All Stories

  1. Diaboloidal mirrors: algebraic solution and surface shape approximations
  2. Super-resolution surface slope metrology of x-ray mirrors
  3. Environmental influences on autocollimator-based angle and form metrology
  4. Ex situ metrology and data analysis for optimization of beamline performance of aspherical pre-shaped x-ray mirrors at the advanced light source
  5. Optimization of the size and shape of the scanning aperture in autocollimator-based deflectometric profilometers
  6. Modeling surface topography of state-of-the-art x-ray mirrors as a result of stochastic polishing process: recent developments
  7. New operational mode of the pencil beam interferometry based LTP
  8. Modeling of surface metrology of state-of-the-art x-ray mirrors as a result of stochastic polishing process
  9. Optimized mirror shape tuning using beam weightings based on distance, angle of incidence, reflectivity, and power
  10. Preface: The 5th International Workshop on X-ray Mirror Design, Fabrication, and Metrology
  11. DABAM: an open-source database of X-ray mirrors metrology
  12. Modeling of surface metrology of state-of-the-art x-ray mirrors as a result of stochastic polishing process
  13. Advanced environmental control as a key component in the development of ultrahigh accuracyex situmetrology for x-ray optics
  14. Binary pseudorandom test standard to determine the modulation transfer function of optical microscopes
  15. Performance optimization of a bendable parabolic cylinder collimating X-ray mirror for the ALS micro-XAS beamline 10.3.2
  16. High-order multilayer coated blazed gratings for high resolution soft x-ray spectroscopy
  17. Specification of x-ray mirrors in terms of system performance: new twist to an old plot
  18. Angular calibration of surface slope measuring profilers with a bendable mirror
  19. The developmental long trace profiler (DLTP) optimized for metrology of side-facing optics at the ALS
  20. A new x-ray optics laboratory (XROL) at the ALS: mission, arrangement, metrology capabilities, performance, and future plans
  21. Specification of x-ray mirrors in terms of system performance: a new twist to an old plot
  22. Application of the time-invariant linear filter approximation to parametrization of surface metrology with high-quality x-ray optics
  23. Application of time-invariant linear filter approximation to parametrization of one- and two-dimensional surface metrology with high quality x-ray optics
  24. Two-foci bendable mirrors for the ALS MAESTRO beamline: design and metrology characterization and optimal tuning of the mirror benders
  25. Correlation analysis of surface slope metrology measurements of high quality x-ray optics
  26. Status of multi-beam long trace-profiler development
  27. High precision surface metrology of x-ray optics with an interferometric microscope
  28. Metrology for the Advancement of X-ray Optics at the ALS
  29. Advanced X-ray Optics Metrology
  30. Ex situ metrology of x-ray diffraction gratings
  31. Methodology for optimal in situ alignment and setting of bendable optics for nearly diffraction-limited focusing of soft x-rays
  32. Cross comparison of surface slope and height optical metrology with a super-polished plane Si mirror
  33. Ex situ tuning of bendable x-ray mirrors for optimal beamline performance
  34. Methodology for optimal in situ alignment and setting of bendable optics for diffraction-limited focusing of soft x-rays
  35. Optimal setting of bendable optics based on FEA calculations
  36. Progress of multi-beam long trace-profiler development
  37. Development and calibration of mirrors and gratings for the soft x-ray materials science beamline at the Linac Coherent Light Source free-electron laser
  38. An experimental apparatus for diffraction-limited soft x-ray nano-focusing
  39. Design optimization of bendable x-ray mirrors
  40. Reliable before-fabrication forecasting of expected surface slope distributions for x-ray optics
  41. Automated suppression of errors in LTP-II slope measurements with x-ray optics
  42. Development of multi-beam long trace profiler
  43. Development of in situ, at-wavelength metrology for soft X-ray nano-focusing
  44. Development of a new generation of optical slope measuring profiler
  45. Characterization of electron microscopes with binary pseudo-random multilayer test samples
  46. Fabrication and characterization of ultra-high resolution multilayer-coated blazed gratings
  47. Automated suppression of errors in LTP-II slope measurements of x-ray optics. Part 2: Specification for automated rotating/flipping/aligning system
  48. Automated suppression of errors in LTP-II slope measurements with x-ray optics. Part1: Review of LTP errors and methods for the error reduction
  49. Cross-check of ex-situ and in-situ metrology of a bendable temperature stabilized KB mirror
  50. At-wavelength optical metrology development at the ALS
  51. Developmental long trace profiler using optimally aligned mirror based pentaprism
  52. Calibration of the modulation transfer function of surface profilometers with binary pseudo-random test standards: expanding the application range
  53. Studies in optimal configuration of the LTP
  54. High-efficiency multilayer blazed gratings for EUV and soft x-rays: recent developments
  55. High-efficiency 5000 lines/mm multilayer-coated blazed grating for extreme ultraviolet wavelengths
  56. Autocollimators for deflectometry: Current status and future progress
  57. Sub-microradian surface slope metrology with the ALS Developmental Long Trace Profiler
  58. Binary pseudo-random gratings and arrays for calibration of modulation transfer functions of surface profilometers
  59. Surface Slope Metrology on Deformable Soft X-ray Mirrors
  60. Elliptically Bent X-Ray Mirrors with Active Temperature Stabilization
  61. A Soft X-ray Spectrometer using a Highly Dispersive Multilayer Grating
  62. 2-D Spatial Frequency Considerations in Comparing 1D Power Spectral Density Measurements
  63. Optimal measurement strategies for effective suppression of drift errors
  64. Binary pseudo-random gratings and arrays for calibration of the modulation transfer function of surface profilometers: recent developments
  65. 5000 groove/mm multilayer-coated blazed grating with 33% efficiency in the 3rd order in the EUV wavelength range
  66. A dedicated superbend x-ray microdiffraction beamline for materials, geo-, and environmental sciences at the advanced light source
  67. At-Wavelength and Optical Metrology of Bendable X-Ray Optics for Nanofocusing at the ALS
  68. Development of pseudorandom binary arrays for calibration of surface profile metrology tools
  69. Fabrication and characterization of a new high density Sc/Si multilayer sliced grating
  70. Performance of the upgraded LTP-II at the ALS Optical Metrology Laboratory
  71. Submillimeter-resolution magnetic resonance imaging at the Earth’s magnetic field with an atomic magnetometer
  72. Binary pseudorandom grating standard for calibration of surface profilometers
  73. Integration of the Two-Dimensional Power Spectral Density into Specifications for the X-Ray Domain--Problems and Opportunities
  74. Calibration of Modulation Transfer Function of Surface Profilometers with 1-D and 2-D Binary Pseudo-Random Array Standards
  75. Development of an ultrahigh-resolution diffraction grating for soft x-rays
  76. Proposal for a universal test mirror for characterization of slope measuring instruments
  77. Binary pseudo-random grating as a standard test surface for measurement of modulation transfer function of interferometric microscopes
  78. Flat-field calibration of CCD detector for long trace profiler
  79. Precision tiltmeter as a reference for slope measuring instruments
  80. New procedures for the adjustment of elliptically bent mirrors with the long trace profiler
  81. Global High-Accuracy Intercomparison of Slope Measuring Instruments
  82. Positioning errors of pencil-beam interferometers for long trace profilers
  83. Air convection noise of pencil-beam interferometer for long trace profiler
  84. Construction and applications of an atomic magnetic gradiometer based on nonlinear magneto-optical rotation
  85. Surface roughness of stainless-steel mirrors for focusing soft x rays
  86. Cross-check of different techniques for two-dimensional power spectral density measurements of x-ray optics
  87. Elimination of 'ghost'-effect-related systematic errors in metrology of x-ray optics with a long trace profiler
  88. Two-dimensional power spectral density measurements of x-ray optics with the Micromap interferometric microscope
  89. Dynamic effects in nonlinear magneto-optics of atoms and molecules: review
  90. Production of dry powder clots using a piezoelectric drop generator
  91. Obtaining frequency markers of variable separation with a spherical mirror Fabry-Perot interferometer
  92. Laser frequency stabilization using linear magneto-optics
  93. Applications of nonlinear magneto-optic effects with ultra-narrow widths
  94. Nonlinear Magneto-optic Effects with Ultranarrow Widths