All Stories
- Temperature-dependent mechanical behavior of an Al0.5Cr0.9FeNi2.5V0.2 high-entropy alloy
Article
- Structure design and property of multiple-basis-element (MBE) alloys flexible films
Article
- The AlLiMgZnCu entropic alloy was treated by ultrasonic
Article
- Compressive ductility and fracture resistance in CuZr-based shape-memory metallic-glass composites
Article
- Effects of Cu and Zn on microstructures and mechanical behavior of the medium-entropy aluminum alloy
Article
- Structural damage and phase stability of Al0.3CoCrFeNi high entropy alloy under high temperature ion irradiation
- A body-centered cubic Zr50Ti35Nb15 medium-entropy alloy with unique properties
Article
- Fatigue Behavior of A Minor Yttrium Doped ZrCuNi-Based Metallic Glass Alloy Fabricated by Industrial Grade Raw Material
Article
- Diffusion Barrier Performance of AlCrTaTiZr/AlCrTaTiZr-N High-Entropy Alloy Films for Cu/Si Connect System
Article
- Wide-temperature-range perfect superelasticity and giant elastocaloric effect in a high entropy alloy
Article
- Investigations of new bulk metallic glass alloys fabricated using a high-pressure die-casting method based on industrial grade Zr raw material
- Two-way shape memory effect and magnetic-field-induced twin boundary motion in Ni-Mn-Ga microwire
- Mechanical Properties and Corrosion Resistance of NbTiAlSiZrNx High-Entropy Films Prepared by RF Magnetron Sputtering
- Compositional Design of Soft Magnetic High Entropy Alloys by Minimizing Magnetostriction Coefficient in (Fe0.3Co0.5Ni0.2)100−x(Al1/3Si2/3)x System
- Phase transformations of Al-bearing high-entropy alloys AlxCoCrFeNi (x = 0, 0.1, 0.3, 0.75, 1.5) at high pressure
Article
- Annealing effect for the Al0.3CoCrFeNi high-entropy alloy fibers
- Superlattice in austenitic Ni-Mn-Ga shape memory microwires
- Microstructure and Corrosion Behavior of (CoCrFeNi)95Nb5 High-Entropy Alloy Coating Fabricated by Plasma Spraying
- Sensitive Five-Fold Local Symmetry to Kinetic Energy of Depositing Atoms in Cu-Zr Thin Film Growth
- A Novel Low-Activation VCrFeTaxWx (x = 0.1, 0.2, 0.3, 0.4, and 1) High-Entropy Alloys with Excellent Heat-Softening Resistance
- Rare-earth high entropy alloys with hexagonal close-packed structure
- The balance between the gravity and the entropic force for a multicomponent alloy
- A Low-Cost Lightweight Entropic Alloy with High Strength
- High-Throughput Screening Solar-Thermal Conversion Films in a Pseudobinary (Cr, Fe, V)–(Ta, W) System
- Mechanical properties and thermal stability of (NbTiAlSiZr)Nx high-entropy ceramic films at high temperatures
- Novel high entropy alloys of FexCo1-xNiMnGa with excellent soft magnetic properties
- Effects of Nitrogen Content on the Structure and Mechanical Properties of (Al0.5CrFeNiTi0.25)Nx High-Entropy Films by Reactive Sputtering
- Compositional gradient films constructed by sputtering in a multicomponent Ti–Al–(Cr, Fe, Ni) system
- Deformation mechanisms of Al0.1CoCrFeNi high entropy alloy at ambient and cryogenic temperatures
- He behavior in Ni and Ni-based equiatomic solid solution alloy
- A brief review of high-entropy films
- Abnormal temperature dependence of impact toughness in Al CoCrFeNi system high entropy alloys
- Temperature effects on the serrated behavior of an Al0.5CoCrCuFeNi high-entropy alloy
- Cryogenic-deformation-induced phase transformation in an FeCoCrNi high-entropy alloy
- Effects of temperature on the irradiation responses of Al0.1CoCrFeNi high entropy alloy
- Science and technology in high-entropy alloys
- Low-hysteresis tensile superelasticity in a Ni-Co-Mn-Sn magnetic shape memory microwire
- Multistep superelasticity of Ni-Mn-Ga and Ni-Mn-Ga-Co-Cu microwires under stress-temperature coupling
- Strengthening in Al0.25CoCrFeNi high-entropy alloys by cold rolling
- Synthesis of AlxCoCrFeNi high-entropy alloys by high-gravity combustion from oxides
- Serration and noise behaviors in materials
- Ni-Mn-Ga microwire twist caused by stress-magnetic coupling
- Optical simulation and preparation of novel Mo/ZrSiN/ZrSiON/SiO 2 solar selective absorbing coating
- Tailoring magnetic behavior of CoFeMnNiX (X = Al, Cr, Ga, and Sn) high entropy alloys by metal doping
- Big-data analysis of phase-formation rules in high-entropy alloys
- Mass production of magnetocaloric LaFeMnSiB alloys with hydrogenation
- Non-linear behavior in advanced materials
- Amorphous phase stability of NbTiAlSiN X high-entropy films
- Weibull Statistical Reliability Analysis of Mechanical and Magnetic Properties of FeCuNbxSiB Amorphous Fibers
- Magnetic-field-induced twist in Ni-Mn-Ga-Co-Cu microwires
- 14% recoverable strain in Ni52.87Mn23.82Ga23.32 microwires
- The Al Effects of Co-Free and V-Containing High-Entropy Alloys
- Shape Memory and Huge Superelasticity in Ni–Mn–Ga Glass-Coated Fibers
- Amorphous phase formation rules in high-entropy alloys
- High-entropy Al0.3CoCrFeNi alloy fibers with high tensile strength and ductility at ambient and cryogenic temperatures
- Tuning of reflectance transition position of Al-AlN cermet solar selective absorbing coating by simulating
- Nanocrystals generated under tensile stress in metallic glasses with phase selectivity
- Phase stability and microstructures of high entropy alloys ion irradiated to high doses
- Phase Separation and High-Temperature Tensile Properties of Al0.5CrFeNiTi0.25 High Entropy Alloy
- Design of Light-Weight High-Entropy Alloys
- NbTaV-(Ti,W) refractory high-entropy alloys: Experiments and modeling
- Precipitation behavior of Al x CoCrFeNi high entropy alloys under ion irradiation
- Superelasticity of Cu–Ni–Al shape-memory fibers prepared by melt extraction technique
- Nano-Crystallization of High-Entropy Amorphous NbTiAlSiWxNy Films Prepared by Magnetron Sputtering
- G-mode magnetic force microscopy: Separating magnetic and electrostatic interactions using big data analytics
- Effect of Strain Rate on Deformation Behavior of AlCoCrFeNi High-Entropy Alloy by Nanoindentation
- A hexagonal close-packed high-entropy alloy: The effect of entropy
- The ultrahigh charpy impact toughness of forged AlxCoCrFeNi high entropy alloys at room and cryogenic temperatures
- Enhancement of mechanical and electrochemical properties of Al0.25CrCoFe1.25Ni1.25 high-entropy alloys by coating Ni–P amorphous films
- Investigation on low thermal emittance of Al films deposited by magnetron sputtering
- Phase Formation Rules
- Fabrication Routes
- High-Entropy Alloys
- Functional Properties
- A Brief Review of High Entropy Alloys and Serration Behavior and Flow Units
- Molecular dynamics simulation of Al–Co–Cr–Cu–Fe–Ni high entropy alloy thin film growth
- Serration and Noise Behavior in Advanced Materials
- Strain rate effects on the dynamic mechanical properties of the AlCrCuFeNi2 high-entropy alloy
- Superior Mechanical Properties of AlCoCrFeNiTi x High-Entropy Alloys upon Dynamic Loading
- Microstructural features and tensile behaviors of the Al0.5CrCuFeNi2 high-entropy alloys by cold rolling and subsequent annealing
- Effect of temperature on mechanical properties of Ti-based metallic glass matrix composite
- Influence of Bridgman solidification on microstructures and magnetic behaviors of a non-equiatomic FeCoNiAlSi high-entropy alloy
- Fracture Morphology and Local Deformation Characteristics in the Metallic Glass Matrix Composite Under Tension
- Effects of AL addition on microstructure and mechanical properties of AlxCoCrFeNi High-entropy alloy
- Irradiation Behavior in High Entropy Alloys
- Fracture Toughness and Fatigue Crack Growth Behavior of As-Cast High-Entropy Alloys
- Effects of Temperature on Serrated Flows of Al0.5CoCrCuFeNi High-Entropy Alloy
- Irradiation Resistance in Al x CoCrFeNi High Entropy Alloys
- Direct evidence for stress-induced transformation between coexisting multiple martensites in a Ni–Mn–Ga multifunctional alloy
- Quasi-static and dynamic compression behaviors of metallic glass matrix composites
- A Criterion for Topological Close-Packed Phase Formation in High Entropy Alloys
- Erratum to: Phase Stability of Low-Density, Multiprincipal Component Alloys Containing Aluminum, Magnesium, and Lithium
- High-Entropy Alloys
- Microstructures and mechanical properties of Al CrFeNiTi0.25 alloys
- Corrosion and Serration Behaviors of TiZr0.5NbCr0.5VxMoy High Entropy Alloys in Aqueous Environments
- Effects of Al and Si addition on the structure and properties of CoFeNi equal atomic ratio alloy
- Erratum to: Temperature Effects on Deformation and Serration Behavior of High-Entropy Alloys (HEAs)
- Superior high tensile elongation of a single-crystal CoCrFeNiAl0.3 high-entropy alloy by Bridgman solidification
- Temperature Effects on Deformation and Serration Behavior of High-Entropy Alloys (HEAs)
- High strain rate compressive behavior of Ti-based metallic glass matrix composites
- The Phase Competition and Stability of High-Entropy Alloys
- Damping behavior of AlxCoCrFeNi high-entropy alloys by a dynamic mechanical analyzer
- Phase Stability of Low-Density, Multiprincipal Component Alloys Containing Aluminum, Magnesium, and Lithium
- In-situ Tension of Dendrite-Reinforced Zr-based Metallic-Glass-Matrix Composites
- Superelasticity and Serration Behavior in Small-Sized NiMnGa Alloys
- Guidelines in predicting phase formation of high-entropy alloys
- Designing Bulk Metallic Glass Composites with Enhanced Formability and Plasticity
- The role of the interface in a Ti-based metallic glass matrix composite within situdendrite reinforcement
- Microstructures and properties of high-entropy alloys
- Investigation of the microcrack evolution in a Ti-based bulk metallic glass matrix composite
- Microyielding of Core-Shell Crystal Dendrites in a Bulk-metallic-glass Matrix Composite
- Tuned Critical Avalanche Scaling in Bulk Metallic Glasses
- Microstructures and Crackling Noise of AlxNbTiMoV High Entropy Alloys
- Fabrication and Mechanical Characterization of Ti-Based Metallic Glass Matrix Composites by the Bridgman Solidification
- Preparation and giant magneto-impedance behavior of Co-based amorphous wires
- Aluminum Alloying Effects on Lattice Types, Microstructures, and Mechanical Behavior of High-Entropy Alloys Systems
- Shape Memory and Superelasticity in Amorphous/Nanocrystalline Cu-15.0 Atomic Percent (at.%) Sn Wires
- A Successful Synthesis of the CoCrFeNiAl0.3 Single-Crystal, High-Entropy Alloy by Bridgman Solidification
- Microwires fabricated by glass-coated melt spinning
- Optimizing mechanical properties of AlCoCrFeNiTi x high-entropy alloys by tailoring microstructures
- Dendritic and spherical crystal reinforced metallic glass matrix composites
- Nonlinear tensile deformation behavior of melt-extracted Co69.5Fe4.5Cr1Si8B17 amorphous wires
- Tensile deformation behaviors and damping properties of small-sized Cu–Zr–Al metallic glasses
- High-entropy Alloys with High Saturation Magnetization, Electrical Resistivity, and Malleability
- Evolution of Microstructures and Properties of the AlxCrCuFeNi2 High-Entropy Alloys
- Characteristic of improved fatigue performance for Zr-based bulk metallic glass matrix composites
- PROCESSING AND PROPERTIES OF Al3CrCuFeNi2SINGLE CRYSTAL HIGH--ENTROPY ALLOY
- Multi-step shear banding for bulk metallic glasses at ambient and cryogenic temperatures
- Eutectic reaction and cored dendritic morphology in yttrium doped Zr-based amorphous alloys
- Alloy Design and Properties Optimization of High-Entropy Alloys
- Tensile softening of metallic-glass-matrix composites in the supercooled liquid region
- Prediction of high-entropy stabilized solid-solution in multi-component alloys
- Processing and Properties of High-Entropy Alloys and Micro- and Nano-Wires
- Microstructure and Compressive Properties of NbTiVTaAlx High Entropy Alloys
- Microstructural control and properties optimization of high-entrop alloys
- Effect of Nb addition on the microstructure and properties of AlCoCrFeNi high-entropy alloy
- Micro forming and deformation behaviors of Zr50.5Cu27.45Ni13.05Al9 amorphous wires
- Processing and Properties of CuZr-Based Amorphous Microwires
- Morphology Transition from Dendrites to Equiaxed Grains for AlCoCrFeNi High-Entropy Alloys by Copper Mold Casting and Bridgman Solidification
- Tension-Tension-Fatigue Behaviors of a Zr-Based Bulk-Metallic-Glass-Matrix Composite
- CRYOGENIC RESISTIVITIES OF NbTiAlVTaLax, CoCrFeNiCu AND CoCrFeNiAl HIGH ENTROPY ALLOYS
- Microstructural Characteristics and Mechanical Behaviors of AlCoCrFeNi High-Entropy Alloys at Ambient and Cryogenic Temperatures
- Tensile deformation micromechanisms for bulk metallic glass matrix composites: From work-hardening to softening
- Ductile-to-brittle transition of in situ dendrite-reinforced metallic-glass–matrix composites
- Effect of Nb content on the microstructures and mechanical properties of Zr–Ti–Cu–Be–Nb glass-forming alloys
- Quasi-static and dynamic deformation behaviors of in situ Zr-based bulk-metallic-glass-matrix composites
- Continuously manufacturing of bulk metallic glass-coated wire composite
- Development of plastic Ti-based bulk-metallic-glass-matrix composites by controlling the microstructures
- Jerky-flow characteristics for a Zr-based bulk metallic glass
- Serrated flow kinetics in a Zr-based bulk metallic glass
- Resolving ensembled microstructural information of bulk-metallic-glass-matrix composites using synchrotron x-ray diffraction
- Low-temperature shear banding for a Cu-based bulk-metallic glass
- Ti–Zr–Be ternary bulk metallic glasses correlated with binary eutectic clusters
- Mechanical Properties and Structures of High Entropy Alloys and Bulk Metallic Glasses Composites
- Corrigendum to “Influence of yttrium addition on the glass forming ability in Cu–Zr–Al alloys” [Mater. Sci. Eng. A 483–484 (2008) 235–238]
- THREE DIMENSIONAL FEM SIMULATION OF TITANIUM HOLLOW MONOLITHIC STRUCTURE PROCESS BASED ON VISCO--PLASTIC CONSTITUTIVE
- Strain rate response of a Zr-based composite fabricated by Bridgman solidification
- Glass-Forming Ability and Competitive Crystalline Phases for Lightweight Ti-Be–Based Alloys
- Phase structures change from BCC to FCC in TixCoCrFeNiCu1−yAly high entropy alloys
- Glassy Formability and Structural Variation of Zr50−xCu50Alx (x=0∼25) Alloys with Respect to Icosahedral Short-Range Ordering
- Fabrication and mechanical characterization of a series of plastic Zr-based bulk metallic glass matrix composites
- Micromechanisms of plastic deformation of a dendrite/Zr-based bulk-metallic-glass composite
- Quasi-static and dynamic deformation behaviors of Zr-based bulk metallic glass composites fabricated by the Bridgman solidification
- Shear-band spacing controlled by Bridgman solidification in Dendrite/BMG composites
- A comparison of the nucleation and growth of shear bands in Ti and Zr-based bulk metallic glasses by in-situ tensile tests
- Effects of additional elements (M) on the thermal stability and structure of (Zr52.2Cu39.1Al8.7)100−xMx (M = Ag, Be, Gd, x = 8, 7, 2) amorphous alloys
- Strain rate response of mechanical behaviors for a Zr-based bulk metallic glass matrix composite
- Atomic packing efficiency and phase transition in a high entropy alloy
- Large plasticity and tensile necking of Zr-based bulk-metallic-glass-matrix composites synthesized by the Bridgman solidification
- Role of yttrium in glass formation of Ti-based bulk metallic glasses
- Cooling Rate and Size Effect on the Microstructure and Mechanical Properties of AlCoCrFeNi High Entropy Alloy
- Effect of Co addition on crystal structure and mechanical properties of Ti0.5CrFeNiAlCo high entropy alloy
- Tailoring Microstructures and Mechanical Properties of Zr-Based Bulk Metallic Glass Matrix Composites by the Bridgman Solidification
- Effect of Cu addition on the microstructure and mechanical properties of AlCoCrFeNiTi0.5 solid-solution alloy
- Phase transformation induced by lattice distortion in multiprincipal component CoCrFeNiCuxAl1−x solid-solution alloys
- Calculations of potential functions and thermophysical behaviors for La62Al14Ni12Cu12 and Cu46Zr44Al7Y3 bulk metallic glasses
- Fabrication and characterization of metallic glasses with a specific microstructure for micro-electro-mechanical system applications
- Influence of yttrium addition on the glass forming ability in Cu–Zr–Al alloys
- Microstructure characterizations and strengthening mechanism of multi-principal component AlCoCrFeNiTi0.5 solid solution alloy with excellent mechanical properties
- Solid-Solution Phase Formation Rules for Multi-component Alloys
- Homogenization treatment of high Nb containing TiAl alloys with as-cast and as-forged microstructures
- Minor alloying behavior in bulk metallic glasses and high-entropy alloys
- Solid Solution Formation Criteria for High Entropy Alloys
- Optimized interface and mechanical properties of W fiber/Zr-based bulk metallic glass composites by minor Nb addition
- Effect of liquidus temperature depression on glass forming ability criteria for La–Al–(Cu,Ni) alloys
- High temperature deformation behaviors of a high Nb containing TiAl alloy
- Solid solution alloys of AlCoCrFeNiTix with excellent room-temperature mechanical properties
- Microstructure and compressive properties of multicomponent Alx(TiVCrMnFeCoNiCu)100−x high-entropy alloys
- Isothermal corrosion TiAl–Nb alloy in liquid zinc
- Novel microstructure and properties of multicomponent CoCrCuFeNiTix alloys
- Solid Solution Formation Criteria for High Entropy Alloys
- A Porous Bulk Metallic Glass with Unidirectional Opening Pores
- Effect of ti on the microstructure and properties of CoCrCuFeNiTix high-entropy alloys
- A study of the glass forming ability in ZrNiAl alloys
- Glass forming ability criteria for La–Al–(Cu,Ni) alloys
- Cracking in Be/Al Nd: YAG laser weld
- Composition optimization of the NiZrYAl glass forming alloys
- Glass formation mechanism of minor yttrium addition in CuZrAl alloys
- Bulk metallic glass formation of Ti-based alloys from low purity elements
- Metallographic analysis of Cu–Zr–Al bulk amorphous alloys with yttrium addition
- Microstructure control and ductility improvement of La–Al–(Cu,Ni) composites by Bridgman solidification
- Effect of micro-structural changes on mechanical properties of La66Al14(Cu, Ni)20 amorphous and crystalline alloys
- Co dependence of Curie temperature in amorphous Fe–Co–Zr–B–Nb alloys with high glass-forming ability
- Bulk Glass Formation of 12 mm Rod in La–Cu–Ni–Al Alloys
- Synthesis of in situ bulk glass matrix composite in by Bridgman method
- Boron content dependence of crystallization, glass forming ability and magnetic properties in amorphous Fe-Zr-B-Nb alloys
- Synthesis of a La-based bulk metallic glass matrix composite
- Effects of high boron content on crystallization, forming ability and magnetic properties of amorphous Fe91−xZr5BxNb4 alloy
- Correlations between the glass transition, crystallization, apparent activation energy and glass forming ability in Fe based amorphous alloys
- Optimum glass formation at off-eutectic composition and its relation to skewed eutectic coupled zone in the La based La–Al–(Cu,Ni) pseudo ternary system
- Relationship between glass forming ability and thermal parameters of Zr based bulk metallic glasses
- Formation and properties of Zr48Nb8Cu14Ni12Be18 bulk metallic glass
- Glass-forming ability of Pr–(Cu,Ni)–Al alloys in eutectic system
- The Gr neisen parameter for bulk amorphous materials
- Glass forming properties of Zr-based bulk metallic alloys
- Role of addition in formation and properties of Zr-based bulk metallic glasses
- Synthesis of La-based in-situ bulk metallic glass matrix composite
- Synthèse de composites à matrice de verre métallique massif renforcée par une phase cristalline dans des alliages de lanthane et de palladium
- The eutectic point in Pr-rich Pr–Cu–Al ternary alloys
- Equation of state of bulk metallic glasses studied by an ultrasonic method
- Formation and properties of Zr48Nb8Fe8Cu12Be24 bulk metallic glass
- Glass forming ability and properties of Zr/Nb-based bulk metallic glasses
- Nd65Al10Fe25−xCox (x=0,5,10) bulk metallic glasses with wide supercooled liquid regions
- Kinetics of glass transition and crystallization in multicomponent bulk amorphous alloys
- Ultrasonic attenuation in Zr41Ti14Cu12.5Ni10−xBe22.5Cx (x=0,1) bulk metallic glasses under high pressure
- Crystallization kinetics and glass transition of Zr41Ti14Cu12.5Ni10−xFexBe22.5 bulk metallic glasses