Contact

All Stories

  1. Hierarchically Porous PVA Aerogel for Leakage-Proof Phase Change Materials with Superior Energy Storage Capacity

    Article • Energy & Fuels, January 2020, American Chemical Society (ACS)

    Prof Wei YANG

  2. Driven by electricity: multilayered GO-Fe3O4@PDA-PAM flake assembled micro flower-like anode for high-performance lithium ion batteries

    Article • Applied Surface Science, January 2020, Elsevier

    Prof Wei YANG

  3. High-efficient crystallization promotion and melt reinforcement effect of diblock PDLA-b-PLLA copolymer on PLLA

    Article • Polymer, January 2020, Elsevier

    Prof Wei YANG

  4. A bridge-arched and layer-structured hollow melamine foam/reduced graphene oxide composite with an enlarged evaporation area and superior thermal insulation for high-performance solar steam generation

    Article • Journal of Materials Chemistry A, January 2020, Royal Society of Chemistry

    Prof Wei YANG

  5. All-weather-available, continuous steam generation based on the synergistic photo-thermal and electro-thermal conversion by MXene-based aerogels

    Article • Materials Horizons, January 2020, Royal Society of Chemistry

    Prof Wei YANG

  6. Decoupling the Polymer Dynamics and the Nanoparticle Network Dynamics of Polymer Nanocomposites through Dielectric Spectroscopy and Rheology

    Article • Macromolecules, December 2019, American Chemical Society (ACS)

    Prof Wei YANG

  7. Core-shell polydopamine@MXene for highly efficient solar-to-vapor generation

    Article • Nano Research, December 2019, Tsinghua University Press

    Prof Wei YANG

  8. Photo-Driven Self-Healing of Arbitrary Nondestructive Damage in Polyethylene-Based Nanocomposites

    Article • ACS Applied Materials & Interfaces, December 2019, American Chemical Society (ACS)

    Prof Wei YANG

  9. Bacterial cellulose/MXene hybrid aerogels for photodriven shape-stabilized composite phase change materials

    Article • Solar Energy Materials and Solar Cells, December 2019, Elsevier

    Prof Wei YANG

  10. Rapid, repeatable, highly sensitive and semi-quantitative colorimetric detection of elemental sulfur with a colored clathrate

    Article • Sensors and Actuators B Chemical, November 2019, Elsevier

    Prof Wei YANG

  11. High actuated performance MWCNT/Ecoflex dielectric elastomer actuators based on layer-by-layer structure

    Article • Composites Part A Applied Science and Manufacturing, October 2019, Elsevier

    Prof Wei YANG

  12. Flexible Anti-Biofouling MXene/Cellulose Fibrous Membrane for Sustainable Solar-Driven Water Purification

    Article • ACS Applied Materials & Interfaces, September 2019, American Chemical Society (ACS)

    Prof Wei YANG

  13. Advanced Graphene@Sulfur composites via an in-situ reduction and wrapping strategy for high energy density lithium–sulfur batteries

    Article • Carbon, September 2019, Elsevier

    Prof Wei YANG

  14. Flexible and Tough Cellulose Nanocrystal/Polycaprolactone Hybrid Aerogel Based on the Strategy of Macromolecule Cross-Linking via Click Chemistry

    Article • ACS Sustainable Chemistry & Engineering, August 2019, American Chemical Society (ACS)

    Prof Wei YANG

  15. Effect of Cross-Linking Degree of EPDM Phase on the Morphology Evolution and Crystallization Behavior of Thermoplastic Vulcanizates Based on Polyamide 6 (PA6)/Ethylene-Propylene-Diene Rubber (EPDM) Blends

    Article • Polymers, August 2019, MDPI AG

    Prof Wei YANG

  16. Hierarchically Porous Hydroxyapatite Hybrid Scaffold Incorporated with Reduced Graphene Oxide for Rapid Bone Ingrowth and Repair

    Article • ACS Nano, August 2019, American Chemical Society (ACS)

    Prof Wei YANG

  17. Electro and Light-Active Actuators Based on Reversible Shape-Memory Polymer Composites with Segregated Conductive Networks

    Article • ACS Applied Materials & Interfaces, July 2019, American Chemical Society (ACS)

    Prof Wei YANG

  18. Effect of the content of β form crystals on biaxially stretched polypropylene microporous membranes and the tuning of pore structures

    Article • Polymer, June 2019, Elsevier

    Prof Wei YANG

  19. Highly sensitive and multifunctional piezoresistive sensor based on polyaniline foam for wearable Human-Activity monitoring

    Article • Composites Part A Applied Science and Manufacturing, June 2019, Elsevier

    Prof Wei YANG

  20. Role of Controlled Diameter of Polyamide 6 (PA6) Fibers on the Formation of Interfacial Hybrid Crystal Morphology in HDPE/PA6 Microfibril Blend

    Article • Industrial & Engineering Chemistry Research, May 2019, American Chemical Society (ACS)

    Prof Wei YANG

  21. Multi-functional carbon integrated rGO-Fe3O4@C composites as porous building blocks to construct anode with high cell capacity and high areal capacity for lithium ion batteries

    Article • Journal of Electroanalytical Chemistry, May 2019, Elsevier

    Prof Wei YANG

  22. Multifunctional Thermal Management Materials with Excellent Heat Dissipation and Generation Capability for Future Electronics

    Article • ACS Applied Materials & Interfaces, April 2019, American Chemical Society (ACS)

    Prof Wei YANG

  23. Enhanced Thermal Conductivity and Balanced Mechanical Performance of PP/BN Composites with 1 vol% Finely Dispersed MWCNTs Assisted by OBC

    Article • Advanced Materials Interfaces, April 2019, Wiley

    Prof Wei YANG

  24. Constructing Sandwich-Architectured Poly(l-lactide)/High-Melting-Point Poly(l-lactide) Nonwoven Fabrics: Toward Heat-Resistant Poly(l-lactide) Barrier Biocomposites with Full Biodegradability

    Article • ACS Applied Bio Materials, February 2019, American Chemical Society (ACS)

    Prof Wei YANG

  25. Highly anisotropic functional conductors fabricated by multi-melt multi-injection molding (M3IM): A synergetic role of multiple melt flows and confined interface

    Article • Composites Science and Technology, February 2019, Elsevier

    Prof Wei YANG

  26. Pore formation mechanism of oriented β polypropylene cast films during stretching and optimization of stretching methods: In-situ SAXS and WAXD studies

    Article • Polymer, February 2019, Elsevier

    Prof Wei YANG

  27. Scalable Synthesis of an Artificial Polydopamine Solid‐Electrolyte‐Interface‐Assisted 3D rGO/Fe 3 O 4 @PDA Hydrogel for a Highly Stable Anode with Enhanced Lithium‐Ion‐Storage Properties

    Article • ChemElectroChem, January 2019, Wiley

    Prof Wei YANG

  28. Dopamine-induced functionalization of cellulose nanocrystals with polyethylene glycol towards poly(L-lactic acid) bionanocomposites for green packaging

    Article • Carbohydrate Polymers, January 2019, Elsevier

    Prof Wei YANG

  29. High-performance composite phase change materials for energy conversion based on macroscopically three-dimensional structural materials

    Article • Materials Horizons, January 2019, Royal Society of Chemistry

    Prof Wei YANG

  30. Macroporous three-dimensional MXene architectures for highly efficient solar steam generation

    Article • Journal of Materials Chemistry A, January 2019, Royal Society of Chemistry

    Prof Wei YANG

  31. Multilayer structured AgNW/WPU-MXene fiber strain sensors with ultrahigh sensitivity and a wide operating range for wearable monitoring and healthcare

    Article • Journal of Materials Chemistry A, January 2019, Royal Society of Chemistry

    Prof Wei YANG

  32. Nanoscale Morphology, Interfacial Hydrogen Bonding, Confined Crystallization and Greatly Improved Toughness of Polyamide 12/Polyketone Blends

    Article • Nanomaterials, November 2018, MDPI AG

    Prof Wei YANG

  33. Human Skin-Inspired Electronic Sensor Skin with Electromagnetic Interference Shielding for the Sensation and Protection of Wearable Electronics

    Article • ACS Applied Materials & Interfaces, November 2018, American Chemical Society (ACS)

    Prof Wei YANG

  34. Diverse interfacial crystalline morphologies induced by poly (d-lactide) (PDLA) melt penetration process in multi-melt multi-injection molding (M3IM) system

    Article • Composites Part B Engineering, November 2018, Elsevier

    Prof Wei YANG

  35. Enhanced performance of porous silicone-based dielectric elastomeric composites by low filler content of Ag@SiO2 Core-Shell nanoparticles

    Article • Nanocomposites, October 2018, Taylor & Francis

    Prof Wei YANG

  36. Electrically insulating, layer structured SiR/GNPs/BN thermal management materials with enhanced thermal conductivity and breakdown voltage

    Article • Composites Science and Technology, October 2018, Elsevier

    Prof Wei YANG

  37. Hierarchical unidirectional graphene aerogel/polyaniline composite for high performance supercapacitors

    Article • Journal of Power Sources, September 2018, Elsevier

    Prof Wei YANG

  38. High-performance porous polylactide stereocomplex crystallite scaffolds prepared by solution blending and salt leaching

    Article • Materials Science and Engineering C, September 2018, Elsevier

    Prof Wei YANG

  39. Multi-dimensional strain sensor based on carbon nanotube film with aligned conductive networks

    Article • Composites Science and Technology, September 2018, Elsevier

    Prof Wei YANG

  40. Oriented polypropylene cast films consisted of β-transcrystals induced by the nucleating agent self-assembly and its homogeneous membranes with high porosity

    Article • Polymer, August 2018, Elsevier

    Prof Wei YANG

  41. Tunable wrinkle structure formed on surface of polydimethylsiloxane microspheres

    Article • European Polymer Journal, July 2018, Elsevier

    Prof Wei YANG

  42. Progress in polyketone materials: blends and composites

    Article • Polymer International, June 2018, Wiley

    Prof Wei YANG

  43. Tailoring Crystalline Morphology by High-Efficiency Nucleating Fiber: Toward High-Performance Poly(l-lactide) Biocomposites

    Article • ACS Applied Materials & Interfaces, May 2018, American Chemical Society (ACS)

    Prof Wei YANG

  44. Effect of temperature, crystallinity and molecular chain orientation on the thermal conductivity of polymers: a case study of PLLA

    Article • Journal of Materials Science, April 2018, Springer Science + Business Media

    Prof Wei YANG

  45. Photodriven Shape-Stabilized Phase Change Materials with Optimized Thermal Conductivity by Tailoring the Microstructure of Hierarchically Ordered Hybrid Porous Scaffolds

    Article • ACS Sustainable Chemistry & Engineering, March 2018, American Chemical Society (ACS)

    Prof Wei YANG

  46. A particular interfacial strategy in PVDF/OBC/MWCNT nanocomposites for high dielectric performance and electromagnetic interference shielding

    Article • Composites Part A Applied Science and Manufacturing, February 2018, Elsevier

    Prof Wei YANG

  47. 2D end-to-end carbon nanotube conductive networks in polymer nanocomposites: a conceptual design to dramatically enhance the sensitivities of strain sensors

    Article • Nanoscale, January 2018, Royal Society of Chemistry

    Prof Wei YANG

  48. Effect of phase coarsening under melt annealing on the electrical performance of polymer composites with a double percolation structure

    Article • Physical Chemistry Chemical Physics, January 2018, Royal Society of Chemistry

    Prof Wei YANG

  49. High efficiency electrochemical reduction of CO2 beyond the two-electron transfer pathway on grain boundary rich ultra-small SnO2 nanoparticles

    Article • Journal of Materials Chemistry A, January 2018, Royal Society of Chemistry

    Prof Wei YANG

  50. Hybrid network structure of boron nitride and graphene oxide in shape-stabilized composite phase change materials with enhanced thermal conductivity and light-to-electric energy conversion capability

    Article • Solar Energy Materials and Solar Cells, January 2018, Elsevier

    Prof Wei YANG

  51. Cryo-mediated exfoliation and fracturing of layered materials into 2D quantum dots

    Article • Science Advances, December 2017, American Association for the Advancement of Science

    Prof Wei YANG

  52. A Facile Route to Fabricate Highly Anisotropic Thermally Conductive Elastomeric POE/NG Composites for Thermal Management

    Article • Advanced Materials Interfaces, November 2017, Wiley

    Prof Wei YANG

  53. Electrically insulating POE/BN elastomeric composites with high through-plane thermal conductivity fabricated by two-roll milling and hot compression

    Article • Advanced Composites and Hybrid Materials, November 2017, Springer Science + Business Media

    Prof Wei YANG

  54. Tailoring co-continuous like morphology in blends with highly asymmetric composition by MWCNTs: Towards biodegradable high-performance electrical conductive poly(l-lactide)/poly(3-hydroxybutyrate-co-4-hydroxybutyrate) blends

    Article • Composites Science and Technology, November 2017, Elsevier

    Prof Wei YANG

  55. A Green and Facile Melt Approach for Hierarchically Porous Polylactide Monoliths Based on Stereocomplex Crystallite Network

    Article • ACS Sustainable Chemistry & Engineering, August 2017, American Chemical Society (ACS)

    Prof Wei YANG

  56. Largely enhanced thermal conductivity of poly (ethylene glycol)/boron nitride composite phase change materials for solar-thermal-electric energy conversion and storage with very low content of graphene nanoplatelets

    Article • Chemical Engineering Journal, May 2017, Elsevier

    Prof Wei YANG

  57. Constructing a special ‘sosatie’ structure to finely dispersing MWCNT for enhanced electrical conductivity, ultra-high dielectric performance and toughness of iPP/OBC/MWCNT nanocomposites

    Article • Composites Science and Technology, February 2017, Elsevier

    Prof Wei YANG

  58. Selective distribution and migration of carbon nanotubes enhanced electrical and mechanical performances in polyolefin elastomers

    Article • Polymer, February 2017, Elsevier

    Prof Wei YANG

  59. Self-Assembled Sponge-like Chitosan/Reduced Graphene Oxide/Montmorillonite Composite Hydrogels without Cross-Linking of Chitosan for Effective Cr(VI) Sorption

    Article • ACS Sustainable Chemistry & Engineering, January 2017, American Chemical Society (ACS)

    Prof Wei YANG

  60. Self-assembled high-strength hydroxyapatite/graphene oxide/chitosan composite hydrogel for bone tissue engineering

    Article • Carbohydrate Polymers, January 2017, Elsevier

    Prof Wei YANG

  61. Excellent mechanical performance and enhanced dielectric properties of OBC/SiO2 elastomeric nanocomposites: effect of dispersion of the SiO2 nanoparticles

    Article • RSC Advances, January 2017, Royal Society of Chemistry

    Prof Wei YANG

  62. Hierarchically interconnected porous scaffolds for phase change materials with improved thermal conductivity and efficient solar-to-electric energy conversion

    Article • Nanoscale, January 2017, Royal Society of Chemistry

    Prof Wei YANG

  63. Correction: High-melting-point crystals of poly(l-lactic acid) (PLLA): the most efficient nucleating agent to enhance the crystallization of PLLA

    Article • CrystEngComm, January 2017, Royal Society of Chemistry

    Prof Wei YANG

  64. Self-assembled nano-leaf/vein bionic structure of TiO2/MoS2 composites for photoelectric sensors

    Article • Nanoscale, January 2017, Royal Society of Chemistry

    Prof Wei YANG

  65. Supercooling-dependent morphology evolution of an organic nucleating agent in poly(l-lactide)/poly(d-lactide) blends

    Article • CrystEngComm, January 2017, Royal Society of Chemistry

    Prof Wei YANG

  66. The effect of chain mobility on the coarsening process of co-continuous, immiscible polymer blends under quiescent melt annealing

    Article • Physical Chemistry Chemical Physics, January 2017, Royal Society of Chemistry

    Prof Wei YANG

  67. Hierarchical graphene foam-based phase change materials with enhanced thermal conductivity and shape stability for efficient solar-to-thermal energy conversion and storage

    Article • Nano Research, December 2016, Tsinghua University Press

    Prof Wei YANG

  68. Role of carbon nanotube grafted poly(l-lactide)-block-poly(d-lactide) in the crystallization of poly(l-lactic acid)/poly(d-lactic acid) blends: Suppressed homocrystallization and enhanced stereocomplex crystallization

    Article • European Polymer Journal, October 2016, Elsevier

    Prof Wei YANG

  69. Effects of Fe3O4 loading on the cycling performance of Fe3O4/rGO composite anode material for lithium ion batteries

    Article • Journal of Alloys and Compounds, September 2016, Elsevier

    Prof Wei YANG

  70. Low percolation threshold and balanced electrical and mechanical performances in polypropylene/carbon black composites with a continuous segregated structure

    Article • Composites Part B Engineering, August 2016, Elsevier

    Prof Wei YANG

  71. Effect of chain entanglement on the melt-crystallization behavior of poly(l-lactide) acid

    Article • Journal of Polymer Research, July 2016, Springer Science + Business Media

    Prof Wei YANG

  72. Facile Method to Fabricate Highly Thermally Conductive Graphite/PP Composite with Network Structures

    Article • ACS Applied Materials & Interfaces, July 2016, American Chemical Society (ACS)

    Prof Wei YANG

  73. Unique crystallization behaviors of isotactic polypropylene in the presence of MWCNT supported β nucleating agent: Lower temperature T(αβ)-T(βα) interval and fast cooling preferred formation of β crystals

    Article • Polymer, July 2016, Elsevier

    Prof Wei YANG

  74. Conductive thermoplastic vulcanizates (TPVs) based on polypropylene (PP)/ethylene-propylene-diene rubber (EPDM) blend: From strain sensor to highly stretchable conductor

    Article • Composites Science and Technology, May 2016, Elsevier

    Prof Wei YANG

  75. Carbon Nanotube Grafted Poly(l-lactide)-block-poly(d-lactide) and Its Stereocomplexation with Poly(lactide)s: The Nucleation Effect of Carbon Nanotubes

    Article • ACS Sustainable Chemistry & Engineering, April 2016, American Chemical Society (ACS)

    Prof Wei YANG

  76. Hybrid graphene aerogels/phase change material composites: Thermal conductivity, shape-stabilization and light-to-thermal energy storage

    Article • Carbon, April 2016, Elsevier

    Prof Wei YANG

  77. An ice-templated assembly strategy to construct graphene oxide/boron nitride hybrid porous scaffolds in phase change materials with enhanced thermal conductivity and shape stability for light–thermal–electric energy conversion

    Article • Journal of Materials Chemistry A, January 2016, Royal Society of Chemistry

    Prof Wei YANG

  78. Effect of cross-linking degree of EPDM phase on the electrical properties and formation of dual networks of thermoplastic vulcanizate composites based on isotactic polypropylene (iPP)/ethylene–propylene–diene rubber (EPDM) blends

    Article • RSC Advances, January 2016, Royal Society of Chemistry

    Prof Wei YANG

  79. Highly thermally conductive UHMWPE/graphite composites with segregated structures

    Article • RSC Advances, January 2016, Royal Society of Chemistry

    Prof Wei YANG

  80. Novel photodriven composite phase change materials with bioinspired modification of BN for solar-thermal energy conversion and storage

    Article • Journal of Materials Chemistry A, January 2016, Royal Society of Chemistry

    Prof Wei YANG

  81. Solvent-controlled formation of a reduced graphite oxide gel via hydrogen bonding

    Article • RSC Advances, January 2016, Royal Society of Chemistry

    Prof Wei YANG

  82. Enhanced comprehensive performance of polyethylene glycol based phase change material with hybrid graphene nanomaterials for thermal energy storage

    Article • Carbon, July 2015, Elsevier

    Prof Wei YANG

  83. Enhancing Thermomechanical Properties and Heat Distortion Resistance of Poly(l-lactide) with High Crystallinity under High Cooling Rate

    Article • ACS Sustainable Chemistry & Engineering, March 2015, American Chemical Society (ACS)

    Prof Wei YANG

  84. Temperature: a nonnegligible factor for the formation of a structurally stable, self-assembled reduced graphite oxide hydrogel

    Article • RSC Advances, January 2015, Royal Society of Chemistry

    Prof Wei YANG

  85. A new approach to construct segregated structures in thermoplastic polyolefin elastomers towards improved conductive and mechanical properties

    Article • Journal of Materials Chemistry A, January 2015, Royal Society of Chemistry

    Prof Wei YANG

  86. Temperature induced gelation transition of a fumed silica/PEG shear thickening fluid

    Article • RSC Advances, January 2015, Royal Society of Chemistry

    Prof Wei YANG

  87. High-melting-point crystals of poly(l-lactic acid) (PLLA): the most efficient nucleating agent to enhance the crystallization of PLLA

    Article • CrystEngComm, January 2015, Royal Society of Chemistry

    Prof Wei YANG

  88. Polymorphism of a high-molecular-weight racemic poly(l-lactide)/poly(d-lactide) blend: effect of melt blending with poly(methyl methacrylate)

    Article • RSC Advances, January 2015, Royal Society of Chemistry

    Prof Wei YANG

  89. Balanced strength and ductility improvement of in situ crosslinked polylactide/poly(ethylene terephthalate glycol) blends

    Article • RSC Advances, January 2015, Royal Society of Chemistry

    Prof Wei YANG

  90. Enantiomeric poly(d-lactide) with a higher melting point served as a significant nucleating agent for poly(l-lactide)

    Article • CrystEngComm, January 2015, Royal Society of Chemistry

    Prof Wei YANG

  91. An extremely uniform dispersion of MWCNTs in olefin block copolymers significantly enhances electrical and mechanical performances

    Article • Polymer Chemistry, January 2015, Royal Society of Chemistry

    Prof Wei YANG

  92. Suppressing phase coarsening in immiscible polymer blends using nano-silica particles located at the interface

    Article • RSC Advances, January 2015, Royal Society of Chemistry

    Prof Wei YANG

  93. Crystallization kinetics of γ phase poly(vinylidene fluoride)(PVDF) induecd by tetrabutylammonium bisulfate

    Article • Journal of Polymer Research, November 2014, Springer Science + Business Media

    Prof Wei YANG

  94. Suppressing phase retraction and coalescence of co-continuous polymer blends: effect of nanoparticles and particle network

    Article • RSC Advances, September 2014, Royal Society of Chemistry

    Prof Wei YANG

  95. Enhanced Formation of Stereocomplex Crystallites of High Molecular Weight Poly(l-lactide)/Poly(d-lactide) Blends from Melt by Using Poly(ethylene glycol)

    Article • ACS Sustainable Chemistry & Engineering, August 2014, American Chemical Society (ACS)

    Prof Wei YANG

  96. A high-performance temperature sensitive TPV/CB elastomeric composite with balanced electrical and mechanical properties via PF-induced dynamic vulcanization

    Article • Journal of Materials Chemistry A, August 2014, Royal Society of Chemistry

    Prof Wei YANG

  97. Induced Formation of Dominating Polar Phases of Poly(vinylidene fluoride): Positive Ion–CF2 Dipole or Negative Ion–CH2 Dipole Interaction

    Article • The Journal of Physical Chemistry B, July 2014, American Chemical Society (ACS)

    Prof Wei YANG

  98. Morphology, interfacial and mechanical properties of polylactide/poly(ethylene terephthalate glycol) blends compatibilized by polylactide-g-maleic anhydride

    Article • Materials & Design (1980-2015), July 2014, Elsevier

    Prof Wei YANG

  99. Polyethylene glycol based shape-stabilized phase change material for thermal energy storage with ultra-low content of graphene oxide

    Article • Solar Energy Materials and Solar Cells, April 2014, Elsevier

    Prof Wei YANG

  100. Contribution of residual solvent to the nucleation and reinforcement of poly (vinylidene fluoride)

    Article • Polymer Testing, April 2014, Elsevier

    Prof Wei YANG

  101. Induced formation of polar phases in poly(vinylidene fluoride) by cetyl trimethyl ammonium bromide

    Article • Journal of Materials Science, February 2014, Springer Science + Business Media

    Prof Wei YANG

  102. Stereocomplex Crystallite Network in Asymmetric PLLA/PDLA Blends: Formation, Structure, and Confining Effect on the Crystallization Rate of Homocrystallites

    Article • Macromolecules, February 2014, American Chemical Society (ACS)

    Prof Wei YANG

  103. Suppression of phase coarsening in immiscible, co-continuous polymer blends under high temperature quiescent annealing

    Article • Soft Matter, January 2014, Royal Society of Chemistry

    Prof Wei YANG

  104. Synergistic effect of stereocomplex crystals and shear flow on the crystallization rate of poly(l-lactic acid): A rheological study

    Article • RSC Advances, January 2014, Royal Society of Chemistry

    Prof Wei YANG

  105. Towards balanced strength and toughness improvement of isotactic polypropylene nanocomposites by surface functionalized graphene oxide

    Article • Journal of Materials Chemistry A, January 2014, Royal Society of Chemistry

    Prof Wei YANG

  106. Effect of graphite oxide structure on the formation of stable self-assembled conductive reduced graphite oxide hydrogel

    Article • Journal of Materials Chemistry C, January 2014, Royal Society of Chemistry

    Prof Wei YANG

  107. Nanoparticle retarded shape relaxation of dispersed droplets in polymer blends: an understanding from the viewpoint of molecular movement

    Article • RSC Advances, January 2014, Royal Society of Chemistry

    Prof Wei YANG

  108. Reinforcement and plasticization of PMMA grafted MWCNTs for PVDF composites

    Article • Composites Part B Engineering, October 2013, Elsevier

    Prof Wei YANG

  109. Toughening of polypropylene with β-nucleated thermoplastic vulcanizates based on polypropylene/ethylene–propylene–diene rubber blends

    Article • Materials & Design (1980-2015), October 2013, Elsevier

    Prof Wei YANG

  110. Greatly accelerated crystallization of poly(lactic acid): cooperative effect of stereocomplex crystallites and polyethylene glycol

    Article • Colloid & Polymer Science, September 2013, Springer Science + Business Media

    Prof Wei YANG

  111. Insight into the nucleating and reinforcing efficiencies of carbon nanofillers in poly(vinylidene fluoride): a comparison between carbon nanotubes and carbon black

    Article • Journal of Materials Science, August 2013, Springer Science + Business Media

    Prof Wei YANG

  112. A RHEOLOGICAL STUDY ON THE CHAIN INTERDIFFUSION OF MISCIBLE POLYMER MELTS

    Article • Acta Polymerica Sinica, April 2013, China Science Publishing & Media Ltd.

    Prof Wei YANG

  113. Polymorphism of Racemic Poly(l-lactide)/Poly(d-lactide) Blend: Effect of Melt and Cold Crystallization

    Article • The Journal of Physical Chemistry B, March 2013, American Chemical Society (ACS)

    Prof Wei YANG

  114. Electrical properties and morphology of carbon black filled PP/EPDM blends: effect of selective distribution of fillers induced by dynamic vulcanization

    Article • Journal of Materials Science, March 2013, Springer Science + Business Media

    Prof Wei YANG

  115. Deformation-induced structure evolution of oriented β-polypropylene during uniaxial stretching

    Article • Polymer, February 2013, Elsevier

    Prof Wei YANG

  116. Effect of nano-silica on the phase inversion behavior of immiscible PA6/ABS blends

    Article • Polymer Testing, February 2013, Elsevier

    Prof Wei YANG

  117. Unusual hierarchical structures of mini-injection molded isotactic polypropylene/ultrahigh molecular weight polyethylene blends

    Article • European Polymer Journal, February 2013, Elsevier

    Prof Wei YANG

  118. Tuning the structure of graphene oxide and the properties of poly(vinyl alcohol)/graphene oxide nanocomposites by ultrasonication

    Article • Journal of Materials Chemistry A, January 2013, Royal Society of Chemistry

    Prof Wei YANG

  119. Role of poly(lactic acid) in the phase transition of poly(vinylidene fluoride) under uniaxial stretching

    Article • Journal of Applied Polymer Science, December 2012, Wiley

    Prof Wei YANG

  120. Evolution of agglomerate structure of carbon nanotubes in multi-walled carbon nanotubes/polymer composite melt: A rheo-electrical study

    Article • Composites Part B Engineering, December 2012, Elsevier

    Prof Wei YANG

  121. Stereocomplex formation of high-molecular-weight polylactide: A low temperature approach

    Article • Polymer, November 2012, Elsevier

    Prof Wei YANG

  122. Functionalized graphene oxide with ethylenediamine and 1,6-hexanediamine

    Article • New Carbon Materials, October 2012, Elsevier

    Prof Wei YANG

  123. Effect of annealing temperature on the mechanical properties, thermal behavior and morphology of β-iPP/PA6 blends

    Article • Materials & Design (1980-2015), September 2012, Elsevier

    Prof Wei YANG

  124. Study on Amino-functionalized Graphene Oxide/Poly(methyl methacrylate) Nanocomposites

    Article • Chemistry Letters, July 2012, The Chemical Society of Japan

    Prof Wei YANG

  125. A comparison of melt and solution mixing on the dispersion of carbon nanotubes in a poly(vinylidene fluoride) matrix

    Article • Composites Part B Engineering, April 2012, Elsevier

    Prof Wei YANG

  126. MWCNTs Supported N,N′-Dicyclohexyl-1,5-diamino-2,6-naphthalenedicarboxamide: A Novel β-Nucleating Agent for Polypropylene

    Article • Journal of Macromolecular Science Part B, March 2012, Taylor & Francis

    Prof Wei YANG

  127. Effect of temperature and time on the exfoliation and de-oxygenation of graphite oxide by thermal reduction

    Article • Journal of Materials Science, March 2012, Springer Science + Business Media

    Prof Wei YANG

  128. Morphologies of injection molded isotactic polypropylene/ultra high molecular weight polyethylene blends

    Article • Materials & Design (1980-2015), March 2012, Elsevier

    Prof Wei YANG

  129. Control of morphology and properties by the selective distribution of nano-silica particles with different surface characteristics in PA6/ABS blends

    Article • Journal of Materials Science, February 2012, Springer Science + Business Media

    Prof Wei YANG

  130. Crystallization, rheological behavior and mechanical properties of poly(vinylidene fluoride) composites containing graphitic fillers: a comparative study

    Article • Polymer International, February 2012, Wiley

    Prof Wei YANG

  131. Crystallization and reinforcement of poly (vinylidene fluoride) nanocomposites: Role of high molecular weight resin and carbon nanotubes

    Article • Polymer Testing, February 2012, Elsevier

    Prof Wei YANG

  132. Influence of multiwall carbon nanotubes on the morphology, melting, crystallization and mechanical properties of polyamide 6/acrylonitrile–butadiene–styrene blends

    Article • Materials & Design (1980-2015), February 2012, Elsevier

    Prof Wei YANG

  133. A rheological study on temperature dependent microstructural changes of fumed silica gels in dodecane

    Article • Soft Matter, January 2012, Royal Society of Chemistry

    Prof Wei YANG

  134. Toughening of polyamide 6 with β-nucleated thermoplastic vulcanizates based on polypropylene/ethylene–propylene–diene rubber grafted with maleic anhydride blends

    Article • Materials & Design (1980-2015), January 2012, Elsevier

    Prof Wei YANG

  135. Melt viscoelasticity, electrical conductivity, and crystallization of PVDF/MWCNT composites: Effect of the dispersion of MWCNTs

    Article • Journal of Applied Polymer Science, December 2011, Wiley

    Prof Wei YANG

  136. A thermal method for quantitatively determinating the content of short chain branching in ethylene/α-olefin copolymers

    Article • Journal of Thermal Analysis and Calorimetry, November 2011, Springer Science + Business Media

    Prof Wei YANG

  137. Deformation-induced morphology evolution during uniaxial stretching of isotactic polypropylene: effect of temperature

    Article • Colloid & Polymer Science, November 2011, Springer Science + Business Media

    Prof Wei YANG

  138. Structure of fumed silica gels in dodecane: enhanced network by oscillatory shear

    Article • Colloid & Polymer Science, October 2011, Springer Science + Business Media

    Prof Wei YANG

  139. Effect of carbon nanotube-supported β nucleating agent on the thermal properties, morphology, and mechanical properties of polyamide 6/isotactic polypropylene blends

    Article • Journal of Applied Polymer Science, October 2011, Wiley

    Prof Wei YANG

  140. Structure and Properties of Radiation Cross-Linked Polypropylene Foam

    Article • Polymer-Plastics Technology and Engineering, July 2011, Taylor & Francis

    Prof Wei YANG

  141. Injection Molding Shrinkage and Mechanical Properties of Polypropylene Blends

    Article • Journal of Macromolecular Science Part B, June 2011, Taylor & Francis

    Prof Wei YANG

  142. Interfacial interaction of polyvinylidene fluoride/multiwalled carbon nanotubes nanocomposites: A rheological study

    Article • Journal of Applied Polymer Science, March 2011, Wiley

    Prof Wei YANG

  143. Mechanical and thermal characteristics and morphology of polyamide 6/isotactic polypropylene blends in the presence of a β-nucleating agent

    Article • Journal of Applied Polymer Science, February 2011, Wiley

    Prof Wei YANG

  144. Aggregate of nanoparticles: rheological and mechanical properties

    Article • Nanoscale Research Letters, January 2011, Springer Science + Business Media

    Prof Wei YANG

  145. Characteristic Shear Rate for Nonlinear Viscoelastic Behavior in a Polydisperse Polymer Solution

    Article • Journal of Macromolecular Science Part B, November 2010, Taylor & Francis

    Prof Wei YANG

  146. Hierarchical Distribution of β-Phase in Compression- and Injection-Molded, Polypropylene-Based TPV

    Article • Journal of Macromolecular Science Part B, November 2010, Taylor & Francis

    Prof Wei YANG

  147. Crystallization behavior of poly (vinylidene fluoride)/multi-walled carbon nanotubes nanocomposites

    Article • Journal of Materials Science, October 2010, Springer Science + Business Media

    Prof Wei YANG

  148. Effect of repetitive processing on the mechanical properties and fracture toughness of dynamically vulcanized iPP/EPDM blends

    Article • Journal of Applied Polymer Science, October 2010, Wiley

    Prof Wei YANG

  149. Studies on the Blends of Polyamide66 and Thermoplastic Polyimide

    Article • Journal of Macromolecular Science Part B, June 2010, Taylor & Francis

    Prof Wei YANG

  150. Multiple melting behaviour of annealed crystalline polymers

    Article • Polymer Testing, April 2010, Elsevier

    Prof Wei YANG

  151. The enhanced nucleating ability of carbon nanotube-supported β-nucleating agent in isotactic polypropylene

    Article • Colloid & Polymer Science, February 2010, Springer Science + Business Media

    Prof Wei YANG

  152. Effect of temperature gradient on the development of β phase polypropylene in dynamically vulcanized PP/EPDM blends

    Article • Colloid & Polymer Science, August 2009, Springer Science + Business Media

    Prof Wei YANG

  153. Dynamic Rheological Behavior of Copolymerized Linear Low-Density Polyethylenes: Effect of Molecular Weight and Its Distribution

    Article • Journal of Macromolecular Science Part B, July 2009, Taylor & Francis

    Prof Wei YANG

  154. Investigation on Tensile Deformation Behavior of Semi-Crystalline Polymers

    Article • Journal of Macromolecular Science Part B, July 2009, Taylor & Francis

    Prof Wei YANG

  155. Heterogeneous dispersion of the compatibilizer in the injection molding of polyamide 6/polypropylene blends

    Article • Journal of Applied Polymer Science, July 2009, Wiley

    Prof Wei YANG

  156. Effect of spatial confinement on the development of β phase of polypropylene

    Article • Polymer, July 2009, Elsevier

    Prof Wei YANG

  157. Effect of Injection Parameters and Addition of Nanoscale Materials on the Shrinkage of Polypropylene Copolymer

    Article • Journal of Macromolecular Science Part B, May 2009, Taylor & Francis

    Prof Wei YANG

  158. Double yielding in PA6/TPV-MAH blends: Effect of crosslinking degree of the dispersed phase

    Article • Journal of Polymer Science Part B Polymer Physics, May 2009, Wiley

    Prof Wei YANG

  159. Effect of β-phase on the fracture behavior of dynamically vulcanized PP/EPDM blends studied by the essential work of fracture approach

    Article • European Polymer Journal, May 2009, Elsevier

    Prof Wei YANG

  160. Crystalline morphology of β-nucleated controlled-rheology polypropylene

    Article • Polymer Testing, August 2008, Elsevier

    Prof Wei YANG

  161. Continuous extrusion and tensile strength of self-reinforced HDPE/UHMWPE sheet

    Article • Journal of Materials Processing Technology, June 2008, Elsevier

    Prof Wei YANG

  162. Effect of α- and β-nucleating agents on the fracture behavior of polypropylene-co-ethylene

    Article • Journal of Applied Polymer Science, January 2008, Wiley

    Prof Wei YANG

  163. Double yielding in PA6/TPV–MAH blends: Effect of dispersed phase with different content, modulus

    Article • Polymer, November 2007, Elsevier

    Prof Wei YANG

  164. Effect of temperature and strain rate on the tensile deformation of polyamide 6

    Article • Polymer, May 2007, Elsevier

    Prof Wei YANG

  165. Double yielding in PA6: Effect of mold temperature and moisture content

    Article • Journal of Polymer Science Part B Polymer Physics, January 2007, Wiley

    Prof Wei YANG

  166. Structures and properties of blown moulding LLDPE films

    Article • Plastics Rubber and Composites Macromolecular Engineering, November 2006, Taylor & Francis

    Prof Wei YANG

  167. Essential work of fracture of glass bead filled low density polyethylene

    Article • Journal of Materials Science, October 2005, Springer Science + Business Media

    Prof Wei YANG

  168. Study on the melt flow behavior of glass bead filled polypropylene

    Article • Polymer Testing, June 2005, Elsevier

    Prof Wei YANG

  169. Essential work of fracture evaluation of fracture behavior of glass bead filled linear low-density polyethylene

    Article • Journal of Applied Polymer Science, January 2005, Wiley

    Prof Wei YANG

  170. Mechanical Properties of Glass Bead-Filled Linear Low-Density Polyethylene

    Article • Journal of Elastomers & Plastics, July 2004, SAGE Publications

    Prof Wei YANG

  171. Review on auxetic materials

    Article • Journal of Materials Science, May 2004, Springer Science + Business Media

    Prof Wei YANG

  172. Stress-induced crystallization of biaxially oriented polypropylene

    Article • Journal of Applied Polymer Science, May 2003, Wiley

    Prof Wei YANG