All Stories

  1. Simulation of a hydrogen/natural gas engine and modelling of engine operating parameters

    Article • International Journal of Hydrogen Energy, March 2018, Elsevier

    Dr Wan Mohd Faizal Wan Mahmood

  2. Compressed Natural Gas Direct Injection: Comparison Between Homogeneous and Stratified Combustion

    Article • August 2017, IntechOpen

    Dr Wan Mohd Faizal Wan Mahmood

  3. Application of Taguchi method in optimization of design parameter for turbocharger vaned diffuser

    Article • Industrial Lubrication and Tribology, May 2017, Emerald

    Dr Wan Mohd Faizal Wan Mahmood

  4. Comparison of Simple and Detailed Soot Models in the Study of Soot Formation in a Compression Ignition Diesel Engine

    Article • March 2017, SAE International

    Dr Wan Mohd Faizal Wan Mahmood

  5. Experimental Investigation of Performance and Emissions of a Stratified Charge CNG Direct Injection Engine with Turbocharger

    Article • MATEC Web of Conferences, January 2017, EDP Sciences

    Dr Wan Mohd Faizal Wan Mahmood

  6. Numerical investigation of soot mass concentration in compression ignition diesel engine

    Article • JOURNAL OF MECHANICAL ENGINEERING AND SCIENCES, December 2016, Universiti Malaysia Pahang Publisher

    Dr Wan Mohd Faizal Wan Mahmood

  7. An experimental study of the performance and emissions of spark ignition gasoline engine

    Article • International Journal of Automotive and Mechanical Engineering, December 2016, Universiti Malaysia Pahang Publisher

    Dr Wan Mohd Faizal Wan Mahmood

  8. Numerical investigation on soot particles emission in compression ignition diesel engine by using particulate mimic soot model

    Article • MATEC Web of Conferences, December 2016, EDP Sciences

    Dr Wan Mohd Faizal Wan Mahmood

  9. Investigation of diesel-ethanol blended fuel properties with palm methyl ester as co-solvent and blends enhancer

    Article • MATEC Web of Conferences, December 2016, EDP Sciences

    Dr Wan Mohd Faizal Wan Mahmood

  10. Incorporating logistic costs into a single vendor–buyer JELS model

    Article • Applied Mathematical Modelling, December 2016, Elsevier

    Dr Wan Mohd Faizal Wan Mahmood

  11. PERFORMANCE OF SOLAR-ASSISTED ABSORPTION CYCLE AIR CONDITIONING SYSTEM

    Article • Jurnal Teknologi (Sciences & Engineering), October 2016, Penerbit UTM Press

    Dr Wan Mohd Faizal Wan Mahmood

  12. Simulation of the Effect of Initial Temperature and Fuel Injection Pressure on Hydrogen Combustion Characteristics in Argon-Oxygen Compression Ignition Engine

    Article • October 2016, SAE International

    Dr Wan Mohd Faizal Wan Mahmood

  13. Effect of fuel injection timings on performance and emissions of stratified combustion CNGDI engine

    Article • Applied Thermal Engineering, October 2016, Elsevier

    Dr Wan Mohd Faizal Wan Mahmood

  14. A computational study on effect of pitch difference in pure plunging tandem wings

    Article • IOP Conference Series Materials Science and Engineering, October 2016, Institute of Physics Publishing

    Dr Wan Mohd Faizal Wan Mahmood

  15. SOOT PARTICLE MEASUREMENT IN ENGINE CYLINDER: A REVIEW

    Article • Jurnal Teknologi (Sciences & Engineering), July 2016, Penerbit UTM Press

    Dr Wan Mohd Faizal Wan Mahmood

  16. Medium-scale gasification of oil palm empty fruit bunch for power generation

    Article • Journal of Material Cycles and Waste Management, June 2016, Springer Science + Business Media

    Dr Wan Mohd Faizal Wan Mahmood

  17. Synthesis gas from oil palm kernel shell by gasification process

    Article • International Journal of Green Energy, March 2016, Taylor & Francis

    Dr Wan Mohd Faizal Wan Mahmood

  18. Investigation of Physical and Mechanical Properties of 3-D Turbulent Flow in Orifice Pipe

    Article • Applied Mechanics and Materials, January 2016, Trans Tech Publications

    Dr Wan Mohd Faizal Wan Mahmood

  19. The Effect of Injection Timings on Performance and Emissions of Compressed Natural-Gas Direct Injection Engine

    Article • Journal of Combustion, January 2016, Hindawi Publishing Corporation

    Dr Wan Mohd Faizal Wan Mahmood

  20. Numerical Investigation of 3-D Turbulent Flow in Orifice Plate within a Pipe

    Article • Applied Mechanics and Materials, May 2015, Trans Tech Publications

    Dr Wan Mohd Faizal Wan Mahmood

  21. Ternary phase behavior of water microemulsified diesel-palm biodiesel

    Article • Frontiers in Energy, April 2015, Springer Science + Business Media

    Dr Wan Mohd Faizal Wan Mahmood

  22. Modeling of In-Cylinder Soot Particle Size Evolution and Distribution in a Direct Injection Diesel Engine

    Article • April 2015, SAE International

    Dr Wan Mohd Faizal Wan Mahmood

  23. medium scale gasification of oil palm frond

    Article • IET Renewable Power Generation, April 2015, the Institution of Engineering and Technology (the IET)

    Dr Wan Mohd Faizal Wan Mahmood

  24. Enhancement of heat transfer coefficient multi-metallic nanofluid with ANFIS modeling for thermophysical properties

    Article • Thermal Science, January 2015, National Library of Serbia

    Dr Wan Mohd Faizal Wan Mahmood

  25. Reliability Study of Solder Paste Alloy for the Improvement of Solder Joint at Surface Mount Fine-Pitch Components

    Article • Materials, December 2014, MDPI AG

    Dr Wan Mohd Faizal Wan Mahmood

  26. Skin Friction Coefficient and Boundary Layer Trend on UKM Aster i-Bond

    Article • Applied Mechanics and Materials, October 2014, Trans Tech Publications

    PROF CHE HUSNA AZHARI, Dr Wan Mohd Faizal Wan Mahmood

  27. Effect of Injector Nozzle Design on Spray Characteristics for Hydrogen Direct Injection Engine Conditions

    Article • Applied Mechanics and Materials, October 2014, Trans Tech Publications

    Dr Wan Mohd Faizal Wan Mahmood

  28. Public Perception and Acceptance of Diesel-Powered Passenger Cars in Malaysia: An Initial Study

    Article • Applied Mechanics and Materials, October 2014, Trans Tech Publications

    Dr Wan Mohd Faizal Wan Mahmood

  29. Measuring and ANFIS Modelling for Thermal Conductivity of Cu/Zn Bimetallic Nanofluids

    Article • Applied Mechanics and Materials, October 2014, Trans Tech Publications

    Dr Wan Mohd Faizal Wan Mahmood

  30. Effect of Vaned Diffuser on a Modified Turbocharger Centrifugal Compressor Performance

    Article • Applied Mechanics and Materials, October 2014, Trans Tech Publications

    Dr Wan Mohd Faizal Wan Mahmood

  31. Interpolation Techniques in Computational Particle Tracking inside a Direct-Injection Diesel Engine Cylinder

    Article • Applied Mechanics and Materials, October 2014, Trans Tech Publications

    Dr Wan Mohd Faizal Wan Mahmood

  32. Improvement of Engine Performance Using an Adaptive Valve Lift and Timing (AVLT) Mechanism at High Engine Speeds

    Article • Applied Mechanics and Materials, October 2014, Trans Tech Publications

    Dr Wan Mohd Faizal Wan Mahmood

  33. Comparison of Performance and Emission of a Gasoline Engine Fuelled by Gasoline and CNG Under Various Throttle Positions

    Article • Journal of Applied Sciences, April 2014, Science Alert

    Dr Wan Mohd Faizal Wan Mahmood

  34. Design and Analysis of Single Screw Extruder for Jatropha Seeds Using Finite Element Method

    Article • Research Journal of Applied Sciences Engineering and Technology, March 2014, Maxwell Scientific Publication Corp.

    Dr Wan Mohd Faizal Wan Mahmood

  35. Review on Electric Vehicle, Battery Charger, Charging Station and Standards

    Article • Research Journal of Applied Sciences Engineering and Technology, January 2014, Maxwell Scientific Publication Corp.

    Dr Wan Mohd Faizal Wan Mahmood

  36. Skin friction impacts on fuel consumption

    Article • International Journal of Vehicle Systems Modelling and Testing, January 2014, Inderscience Publishers

    Dr Wan Mohd Faizal Wan Mahmood

  37. Soot particle trajectories of a Di diesel engine at 18° ATDC crankshaft angle

    Article • IOP Conference Series Materials Science and Engineering, December 2013, Institute of Physics Publishing

    Dr Wan Mohd Faizal Wan Mahmood

  38. A Study of Engine Monitoring System Using Statistical Method

    Article • Applied Mechanics and Materials, December 2013, Trans Tech Publications

    Dr Wan Mohd Faizal Wan Mahmood

  39. Analysis of Soot Particle Movement in Diesel Engine under the Influence of Drag Force

    Article • Applied Mechanics and Materials, September 2013, Trans Tech Publications

    Dr Wan Mohd Faizal Wan Mahmood

  40. Numerical study on the Effect of Interaction Vaned Diffuser with Impeller on the Performance of a Modified Centrifugal Compressor

    Article • Journal of Mechanics, August 2013, Oxford University Press (OUP)

    Dr Wan Mohd Faizal Wan Mahmood, Layth Hasan

  41. Evaluation of Noise and Air Flow on a Motorized Adaptive Valve Lift and Timing Engine

    Article • Applied Mechanics and Materials, April 2013, Trans Tech Publications

    Dr Wan Mohd Faizal Wan Mahmood

  42. Comparison of Soot Particle Movement based on Crank Angle

    Article • Procedia Engineering, January 2013, Elsevier

    Dr Mohd Fadzli Bin Abdollah, Dr Wan Mohd Faizal Wan Mahmood

  43. Numerical Study of the Enhancement of Heat Transfer for Hybrid CuO-Cu Nanofluids Flowing in a Circular Pipe

    Article • Journal of Oleo Science, January 2013, Japan Oil Chemists' Society

    Dr Wan Mohd Faizal Wan Mahmood

  44. Effect of Oxides Nanoparticle Materials on the Pressure Loss and Heat Transfer of Nanofluids in Circular Pipes

    Article • Journal of Applied Sciences, December 2012, Science Alert

    Dr Wan Mohd Faizal Wan Mahmood

  45. Modelling and measuring the thermal conductivity of multi-metallic Zn/Cu nanofluid

    Article • Research on Chemical Intermediates, September 2012, Springer Science + Business Media

    Dr Wan Mohd Faizal Wan Mahmood

  46. Effect of Reynolds number on heat transfer and flow for multi-oxide nanofluids using numerical simulation

    Article • Research on Chemical Intermediates, August 2012, Springer Science + Business Media

    Dr Wan Mohd Faizal Wan Mahmood

  47. Numerical Simulation of Flow Inside a Modified Turbocharger Centrifugal Compressor

    Article • Asian Journal of Applied Sciences, August 2012, Science Alert

    Dr Wan Mohd Faizal Wan Mahmood

  48. Predicted Paths of Soot Particles in the Cylinders of a Direct Injection Diesel Engine

    Article • April 2012, SAE International

    Dr Wan Mohd Faizal Wan Mahmood

  49. Car Body and Chassis Development of UKM CARevo for Perodua Eco-Challenge 2011

    Article • Applied Mechanics and Materials, April 2012, Trans Tech Publications

    Dr Wan Mohd Faizal Wan Mahmood

  50. Comparing the Effects of Hydrogen Addition on Performance and Exhaust Emission in a Spark Ignition Fueled with Gasoline and CNG

    Article • Applied Mechanics and Materials, April 2012, Trans Tech Publications

    Dr Wan Mohd Faizal Wan Mahmood

  51. A Study on Alternative Fuel Blending for Homogeneous Charge Compression Ignition (HCCI) Engine Using Palm Oil Methyl Ester and RON 97

    Article • Applied Mechanics and Materials, April 2012, Trans Tech Publications

    Dr Wan Mohd Faizal Wan Mahmood

  52. Development of CNG direct injection (CNGDI) clean fuel system for extra power in small engine

    Article • January 2012, American Institute of Physics

    Dr Wan Mohd Faizal Wan Mahmood