All Stories

  1. New Experimental Single-Axis Excitation Set-Up for Multi-Axial Random Fatigue Assessments

    Article • Machines, June 2025, MDPI AG

    Dr Roger SERRA

  2. Accuracy Improvement of Braking Force via Deceleration Feedback Functions Applied to Braking Systems

    Article • Sensors, June 2023, MDPI AG

    Dr Roger SERRA

  3. A two-stage approach for structural damage detection using a damage localization indicator vector and cluster particle swarm optimization

    Article • Engineering Optimization, May 2022, Taylor & Francis

    Dr Roger SERRA

  4. A multi-component PSO algorithm with leader learning mechanism for structural damage detection

    Article • Applied Soft Computing, February 2022, Elsevier

    Dr Roger SERRA

  5. Sensitivity and Efficiency of the Frequency Shift Coefficient Based on the Damage Identification Algorithm: Modeling Uncertainty on Natural Frequencies

    Article • Vibration, January 2022, MDPI AG

    Dr Roger SERRA

  6. Vibration Fatigue Damage Estimation by New Stress Correction Based on Kurtosis Control of Random Excitation Loadings

    Article • Sensors, July 2021, MDPI AG

    Dr Roger SERRA

  7. An Investigation of Particle Swarm Optimization Topologies in Structural Damage Detection

    Article • Applied Sciences, June 2021, MDPI AG

    Dr Roger SERRA

  8. Performance of Fitness Functions Based on Natural Frequencies in Defect Detection Using the Standard PSO-FEM Approach

    Article • Shock and Vibration, March 2021, Hindawi Publishing Corporation

    Dr Roger SERRA

  9. A Novel VBSHM Strategy to Identify Geometrical Damage Properties Using Only Frequency Changes and Damage Library

    Article • Applied Sciences, December 2020, MDPI AG

    Dr Roger SERRA

  10. An Analytic Approach to the Cox Proportional Hazards Model for Estimating the Lifespan of Cutting Tools

    Article • Journal of Manufacturing and Materials Processing, March 2020, MDPI AG

    Dr Roger SERRA

  11. NFLUENCE OF BOTH RAKE AND FLANK FACES METAL WORKING FLUID (MWF) STRATEGIES ON MACHINABILITY OF Ti-6Al-4V ALLOY

    Article • MM Science Journal, November 2019, MM Publishing, s.r.o.

    Dr Roger SERRA

  12. Experimental Modal Analysis of Hand–Arm Vibration in Golf: Influence of Grip Strength

    Article • Applied Sciences, May 2019, MDPI AG

    Dr Roger SERRA

  13. Linearity investigation from a vibratory fatigue bench

    Article • Mechanics & Industry, January 2019, EDP Sciences

    Dr Roger SERRA

  14. Adapted Locati method used for accelerated fatigue test under random vibrations

    Article • Procedia Structural Integrity, January 2019, Elsevier

    Dr Roger SERRA

  15. Based on the virtual experiment study of the impact of load sequence on the calculation process of random vibration fatigue damage.

    Article • Procedia Structural Integrity, January 2019, Elsevier

    Dr Roger SERRA

  16. Instrumentation for Mechanical Vibration Analysis

    Article • December 2018, Taylor & Francis

    Dr Roger SERRA

  17. Numerical and Experimental Assessment of Mechanical Vibrations

    Article • December 2018, Taylor & Francis

    Dr Roger SERRA

  18. Effects of microstructure of compacted graphite iron (CGI) in tribological strategy

    Article • Journal of Tribology, March 2018, ASME International

    Dr Roger SERRA

  19. Guest editorial

    Article • International Journal of Climate Change Strategies and Management, March 2018, Emerald

    Dr Roger SERRA

  20. Republished Paper. Numerical study for single and multiple damage detection and localization in beam-like structures using BAT algorithm

    Article • Journal of Vibroengineering, February 2018, JVE International Ltd.

    Dr Roger SERRA

  21. Variance analysis for model updating with a finite element based subspace fitting approach

    Article • Mechanical Systems and Signal Processing, July 2017, Elsevier

    Dr Roger SERRA

  22. Optimal milling conditions of aeronautical composite material under temperature, forces and vibration parameters

    Article • Journal of Composite Materials, January 2017, SAGE Publications

    Dr Roger SERRA

  23. Editorial: Special Issue on Experimental Vibration Analysis

    Article • Mechanics & Industry, January 2017, EDP Sciences

    Dr Roger SERRA

  24. Damage detection methodology on beam-like structures based on combined modal Wavelet Transform strategy

    Article • Mechanics & Industry, January 2017, EDP Sciences

    Dr Roger SERRA

  25. Tool design effect on microlubrication spray efficiency in milling using inner channels

    Article • Proceedings of the Institution of Mechanical Engineers Part B Journal of Engineering Manufacture, August 2016, SAGE Publications

    Dr Roger SERRA

  26. Experimental method to analyze the oil mist impingement over an insert used in MQL milling process

    Article • Measurement, May 2016, Elsevier

    Dr Roger SERRA

  27. Damage detection and localization in composite beam structures based on vibration analysis

    Article • Mechanika, January 2016, Publishing House Technologija

    Dr Roger SERRA

  28. An automatic system based on vibratory analysis for cutting tool wear monitoring

    Article • Measurement, January 2016, Elsevier

    Dr Roger SERRA

  29. Experimental Evaluation of Flank Wear in Dry Turning from Accelerometer Data

    Article • January 2016, International Institute of Acoustics and Vibration (IIAV)

    Dr Roger SERRA

  30. Estimate of Cutting Tool Lifespan through Cox Proportional Hazards Model

    Article • IFAC-PapersOnLine, January 2016, Elsevier

    Dr Roger SERRA

  31. Cutting tools reliability and residual life prediction from degradation indicators in turning process

    Article • The International Journal of Advanced Manufacturing Technology, December 2015, Springer Science + Business Media

    Dr Roger SERRA

  32. Numerical optimization of the Minimum Quantity Lubrication parameters by inner canalizations and cutting conditions for milling finishing process with Taguchi method

    Article • Journal of Cleaner Production, December 2015, Elsevier

    Dr Roger SERRA

  33. Numerical steady state prediction of spitting effect for different internal canalization geometries used in MQL machining strategy

    Article • Journal of Manufacturing Processes, October 2015, Elsevier

    Dr Roger SERRA

  34. New approach for robust multi-objective optimization of turning parameters using probabilistic genetic algorithm

    Article • The International Journal of Advanced Manufacturing Technology, August 2015, Springer Science + Business Media

    Dr Roger SERRA

  35. Genetic Algorithm Based Objective Functions Comparative Study for Damage Detection and Localization in Beam Structures

    Article • Journal of Physics Conference Series, July 2015, Institute of Physics Publishing

    Dr Roger SERRA

  36. Numerical modeling and experimental measurement of MQL impingement over an insert in a milling tool with inner channels

    Article • International Journal of Machine Tools and Manufacture, July 2015, Elsevier

    Dr Roger SERRA

  37. A finite element-based subspace fitting approach for structure identification and damage localization

    Article • Mechanical Systems and Signal Processing, June 2015, Elsevier

    Dr Roger SERRA

  38. Subspace-based damage identification of roller bearing

    Article • MATEC Web of Conferences, January 2015, EDP Sciences

    Dr Roger SERRA

  39. Preface

    Article • MATEC Web of Conferences, January 2015, EDP Sciences

    Dr Roger SERRA

  40. Bi-objective robust optimization of machined surface quality and productivity under vibrations limitation

    Article • MATEC Web of Conferences, January 2015, EDP Sciences

    Dr Roger SERRA

  41. Roller Bearing Monitoring by New Subspace-Based Damage Indicator

    Article • Shock and Vibration, January 2015, Hindawi Publishing Corporation

    Dr Roger SERRA

  42. Experimental Shock and Vibration Analysis

    Article • Shock and Vibration, January 2015, Hindawi Publishing Corporation

    Dr Roger SERRA

  43. Efficient genetic algorithm for multi-objective robust optimization of machining parameters with taking into account uncertainties

    Article • The International Journal of Advanced Manufacturing Technology, October 2014, Springer Science + Business Media

    Dr Roger SERRA

  44. Numerical study of the inner canalization geometry optimization in a milling tool used in micro quantity lubrication

    Article • Mechanics & Industry, January 2014, EDP Sciences

    Dr Roger SERRA

  45. Détermination des conditions d’usinage sans délaminage d’un matériau composite par analyse vibratoire

    Article • Revue des composites et des matériaux avancés, December 2013, Lavoisier

    Dr Roger SERRA

  46. Optimal milling conditions for carbon/epoxy composite material using damage and vibration analysis

    Article • The International Journal of Advanced Manufacturing Technology, April 2013, Springer Science + Business Media

    Dr Roger SERRA

  47. Guest editorial

    Article • Mechanics & Industry, January 2013, EDP Sciences

    Dr Roger SERRA

  48. Vibratory diagnosis by finite element model updating and operational modal analysis

    Article • Mechanics & Industry, January 2013, EDP Sciences

    Dr Roger SERRA

  49. Machining carbon fibre reinforced plastics: lead angle effect

    Article • International Journal of Machining and Machinability of Materials, January 2013, Inderscience Publishers

    Dr Roger SERRA

  50. Vibratory Analysis of Turning Process

    Article • Applied Mechanics and Materials, August 2011, Trans Tech Publications

    Dr Roger SERRA

  51. Detection process approach of tool wear in high speed milling

    Article • Measurement, December 2010, Elsevier

    Dr Roger SERRA

  52. Effects of cutting parameters during turning 100C6 steel

    Article • EPJ Web of Conferences, January 2010, EDP Sciences

    Dr Roger SERRA

  53. Dynamic characterization of the cutting conditions in dry turning

    Article • Journal of Physics Conference Series, August 2009, Institute of Physics Publishing

    Dr Roger SERRA

  54. Tool Wear Monitoring in Turning Processes Using Vibratory Analysis

    Article • January 2009, International Institute of Acoustics and Vibration (IIAV)

    Dr Roger SERRA

  55. Influence of machining cycle of horizontal milling on the quality of cutting force measurement for the cutting tool wear monitoring

    Article • Production Engineering, July 2008, Springer Science + Business Media

    Dr Roger SERRA

  56. Une analyse modale de type stochastique sous-espace avec prévision de l'erreur statistique sur les amortissements

    Article • Mécanique & Industries, March 2005, EDP Sciences

    Dr Roger SERRA

  57. A Subspace Fitting Method based on Finite Elements for Identification and Localisation of Damage in Mechanical Systems

    Article • Civil-Comp, Ltd.

    Dr Roger SERRA