All Stories

  1. An Arbitrary Lagrangian–Eulerian framework for the consistent analysis of entropy wave generation
  2. A new class of Galerkin expansion models for the study of thermoacoustic instabilities
  3. The role of hydrodynamic shear in the thermoacoustic response of slit flames
  4. Identification of entropy waves in a partially premixed combustor
  5. Flash-back, blow-off, and symmetry breaking of premixed conical flames
  6. Preserving transfer-behavior in Model Order Reduction for thermoacoustic stability analysis
  7. Categorization of thermoacoustic modes in an ideal resonator with phasor diagrams
  8. Incompressible versus compressible large eddy simulation for the identification of premixed flame dynamics
  9. Effect of hydrogen addition on the consumption speed of lean premixed laminar methane flames exposed to combined strain and heat loss
  10. Interplay of Clusters of Acoustic and Intrinsic Thermoacoustic Modes in Can-Annular Combustors
  11. Turbulence and heat release rate network structure in hydrogen-enriched combustion
  12. Large eddy simulation of the dynamics of lean premixed flames using global reaction mechanisms calibrated for CH4–H2 fuel blends
  13. Assessing accuracy, reliability, and efficiency of combustion models for prediction of flame dynamics with large eddy simulation
  14. LES-based prediction of technically premixed flame dynamics and comparison with perfectly premixed mode
  15. Linear instability of a premixed slot flame: Flame transfer function and resolvent analysis
  16. Hybrid CFD/low-order modeling of thermoacoustic limit cycle oscillations in can-annular configurations
  17. Response of spray number density and evaporation rate to velocity oscillations
  18. Convective Velocity Perturbations and Excess Gain in Flame Response as a Result of Flame-Flow Feedback
  19. A Hybrid Adjoint Network Model for Thermoacoustic Optimization
  20. Comparison of Model Order Reduction Methods in Thermo-Acoustic Stability Analysis
  21. LOW-ORDER MODEL OF THE DYNAMICS AND START-UP OF A PULSATING HEAT PIPE
  22. Confidence in Flame Impulse Response Estimation From Large Eddy Simulation With Uncertain Thermal Boundary Conditions
  23. Low-Order Modeling of Can-Annular Combustors
  24. Enhanced Longitudinal Heat Transfer in Oscillatory Channel Flow—A Theoretical Perspective
  25. Short- and long-term predictions of chaotic flows and extreme events: a physics-constrained reservoir computing approach
  26. Flame response to transverse velocity excitation leading to frequency doubling and modal coupling
  27. An exceptional point switches stability of a thermoacoustic experiment
  28. A categorization of marginally stable thermoacoustic modes based on phasor diagrams
  29. Robust identification of flame frequency response via multi-fidelity Gaussian process approach
  30. A criterion for thermo-acoustic stability based on the flux of acoustic energy
  31. A Strategy to Tune Acoustic Terminations of Single-Can Test-Rigs to Mimic Thermoacoustic Behavior of a Full Engine
  32. Low-Order Modeling to Investigate Clusters of Intrinsic Thermoacoustic Modes in Annular Combustors
  33. The Impact of Exceptional Points on the Reliability of Thermoacoustic Stability Analysis
  34. On the spurious entropy generation encountered in hybrid linear thermoacoustic models
  35. Reliable Calculation of Thermoacoustic Instability Risk Using an Imperfect Surrogate Model
  36. Physics-informed echo state networks
  37. A Gaussian-process-based framework for high-dimensional uncertainty quantification analysis in thermoacoustic instability predictions
  38. A state-space formulation of a discontinuous Galerkin method for thermoacoustic stability analysis
  39. Control of intrinsic thermoacoustic instabilities using hydrogen fuel
  40. A review of models for the response of premixed flames to acoustic perturbations
  41. Efficient Robust Design for Thermoacoustic Instability Analysis: A Gaussian Process Approach
  42. Learning Hidden States in a Chaotic System: A Physics-Informed Echo State Network Approach
  43. Large eddy simulation of enhanced heat transfer in pulsatile turbulent channel flow
  44. Thermoacoustic Spectrum of a Swirled Premixed Combustor With Partially Reflecting Boundaries
  45. Time-Domain Bloch Boundary Conditions for Efficient Simulation of Thermoacoustic Limit Cycles in (Can-)Annular Combustors
  46. Comparison of Machine Learning Techniques in the Interpolation and Extrapolation of Flame Describing Functions
  47. Prediction of Premixed Flame Dynamics Using Large Eddy Simulation With Tabulated Chemistry and Eulerian Stochastic Fields
  48. Propagation speed of inertial waves in cylindrical swirling flows
  49. Low-order Network Model of a Duct with Non-Uniform Cross-Section and Varying Mean Temperature in the Presence of Mean Flow
  50. Intrinsic thermoacoustic feedback loop in turbulent spray flames
  51. Comparison of Machine Learning Algorithms in the Interpolation and Extrapolation of Flame Describing Functions
  52. Efficient Robust Design for Thermoacoustic Instability Analysis: A Gaussian Process Approach
  53. Prediction of Premixed Flame Dynamics Using LES With Tabulated Chemistry and Eulerian Stochastic Fields
  54. Thermoacoustic Spectrum of a Swirled Premixed Combustor With Partially Reflecting Boundaries
  55. Time Domain Bloch Boundary Conditions for Efficient Simulation of Thermoacoustic Limit-Cycles in (Can-)Annular Combustors
  56. Consequences of flame geometry for the acoustic response of premixed flames
  57. Evaluating the impact of uncertainty in flame impulse response model on thermoacoustic instability prediction: A dimensionality reduction approach
  58. Non-dimensional groups for similarity analysis of thermoacoustic instabilities
  59. Prediction of combustion noise of an enclosed flame by simultaneous identification of noise source and flame dynamics
  60. Response of premixed flames to irrotational and vortical velocity fields generated by acoustic perturbations
  61. Inclusion of higher harmonics in the flame describing function for predicting limit cycles of self-excited combustion instabilities
  62. Thermoacoustic analysis of a laminar premixed flame using a linearized reactive flow solver
  63. Physics-Informed Echo State Networks for Chaotic Systems Forecasting
  64. Prediction of ducted diaphragm noise using a stochastic approach with adapted temporal filters
  65. Direct Assessment of the Acoustic Scattering Matrix of a Turbulent Swirl Combustor by Combining System Identification, Large Eddy Simulation and Analytical Approaches
  66. Quantification and Propagation of Uncertainties in Identification of Flame Impulse Response for Thermoacoustic Stability Analysis
  67. Thermoacoustic Modes of Quasi-One-Dimensional Combustors in the Region of Marginal Stability
  68. Exceptional points in the thermoacoustic spectrum
  69. Quantification of the Impact of Uncertainties in Operating Conditions on the Flame Transfer Function With Nonintrusive Polynomial Chaos Expansion
  70. In situ identification strategy of thermoacoustic stability in annular combustors
  71. Intrinsic thermoacoustic modes and their interplay with acoustic modes in a Rijke burner
  72. Part-Load Limit Reduction of a Frame 9E Using a Precursor for Combustion Dynamics
  73. Direct Assessment of the Acoustic Scattering Matrix of a Turbulent Swirl Combustor by Combining System Identification, Large Eddy Simulation and Analytical Approaches
  74. Thermoacoustic Modes of Quasi-1D Combustors in the Region of Marginal Stability
  75. Quantification of the Impact of Uncertainties in Operating Conditions on the Flame Transfer Function With Non-Intrusive Polynomial Chaos Expansion
  76. Determination of Acoustic Scattering Matrices from Linearized Compressible Flow Equations with Application to Thermoacoustic Stability Analysis
  77. Simultaneous identification of transfer functions and combustion noise of a turbulent flame
  78. Measurement and Simulation of Combustion Noise and Dynamics of a Confined Swirl Flame
  79. Modeling Heat Transfer and Skin Friction Frequency Responses of a Cylinder in Cross-Flow—a Unifying Perspective
  80. Identification of flame transfer functions in the presence of intrinsic thermoacoustic feedback and noise
  81. Uncertainty quantification and sensitivity analysis of thermoacoustic stability with non-intrusive polynomial chaos expansion
  82. Influence of flame-holder temperature on the acoustic flame transfer functions of a laminar flame
  83. Response of a swirl flame to inertial waves
  84. Measuring sound reflected/transmistted by ducted diaphragms using turbulence noise
  85. An analytical model based on the G-equation for the response of technically premixed flames to perturbations of equivalence ratio
  86. Modelling the generation of temperature inhomogeneities by a premixed flame
  87. Convective Scaling of Intrinsic Thermo-Acoustic Eigenfrequencies of a Premixed Swirl Combustor
  88. Nonlinear aeroacoustic characterization of Helmholtz resonators with a local-linear neuro-fuzzy network model
  89. The contribution of intrinsic thermoacoustic feedback to combustion noise and resonances of a confined turbulent premixed flame
  90. Quantitative Comparisons Between LES Predictions and Experimental Measurements of Sound Pressure Spectra in a Confined Swirl Combustor
  91. Bifurcation study of azimuthal bulk flow in annular combustion systems with cylindrical symmetry breaking
  92. Convective Scaling of Intrinsic Thermo-Acoustic Eigenfrequencies of a Premixed Swirl Combustor
  93. LES Combustion Model With Stretch and Heat Loss Effects for Prediction of Premix Flame Characteristics and Dynamics
  94. Dynamics of unsteady heat transfer in pulsating flow across a cylinder
  95. Shape optimization of a Helmholtz resonator using an adjoint method
  96. Uncertainty encountered when modelling self-excited thermoacoustic oscillations with artificial neural networks
  97. Scattering to Higher Harmonics for Quarter-Wave and Helmholtz Resonators
  98. Application of the Time-Domain Impedance Boundary Condition to Large-Eddy Simulation of Combustion Instability in a Shear-Coaxial High Pressure Combustor
  99. Determination of Acoustic Impedance for Helmholtz Resonators Through Incompressible Unsteady Flow Simulations
  100. Modulation of spray droplet number density and size distribution by an acoustic field
  101. Acoustic and intrinsic thermoacoustic modes of a premixed combustor
  102. Hybrid CFD/low-order modeling of nonlinear thermoacoustic oscillations
  103. An analytical model for the impulse response of laminar premixed flames to equivalence ratio perturbations
  104. Theoretical investigation of the particle response to an acoustic field
  105. Direct Drive Valve Model for Use as an Acoustic Source in a Network Model
  106. Online Monitoring of Thermoacoustic Eigenmodes in Annular Combustion Systems Based on a State-Space Model
  107. Acoustical characteristics of two-phase horizontal intermittent flow through an orifice
  108. Linear State Space Interconnect Modeling of Acoustic Systems
  109. Identification of the heat transfer frequency response in pulsating laminar and subcritical flow across a cylinder
  110. Concurrent identification of aero-acoustic scattering and noise sources at a flow duct singularity in low Mach number flow
  111. Parametric LES/SI Based Aeroacoustic Characterization of Tandem Orifices in Low Mach Number Flows
  112. Tailored Green's Functions for the Prediction of the Noise Generated by Single and Tandem Diaphragms in a Circular Duct
  113. Uncertainty Quantification of Growth Rates of Thermoacoustic Instability by an Adjoint Helmholtz Solver
  114. A systems perspective on non-normality in low-order thermoacoustic models: Full norms, semi-norms and transient growth
  115. Uncertainty Quantification of Growth Rates of Thermoacoustic Instability by an Adjoint Helmholtz Solver
  116. Online Monitoring of Thermoacoustic Eigenmodes in Annular Combustion Systems Based on a State Space Model
  117. On Generation of Entropy Waves by a Premixed Flame
  118. On the robust, flexible and consistent implementation of time domain impedance boundary conditions for compressible flow simulations
  119. Scattering to Higher Harmonics for Quarter Wave and Helmholtz Resonators
  120. Determination of Acoustic Impedance for Helmholtz Resonators Through Incompressible Unsteady Flow Simulations
  121. Propagation and generation of acoustic and entropy waves across a moving flame front
  122. Editorial
  123. Control authority over a combustion instability investigated in CFD
  124. Identification of Sound Sources in Ducted Flows with an LES-SI-DMD Approach: Influence of Mesh Refinement and Subgrid Scale Models
  125. Combined Influence of Strain and Heat Loss on Turbulent Premixed Flame Stabilization
  126. Numerical study on intrinsic thermoacoustic instability of a laminar premixed flame
  127. Influence of Resonators on Rocket Engine Combustion Stability
  128. Distributed time lag response functions for the modelling of combustion dynamics
  129. Intrinsic thermoacoustic instability of premixed flames
  130. Thermal versus acoustic response of velocity sensitive premixed flames
  131. A quasi-one-dimensional model of thermoacoustics in the presence of mean flow
  132. Large-Eddy-Simulation of High-Frequency Flame Dynamics in Perfect Premix Combustors with Elevated Inlet Temperatures
  133. Characterization of Mixing and Flow Properties From Numerical Simulation of Cold Flow in Non-Premixed Combustor
  134. A Quadrature Method of Moments for Polydisperse Flow in Bubble Columns Including Poly-celerity, Breakup and Coalescence
  135. Optimizing thermoacoustic regenerators for maximum amplification of acoustic power
  136. Modeling artifacts in the simulation of the sedimentation of raindrops with a Quadrature Method of Moments
  137. Quantitative comparison of presumed-number-density and quadrature moment methods for the parameterisation of drop sedimentation
  138. IJSCD Special Issue — Editorial
  139. Combustion Stability Analysis of Rocket Engines with Resonators Based on Nyquist Plots
  140. A Grey-Box Identification Approach for Thermoacoustic Network Models
  141. Large Eddy Simulation of ALSTOM’s Reheat Combustor Using Tabulated Chemistry and Stochastic Fields-Combustion Model
  142. Modelling the Formation of Oxides of Nitrogen in Premix Combustion by Extending Tabulated Chemistry With Algebraic Relations
  143. Noise Produced by a Tandem Diaphragm: Experimental and Numerical Investigations
  144. Black-box system identification for reduced order model construction
  145. Experimental and numerical investigation of thermoacoustic sources related to high-frequency instabilities
  146. Quantification of initial-data uncertainty on a shock-accelerated gas cylinder
  147. Impact of acoustic pressure on autoignition and heat release
  148. Erratum
  149. Nonlinear, Proper-Orthogonal-Decomposition-Based Model of Forced Convection Heat Transfer in Pulsating Flow
  150. Quantitative Stability Analysis Using Real-Valued Frequency Response Data
  151. Identification of aero-acoustic scattering matrices from large eddy simulation: Application to whistling orifices in duct
  152. Large Eddy Simulation of Flame Response to Transverse Acoustic Excitation in a Model Reheat Combustor
  153. Novel perspectives on the dynamics of premixed flames
  154. Quantitative Stability Analysis Using Real-Valued Frequency Response Data
  155. Transient two-phase boundary layer modeling for hollow cone sprays
  156. LES based investigation of autoignition in turbulent co-flow configurations
  157. LES of Delft-Jet-In-Hot-Coflow (DJHC) with tabulated chemistry and stochastic fields combustion model
  158. Large Eddy Simulation-Based Study of the Influence of Thermal Boundary Condition and Combustor Confinement on Premix Flame Transfer Functions
  159. Tecnoeconomic Analysis of Medium and Large-sacle Desalination Plants Driven by Concentrated Solar Systems in the Mena Region
  160. Low-Order Analysis of Conjugate Heat Transfer in Pulsating Flow with Fluctuating Temperature
  161. Editorial Note to Professor Culick's Review
  162. Including Heat Loss and Quench Effects in Algebraic Models for Large Eddy Simulation of Premixed Combustion
  163. Large Eddy Simulation of Flame Response to Transverse Acoustic Excitation in a Model Reheat Combustor
  164. LES-Based Study of the Influence of Thermal Boundary Condition and Combustor Confinement on Premix Flame Transfer Functions
  165. Identification of aero-acoustic scattering matrices from large eddy simulation. Application to a sudden area expansion of a duct
  166. Analyzing and modeling the dynamic thermal behaviors of direct contact condensers packed with PCM spheres
  167. Simulation of pure sedimentation of raindrops using quadrature method of moments
  168. Large Eddy Simulation of Autoignition in a Turbulent Hydrogen Jet Flame Using a Progress Variable Approach
  169. Nonlinear identification of unsteady heat transfer of a cylinder in pulsating cross flow
  170. Comparative Validation Study on Identification of Premixed Flame Transfer Function
  171. Large Eddy Simulation of particle-laden swirling flow with a presumed function method of moments
  172. A nonlinear frequency domain model for limit cycles in thermoacoustic systems with modal coupling
  173. A discrete-time, state-space approach for the investigation of non-normal effects in thermoacoustic systems
  174. IJSCD Special Issues — Editorial
  175. Assessing non-normal effects in thermoacoustic systems with mean flow
  176. Performance analysis and optimization of direct contact condensation in a PCM fixed bed regenerator
  177. IJSCD Special Issues — Editorial
  178. Identification of heat transfer dynamics for non-modal analysis of thermoacoustic stability
  179. Some regularization methods for a thermoacoustic inverse problem
  180. Comparative Validation Study on Identification of Premixed Flame Transfer Function
  181. Determination of Acoustic Transfer Matrices via Large Eddy Simulation and System Identification
  182. Flow-Induced Pulsations in Double Closed Branch Systems
  183. An Analytical Solution for Acoustic Wave Propagation in a Narrow Duct with Mean Temperature Gradient
  184. Aeroacoustic Characterization of T-Junctions Based on Large Eddy Simulation and System Identification
  185. Identification of Flame Transfer Functions From LES of a Premixed Swirl Burner
  186. Formulation and Validation of an LES Model for Ternary Mixing and Reaction Based on Joint Presumed Discrete Distributions
  187. Impact of Swirl Fluctuations on the Flame Response of a Perfectly Premixed Swirl Burner
  188. Determination of Acoustic Scattering Coefficients via Large Eddy Simulation and System Identification
  189. Identification of Flame Transfer Functions Using LES of Turbulent Reacting Flows
  190. Cryo-adsorptive hydrogen storage on activated carbon. I: Thermodynamic analysis of adsorption vessels and comparison with liquid and compressed gas hydrogen storage
  191. Cryo-adsorptive hydrogen storage on activated carbon. II: Investigation of the thermal effects during filling at cryogenic temperatures
  192. Modelling and Validation of Covariance Transport Equations for Large-Eddy-Simulation of Ternary, Turbulent Mixing
  193. Comments on solid state hydrogen storage systems design for fuel cell vehicles
  194. Identification of the aeroacoustic response of a low Mach number flow through a T-joint
  195. Dynamics of practical premixed flames, part II: identification and interpretation of CFD data
  196. Dynamics of practical premixed flames, part I: model structure and identification
  197. Self-Sustained Aeroacoustic Oscillations in Multiple Side Branch Pipe Systems
  198. Low-Order Modeling of a Side Branch at Low Mach Numbers
  199. Identification of Heat Transfer Dynamics for Nonmodal Stability Analysis of Thermoacoustic Systems
  200. Impact of Swirl Fluctuations on the Flame Response of a Perfectly Premixed Swirl Burner
  201. Simulation of Ternary Mixing in a Coannular Jet-in-Crossflow
  202. Numerische Simulation von Mehrphasenreaktoren mittels hybridem CFD-Modell in OpenFOAM (HIRES-TFM)
  203. CFD-based application of the Nyquist criterion to thermo-acoustic instabilities
  204. Reconstruction of Acoustic Transfer Matrices from Large-Eddy-Simulations of Compressible Turbulent Flows
  205. A Time-Domain Impedance Boundary Condition for Compressible Turbulent Flow
  206. Impact of Fuel Supply Impedance on Combustion Stability of Gas Turbines
  207. Filter-Based Time-Domain Impedance Boundary Conditions for CFD Applications
  208. Numerical eigenmode analysis of an acoustic-duct system by CFD-OLTF and comparison against experiment
  209. On the low-frequency limit of flame transfer functions
  210. Implementation of the Thickened Flame Model for Large Eddy Simulation of Turbulent Premixed Combustion in a Commercial Solver
  211. Scattering and Generation of Acoustic Energy by a Premix Swirl Burner
  212. Approximation of joint PDFs by discrete distributions generated with Monte Carlo methods
  213. Partially reflecting and non-reflecting boundary conditions for simulation of compressible viscous flow
  214. Modeling of Mixing and Reaction in Turbulent Multi-Phase Flows with Distribution Functions
  215. Thermoacoustic Stability Analysis of an Annular Combustion Chamber With Acoustic Low Order Modeling and Validation Against Experiment
  216. Influence of the Swirler Design on the Flame Transfer Function of Premixed Flames
  217. A MODEL FOR THE THERMOACOUSTIC RESPONSE OF A PREMIXED SWIRL BURNER, PART II: THE FLAME RESPONSE
  218. A MODEL FOR THE THERMOACOUSTIC RESPONSE OF A PREMIXED SWIRL BURNER, PART I: ACOUSTIC ASPECTS
  219. Modellierung von Mischung und Reaktion in turbulenten Mehrphasenströmungen mittels Verteilungsfunktionen
  220. Auto-Ignition and Heat Release in a Gas Turbine Burner at Elevated Temperature
  221. Validation of Flame Transfer Function Reconstruction for Perfectly Premixed Swirl Flames
  222. A Numerical Model of Dispersed Two Phase Flow in Aerated Stirred Vessels based on Presumed Shape Number Density Functions
  223. Order and Realisability of Impulse Response Filters for Accurate Identification of Acoustical Multi-ports from Transient CFD
  224. Bubbly Flows
  225. Combustion Instabilities
  226. Self-tuning regulators for combustion oscillations
  227. Spinning and Azimuthally Standing Acoustic Modes in Annular Combustors
  228. Acoustic Transfer Matrix Reconstruction and Analysis for Ducts with Sudden Change of Area
  229. Assessment of methods for the computation of the linear stability of combustors
  230. A novel method for the computation of the linear stability of combustors
  231. Auto-Ignition in a Gas Turbine Burner at Elevated Temperature
  232. Instability of a Premix Burner With Nonmonotonic Pressure Drop Characteristic
  233. Low-Order Acoustic Modelling for Annular Combustors: Validation and Inclusion of Modal Coupling
  234. Modeling of Inhomogeneously Premixed Combustion With an Extended TFC Model
  235. Measurement of Transfer Matrices and Source Terms of Premixed Flames
  236. Self-induced instability of a premixed jet flame impinging on a plate
  237. RECONSTRUCTION OF ACOUSTIC TRANSFER MATRICES BY INSTATIONARY COMPUTATIONAL FLUID DYNAMICS
  238. Instability of a Premix Burner With Non-Monotonic Pressure Drop Characteristic
  239. Impact of the fuel time lag distribution in elliptical premix nozzles on combustion stability
  240. Sound emission of rotor induced deformations of generator casings
  241. Constructive and Destructive Interference of Acoustic and Entropy Waves in a Premixed Combustor with a Choked Exit
  242. Ignition Delay Time Modulation as a Contribution to Thermo-Acoustic Instability in Sequential Combustion
  243. Modeling of Inhomogeneously Premixed Combustion With an Extended TFC Model
  244. Prediction of Acoustic Pressure Spectra in Combustion Systems Using Swirl Stabilized Gas Turbine Burners
  245. Modeling Transfer Matrices of Premixed Flames and Comparison With Experimental Results
  246. Measurement of Transfer Matrices and Source Terms of Premixed Flames
  247. Investigation of the Thermoacoustic Characteristics of a Lean Premixed Gas Turbine Burner
  248. Optimization of Rate Coefficients for Simplified Reaction Mechanisms with Genetic Algorithms
  249. Structure of locally quenched highly turbulent lean premixed flames
  250. An Efficient Computational Model for Premixed Turbulent Combustion at High Reynolds Numbers Based on a Turbulent Flame Speed Closure
  251. NOx-Abatement Potential of Lean-Premixed GT Combustors
  252. An Efficient Computational Model for Premixed Turbulent Combustion at High Reynolds Numbers Based on a Turbulent Flame Speed Closure
  253. NOx-Abatement Potential of Lean-Premixed GT-Combustors
  254. Low-Nox Premixed Combustion of MBtu Fuels Using the ABB Double Cone Burner (EV Burner)
  255. A NOx Prediction Scheme for Lean-Premixed Gas Turbine Combustion Based on Detailed Chemical Kinetics
  256. A NOxPrediction Scheme for Lean-Premixed Gas Turbine Combustion Based on Detailed Chemical Kinetics
  257. Low NOxPremixed Combustion of MBTU Fuels Using the ABB Double Cone Burner (EV Burner)
  258. Statistics of helicity fluctuations in homogeneous turbulence
  259. The dynamics of helical decaying turbulence
  260. On the mechanism of the reduction of nonlinearity in the incompressible Navier–Stokes equation