All Stories

  1. A 10-Year Follow-Up of Different Intra-Radicular Retainers in Teeth Restored with Zirconia Crowns

    Article • Clinical Cosmetic and Investigational Dentistry, December 2019, Taylor & Francis

    Professor Mutlu Özcan

  2. Effect of surface conditioning methods on the microtensile bond strength of repair composite to indirect restorative materials

    Article • Journal of Adhesion Science and Technology, July 2019, Taylor & Francis

    Professor Mutlu Özcan

  3. Effect of temporary cement removal methods from human dentin on zirconia-dentin adhesion

    Article • Journal of Adhesion Science and Technology, June 2019, Taylor & Francis

    Professor Mutlu Özcan

  4. An investigation of atomic force microscopy, surface topography and adhesion of luting cements to zirconia: effect of silica coating, zirconia primer and laser

    Article • Journal of Adhesion Science and Technology, June 2019, Taylor & Francis

    Nadin Al-Haj Husain, Professor Mutlu Özcan

  5. Effect of different air-abrasion protocols on topography, surface wettability and adhesion of MDP monomer-based resin cement to zirconia

    Article • Journal of Adhesion Science and Technology, May 2019, Taylor & Francis

    Professor Mutlu Özcan, Nadin Al-Haj Husain, Ronaldo Carvalho

  6. Adhesion potential of relining materials to polyamide and PMMA-based denture base materials: effect of surface conditioning methods

    Article • Journal of Adhesion Science and Technology, May 2019, Taylor & Francis

    Nadin Al-Haj Husain, Professor Mutlu Özcan

  7. Effects of chemical and physico-chemical surface conditioning methods on the adhesion of resin composite to different mineral trioxide aggregate based cements

    Article • Journal of Adhesion Science and Technology, May 2019, Taylor & Francis

    Professor Mutlu Özcan

  8. Fatigue and fracture resistance of minimally invasive ceramic and resin composite veneers with different designs bonded adhesively to severely eroded teeth

    Article • Journal of Adhesion Science and Technology, May 2019, Taylor & Francis

    Professor Mutlu Özcan

  9. Adhesion of resin cements to contaminated zirconia resin cements on zirconia: effect saliva-contamination and surface conditioning

    Article • Journal of Adhesion Science and Technology, April 2019, Taylor & Francis

    Professor Mutlu Özcan

  10. Adhesion of bulk-fill resin composites as core and intraradicular post materials only versus the use of glass-fiber posts in different regions of root dentin

    Article • Journal of Adhesion Science and Technology, April 2019, Taylor & Francis

    Professor Mutlu Özcan

  11. Adhesion of resin cement to contemporary hybrid ceramic and polymeric CAD/CAM materials: effect of conditioning methods and ageing

    Article • Journal of Adhesion Science and Technology, February 2019, Taylor & Francis

    Professor Mutlu Özcan

  12. A review on potential toxicity of dental material and screening their biocompatibility

    Article • Toxicology Mechanisms and Methods, January 2019, Taylor & Francis

    Professor Mutlu Özcan, Dr Aziz Eftekhari

  13. EDITORIAL

    Article • Journal of Adhesion Science and Technology, January 2019, Taylor & Francis

    Professor Mutlu Özcan

  14. Fiber-Reinforced Composites for Dental Applications

    Article • BioMed Research International, November 2018, Hindawi Publishing Corporation

    Professor Mutlu Özcan, Andrea Scribante

  15. Adhesion of dual-polymerized luting cement on superficial and deep dentin using different one-step self-etch mild adhesive systems

    Article • Journal of Adhesion Science and Technology, October 2018, Taylor & Francis

    Professor Mutlu Özcan, Larissa Blarer

  16. Travel beyond Clinical Uses of Fiber Reinforced Composites (FRCs) in Dentistry: A Review of Past Employments, Present Applications, and Future Perspectives

    Article • BioMed Research International, October 2018, Hindawi Publishing Corporation

    Professor Mutlu Özcan, Andrea Scribante

  17. Zirconia ceramic fixed partial dentures after cyclic fatigue tests and clinical evaluation: a systematic review

    Article • Advances in Applied Ceramics Structural Functional and Bioceramics, September 2018, Taylor & Francis

    Professor Mutlu Özcan

  18. Intraoral repair of chipped or fractured veneered zirconia crowns and fixed dental prosthesis: clinical guidelines based on literature review

    Article • Journal of Adhesion Science and Technology, February 2018, Taylor & Francis

    Professor Mutlu Özcan

  19. Adhesion of resin composite to enamel and dentin: a methodological assessment

    Article • Journal of Adhesion Science and Technology, July 2017, Taylor & Francis

    Professor Mutlu Özcan

  20. Adhesion in numerous disciplines

    Article • Journal of Adhesion Science and Technology, December 2016, Taylor & Francis

    Professor Mutlu Özcan

  21. Effect of polishing instruments and polishing regimens on surface topography and phase transformation of monolithic zirconia: An evaluation with XPS and XRD analysis

    Article • Journal of the Mechanical Behavior of Biomedical Materials, December 2016, Elsevier

    Professor Mutlu Özcan, Nadin Al-Haj Husain

  22. Academy of Dental Materials guidance on in vitro testing of dental composite bonding effectiveness to dentin/enamel using micro-tensile bond strength (μTBS) approach

    Article • Dental Materials, December 2016, Elsevier

    Professor Mutlu Özcan

  23. Effect of Cyclic Fatigue Tests on Aging and Their Translational Implications for Survival of All-Ceramic Tooth-Borne Single Crowns and Fixed Dental Prostheses

    Article • Journal of Prosthodontics, November 2016, Wiley

    Professor Mutlu Özcan

  24. Adhesion to zirconia as a function of primers/silane coupling agents, luting cement types, aging and test methods

    Article • Journal of Adhesion Science and Technology, November 2016, Taylor & Francis

    Professor Mutlu Özcan

  25. Effect of clinical and laboratory contamination media on the adhesion of luting cement to direct and indirect resin composite materials

    Article • Journal of Adhesion Science and Technology, November 2016, Taylor & Francis

    Professor Mutlu Özcan

  26. Impression technique for a complete-arch prosthesis with multiple implants using additive manufacturing technologies

    Article • Journal of Prosthetic Dentistry, November 2016, Elsevier

    Professor Mutlu Özcan

  27. Fracture Strength, Failure Types, and Weibull Characteristics of Three-Unit Zirconia Fixed Dental Prostheses After Cyclic Loading: Effects of Veneering and Air-Abrasion Protocols

    Article • The International Journal of Periodontics & Restorative Dentistry, November 2016, Quintessence Publishing

    Professor Mutlu Özcan

  28. Effect of polishing procedures and hydrothermal aging on wear characteristics and phase transformation of zirconium dioxide

    Article • Journal of Prosthetic Dentistry, October 2016, Elsevier

    Professor Mutlu Özcan, Nadin Al-Haj Husain

  29. A clinical study on single-visit root canal retreatments on consecutive 173 patients: frequency of periapical complications and clinical success rate

    Article • Clinical Oral Investigations, September 2016, Springer Science + Business Media

    Professor Mutlu Özcan

  30. Randomized controlled within-subject evaluation of digital and conventional workflows for the fabrication of lithium disilicate single crowns. Part III: marginal and internal fit

    Article • Journal of Prosthetic Dentistry, September 2016, Elsevier

    Professor Mutlu Özcan

  31. Fracture strength of implant abutments after fatigue testing: A systematic review and a meta-analysis

    Article • Journal of the Mechanical Behavior of Biomedical Materials, September 2016, Elsevier

    Professor Mutlu Özcan

  32. Flexural strength of nano-hybrid resin composite as a function of light attenuation distance and specimen dimension

    Article • Journal of Adhesion Science and Technology, August 2016, Taylor & Francis

    Professor Mutlu Özcan

  33. Cement Thickness of Inlay Restorations Made of Lithium Disilicate, Polymer-Infiltrated Ceramic and Nano-Ceramic CAD/CAM Materials Evaluated Using 3D X-Ray Micro-Computed Tomography

    Article • Journal of Prosthodontics, August 2016, Wiley

    Dr Recep Uzgur, Professor Mutlu Özcan

  34. Immediate and delayed repair bond strength of a new ormocer resin restorative material as a function of mechanical and chemical surface conditioning methods

    Article • Journal of Adhesion Science and Technology, August 2016, Taylor & Francis

    Professor Mutlu Özcan

  35. Microleakage in class V cavities prepared using conventional method versus Er:YAG laser restored with glass ionomer cement or resin composite

    Article • Journal of Adhesion Science and Technology, August 2016, Taylor & Francis

    Professor Mutlu Özcan

  36. A comparative study on monomer elution and cytotoxicity of different adhesive restoration materials

    Article • Journal of Adhesion Science and Technology, August 2016, Taylor & Francis

    Professor Mutlu Özcan

  37. Adhesion of conventional and self-adhesive resin cements to indirect resin composite using different surface conditioning methods

    Article • Journal of Adhesion Science and Technology, July 2016, Taylor & Francis

    Professor Mutlu Özcan

  38. A Study on Topographical Properties and Surface Wettability of Monolithic Zirconia after Use of Diverse Polishing Instruments with Different Surface Coatings

    Article • Journal of Prosthodontics, July 2016, Wiley

    Professor Mutlu Özcan, Nadin Al-Haj Husain

  39. Survival Rate of Resin and Ceramic Inlays, Onlays, and Overlays

    Article • Journal of Dental Research, July 2016, SAGE Publications

    Professor Mutlu Özcan

  40. Adhesion of cast metal alloy and lithium disilicate copings luted to different core build-up materials with self-adhesive resin cement

    Article • Journal of Adhesion Science and Technology, July 2016, Taylor & Francis

    Professor Mutlu Özcan, Nadin Al-Haj Husain, Professor Ziad N. Al-Dwairi

  41. Compressive strength and failure types of cusp replacing direct resin composite restorations in previously amalgam-filled premolars versus sound teeth

    Article • Journal of Adhesion Science and Technology, July 2016, Taylor & Francis

    Professor Mutlu Özcan

  42. Finite element analysis on the optimal material choice and cavity design parameters for MOD inlays exposed to different force vectors and magnitudes

    Article • Journal of Adhesion Science and Technology, July 2016, Taylor & Francis

    Professor Mutlu Özcan

  43. Effect of shade and thermo-mechanical viscosity stimulation methods on the rheological properties of nanohybrid resin composite

    Article • Journal of Adhesion Science and Technology, July 2016, Taylor & Francis

    Professor Mutlu Özcan

  44. Effect of material and fabrication technique on marginal fit and fracture resistance of adhesively luted inlays made of CAD/CAM ceramics and hybrid materials

    Article • Journal of Adhesion Science and Technology, July 2016, Taylor & Francis

    Professor Mutlu Özcan

  45. Effect of surface conditioning methods, adhesive systems and resin composite on repair strength of dimethacrylate and silorane resin composites

    Article • Journal of Adhesion Science and Technology, June 2016, Taylor & Francis

    Professor Mutlu Özcan

  46. Monoclinic phase transformation and mechanical durability of zirconia ceramic after fatigue and autoclave aging

    Article • Journal of Biomedical Materials Research Part B Applied Biomaterials, June 2016, Wiley

    Professor Mutlu Özcan

  47. Comparison of methanol/hydrochloric, ferric chloride acid versus tribochemical silica coating for adhesion of resin cement to zirconium dioxide

    Article • Journal of Adhesion Science and Technology, June 2016, Taylor & Francis

    Professor Mutlu Özcan

  48. Effect of Different Abutments and Connections in Deformation Crestal Bone

    Article • Implant Dentistry, June 2016, Wolters Kluwer Health

    Professor Mutlu Özcan

  49. Artificial Aging of Zirconium Dioxide: An Evaluation of Current Knowledge and Clinical Relevance

    Article • Current Oral Health Reports, June 2016, Springer Science + Business Media

    Professor Mutlu Özcan

  50. Adhesion of orthodontic brackets to indirect laboratory-processed resin composite as a function of surface conditioning methods and artificial aging

    Article • Journal of Adhesion Science and Technology, May 2016, Taylor & Francis

    Professor Mutlu Özcan

  51. Analysis of structural, morphological alterations, wettability characteristics and adhesion to enamel after various surface conditioning methods

    Article • Journal of Adhesion Science and Technology, May 2016, Taylor & Francis

    Professor Mutlu Özcan

  52. Fracture strength, failure type and Weibull characteristics of lithium disilicate and multiphase resin composite endocrowns under axial and lateral forces

    Article • Dental Materials, May 2016, Elsevier

    Professor Mutlu Özcan

  53. Effect of Er,Cr:YSGG laser surface conditioning on the adhesion of fiber- reinforced composite and zirconia intraradicular posts to the root dentin

    Article • Journal of Adhesion Science and Technology, April 2016, Taylor & Francis

    Professor Mutlu Özcan

  54. Adhesive durability of bone cements containing gentamicin or gentamicin/clindamycin-based antibiotics on titanium used for oral implants

    Article • Journal of Adhesion Science and Technology, April 2016, Taylor & Francis

    Professor Mutlu Özcan

  55. Load-bearing capacity and failure types of premolars restored with sonic activated bulk-fill-, nano-hybrid and silorane-based resin restorative materials

    Article • Journal of Adhesion Science and Technology, April 2016, Taylor & Francis

    Professor Mutlu Özcan

  56. Reliability Analysis of Lithium Disilicate Crowns: Effectof Veneering and Milling Production Workflow

    Article • Journal of Prosthodontics, April 2016, Wiley

    Professor Mutlu Özcan

  57. Effect of immediate and delayed dentin sealing on the fracture strength, failure type and Weilbull characteristics of lithiumdisilicate laminate veneers

    Article • Dental Materials, April 2016, Elsevier

    Professor Mutlu Özcan

  58. Clinical performance of indirect composite onlays and overlays: 2-year follow up

    Article • Journal of Adhesion Science and Technology, March 2016, Taylor & Francis

    Professor Mutlu Özcan

  59. Adhesion of metal brackets to glassy matrix and hybrid CAD/CAM materials after different physico-chemical surface conditioning

    Article • Journal of Adhesion Science and Technology, March 2016, Taylor & Francis

    Professor Mutlu Özcan

  60. Micro-computerized tomography analysis of cement voids and pull-out strength of glass fiber posts luted with self-adhesive and glass-ionomer cements in the root canal

    Article • Journal of Adhesion Science and Technology, March 2016, Taylor & Francis

    Professor Mutlu Özcan

  61. An In Vitro Study of Factors Influencing the Performance of Digital Intraoral Impressions Operating on Active Wavefront Sampling Technology with Multiple Implants in the Edentulous Maxilla

    Article • Journal of Prosthodontics, March 2016, Wiley

    Professor Mutlu Özcan

  62. Long-term microleakage trends in access cavities conditioned with phosphoric acid and deproteinizing agent for root-canal-treated teeth: an investigation of fluid filtration and microscopy analysis

    Article • Journal of Adhesion Science and Technology, March 2016, Taylor & Francis

    Professor Mutlu Özcan

  63. Effect of the frequency of mechanical pulses for fatigue aging testing on push-out bond strength between glass fiber posts and root dentin

    Article • Journal of Adhesion Science and Technology, February 2016, Taylor & Francis

    Professor Mutlu Özcan

  64. Retentive strength of fiber-reinforced composite posts with composite resin cores: Effect of remaining coronal structure and root canal dentin conditioning protocols

    Article • Journal of Prosthetic Dentistry, December 2015, Elsevier

    Professor Mutlu Özcan

  65. Fracture Resistance of Molar Crowns Fabricated with Monolithic All-Ceramic CAD/CAM Materials Cemented on Titanium Abutments: An In Vitro Study

    Article • Journal of Prosthodontics, November 2015, Wiley

    Professor Mutlu Özcan

  66. Effect of timing for core preparation, luting cement type and root level on adhesion of fiber posts to intraradicular dentin

    Article • Journal of Adhesion Science and Technology, November 2015, Taylor & Francis

    Professor Mutlu Özcan

  67. Effects of different particle deposition parameters on adhesion of resin cement to zirconium dioxide and phase transformation

    Article • Journal of Adhesion Science and Technology, November 2015, Taylor & Francis

    Professor Mutlu Özcan

  68. Effect of aging type and aged unit on the repair strength of resin composite to feldspathic porcelain in testing microtensile bond strength

    Article • Journal of Adhesion Science and Technology, November 2015, Taylor & Francis

    Professor Mutlu Özcan

  69. Degree of conversion and adhesion of methacrylate-based resin cements with phosphonic or phosphoric acid acrylate to glass fiber posts at different regions of intraradicular dentin

    Article • Journal of Adhesion Science and Technology, October 2015, Taylor & Francis

    Professor Mutlu Özcan

  70. Evaluation of Different Thickness, Die Color, and Resin Cement Shade for Veneers of Multilayered CAD/CAM Blocks

    Article • Journal of Prosthodontics, October 2015, Wiley

    Professor Mutlu Özcan

  71. Could readily silanized silica particles substitute silica coating and silanization in conditioning zirconium dioxide for resin adhesion?

    Article • Journal of Adhesion Science and Technology, October 2015, Taylor & Francis

    Professor Mutlu Özcan

  72. Effect of polymerization protocol on the degree of conversion of photo- and dual-polymerized self-etch adhesives

    Article • Journal of Adhesion Science and Technology, October 2015, Taylor & Francis

    Professor Mutlu Özcan

  73. Effect of Jig Design and Assessment of Stress Distribution in Testing Metal-Ceramic Adhesion

    Article • Journal of Prosthodontics, October 2015, Wiley

    Professor Mutlu Özcan

  74. Accuracy of a Digital Impression System Based on Active Triangulation Technology With Blue Light for Implants

    Article • Implant Dentistry, October 2015, Wolters Kluwer Health

    Miss Beatriz Gimenez Gonzalez, Professor Mutlu Özcan

  75. Adhesion to Zirconium Dioxide Used for Dental Reconstructions: Surface Conditioning Concepts, Challenges, and Future Prospects

    Article • Current Oral Health Reports, September 2015, Springer Science + Business Media

    Professor Mutlu Özcan

  76. Chipping of Veneering Ceramics in Zirconium Dioxide Fixed Dental Prosthesis

    Article • Current Oral Health Reports, September 2015, Springer Science + Business Media

    Professor Mutlu Özcan

  77. Effect of mechanical and air-particle cleansing protocols of provisional cement on immediate dentin sealing layer and subsequent adhesion of resin composite cement

    Article • Journal of Adhesion Science and Technology, September 2015, Taylor & Francis

    Professor Mutlu Özcan

  78. Does 2% chlorhexidine digluconate cavity disinfectant or sodium fluoride/hydroxyethyl methacrylate affect adhesion of universal adhesive to dentin?

    Article • Journal of Adhesion Science and Technology, September 2015, Taylor & Francis

    Professor Mutlu Özcan

  79. Surface roughness of dental implants and treatment time using six different implantoplasty procedures

    Article • Clinical Oral Implants Research, September 2015, Wiley

    Professor Mutlu Özcan

  80. Fiber-matrix integrity, micromorphology and flexural strength of glass fiber posts: Evaluation of the impact of rotary instruments

    Article • Journal of the Mechanical Behavior of Biomedical Materials, August 2015, Elsevier

    Professor Mutlu Özcan

  81. A comparative study of biaxial flexural strength and Vickers microhardness of different zirconia materials: Effect of glazing and thermal cycling

    Article • Brazilian Dental Science, June 2015, Lepidus Tecnologia

    Professor Mutlu Özcan

  82. Clinical survival of indirect, anterior 3-unit surface-retained fibre-reinforced composite fixed dental prosthesis: Up to 7.5-years follow-up

    Article • Journal of Dentistry, June 2015, Elsevier

    Professor Mutlu Özcan

  83. A study of compressive strength between zirconia framework and veneering ceramic as a function of thermal expansion coefficient using Shell–Nielsen test method

    Article • Journal of Adhesion Science and Technology, May 2015, Taylor & Francis

    Professor Mutlu Özcan

  84. High-Performance Polymers and Their Potential Application as Medical and Oral Implant Materials

    Article • Implant Dentistry, May 2015, Wolters Kluwer Health

    Professor Mutlu Özcan

  85. Resin-bonded restorations: A strategy for managing anterior tooth loss in adolescence

    Article • Journal of Prosthetic Dentistry, April 2015, Elsevier

    Professor Mutlu Özcan

  86. Effect of 2% chlorhexidine gluconate cavity disinfectant on microtensile bond strength of tooth-coloured restorative materials to sound and caries-affected dentin

    Article • Journal of Adhesion Science and Technology, March 2015, Taylor & Francis

    Professor Mutlu Özcan

  87. Effect of Restorative, Endodontic, and Fatigue Treatments on the Cuspal Deflection of Maxillary Premolars Subjected to Different Cyclic Occlusal Forces: An In Vitro Study

    Article • The International Journal of Periodontics & Restorative Dentistry, March 2015, Quintessence Publishing

    Professor Mutlu Özcan

  88. Effect of air-abrasion regimens and fine diamond bur grinding on flexural strength, Weibull modulus and phase transformation of zirconium dioxide

    Article • Journal of Applied Biomaterials & Functional Materials, January 2015, Wichtig

    Professor Mutlu Özcan

  89. Adhesion to ceramics: Technical and clinical parameters

    Article • Oral Health and Dental Management, January 2015, OMICS Publishing Group

    Professor Mutlu Özcan

  90. Radiopacity measurements of direct and indirect resin composites at different thicknesses using digital image analysis

    Article • Dental Materials Journal, January 2015, Japanese Society for Dental Materials and Devices

    Professor Mutlu Özcan

  91. Accuracy of Two Digital Implant Impression Systems Based on Confocal Microscopy with Variations in Customized Software and Clinical Parameters

    Article • The International Journal of Oral & Maxillofacial Implants, January 2015, Quintessence Publishing

    Professor Mutlu Özcan

  92. Adhesive strength of self-adhesive resins to lithium disilicate ceramic and dentin: effect of dentin chelating agents

    Article • Odontology, November 2014, Springer Science + Business Media

    Professor Mutlu Özcan

  93. Clinical longevity of extensive direct composite restorations in amalgam replacement: Up to 3.5 years follow-up

    Article • Journal of Dentistry, November 2014, Elsevier

    Professor Mutlu Özcan

  94. Airborne Particle Abrasion of Zirconia Fixed Dental Prostheses

    Article • Journal of Esthetic and Restorative Dentistry, October 2014, Wiley

    Professor Mutlu Özcan

  95. Effect of Veneering Methods on Zirconia Framework-Veneer Ceramic Adhesion and Fracture Resistance of Single Crowns

    Article • Journal of Prosthodontics, October 2014, Wiley

    Professor Mutlu Özcan

  96. Durability and Weibull Characteristics of Lithium Disilicate Crowns Bonded on Abutments with Knife-Edge and Large Chamfer Finish Lines after Cyclic Loading

    Article • Journal of Prosthodontics, October 2014, Wiley

    Professor Mutlu Özcan

  97. Adhesive strength of metal brackets on existing composite, amalgam and restoration-enamel complex following air-abrasion protocols

    Article • International Journal of Adhesion and Adhesives, October 2014, Elsevier

    Professor Mutlu Özcan

  98. A microstrain comparison of passively fitting screw-retained and cemented titanium frameworks

    Article • Journal of Prosthetic Dentistry, October 2014, Elsevier

    Professor Mutlu Özcan

  99. Association between Oral Mucosal Lesions and Hygiene Habits in a Population of Removable Prosthesis Wearers

    Article • Journal of Prosthodontics, September 2014, Wiley

    Professor Mutlu Özcan

  100. Clinical Survival of Anterior Metal-Ceramic and All-Ceramic Cantilever Resin-Bonded Fixed Dental Prostheses over a Period of 60 Months

    Article • The International Journal of Prosthodontics, September 2014, Quintessence Publishing

    Professor Mutlu Özcan

  101. Clinical comparison of fiber-reinforced composite and stainless steel wire for splinting periodontally treated mobile teeth

    Article • Brazilian Dental Science, August 2014, Lepidus Tecnologia

    Professor Mutlu Özcan

  102. Effects of surface-finishing protocols on the roughness, color change, and translucency of different ceramic systems

    Article • Journal of Prosthetic Dentistry, August 2014, Elsevier

    Professor Mutlu Özcan

  103. Accuracy of a Digital Impression System Based on Parallel Confocal Laser Technology for Implants with Consideration of Operator Experience and Implant Angulation and Depth

    Article • The International Journal of Oral & Maxillofacial Implants, July 2014, Quintessence Publishing

    Miss Beatriz Gimenez Gonzalez, Professor Mutlu Özcan

  104. Effect of Different Cleaning Regimens on the Adhesion of Resin to Saliva-Contaminated Ceramics

    Article • Journal of Prosthodontics, June 2014, Wiley

    Professor Mutlu Özcan

  105. Using stereophotogrammetric technology for obtaining intraoral digital impressions of implants

    Article • The Journal of the American Dental Association, April 2014, Elsevier

    Miss Beatriz Gimenez Gonzalez, Professor Mutlu Özcan

  106. Comparison of Physicochemical Surface Conditioning Methods for Adhesion of bis-GMA Resin Cement to Particulate Filler Composite and Surface Characterization

    Article • The Journal of Adhesion, March 2014, Taylor & Francis

    Professor Mutlu Özcan

  107. Adhesion of substrate–adherent combinations for early composite repairs: Effect of intermediate adhesive resin application

    Article • International Journal of Adhesion and Adhesives, March 2014, Elsevier

    Professor Mutlu Özcan

  108. Publish or perish, publish and perish

    Article • Brazilian Dental Science, January 2014, Lepidus Tecnologia

    Professor Mutlu Özcan

  109. Effect of Various Veneering Techniques on Mechanical Strength of Computer-Controlled Zirconia Framework Designs

    Article • Journal of Prosthodontics, January 2014, Wiley

    Professor Mutlu Özcan

  110. Effects of simulated gastric juice on color stability, surface roughness and microhardness of laboratory-processed composites

    Article • Dental Materials Journal, January 2014, Japanese Society for Dental Materials and Devices

    Professor Mutlu Özcan

  111. Effect of Prophylactic Polishing Pastes on Roughness and Translucency of Lithium Disilicate Ceramic

    Article • The International Journal of Periodontics & Restorative Dentistry, January 2014, Quintessence Publishing

    Professor Mutlu Özcan

  112. Laboratory and Clinical Considerations on Prosthetic Zirconia Infrastructures for Implants

    Article • Implant Dentistry, December 2013, Wolters Kluwer Health

    Professor Mutlu Özcan

  113. Influence of air-particle deposition protocols on the surface topography and adhesion of resin cement to zirconia

    Article • Acta Odontologica Scandinavica, October 2013, Informa Healthcare

    Professor Mutlu Özcan

  114. Effect of colouring green stage zirconia on the adhesion of veneering ceramics with different thermal expansion coefficients

    Article • International Journal of Oral Science, October 2013, Nature

    Professor Mutlu Özcan

  115. Prosthodontic Considerations in the Implant-Supported All-Ceramic Restoration of Congenitally Missing Maxillary Lateral Incisor: A Clinical Report

    Article • Journal of Prosthodontics, October 2013, Wiley

    Professor Mutlu Özcan

  116. Air–particle abrasion on zirconia ceramic using different protocols: Effects on biaxial flexural strength after cyclic loading, phase transformation and surface topography

    Article • Journal of the Mechanical Behavior of Biomedical Materials, October 2013, Elsevier

    Professor Mutlu Özcan

  117. Influence of Different Maintenance Times of Torque Application on the Removal Torque Values to Loosen the Prosthetic Abutment Screws of External Hexagon Implants

    Article • Implant Dentistry, October 2013, Wolters Kluwer Health

    Professor Mutlu Özcan

  118. Si-based thin film coating on Y-TZP: Influence of deposition parameters on adhesion of resin cement

    Article • Applied Surface Science, October 2013, Elsevier

    Professor Mutlu Özcan, Argemiro Soares da Silva Sobrinho

  119. A modified surgical template with dual function

    Article • Journal of Prosthetic Dentistry, September 2013, Elsevier

    Professor Mutlu Özcan

  120. A Clinical Protocol for Intraoral Digital Impression of Screw-Retained CAD/CAM Framework on Multiple Implants Based on Wavefront Sampling Technology

    Article • Implant Dentistry, August 2013, Wolters Kluwer Health

    Miss Beatriz Gimenez Gonzalez, Professor Mutlu Özcan

  121. Accuracy of a Digital Impression System Based on Active Wavefront Sampling Technology for Implants Considering Operator Experience, Implant Angulation, and Depth

    Article • Clinical Implant Dentistry and Related Research, July 2013, Wiley

    Miss Beatriz Gimenez Gonzalez, Professor Mutlu Özcan

  122. Clinical Study on the Comparison of Masticatory Efficiency and Jaw Movement Before and After Temporomandibular Disorder Treatment

    Article • CRANIO®, July 2013, Maney Publishing

    Professor Mutlu Özcan

  123. Accuracy of Definitive Casts Using 4 Implant-Level Impression Techniques in a Scenario of Multi-Implant System With Different Implant Angulations and Subgingival Alignment Levels

    Article • Implant Dentistry, June 2013, Wolters Kluwer Health

    Professor Mutlu Özcan

  124. Implant-abutment gap versus microbial colonization: Clinical significance based on a literature review

    Article • Journal of Biomedical Materials Research Part B Applied Biomaterials, May 2013, Wiley

    Professor Mutlu Özcan

  125. Marginal quality of posterior microhybrid resin composite restorations applied using two polymerisation protocols: 5-year randomised split mouth trial

    Article • Journal of Dentistry, May 2013, Elsevier

    Professor Mutlu Özcan

  126. Two-body wear rate of CAD/CAM resin blocks and their enamel antagonists

    Article • Journal of Prosthetic Dentistry, May 2013, Elsevier

    Professor Mutlu Özcan

  127. Effect of Surface Modification on the Bond Strength between Zirconia and Resin Cement

    Article • Journal of Prosthodontics, April 2013, Wiley

    Professor Mutlu Özcan

  128. Effect of air-particle abrasion protocols on the biaxial flexural strength, surface characteristics and phase transformation of zirconia after cyclic loading

    Article • Journal of the Mechanical Behavior of Biomedical Materials, April 2013, Elsevier

    Professor Mutlu Özcan

  129. Bleaching induced tooth sensitivity: do the existing enamel craze lines increase sensitivity? A clinical study

    Article • Odontology, March 2013, Springer Science + Business Media

    Professor Mutlu Özcan

  130. Marginal Discrepancy of Monolithic and Veneered All-Ceramic Crowns on Titanium and Zirconia Implant Abutments Before and After Adhesive Cementation: A Scanning Electron Microscopy Analysis

    Article • The International Journal of Oral & Maxillofacial Implants, March 2013, Quintessence Publishing

    Professor Mutlu Özcan

  131. Effect of the Etching Duration and Ultrasonic Cleaning on Microtensile Bond Strength Between Feldspathic Ceramic and Resin Cement

    Article • The Journal of Adhesion, March 2013, Taylor & Francis

    Professor Mutlu Özcan

  132. Durability of Adhesion between Feldspathic Ceramic and Resin Cements: Effect of Adhesive Resin, Polymerization Mode of Resin Cement, and Aging

    Article • Journal of Prosthodontics, January 2013, Wiley

    Professor Mutlu Özcan

  133. Luting cements for dental applications

    Article • January 2013, Elsevier

    Professor Mutlu Özcan

  134. Peel strength of denture liner to PMMA and polyamide: laser versus air-abrasion

    Article • The Journal of Advanced Prosthodontics, January 2013, The Korean Academy of Prosthodontics (KAMJE)

    Professor Mutlu Özcan, BORA BAGIS

  135. Adhesion of 10-MDP containing resin cements to dentin with and without the etch-and-rinse technique

    Article • The Journal of Advanced Prosthodontics, January 2013, The Korean Academy of Prosthodontics (KAMJE)

    Professor Mutlu Özcan

  136. Micro-shear bond strength of adhesive resins to enamel at different relative humidity conditions

    Article • Dental Materials Journal, January 2013, Japanese Society for Dental Materials and Devices

    Professor Mutlu Özcan

  137. Fatigue resistance, debonding force, and failure type of fiber-reinforced composite, polyethylene ribbon-reinforced, and braided stainless steel wire lingual retainersin vitro

    Article • The Korean Journal of Orthodontics, January 2013, Korean Association of Orthodontists (KAMJE)

    Professor Mutlu Özcan

  138. Microleakage effect on class V composite restorations with two adhesive systems using different bleaching methods

    Article • Acta Odontologica Scandinavica, January 2013, Informa Healthcare

    Professor Mutlu Özcan

  139. Candida albicansadhesion on reinforced polymethylmethacrylate denture resin: effect of fibre architecture and exposure to saliva

    Article • Gerodontology, December 2012, Wiley

    Professor Mutlu Özcan

  140. Adhesion concepts in dentistry: tooth and material aspects

    Article • Journal of Adhesion Science and Technology, December 2012, Taylor & Francis

    Professor Mutlu Özcan

  141. Effect of delay in layering on the incremental adhesion of indirect dental composite resins

    Article • International Journal of Adhesion and Adhesives, December 2012, Elsevier

    Professor Mutlu Özcan

  142. Repair bond strength of microhybrid, nanohybrid and nanofilled resin composites: effect of substrate resin type, surface conditioning and ageing

    Article • Clinical Oral Investigations, October 2012, Springer Science + Business Media

    Professor Mutlu Özcan

  143. Randomized controlled split-mouth clinical trial of direct laminate veneers with two micro-hybrid resin composites

    Article • Journal of Dentistry, September 2012, Elsevier

    Professor Mutlu Özcan

  144. Titanium as a Reconstruction and Implant Material in Dentistry: Advantages and Pitfalls

    Article • Materials, August 2012, MDPI AG

    Professor Mutlu Özcan

  145. Load-bearing capacity of indirect inlay-retained fixed dental prostheses made of particulate filler composite alone or reinforced with E-glass fibers impregnated with various monomers

    Article • Journal of the Mechanical Behavior of Biomedical Materials, August 2012, Elsevier

    Professor Mutlu Özcan

  146. Radioactive potential of zirconium-dioxide used for dental applications

    Article • Journal of Applied Biomaterials & Functional Materials, July 2012, Wichtig

    Professor Mutlu Özcan

  147. Clinical longevity of ceramic laminate veneers bonded to teeth with and without existing composite restorations up to 40 months

    Article • Clinical Oral Investigations, July 2012, Springer Science + Business Media

    Professor Mutlu Özcan

  148. Impact of air-abrasion on fracture load and failure type of veneered anterior Y-TZP crowns before and after chewing simulation

    Article • Journal of Biomedical Materials Research Part B Applied Biomaterials, June 2012, Wiley

    Professor Mutlu Özcan

  149. Strain Gauge Analysis of the Effect of Porcelain Firing Simulation on the Prosthetic Misfit of Implant-Supported Frameworks

    Article • Implant Dentistry, June 2012, Wolters Kluwer Health

    Professor Mutlu Özcan

  150. Evaluation of flexural strength of hipped and presintered zirconia using different estimation methods of Weibull statistics

    Article • Journal of the Mechanical Behavior of Biomedical Materials, June 2012, Elsevier

    Professor Mutlu Özcan

  151. The fracture load and failure types of veneered anterior zirconia crowns: An analysis of normal and Weibull distribution of complete and censored data

    Article • Dental Materials, May 2012, Elsevier

    Professor Mutlu Özcan

  152. Bond Strengths of One-Step Self-Etch Adhesives to Laser-Irradiated and Bur-Cut Dentin After Water Storage and Thermocycling

    Article • Photomedicine and Laser Surgery, April 2012, Mary Ann Liebert Inc

    Professor Mutlu Özcan

  153. Repair of silorane composite—Using the same substrate or a methacrylate-based composite?

    Article • Dental Materials, March 2012, Elsevier

    Professor Mutlu Özcan

  154. Two-body wear of monolithic, veneered and glazed zirconia and their corresponding enamel antagonists

    Article • Acta Odontologica Scandinavica, February 2012, Informa Healthcare

    Professor Mutlu Özcan

  155. The effect of zirconia sintering temperature on flexural strength, grain size, and contrast ratio

    Article • Clinical Oral Investigations, February 2012, Springer Science + Business Media

    Professor Mutlu Özcan

  156. Surface characterization of feldspathic ceramic using ATR FT-IR and ellipsometry after various silanization protocols

    Article • Dental Materials, February 2012, Elsevier

    Professor Mutlu Özcan

  157. Effect of surface conditioning with airborne-particle abrasion on the tensile strength of polymeric CAD/CAM crowns luted with self-adhesive and conventional resin cements

    Article • Journal of Prosthetic Dentistry, February 2012, Elsevier

    Professor Mutlu Özcan

  158. Effect of Physicochemical Surface Treatments on the Bond Strength and Adhesion of Porcelain Denture Teeth to Heat-Polymerized Acrylic Resin Denture Base Material

    Article • The Journal of Adhesion, February 2012, Taylor & Francis

    Professor Mutlu Özcan

  159. Effect of seating forces on cement–ceramic adhesion in microtensile bond tests

    Article • Clinical Oral Investigations, January 2012, Springer Science + Business Media

    Professor Mutlu Özcan

  160. Load-bearing capacity of CAD/CAM milled polymeric three-unit fixed dental prostheses: Effect of aging regimens

    Article • Clinical Oral Investigations, January 2012, Springer Science + Business Media

    Professor Mutlu Özcan

  161. Radiopacity of different resin-based and conventional luting cements compared to human and bovine teeth

    Article • Dental Materials Journal, January 2012, Japanese Society for Dental Materials and Devices

    Professor Mutlu Özcan

  162. Fracture resistance of direct inlay-retained adhesive bridges: Effect of pontic material and occlusal morphology

    Article • Dental Materials Journal, January 2012, Japanese Society for Dental Materials and Devices

    Professor Mutlu Özcan

  163. Influence of powdered dentin on the shear bond strength of dentin bonding systems

    Article • Dental Materials Journal, January 2012, Japanese Society for Dental Materials and Devices

    Professor Mutlu Özcan

  164. The erosion kinetics of conventional and resin-modified glass-ionomer luting cements in acidic buffer solutions

    Article • Dental Materials Journal, January 2012, Japanese Society for Dental Materials and Devices

    Professor Mutlu Özcan

  165. Gender Difference in Prevalence of Signs and Symptoms of Temporomandibular Joint Disorders: A Retrospective Study on 243 Consecutive Patients

    Article • International Journal of Medical Sciences, January 2012, Ivyspring International Publisher

    Professor Mutlu Özcan, BORA BAGIS

  166. Pilot study of unidirectional E-glass fibre-reinforced composite resin splints: Up to 4.5-year clinical follow-up

    Article • Journal of Dentistry, December 2011, Elsevier

    Professor Mutlu Özcan

  167. The impact of in vitro aging on the mechanical and optical properties of indirect veneering composite resins

    Article • Journal of Prosthetic Dentistry, December 2011, Elsevier

    Professor Mutlu Özcan

  168. The influence of grain size on low-temperature degradation of dental zirconia

    Article • Journal of Biomedical Materials Research Part B Applied Biomaterials, November 2011, Wiley

    Renato Zenobi, Professor Mutlu Özcan

  169. Effect of denture adhesive on the micro-organisms in vivo

    Article • Gerodontology, November 2011, Wiley

    Professor Mutlu Özcan

  170. Possible hazardous effects of hydrofluoric acid and recommendations for treatment approach: a review

    Article • Clinical Oral Investigations, November 2011, Springer Science + Business Media

    Professor Mutlu Özcan

  171. Marginal and Internal Discrepancies Related to Margin Design of Ceramic Crowns Fabricated by a CAD/CAM System

    Article • Journal of Prosthodontics, November 2011, Wiley

    Professor Mutlu Özcan

  172. Load-bearing capacity and failure types of anterior zirconia crowns veneered with overpressing and layering techniques

    Article • Dental Materials, October 2011, Elsevier

    Professor Mutlu Özcan

  173. Adhesion of conventional and simplified resin-based luting cements to superficial and deep dentin

    Article • Clinical Oral Investigations, July 2011, Springer Science + Business Media

    Professor Mutlu Özcan

  174. Impact of Gluma Desensitizer on the tensile strength of zirconia crowns bonded to dentin: an in vitro study

    Article • Clinical Oral Investigations, February 2011, Springer Science + Business Media

    Professor Mutlu Özcan

  175. General health, dental status and perceived dental treatment needs of an elderly population in Istanbul

    Article • Gerodontology, February 2011, Wiley

    Professor Mutlu Özcan

  176. Early bond strength of two resin cements to Y-TZP ceramic using MPS or MPS/4-META silanes

    Article • Odontology, January 2011, Springer Science + Business Media

    Professor Mutlu Özcan

  177. Microhardness of dual-polymerized resin cement around a translucent fiber post in the intraradicular environment

    Article • Journal of Conservative Dentistry, January 2011, Medknow

    Professor Mutlu Özcan, BORA BAGIS

  178. Fracture load and failure analysis of zirconia single crowns veneered withpressed and layered ceramics after chewing simulation

    Article • Dental Materials Journal, January 2011, Japanese Society for Dental Materials and Devices

    Professor Mutlu Özcan

  179. Influence of silane heat treatment on bond strength of resin cement to a feldspathic ceramic

    Article • Dental Materials Journal, January 2011, Japanese Society for Dental Materials and Devices

    Professor Mutlu Özcan

  180. Fracture Strength and Failure Mode of Maxillary Implant-Supported Provisional Single Crowns: A Comparison of Composite Resin Crowns Fabricated Directly Over PEEK Abutments and Solid Titanium Abutments

    Article • Clinical Implant Dentistry and Related Research, December 2010, Wiley

    Professor Mutlu Özcan

  181. Assessment of Color Parameters of Composite Resin Shade Guides Using Digital Imaging versus Colorimeter

    Article • Journal of Esthetic and Restorative Dentistry, December 2010, Wiley

    Professor Mutlu Özcan, BORA BAGIS

  182. Editor's Comment and Q&A

    Article • American Journal of Orthodontics and Dentofacial Orthopedics, October 2010, Elsevier

    Professor Mutlu Özcan

  183. Loss of surface enamel after bracket debonding: An in-vivo and ex-vivo evaluation

    Article • American Journal of Orthodontics and Dentofacial Orthopedics, October 2010, Elsevier

    Professor Mutlu Özcan, BORA BAGIS

  184. Effect of silica coating combined to a MDP-based primer on the resin bond to Y-TZP ceramic

    Article • Journal of Biomedical Materials Research Part B Applied Biomaterials, August 2010, Wiley

    Professor Mutlu Özcan

  185. Bond Strength of Two Resin Cements on Dentin Using Different Cementation Strategies

    Article • Journal of Esthetic and Restorative Dentistry, August 2010, Wiley

    Professor Mutlu Özcan

  186. Effects of surface conditioning on repair bond strengths of non-aged and aged microhybrid, nanohybrid, and nanofilled composite resins

    Article • Clinical Oral Investigations, May 2010, Springer Science + Business Media

    Professor Mutlu Özcan

  187. In-vitro orthodontic bond strength testing: A systematic review and meta-analysis

    Article • American Journal of Orthodontics and Dentofacial Orthopedics, May 2010, Elsevier

    Professor Mutlu Özcan

  188. Opaque Layer Firing Temperature and Aging Effect on the Flexural Strength of Ceramic Fused to Cobalt-Chromium Alloy

    Article • Journal of Prosthodontics, April 2010, Wiley

    Professor Mutlu Özcan

  189. Effect of Surface Conditioning and Taper Angle on the Retention of IPS e.max Press Crowns

    Article • Journal of Prosthodontics, April 2010, Wiley

    Professor Mutlu Özcan

  190. Conversion Degree of Indirect Resin Composites and Effect of Thermocycling on Their Physical Properties

    Article • Journal of Prosthodontics, April 2010, Wiley

    Professor Mutlu Özcan

  191. Surface degradation of glass ceramics after exposure to acidulated phosphate fluoride

    Article • Journal of Applied Oral Science, April 2010, FapUNIFESP (SciELO)

    Professor Mutlu Özcan

  192. Comparative effects of two different artificial body fluids on Candida albicans adhesion to soft lining materials

    Article • Dental Materials Journal, January 2010, Japanese Society for Dental Materials and Devices

    Professor Mutlu Özcan

  193. Immediate repair bond strengths of microhybrid, nanohybrid and nanofilled composites after different surface treatments

    Article • Journal of Dentistry, January 2010, Elsevier

    Professor Mutlu Özcan

  194. Candida albicans adherence on silicone elastomers: Effect of polymerisation duration and exposure to simulated saliva and nasal secretion

    Article • Dental Materials, January 2010, Elsevier

    Professor Mutlu Özcan

  195. Effect of artificial aging regimens on the performance of self-etching adhesives

    Article • Journal of Biomedical Materials Research Part B Applied Biomaterials, January 2010, Wiley

    Professor Mutlu Özcan

  196. Bond strength durability of a resin composite on a reinforced ceramic using various repair systems

    Article • Dental Materials, December 2009, Elsevier

    Professor Mutlu Özcan

  197. Effect of composition, viscosity and thickness of the opaquer on the adhesion of resin composite to titanium

    Article • Dental Materials, October 2009, Elsevier

    Professor Mutlu Özcan

  198. Influence of fluoride- or triclosan-based desensitizing agents on adhesion of resin cements to dentin

    Article • Clinical Oral Investigations, August 2009, Springer Science + Business Media

    Professor Mutlu Özcan

  199. Could digital imaging be an alternative for digital colorimeters?

    Article • Clinical Oral Investigations, August 2009, Springer Science + Business Media

    Professor Mutlu Özcan, BORA BAGIS

  200. Editor's Summary and Q&A

    Article • American Journal of Orthodontics and Dentofacial Orthopedics, July 2009, Elsevier

    Professor Mutlu Özcan

  201. Effect of dental arch convexity and type of archwire on frictional forces

    Article • American Journal of Orthodontics and Dentofacial Orthopedics, July 2009, Elsevier

    Professor Mutlu Özcan

  202. Penetration of amalgam constituents into dentine

    Article • Journal of Dentistry, May 2009, Elsevier

    Professor Mutlu Özcan

  203. Evaluation of interface characterization and adhesion of glass ceramics to commercially pure titanium and gold alloy after thermal- and mechanical-loading

    Article • Dental Materials, February 2009, Elsevier

    Professor Mutlu Özcan

  204. Evaluation of bond strength of various margin ceramics to a zirconia ceramic

    Article • Journal of Dentistry, October 2008, Elsevier

    Professor Mutlu Özcan

  205. Fracture Strength of Direct Surface-retained Fixed Partial Dentures: Effect of Fiber Reinforcement versus the Use of Particulate Filler Composites Only

    Article • Dental Materials Journal, January 2008, Japanese Society for Dental Materials and Devices

    Professor Mutlu Özcan

  206. Mechanical and Thermal Cycling Effects on the Flexural Strength of Glass Ceramics Fused to Titanium

    Article • Dental Materials Journal, January 2008, Japanese Society for Dental Materials and Devices

    Professor Mutlu Özcan

  207. Effect of Various Surface Conditioning Methods on the Adhesion of Dual-cure Resin Cement with MDP Functional Monomer to Zirconia after Thermal Aging

    Article • Dental Materials Journal, January 2008, Japanese Society for Dental Materials and Devices

    Professor Mutlu Özcan

  208. Effect of testing methods on the bond strength of resin to zirconia-alumina ceramic: microtensile versus shear test

    Article • Dental Materials Journal, January 2008, Japanese Society for Dental Materials and Devices

    Professor Mutlu Özcan

  209. Effect of conditioning methods on the microtensile bond strength of phosphate monomer-based cement on zirconia ceramic in dry and aged conditions

    Article • Journal of Biomedical Materials Research Part B Applied Biomaterials, January 2008, Wiley

    Professor Mutlu Özcan

  210. Effect of the cross-linking silane concentration in a novel silane system on bonding resin-composite cement

    Article • Acta Odontologica Scandinavica, January 2008, Taylor & Francis

    Professor Mutlu Özcan

  211. Microtensile bond strength of a resin cement to feldpathic ceramic after different etching and silanization regimens in dry and aged conditions

    Article • Dental Materials, November 2007, Elsevier

    Professor Mutlu Özcan

  212. Comparison of resin cement adhesion to Y-TZP ceramic following manufacturers’ instructions of the cements only

    Article • Clinical Oral Investigations, September 2007, Springer Science + Business Media

    Professor Mutlu Özcan

  213. Fracture strength of direct versus indirect laminates with and without fiber application at the cementation interface

    Article • Dental Materials, August 2007, Elsevier

    Professor Mutlu Özcan

  214. To what extent does the longevity of fixed dental prostheses depend on the function of the cement? Working Group 4 materials: cementation

    Article • Clinical Oral Implants Research, June 2007, Wiley

    Professor Mutlu Özcan

  215. Comparison of two bond strength testing methodologies for bilayered all-ceramics

    Article • Dental Materials, May 2007, Elsevier

    Professor Mutlu Özcan

  216. An international multicenter study on the effectiveness of a denture adhesive in maxillary dentures using disposable gnathometers

    Article • Clinical Oral Investigations, March 2007, Springer Science + Business Media

    Professor Mutlu Özcan

  217. Adherence of Candida albicans to denture base acrylics and silicone-based resilient liner materials with different surface finishes

    Article • Clinical Oral Investigations, February 2007, Springer Science + Business Media

    Professor Mutlu Özcan

  218. Three-year treatment outcomes with three brands of implants placed in the posterior maxilla and mandible of partially edentulous patients

    Article • Journal of Prosthetic Dentistry, February 2007, Elsevier

    Professor Mutlu Özcan

  219. Effect of mechanical cycling on the flexural strength of densely sintered ceramics

    Article • Dental Materials, November 2006, Elsevier

    Professor Mutlu Özcan

  220. Comparison of Repair Methods for Ceramic-Fused-to-Metal Crowns

    Article • Journal of Prosthodontics, September 2006, Wiley

    Professor Mutlu Özcan

  221. Microtensile bond strength of a resin cement to glass infiltrated zirconia-reinforced ceramic: The effect of surface conditioning

    Article • Dental Materials, March 2006, Elsevier

    Professor Mutlu Özcan

  222. A Practical Method for Chairside Repair of Debonded Porcelain Denture Teeth

    Article • Journal of Prosthodontics, January 2006, Wiley

    Professor Mutlu Özcan

  223. Subjective Assessment by Patients of the Efficiency of Two Denture Adhesive Pastes

    Article • Journal of Prosthodontics, December 2005, Wiley

    Professor Mutlu Özcan

  224. The Effect of a New Denture Adhesive on Bite Force Until Denture Dislodgement

    Article • Journal of Prosthodontics, June 2005, Wiley

    Professor Mutlu Özcan

  225. The effect of box preparation on the strength of glass fiber–reinforced composite inlay-retained fixed partial dentures

    Article • Journal of Prosthetic Dentistry, April 2005, Elsevier

    Professor Mutlu Özcan

  226. The effect of a 3-methacryloxypropyltrimethoxysilane and vinyltriisopropoxysilane blend and tris(3-trimethoxysilylpropyl)isocyanurate on the shear bond strength of composite resin to titanium metal

    Article • Dental Materials, November 2004, Elsevier

    Professor Mutlu Özcan

  227. Bonding polycarbonate brackets to ceramic: Effects of substrate treatment on bond strength

    Article • American Journal of Orthodontics and Dentofacial Orthopedics, August 2004, Elsevier

    Professor Mutlu Özcan

  228. Effect of drying time of 3-methacryloxypropyltrimethoxysilane on the shear bond strength of a composite resin to silica-coated base/noble alloys

    Article • Dental Materials, July 2004, Elsevier

    Professor Mutlu Özcan

  229. Effect of alloy type and surface conditioning on roughness and bond strength of metal brackets

    Article • American Journal of Orthodontics and Dentofacial Orthopedics, January 2004, Elsevier

    Professor Mutlu Özcan

  230. Effect of surface conditioning methods on the bond strength of luting cement to ceramics

    Article • Dental Materials, December 2003, Elsevier

    Professor Mutlu Özcan

  231. Influence of various surface-conditioning methods on the bond strength of metal brackets to ceramic surfaces

    Article • American Journal of Orthodontics and Dentofacial Orthopedics, May 2003, Elsevier

    Professor Mutlu Özcan

  232. Influence of various surface-conditioning methods on the bond strength of metal brackets to ceramic surfaces

    Article • American Journal of Orthodontics and Dentofacial Orthopedics, May 2003, Elsevier

    Professor Mutlu Özcan

  233. Resistance of core materials against torsional forces on differently conditioned titanium posts

    Article • Journal of Prosthetic Dentistry, October 2002, Elsevier

    Professor Mutlu Özcan

  234. New approach to bonding all-ceramic adhesive fixed partial dentures: A clinical report

    Article • Journal of Prosthetic Dentistry, September 2002, Elsevier

    Professor Mutlu Özcan

  235. The use of chairside silica coating for different dental applications: A clinical report

    Article • Journal of Prosthetic Dentistry, May 2002, Elsevier

    Professor Mutlu Özcan

  236. Effect of early water contact on solubility of glass ionomer luting cements

    Article • Journal of Prosthetic Dentistry, October 1998, Elsevier

    Professor Mutlu Özcan