All Stories

  1. Influence of clinical use on physical-structural surface properties and electrochemical potential of NiTi endodontic instruments

    Article • International Endodontic Journal, April 2017, Wiley

    Dr Vicente T L Buono, Erika Pereira

  2. Mechanical Properties of Nanoceramic Zirconia Coatings on NiTi Orthodontic Wires

    Article • Advances in Science and Technology, October 2016, Trans Tech Publications

    Dr Vicente T L Buono

  3. Impact of Heat Treatments on the Fatigue Resistance of Different Rotary Nickel-titanium Instruments

    Article • Journal of Endodontics, September 2014, Elsevier

    Dr Vicente T L Buono

  4. The influence of internal oxidation during decarburization of a grain oriented silicon steel on the morphology of the glass film formed at high temperature annealing

    Article • Journal of Magnetism and Magnetic Materials, May 2014, Elsevier

    Dr Vicente T L Buono

  5. Mechanical behavior of three nickel-titanium rotary files: A comparison of numerical simulation with bending and torsion tests

    Article • Materials Science and Engineering C, April 2014, Elsevier

    Dr Vicente T L Buono

  6. Mechanical behavior of M-Wire and conventional NiTi wire used to manufacture rotary endodontic instruments

    Article • Dental Materials, December 2013, Elsevier

    Dr Vicente T L Buono

  7. Comparison of the Mechanical Behavior between Controlled Memory and Superelastic Nickel-Titanium Files via Finite Element Analysis

    Article • Journal of Endodontics, November 2013, Elsevier

    Dr Vicente T L Buono

  8. Microstructural and topographic characterization of concrete protected by acrylic paint

    Article • Materials Research, August 2013, FapUNIFESP (SciELO)

    Dr Vicente T L Buono

  9. Flexibility and torsional behaviour of rotary nickel-titanium PathFile, RaCe ISO 10, Scout RaCe and stainless steel K-File hand instruments

    Article • International Endodontic Journal, July 2013, Wiley

    Dr Vicente T L Buono

  10. The influence of simulated clinical use on the flexibility of rotary ProTaper Universal, K3 and EndoSequence nickel–titanium instruments

    Article • International Endodontic Journal, February 2013, Wiley

    Dr Vicente T L Buono

  11. The effect of chemical composition on selective oxidation of bake hardenable steel

    Article • Anti-Corrosion Methods and Materials, November 2012, Emerald

    Dr Vicente T L Buono, Mrs Juliana Porto Guimaraes

  12. An analytical mechanical model to describe the response of NiTi rotary endodontic files in a curved root canal

    Article • Materials Science and Engineering C, August 2012, Elsevier

    Dr Vicente T L Buono

  13. Cleaning the apical third of curved canals after different irrigation protocols

    Article • Brazilian Dental Journal, January 2012, FapUNIFESP (SciELO)

    Dr Vicente T L Buono

  14. Effect of Lateral Pressure Motion on the Torsional Behavior of Rotary ProTaper Universal Instruments

    Article • Journal of Endodontics, August 2011, Elsevier

    Dr Vicente T L Buono

  15. Selective oxidation of dual phase steel after annealing at different dew points

    Article • Applied Surface Science, April 2011, Elsevier

    Dr Vicente T L Buono

  16. Relationship between flexibility and physical, chemical, and geometric characteristics of rotary nickel-titanium instruments

    Article • Oral Surgery Oral Medicine Oral Pathology Oral Radiology and Endodontology, October 2010, Elsevier

    Dr Vicente T L Buono

  17. Flexural Fatigue and Torsional Resistance of ProFile GT and ProFile GT Series X Instruments

    Article • Journal of Endodontics, April 2010, Elsevier

    Dr Vicente T L Buono

  18. Comparison between the Flexibility of Three Different Types of Rotary NiTi Endodontic Instruments

    Article • Materials Science Forum, March 2010, Trans Tech Publications

    Dr Vicente T L Buono

  19. Fatigue Life Curves of NiTi Alloys – The Z Effect

    Article • Materials Science Forum, March 2010, Trans Tech Publications

    Dr Vicente T L Buono, Berenice Mendonca

  20. The Influence of Cyclic Straining in Torsion on Fatigue Resistance and Torsional Properties of ProTaper NiTi Endodontic Instruments

    Article • Materials Science Forum, March 2010, Trans Tech Publications

    Dr Vicente T L Buono

  21. Geometric and dimensional characteristics of simulated curved canals prepared with proTaper instruments

    Article • Journal of Applied Oral Science, February 2010, FapUNIFESP (SciELO)

    Dr Vicente T L Buono

  22. The chemical and mechanical characteristics of thermally aged interference thin films on stainless steel

    Article • Surface and Coatings Technology, March 2009, Elsevier

    Dr Vicente T L Buono

  23. Flexibility and Torsional Strength of ProTaper and ProTaper Universal Rotary Instruments Assessed by Mechanical Tests

    Article • Journal of Endodontics, January 2009, Elsevier

    Dr Vicente T L Buono

  24. Characterization of interference thin films grown on stainless steel surface by alternate pulse current in a sulphochromic solution

    Article • Materials Research, December 2008, FapUNIFESP (SciELO)

    Dr Vicente T L Buono

  25. Characterization of a new solid lipid nanoparticle formulation containing retinoic acid for topical treatment of acne

    Article • Powder Diffraction, March 2008, Cambridge University Press

    Dr Vicente T L Buono

  26. Adhesiveness of cold rolled steels for car body parts

    Article • Materials Research, September 2007, FapUNIFESP (SciELO)

    Dr Vicente T L Buono

  27. RESISTÊNCIA À CORROSÃO DE AÇOS ELETROGALVANIZADOS FOSFATIZADOS E PINTADOS

    Article • Tecnologia em Metalurgia e Materiais, January 2007, Editora Cubo Multimidia

    Dr Vicente T L Buono

  28. Mechanical properties of interference thin films on colored stainless steel evaluated by depth-sensing nanoindentation

    Article • Surface and Coatings Technology, December 2006, Elsevier

    Dr Vicente T L Buono

  29. The effect of sodium hypochlorite on the surface characteristics and fatigue resistance of ProFile nickel-titanium instruments

    Article • Oral Surgery Oral Medicine Oral Pathology Oral Radiology and Endodontology, October 2006, Elsevier

    Dr Vicente T L Buono

  30. Influence of simulated clinical use on the torsional behavior of nickel-titanium rotary endodontic instruments

    Article • Oral Surgery Oral Medicine Oral Pathology Oral Radiology and Endodontology, May 2006, Elsevier

    Dr Vicente T L Buono

  31. VARIAÇÃO DAS PERDAS MAGNÉTICAS DURANTE ENVELHECIMENTO DE UM AÇO ELÉTRICO

    Article • Tecnologia em Metalurgia e Materiais, January 2006, Editora Cubo Multimidia

    Dr Vicente T L Buono

  32. CURVAS DE VIDA EM FADIGA DE BAIXO CICLO DE LIGAS SUPERELÁSTICAS DE NiTi

    Article • Tecnologia em Metalurgia e Materiais, January 2006, Editora Cubo Multimidia

    Dr Vicente T L Buono

  33. Decrease in the fatigue resistance of nickel-titanium rotary instruments after clinical use in curved root canals

    Article • Oral Surgery Oral Medicine Oral Pathology Oral Radiology and Endodontology, August 2005, Elsevier

    Dr Vicente T L Buono

  34. Decarburization Kinetics during Annealing of a Semi-processed Electrical Steel

    Article • ISIJ International, January 2004, Iron and Steel Institute of Japan

    Dr Vicente T L Buono

  35. Optimization of the strain aging resistance in aluminum killed steels produced by continuous annealing

    Article • Materials Science and Engineering A, August 2003, Elsevier

    Dr Vicente T L Buono

  36. Measurement of Dynamic Strain Aging in Pearlitic Steels by Tensile Test.

    Article • ISIJ International, January 2003, Iron and Steel Institute of Japan

    Dr Vicente T L Buono, Berenice Mendonca

  37. Hydrothermal synthesis and sintering of electroceramics

    Article • Journal of the European Ceramic Society, June 1999, Elsevier

    Dr Vicente T L Buono

  38. Hydrothermal synthesis and sintering of nickel and manganese-zinc ferrites

    Article • Journal of Materials Research, December 1997, Springer Science + Business Media

    Dr Vicente T L Buono

  39. Influence of hydrothermal powder morphology on the sintered microstructure of MnZn ferrites

    Article • Journal of Materials Chemistry, January 1997, Royal Society of Chemistry

    Dr Vicente T L Buono