier

Professor Chang-Jiu Li
Critical scale grain size for optimal lifetime of TBCs

Article • Journal of Material Science and Technology, July 2022, Elsevier

Professor Chang-Jiu Li
Thermally sprayed MCO/FeCr24 interconnector with improved stability for tubular segmented-in-series SOFCs

Article • Applied Surface Science, June 2022, Elsevier

Professor Chang-Jiu Li
Achieving high anti-sintering performance of plasma-sprayed YSZ thermal barrier coatings through pore structure design

Article • Surface and Coatings Technology, April 2022, Elsevier

Professor Chang-Jiu Li
The Bonding Formation during Thermal Spraying of Ceramic Coatings: A Review

Article • Journal of Thermal Spray Technology, April 2022, Springer Science + Business Media

Professor Chang-Jiu Li
Recent progress of perovskite-based electrolyte materials for solid oxide fuel cells and performance optimizing strategies for energy storage applications

Article • Materials Research Bulletin, February 2022, Elsevier

Professor Chang-Jiu Li
Sintering behavior of BaCe0.7Zr0.1Y0.2O3-δ electrolyte at 1150 °C with the utilization of CuO and Bi2O3 as sintering aids and its electrical performance

Article • International Journal of Hydrogen Energy, February 2022, Elsevier

Professor Chang-Jiu Li
Recent Research Advances in Plasma Spraying of Bulk-Like Dense Metal Coatings with Metallurgically Bonded Lamellae

Article • Journal of Thermal Spray Technology, January 2022, Springer Science + Business Media

Professor Chang-Jiu Li
Effect of Li2O Sintering Aid on Sintering Characteristics and Electrical Conductivity of LSGM Electrolyte for Solid Oxide Fuel Cell

Article • Journal of Inorganic Materials, January 2022, Shanghai Institute of Ceramics

Professor Chang-Jiu Li
Plasma-Sprayed (Bi2O3)0.705 (Er2O3)0.245 (WO3)0.05 Electrolyte for Intermediate-Temperature Solid Oxide Fuel Cells (IT-SOFCs)

Article • Journal of Thermal Spray Technology, January 2022, Springer Science + Business Media

Professor Chang-Jiu Li
Recent advancements, doping strategies and the future perspective of perovskite-based solid oxide fuel cells for energy conversion

Article • Chemical Engineering Journal, January 2022, Elsevier

Professor Chang-Jiu Li
Microstructure and Ablation Behavior of Low-Pressure Plasma Sprayed ZrB2 Coatings Down to 100 Pa

Article • Journal of Thermal Spray Technology, December 2021, Springer Science + Business Media

Professor Chang-Jiu Li
Enhancing the hot-corrosion resistance of atmospheric plasma sprayed Ni-based coatings by adding a deoxidizer

Article • Materials & Design, December 2021, Elsevier

Professor Chang-Jiu Li
In-situ heating effect of laminar plasma jet during Mo coatings deposition

Article • Materials Letters, December 2021, Elsevier

Professor Chang-Jiu Li
Towards better understanding supersonic impact-bonding behavior of cold sprayed 6061-T6 aluminum alloy based on a high-accuracy material model

Article • Additive Manufacturing, December 2021, Elsevier

Professor Chang-Jiu Li
Low-pressure plasma-induced physical vapor deposition of advanced thermal barrier coatings: Microstructures, modelling and mechanisms

Article • Materials Today Physics, November 2021, Elsevier

Professor Chang-Jiu Li
TGO and Al diffusion behavior of CuAlxNiCrFe high-entropy alloys fabricated by high-speed laser cladding for TBC bond coats

Article • Corrosion Science, November 2021, Elsevier

Professor Chang-Jiu Li
Nanocrystallization of interfacial microstructure of deformed particles in cold sprayed Ti6Al4V deposits

Article • Materials & Design, November 2021, Elsevier

Professor Chang-Jiu Li
Corrosion and wear resistant WC17Co-TC4 composite coatings with fully dense microstructure enabled by in-situ forging of the large-sized WC17Co particles in cold spray

Article • Journal of Materials Processing Technology, October 2021, Elsevier

Professor Chang-Jiu Li
Investigation on solidification structure and temperature field with novel processing of synchronous powder-feeding underwater laser cladding

Article • Journal of Materials Processing Technology, October 2021, Elsevier

Professor Chang-Jiu Li
Numerical Analysis of the Interactions between Plasma Jet and Powder Particles in PS-PVD Conditions

Article • Coatings, September 2021, MDPI AG

Professor Chang-Jiu Li
Cold sprayed superhydrophilic porous metallic coating for enhancing the critical heat flux of the pressurized water-cooled reactor vessel in nuclear power plants

Article • Surface and Coatings Technology, September 2021, Elsevier

Professor Chang-Jiu Li
Plasma-sprayed lanthanum-doped strontium titanate as an interconnect for solid oxide fuel cells: Effects of powder size and process conditions

Article • Journal of Alloys and Compounds, September 2021, Elsevier

Professor Chang-Jiu Li
Preparation of bulk-like La0.8Sr0.2Ga0.8Mg0.2O3-δ coatings for porous metal-supported solid oxide fuel cells via plasma spraying at increased particle temperatures

Article • International Journal of Hydrogen Energy, September 2021, Elsevier

Professor Chang-Jiu Li
Sintering behavior and electrochemical performance of A-site deficient SrxTi0.3Fe0·7O3-δ oxygen electrodes for solid oxide electrochemical cells

Article • Ceramics International, September 2021, Elsevier

Professor Chang-Jiu Li
Vacuum cold sprayed nanostructured La0.6Sr0.4Co0.2Fe0.8O3−δ as a high-performance cathode for porous metal-supported solid oxide fuel cells operating below 600 °C

Article • Materials Today Energy, September 2021, Elsevier

Professor Chang-Jiu Li
Effect of friction stir spot processing on microstructure and mechanical properties of cold-sprayed Al coating on Ti substrate

Article • Surface and Coatings Technology, September 2021, Elsevier

Professor Chang-Jiu Li
Oxidation behavior and interface diffusion of porous metal supported SOFCs with all plasma sprayed functional layers in air at 650oC

Article • International Journal of Green Energy, August 2021, Taylor & Francis

Professor Chang-Jiu Li
Novel long laminar plasma sprayed hybrid structure thermal barrier coatings for high-temperature anti-sintering and volcanic ash corrosion resistance

Article • Journal of Material Science and Technology, July 2021, Elsevier

Professor Chang-Jiu Li
Numerical Simulation of Plasma Jet Characteristics under Very Low-Pressure Plasma Spray Conditions

Article • Coatings, June 2021, MDPI AG

Professor Chang-Jiu Li
Formation of Intermetallic Compounds in a Cold-Sprayed Aluminum Coating on Magnesium Alloy Substrate after Friction Stir-Spot-Processing

Article • Journal of Thermal Spray Technology, June 2021, Springer Science + Business Media

Professor Chang-Jiu Li
Capturing cold-spray bonding features of pure Cu from in situ deformation behavior using a high-accuracy material model

Article • Surface and Coatings Technology, May 2021, Elsevier

Professor Chang-Jiu Li
Ni coatings for corrosion protection of Mg alloys prepared by an in-situ micro-forging assisted cold spray: Effect of powder feedstock characteristics

Article • Corrosion Science, May 2021, Elsevier

Professor Chang-Jiu Li
Fabrication of Nanostructured Cadmium Selenide Thin Films for Optoelectronics Applications

Article • Frontiers in Chemistry, April 2021, Frontiers

Professor Chang-Jiu Li
Lightweight epoxy-based abradable seal coating with high bonding strength

Article • Journal of Material Science and Technology, April 2021, Elsevier

Professor Chang-Jiu Li
Microstructural analysis of highly active cathode material La0.7Sr0.3Ti0.15Fe0.65Ni0.2O3-δ (LSTFN) by optimizing different processing parameters

Article • Ceramics International, April 2021, Elsevier

Professor Chang-Jiu Li
Numerical Analysis of Deformation Behavior and Interface Bonding of Ti6Al4V Particle After Subsequent Impact During Cold Spraying

Article • Journal of Thermal Spray Technology, March 2021, Springer Science + Business Media

Professor Chang-Jiu Li
Performance and Stability of Plasma-Sprayed 10 × 10 cm2 Self-sealing Metal-Supported Solid Oxide Fuel Cells

Article • Journal of Thermal Spray Technology, March 2021, Springer Science + Business Media

Professor Chang-Jiu Li
Cold spray (CS) deposition of a durable silver coating with high infrared reflectivity for radiation energy saving in the polysilicon CVD reactor

Article • Surface and Coatings Technology, March 2021, Elsevier

Professor Chang-Jiu Li
Dynamic evolution of oxide scale on the surfaces of feed stock particles from cracking and segmenting to peel-off while cold spraying copper powder having a high oxygen content

Article • Journal of Material Science and Technology, March 2021, Elsevier

Professor Chang-Jiu Li
Effect of coating composition on the micro-galvanic dissolution behavior and antifouling performance of plasma-sprayed laminated-structured Cu Ti composite coating

Article • Surface and Coatings Technology, March 2021, Elsevier

Professor Chang-Jiu Li
Highly active and novel A-site deficient symmetric electrode material (Sr0.3La0.7)1−x (Fe0.7Ti0.3)0.9Ni0.1O3−δ and its effect on electrochemical performance of SOFCs

Article • International Journal of Hydrogen Energy, February 2021, Elsevier

Professor Chang-Jiu Li
Improving deposition efficiency and inter-particle bonding of cold sprayed Cu through removing the surficial oxide scale of the feedstock powder

Article • Surface and Coatings Technology, February 2021, Elsevier

Professor Chang-Jiu Li
Enhancement of Corrosion Resistance and Tribological Properties of LA43M Mg Alloy by Cold-Sprayed Aluminum Coatings Reinforced with Alumina and Carbon Nanotubes

Article • Journal of Thermal Spray Technology, January 2021, Springer Science + Business Media

Professor Chang-Jiu Li
Enhanced Corrosion Resistance of a Double Ceramic Composite Coating Deposited by a Novel Method on Magnesium-Lithium Alloy (LA43M) Substrates

Article • Journal of Thermal Spray Technology, January 2021, Springer Science + Business Media

Professor Chang-Jiu Li
Impact of Microstructural Anisotropy of As-Cold-Sprayed Cu Deposits on its Annealing Effect

Article • Materials Science Forum, January 2021, Trans Tech Publications

Professor Chang-Jiu Li
Effect of Powder Particle Size and Spray Parameters on the Ni/Al Reaction During Plasma Spraying of Ni-Al Composite Powders

Article • Journal of Thermal Spray Technology, January 2021, Springer Science + Business Media

Professor Chang-Jiu Li
Plasma-Sprayed High-Performance (Bi2O3)0.75(Y2O3)0.25 Electrolyte for Intermediate-Temperature Solid Oxide Fuel Cells (IT-SOFCs)

Article • Journal of Thermal Spray Technology, January 2021, Springer Science + Business Media

Professor Chang-Jiu Li
The Stability of Metal-Supported SOFC Based on Thermally-Sprayed MCO/FeCr24 Interconnect

Article • SSRN Electronic Journal, January 2021, Elsevier

Professor Chang-Jiu Li
Atmospheric Plasma Spraying of Ni-Based Alloy Coating by Oxide-Free Droplets Based on De-Oxidizing Effect of Boron

Article • SSRN Electronic Journal, January 2021, Elsevier

Professor Chang-Jiu Li
Preparation of ZrB2-ZrC-SiC-ZrO2 nanopowders with in-situ grown homogeneously dispersed SiC nanowires

Article • Materials & Design, November 2020, Elsevier

Professor Chang-Jiu Li
Fabrication of Metal Matrix Composites via High-Speed Particle Implantation

Article • Journal of Thermal Spray Technology, October 2020, Springer Science + Business Media

Professor Chang-Jiu Li
Plasma-Sprayed Al Alloy Coating with Enhanced Lamellar Bonding Through Novel Self-Bonding Strategy

Article • JOM, October 2020, Springer Science + Business Media

Professor Chang-Jiu Li
Self-Bonding Effect Development for Plasma Spraying of Stainless Steel Coating Through Using Mo-Clad Stainless Steel Powders

Article • JOM, October 2020, Springer Science + Business Media

Professor Chang-Jiu Li
Narrow and Thin Copper Linear Pattern Deposited by Vacuum Cold Spraying and Deposition Behavior Simulation

Article • Journal of Thermal Spray Technology, October 2020, Springer Science + Business Media

Professor Chang-Jiu Li
Deposition and oxidation behavior of atmospheric laminar plasma sprayed Mo coatings from 200 mm to 400 mm under 20 kW: Numerical and experimental analyses

Article • Surface and Coatings Technology, October 2020, Elsevier

Professor Chang-Jiu Li
Development of a material model for predicting extreme deformation and grain refinement during cold spraying

Article • Acta Materialia, October 2020, Elsevier

Professor Chang-Jiu Li
High performance of ceramic current collector fabricated at 550 °C through in-situ joining of reduced Mn1.5Co1.5O4 for metal-supported solid oxide fuel cells

Article • International Journal of Hydrogen Energy, October 2020, Elsevier

Professor Chang-Jiu Li
Measurement and analysis of cold spray residual stress using arbitrary Lagrangian–Eulerian method

Article • Additive Manufacturing, October 2020, Elsevier

Professor Chang-Jiu Li
Performance evaluation of highly active and novel La0.7Sr0.3Ti0.1Fe0.6Ni0.3O3-δ material both as cathode and anode for intermediate-temperature symmetrical solid oxide fuel cell

Article • Journal of Power Sources, October 2020, Elsevier

Professor Chang-Jiu Li
Self-Sealing Metal-Supported SOFC Fabricated by Plasma Spraying and Its Performance under Unbalanced Gas Pressure

Article • Journal of Thermal Spray Technology, September 2020, Springer Science + Business Media

Professor Chang-Jiu Li
Study on Deposition Behavior of Less Than 5 μm YSZ Particles in VLPPS

Article • Journal of Thermal Spray Technology, September 2020, Springer Science + Business Media

Professor Chang-Jiu Li
High-temperature oxidation behavior of CuAlNiCrFe high-entropy alloy bond coats deposited using high-speed laser cladding process

Article • Surface and Coatings Technology, September 2020, Elsevier

Professor Chang-Jiu Li
Micro-nano structured functional coatings deposited by liquid plasma spraying

Article • Journal of Advanced Ceramics, August 2020, Tsinghua University Press

Professor Chang-Jiu Li
Splash involved deposition behavior and erosion mechanism of long laminar plasma sprayed NiCrBSi coatings

Article • Surface and Coatings Technology, August 2020, Elsevier

Professor Chang-Jiu Li
Enhanced corrosion resistance of cold-sprayed and shot-peened aluminum coatings on LA43M magnesium alloy

Article • Surface and Coatings Technology, July 2020, Elsevier

Professor Chang-Jiu Li
Superior oxidation resistant MCrAlY bond coats prepared by controlled atmosphere heat treatment

Article • Corrosion Science, July 2020, Elsevier

Professor Chang-Jiu Li
Numerical analysis of the plasma-induced self-shadowing effect of impinging particles and phase transformation in a novel long laminar plasma jet

Article • Journal of Physics D Applied Physics, June 2020, Institute of Physics Publishing

Professor Chang-Jiu Li
Effects of different sulfonation times and post-treatment methods on the characterization and cytocompatibility of sulfonated PEEK

Article • Journal of Biomaterials Applications, June 2020, SAGE Publications

Professor Chang-Jiu Li
Improving adhesive strength of WC-CoCr coating with novel bimodal roughening substrate: Finite element modeling

Article • Ceramics International, June 2020, Elsevier

Professor Chang-Jiu Li
Structured La0.6Sr0.4Co0.2Fe0.8O3-δ cathode with large-scale vertical cracks by atmospheric laminar plasma spraying for IT-SOFCs

Article • Journal of Alloys and Compounds, June 2020, Elsevier

Professor Chang-Jiu Li
Microstructure of Cross-Linked High Densification Network and Strengthening Mechanism in Cold-Sprayed Ti-6Al-4V Coating After Heat Treatment

Article • Journal of Thermal Spray Technology, May 2020, Springer Science + Business Media

Professor Chang-Jiu Li
Micrographic Properties of Composite Coatings Prepared on TA2 Substrate by Hot-Dipping in Al–Si Alloy and Using Micro-Arc Oxidation Technologies (MAO)

Article • Coatings, April 2020, MDPI AG

Professor Chang-Jiu Li
On the surface and system performance of thermally sprayed carbide coatings produced under controlled residual stresses

Article • Surface and Coatings Technology, April 2020, Elsevier

Professor Chang-Jiu Li
Correlating particle impact condition with microstructure and properties of the cold-sprayed metallic deposits

Article • Journal of Material Science and Technology, March 2020, Elsevier

Professor Chang-Jiu Li
Effect of water environment on particle deposition of underwater cold spray

Article • Applied Surface Science, March 2020, Elsevier

Professor Chang-Jiu Li
Construction of plasma sprayed surfaces with various scales and the effect on hydrophobicity

Article • Surface and Coatings Technology, March 2020, Elsevier

Professor Chang-Jiu Li
Microstructures of aluminum surfaces reinforced with 316L stainless steel particles via high-speed particle injection and the resulting double-strengthening mechanism

Article • Surface and Coatings Technology, March 2020, Elsevier

Professor Chang-Jiu Li
Solid-state additive manufacturing high performance aluminum alloy 6061 enabled by an in-situ micro-forging assisted cold spray

Article • Materials Science and Engineering A, March 2020, Elsevier

Professor Chang-Jiu Li
Plasma spray–physical vapor deposition toward advanced thermal barrier coatings: a review

Article • Rare Metals, February 2020, Springer Science + Business Media

Professor Chang-Jiu Li
Corrigendum to “Strain-induced multiscale structural changes in lamellar thermal barrier coatings” [Ceramics Int. 43 2 (2017) 2252–2266]

Article • Ceramics International, February 2020, Elsevier

Professor Chang-Jiu Li
Dense Mn1.5Co1.5O4 coatings with excellent long-term stability and electrical performance under the SOFC cathode environment

Article • Applied Surface Science, January 2020, Elsevier

Professor Chang-Jiu Li
Improving WC-Co coating adhesive strength on rough substrate: Finite element modeling and experiment

Article • Journal of Material Science and Technology, January 2020, Elsevier

Professor Chang-Jiu Li
Advanced oxygen-electrode-supported solid oxide electrochemical cells with Sr(Ti,Fe)O3−δ-based fuel electrodes for electricity generation and hydrogen production

Article • Journal of Materials Chemistry A, January 2020, Royal Society of Chemistry

Professor Chang-Jiu Li
A Novel Strategy for Depositing Dense Self-fluxing Alloy Coatings with Sufficiently Bonded Splats by One-Step Atmospheric Plasma Spraying

Article • Journal of Thermal Spray Technology, December 2019, Springer Science + Business Media

Professor Chang-Jiu Li
Development of ScSZ Electrolyte by Very Low Pressure Plasma Spraying for High-Performance Metal-Supported SOFCs

Article • Journal of Thermal Spray Technology, December 2019, Springer Science + Business Media

Professor Chang-Jiu Li
Optimization of Plasma-Sprayed Lanthanum Chromite Interconnector Through Powder Design and Critical Process Parameters Control

Article • Journal of Thermal Spray Technology, December 2019, Springer Science + Business Media

Professor Chang-Jiu Li
Corrigendum to “Force transmission and its effect on structural changes in plasma-sprayed lamellar ceramic coatings” [J. Eur. Ceram. Soc. 37 June (8) (2017) 2877–2888]

Article • Journal of the European Ceramic Society, November 2019, Elsevier

Professor Chang-Jiu Li
Effects of Powder Structure and Size on Gd2O3 Preferential Vaporization During Plasma Spraying of Gd2Zr2O7

Article • Journal of Thermal Spray Technology, November 2019, Springer Science + Business Media

Professor Chang-Jiu Li
Morphology of composite coatings formed on Mo1 substrate using hot-dip aluminising and micro-arc oxidation techniques

Article • Applied Surface Science, November 2019, Elsevier

Professor Chang-Jiu Li
Corrigendum to “Strain-induced stiffness-dependent structural changes and the associated failure mechanism in TBCs” [J. Eur. Ceram. Soc. 37 (June (11)) (2017) 3609–3621]

Article • Journal of the European Ceramic Society, November 2019, Elsevier

Professor Chang-Jiu Li
Corrigendum to “Substrate-constrained effect on the stiffening behavior of lamellar thermal barrier coatings” [J. Eur. Ceram. Soc. 38 June (6) (2018) 579–2587]

Article • Journal of the European Ceramic Society, October 2019, Elsevier

Professor Chang-Jiu Li
Deposition of fully dense Al-based coatings via in-situ micro-forging assisted cold spray for excellent corrosion protection of AZ31B magnesium alloy

Article • Journal of Alloys and Compounds, October 2019, Elsevier

Professor Chang-Jiu Li
Large-grain α-Al2O3 enabling ultra-high oxidation-resistant MCrAlY bond coats by surface pre-agglomeration treatment

Article • Corrosion Science, October 2019, Elsevier

Professor Chang-Jiu Li
Enhanced Electrochemical and Tribological Properties of AZ91D Magnesium Alloy via Cold Spraying of Aluminum Alloy

Article • Journal of Thermal Spray Technology, September 2019, Springer Science + Business Media

Professor Chang-Jiu Li
Bioinspired Mechanically Robust Metal‐Based Water Repellent Surface Enabled by Scalable Construction of a Flexible Coral‐Reef‐Like Architecture

Article • Small, August 2019, Wiley

Professor Chang-Jiu Li
Corrigendum to “A comprehensive mechanism for the sintering of plasma-sprayed nanostructured thermal barrier coatings” [Ceram. Int. 43 (2017) 9600–9615]

Article • Ceramics International, August 2019, Elsevier

Professor Chang-Jiu Li
Effect of substrate temperature on the microstructure and interface bonding formation of plasma sprayed Ni20Cr splat

Article • Surface and Coatings Technology, August 2019, Elsevier

Professor Chang-Jiu Li
Transport and deposition behaviors of vapor coating materials in plasma spray-physical vapor deposition

Article • Applied Surface Science, August 2019, Elsevier

Professor Chang-Jiu Li
Corrigendum to “A comprehensive sintering mechanism for TBCs‐Part II: Multiscale multipoint interconnection‐enhanced initial kinetics”

Article • Journal of the American Ceramic Society, July 2019, Wiley

Professor Chang-Jiu Li
Characterization of Self-Sealed Metal Supported SOFCs with the Very Low Pressure Plasma Sprayed ScSZ Electrolyte

Article • ECS Transactions, July 2019, The Electrochemical Society

Professor Chang-Jiu Li
The Characteristics of Cermet-Supported Tubular Solid Oxide Fuel Cells Manufactured by Thermal Spraying

Article • ECS Transactions, July 2019, The Electrochemical Society

Professor Chang-Jiu Li
Effect of SrTi0.3Fe0.6Co0.1O3 Infiltration on the Performance of LSM-YSZ Cathode Supported Solid Oxide Fuel Cells with Sr(Ti,Fe)O3 Anodes

Article • ECS Transactions, July 2019, The Electrochemical Society

Professor Chang-Jiu Li
Pores Structure Change Induced by Heat Treatment in Cold-Sprayed Ti6Al4V Coating

Article • Journal of Thermal Spray Technology, June 2019, Springer Science + Business Media

Professor Chang-Jiu Li
Numerical simulation of the flow characteristics inside a novel plasma spray torch

Article • Journal of Physics D Applied Physics, June 2019, Institute of Physics Publishing

Professor Chang-Jiu Li
Electrochemical performance and stability of SrTi0.3Fe0.6Co0.1O3-δ infiltrated La0.8Sr0.2MnO3Zr0.92Y0.16O2-δ oxygen electrodes for intermediate-temperature solid oxide electrochemical cells

Article • Journal of Power Sources, June 2019, Elsevier

Professor Chang-Jiu Li
Highly oxidation resistant MCrAlY bond coats prepared by heat treatment under low oxygen content

Article • Surface and Coatings Technology, June 2019, Elsevier

Professor Chang-Jiu Li
Highly stable carbon-based perovskite solar cell with a record efficiency of over 18% via hole transport engineering

Article • Journal of Material Science and Technology, June 2019, Elsevier

Professor Chang-Jiu Li
Combined effect of internal and external factors on sintering kinetics of plasma-sprayed thermal barrier coatings

Article • Journal of the European Ceramic Society, May 2019, Elsevier

Professor Chang-Jiu Li
Microstructural evolution of alumina coatings by a novel long laminar plasma spraying method

Article • Surface and Coatings Technology, April 2019, Elsevier

Professor Chang-Jiu Li
Bonding strength of Cu-to-Cu joints using Cu cold spray deposition by an oxidation and reduction process for power device package

Article • April 2019, Institute of Electrical & Electronics Engineers (IEEE)

Professor Chang-Jiu Li
Morphology and Wear Resistance of Composite Coatings Formed on a TA2 Substrate Using Hot-Dip Aluminising and Micro-Arc Oxidation Technologies

Article • Materials, March 2019, MDPI AG

Professor Chang-Jiu Li
Cracking induced tribological behavior changes for the HVOF WC-12Co cermet coatings

Article • Ceramics International, March 2019, Elsevier

Professor Chang-Jiu Li
Molecular dynamics simulation and experimental verification for bonding formation of solid-state TiO2 nano-particles induced by high velocity collision

Article • Ceramics International, March 2019, Elsevier

Professor Chang-Jiu Li
Thermodynamic conditions for cluster formation in supersaturated boundary layer during plasma spray-physical vapor deposition

Article • Applied Surface Science, March 2019, Elsevier

Professor Chang-Jiu Li
Visible light enhanced black NiO sensors for ppb-level NO2 detection at room temperature

Article • Ceramics International, March 2019, Elsevier

Professor Chang-Jiu Li
Generation of Long Laminar Plasma Jets: Experimental and Numerical Analyses

Article • Plasma Chemistry and Plasma Processing, January 2019, Springer Science + Business Media

Professor Chang-Jiu Li
High stability SrTi1−xFexO3−δ electrodes for oxygen reduction and oxygen evolution reactions

Article • Journal of Materials Chemistry A, January 2019, Royal Society of Chemistry

Professor Chang-Jiu Li
Plasma Spraying of Dense Ceramic Coating with Fully Bonded Lamellae Through Materials Design Based on the Critical Bonding Temperature Concept

Article • Journal of Thermal Spray Technology, January 2019, Springer Science + Business Media

Professor Chang-Jiu Li
Comprehensive dynamic failure mechanism of thermal barrier coatings based on a novel crack propagation and TGO growth coupling model

Article • Ceramics International, December 2018, Elsevier

Professor Chang-Jiu Li
Prolong the durability of La2Zr2O7/YSZ TBCs by decreasing the cracking driving force in ceramic coatings

Article • Journal of the European Ceramic Society, December 2018, Elsevier

Professor Chang-Jiu Li
Mechanical performance of plasma-sprayed bulk-like NiCrMo coating with a novel shell-core-structured NiCr-Mo particle

Article • Surface and Coatings Technology, November 2018, Elsevier

Professor Chang-Jiu Li
Wettability transition on micro-nano hierarchical structured Ni20Cr coating surface by selective spontaneous adsorption during vacuum evacuation

Article • Materials Chemistry and Physics, November 2018, Elsevier

Professor Chang-Jiu Li
Deposition behavior, microstructure and mechanical properties of an in-situ micro-forging assisted cold spray enabled additively manufactured Inconel 718 alloy

Article • Materials & Design, October 2018, Elsevier

Professor Chang-Jiu Li
Local microstructure inhomogeneity and gas temperature effect in in-situ shot-peening assisted cold-sprayed Ti-6Al-4V coating

Article • Journal of Alloys and Compounds, October 2018, Elsevier

Professor Chang-Jiu Li
A novel structure of YSZ coatings by atmospheric laminar plasma spraying technology

Article • Scripta Materialia, August 2018, Elsevier

Professor Chang-Jiu Li
Achieving the high phase purity of CH3NH3PbI3 film by two-step solution processable crystal engineering

Article • Journal of Material Science and Technology, August 2018, Elsevier

Professor Chang-Jiu Li
Highly oxidation resistant and cost effective MCrAlY bond coats prepared by controlled atmosphere heat treatment

Article • Surface and Coatings Technology, August 2018, Elsevier

Professor Chang-Jiu Li
La 0.8 Sr 0.2 Ga 0.8 Mg 0.2 O 3 electrolytes prepared by vacuum cold spray under heated gas for improved performance of SOFCs

Article • Ceramics International, August 2018, Elsevier

Professor Chang-Jiu Li
Stage-sensitive microstructural evolution of nanostructured TBCs during thermal exposure

Article • Journal of the European Ceramic Society, August 2018, Elsevier

Professor Chang-Jiu Li
Strain/sintering co-induced multiscale structural changes in plasma-sprayed thermal barrier coatings

Article • Ceramics International, August 2018, Elsevier

Professor Chang-Jiu Li
Corrosion resistant nickel coating with strong adhesion on AZ31B magnesium alloy prepared by an in-situ shot-peening-assisted cold spray

Article • Corrosion Science, July 2018, Elsevier

Professor Chang-Jiu Li
Performance of La0.8Sr0.2Ga0.8Mg0.2O3-based SOFCs with atmospheric plasma sprayed La-doped CeO2 buffer layer

Article • Electrochimica Acta, June 2018, Elsevier

Professor Chang-Jiu Li
Substrate-constrained effect on the stiffening behavior of lamellar thermal barrier coatings

Article • Journal of the European Ceramic Society, June 2018, Elsevier

Professor Chang-Jiu Li
Vacuum heat treatment mechanisms promoting the adhesion strength of thermally sprayed metallic coatings

Article • Surface and Coatings Technology, June 2018, Elsevier

Professor Chang-Jiu Li
A new approach to prepare fully dense Cu with high conductivities and anti-corrosion performance by cold spray

Article • Journal of Alloys and Compounds, April 2018, Elsevier

Professor Chang-Jiu Li
Gradient thermal cyclic behaviour of La2Zr2O7/YSZ DCL-TBCs with equivalent thermal insulation performance

Article • Journal of the European Ceramic Society, April 2018, Elsevier

Professor Chang-Jiu Li
Sodium ionic conductivity and stability of amorphous Na 2 O·2SiO 2 added with M x O y (M = Zr, Y, and Sm)

Article • Materials & Design, April 2018, Elsevier

Professor Chang-Jiu Li
Novel Method of Aluminum to Copper Bonding by Cold Spray

Article • Journal of Thermal Spray Technology, March 2018, Springer Science + Business Media

Professor Chang-Jiu Li
Development of long laminar plasma jet on thermal spraying process: Microstructures of zirconia coatings

Article • Surface and Coatings Technology, March 2018, Elsevier

Professor Chang-Jiu Li
A comprehensive sintering mechanism for thermal barrier coatings-Part III: Substrate constraint effect on healing of 2D pores

Article • Journal of the American Ceramic Society, February 2018, Wiley

Professor Chang-Jiu Li
Effect of the shell-core-structured particle design on the heating characteristic of nickel-based alloy particle during plasma spraying

Article • Surface and Coatings Technology, February 2018, Elsevier

Professor Chang-Jiu Li
Effect of vapor deposition in shrouded plasma spraying on morphology and wettability of the metallic Ni20Cr coating surface

Article • Journal of Alloys and Compounds, February 2018, Elsevier

Professor Chang-Jiu Li
Sintering characteristics of plasma-sprayed TBCs: Experimental analysis and an overall modelling

Article • Ceramics International, February 2018, Elsevier

Professor Chang-Jiu Li
Tailoring the composite interface at lower temperature by the nanoscale interfacial active layer formed in cold sprayed cBN/NiCrAl nanocomposite

Article • Materials & Design, February 2018, Elsevier

Professor Chang-Jiu Li
Microstructure and Transparent Super-Hydrophobic Performance of Vacuum Cold-Sprayed Al2O3 and SiO2 Aerogel Composite Coating

Article • Journal of Thermal Spray Technology, January 2018, Springer Science + Business Media

Professor Chang-Jiu Li
Cobalt-substituted SrTi0.3Fe0.7O3−δ: a stable high-performance oxygen electrode material for intermediate-temperature solid oxide electrochemical cells

Article • Energy & Environmental Science, January 2018, Royal Society of Chemistry

Professor Chang-Jiu Li
Cost effective perovskite solar cells with a high efficiency and open-circuit voltage based on a perovskite-friendly carbon electrode

Article • Journal of Materials Chemistry A, January 2018, Royal Society of Chemistry

Professor Chang-Jiu Li
Gaseous material capacity of open plasma jet in plasma spray-physical vapor deposition process

Article • Applied Surface Science, January 2018, Elsevier

Professor Chang-Jiu Li
Low-temperature SnO2-modified TiO2 yields record efficiency for normal planar perovskite solar modules

Article • Journal of Materials Chemistry A, January 2018, Royal Society of Chemistry

Professor Chang-Jiu Li
Microstructure and Mechanical Properties of Al-Cu Joints by Cold Spray Bonding

Article • Journal of Mechanical Engineering, January 2018, Chinese Journal of Mechanical Engineering

Professor Chang-Jiu Li
Enhanced sintering behavior of LSGM electrolyte and its performance for solid oxide fuel cells deposited by vacuum cold spray

Article • Journal of the European Ceramic Society, December 2017, Elsevier

Professor Chang-Jiu Li
Influence of microstructure on the mechanical integrity of plasma-sprayed TiO2 splat

Article • Journal of the European Ceramic Society, December 2017, Elsevier

Professor Chang-Jiu Li
Sintering induced the failure behavior of dense vertically crack and lamellar structured TBCs with equivalent thermal insulation performance

Article • Ceramics International, December 2017, Elsevier

Professor Chang-Jiu Li
Effect of Post-spray Shot Peening Treatment on the Corrosion Behavior of NiCr-Mo Coating by Plasma Spraying of the Shell–Core–Structured Powders

Article • Journal of Thermal Spray Technology, November 2017, Springer Science + Business Media

Professor Chang-Jiu Li
The Effect of Molybdenum Substrate Oxidation on Molybdenum Splat Formation

Article • Journal of Thermal Spray Technology, November 2017, Springer Science + Business Media

Professor Chang-Jiu Li
Dependency of deposition behavior, microstructure and properties of cold sprayed Cu on morphology and porosity of the powder

Article • Surface and Coatings Technology, November 2017, Elsevier

Professor Chang-Jiu Li
Influence of pre-reduction on microstructure homogeneity and electrical properties of APS Mn1.5Co1.5O4 coatings for SOFC interconnects

Article • International Journal of Hydrogen Energy, November 2017, Elsevier

Professor Chang-Jiu Li
Fast Drying Boosted Performance Improvement of Low-Temperature Paintable Carbon-Based Perovskite Solar Cell

Article • ACS Sustainable Chemistry & Engineering, October 2017, American Chemical Society (ACS)

Professor Chang-Jiu Li
Effect of Fe doping on the performance of suspension plasma-sprayed PrBa0.5Sr0.5Co2−xFexO5+δ cathodes for intermediate-temperature solid oxide fuel cells

Article • Ceramics International, October 2017, Elsevier

Professor Chang-Jiu Li
Improving Erosion Resistance of Plasma-Sprayed Ceramic Coatings by Elevating the Deposition Temperature Based on the Critical Bonding Temperature

Article • Journal of Thermal Spray Technology, September 2017, Springer Science + Business Media

Professor Chang-Jiu Li
A comprehensive mechanism for the sintering of plasma-sprayed nanostructured thermal barrier coatings

Article • Ceramics International, September 2017, Elsevier

Professor Chang-Jiu Li
Strain-induced stiffness-dependent structural changes and the associated failure mechanism in TBCs

Article • Journal of the European Ceramic Society, September 2017, Elsevier

Professor Chang-Jiu Li
Evaporation of Droplets in Plasma Spray–Physical Vapor Deposition Based on Energy Compensation Between Self-Cooling and Plasma Heat Transfer

Article • Journal of Thermal Spray Technology, August 2017, Springer Science + Business Media

Professor Chang-Jiu Li
Epitaxial growth during the rapid solidification of plasma-sprayed molten TiO 2 splat

Article • Acta Materialia, August 2017, Elsevier

Professor Chang-Jiu Li
Force transmission and its effect on structural changes in plasma-sprayed lamellar ceramic coatings

Article • Journal of the European Ceramic Society, July 2017, Elsevier

Professor Chang-Jiu Li
Study on the Fabrication and Performance of Very Low Pressure Plasma Sprayed Porous Metal Supported Solid Oxide Fuel Cell

Article • ECS Meeting Abstracts, July 2017, The Electrochemical Society

Professor Chang-Jiu Li
Non-parabolic isothermal oxidation kinetics of low pressure plasma sprayed MCrAlY bond coat

Article • Applied Surface Science, June 2017, Elsevier

Professor Chang-Jiu Li
Atmospheric Plasma-Sprayed La0.3Sr0.7TiO3-δInterconnect for High-Temperature Solid Oxide Fuel Cells

Article • ECS Transactions, May 2017, The Electrochemical Society

Professor Chang-Jiu Li
Effect of Deposition Temperature on the Microstructure and Performance of Vacuum Cold Sprayed Nano-Structured LSCF Cathodes for Solid Oxide Fuel Cells

Article • ECS Transactions, May 2017, The Electrochemical Society

Professor Chang-Jiu Li
Microstructure and Electrochemical Properties of La0.8Sr0.2Ga0.8Mg0.2O3Thin Film Deposited by Vacuum Cold Spray for Solid Oxide Fuel Cells

Article • ECS Transactions, May 2017, The Electrochemical Society

Professor Chang-Jiu Li
Novel Approaches to Prepare the High Performance Dense Electolyte and Interconnect Applicable to SOFC by Atmospheric Plasma Spraying

Article • ECS Transactions, May 2017, The Electrochemical Society

Professor Chang-Jiu Li
Study on the Fabrication and Performance of Very Low Pressure Plasma Sprayed Porous Metal Supported Solid Oxide Fuel Cell

Article • ECS Transactions, May 2017, The Electrochemical Society

Professor Chang-Jiu Li
A comprehensive sintering mechanism for TBCs-Part II: Multiscale multipoint interconnection-enhanced initial kinetics

Article • Journal of the American Ceramic Society, May 2017, Wiley

Professor Chang-Jiu Li
Erratum to: The 2016 Thermal Spray Roadmap

Article • Journal of Thermal Spray Technology, May 2017, Springer Science + Business Media

Professor Chang-Jiu Li
Ultra-high open-circuit voltage of perovskite solar cells induced by nucleation thermodynamics on rough substrates

Article • Scientific Reports, April 2017, Springer Science + Business Media

Professor Chang-Jiu Li
Dominant effect of particle size on the CeO2 preferential evaporation during plasma spraying of La2Ce2O7

Article • Journal of the European Ceramic Society, April 2017, Elsevier

Professor Chang-Jiu Li
Effect of the powder particle structure and substrate hardness during vacuum cold spraying of Al 2 O 3

Article • Ceramics International, April 2017, Elsevier

Professor Chang-Jiu Li
Room-temperature nitrogen-dioxide sensors based on ZnO1−x coatings deposited by solution precursor plasma spray

Article • Sensors and Actuators B Chemical, April 2017, Elsevier

Professor Chang-Jiu Li
A comprehensive sintering mechanism for TBCs-Part I: An overall evolution with two-stage kinetics

Article • Journal of the American Ceramic Society, March 2017, Wiley

Professor Chang-Jiu Li
Dependence of scale thickness on the breaking behavior of the initial oxide on plasma spray bond coat surface during vacuum pre-treatment

Article • Applied Surface Science, March 2017, Elsevier

Professor Chang-Jiu Li
Sintering-induced delamination of thermal barrier coatings by gradient thermal cyclic test

Article • Journal of the American Ceramic Society, February 2017, Wiley

Professor Chang-Jiu Li
Strain-induced multiscale structural changes in lamellar thermal barrier coatings

Article • Ceramics International, February 2017, Elsevier

Professor Chang-Jiu Li
Formation of Lamellar Pores for Splats via Interfacial or Sub-interfacial Delamination at Chemically Bonded Region

Article • Journal of Thermal Spray Technology, February 2017, Springer Science + Business Media

Professor Chang-Jiu Li
The Correlation of the TBC Lifetimes in Burner Cycling Test with Thermal Gradient and Furnace Isothermal Cycling Test by TGO Effects

Article • Journal of Thermal Spray Technology, January 2017, Springer Science + Business Media

Professor Chang-Jiu Li
Super-Hydrophobic Surface Prepared by Lanthanide Oxide Ceramic Deposition Through PS-PVD Process

Article • Journal of Thermal Spray Technology, January 2017, Springer Science + Business Media

Professor Chang-Jiu Li
Suspension Plasma Sprayed Sr2Fe1.4Mo0.6O6−δ Electrodes for Solid Oxide Fuel Cells

Article • Journal of Thermal Spray Technology, January 2017, Springer Science + Business Media

Professor Chang-Jiu Li
Thermally Sprayed Large Tubular Solid Oxide Fuel Cells and Its Stack: Geometry Optimization, Preparation, and Performance

Article • Journal of Thermal Spray Technology, January 2017, Springer Science + Business Media

Professor Chang-Jiu Li
Large-area high-efficiency perovskite solar cells based on perovskite films dried by the multi-flow air knife method in air

Article • Journal of Materials Chemistry A, January 2017, Royal Society of Chemistry

Professor Chang-Jiu Li
Material nucleation/growth competition tuning towards highly reproducible planar perovskite solar cells with efficiency exceeding 20%

Article • Journal of Materials Chemistry A, January 2017, Royal Society of Chemistry

Professor Chang-Jiu Li
Small molecule-driven directional movement enabling pin-hole free perovskite film via fast solution engineering

Article • Nanoscale, January 2017, Royal Society of Chemistry

Professor Chang-Jiu Li
Optimization of In-Situ Shot-Peening-Assisted Cold Spraying Parameters for Full Corrosion Protection of Mg Alloy by Fully Dense Al-Based Alloy Coating

Article • Journal of Thermal Spray Technology, December 2016, Springer Science + Business Media

Professor Chang-Jiu Li
Edge Effect on Crack Patterns in Thermally Sprayed Ceramic Splats

Article • Journal of Thermal Spray Technology, December 2016, Springer Science + Business Media

Professor Chang-Jiu Li
Effect of Oxidation on the Bonding Formation of Plasma-Sprayed Stainless Steel Splats onto Stainless Steel Substrate

Article • Journal of Thermal Spray Technology, December 2016, Springer Science + Business Media

Professor Chang-Jiu Li
Atmospheric plasma-sprayed BaZr 0.1 Ce 0.7 Y 0.1 Yb 0.1 O 3−δ (BZCYYb) electrolyte membranes for intermediate-temperature solid oxide fuel cells

Article • Ceramics International, December 2016, Elsevier

Meilin Liu, Professor Chang-Jiu Li
Formation of Al2O3 diffusion barrier in cold-sprayed NiCoCrAlY/Ni multi-layered coatings on 304SS substrate

Article • Surface and Coatings Technology, December 2016, Elsevier

Professor Chang-Jiu Li
The 2016 Thermal Spray Roadmap

Article • Journal of Thermal Spray Technology, December 2016, Springer Science + Business Media

Professor Chang-Jiu Li
Relationship Between Designed Three-Dimensional YSZ Electrolyte Surface Area and Performance of Solution-Precursor Plasma-Sprayed La0.8Sr0.2MnO3−δ Cathodes

Article • Journal of Thermal Spray Technology, November 2016, Springer Science + Business Media

Professor Chang-Jiu Li
Non-destructive production of natural environment-adaptive super-hydrophobic hierarchical ceramic surface on a steel substrate

Article • Micro & Nano Letters, November 2016, the Institution of Engineering and Technology (the IET)

Professor Chang-Jiu Li
Aerosol sprayed Mn 1.5 Co 1.5 O 4 protective coatings for metallic interconnect of solid oxide fuel cells

Article • International Journal of Hydrogen Energy, November 2016, Elsevier

Meilin Liu, Professor Chang-Jiu Li
Properties evolution of plasma-sprayed La2Zr2O7 coating induced by pore structure evolution during thermal exposure

Article • Ceramics International, November 2016, Elsevier

Professor Chang-Jiu Li
Understanding the Formation of Limited Interlamellar Bonding in Plasma Sprayed Ceramic Coatings Based on the Concept of Intrinsic Bonding Temperature

Article • Journal of Thermal Spray Technology, October 2016, Springer Science + Business Media

Professor Chang-Jiu Li
Conditions and mechanisms for the bonding of a molten ceramic droplet to a substrate after high-speed impact

Article • Acta Materialia, October 2016, Elsevier

Professor Chang-Jiu Li
Liquid plasma sprayed nano-network La 0.4 Sr 0.6 Co 0.2 Fe 0.8 O 3 /Ce 0.8 Gd 0.2 O 2 composite as a high-performance cathode for intermediate-temperature solid oxide fuel cells

Article • Journal of Power Sources, September 2016, Elsevier

Meilin Liu, Professor Chang-Jiu Li
Facile and Scalable Fabrication of Highly Efficient Lead Iodide Perovskite Thin-Film Solar Cells in Air Using Gas Pump Method

Article • ACS Applied Materials & Interfaces, August 2016, American Chemical Society (ACS)

Professor Chang-Jiu Li
Investigation into the diffusion and oxidation behavior of the interface between a plasma-sprayed anode and a porous steel support for solid oxide fuel cells

Article • Journal of Power Sources, August 2016, Elsevier

Meilin Liu, Professor Chang-Jiu Li
Preparation of hierarchical porous metallic materials via deposition of microporous particles

Article • Materials Letters, August 2016, Elsevier

Professor Chang-Jiu Li
Effect of annealing conditions on in situ formation of Cr2O3 diffusion barrier

Article • Surface Engineering, July 2016, Taylor & Francis

Professor Chang-Jiu Li
Influence of TiO2 Film/Substrate Contact on Photovoltaic Performance and Improved Efficiency in Dye-Sensitized Solar Cells

Article • Journal of Nanoscience and Nanotechnology, July 2016, American Scientific Publishers

Professor Chang-Jiu Li
Realizing full coverage of perovskite film on substrate surface during solution processing: Characterization and elimination of uncovered surface

Article • Journal of Power Sources, July 2016, Elsevier

Professor Chang-Jiu Li
Hierarchical Formation of Intrasplat Cracks in Thermal Spray Ceramic Coatings

Article • Journal of Thermal Spray Technology, May 2016, Springer Science + Business Media

Professor Chang-Jiu Li
In Situ Formation of Continuous Charge Transfer Pathways for Highly Efficient, Solvent-Free, Polymer Electrolyte-Based Dye-Sensitized Solar Cells

Article • ACS Sustainable Chemistry & Engineering, May 2016, American Chemical Society (ACS)

Professor Chang-Jiu Li
An effective approach for creating metallurgical self-bonding in plasma-spraying of NiCr-Mo coating by designing shell-core-structured powders

Article • Acta Materialia, May 2016, Elsevier

Professor Chang-Jiu Li
Thermal stability of plasma-sprayed La2Ce2O7/YSZ composite coating

Article • Ceramics International, May 2016, Elsevier

Professor Chang-Jiu Li
Effect of spray conditions on deposition behavior and microstructure of cold sprayed Ni coatings sprayed with a porous electrolytic Ni powder

Article • Surface and Coatings Technology, March 2016, Elsevier

Professor Chang-Jiu Li
Application of high velocity oxygen fuel flame (HVOF) spraying to fabrication of La 0.8 Sr 0.2 Ga 0.8 Mg 0.2 O 3 electrolyte for solid oxide fuel cells

Article • Journal of Power Sources, January 2016, Elsevier

Meilin Liu, Professor Chang-Jiu Li
Thermally sprayed high-performance porous metal-supported solid oxide fuel cells with nanostructured La0.6Sr0.4Co0.2Fe0.8O3−δ cathodes

Article • Journal of Materials Chemistry A, January 2016, Royal Society of Chemistry

Meilin Liu, Professor Chang-Jiu Li
A comparison of cold spray deposition behavior between gas atomized and dendritic porous electrolytic Ni powders under the same spray conditions

Article • Materials Letters, January 2016, Elsevier

Professor Chang-Jiu Li
Impact of deposition temperature on crystalline structure of plasma-sprayed Al2O3 splats revealed by FIB-HRTEM technique

Article • Ceramics International, January 2016, Elsevier

Professor Chang-Jiu Li
Impact-induced bonding and boundary amorphization of TiN ceramic particles during room temperature vacuum cold spray deposition

Article • Ceramics International, January 2016, Elsevier

Professor Chang-Jiu Li
Preparation of flexible perovskite solar cells by a gas pump drying method on a plastic substrate

Article • Journal of Materials Chemistry A, January 2016, Royal Society of Chemistry

Professor Chang-Jiu Li
La2NiO4+δ Infiltration of Plasma-Sprayed LSCF Coating for Cathode Performance Improvement

Article • Journal of Thermal Spray Technology, December 2015, Springer Science + Business Media

Professor Chang-Jiu Li, Meilin Liu
Formation of Cr2O3 Diffusion Barrier Between Cr-Contained Stainless Steel and Cold-Sprayed Ni Coatings at High Temperature

Article • Journal of Thermal Spray Technology, December 2015, Springer Science + Business Media

Professor Chang-Jiu Li
Relationships between the properties and microstructure of Mo–Cu composites prepared by infiltrating copper into flame-sprayed porous Mo skeleton

Article • Materials & Design, December 2015, Elsevier

Professor Chang-Jiu Li
Plasma-Sprayed Thermal Barrier Coatings with Enhanced Splat Bonding for CMAS and Corrosion Protection

Article • Journal of Thermal Spray Technology, November 2015, Springer Science + Business Media

Professor Chang-Jiu Li
High Heat Insulating Thermal Barrier Coating Designed with Large Two-Dimensional Inter-lamellar Pores

Article • Journal of Thermal Spray Technology, November 2015, Springer Science + Business Media

Professor Chang-Jiu Li
The Microstructure Stability of Atmospheric Plasma-Sprayed MnCo2O4 Coating Under Dual-Atmosphere (H2/Air) Exposure

Article • Journal of Thermal Spray Technology, November 2015, Springer Science + Business Media

Professor Chang-Jiu Li
Microstructure and mechanical property of Ti and Ti6Al4V prepared by an in-situ shot peening assisted cold spraying

Article • Materials & Design, November 2015, Elsevier

Professor Chang-Jiu Li
The influence of temperature gradient across YSZ on thermal cyclic lifetime of plasma-sprayed thermal barrier coatings

Article • Ceramics International, November 2015, Elsevier

Professor Chang-Jiu Li
Large sized cubic BN reinforced nanocomposite with improved abrasive wear resistance deposited by cold spray

Article • Materials & Design, October 2015, Elsevier

Professor Chang-Jiu Li
Relationship Between Lamellar Structure and Elastic Modulus of Thermally Sprayed Thermal Barrier Coatings with Intra-splat Cracks

Article • Journal of Thermal Spray Technology, September 2015, Springer Science + Business Media

Professor Chang-Jiu Li
Microstructure and Properties of Porous Abradable Alumina Coatings Flame-Sprayed with Semi-molten Particles

Article • Journal of Thermal Spray Technology, September 2015, Springer Science + Business Media

Professor Chang-Jiu Li
Dominant Factors Influencing the Electrochemical Performance of Plasma-Sprayed LSGM Electrolyte

Article • ECS Transactions, July 2015, The Electrochemical Society

Professor Chang-Jiu Li
Epitaxial grain growth during 8YSZ splat formation on polycrystalline YSZ substrates by plasma spraying

Article • Surface and Coatings Technology, July 2015, Elsevier

Professor Chang-Jiu Li
A TEM Study of the Microstructure of Plasma-Sprayed YSZ Near Inter-splat Interfaces

Article • Journal of Thermal Spray Technology, June 2015, Springer Science + Business Media

Professor Chang-Jiu Li
Characterization of Plasma Jet in Plasma Spray-Physical Vapor Deposition of YSZ Using a <80 kW Shrouded Torch Based on Optical Emission Spectroscopy

Article • Journal of Thermal Spray Technology, May 2015, Springer Science + Business Media

Professor Chang-Jiu Li
Morphology and Size Evolution of Interlamellar Two-Dimensional Pores in Plasma-Sprayed La2Zr2O7 Coatings During Thermal Exposure at 1300 °C

Article • Journal of Thermal Spray Technology, April 2015, Springer Science + Business Media

Professor Chang-Jiu Li
Failure mechanism for flexible dye-sensitized solar cells under repeated outward bending: Cracking and spalling off of nano-porous titanium dioxide film

Article • Journal of Power Sources, April 2015, Elsevier

Professor Chang-Jiu Li
Propagation feature of cracks in plasma-sprayed YSZ coatings under gradient thermal cycling

Article • Ceramics International, April 2015, Elsevier

Professor Chang-Jiu Li
Microstructure of YSZ Coatings Deposited by PS-PVD Using 45 kW Shrouded Plasma Torch

Article • Materials and Manufacturing Processes, March 2015, Taylor & Francis

Professor Chang-Jiu Li
Mechanical property and wear performance dependence on processing condition for cold-sprayed WC-(nanoWC-Co)

Article • Applied Surface Science, March 2015, Elsevier

Professor Chang-Jiu Li
Ceramic Nano-particle/Substrate Interface Bonding Formation Derived from Dynamic Mechanical Force at Room Temperature: HRTEM Examination

Article • Journal of Thermal Spray Technology, February 2015, Springer Science + Business Media

Professor Chang-Jiu Li
Healing of the Interface Between Splashed Particles and Underlying Bulk Coating and Its Influence on Isothermal Oxidation Behavior of LPPS MCrAlY Bond Coat

Article • Journal of Thermal Spray Technology, February 2015, Springer Science + Business Media

Professor Chang-Jiu Li
Atmospheric plasma-sprayed La0.8Sr0.2Ga0.8Mg0.2O3 electrolyte membranes for intermediate-temperature solid oxide fuel cells

Article • Journal of Materials Chemistry A, January 2015, Royal Society of Chemistry

Meilin Liu, Professor Chang-Jiu Li
Behavioral study of flexible platinum counter electrodes under alternative bending conditions

Article • RSC Advances, January 2015, Royal Society of Chemistry

Professor Chang-Jiu Li
Unexpected efficiency enhancement of flexible dye-sensitized solar cells by repeated outward bending

Article • RSC Advances, January 2015, Royal Society of Chemistry

Professor Chang-Jiu Li
Controlling grain size in columnar YSZ coating formation by droplet filtering assisted PS-PVD processing

Article • RSC Advances, January 2015, Royal Society of Chemistry

Meilin Liu, Professor Chang-Jiu Li
Chemical compatibility and properties of suspension plasma-sprayed SrTiO3-based anodes for intermediate-temperature solid oxide fuel cells

Article • Journal of Power Sources, October 2014, Elsevier

Professor Chang-Jiu Li
Fabrication of Porous Stainless Steel by Flame Spraying of Semimolten Particles

Article • Materials and Manufacturing Processes, September 2014, Taylor & Francis

Professor Chang-Jiu Li
High velocity impact induced microstructure evolution during deposition of cold spray coatings: A review

Article • Surface and Coatings Technology, September 2014, Elsevier

Professor Chang-Jiu Li
WC-Co Composite Coating Deposited by Cold Spraying of a Core-Shell-Structured WC-Co Powder

Article • Journal of Thermal Spray Technology, August 2014, Springer Science + Business Media

Professor Chang-Jiu Li
Deposition mechanism of convex YSZ particles and effect of electrolyte/cathode interface structure on cathode performance of solid oxide fuel cell

Article • International Journal of Hydrogen Energy, August 2014, Elsevier

Professor Chang-Jiu Li
Effect of intersplat interface bonding on the microstructure of plasma-sprayed Al2O3 coating

Article • IOP Conference Series Materials Science and Engineering, August 2014, Institute of Physics Publishing

Professor Chang-Jiu Li
Evolution of microstructure during annealing of Mn1.5Co1.5O4 spinel coatings deposited by atmospheric plasma spray

Article • International Journal of Hydrogen Energy, August 2014, Elsevier

Professor Chang-Jiu Li
Splat interface bonding formation during plasma spraying of LZO coating

Article • Materials Research Innovations, July 2014, Taylor & Francis

Professor Chang-Jiu Li
Deposition Behavior of Semi-Molten Spray Particles During Flame Spraying of Porous Metal Alloy

Article • Journal of Thermal Spray Technology, June 2014, Springer Science + Business Media

Professor Chang-Jiu Li
Nano-Porous TiO2 Layer Using Ultrafine Nano-Particles for the Blocking Layer in Dye-Sensitized Solar Cells

Article • Journal of Nanoscience and Nanotechnology, April 2014, American Scientific Publishers

Professor Chang-Jiu Li
Room temperature cold sprayed TiO2 scattering layer for high performance and bending resistant plastic-based dye-sensitized solar cells

Article • Journal of Power Sources, April 2014, Elsevier

Professor Chang-Jiu Li
Microstructure, Mechanical Properties, and Two-Body Abrasive Wear Behavior of Cold-Sprayed 20 vol.% Cubic BN-NiCrAl Nanocomposite Coating

Article • Journal of Thermal Spray Technology, March 2014, Springer Science + Business Media

Professor Chang-Jiu Li
Effect of TGO Thickness on Thermal Cyclic Lifetime and Failure Mode of Plasma-Sprayed TBCs

Article • Journal of the American Ceramic Society, March 2014, Wiley

Professor Chang-Jiu Li
Plasma-Sprayed Y2O3-Stabilized ZrO2 Electrolyte With Improved Interlamellar Bonding for Direct Application to Solid Oxide Fuel Cells

Article • Journal of Fuel Cell Science and Technology, January 2014, ASME International

Professor Chang-Jiu Li
Influence of accelerating gas flow rate on the particle cohesion in room temperature cold sprayed scattering layer for plastic-based dye-sensitized solar cells

Article • Applied Surface Science, January 2014, Elsevier

Professor Chang-Jiu Li
Editorial

Article • Journal of Thermal Spray Technology, November 2013, Springer Science + Business Media

Professor Chang-Jiu Li
Critical bonding temperature for the splat bonding formation during plasma spraying of ceramic materials

Article • Surface and Coatings Technology, November 2013, Elsevier

Professor Chang-Jiu Li
Determination of Oxygen Content in Pervoskite-Type Cathode Coatings

Article • Key Engineering Materials, November 2013, Trans Tech Publications

Professor Chang-Jiu Li
Modeling Thermal Conductivity of Thermally Sprayed Coatings with Intrasplat Cracks

Article • Journal of Thermal Spray Technology, October 2013, Springer Science + Business Media

Professor Chang-Jiu Li
Microstructural and Mechanical Property Evolutions of Plasma-Sprayed YSZ Coating During High-Temperature Exposure: Comparison Study Between 8YSZ and 20YSZ

Article • Journal of Thermal Spray Technology, September 2013, Springer Science + Business Media

Professor Chang-Jiu Li
The influence of zirconium carbide addition on oxidation behaviour of NiAl coatings prepared by cold spraying of ball-milled Ni–Al alloy powder

Article • Materials Science and Technology, September 2013, Taylor & Francis

Professor Chang-Jiu Li
Evolution of Lamellar Interface Cracks During Isothermal Cyclic Test of Plasma-Sprayed 8YSZ Coating with a Columnar-Structured YSZ Interlayer

Article • Journal of Thermal Spray Technology, August 2013, Springer Science + Business Media

Professor Chang-Jiu Li
Effect of TiC addition and high-temperature annealing on the microstructure and electrical conductivity of shrouded-plasma-sprayed FeAl/TiC composites for SOFC support

Article • Journal of Power Sources, July 2013, Elsevier

Professor Chang-Jiu Li
Relationships between feedstock structure, particle parameter, coating deposition, microstructure and properties for thermally sprayed conventional and nanostructured WC–Co

Article • International Journal of Refractory Metals and Hard Materials, July 2013, Elsevier

Professor Chang-Jiu Li
Preparation of Aluminum Coatings by Atmospheric Plasma Spraying and Dry-Ice Blasting and Their Corrosion Behavior

Article • Journal of Thermal Spray Technology, June 2013, Springer Science + Business Media

Professor Chang-Jiu Li
Scandia-stabilized zirconia electrolyte with improved interlamellar bonding by high-velocity plasma spraying for high performance solid oxide fuel cells

Article • Journal of Power Sources, June 2013, Elsevier

Professor Chang-Jiu Li
Effect of Gas Pressure on Polarization of SOFC Cathode Prepared by Plasma Spray

Article • Journal of Thermal Spray Technology, March 2013, Springer Science + Business Media

Professor Chang-Jiu Li
Photovoltaic performance degradation and recovery of the flexible dye-sensitized solar cells by bending and relaxing

Article • Journal of Power Sources, March 2013, Elsevier

Professor Chang-Jiu Li
Editorial

Article • Journal of Thermal Spray Technology, February 2013, Springer Science + Business Media

Professor Chang-Jiu Li
Correlations between milling conditions and iron contamination, microstructure and hardness of mechanically alloyed cubic BN particle reinforced NiCrAl matrix composite powders

Article • Journal of Alloys and Compounds, January 2013, Elsevier

Professor Chang-Jiu Li
Synergistic effects of high temperature and impact compaction on the nano-TiO2 film for the significant improvement of photovoltaic performance of flexible dye-sensitized solar cells

Article • Electrochimica Acta, January 2013, Elsevier

Professor Chang-Jiu Li
Microstructure and Properties of Porous Ni50Cr50-Al2O3 Cermet Support for Solid Oxide Fuel Cells

Article • Journal of Thermal Spray Technology, December 2012, Springer Science + Business Media

Professor Chang-Jiu Li
Development of Particle Interface Bonding in Thermal Spray Coatings: A Review

Article • Journal of Thermal Spray Technology, December 2012, Springer Science + Business Media

Professor Chang-Jiu Li
Epitaxial Grain Growth During Splat Cooling of Alumina Droplets Produced by Atmospheric Plasma Spraying

Article • Journal of Thermal Spray Technology, December 2012, Springer Science + Business Media

Professor Chang-Jiu Li
Characterization of Nonmelted Particles and Molten Splats in Plasma-Sprayed Al2O3 Coatings by a Combination of Scanning Electron Microscopy, X-ray Diffraction Analysis, and Confocal Raman Analysis

Article • Journal of Thermal Spray Technology, December 2012, Springer Science + Business Media

Professor Chang-Jiu Li
Effect of Phase Transformation Mechanism on the Microstructure of Cold-sprayed Ni/Al-Al2O3 Composite Coatings during Post-spray Annealing Treatment

Article • Journal of Thermal Spray Technology, November 2012, Springer Science + Business Media

Professor Chang-Jiu Li
Improvement of Adhesion and Cohesion in Plasma-Sprayed Ceramic Coatings by Heterogeneous Modification of Nonbonded Lamellar Interface Using High Strength Adhesive Infiltration

Article • Journal of Thermal Spray Technology, November 2012, Springer Science + Business Media

Professor Chang-Jiu Li
Dual-scale oxide dispersoids reinforcement of Fe–40at.%Al intermetallic coating for both high hardness and high fracture toughness

Article • Materials Science and Engineering A, October 2012, Elsevier

Professor Chang-Jiu Li
Characterization of the microstructure and electrochemical behavior of Sm0.7Sr0.3Co3−δ cathode deposited by solution precursor plasma spraying

Article • International Journal of Hydrogen Energy, September 2012, Elsevier

Professor Chang-Jiu Li
Microstructure and polarization of La0.8Sr0.2MnO3 cathode deposited by alcohol solution precursor plasma spraying

Article • International Journal of Hydrogen Energy, September 2012, Elsevier

Professor Chang-Jiu Li
Microstructure, performance and stability of Ni/Al2O3 cermet-supported SOFC operating with coal-based syngas produced using supercritical water

Article • International Journal of Hydrogen Energy, September 2012, Elsevier

Professor Chang-Jiu Li
Fabrication of Porous Molybdenum by Controlling Spray Particle State

Article • Journal of Thermal Spray Technology, June 2012, Springer Science + Business Media

Professor Chang-Jiu Li
Simultaneous strengthening and toughening effects in WC–(nanoWC–Co)

Article • Scripta Materialia, May 2012, Elsevier

Professor Chang-Jiu Li
Editorial

Article • Journal of Thermal Spray Technology, April 2012, Springer Science + Business Media

Professor Chang-Jiu Li
A Novel Plasma-Sprayed Durable Thermal Barrier Coating with a Well-Bonded YSZ Interlayer Between Porous YSZ and Bond Coat

Article • Journal of Thermal Spray Technology, March 2012, Springer Science + Business Media

Professor Chang-Jiu Li
Effect of Dispersed TiC Content on the Microstructure and Thermal Expansion Behavior of Shrouded-Plasma-Sprayed FeAl/TiC Composite Coatings

Article • Journal of Thermal Spray Technology, March 2012, Springer Science + Business Media

Professor Chang-Jiu Li
Annealing Effect on the Intermetallic Compound Formation of Cold Sprayed Fe/Al Composite Coating

Article • Journal of Thermal Spray Technology, February 2012, Springer Science + Business Media

Professor Chang-Jiu Li
Electrical and mechanical properties of nano-structured TiN coatings deposited by vacuum cold spray

Article • Vacuum, February 2012, Elsevier

Professor Chang-Jiu Li
Preparation of cBNp/NiCrAl nanostructured composite powders by a step-fashion mechanical alloying process

Article • Powder Technology, February 2012, Elsevier

Professor Chang-Jiu Li
Isothermal Oxidation Behavior of NiCoCrAlTaY Coating Deposited by High Velocity Air-Fuel Spraying

Article • Journal of Thermal Spray Technology, January 2012, Springer Science + Business Media

Professor Chang-Jiu Li
Formation of Pore Structure and Its Influence on the Mass Transport Property of Vacuum Cold Sprayed TiO2 Coatings Using Strengthened Nanostructured Powder

Article • Journal of Thermal Spray Technology, January 2012, Springer Science + Business Media

Professor Chang-Jiu Li
XPS Analysis of SiC Films Prepared by Radio Frequency Plasma Sputtering

Article • Physics Procedia, January 2012, Elsevier

Professor Chang-Jiu Li
Thermal Stability of Microstructure and Hardness of Cold-Sprayed cBN/NiCrAl Nanocomposite Coating

Article • Journal of Thermal Spray Technology, December 2011, Springer Science + Business Media

Professor Chang-Jiu Li
Correlation between microstructure and property of electroless deposited Pt counter electrodes on plastic substrate for dye-sensitized solar cells

Article • Applied Surface Science, December 2011, Elsevier

Professor Chang-Jiu Li
Effect of Powder Size and Volume Fraction of WC on the Microstructure of Laser Cladding WC-NiCrBSi Composite Coatings

Article • Applied Mechanics and Materials, October 2011, Trans Tech Publications

Professor Chang-Jiu Li
High strain rate induced localized amorphization in cubic BN/NiCrAl nanocomposite through high velocity impact

Article • Scripta Materialia, October 2011, Elsevier

Professor Chang-Jiu Li
Effect of annealing on the microstructure and erosion performance of cold-sprayed FeAl intermetallic coatings

Article • Surface and Coatings Technology, September 2011, Elsevier

Professor Chang-Jiu Li
Interlamellar cracking of thermal barrier coatings with TGOs by non-standard four-point bending tests

Article • Materials Science and Engineering A, September 2011, Elsevier

Professor Chang-Jiu Li
Layer-by-Layer Fabrication of Multiple-Dye-Sensitized TiO2 Films for Dye-Sensitized Solar Cells by Vacuum Cold Spray

Article • Nanoscience and Nanotechnology Letters, August 2011, American Scientific Publishers

Professor Chang-Jiu Li
Multiple strengthening mechanisms of cold-sprayed cBNp/NiCrAl composite coating

Article • Surface and Coatings Technology, July 2011, Elsevier

Professor Chang-Jiu Li
Microstructure Features of Cold-Sprayed NiCoCrAlTaY Coating and its High Temperature Oxidation Behavior

Article • Materials Science Forum, June 2011, Trans Tech Publications

Professor Chang-Jiu Li
Influence of gas flow during vacuum cold spraying of nano-porous TiO2 film by using strengthened nanostructured powder on performance of dye-sensitized solar cell

Article • Thin Solid Films, May 2011, Elsevier

Professor Chang-Jiu Li
Improved Efficiency of over 10% in Dye-Sensitized Solar Cells with a Ruthenium Complex and an Organic Dye Heterogeneously Positioning on a Single TiO2 Electrode

Article • The Journal of Physical Chemistry C, March 2011, American Chemical Society (ACS)

Professor Chang-Jiu Li
Investigation on the Electrical Properties of Vacuum Cold Sprayed SiC-MoSi2 Coatings at Elevated Temperatures

Article • Journal of Thermal Spray Technology, March 2011, Springer Science + Business Media

Professor Chang-Jiu Li
Influence of pore structure on ion diffusion property in porous TiO2 coating and photovoltaic performance of dye-sensitized solar cells

Article • Surface and Coatings Technology, February 2011, Elsevier

Professor Chang-Jiu Li
Surface Engineering towards Green Manufacturing and Remanufacturing

Article • Journal of Mechanical Engineering, January 2011, Chinese Journal of Mechanical Engineering

Professor Chang-Jiu Li
Effect of impact-induced melting on interface microstructure and bonding of cold-sprayed zinc coating

Article • Applied Surface Science, December 2010, Elsevier

Professor Chang-Jiu Li
Thermal fatigue behavior of thermal barrier coatings with the MCrAlY bond coats by cold spraying and low-pressure plasma spraying

Article • Surface and Coatings Technology, December 2010, Elsevier

Professor Chang-Jiu Li
Effect of Chemical Compositions and Surface Morphologies of MCrAlY Coating on Its Isothermal Oxidation Behavior

Article • Journal of Thermal Spray Technology, November 2010, Springer Science + Business Media

Professor Chang-Jiu Li
Influence of Deposition Temperature on the Microstructures and Properties of Plasma-Sprayed Al2O3 Coatings

Article • Journal of Thermal Spray Technology, November 2010, Springer Science + Business Media

Professor Chang-Jiu Li
Editorial

Article • Journal of Thermal Spray Technology, November 2010, Springer Science + Business Media

Professor Chang-Jiu Li
Effect of self-propagating high-temperature combustion synthesis on the deposition of NiTi coating by cold spraying using mechanical alloying Ni/Ti powder

Article • Intermetallics, November 2010, Elsevier

Professor Chang-Jiu Li
Erratum to: Editorial

Article • Journal of Thermal Spray Technology, October 2010, Springer Science + Business Media

Professor Chang-Jiu Li
Editorial

Article • Journal of Thermal Spray Technology, October 2010, Springer Science + Business Media

Professor Chang-Jiu Li
Characterization of High-Temperature Abrasive Wear of Cold-Sprayed FeAl Intermetallic Compound Coating

Article • Journal of Thermal Spray Technology, September 2010, Springer Science + Business Media

Professor Chang-Jiu Li
Fracture toughness measurements of plasma-sprayed thermal barrier coatings using a modified four-point bending method

Article • Surface and Coatings Technology, September 2010, Elsevier

Professor Chang-Jiu Li
EFFECT OF POWDER STRUCTURE ON MICROSTRUCTURE OF THE OXIDE SCALES FORMED ON COLD-SPRAYEDNiCrAlYCOATINGS

Article • International Journal of Modern Physics B, June 2010, World Scientific Pub Co Pte Lt

Professor Chang-Jiu Li
RELATION BETWEEN MICROSTRUCTURE AND THERMAL CONDUCTIVITY OF PLASMA-SPRAYED 8YSZ COATING

Article • International Journal of Modern Physics B, June 2010, World Scientific Pub Co Pte Lt

Professor Chang-Jiu Li
Characterization of microstructure and properties of nanostructured Fe-Al/WC intermetallic composite coating deposited by cold spraying

Article • June 2010, Institute of Electrical & Electronics Engineers (IEEE)

Professor Chang-Jiu Li
Model of the abrasive wear of HVOF deposited Cr3C2-NiCr coating

Article • June 2010, Institute of Electrical & Electronics Engineers (IEEE)

Professor Chang-Jiu Li
Significant influence of particle surface oxidation on deposition efficiency, interface microstructure and adhesive strength of cold-sprayed copper coatings

Article • Applied Surface Science, June 2010, Elsevier

Professor Chang-Jiu Li
Effect of composition of NiO/YSZ anode on the polarization characteristics of SOFC fabricated by atmospheric plasma spraying

Article • International Journal of Hydrogen Energy, April 2010, Elsevier

Professor Chang-Jiu Li
Effect of microstructures on electrochemical behavior of La0.8Sr0.2MnO3 deposited by suspension plasma spraying

Article • International Journal of Hydrogen Energy, April 2010, Elsevier

Professor Chang-Jiu Li
Performance of a Ni/Al2O3 cermet-supported tubular solid oxide fuel cell operating with biomass-based syngas through supercritical water

Article • International Journal of Hydrogen Energy, April 2010, Elsevier

Professor Chang-Jiu Li
Characterization of cold-sprayed nanostructured Fe-based alloy

Article • Applied Surface Science, January 2010, Elsevier

Professor Chang-Jiu Li
Influence of Annealing on the Microstructure and Wear Performance of Diamond/NiCrAl Composite Coating Deposited through Cold Spraying

Article • Materials Science Forum, January 2010, Trans Tech Publications

Professor Chang-Jiu Li
Influence of substrate hardness transition on built-up of nanostructured WC–12Co by cold spraying

Article • Applied Surface Science, January 2010, Elsevier

Professor Chang-Jiu Li
Thermal spraying of light alloys

Article • January 2010, Elsevier

Professor Chang-Jiu Li
Editorial

Article • Journal of Thermal Spray Technology, December 2009, Springer Science + Business Media

Professor Chang-Jiu Li
Influence of Spray Materials and Their Surface Oxidation on the Critical Velocity in Cold Spraying

Article • Journal of Thermal Spray Technology, November 2009, Springer Science + Business Media

Professor Chang-Jiu Li
Effect of in-flight particle characteristics on the coating properties of atmospheric plasma-sprayed 8mol% Y2O3–ZrO2 electrolyte coating studying by artificial neural networks

Article • Surface and Coatings Technology, November 2009, Elsevier

Professor Chang-Jiu Li
Influence of TGO Composition on the Thermal Shock Lifetime of Thermal Barrier Coatings with Cold-sprayed MCrAlY Bond Coat

Article • Journal of Thermal Spray Technology, August 2009, Springer Science + Business Media

Professor Chang-Jiu Li
Microstructure and Electrochemical Behavior of a Structured Electrolyte/LSM-Cathode Interface Modified by Flame Spraying for Solid Oxide Fuel Cell Application

Article • Journal of Thermal Spray Technology, August 2009, Springer Science + Business Media

Professor Chang-Jiu Li
Microstructure, oxygen stoichiometry and electrical conductivity of flame-sprayed Sm0.7Sr0.3CoO3−δ

Article • Journal of Power Sources, June 2009, Elsevier

Professor Chang-Jiu Li
Modeling Aspects of High Velocity Impact of Particles in Cold Spraying by Explicit Finite Element Analysis

Article • Journal of Thermal Spray Technology, May 2009, Springer Science + Business Media

Professor Chang-Jiu Li
Development of a Ni/Al2O3 Cermet-Supported Tubular Solid Oxide Fuel Cell Assembled with Different Functional Layers by Atmospheric Plasma-Spraying

Article • Journal of Thermal Spray Technology, December 2008, Springer Science + Business Media

Professor Chang-Jiu Li
Cold spraying of Fe/Al powder mixture: Coating characteristics and influence of heat treatment on the phase structure

Article • Applied Surface Science, December 2008, Elsevier

Professor Chang-Jiu Li
Influence of Microstructure on the Ionic Conductivity of Plasma-Sprayed Yttria-Stabilized Zirconia Deposits

Article • Journal of the American Ceramic Society, December 2008, Wiley

Professor Chang-Jiu Li
Formation of NiAl Intermetallic Compound by Cold Spraying of Ball-Milled Ni/Al Alloy Powder Through Postannealing Treatment

Article • Journal of Thermal Spray Technology, November 2008, Springer Science + Business Media

Professor Chang-Jiu Li
Influence of Powder Porous Structure on the Deposition Behavior of Cold-Sprayed WC-12Co Coatings

Article • Journal of Thermal Spray Technology, November 2008, Springer Science + Business Media

Professor Chang-Jiu Li
Thermal Failure of Nanostructured Thermal Barrier Coatings with Cold-Sprayed Nanostructured NiCrAlY Bond Coat

Article • Journal of Thermal Spray Technology, November 2008, Springer Science + Business Media

Professor Chang-Jiu Li
Editorial

Article • Journal of Thermal Spray Technology, November 2008, Springer Science + Business Media

Professor Chang-Jiu Li
High-Temperature Erosion of HVOF Sprayed Cr3C2-NiCr Coating and Mild Steel for Boiler Tubes

Article • Journal of Thermal Spray Technology, October 2008, Springer Science + Business Media

Professor Chang-Jiu Li
Characterization of atmospheric plasma-sprayed La0.8Sr0.2Ga0.8Mg0.2O3 electrolyte

Article • Journal of Power Sources, October 2008, Elsevier

Professor Chang-Jiu Li
Microstructure development of plasma-sprayed yttria-stabilized zirconia and its effect on electrical conductivity

Article • Solid State Ionics, September 2008, Elsevier

Professor Chang-Jiu Li
Performance of tubular solid oxide fuel cell assembled with plasma-sprayed Sc2O3–ZrO2 electrolyte

Article • Solid State Ionics, September 2008, Elsevier

Professor Chang-Jiu Li
Effect of heat treatment on the microstructure and property of cold-sprayed nanostructured FeAl/Al2O3 intermetallic composite coating

Article • Vacuum, September 2008, Elsevier

Professor Chang-Jiu Li
Microwave sintering of plasma-sprayed yttria stabilized zirconia electrolyte coating

Article • Journal of the European Ceramic Society, September 2008, Elsevier

Professor Chang-Jiu Li
Study on gas permeation behaviour through atmospheric plasma-sprayed yttria stabilized zirconia coating

Article • Surface and Coatings Technology, July 2008, Elsevier

Professor Chang-Jiu Li
Low temperature deposition and characterization of TiO2 photocatalytic film through cold spray

Article • Applied Surface Science, April 2008, Elsevier

Professor Chang-Jiu Li
Origin of preferential orientation of rutile phase in thermally sprayed TiO2 coatings

Article • Materials Letters, April 2008, Elsevier

Professor Chang-Jiu Li
Study of oxidation behavior of nanostructured NiCrAlY bond coatings deposited by cold spraying

Article • Surface and Coatings Technology, April 2008, Elsevier

Professor Chang-Jiu Li
Effect of in-flight particle velocity on the performance of plasma-sprayed YSZ electrolyte coating for solid oxide fuel cells

Article • Surface and Coatings Technology, March 2008, Elsevier

Professor Chang-Jiu Li
Influence of Substrate Temperature on Microcracks Formation in Plasma-Sprayed Yttria-Stabilized Zirconia Splats

Article • Key Engineering Materials, March 2008, Trans Tech Publications

Professor Chang-Jiu Li
Cold spraying of Al–Sn binary alloy: Coating characteristics and particle bonding features

Article • Surface and Coatings Technology, February 2008, Elsevier

Professor Chang-Jiu Li
Effect of standoff distance on coating deposition characteristics in cold spraying

Article • Materials & Design (1980-2015), January 2008, Elsevier

Professor Chang-Jiu Li
Influence of through-lamella grain growth on ionic conductivity of plasma-sprayed yttria-stabilized zirconia as an electrolyte in solid oxide fuel cells

Article • Journal of Power Sources, January 2008, Elsevier

Professor Chang-Jiu Li
Microstructural Characterization of Cold-Sprayed Nanostructured FeAl Intermetallic Compound Coating and its Ball-Milled Feedstock Powders

Article • Journal of Thermal Spray Technology, November 2007, Springer Science + Business Media

Professor Chang-Jiu Li
Editorial

Article • Journal of Thermal Spray Technology, November 2007, Springer Science + Business Media

Professor Chang-Jiu Li
Dominant microstructural feature over photocatalytic activity of high velocity oxy-fuel sprayed TiO2 coating

Article • Surface and Coatings Technology, November 2007, Elsevier

Professor Chang-Jiu Li
Erosion Performance of HVOF-Sprayed Cr3C2-NiCr Coatings

Article • Journal of Thermal Spray Technology, November 2007, Springer Science + Business Media

Professor Chang-Jiu Li
Study on impact fusion at particle interfaces and its effect on coating microstructure in cold spraying

Article • Applied Surface Science, November 2007, Elsevier

Professor Chang-Jiu Li
Microstructure and Electrical Conductivity of Atmospheric Plasma-Sprayed LSM/YSZ Composite Cathode Materials

Article • Journal of Thermal Spray Technology, October 2007, Springer Science + Business Media

Professor Chang-Jiu Li
Characterization of Nanostructured WC-Co Deposited by Cold Spraying

Article • Journal of Thermal Spray Technology, October 2007, Springer Science + Business Media

Professor Chang-Jiu Li
Influence of Annealing on Photocatalytic Performance and Adhesion of Vacuum Cold-Sprayed Nanostructured TiO2 Coating

Article • Journal of Thermal Spray Technology, October 2007, Springer Science + Business Media

Professor Chang-Jiu Li
Influence of Silver Doping on Photocatalytic Activity of Liquid-Flame-Sprayed-Nanostructured TiO2 Coating

Article • Journal of Thermal Spray Technology, October 2007, Springer Science + Business Media

Professor Chang-Jiu Li
Microstructural Analysis and Photocatalytic Activity of Plasma-Sprayed Titania-Hydroxyapatite Coatings

Article • Journal of Thermal Spray Technology, October 2007, Springer Science + Business Media

Professor Chang-Jiu Li
Fabrication of Nano-TiO2 Coating for Dye-Sensitized Solar Cell by Vacuum Cold Spraying at Room Temperature

Article • Journal of Thermal Spray Technology, October 2007, Springer Science + Business Media

Professor Chang-Jiu Li
Effect of heat treatment on the microstructure and microhardness of cold-sprayed tin bronze coating

Article • Applied Surface Science, May 2007, Elsevier

Professor Chang-Jiu Li
Ti and Ti-6Al-4V Coatings by Cold Spraying and Microstructure Modification by Heat Treatment

Article • Advanced Engineering Materials, May 2007, Wiley

Professor Chang-Jiu Li
Numerical simulation of deformation behavior of Al particles impacting on Al substrate and effect of surface oxide films on interfacial bonding in cold spraying

Article • Applied Surface Science, March 2007, Elsevier

Professor Chang-Jiu Li
Ionic conductivity and its temperature dependence of atmospheric plasma-sprayed yttria stabilized zirconia electrolyte

Article • Materials Science and Engineering B, February 2007, Elsevier

Professor Chang-Jiu Li
Analysis on Rapid Cooling and Epitaxial Solidification of a Plasma-Sprayed Yttria Stabilized Zirconia Splat on a High-Temperature Substrate

Article • January 2007, ASME International

Professor Chang-Jiu Li
Significant influences of metal reactivity and oxide films at particle surfaces on coating microstructure in cold spraying

Article • Applied Surface Science, January 2007, Elsevier

Professor Chang-Jiu Li
Characterization of YSZ Solid Oxide Fuel Cells Electrolyte Deposited by Atmospheric Plasma Spraying and Low Pressure Plasma Spraying

Article • Journal of Thermal Spray Technology, December 2006, Springer Science + Business Media

Professor Chang-Jiu Li
Characterization of Microstructure of Nano-TiO2 Coating Deposited by Vacuum Cold Spraying

Article • Journal of Thermal Spray Technology, December 2006, Springer Science + Business Media

Professor Chang-Jiu Li
Effect of Cu2+ Doping on Photocatalytic Performance of Liquid Flame Sprayed TiO2 Coatings

Article • Journal of Thermal Spray Technology, December 2006, Springer Science + Business Media

Professor Chang-Jiu Li
Examination of Substrate Surface Melting-Induced Splashing During Splat Formation in Plasma Spraying

Article • Journal of Thermal Spray Technology, December 2006, Springer Science + Business Media

Professor Chang-Jiu Li
Measurement and Numerical Simulation of Particle Velocity in Cold Spraying

Article • Journal of Thermal Spray Technology, December 2006, Springer Science + Business Media

Professor Chang-Jiu Li
On high velocity impact of micro-sized metallic particles in cold spraying

Article • Applied Surface Science, December 2006, Elsevier

Professor Chang-Jiu Li
Optimal design of a convergent-barrel cold spray nozzle by numerical method

Article • Applied Surface Science, November 2006, Elsevier

Professor Chang-Jiu Li
Characterization of atmospheric plasma-sprayed Sc2O3–ZrO2 electrolyte coating

Article • Solid State Ionics, October 2006, Elsevier

Professor Chang-Jiu Li
Influence of YSZ electrolyte thickness on the characteristics of plasma-sprayed cermet supported tubular SOFC

Article • Solid State Ionics, October 2006, Elsevier

Professor Chang-Jiu Li
Influence of TiCl4 treatment on performance of dye-sensitized solar cell assembled with nano-TiO2 coating deposited by vacuum cold spraying

Article • Rare Metals, October 2006, Springer Science + Business Media

Professor Chang-Jiu Li
Influence of characteristics of stabilized zirconia electrolyte on performance of cermet supported tubular SOFCs

Article • Rare Metals, October 2006, Springer Science + Business Media

Professor Chang-Jiu Li
Tensile deformation behavior of plasma-sprayed Ni–45Cr coatings

Article • Surface and Coatings Technology, October 2006, Elsevier

Professor Chang-Jiu Li
Effect of powder structure on microstructure and electrical properties of plasma-sprayed 4.5mol% YSZ coating

Article • Vacuum, September 2006, Elsevier

Professor Chang-Jiu Li
Microstructural characterization and abrasive wear performance of HVOF sprayed Cr3C2–NiCr coating

Article • Surface and Coatings Technology, August 2006, Elsevier

Professor Chang-Jiu Li
Modification of microstructure and electrical conductivity of plasma-sprayed YSZ deposit through post-densification process

Article • Materials Science and Engineering A, July 2006, Elsevier

Professor Chang-Jiu Li
Effect of Annealing Treatment on the Microstructure and Properties of Cold-Sprayed Cu Coating

Article • Journal of Thermal Spray Technology, June 2006, Springer Science + Business Media

Professor Chang-Jiu Li
Examination of the Critical Velocity for Deposition of Particles in Cold Spraying

Article • Journal of Thermal Spray Technology, June 2006, Springer Science + Business Media

Professor Chang-Jiu Li
Relationship between particle erosion and lamellar microstructure for plasma-sprayed alumina coatings

Article • Wear, June 2006, Elsevier

Professor Chang-Jiu Li
Effects of surface conditions on the flattening behavior of plasma sprayed Cu splats

Article • Surface and Coatings Technology, May 2006, Elsevier

Professor Chang-Jiu Li
Examination of factors influencing the bond strength of high velocity oxy-fuel sprayed coatings

Article • Surface and Coatings Technology, February 2006, Elsevier

Professor Chang-Jiu Li
Characterization of the Microstructure and Electrical Conductivity of Plasma-Sprayed La0.5Sr0.5CoO3 Coating

Article • MATERIALS TRANSACTIONS, January 2006, Japan Institute of Metals

Professor Chang-Jiu Li
Deposition Behaviors of Solid Phases in Liquid-Solid Two-Phase Particles in High Velocity Oxy-Fuel Spraying

Article • MATERIALS TRANSACTIONS, January 2006, Japan Institute of Metals

Professor Chang-Jiu Li
Effect of Spray Distance on the Mechanical Properties of Plasma Sprayed Ni-45Cr Coatings

Article • MATERIALS TRANSACTIONS, January 2006, Japan Institute of Metals

Professor Chang-Jiu Li
Fracture Toughness of Plasma Spreaged YSZ coatings

Article • QUARTERLY JOURNAL OF THE JAPAN WELDING SOCIETY, January 2006, Japan Welding Society

Professor Chang-Jiu Li
Phase Formation during Deposition of TiO2 Coatings through High Velocity Oxy-Fuel Spraying

Article • MATERIALS TRANSACTIONS, January 2006, Japan Institute of Metals

Professor Chang-Jiu Li
Preliminary Study of Performance of Dye-Sensitized Solar Cell of Nano-TiO2 Coating Deposited by Vacuum Cold Spraying

Article • MATERIALS TRANSACTIONS, January 2006, Japan Institute of Metals

Professor Chang-Jiu Li
Phase Formation of Nano-TiO2 Particles during Flame Spraying with Liquid Feedstock

Article • Journal of Thermal Spray Technology, December 2005, Springer Science + Business Media

Professor Chang-Jiu Li
Photoresponse and Donor Concentration of Plasma-Sprayed TiO2 and TiO2-ZnO Electrodes

Article • Journal of Thermal Spray Technology, December 2005, Springer Science + Business Media

Professor Chang-Jiu Li
A theoretical model for prediction of deposition efficiency in cold spraying

Article • Thin Solid Films, October 2005, Elsevier

Professor Chang-Jiu Li
Optimal Design of a Novel Cold Spray Gun Nozzle at a Limited Space

Article • Journal of Thermal Spray Technology, September 2005, Springer Science + Business Media

Professor Chang-Jiu Li
Effect of spray parameters on the electrical conductivity of plasma-sprayed La1−xSrxMnO3 coating for the cathode of SOFCs

Article • Surface and Coatings Technology, August 2005, Elsevier

Professor Chang-Jiu Li
Formation of metastable phases in cold-sprayed soft metallic deposit

Article • Surface and Coatings Technology, August 2005, Elsevier

Professor Chang-Jiu Li
Influence of substrate roughness on the bonding mechanisms of high velocity oxy-fuel sprayed coatings

Article • Thin Solid Films, August 2005, Elsevier

Professor Chang-Jiu Li
Experimental determination of the relationship between flattening degree and Reynolds number for spray molten droplets

Article • Surface and Coatings Technology, February 2005, Elsevier

Professor Chang-Jiu Li
Effect of densification processes on the properties of plasma-sprayed YSZ electrolyte coatings for solid oxide fuel cells

Article • Surface and Coatings Technology, January 2005, Elsevier

Professor Chang-Jiu Li
Microstructure and photocatalytic performance of high velocity oxy-fuel sprayed TiO2 coatings

Article • Thin Solid Films, November 2004, Elsevier

Professor Chang-Jiu Li
Quantitative characterization of lamellar microstructure of plasma-sprayed ceramic coatings through visualization of void distribution

Article • Materials Science and Engineering A, November 2004, Elsevier

Professor Chang-Jiu Li
Dependency of Fracture Toughness of Plasma Sprayed Al2 O3 Coatings on Lamellar Structure

Article • Journal of Thermal Spray Technology, September 2004, Springer Science + Business Media

Professor Chang-Jiu Li
Effect of nano-crystallization of high velocity oxy-fuel-sprayed amorphous NiCrBSi alloy on properties of the coatings

Article • Journal of Vacuum Science & Technology A Vacuum Surfaces and Films, September 2004, American Vacuum Society

Professor Chang-Jiu Li
Effect of solid carbide particle size on deposition behaviour, microstructure and wear performance of HVOF cermet coatings

Article • Materials Science and Technology, September 2004, Taylor & Francis

Professor Chang-Jiu Li
Microstructure and property of micro-plasma-sprayed Cu coating

Article • Materials Science and Engineering A, August 2004, Elsevier

Professor Chang-Jiu Li
Evaporated-gas-induced splashing model for splat formation during plasma spraying

Article • Surface and Coatings Technology, June 2004, Elsevier

Professor Chang-Jiu Li
New approach to enhance the photocatalytic activity of plasma sprayed TiO2 coatings using p-n junctions

Article • Surface and Coatings Technology, June 2004, Elsevier

Professor Chang-Jiu Li
Transient Contact Pressure During Flattening of Thermal Spray Droplet and Its Effect on Splat Formation

Article • Journal of Thermal Spray Technology, June 2004, Springer Science + Business Media

Professor Chang-Jiu Li
Effect of specimen geometry on fracture toughness measurement of plasma-sprayed ceramic coatings by the tapered double cantilever beam approach

Article • Vacuum, April 2004, Elsevier

Professor Chang-Jiu Li
Performance of YSZ electrolyte layer deposited by atmospheric plasma spraying for cermet-supported tubular SOFC

Article • Vacuum, April 2004, Elsevier

Professor Chang-Jiu Li
Effects of spray parameters on the microstructure and property of Al2O3 coatings sprayed by a low power plasma torch with a novel hollow cathode

Article • Thin Solid Films, March 2004, Elsevier

Professor Chang-Jiu Li
Effects of annealing treatment on microstructure and photocatalytic performance of nanostructured TiO[sub 2] coatings through flame spraying with liquid feedstocks

Article • Journal of Vacuum Science & Technology B Microelectronics Processing and Phenomena, January 2004, American Vacuum Society

Professor Chang-Jiu Li
Formation of p-n junction by plasma spraying technique to enhance the photocatalytic activity of TiO2

Article • Journal of Materials Science, January 2004, Springer Science + Business Media

Professor Chang-Jiu Li
Microstructure and property of Al2O3 coating microplasma-sprayed using a novel hollow cathode torch

Article • Materials Letters, January 2004, Elsevier

Professor Chang-Jiu Li
Measurement of Fracture Toughness of Plasma-Sprayed Al2O3Coatings Using a Tapered Double Cantilever Beam Method

Article • Journal of the American Ceramic Society, August 2003, Wiley

Professor Chang-Jiu Li
Deposition characteristics of titanium coating in cold spraying

Article • Surface and Coatings Technology, April 2003, Elsevier

Professor Chang-Jiu Li
Formation of nanostructured TiO2 by flame spraying with liquid feedstock

Article • Materials Letters, April 2003, Elsevier

Professor Chang-Jiu Li
Effect of Spray Particle Trajectory on the Measurement Signal of Particle Parameters Based on Thermal Radiation

Article • Journal of Thermal Spray Technology, March 2003, Springer Science + Business Media

Professor Chang-Jiu Li
Addenda

Article • Journal of Thermal Spray Technology, March 2003, Springer Science + Business Media

Professor Chang-Jiu Li
Effect of sprayed powder particle size on the oxidation behavior of MCrAlY materials during high velocity oxygen-fuel deposition

Article • Surface and Coatings Technology, January 2003, Elsevier

Professor Chang-Jiu Li
Article • Journal of Materials Science Letters, January 2003, Springer Science + Business Media

Professor Chang-Jiu Li
Relation Between Microstructure and Properties of HVOF Sprayed Cr3C2-NiCr Cermet Coatings.

Article • QUARTERLY JOURNAL OF THE JAPAN WELDING SOCIETY, January 2003, Japan Welding Society

Professor Chang-Jiu Li
Effect of Particle State on the Adhesive Strength of HVOF Sprayed Metallic Coating

Article • Journal of Thermal Spray Technology, December 2002, Springer Science + Business Media

Professor Chang-Jiu Li
Dominant effect of carbide rebounding on the carbon loss during high velocity oxy-fuel spraying of Cr3C2–NiCr

Article • Thin Solid Films, November 2002, Elsevier

Professor Chang-Jiu Li
Relationships Between the Microstructure and Properties of Thermally Sprayed Deposits

Article • Journal of Thermal Spray Technology, September 2002, Springer Science + Business Media

Professor Chang-Jiu Li
Effect of types of ceramic materials in aggregated powder on the adhesive strength of high velocity oxy-fuel sprayed cermet coatings

Article • Surface and Coatings Technology, August 2001, Elsevier

Professor Chang-Jiu Li
Effect of Spray Conditions on the Properties of HVOF Sprayed Cr3C2-NiCr Coatings.

Article • QUARTERLY JOURNAL OF THE JAPAN WELDING SOCIETY, January 1998, Japan Welding Society

Professor Chang-Jiu Li
The lamellar structure of a detonation gun sprayed Al2O3 coating

Article • Surface and Coatings Technology, August 1996, Elsevier

Professor Chang-Jiu Li
Quantitative characterization of the structure of plasma-sprayed Al2O3 coating by using copper electroplating

Article • Thin Solid Films, June 1991, Elsevier

Professor Chang-Jiu Li
Electrochemical method to evaluate the connected porosity in ceramic coatings

Article • Thin Solid Films, January 1988, Elsevier

Professor Chang-Jiu Li

Search Kudos

Main menu

Discover

Subjects on Kudos

Services and resources

Admin

All Stories