All Stories

  1. Laser-scribed graphene nanofiber decorated with oil palm lignin capped silver nanoparticles: a green biosensor
  2. The effect of different electrolytes on the synthesis of graphene sheets by electrochemical exfoliation
  3. Review of the past and recent developments in functionalization of graphene derivatives for reinforcement of polypropylene nanocomposites
  4. Exfoliation of charcoal by electrochemical method to synthesize few layers graphene sheets
  5. Roles of linear alkyl chain alkylation on reinforcement of graphene based polypropylene nanocomposites
  6. Green Synthesis of Silver Nanoparticles Using Hibiscus rosa-sinensis Leaf Extract
  7. Synthesis of Laser Scribed Graphene Electrode with Optimized Power for Biosensing
  8. Optimization and characterization of magnetite–reduced graphene oxide nanocomposites for demulsification of crude oil in water emulsion
  9. Synthesis and Characterization of Alkylated Graphene Oxide (AGO) and Reduced Graphene Oxide (ARGO)
  10. Green synthesis of reduced graphene oxide decorated with iron oxide nanoparticles using Oolong Tea extract
  11. Green synthesis of reduced graphene oxide using green tea extract
  12. Synthesis, characterization and study of graphene oxide
  13. Highly sensitive Escherichia coli shear horizontal surface acoustic wave biosensor with silicon dioxide nanostructures
  14. Comparison on graphite, graphene oxide and reduced graphene oxide: Synthesis and characterization
  15. Fabrication and characterization of spiral interdigitated electrodes based biosensor for salivary glucose detection
  16. Fabrication and characterization on width of spiral interdigitated electrodes based biosensors
  17. Review of the synthesis, transfer, characterization and growth mechanisms of single and multilayer graphene
  18. Synthesis and application of surfactants coated magnetite nanoparticles for demulsification of crude oil in water emulsion
  19. Synthesis of Graphene Oxide using Modified Hummers Method: Solvent Influence
  20. The Impact of Reaction Parameters on Graphene-like Material Synthesized Using Chemical Vapour Deposition
  21. Modelling and Simulation of Rectangular Bundle of Single-Walled Carbon Nanotubes for Antenna Applications
  22. Fabrication of interdigitated high-performance zinc oxide nanowire modified electrodes for glucose sensing
  23. Synthesis of Silicon Carbide Nanowhiskers from Graphite and Silica of Different Ratio by Microwave Irradiation Assisted Synthesis
  24. Characterization of Silicon Carbide Nanowhiskers Synthesized by Microwave Heating Using Photoluminescence Spectroscopy and Fourier Transform Infrared Spectroscopy
  25. A new nano-worm structure from gold-nanoparticle mediated random curving of zinc oxide nanorods
  26. Optical measurements on tailored zinc oxide thin films under optimal
  27. Characterization of Gold-Sputtered Zinc Oxide Nanorods—a Potential Hybrid Material
  28. Effect on Variation of KMnO4 Amount for Production of Graphene Oxide (GO)
  29. Numerical simulation on development of a SAW based biosensor
  30. Effect of annealing temperature on structural, morphological and electrical properties of nanoparticles TiO2 thin films by sol-gel method
  31. Environment friendly route of iron oxide nanoparticles from Zingiber officinale (ginger) root extract
  32. Impact of gate workfunction in junctionless versus junction SOI n-MOSFET transistor
  33. Study of nanoparticles TiO2 thin films on p-type silicon substrate using different alcoholic solvents
  34. Thickness Dependent Nanostructural, Morphological, Optical and Impedometric Analyses of Zinc Oxide-Gold Hybrids: Nanoparticle to Thin Film
  35. Study on Dielectric and Magnetic Properties of MWCNTs/Polyester Composites
  36. A 60 GHz single-walled carbon nanotube composite material for dipole antenna applications
  37. Improved rice husk ash microwave absorber with CNTs
  38. Performance assessment of the simulation modeling approach of SWCNT at THz and GHz antenna applications
  39. Synthesis of Fe3O4 Nanoparticles to Synthesize Bundles of Single-Walled Carbon Nanotubes
  40. The Effect of Chemical Solutions (Isopropyl Alcohol, Dichloromethane, Acetone and Triton X-100) on the Dispersion of Single-Walled Carbon Nanotubes
  41. In-House Development of Shear Horizontal Acoustic Waves Based Sensitive Sensors for Bacterial Pathogens Detection
  42. High Yield Preparation of Graphene Oxide Film Using Improved Hummer’s Technique for Current-Voltage Characteristic
  43. Easy preparation of ultrathin reduced graphene oxide sheets at a high stirring speed
  44. Effect of annealing temperatures on the morphology, optical and electrical properties of TiO2 thin films synthesized by the sol–gel method and deposited on Al/TiO2/SiO2/p-Si
  45. Microwave absorbing material based on rice husk ash/ CNTs composites
  46. Low cost mask layout design for fabrication of spiral interdigitated electrodes in electrochemical biosensor application
  47. Composites Based on Rice Husk Ash/Polyester for Use as Microwave Absorber
  48. Investigation of Rice Husk/CNTs Composites Performance in Microwave Properties
  49. Development of highly sensitive polysilicon nanogap with APTES/GOx based lab-on-chip biosensor to determine low levels of salivary glucose
  50. Effect of isothermal annealing on structural, morphological, optical and electrical properties of N-type TiO2 thin films
  51. Fabrication and characterization of ZnO nanorods by hydrothermal growth process for DNA detection
  52. Fabrication and characterization of ZnO thin film on interdigitated electrode by sol-gel spin coating method for DNA detection
  53. Fabrication of interdigitated electrodes (IDE's) by conventional photolithography technique for pH measurement using micro-gap structure
  54. An investigation of single-walled carbon nanotubes bundle dipole antenna at THz frequencies
  55. Review - coating methods of carbon nanotubes and their potential applications
  56. Fabrication of a CMOS-compatible surface acoustic wave device for application in pathogen sensing
  57. Shear horizontal surface acoustic wave COMSOL modeling on lithium niobate piezoelectric substrate
  58. Investigation of single-wall carbon nanotubes at THz antenna
  59. Synthesis and characterization of graphene and carbon nanotubes: A review on the past and recent developments
  60. Design Development of Acoustic Waves Based Sensitive Sensors for Escherichia coli O157:H7 Detection
  61. Modeling Development of a High-Sensitivity Escherichia coli O157:H7 Detection Based on SH SAW Sensor
  62. Effect of different solvents on the structural and optical properties of zinc oxide thin films for optoelectronic applications
  63. Difference loss tangent layer microwave absorber effect absorption in X-band frequency
  64. A Study on the Effect of Calcination Temperature on the Graphitization of Carbon Nanotubes Synthesized by the Decomposition of Methane
  65. Formation of Carbon Nanotubes from Methane Decomposition: Effect of Concentration of Fe3O4 on the Diameters Distributions
  66. An experimental thickness of microwave absorber effect absorption in Ku-band frequency
  67. Fabrication of silicon nitride ion sensitive field-effect transistor (ISFET)
  68. The effect of phosphate buffer solution (PBS) concentration on the ion sensitive field-effect transistor (ISFET) detection
  69. Precise Alignment of Individual Single-Walled Carbon Nanotube Using Dielectrophoresis Method for Development and Fabrication of pH Sensor
  70. Fabrication of Silicon Nitride Ion Sensitive Field-Effect Transistor for pH Measurement and DNA Immobilization/Hybridization
  71. Synthesis of Single-Walled Carbon Nanotubes: Effects of Active Metals, Catalyst Supports, and Metal Loading Percentage
  72. Carbon nanotubes-based electrochemical biosensors
  73. Design and characteristic of CMOS fabricated acoustic waves based sensors for foodborne pathogen rapid detection
  74. Preparation of iron oxide nanoparticles supported on magnesium oxide for producing high-quality single-walled carbon nanotubes
  75. The effect of carbon precursors (methane, benzene and camphor) on the quality of carbon nanotubes synthesised by the chemical vapour decomposition
  76. Optimisation of reaction conditions for the synthesis of single-walled carbon nanotubes using response surface methodology
  77. Synthesis of single-walled carbon nanotubes by chemical vapor deposition using sodium chloride support
  78. Effect of FeOx loaded on CoOx/Al2O3 catalyst for the formation of thin-walled carbon nanotubes
  79. Effects of FeOx, CoOx, and NiO catalysts and calcination temperatures on the synthesis of single-walled carbon nanotubes through chemical vapor deposition of methane
  80. BROAD BUNDLES OF SINGLE-WALLED CARBON NANOTUBE SYNTHESIZED OVER Fe2O3/MgO VIA CHEMICAL VAPOR DEPOSITION OF METHANE