All Stories

  1. Pore-scale modeling of multiphase flow in porous media using a conditional generative adversarial network (cGAN)
  2. Characterisation on the hygrothermal degradation in the mechanical property of structural adhesive: A novel meso-scale approach
  3. Simultaneous removal of cationic and anionic heavy metal contaminants from electroplating effluent by hydrotalcite adsorbent with disulfide (S2-) intercalation
  4. Carotid Bifurcation With Tandem Stenosis—A Patient-Specific Case Study Combined in vivo Imaging, in vitro Histology and in silico Simulation
  5. Role of Nitrogen on the Mechanical Properties of the Novel Carbon Nitride Nanothreads
  6. In Situ Atomic-Scale Study on the Ultralarge Bending Behaviors of TiO2–B/Anatase Dual-Phase Nanowires
  7. Two-Dimensional CuTe2X (X = Cl, Br, and I): Potential Photocatalysts for Water Splitting under the Visible/Infrared Light
  8. Quantified dense gas conical diffuser performance under uncertainties by flow characteristic analysis
  9. Aberrant activation of Wnt signaling pathway altered osteocyte mineralization
  10. How Gaseous Environment Influences a Carbon Nanotube-Based Mechanical Resonator
  11. Thermal Transport in 3D Nanostructures
  12. Euler-Lagrange Prediction of Diesel-Exhaust Polydisperse Particle Transport and Deposition in Lung: Anatomy and Turbulence Effects
  13. Molecular insights on the interference of simplified lung surfactant models by gold nanoparticle pollutants
  14. Graphynes: an alternative lightweight solution for shock protection
  15. Optical coherence tomography-based patient-specific coronary artery reconstruction and fluid–structure interaction simulation
  16. A novel super-elastic carbon nanofiber with cup-stacked carbon nanocones and a screw dislocation
  17. Interaction pressure tensor on high-order lattice Boltzmann models for nonideal fluids
  18. Smoothed Finite Element Methods for Predicting the Mid to High Frequency Acoustic Response in the Cylinder-Head Chamber of a Diesel Engine
  19. Modeling of mass transfer enhancement in a magnetofluidic micromixer
  20. Uncertainty Quantification in high-density fluid radial-inflow turbines for renewable low-grade temperature cycles
  21. A coarse-grained red blood cell membrane model to study stomatocyte-discocyte-echinocyte morphologies
  22. Impact of Nanoparticle Uptake on the Biophysical Properties of Cell for Biomedical Engineering Applications
  23. Adsorption of Collagen-like Peptides onto Gold Nanosurfaces
  24. CoB6 monolayer: A robust two-dimensional ferromagnet
  25. The stress-strain relationship of liquid marbles under compression
  26. Interaction of gold nanosurfaces/nanoparticles with collagen-like peptides
  27. General existence of flexural mode doublets in nanowires targeting vectorial sensing applications
  28. A coarse-grained multiscale model to simulate morphological changes of food-plant tissues undergoing drying
  29. Transient heat transfer and non-isothermal particle-laden gas flows through porous metal foams of differing structure
  30. Engineering the mechanical properties of CNT/PEEK nanocomposites
  31. Atomic-scale investigation on the ultra-large bending behaviours of layered sodium titanate nanowires
  32. Prediction of atherosclerotic plaque life – Perceptions from fatigue analysis
  33. Reproducing kernel particle method for two-dimensional time-space fractional diffusion equations in irregular domains
  34. A numerical investigation of drug extravasation using a tumour–vasculature microfluidic device
  35. Polydisperse Microparticle Transport and Deposition to the Terminal Bronchioles in a Heterogeneous Vasculature Tree
  36. Numerical Investigation of Atherosclerotic Plaque Rupture using Optical Coherence Tomography Imaging and XFEM
  37. A 3-D coupled Smoothed Particle Hydrodynamics and Coarse-Grained Model to Simulate Drying Mechanisms of Small Cell Aggregates
  38. Effectiveness of optimized control strategy and different hub height turbines on a real wind farm optimization
  39. Molecular dynamics simulations of adsorption and desorption of bone morphogenetic protein-2 on textured hydroxyapatite surfaces
  40. Steered molecular dynamics characterization of the elastic modulus and deformation mechanisms of single natural tropocollagen molecules
  41. Underlying burning resistant mechanisms for titanium alloy
  42. Atypical Defect Motions in Brittle Layered Sodium Titanate Nanowires
  43. A Comparative Study of Mixed Resolved–Unresolved CFD-DEM and Unresolved CFD-DEM Methods for the Solution of Particle-Laden Liquid Flows
  44. A new regularization method for the dynamic load identification of stochastic structures
  45. Distorted Janus Transition Metal Dichalcogenides: Stable Two-Dimensional Materials with Sizable Band Gap and Ultrahigh Carrier Mobility
  46. Single-molecule insights into surface-mediated homochirality in hierarchical peptide assembly
  47. Simplest MOF Units for Effective Photodriven Hydrogen Evolution Reaction
  48. Coupled CFD-DEM simulation of oscillatory particle-laden fluid flow through a porous metal foam heat exchanger: Mitigation of particulate fouling
  49. Graphene Helicoid: Distinct Properties Promote Application of Graphene Related Materials in Thermal Management
  50. Theoretical investigation of calcium-decorated β 12 boron sheet for hydrogen storage
  51. Thermal conduction of one-dimensional carbon nanomaterials and nanoarchitectures
  52. Notch expressed by osteocytes plays a critical role in mineralisation
  53. Parametric study on cement treated aggregate panel under impact load
  54. In situ mechanical resonance behaviour of pristine and defective zinc blende GaAs nanowires
  55. Application of a coupled smoothed particle hydrodynamics (SPH) and coarse-grained (CG) numerical modelling approach to study three-dimensional (3-D) deformations of single cells of different food-plant materials during drying
  56. Breakdown of Hooke's law at the nanoscale – 2D material-based nanosprings
  57. Two dimensional boron nanosheets: synthesis, properties and applications
  58. A novel numerical model to predict the morphological behavior of magnetic liquid marbles using coarse grained molecular dynamics concepts
  59. Development of realistic food microstructure considering the structural heterogeneity of cells and intercellular space
  60. A coupled finite volume & discrete element method to examine particulate foulant transport in metal foam heat exchangers
  61. A multiscale evaluation of the surface integrity in boring trepanning association deep hole drilling
  62. Investigation of red blood cell mechanical properties using AFM indentation and coarse-grained particle method
  63. Accurate Multi-Physics Numerical Analysis of Particle Preconcentration Based on Ion Concentration Polarization
  64. Two- and four-way coupling of cohesive poly-disperse particulate foulants on a metal foam fibre immersed in quiescent fluid
  65. Analysis of particle-laden fluid flows, tortuosity and particle-fluid behaviour in metal foam heat exchangers
  66. MRI magic-angle effect in femorotibial cartilages of the red kangaroo
  67. Heat Transfer Enhancement in a Baffled Attic-Shaped Space
  68. Optimizing the Unrestricted Wind Turbine Placements with Different Turbine Hub Heights
  69. An agent-based method for simulating porous fluid-saturated structures with indistinguishable components
  70. Ultrafine particle transport and deposition in a large scale 17-generation lung model
  71. A computationally-efficient layout optimization method for real wind farms considering altitude variations
  72. Graphene helicoid as novel nanospring
  73. Unexpected dynamic recrystallization behavior of Ti-7Cu alloy in semi-solid state
  74. Application of 3D imaging and analysis techniques for the study of food plant cellular deformations during drying
  75. Pulmonary aerosol transport and deposition analysis in upper 17 generations of the human respiratory tract
  76. Turbulent dense gas flow characteristics in swirling conical diffuser
  77. Optimization of wind farm layout with complex land divisions
  78. Mechanical Properties of Penta-Graphene Nanotubes
  79. Strained graphitic carbon nitride for hydrogen purification
  80. The best features of diamond nanothread for nanofibre applications
  81. Nanojoint Formation between Ceramic Titanate Nanowires and Spot Melting of Metal Nanowires with Electron Beam
  82. Novel trends in numerical modelling of plant food tissues and their morphological changes during drying – A review
  83. A review of biomass burning: Emissions and impacts on air quality, health and climate in China
  84. Heterogeneous nanomechanical properties of type I collagen in longitudinal direction
  85. Modeling heat transfer during friction stir welding using a meshless particle method
  86. Numerical investigation of diesel exhaust particle transport and deposition in the CT-scan based lung airway
  87. Graphene and Carbon Nanotube Hybrid Structure: A Review
  88. Numerical investigation of the temporal evolution of particulate fouling in metal foams for air-cooled heat exchangers
  89. SPH-DEM approach to numerically simulate the deformation of three-dimensional RBCs in non-uniform capillaries
  90. Investigation of Cell-Substrate Adhesion Properties of Living Chondrocyte by Measuring Adhesive Shear Force and Detachment Using AFM and Inverse FEA
  91. Substantial Band-Gap Tuning and a Strain-Controlled Semiconductor to Gapless/Band-Inverted Semimetal Transition in Rutile Lead/Stannic Dioxide
  92. A Quasi-Conforming Point Interpolation Method (QC-PIM) for Elasticity Problems
  93. The morphology and temperature dependent tensile properties of diamond nanothreads
  94. Anomalous Enhancement of Mechanical Properties in the Ammonia Adsorbed Defective Graphene
  95. A Novel Experimental Method to Assess Particle Deposition in Idealized Porous Channels
  96. Failure mechanism of monolayer graphene under hypervelocity impact of spherical projectile
  97. Natural convection subject to sinusoidal thermal forcing on inclined walls and heat source located on bottom wall of an attic-shaped space
  98. A novel control strategy approach to optimally design a wind farm layout
  99. Comparison of the effectiveness of analytical wake models for wind farm with constant and variable hub heights
  100. An advanced numerical modeling for Riesz space fractional advection–dispersion equations by a meshfree approach
  101. Tailorable Burning Behavior of Ti14 Alloy by Controlling Semi-Solid Forging Temperature
  102. Effect of rotating cylinder on heat transfer in a differentially heated rectangular enclosure filled with power law non-Newtonian fluid
  103. A New Particle Generation Method for Arbitrary 2D Geometries in SPH Modeling
  104. Two-Layer Red Blood Cell Membrane Model Using the Discrete Element Method
  105. Efficient Removal of Cationic and Anionic Radioactive Pollutants from Water Using Hydrotalcite-Based Getters
  106. Diamond Nanothread as a New Reinforcement for Nanocomposites
  107. Graphene-like Two-Dimensional Ionic Boron with Double Dirac Cones at Ambient Condition
  108. Thermal Conductivity of Graphene and Its Polymer Nanocomposites: A Review
  109. Facilitated receptor-recognition and enhanced bioactivity of bone morphogenetic protein-2 on magnesium-substituted hydroxyapatite surface
  110. Thermal conductivity of a new carbon nanotube analog: The diamond nanothread
  111. Control of flow around a circular cylinder wrapped with a porous layer by magnetohydrodynamic
  112. An elastic–plastic asperity contact model and its application for micro-contact analysis of gear tooth profiles
  113. Transient air flow and heat transfer due to differential heating on inclined walls and heat source placed on the bottom wall in a partitioned attic shaped space
  114. Investigation of the Effects of Extracellular Osmotic Pressure on Morphology and Mechanical Properties of Individual Chondrocyte
  115. Predicting a new phase (T′′) of two-dimensional transition metal di-chalcogenides and strain-controlled topological phase transition
  116. Natural Convection Heat Transfer in the Partitioned Attic Space
  117. High-mobility anisotropic transport in few-layer γ-B28films
  118. From brittle to ductile: a structure dependent ductility of diamond nanothread
  119. Graphene with Patterned Fluorination: Morphology Modulation and Implications
  120. Single Layer Bismuth Iodide: Computational Exploration of Structural, Electrical, Mechanical and Optical Properties
  121. Two-dimensional graphene heterojunctions: The tunable mechanical properties
  122. A coupled SPH-DEM approach to model the interactions between multiple red blood cells in motion in capillaries
  123. Acoustic analysis using a mass-redistributed smoothed finite element method with quadrilateral mesh
  124. A new constraint handling method for wind farm layout optimization with lands owned by different owners
  125. Nanostructured hydroxyapatite surfaces-mediated adsorption alters recognition of BMP receptor IA and bioactivity of bone morphogenetic protein-2
  126. Investigation of the mechanical behavior of kangaroo humeral head cartilage tissue by a porohyperelastic model based on the strain-rate-dependent permeability
  127. Comparative study on optimizing the wind farm layout using different design methods and cost models
  128. Biophysical response of living cells to boron nitride nanoparticles: uptake mechanism and bio-mechanical characterization
  129. Finite element method for space-time fractional diffusion equation
  130. A three-dimensional hybrid smoothed finite element method (H-SFEM) for nonlinear solid mechanics problems
  131. Physical mechanisms underlying the strain-rate-dependent mechanical behavior of kangaroo shoulder cartilage
  132. Effects of surface atomistic modification on mechanical properties of gold nanowires
  133. Variable-based Ramberg–Osgood constitutive model of power spinning bushing
  134. Microscale consolidation analysis of relaxation behavior of single living chondrocytes subjected to varying strain-rates
  135. Numerical Investigation of Motion and Deformation of a Single Red Blood Cell in a Stenosed Capillary
  136. Tuning the resonance properties of 2D carbon nanotube networks towards a mechanical resonator
  137. Adaptive finite element analysis of elliptic problems based on bubble-type local mesh generation
  138. Numerical investigation of plant tissue porosity and its influence on cellular level shrinkage during drying
  139. A meshless method based on Point Interpolation Method (PIM) for the space fractional diffusion equation
  140. Comprehensive Contribution of Filament Thickness and Crosslinker Failure to the Rheological Property of F-actin Cytoskeleton
  141. Application of meshfree methods to numerically simulate microscale deformations of different plant food materials during drying
  142. Natural convection due to differential heating of inclined walls and heat source placed on bottom wall of an attic shaped space
  143. Suppressed Thermal Conductivity of Bilayer Graphene with Vacancy-Initiated Linkages
  144. A poroviscohyperelastic model for numerical analysis of mechanical behavior of single chondrocyte
  145. Natural convection in a triangular enclosure heated from below and non-uniformly cooled from top
  146. Carbon nanotube-based super nanotubes: tunable thermal conductivity in three dimensions
  147. The Assessment of Toxicity of Boron Nitride Nanoparticle Using Atomic Forced Microscopy
  148. An effective sub-domain smoothed Galerkin method for free and forced vibration analysis
  149. Three-dimensional off-design numerical analysis of an organic Rankine cycle radial-inflow turbine
  150. Numerical Investigation of Case Hardening of Plant Tissue During Drying and Its Influence on the Cellular-Level Shrinkage
  151. A constitutive model for mechanical response characterization of pumpkin peel and flesh tissues under tensile and compressive loadings
  152. NUMERICAL INVESTIGATION OF MECHANICAL AND THERMAL DYNAMIC PROPERTIES OF THE INDUSTRIAL TRANSFORMER
  153. ANALYSIS OF STRAIN-RATE DEPENDENT MECHANICAL BEHAVIOR OF SINGLE CHONDROCYTE: A FINITE ELEMENT STUDY
  154. EDITORIAL
  155. Thermal conductivity of configurable two-dimensional carbon nanotube architecture and strain modulation
  156. Structure-mediated thermal transport of monolayer graphene allotropes nanoribbons
  157. Impact and energy absorption of portable water-filled road safety barrier system fitted with foam
  158. Effect of joint mechanism on vehicle redirectional capability of water-filled road safety barrier systems
  159. Temperature and strain-rate dependent fracture strength of graphynes
  160. Determination of Strain-Rate-Dependent Mechanical Behavior of Living and Fixed Osteocytes and Chondrocytes Using Atomic Force Microscopy and Inverse Finite Element Analysis
  161. Transient air flow and heat transfer in a triangular enclosure with a conducting partition
  162. ICCM2012 – Topical Issue on computational methods, numerical modelling & simulation in Applied Mathematical Modelling
  163. Finite volume and finite element methods for solving a one-dimensional space-fractional Boussinesq equation
  164. A coupled SPH-DEM model for micro-scale structural deformations of plant cells during drying
  165. 3D CFD Simulations of a Candidate R143A Radial-Inflow Turbine for Geothermal Power Applications
  166. Tensile Properties of Si Nanowires with Faulted Stacking Layers
  167. Simulation of plant cell shrinkage during drying – A SPH–DEM approach
  168. Molecular Sliding Filament Model for Muscular Contraction Based on Multiscale Investigation
  169. Fluid–structure interaction analysis by coupled FE–SPH model based on a novel searching algorithm
  170. Unsteady Natural Convection Within a Porous Enclosure of Sinusoidal Corrugated Side Walls
  171. Resonance of graphene nanoribbons doped with nitrogen and boron: a molecular dynamics study
  172. A general approach to tune the vibration properties of the mounting system in the high-speed and heavy-duty engine
  173. Exploration of mechanisms underlying the strain-rate-dependent mechanical property of single chondrocytes
  174. Tuneable Resonance Properties of Graphene by Nitrogen-Dopant
  175. Revolute Joint Approach to Model Joint Mechanism in Water-Filled Road Safety Barriers
  176. Preface
  177. Mechanics of Microfilaments Networks: A Cross-Scales Study
  178. Magnetic Convection Heat Transfer in an Open Ended Enclosure Filled with Paramagnetic Fluids
  179. Impact of the Piston Secondary Motion on its Slap Force
  180. Fluid–structure interaction analysis of full scale vehicle-barrier impact using coupled SPH–FEA
  181. Neutral and charged boron-doped fullerenes for CO 2 adsorption
  182. A stochastic thermostat algorithm for coarse-grained thermomechanical modeling of large-scale soft matters: Theory and application to microfilaments
  183. Tensile properties of a boron/nitrogen-doped carbon nanotube–graphene hybrid structure
  184. Graphene ripples generated by grain boundaries in highly ordered pyrolytic graphite
  185. A sub-domain smoothed Galerkin method for solid mechanics problems
  186. Scanning Electron Microscopic Study of Microstructure of Gala Apples During Hot Air Drying
  187. A meshfree-based local Galerkin method with condensation of degree of freedom for elastic dynamic analysis
  188. Effect of Reynolds numbers on flow past four square cylinders in an in-line square configuration for different gap spacings
  189. Adhesive characteristics of low dimensional carbon nanomaterial on actin
  190. Tailoring the Resonance of Bilayer Graphene Sheets by Interlayer sp 3 Bonds
  191. A particle based model to simulate microscale morphological changes of plant tissues during drying
  192. Mechanical bending properties of sodium titanate (Na2Ti3O7) nanowires
  193. Unsteady buoyancy driven flows and heat transfer through coupled thermal boundary layers in a partitioned triangular enclosure
  194. Similarity Solutions for Flow and Heat Transfer of Non-Newtonian Fluid over a Stretching Surface
  195. Heat Transfer Analysis of Viscous Incompressible Fluid by Combined Natural Convection and Radiation in an Open Cavity
  196. Bending properties of Ag nanowires with pre-existing surface defects
  197. A RBF meshless approach for modeling a fractal mobile/immobile transport model
  198. A meshfree-based local Galerkin method with condensation of degree of freedom
  199. Physical mechanism of the compressive response of F-actin networks: significance of crosslinker unbinding events
  200. Stress relaxation analysis of single chondrocytes using porohyperelastic model based on AFM experiments
  201. Hyperelastic Constitutive Relationship for the Strain-Rate Dependent Behavior of Shoulder and Other Joint Cartilages
  202. Porohyperelastic Analysis of Single Osteocyte Using AFM and Inverse FEA
  203. F-actin crosslinker: A key player for the mechanical stability of filopodial protrusion
  204. Thermal conductivity of Si nanowires with faulted stacking layers
  205. Mechanical properties of bioinspired bicontinuous nanocomposites
  206. NUMERICAL SIMULATIONS OF PARTICLE DEPOSITION IN METAL FOAM HEAT EXCHANGERS
  207. TENSILE PROPERTIES OF GRAPHENE-NANOTUBE HYBRID STRUCTURES: A MOLECULAR DYNAMICS STUDY
  208. How to Increase the Accuracy of Analysis and Reduce the Computational Time in ANSYS in the Case of Deformation Study of Orthopedic Bone Plates
  209. Tensile Properties of Pumpkin Peel and Flesh Tissue and Review of Current Testing Methods
  210. A Monte-Carlo simulation method for industry transformer health prediction based on dissolved gas analysis
  211. Mixed Convection Over a Horizontal Plate With Streamwise Non-Uniform Surface Temperature Distribution
  212. A dynamic wheel–rail impact analysis of railway track under wheel flat by finite element analysis
  213. Hierarchical multiscale model for biomechanics analysis of microfilament networks
  214. Numerical Characterization of Nanowires
  215. Mechanical properties of graphene: Effects of layer number, temperature and isotope
  216. A HYBRID SMOOTHED FINITE ELEMENT METHOD (H-SFEM) TO SOLID MECHANICS PROBLEMS
  217. Steady Natural Convection of Non-Newtonian Power-Law Fluid in a Trapezoidal Enclosure
  218. Numerical Study of Impact Forces on Railway Sleepers under Wheel Flat
  219. Studies on Bending Limitations for the Optimal Fit of Orthopaedic Bone Plates
  220. Deconvolution of mechanical properties of thin films from nanoindentation measurement via finite element optimization
  221. Prandtl number scaling of the unsteady natural convection boundary layer adjacent to a vertical flat plate for subject to ramp surface heat flux
  222. COLLECTIVE DYNAMICS AND CONTROL OF A 3-D SMALL-WORLD NETWORK WITH TIME DELAYS
  223. Surface effects on the dual-mode vibration of 〈1 1 0〉 silver nanowires with different cross-sections
  224. Hardness of silicon nitride thin films characterised by nanoindentation and nanoscratch deconvolution methods
  225. Unsteady natural convection within a differentially heated enclosure of sinusoidal corrugated side walls
  226. Impact & Energy Absorption of Road Safety Barriers by Coupled SPH/FEM
  227. Influence of pre-exsiting surface defects on the vibrational properties of Ag nanowires
  228. Molecular investigation of the mechanical properties of single actin filaments based on vibration analyses
  229. Atomistic Investigations of Single-Crystal Silicon with Pre-Existing Defects
  230. A fundamental numerical and theoretical study for the vibrational properties of nanowires
  231. A NOVEL QUADRATIC EDGE-BASED SMOOTHED CONFORMING POINT INTERPOLATION METHOD (ES-CPIM) FOR ELASTICITY PROBLEMS
  232. Study of Mechanical Deformations on Tough Skinned Vegetables during Mechanical Peeling Process (A Review)
  233. Orthopedic bone plates: Evolution in Structure, Implementation technique and biomaterial
  234. Natural convection from a vertical plate embedded in a stratified medium with uniform heat source
  235. Effective shear modulus approach for two dimensional solids and plate bending problems by meshless point collocation method
  236. Modified beam theories for bending properties of nanowires considering surface/intrinsic effects and axial extension effect
  237. Theoretical and numerical investigation of bending properties of Cu nanowires
  238. Scaling for the Prandtl number of the natural convection boundary layer of an inclined flat plate under uniform surface heat flux
  239. MD INVESTIGATIONS FOR MECHANICAL PROPERTIES OF COPPER NANOWIRES WITH AND WITHOUT SURFACE DEFECTS
  240. Beat phenomena in metal nanowires, and their implications for resonance-based elastic property measurements
  241. Anomalous sub-diffusion equations by the meshless collocation method
  242. Handling Incomplete Data in Survival Analysis with Multiple Covariates
  243. PREDICTION OF STRUCTURAL INTEGRITY, ROBUSTNESS, AND SERVICE LIFE USING ADVANCED FINITE ELEMENT METHODS
  244. Numerical exploration of plastic deformation mechanisms of copper nanowires with surface defects
  245. An Enriched Radial Point Interpolation Method Based on Weak-Form and Strong-Form
  246. AN ADVANCED MESHLESS METHOD FOR TIME FRACTIONAL DIFFUSION EQUATION
  247. A NODE-BASED SMOOTHED CONFORMING POINT INTERPOLATION METHOD (NS-CPIM) FOR ELASTICITY PROBLEMS
  248. A new tip area function for instrumented nanoindentation at extremely small contact depths
  249. Quantitative Fit Assessment of a Precontoured Fracture Fixation Plate: Its Automation and an Investigation on the Borderline Cases
  250. Numerical Exploration of the Defect’s Effect on Mechanical Properties of Nanowires under Torsion
  251. Exploration of the Defect’s Effect on the Mechanical Properties of Different Orientated Nanowires
  252. Effect of Micro Scale on Prediction of Thermal Residual Stresses in Multilayer Ceramic Capacitors (MLCCs)
  253. Survival analysis using neural network hazard model with incomplete covariate data
  254. Time-dependent fractional advection-diffusion equations by an implicit MLS meshless method
  255. Advanced Numerical Characterization of Mono-Crystalline Copper with Defects
  256. An implicit RBF meshless approach for time fractional diffusion equations
  257. An enriched radial point interpolation method (e-RPIM) for analysis of crack tip fields
  258. A nanoscratch method for measuring hardness of thin films
  259. Theoretical Analysis of Serrated Chip Formation Based on Ideal Models in High Speed Cutting
  260. Meshless TL and UL Approaches for Large Deformation Analysis
  261. A Modified Quality Control Method for Manufacturing Process in Mask Industry
  262. A point interpolation method with locally smoothed strain field (PIM-LS2) for mechanics problems using triangular mesh
  263. A CONFORMING POINT INTERPOLATION METHOD (CPIM) BY SHAPE FUNCTION RECONSTRUCTION FOR ELASTICITY PROBLEMS
  264. Design methods of rhombic tensegrity structures
  265. An Adaptive Local Meshfree Updated Lagrangian Approach for Large Deformation Analysis of Metal Forming
  266. An Enriched Radial Point Interpolation Method (e-RPIM) for the Analysis of Crack Tip
  267. A Coupled Meshless Technique∕Molecular Dynamics Approach for Deformation Characterization of Mono-crystalline Metal
  268. Determination of Elastic Modulus of Thin Coating Materials Using Nanoindentation and Finite Element Analysis
  269. AN ELASTO-PLASTIC ANALYSIS OF SOLIDS BY THE LOCAL MESHLESS METHOD BASED ON MLS
  270. A bridging transition technique for the combination of meshfree method with finite element method in 2D solids and structures
  271. An effective multiscale approach for deformation analyses of carbon nanotube-based nanoswitches
  272. GEOMETRICALLY NONLINEAR ANALYSIS OF MICROSWITCHES USING THE LOCAL MESHFREE METHOD
  273. An extended Galerkin weak form and a point interpolation method with continuous strain field and superconvergence using triangular mesh
  274. A coupled numerical approach for nonlinear dynamic fluid‐structure interaction analysis of a near‐bed submarine pipeline
  275. Coupling of the meshfree and finite element methods for determination of the crack tip fields
  276. Crack Analysis Using an Improved Meshless Technique with Irregular Nodes
  277. A Multiscale Deformation Analysis for Mono-Crystalline Copper under Dynamic Uniaxial Tension
  278. A pseudo-elastic local meshless method for analysis of material nonlinear problems in solids
  279. A meshless local Kriging method for large deformation analyses
  280. Deformation characterization of a nanoelectromechanical switch
  281. A Concurrent Multiscale Method Based on the Meshfree Method and Molecular Dynamics Analysis
  282. A simple method for analysing the deformation of nanoelectromechanical switches based on carbon nanotubes
  283. EDITORIAL
  284. MESHFREE METHODS AND THEIR COMPARISONS
  285. Application of Meshless Local Petrov-Galerkin (MLPG) Approach to Simulation of Incompressible Flow
  286. Meshless techniques for convection dominated problems
  287. A meshfree radial point interpolation method (RPIM) for three-dimensional solids
  288. Meshless methods coupled with other numerical methods
  289. An Introduction to Meshfree Methods and Their Programming
  290. A meshfree weak-strong (MWS) form method for time dependent problems
  291. Analysis of microelectromechanical systems (mems) by meshless local kriging (lokriging) method
  292. Boundary meshfree methods based on the boundary point interpolation methods
  293. Assessment and applications of point interpolation methods for computational mechanics
  294. A meshfree method: meshfree weak?strong (MWS) form method, for 2-D solids
  295. Hybrid boundary point interpolation methods and their coupling with the element free Galerkin method
  296. Comparison between the radial point interpolation and the Kriging interpolation used in meshfree methods
  297. A matrix triangularization algorithm for the polynomial point interpolation method
  298. A radial point interpolation method for simulation of two-dimensional piezoelectric structures
  299. A point interpolation mesh free method for static and frequency analysis of two-dimensional piezoelectric structures
  300. Comparisons of two meshfree local point interpolation methods for structural analyses
  301. A boundary point interpolation method for stress analysis of solids
  302. A LOCAL RADIAL POINT INTERPOLATION METHOD (LRPIM) FOR FREE VIBRATION ANALYSES OF 2-D SOLIDS
  303. A local point interpolation method for static and dynamic analysis of thin beams
  304. A coupled element free Galerkin/boundary element method for stress analysis of two-dimensional solids
  305. A meshless local Petrov-Galerkin (MLPG) method for free and forced vibration analyses for solids
  306. A point interpolation method for two-dimensional solids
  307. Meshless local Petrov-Galerkin (MLPG) method in combination with finite element and boundary element approaches
  308. Coupling of element free Galerkin and hybrid boundary element methods using modified variational formulation
  309. STRESS ANALYSIS OF 3-D SOLIDS USING A MESHFREE RADIAL POINT INTERPOLATION METHOD