Professor Vadim V Silberschmidt

All Stories

1. 
   Attitude interpolation of B-spline curve based on modified Rodrigues parameters

   Article • July 2024, ACM (Association for Computing Machinery)

   Professor Vadim V Silberschmidt

2. 
   Effect of Heat Treatment on Elastic Properties and Fracture Toughness of Fused Filament Fabricated PEEK for Biomedical Applications

   Article • Polymers, December 2022, MDPI AG

   Professor Vadim V Silberschmidt

3. 
   In silico evaluation of additively manufactured 316L stainless steel stent in a patient-specific coronary artery

   Article • Medical Engineering & Physics, November 2022, Elsevier

   Professor Vadim V Silberschmidt

4. 
   Inelastic Deformation of Coronary Stents: Two-Level Model

   Article • Materials, October 2022, MDPI AG

   Professor Vadim V Silberschmidt

5. 
   Biocompatibility of 3D-Printed PLA, PEEK and PETG: Adhesion of Bone Marrow and Peritoneal Lavage Cells

   Article • Polymers, September 2022, MDPI AG

   Professor Vadim V Silberschmidt

6. 
   Mesoscale damage behavior and meso-macroscale correlation of low-cycle fatigue in Z2CND18.12N austenitic stainless steel

   Article • Materials Science and Engineering A, September 2022, Elsevier

   Professor Vadim V Silberschmidt

7. 
   Dynamic Crack Propagation along Elastic Interfaces in Double Cantilever Beams under High Loading Rates

   Article • Journal of Aerospace Engineering, July 2022, American Society of Civil Engineers (ASCE)

   Professor Vadim V Silberschmidt

8. 
   Exploring the Mechanical Properties and Performance of Type-I Collagen at Various Length Scales: A Progress Report

   Article • Materials, April 2022, MDPI AG

   Professor Vadim V Silberschmidt

9. 
   Fracture behaviour and toughening mechanisms of dry and wet collagen

   Article • Acta Biomaterialia, April 2022, Elsevier

   Professor Vadim V Silberschmidt

10. 
    Preface

    Article • January 2022, Elsevier

    Professor Vadim V Silberschmidt

11. 
    Personalised nitinol stent for focal plaques: Design and evaluation

    Article • Journal of Biomechanics, January 2022, Elsevier

    Professor Vadim V Silberschmidt

12. 
    Deformation and fracture behaviors of long-fiber hydrogels

    Article • January 2022, Elsevier

    Professor Vadim V Silberschmidt

13. 
    Numerical modeling of hydrogels: from microscopic network to macroscopic material

    Article • January 2022, Elsevier

    Professor Vadim V Silberschmidt

14. 
    A numerical study on influence of strain gradients on lattice rotation in micro-machining of a single crystal

    Article • Challenge Journal of Structural Mechanics, September 2021, Tulpar Academic Publishing

    Professor Vadim V Silberschmidt

15. 
    Remodelling of trabecular bone in human distal tibia: A model based on an in-vivo HR-pQCT study

    Article • Journal of the Mechanical Behavior of Biomedical Materials, July 2021, Elsevier

    Professor Vadim V Silberschmidt

16. 
    Analytical corrections for double-cantilever beam tests

    Article • International Journal of Fracture, June 2021, Springer Science + Business Media

    Professor Vadim V Silberschmidt

17. 
    Damage in extrusion additive manufactured biomedical polymer: Effects of testing direction and environment during cyclic loading

    Article • Journal of the Mechanical Behavior of Biomedical Materials, June 2021, Elsevier

    Professor Vadim V Silberschmidt

18. 
    A computational study of fatigue resistance of nitinol stents subjected to walk‐induced femoropopliteal artery motion

    Article • Journal of Biomechanics, March 2021, Elsevier

    Professor Vadim V Silberschmidt

19. 
    Printability and mechanical performance of biomedical PDMS-PEEK composites developed for material extrusion

    Article • Journal of the Mechanical Behavior of Biomedical Materials, March 2021, Elsevier

    Professor Vadim V Silberschmidt

20. 
    Analytical prediction of shear angle and frictional behaviour in vibration-assisted cutting

    Article • Journal of Manufacturing Processes, February 2021, Elsevier

    Professor Vadim V Silberschmidt

21. 
    ZigZagZ: Improving mechanical performance in extrusion additive manufacturing by nonplanar toolpaths

    Article • Additive Manufacturing, February 2021, Elsevier

    Professor Vadim V Silberschmidt

22. 
    Mechanical performance of 3D printed polylactide during degradation

    Article • Additive Manufacturing, February 2021, Elsevier

    Professor Vadim V Silberschmidt

23. 
    Damage and fracture of biological and biomedical materials

    Article • Engineering Fracture Mechanics, January 2021, Elsevier

    Professor Vadim V Silberschmidt

24. 
    CONVEX (CONtinuously Varied EXtrusion): A new scale of design for additive manufacturing

    Article • Additive Manufacturing, January 2021, Elsevier

    Professor Vadim V Silberschmidt

25. 
    Anisotropic mechanical behaviour of calendered nonwoven fabrics: Strain-rate dependency

    Article • Journal of Composite Materials, December 2020, SAGE Publications

    Professor Vadim V Silberschmidt

26. 
    Dry vs. wet: Properties and performance of collagen films. Part II. Cyclic and time-dependent behaviours

    Article • Journal of the Mechanical Behavior of Biomedical Materials, December 2020, Elsevier

    Professor Vadim V Silberschmidt

27. 
    Size effect in flexural behaviour of unidirectional GFRP composites

    Article • Journal of Mechanical Science and Technology, December 2020, Springer Science + Business Media

    Professor Vadim V Silberschmidt

28. 
    Delamination propagation under high loading rate

    Article • Composite Structures, December 2020, Elsevier

    Professor Vadim V Silberschmidt

29. 
    Fractal approaches in mechanics of jointed rocks

    Article • November 2020, Taylor & Francis

    Professor Vadim V Silberschmidt

30. 
    High-impact exercise stimulated localised adaptation of microarchitecture across distal tibia in postmenopausal women

    Article • Osteoporosis International, November 2020, Springer Science + Business Media

    Professor Vadim V Silberschmidt

31. 
    Dry vs. wet: Properties and performance of collagen films. Part I. Mechanical behaviour and strain-rate effect

    Article • Journal of the Mechanical Behavior of Biomedical Materials, November 2020, Elsevier

    Professor Vadim V Silberschmidt

32. 
    Theory of dynamic mode-II delamination in end-loaded split tests

    Article • Composites Part C Open Access, November 2020, Elsevier

    Professor Vadim V Silberschmidt

33. 
    Modelling indentation of human lower-limb soft tissue: simulation parameters and their effects

    Article • Continuum Mechanics and Thermodynamics, October 2020, Springer Science + Business Media

    Professor Vadim V Silberschmidt

34. 
    Editorial: 22nd European Conference on Fracture (ECF 22)

    Article • International Journal of Fatigue, October 2020, Elsevier

    Professor Vadim V Silberschmidt

35. 
    Scale invariance in stochastic fracture of rocks

    Article • September 2020, Taylor & Francis

    Professor Vadim V Silberschmidt

36. 
    Improvements of material removal in cortical bone via impact cutting method

    Article • Journal of the Mechanical Behavior of Biomedical Materials, August 2020, Elsevier

    Professor Vadim V Silberschmidt

37. 
    Structural integrity analysis and damage assessment of a long composite wind turbine blade under extreme loading

    Article • Composite Structures, August 2020, Elsevier

    Professor Vadim V Silberschmidt

38. 
    Simulations of Machining Processes at Small Spatio-temporal Scales

    Article • July 2020, Springer Science + Business Media

    Professor Vadim V Silberschmidt

39. 
    Printed hydrogel nanocomposites: fine-tuning nanostructure for anisotropic mechanical and conductive properties

    Article • Advanced Composites and Hybrid Materials, July 2020, Springer Science + Business Media

    Professor Vadim V Silberschmidt

40. 
    Numerical study of crack initiation and growth in human cortical bone: Effect of micro-morphology

    Article • Engineering Fracture Mechanics, June 2020, Elsevier

    Professor Vadim V Silberschmidt

41. 
    Mechanism of material removal in orthogonal cutting of cortical bone

    Article • Journal of the Mechanical Behavior of Biomedical Materials, April 2020, Elsevier

    Professor Vadim V Silberschmidt

42. 
    Shear band widening mechanism in Ti–6Al–4V under high strain rate deformation

    Article • Journal of Materials Research, March 2020, Cambridge University Press

    Professor Vadim V Silberschmidt

43. 
    Mechanical modification of bacterial cellulose hydrogel under biaxial cyclic tension

    Article • Mechanics of Materials, March 2020, Elsevier

    Professor Vadim V Silberschmidt

44. 
    Special Issue on Vibro-impact and friction dynamics

    Article • Journal of Sound and Vibration, March 2020, Elsevier

    Professor Vadim V Silberschmidt

45. 
    Effect of microstructure on porosity of random fibrous networks

    Article • Journal of the Textile Institute, February 2020, Taylor & Francis

    Professor Vadim V Silberschmidt

46. 
    Production of high-quality extremely-thin histological sections by ultrasonically assisted cutting

    Article • Journal of Materials Processing Technology, February 2020, Elsevier

    Professor Vadim V Silberschmidt

47. 
    Dynamic delamination on elastic interface

    Article • Composite Structures, February 2020, Elsevier

    Professor Vadim V Silberschmidt

48. 
    Fracture of 3D-printed polymers: Crucial role of filament-scale geometric features

    Article • Engineering Fracture Mechanics, February 2020, Elsevier

    Professor Vadim V Silberschmidt

49. 
    Effect of environment on mechanical properties of 3D printed polylactide for biomedical applications

    Article • Journal of the Mechanical Behavior of Biomedical Materials, February 2020, Elsevier

    Professor Vadim V Silberschmidt

50. 
    Intelligent Manipulator with Flexible Link and Joint: Modeling and Vibration Control

    Article • Shock and Vibration, January 2020, Hindawi Publishing Corporation

    Professor Vadim V Silberschmidt

51. 
    Experimental investigation on the effect of drill quality on the performance of bone drilling

    Article • Biomedical Engineering / Biomedizinische Technik, January 2020, De Gruyter

    Dr Khurshid Alam, Professor Vadim V Silberschmidt

52. 
    Mechanistic evaluation of long-term in-stent restenosis based on models of tissue damage and growth

    Article • Biomechanics and Modeling in Mechanobiology, January 2020, Springer Science + Business Media

    Professor Vadim V Silberschmidt

53. 
    A brief review on the mechanical behavior of nonwoven fabrics

    Article • Journal of Engineered Fibers and Fabrics, January 2020, SAGE Publications

    Professor Vadim V Silberschmidt

54. 
    High-Speed Mode-I Delamination

    Article • January 2020, Springer Science + Business Media

    Professor Vadim V Silberschmidt

55. 
    Machining in monocrystals

    Article • January 2020, Elsevier

    Professor Vadim V Silberschmidt

56. 
    Mechanics of ultrasonically assisted drilling

    Article • January 2020, Elsevier

    Professor Vadim V Silberschmidt

57. 
    Microstructural changes in machining

    Article • January 2020, Elsevier

    Professor Vadim V Silberschmidt

58. 
    Dynamics and Thermodynamics of Fracture Mechanics

    Article • January 2020, Springer Science + Business Media

    Professor Vadim V Silberschmidt

59. 
    Ballistic performance of polyurea-coated thin aluminium plates: numerical study

    Article • Procedia Structural Integrity, January 2020, Elsevier

    Professor Vadim V Silberschmidt

60. 
    Damage in extrusion additive manufactured parts: effect of environment and cyclic loading

    Article • Procedia Structural Integrity, January 2020, Elsevier

    Professor Vadim V Silberschmidt

61. 
    Fracture Behaviour of Collagen: Effect of Environment

    Article • Procedia Structural Integrity, January 2020, Elsevier

    Professor Vadim V Silberschmidt

62. 
    Fracture of 3D-printed micro-tensile specimens: filament-scale geometry-induced anisotropy

    Article • Procedia Structural Integrity, January 2020, Elsevier

    Professor Vadim V Silberschmidt

63. 
    Polyurea-coated glass-fibre-reinforced laminate under high-speed impact: experimental study

    Article • Procedia Structural Integrity, January 2020, Elsevier

    Professor Vadim V Silberschmidt

64. 
    Trabecular bone remodelling: finite-element simulation

    Article • Procedia Structural Integrity, January 2020, Elsevier

    Professor Vadim V Silberschmidt

65. 
    A crystal-plasticity model of extruded AM30 magnesium alloy

    Article • Computational Materials Science, December 2019, Elsevier

    Professor Vadim V Silberschmidt

66. 
    Experimental and Numerical Methods to Analyse Deformation and Damage in Random Fibrous Networks

    Article • November 2019, Springer Science + Business Media

    Professor Vadim V Silberschmidt

67. 
    Modelling strain localization in Ti–6Al–4V at high loading rate: a phenomenological approach

    Article • Philosophical Transactions of the Royal Society A Mathematical Physical and Engineering Sciences, November 2019, Royal Society Publishing

    Professor Vadim V Silberschmidt

68. 
    Finite element simulations of conventional and ultrasonically assisted turning processes with plane and textured cutting inserts

    Article • Journal of Micromanufacturing, November 2019, SAGE Publications

    Professor Vadim V Silberschmidt

69. 
    Ultrasonically assisted drilling in marble

    Article • Journal of Sound and Vibration, November 2019, Elsevier

    Professor Vadim V Silberschmidt

70. 
    Tensile properties of 3D multi-layer wrapping braided composite: Progressive damage analysis

    Article • Composites Part B Engineering, November 2019, Elsevier

    Professor Vadim V Silberschmidt

71. 
    Failure behaviour of short-fibre-reinforced PBT composites: Effect of strain rate

    Article • Engineering Failure Analysis, November 2019, Elsevier

    Professor Vadim V Silberschmidt

72. 
    A review: microstructure and properties of tin-silver-copper lead-free solder series for the applications of electronics

    Article • Soldering & Surface Mount Technology, October 2019, Emerald

    Professor Vadim V Silberschmidt

73. 
    Mesoscale damage analysis of needle-punched carbon/carbon composite considering randomness of inherent defects

    Article • Composites Science and Technology, October 2019, Elsevier

    Professor Vadim V Silberschmidt

74. 
    Damage and damping of short-glass-fibre-reinforced PBT composites under dynamic conditions: Effect of matrix behaviour

    Article • Composite Structures, October 2019, Elsevier

    Professor Vadim V Silberschmidt

75. 
    Initiation and growth of short cracks in a nickel-based single crystal superalloy

    Article • August 2019, Taylor & Francis

    Professor Vadim V Silberschmidt

76. 
    Modelling crack-tip behaviour in a directionally solidified nickel alloy under fatigue-oxidation conditions

    Article • August 2019, Taylor & Francis

    Professor Vadim V Silberschmidt

77. 
    Modelling the temperature and strain-rate effects of extruded magnesium alloy accounting for deformation slip and twinning

    Article • August 2019, Taylor & Francis

    Professor Vadim V Silberschmidt

78. 
    Finite element evaluation of artery damage in deployment of polymeric stent with pre- and post-dilation

    Article • Biomechanics and Modeling in Mechanobiology, July 2019, Springer Science + Business Media

    Professor Vadim V Silberschmidt

79. 
    Deformation response and microstructural evolution of as-cast Mg alloys AM30 and AM50 during hot compression

    Article • International Journal of Materials Research (formerly Zeitschrift fuer Metallkunde), June 2019, Carl Hanser Verlag

    Professor Vadim V Silberschmidt

80. 
    Enhanced machinability of SiC-reinforced metal-matrix composite with hybrid turning

    Article • Journal of Materials Processing Technology, June 2019, Elsevier

    Professor Vadim V Silberschmidt

81. 
    Polydimethylsiloxane and poly(ether) ether ketone functionally graded composites for biomedical applications

    Article • Journal of the Mechanical Behavior of Biomedical Materials, May 2019, Elsevier

    Professor Vadim V Silberschmidt

82. 
    Mechanical and chemical characterisation of bioresorbable polymeric stent over two-year in vitro degradation

    Article • Journal of Biomaterials Applications, April 2019, SAGE Publications

    Professor Vadim V Silberschmidt

83. 
    Machinability of natural-fibre-reinforced polymer composites: Conventional vs ultrasonically-assisted machining

    Article • Composites Part A Applied Science and Manufacturing, April 2019, Elsevier

    Professor Vadim V Silberschmidt

84. 
    Characterising variability and regional correlations of microstructure and mechanical competence of human tibial trabecular bone: An in-vivo HR-pQCT study

    Article • Bone, April 2019, Elsevier

    Professor Vadim V Silberschmidt

85. 
    Quantifying the mechanical properties of polymeric tubing and scaffold using atomic force microscopy and nanoindentation

    Article • Polymer Engineering & Science, March 2019, Wiley

    Professor Vadim V Silberschmidt

86. 
    Coupling crystal plasticity and continuum damage mechanics for creep assessment in Cr-based power-plant steel

    Article • Mechanics of Materials, March 2019, Elsevier

    Professor Vadim V Silberschmidt

87. 
    SPH-BEM simulation of underwater explosion and bubble dynamics near rigid wall

    Article • Science China Technological Sciences, February 2019, Springer Science + Business Media

    Professor Vadim V Silberschmidt

88. 
    Theoretical Analysis on Needle-Punched Carbon/Carbon Composites

    Article • Applied Composite Materials, January 2019, Springer Science + Business Media

    Professor Vadim V Silberschmidt

89. 
    Ice vs. steel: Ballistic impact of woven carbon/epoxy composites. Part II – Numerical modelling

    Article • Engineering Fracture Mechanics, January 2019, Elsevier

    Professor Vadim V Silberschmidt

90. 
    In-situ SEM study of slip-controlled short-crack growth in single-crystal nickel superalloy

    Article • Materials Science and Engineering A, January 2019, Elsevier

    Professor Vadim V Silberschmidt

91. 
    Low-cycle fatigue of single crystal nickel-based superalloy – mechanical testing and TEM characterisation

    Article • Materials Science and Engineering A, January 2019, Elsevier

    Professor Vadim V Silberschmidt

92. 
    When superhydrophobic coatings are icephobic: Role of surface topology

    Article • Surface and Coatings Technology, January 2019, Elsevier

    Professor Vadim V Silberschmidt

93. 
    Nonwovens—Structure-process-property relationships

    Article • January 2019, Elsevier

    Professor Vadim V Silberschmidt

94. 
    Experimental Study of Synthesized Co-polymer for Stent Application

    Article • Procedia Structural Integrity, January 2019, Elsevier

    Professor Vadim V Silberschmidt

95. 
    Characterisation of Mechanical Properties of Polymeric Stent using Nanoindentation

    Article • Procedia Structural Integrity, January 2019, Elsevier

    Professor Vadim V Silberschmidt

96. 
    Characterisation of Additively Manufactured Metallic Stents

    Article • Procedia Structural Integrity, January 2019, Elsevier

    Professor Vadim V Silberschmidt

97. 
    Finite Element Modelling of Stent Deployment in a Patient-specific Coronary Artery

    Article • Procedia Structural Integrity, January 2019, Elsevier

    Professor Vadim V Silberschmidt

98. 
    Mechanical Performance of Self-expandable Nitinol Stent with Lesion-specific Design

    Article • Procedia Structural Integrity, January 2019, Elsevier

    Professor Vadim V Silberschmidt

99. 
    Hybrid machining of metal-matrix composite

    Article • Procedia CIRP, January 2019, Elsevier

    Professor Vadim V Silberschmidt

100. 
     Editorial

     Article • Procedia Structural Integrity, January 2019, Elsevier

     Professor Vadim V Silberschmidt

101. 
     IDENTIFICATION OF ELASTIC PARAMETERS OF COMPOSITE USING EXPERIMENTAL DATA ON MODAL CHARACTERISTICS OF SAMPLES

     Article • PNRPU Mechanics Bulletin, January 2019, PNRPU Publishing Office

     Professor Vadim V Silberschmidt

102. 
     Deformation and damage of random fibrous networks

     Article • International Journal of Solids and Structures, December 2018, Elsevier

     Professor Vadim V Silberschmidt

103. 
     Ice vs. steel: Ballistic impact of woven carbon/epoxy composites. Part I – Deformation and damage behaviour

     Article • Engineering Fracture Mechanics, December 2018, Elsevier

     Professor Vadim V Silberschmidt

104. 
     Dynamic interfacial fracture of a double cantilever beam

     Article • Engineering Fracture Mechanics, December 2018, Elsevier

     Professor Vadim V Silberschmidt

105. 
     Multi-objective optimization of ultrasonic-assisted magnetic abrasive finishing process

     Article • The International Journal of Advanced Manufacturing Technology, November 2018, Springer Science + Business Media

     Professor Vadim V Silberschmidt

106. 
     Improvements of machinability of aerospace-grade Inconel alloys with ultrasonically assisted hybrid machining

     Article • The International Journal of Advanced Manufacturing Technology, November 2018, Springer Science + Business Media

     Professor Vadim V Silberschmidt

107. 
     Damage accumulation in braided textiles-reinforced composites under repeated impacts: Experimental and numerical studies

     Article • Composite Structures, November 2018, Elsevier

     Professor Vadim V Silberschmidt

108. 
     Relations between Parameters of Fracture Processes on Different Scale Levels

     Article • Doklady Physics, November 2018, Pleiades Publishing Ltd

     Professor Vadim V Silberschmidt

109. 
     A diffusion-based approach for modelling crack tip behaviour under fatigue-oxidation conditions

     Article • International Journal of Fracture, September 2018, Springer Science + Business Media

     Professor Vadim V Silberschmidt

110. 
     Mechanically Robust Transparent Anti-Icing Coatings: Roles of Dispersion Status of Titanate Nanotubes

     Article • Advanced Materials Interfaces, July 2018, Wiley

     Professor Vadim V Silberschmidt

111. 
     Influence of Tool Material on Forces, Temperature and Surface Quality of Ti-15333 Alloy in CT and UAT

     Article • Scientia Iranica, July 2018, E-Ilmiah Penerbit Persatuan (E-scholarly Publishers Association)

     Professor Vadim V Silberschmidt

112. 
     Underwater explosion of cylindrical charge near plates: Analysis of pressure characteristics and cavitation effects

     Article • International Journal of Impact Engineering, July 2018, Elsevier

     Professor Vadim V Silberschmidt

113. 
     Hybrid machining process: experimental and numerical analysis of hot ultrasonically assisted turning

     Article • The International Journal of Advanced Manufacturing Technology, May 2018, Springer Science + Business Media

     Professor Vadim V Silberschmidt

114. 
     3D DDD modelling of dislocation–precipitate interaction in a nickel-based single crystal superalloy under cyclic deformation

     Article • The Philosophical Magazine A Journal of Theoretical Experimental and Applied Physics, March 2018, Taylor & Francis

     Professor Vadim V Silberschmidt

115. 
     A framework for design and optimization of tapered composite structures. Part II: Enhanced design framework with a global blending model

     Article • Composite Structures, March 2018, Elsevier

     Professor Vadim V Silberschmidt

116. 
     Experimental studies of shear bands in Zr-Cu metallic glass

     Article • Journal of Non-Crystalline Solids, March 2018, Elsevier

     Professor Vadim V Silberschmidt

117. 
     Transparent icephobic coatings using bio-based epoxy resin

     Article • Materials & Design, February 2018, Elsevier

     Professor Vadim V Silberschmidt

118. 
     Finite Element Modeling and Analysis of Ultrasonically-Assisted Drilling of Bone

     Article • January 2018, ACM (Association for Computing Machinery)

     Professor Vadim V Silberschmidt, Dr Khurshid Alam

119. 
     Microstructural evolution of 96.5Sn–3Ag–0.5Cu lead free solder reinforced with nickel-coated graphene reinforcements under large temperature gradient

     Article • Journal of Materials Science Materials in Electronics, January 2018, Springer Science + Business Media

     Professor Vadim V Silberschmidt

120. 
     8.14 Composites Under Dynamic Loads at High Velocities

     Article • January 2018, Elsevier

     Professor Vadim V Silberschmidt

121. 
     Discontinuous Finite Element Model of Hydrogels

     Article • January 2018, Elsevier

     Professor Vadim V Silberschmidt

122. 
     Numerical Simulation of Bone Cutting

     Article • January 2018, Elsevier

     Professor Vadim V Silberschmidt

123. 
     Simulation of Crack Propagation Under Mixed-Mode Loading

     Article • January 2018, Springer Science + Business Media

     Professor Vadim V Silberschmidt

124. 
     Ultrasonically assisted drilling of rocks

     Article • January 2018, American Institute of Physics

     Professor Vadim V Silberschmidt

125. 
     Dynamics and Thermodynamics of Fracture Mechanics

     Article • January 2018, Springer Science + Business Media

     Professor Vadim V Silberschmidt

126. 
     Ultrasonic Assisted Turning: A Comparative Study of Surface Integrity

     Article • January 2018, Springer Science + Business Media

     Professor Vadim V Silberschmidt

127. 
     Computational Evaluation of Artery Damage in Stent Deployment

     Article • Procedia Structural Integrity, January 2018, Elsevier

     Professor Vadim V Silberschmidt

128. 
     Dynamic interfacial fracture of a thin-layered structure

     Article • Procedia Structural Integrity, January 2018, Elsevier

     Professor Vadim V Silberschmidt

129. 
     Effect of hybrid machining on structural integrity of aerospace-grade materials

     Article • Procedia CIRP, January 2018, Elsevier

     Professor Vadim V Silberschmidt

130. 
     Experimental and Morphological Investigations of Fracture Behavior of PBT/TPEE

     Article • Procedia Structural Integrity, January 2018, Elsevier

     Professor Vadim V Silberschmidt

131. 
     Interfacial fracture of 3D-printed bioresorbable polymers

     Article • Procedia Structural Integrity, January 2018, Elsevier

     Professor Vadim V Silberschmidt

132. 
     Numerical and analytical model of long tubular bones with anisotropic distribution of elastic properties

     Article • Procedia Structural Integrity, January 2018, Elsevier

     Professor Vadim V Silberschmidt

133. 
     Ultrasonically assisted drilling of aerospace CFRP/Ti stacks

     Article • Procedia CIRP, January 2018, Elsevier

     Professor Vadim V Silberschmidt

134. 
     Braided textile composites for sports protection: Energy absorption and delamination in impact modelling

     Article • Materials & Design, December 2017, Elsevier

     Professor Vadim V Silberschmidt

135. 
     Low cycle fatigue of a directionally solidified nickel-based superalloy: Testing, characterisation and modelling

     Article • Materials Science and Engineering A, December 2017, Elsevier

     Professor Vadim V Silberschmidt

136. 
     Effects of the Manufacturing Process on the Reliability of the Multilayer Structure in MetalMUMPs Actuators: Residual Stresses and Variation of Design Parameters

     Article • Micromachines, November 2017, MDPI AG

     Professor Vadim V Silberschmidt

137. 
     Application of Smoothed Particle Hydrodynamics in analysis of shaped-charge jet penetration caused by underwater explosion

     Article • Ocean Engineering, November 2017, Elsevier

     Professor Vadim V Silberschmidt

138. 
     Improved analytical prediction of chip formation in orthogonal cutting of titanium alloy Ti6Al4V

     Article • International Journal of Mechanical Sciences, November 2017, Elsevier

     Professor Vadim V Silberschmidt

139. 
     Modeling of normal force and finishing torque considering shearing and ploughing effects in ultrasonic assisted magnetic abrasive finishing process with sintered magnetic abrasive powder

     Article • Wear, November 2017, Elsevier

     Professor Vadim V Silberschmidt

140. 
     Relative behaviour of premature failures in adhesively plated RC beam using controllable and existing parameters

     Article • Composite Structures, November 2017, Elsevier

     Professor Vadim V Silberschmidt

141. 
     Modeling of finishing force and torque in ultrasonic-assisted magnetic abrasive finishing process

     Article • Proceedings of the Institution of Mechanical Engineers Part B Journal of Engineering Manufacture, October 2017, SAGE Publications

     Professor Vadim V Silberschmidt

142. 
     Comparison of plane-stress, generalized-plane-strain and 3D FEM elastic–plastic analyses of thick-walled cylinders subjected to radial thermal gradient

     Article • International Journal of Mechanical Sciences, October 2017, Elsevier

     Professor Vadim V Silberschmidt

143. 
     Temperature-dependent crystal-plasticity model for magnesium: A bottom-up approach

     Article • Mechanics of Materials, October 2017, Elsevier

     Professor Vadim V Silberschmidt

144. 
     Modelling of Damage Evolution in Braided Composites: Recent Developments

     Article • Mechanics of Advanced Materials and Modern Processes, August 2017, Springer Science + Business Media

     Professor Vadim V Silberschmidt

145. 
     Dynamic Behaviour of β-Ti-15333 in Ultrasonically Assisted Turning: Experimental and Numerical Analysis

     Article • Scientia Iranica, August 2017, E-Ilmiah Penerbit Persatuan (E-scholarly Publishers Association)

     Professor Vadim V Silberschmidt

146. 
     Modelling and Simulations of Nanoindentation in Single Crystals

     Article • August 2017, Wiley

     Professor Vadim V Silberschmidt

147. 
     Nanoindentation in Metallic Glasses

     Article • August 2017, Wiley

     Professor Vadim V Silberschmidt

148. 
     Numerical Representation of Multiple Premature Failures in Steel-Plated RC Beams

     Article • International Journal of Computational Methods, August 2017, World Scientific Pub Co Pte Lt

     Professor Vadim V Silberschmidt

149. 
     Assessing stiffness of nanofibres in bacterial cellulose hydrogels: Numerical-experimental framework

     Article • Materials Science and Engineering C, August 2017, Elsevier

     Professor Vadim V Silberschmidt

150. 
     Experimental and computational studies of poly-L-lactic acid for cardiovascular applications: recent progress

     Article • Mechanics of Advanced Materials and Modern Processes, July 2017, Springer Science + Business Media

     Professor Vadim V Silberschmidt

151. 
     Experimental Study on the Effect of Point Angle on Force and Temperature in Ultrasonically Assisted Bone Drilling

     Article • Journal of Medical and Biological Engineering, July 2017, Springer Science + Business Media

     Professor Vadim V Silberschmidt

152. 
     Microstructural evolution of Ti6Al4V in ultrasonically assisted cutting: Numerical modelling and experimental analysis

     Article • Ultrasonics, July 2017, Elsevier

     Professor Vadim V Silberschmidt

153. 
     174 Comparison of the mechanical performance of polymeric and metallic scaffolds – testing and modelling

     Article • Heart, June 2017, BMJ

     Professor Vadim V Silberschmidt

154. 
     Analysis of pulsed electroplasticity in metals

     Article • June 2017, Institute of Electrical & Electronics Engineers (IEEE)

     Professor Vadim V Silberschmidt

155. 
     Magneto-forming studies

     Article • June 2017, Institute of Electrical & Electronics Engineers (IEEE)

     Professor Vadim V Silberschmidt

156. 
     Computational modelling of wounded tissue subject to negative pressure wound therapy following trans-femoral amputation

     Article • Biomechanics and Modeling in Mechanobiology, May 2017, Springer Science + Business Media

     Professor Vadim V Silberschmidt

157. 
     Evaluation of the chemical and biomechanical viscoelastic properties of decellularised tracheal scaffolds

     Article • Cytotherapy, May 2017, Elsevier

     Professor Vadim V Silberschmidt

158. 
     Micro CT Analysis of Dynamic Damage in Laminates: Impact vs. blast loading

     Article • Journal of Physics Conference Series, May 2017, Institute of Physics Publishing

     Professor Vadim V Silberschmidt

159. 
     Temperature-dependent mechanical behaviour of PMMA: Experimental analysis and modelling

     Article • Polymer Testing, April 2017, Elsevier

     Professor Vadim V Silberschmidt

160. 
     Failure analysis of plain woven glass/epoxy laminates: Comparison of off-axis and biaxial tension loadings

     Article • Polymer Testing, April 2017, Elsevier

     Professor Vadim V Silberschmidt

161. 
     Enhanced gradient crystal-plasticity study of size effects in aβ-titanium alloy

     Article • Modelling and Simulation in Materials Science and Engineering, March 2017, Institute of Physics Publishing

     Professor Vadim V Silberschmidt

162. 
     Retardation effects due to overloads in aluminium-alloy aeronautical components

     Article • Fatigue & Fracture of Engineering Materials & Structures, February 2017, Wiley

     roberto citarella, Professor Vadim V Silberschmidt

163. 
     Controlled failure warning and mitigation of prematurely failing beam through adhesive

     Article • Composite Structures, February 2017, Elsevier

     Professor Vadim V Silberschmidt

164. 
     Linear Ultrasonic Motor for Absolute Gravimeter

     Article • Ultrasonics, February 2017, Elsevier

     Professor Vadim V Silberschmidt

165. 
     Incorporation and evolution of ZrO2 nano-particles in Pt-modified aluminide coating for high temperature applications

     Article • Surface and Coatings Technology, February 2017, Elsevier

     Professor Vadim V Silberschmidt

166. 
     Damage response of steel plate to underwater explosion: Effect of shaped charge liner

     Article • International Journal of Impact Engineering, January 2017, Elsevier

     Professor Vadim V Silberschmidt

167. 
     Dynamic damage in woven carbon/epoxy composites due to air blast

     Article • Procedia Structural Integrity, January 2017, Elsevier

     Professor Vadim V Silberschmidt

168. 
     Editorial

     Article • Procedia Structural Integrity, January 2017, Elsevier

     Professor Vadim V Silberschmidt

169. 
     Effect of micro-morphology of cortical bone tissue on fracture toughness and crack propagation

     Article • Procedia Structural Integrity, January 2017, Elsevier

     Professor Vadim V Silberschmidt

170. 
     Effect of surgical defect localization on ultimate load-bearing capacity of human femur: finite-element energy-based assessment

     Article • Procedia Structural Integrity, January 2017, Elsevier

     Professor Vadim V Silberschmidt

171. 
     Estimation of cutting forces in conventional and ultrasonic-vibration assisted turning using inverse modelling

     Article • International Journal of Additive and Subtractive Materials Manufacturing, January 2017, Inderscience Publishers

     Professor Vadim V Silberschmidt

172. 
     Impact damage in woven carbon fibre/epoxy laminates: analysis of damage and dynamic strain fields

     Article • Procedia Engineering, January 2017, Elsevier

     Professor Vadim V Silberschmidt

173. 
     Notches in fibrous materials: micro-mechanisms of deformation and damage

     Article • Procedia Structural Integrity, January 2017, Elsevier

     Professor Vadim V Silberschmidt

174. 
     Estimation of cutting forces in conventional and ultrasonic-vibration assisted turning using inverse modelling

     Article • International Journal of Additive and Subtractive Materials Manufacturing, January 2017, Inderscience Publishers

     Professor Vadim V Silberschmidt

175. 
     Computational assessment of residual formability in sheet metal forming processes for sustainable recycling

     Article • International Journal of Mechanical Sciences, December 2016, Elsevier

     Professor Vadim V Silberschmidt

176. 
     Modelling plastic deformation in a single-crystal nickel-based superalloy using discrete dislocation dynamics

     Article • Mechanics of Advanced Materials and Modern Processes, November 2016, Springer Science + Business Media

     Professor Vadim V Silberschmidt

177. 
     SPH-FEM simulation of shaped-charge jet penetration into double hull: A comparison study for steel and SPS

     Article • Composite Structures, November 2016, Elsevier

     Professor Vadim V Silberschmidt

178. 
     Rotary ultrasonic bone drilling: Improved pullout strength and reduced damage

     Article • Medical Engineering & Physics, November 2016, Elsevier

     Professor Vadim V Silberschmidt

179. 
     Micro-cutting of single-crystal metal: Finite-element analysis of deformation and material removal

     Article • International Journal of Mechanical Sciences, November 2016, Elsevier

     Professor Vadim V Silberschmidt

180. 
     Failure analysis of a frangible composite cover: A transient-dynamics study

     Article • Journal of Composite Materials, October 2016, SAGE Publications

     Professor Vadim V Silberschmidt

181. 
     Generation of higher harmonics in longitudinal vibration of beams with breathing cracks

     Article • Journal of Sound and Vibration, October 2016, Elsevier

     Professor Vadim V Silberschmidt

182. 
     Analysis of tool wear in ultrasonically assisted turning of  -Ti-15V-3Al-3Cr-3Sn alloy

     Article • Scientia Iranica, October 2016, E-Ilmiah Penerbit Persatuan (E-scholarly Publishers Association)

     Professor Vadim V Silberschmidt

183. 
     Size-dependent crystal plasticity: From micro-pillar compression to bending

     Article • Mechanics of Materials, September 2016, Elsevier

     Professor Vadim V Silberschmidt

184. 
     Non-destructive defect detection for MEMS devices using transient thermography

     Article • September 2016, Institute of Electrical & Electronics Engineers (IEEE)

     Professor Vadim V Silberschmidt

185. 
     Optical properties of graphene-based materials in transparent polymer matrices

     Article • Applied Physics Letters, August 2016, American Institute of Physics

     Professor Vadim V Silberschmidt

186. 
     Thermo-migration behavior of SAC305 lead-free solder reinforced with fullerene nanoparticles

     Article • Journal of Materials Science, August 2016, Springer Science + Business Media

     Professor Vadim V Silberschmidt

187. 
     Numerical assessment of residual formability in sheet metal products: towards design for sustainability

     Article • Journal of Physics Conference Series, August 2016, Institute of Physics Publishing

     Professor Vadim V Silberschmidt

188. 
     Effect of Machining on Shear-Zone Microstructure in Ti-15V-3Cr-3Al-3Sn: Conventional and Ultrasonically Assisted Turning

     Article • Journal of Materials Engineering and Performance, July 2016, Springer Science + Business Media

     Professor Vadim V Silberschmidt

189. 
     Retained ratio of reinforcement in SAC305 composite solder joints: effect of reinforcement type, processing and reflow cycle

     Article • Soldering & Surface Mount Technology, June 2016, Emerald

     Professor Vadim V Silberschmidt

190. 
     Through-thickness stress relaxation in bacterial cellulose hydrogel

     Article • Journal of the Mechanical Behavior of Biomedical Materials, June 2016, Elsevier

     Professor Vadim V Silberschmidt

191. 
     Sequential permutation table method for optimization of stacking sequence in composite laminates

     Article • Composite Structures, May 2016, Elsevier

     Professor Vadim V Silberschmidt

192. 
     Performance of Sn–3.0Ag–0.5Cu composite solder with TiC reinforcement: Physical properties, solderability and microstructural evolution under isothermal ageing

     Article • Journal of Alloys and Compounds, May 2016, Elsevier

     Professor Vadim V Silberschmidt

193. 
     A framework for design and optimization of tapered composite structures. Part I: From individual panel to global blending structure

     Article • Composite Structures, May 2016, Elsevier

     Professor Vadim V Silberschmidt

194. 
     Effect of microstructure on anomalous strain-rate-dependent behaviour of bacterial cellulose hydrogel

     Article • Materials Science and Engineering C, May 2016, Elsevier

     Professor Vadim V Silberschmidt

195. 
     Noncontact blood perfusion mapping in clinical applications

     Article • April 2016, SPIE

     Professor Vadim V Silberschmidt

196. 
     Material model for modeling clay at high strain rates

     Article • International Journal of Impact Engineering, April 2016, Elsevier

     Professor Vadim V Silberschmidt

197. 
     Strength prediction for bi-axial braided composites by a multi-scale modelling approach

     Article • Journal of Materials Science, March 2016, Springer Science + Business Media

     Professor Vadim V Silberschmidt

198. 
     Effect of graphene-oxide enhancement on large-deflection bending performance of thermoplastic polyurethane elastomer

     Article • Composites Part B Engineering, March 2016, Elsevier

     Professor Vadim V Silberschmidt

199. 
     Effect of through-thickness compression on in-plane tensile strength of glass/epoxy composites: Experimental study

     Article • Polymer Testing, February 2016, Elsevier

     Professor Vadim V Silberschmidt

200. 
     Effect of morphological state of graphene on mechanical properties of nanocomposites

     Article • Journal of Materials Science, January 2016, Springer Science + Business Media

     Professor Vadim V Silberschmidt

201. 
     Microstructures and properties of new Sn–Ag–Cu lead-free solder reinforced with Ni-coated graphene nanosheets

     Article • Journal of Alloys and Compounds, January 2016, Elsevier

     Professor Vadim V Silberschmidt

202. 
     Time-dependent rheological behaviour of bacterial cellulose hydrogel

     Article • Materials Science and Engineering C, January 2016, Elsevier

     Professor Vadim V Silberschmidt

203. 
     COMPUTATIONAL MODELLING OF MECHANICAL BEHAVIOR OF BIOLOGICAL TISSUES FOR BIOMEDICAL APPLICATIONS

     Article • January 2016, ECCOMAS

     Professor Vadim V Silberschmidt

204. 
     Crystal-Plasticity Simulation of Micromachining of Single-Crystal Metal: Methodology and Analysis

     Article • January 2016, Springer Science + Business Media

     Professor Vadim V Silberschmidt

205. 
     Dynamic Fracture in Carbon-fibre Composites: Effect of Steel and Ice Projectiles

     Article • Procedia Structural Integrity, January 2016, Elsevier

     Professor Vadim V Silberschmidt

206. 
     Dynamic damage in FRPs

     Article • January 2016, Elsevier

     Professor Vadim V Silberschmidt

207. 
     Dynamic fracture in carbon-fibre composites: Air-blast loading

     Article • Procedia Structural Integrity, January 2016, Elsevier

     Professor Vadim V Silberschmidt

208. 
     Dynamic large-deflection bending of laminates

     Article • January 2016, Elsevier

     Professor Vadim V Silberschmidt

209. 
     Formation of microcracks near surgical defect in femur: Assessment of ultimate loading conditions

     Article • Scientific Letters of Rzeszow University of Technology - Mechanics, January 2016, Rzeszow University of Technology

     Professor Vadim V Silberschmidt

210. 
     Fracture Behaviour of Bacterial Cellulose Hydrogel: Microstructural Effect

     Article • Procedia Structural Integrity, January 2016, Elsevier

     Professor Vadim V Silberschmidt

211. 
     Hybrid Cutting of Bio-tissues

     Article • Procedia CIRP, January 2016, Elsevier

     Professor Vadim V Silberschmidt

212. 
     Introduction

     Article • January 2016, Elsevier

     Professor Vadim V Silberschmidt

213. 
     Ultrasonically Assisted Cutting of Bio-tissues in Microtomy

     Article • Physics Procedia, January 2016, Elsevier

     Professor Vadim V Silberschmidt

214. 
     Ultrasonically-assisted Polymer Molding: An Evaluation

     Article • Physics Procedia, January 2016, Elsevier

     Professor Vadim V Silberschmidt

215. 
     Dynamic bending behaviour of woven composites for sports products: Experiments and damage analysis

     Article • Materials & Design, December 2015, Elsevier

     Professor Vadim V Silberschmidt

216. 
     Viscoelasticity of periodontal ligament: an analytical model

     Article • Mechanics of Advanced Materials and Modern Processes, November 2015, Springer Science + Business Media

     Professor Vadim V Silberschmidt

217. 
     Shear strength and fracture toughness of carbon fibre/epoxy interface: effect of surface treatment

     Article • Materials & Design, November 2015, Elsevier

     Professor Vadim V Silberschmidt

218. 
     Chemical functionalization of graphene oxide for improving mechanical and thermal properties of polyurethane composites

     Article • Materials & Design, November 2015, Elsevier

     Professor Vadim V Silberschmidt

219. 
     In-vitro experimental analysis and numerical study of temperature in bone drilling

     Article • Technology and Health Care, October 2015, IOS Press

     Professor Vadim V Silberschmidt

220. 
     Strain-gradient crystal-plasticity modelling of micro-cutting of b.c.c. single crystal

     Article • Meccanica, October 2015, Springer Science + Business Media

     Professor Vadim V Silberschmidt

221. 
     A new low-temperature hermetic composite edge seal for the fabrication of triple vacuum glazing

     Article • Vacuum, October 2015, Elsevier

     Professor Vadim V Silberschmidt

222. 
     Enhanced ultrasonically assisted turning of a β-titanium alloy

     Article • Applied Mechanics and Materials, October 2015, Trans Tech Publications

     Professor Vadim V Silberschmidt, Dr Riaz Muhammad, Dr Khurshid Alam

223. 
     Variation of cutting forces in machining of f.c.c. single crystals

     Article • Acta Mechanica, August 2015, Springer Science + Business Media

     Professor Vadim V Silberschmidt

224. 
     Crack initiation and propagation in ductile specimens with notches: experimental and numerical study

     Article • Acta Mechanica, July 2015, Springer Science + Business Media

     Professor Vadim V Silberschmidt

225. 
     Damage mechanisms of random fibrous networks

     Article • Journal of Physics Conference Series, July 2015, Institute of Physics Publishing

     Professor Vadim V Silberschmidt

226. 
     Ballistic damage in hybrid composite laminates

     Article • Journal of Physics Conference Series, July 2015, Institute of Physics Publishing

     Professor Vadim V Silberschmidt, Niranjan Naik

227. 
     Inelastic behaviour of bacterial cellulose hydrogel: In aqua cyclic tests

     Article • Polymer Testing, July 2015, Elsevier

     Professor Vadim V Silberschmidt

228. 
     Characterisation of mechanical behaviour and damage analysis of 2D woven composites under bending

     Article • Composites Part B Engineering, June 2015, Elsevier

     Professor Vadim V Silberschmidt

229. 
     Analysis of impact induced damage in composites for wind turbine blades

     Article • June 2015, Institute of Electrical & Electronics Engineers (IEEE)

     Professor Vadim V Silberschmidt

230. 
     Copper coin-embedded printed circuit board for heat dissipation: manufacture, thermal simulation and reliability

     Article • Circuit World, May 2015, Emerald

     Dr Yuanming Chen, Professor Vadim V Silberschmidt

231. 
     Effects of surface-functionalized aluminum nitride on thermal, electrical, and mechanical behaviors of polyarylene ether nitrile-based composites

     Article • Polymer Composites, April 2015, Wiley

     Dr Yuanming Chen, Professor Vadim V Silberschmidt

232. 
     Multiphysics modeling approach for micro electro–thermo–mechanical actuator: Failure mechanisms coupled analysis

     Article • Microelectronics Reliability, April 2015, Elsevier

     Professor Vadim V Silberschmidt

233. 
     Nonwovens modelling: a review of finite-element strategies

     Article • Journal of the Textile Institute, March 2015, Taylor & Francis

     Dr farukh farukh FARUKG, Professor Vadim V Silberschmidt

234. 
     Preparation, characterization and properties of polycaprolactone diol-functionalized multi-walled carbon nanotube/thermoplastic polyurethane composite

     Article • Composites Part A Applied Science and Manufacturing, March 2015, Elsevier

     Professor Vadim V Silberschmidt

235. 
     Repair of damage in aircraft composite sound-absorbing panels

     Article • Composite Structures, February 2015, Elsevier

     Professor Vadim V Silberschmidt

236. 
     Properties and application of polyimide-based composites by blending surface functionalized boron nitride nanoplates

     Article • Journal of Applied Polymer Science, January 2015, Wiley

     Dr Yuanming Chen, Professor Vadim V Silberschmidt

237. 
     Mechanical analysis of bi-component-fibre nonwovens: Finite-element strategy

     Article • Composites Part B Engineering, January 2015, Elsevier

     Dr farukh farukh FARUKG, Professor Vadim V Silberschmidt

238. 
     Finite element analysis of hypervelocity impact behaviour of CFRP-Al/HC sandwich panel

     Article • EPJ Web of Conferences, January 2015, EDP Sciences

     Professor Vadim V Silberschmidt

239. 
     Effect of micromorphology of cortical bone tissue on crack propagation under dynamic loading

     Article • EPJ Web of Conferences, January 2015, EDP Sciences

     Professor Vadim V Silberschmidt

240. 
     Modelling of Vibration Assisted Machining f.c.c Single Crystal

     Article • Procedia CIRP, January 2015, Elsevier

     Professor Vadim V Silberschmidt

241. 
     Characterization and application of aggregated porous copper oxide flakes for cupric source of copper electrodeposition

     Article • Materials Letters, January 2015, Elsevier

     Professor Vadim V Silberschmidt

242. 
     Bulk Metallic Glasses: Mechanical Properties and Performance

     Article • January 2015, Springer Science + Business Media

     Professor Vadim V Silberschmidt

243. 
     Constitutive Properties of Pure Indium in Wide Temperature Range

     Article • January 2015, Springer Science + Business Media

     Professor Vadim V Silberschmidt

244. 
     Crystalline Deformation in the Small Scale

     Article • January 2015, Springer Science + Business Media

     Professor Vadim V Silberschmidt

245. 
     Deformation and Damage of Thermally Bonded Nonwoven Networks

     Article • January 2015, Springer Science + Business Media

     Professor Vadim V Silberschmidt

246. 
     Dynamic fractures of adhesively bonded carbon fibre-reinforced polymeric joints

     Article • January 2015, Elsevier

     Professor Vadim V Silberschmidt

247. 
     Finite Element Modelling of 2D Brittle Fracture: The Phase-Field Approach

     Article • January 2015, Springer Science + Business Media

     Professor Vadim V Silberschmidt

248. 
     Fracture of Cortical Bone Tissue

     Article • January 2015, Springer Science + Business Media

     Professor Vadim V Silberschmidt

249. 
     Mechanics of Advanced Materials

     Article • January 2015, Springer Science + Business Media

     Professor Vadim V Silberschmidt

250. 
     Metamaterials with Negative Poisson’s Ratio: A Review of Mechanical Properties and Deformation Mechanisms

     Article • January 2015, Springer Science + Business Media

     Professor Vadim V Silberschmidt

251. 
     Nonlinear Vibro-acoustic Interactions for Crack Detection in Beams

     Article • January 2015, DEStech Publications

     Professor Vadim V Silberschmidt

252. 
     Assessment of structural integrity of subsea wellhead system: analytical and numerical study

     Article • Frattura ed Integrità Strutturale, December 2014, Gruppo Italiano Frattura

     Professor Vadim V Silberschmidt

253. 
     Indentation-induced deformation localisation in Zr–Cu-based metallic glass

     Article • Journal of Alloys and Compounds, December 2014, Elsevier

     Professor Vadim V Silberschmidt

254. 
     Numerical analysis of the interactive damage mechanisms in two-dimensional carbon fabric-reinforced thermoplastic composites under low velocity impacts

     Article • Journal of Composite Materials, November 2014, SAGE Publications

     Professor Vadim V Silberschmidt

255. 
     Numerical modelling of micro-machining of f.c.c. single crystal: Influence of strain gradients

     Article • Computational Materials Science, November 2014, Elsevier

     Professor Vadim V Silberschmidt

256. 
     Mechanical behaviour of nonwovens: Analysis of effect of manufacturing parameters with parametric computational model

     Article • Computational Materials Science, November 2014, Elsevier

     Professor Vadim V Silberschmidt

257. 
     Effect of ultrasonically-assisted drilling on carbon-fibre-reinforced plastics

     Article • Journal of Sound and Vibration, November 2014, Elsevier

     Professor Vadim V Silberschmidt

258. 
     Influence of strain gradients on lattice rotation in nano-indentation experiments: A numerical study

     Article • Materials Science and Engineering A, July 2014, Elsevier

     Professor Vadim V Silberschmidt

259. 
     Tailoring structure of inclusion with strain-induced closure to reduce Poisson's ratio of composite materials

     Article • Journal of Applied Physics, June 2014, American Institute of Physics

     Professor Vadim V Silberschmidt

260. 
     Optimising curvature of carbon fibre-reinforced polymer composite panel for improved blast resistance: Finite-element analysis

     Article • Materials & Design (1980-2015), May 2014, Elsevier

     Professor Vadim V Silberschmidt

261. 
     Numerical analysis of progressive damage in nonwoven fibrous networks under tension

     Article • International Journal of Solids and Structures, May 2014, Elsevier

     Professor Vadim V Silberschmidt

262. 
     DAMAGE IN FIBRE-REINFORCED LAMINATES UNDER DYNAMIC LOADING

     Article • May 2014, Editora Edgard Blucher, Ltda.

     Professor Vadim V Silberschmidt

263. 
     Analysis of a free machining α+β titanium alloy using conventional and ultrasonically assisted turning

     Article • Journal of Materials Processing Technology, April 2014, Elsevier

     Professor Vadim V Silberschmidt

264. 
     Analysis of temperature in conventional and ultrasonically-assisted drilling of cortical bone with infrared thermography

     Article • Technology and Health Care, April 2014, IOS Press

     Professor Vadim V Silberschmidt

265. 
     Comparative study of conventional and ultrasonically-assisted bone drilling

     Article • Technology and Health Care, April 2014, IOS Press

     Professor Vadim V Silberschmidt

266. 
     Penetration of cutting tool into cortical bone: Experimental and numerical investigation of anisotropic mechanical behaviour

     Article • Journal of Biomechanics, March 2014, Elsevier

     Professor Vadim V Silberschmidt

267. 
     Numerical analysis of composite structure with in-plane isotropic negative Poisson’s ratio: Effects of materials properties and geometry features of inclusions

     Article • Composites Part B Engineering, March 2014, Elsevier

     Professor Vadim V Silberschmidt

268. 
     Flexural Properties of Polyamides: Influence of Strain Rate, Friction and Moulding-Induced Anisotropy

     Article • Key Engineering Materials, March 2014, Trans Tech Publications

     Professor Vadim V Silberschmidt

269. 
     Ti Alloy with Enhanced Machinability in UAT Turning

     Article • Metallurgical and Materials Transactions A, February 2014, Springer Science + Business Media

     Professor Vadim V Silberschmidt

270. 
     Large deformation of thermally bonded random fibrous networks: microstructural changes and damage

     Article • Journal of Materials Science, February 2014, Springer Science + Business Media

     Dr farukh farukh FARUKG, Professor Vadim V Silberschmidt

271. 
     Modelling of nonlinear crack–wave interactions for damage detection based on ultrasound—A review

     Article • Journal of Sound and Vibration, February 2014, Elsevier

     Professor Vadim V Silberschmidt

272. 
     Hybrid equilibrium finite element formulation for composite beams with partial interaction

     Article • Composite Structures, February 2014, Elsevier

     Professor Vadim V Silberschmidt

273. 
     Evolution and interaction of damage modes in fabric-reinforced composites under dynamic flexural loading

     Article • Composites Science and Technology, February 2014, Elsevier

     Professor Vadim V Silberschmidt

274. 
     Thermally enhanced ultrasonically assisted machining of Ti alloy

     Article • CIRP Journal of Manufacturing Science and Technology, January 2014, Elsevier

     Professor Vadim V Silberschmidt

275. 
     Surface-roughness Improvement in Ultrasonically Assisted Turning

     Article • Procedia CIRP, January 2014, Elsevier

     Professor Vadim V Silberschmidt

276. 
     Damage analysis of carbon fabric-reinforced composites under dynamic bending

     Article • January 2014, Institute of Electrical & Electronics Engineers (IEEE)

     Professor Vadim V Silberschmidt

277. 
     Boron Carbide-Based Nanostructured Composite by Spark Plasma Sintering

     Article • January 2014, Research Publishing Services

     Professor Vadim V Silberschmidt

278. 
     Fracture process in cortical bone: X-FEM analysis of microstructured models

     Article • January 2014, Springer Science + Business Media

     Professor Vadim V Silberschmidt

279. 
     Modelling fracture processes in bones

     Article • January 2014, Elsevier

     Professor Vadim V Silberschmidt

280. 
     Ultrasonically Assisted Machining of Titanium Alloys

     Article • January 2014, Springer Science + Business Media

     Professor Vadim V Silberschmidt

281. 
     Bio-inspired structured boron carbide-boron nitride composite by reactive spark plasma sintering

     Article • Virtual and Physical Prototyping, December 2013, Taylor & Francis

     Professor Vadim V Silberschmidt

282. 
     Indentation studies in b.c.c. crystals with enhanced model of strain-gradient crystal plasticity

     Article • Computational Materials Science, November 2013, Elsevier

     Professor Vadim V Silberschmidt

283. 
     Finite element modelling of fibrous networks: Analysis of strain distribution in fibres under tensile load

     Article • Computational Materials Science, November 2013, Elsevier

     Professor Vadim V Silberschmidt

284. 
     Three-Dimensional Analysis of the Effect of Material Randomness on the Damage Behaviour of CFRP Laminates with Stochastic Cohesive-Zone Elements

     Article • Applied Composite Materials, October 2013, Springer Science + Business Media

     Professor Vadim V Silberschmidt

285. 
     Erratum to: A composite material with Poisson’s ratio tunable from positive to negative values: an experimental and numerical study

     Article • Journal of Materials Science, October 2013, Springer Science + Business Media

     Professor Vadim V Silberschmidt

286. 
     FE/SPH modelling of orthogonal micro-machining of f.c.c. single crystal

     Article • Computational Materials Science, October 2013, Elsevier

     Professor Vadim V Silberschmidt

287. 
     Analysis of rate-dependent tensile properties of polypropylene fibres used in thermally bonded nonwovens

     Article • Journal of the Textile Institute, September 2013, Taylor & Francis

     Professor Vadim V Silberschmidt

288. 
     Thermo-Mechanical Investigation of Ultra-High Molecular Weight Polyethylene for High Strain-Rate Applications

     Article • Key Engineering Materials, September 2013, Trans Tech Publications

     Professor Vadim V Silberschmidt

289. 
     Enhanced ultrasonically assisted turning of a β-titanium alloy

     Article • Ultrasonics, September 2013, Elsevier

     Professor Vadim V Silberschmidt

290. 
     Analysis of fracture processes in cortical bone tissue

     Article • Engineering Fracture Mechanics, September 2013, Elsevier

     Professor Vadim V Silberschmidt

291. 
     A composite material with Poisson’s ratio tunable from positive to negative values: an experimental and numerical study

     Article • Journal of Materials Science, August 2013, Springer Science + Business Media

     Professor Vadim V Silberschmidt

292. 
     Vibration-assisted machining of single crystal

     Article • Journal of Physics Conference Series, July 2013, Institute of Physics Publishing

     Professor Vadim V Silberschmidt

293. 
     Ultrasonically assisted drilling: A finite-element model incorporating acoustic softening effects

     Article • Journal of Physics Conference Series, July 2013, Institute of Physics Publishing

     Professor Vadim V Silberschmidt

294. 
     Study of ultrasonically assisted turning of stainless steel and brass alloys

     Article • Journal of Physics Conference Series, July 2013, Institute of Physics Publishing

     Professor Vadim V Silberschmidt

295. 
     Quasi-static and dynamic deformation behaviour of Zr-based bulk metallic glass

     Article • Journal of Physics Conference Series, July 2013, Institute of Physics Publishing

     Professor Vadim V Silberschmidt

296. 
     Numerical study of strain-rate effect in cold rolls forming of steel

     Article • Journal of Physics Conference Series, July 2013, Institute of Physics Publishing

     Professor Vadim V Silberschmidt

297. 
     Numerical analysis of dynamic out-of-plane loading of nonwovens

     Article • Journal of Physics Conference Series, July 2013, Institute of Physics Publishing

     Professor Vadim V Silberschmidt

298. 
     Modelling the dynamic behaviour of hard-to-cut alloys under conditions of vibro-impact cutting

     Article • Journal of Physics Conference Series, July 2013, Institute of Physics Publishing

     Professor Vadim V Silberschmidt

299. 
     Mechanical and thermal characterisation of poly (l-lactide) composites reinforced with hemp fibres

     Article • Journal of Physics Conference Series, July 2013, Institute of Physics Publishing

     Professor Vadim V Silberschmidt

300. 
     Effect of random microstructure on crack propagation in cortical bone tissue under dynamic loading

     Article • Journal of Physics Conference Series, July 2013, Institute of Physics Publishing

     Professor Vadim V Silberschmidt

301. 
     Effect of crack induced nonlinearity on dynamics of structures: application to structural health monitoring

     Article • Journal of Physics Conference Series, July 2013, Institute of Physics Publishing

     Professor Vadim V Silberschmidt

302. 
     International Symposium on Dynamic Deformation and Fracture of Advanced Materials (D2FAM 2013)

     Article • Journal of Physics Conference Series, July 2013, Institute of Physics Publishing

     Professor Vadim V Silberschmidt

303. 
     Damage and fracture in fabric-reinforced composites under quasi-static and dynamic bending

     Article • Journal of Physics Conference Series, July 2013, Institute of Physics Publishing

     Professor Vadim V Silberschmidt

304. 
     Component based modelling of piezoelectric ultrasonic actuators for machining applications

     Article • Journal of Physics Conference Series, July 2013, Institute of Physics Publishing

     Professor Vadim V Silberschmidt, Dr Mohammad Salah

305. 
     Blast response of curved carbon/epoxy composite panels: Experimental study and finite-element analysis

     Article • Journal of Physics Conference Series, July 2013, Institute of Physics Publishing

     Professor Vadim V Silberschmidt

306. 
     Ballistic impact behaviour of woven fabric composite: Finite element analysis and experiments

     Article • Journal of Physics Conference Series, July 2013, Institute of Physics Publishing

     Professor Vadim V Silberschmidt

307. 
     Diagnostic tool for structural health monitoring: effect of material nonlinearity and vibro-impact process

     Article • Journal of Physics Conference Series, July 2013, Institute of Physics Publishing

     Professor Vadim V Silberschmidt

308. 
     Ultrasonically Assisted Drilling: Machining towards Improved Structural Integrity in Carbon/Epoxy Composites

     Article • Key Engineering Materials, July 2013, Trans Tech Publications

     Professor Vadim V Silberschmidt

309. 
     Significantly retarded interfacial reaction between an electroless Ni–W–P metallization and lead-free Sn–3.5Ag solder

     Article • Journal of Alloys and Compounds, July 2013, Elsevier

     Professor Vadim V Silberschmidt

310. 
     Effect of Plate Curvature on Blast Response of Carbon/Epoxy Composite

     Article • Key Engineering Materials, July 2013, Trans Tech Publications

     Professor Vadim V Silberschmidt

311. 
     Damage and fracture in carbon fabric reinforced composites under impact bending

     Article • Composite Structures, July 2013, Elsevier

     Professor Vadim V Silberschmidt

312. 
     Variability and anisotropy of mechanical behavior of cortical bone in tension and compression

     Article • Journal of the Mechanical Behavior of Biomedical Materials, May 2013, Elsevier

     Professor Vadim V Silberschmidt

313. 
     Corrigendum to ‘Tensile properties of semi-crystalline thermoplastic polymers: Effects of temperature and strain rates’ [Polymer Testing 32/2 (2013) 413–425]

     Article • Polymer Testing, May 2013, Elsevier

     Professor Vadim V Silberschmidt

314. 
     Analysis of forces in conventional and ultrasonically assisted plane cutting of cortical bone

     Article • Proceedings of the Institution of Mechanical Engineers Part H Journal of Engineering in Medicine, April 2013, SAGE Publications

     Professor Vadim V Silberschmidt

315. 
     Characterisation and numerical modelling of complex deformation behaviour in thermally bonded nonwovens

     Article • Computational Materials Science, April 2013, Elsevier

     Dr farukh farukh FARUKG, Professor Vadim V Silberschmidt

316. 
     Tensile properties of semi-crystalline thermoplastic polymers: Effects of temperature and strain rates

     Article • Polymer Testing, April 2013, Elsevier

     Professor Vadim V Silberschmidt, Dr Liviu Marsavina

317. 
     Drilling in carbon/epoxy composites: Experimental investigations and finite element implementation

     Article • Composites Part A Applied Science and Manufacturing, April 2013, Elsevier

     Professor Vadim V Silberschmidt

318. 
     Control of ultrasonic transducers for machining applications

     Article • April 2013, Institute of Electrical & Electronics Engineers (IEEE)

     Professor Vadim V Silberschmidt, Dr Mohammad Salah

319. 
     Parametric code for generation of finite-element model of nonwovens accounting for orientation distribution of fibres

     Article • International Journal for Numerical Methods in Engineering, March 2013, Wiley

     Professor Vadim V Silberschmidt

320. 
     Fracture process in cortical bone: X-FEM analysis of microstructured models

     Article • International Journal of Fracture, February 2013, Springer Science + Business Media

     Professor Vadim V Silberschmidt

321. 
     An advanced numerical tool to study fatigue crack propagation in aluminium plates repaired with a composite patch

     Article • Engineering Fracture Mechanics, February 2013, Elsevier

     Professor Vadim V Silberschmidt

322. 
     Article • Journal of Medical and Biological Engineering, January 2013, Taiwanese Society of Biomedical Engineering

     Professor Vadim V Silberschmidt

323. 
     Modeling of Micro-machining Single-crystal f.c.c. Metals

     Article • Procedia CIRP, January 2013, Elsevier

     Professor Vadim V Silberschmidt

324. 
     Finite Element Modelling of Conventional and Hybrid Oblique Turning Processes of Titanium Alloy

     Article • Procedia CIRP, January 2013, Elsevier

     Professor Vadim V Silberschmidt

325. 
     A Finite Element Model of Ultrasonically Assisted Drilling in Carbon/Epoxy Composites

     Article • Procedia CIRP, January 2013, Elsevier

     Professor Vadim V Silberschmidt

326. 
     Mechanics of Materials for Microelectronic Components and Packages

     Article • January 2013, Springer Science + Business Media

     Professor Vadim V Silberschmidt

327. 
     Plastic behaviour of microstructural constituents of cortical bone tissue: a nanoindentation study

     Article • International Journal of Experimental and Computational Biomechanics, January 2013, Inderscience Publishers

     Professor Vadim V Silberschmidt

328. 
     Meso-scale deformation and damage in thermally bonded nonwovens

     Article • Journal of Materials Science, November 2012, Springer Science + Business Media

     Dr farukh farukh FARUKG, Professor Vadim V Silberschmidt

329. 
     Numerical modelling of damage initiation in low-density thermally bonded nonwovens

     Article • Computational Materials Science, November 2012, Elsevier

     Dr farukh farukh FARUKG, Professor Vadim V Silberschmidt

330. 
     Response of semi-crystalline thermoplastic polymers to dynamic loading: A finite element study

     Article • Computational Materials Science, November 2012, Elsevier

     Professor Vadim V Silberschmidt, Dr Liviu Marsavina

331. 
     Finite element modelling of thermally bonded nonwovens: Effect of manufacturing parameters on tensile stiffness

     Article • Computational Materials Science, November 2012, Elsevier

     Professor Vadim V Silberschmidt

332. 
     Damage modelling in woven-fabric CFRP laminates under large-deflection bending

     Article • Computational Materials Science, November 2012, Elsevier

     Professor Vadim V Silberschmidt

333. 
     A risk based approach to asset integrity management

     Article • Journal of Quality in Maintenance Engineering, October 2012, Emerald

     Professor Vadim V Silberschmidt

334. 
     A novel concept to develop composite structures with isotropic negative Poisson’s ratio: Effects of random inclusions

     Article • Composites Science and Technology, October 2012, Elsevier

     Professor Vadim V Silberschmidt

335. 
     Advanced Fire Design of Timber Structures Using Computational Techniques - Simple Indeterminate Structures

     Article • Journal of Structural Fire Engineering, September 2012, Multi-Science Publishing Co. Ltd.

     Professor Vadim V Silberschmidt

336. 
     Strength of fibres in low-density thermally bonded nonwovens: An experimental investigation

     Article • Journal of Physics Conference Series, August 2012, Institute of Physics Publishing

     Dr farukh farukh FARUKG, Professor Vadim V Silberschmidt

337. 
     Variability and Anisotropy of Fracture Toughness of Cortical Bone Tissue

     Article • Journal of Physics Conference Series, August 2012, Institute of Physics Publishing

     Professor Vadim V Silberschmidt

338. 
     Ultrasonically assisted turning of Ti-6Al-2Sn-4Zr-6Mo

     Article • Journal of Physics Conference Series, August 2012, Institute of Physics Publishing

     Professor Vadim V Silberschmidt

339. 
     Numerical analysis and noise detection for design optimisation of an ultrasonic transducer

     Article • Journal of Physics Conference Series, August 2012, Institute of Physics Publishing

     Professor Vadim V Silberschmidt

340. 
     Finite element analysis of the high strain rate testing of polymeric materials

     Article • Journal of Physics Conference Series, August 2012, Institute of Physics Publishing

     Professor Vadim V Silberschmidt

341. 
     Finite element analysis of drilling in carbon fiber reinforced polymer composites

     Article • Journal of Physics Conference Series, August 2012, Institute of Physics Publishing

     Professor Vadim V Silberschmidt

342. 
     Damage in woven CFRP laminates subjected to low velocity impacts

     Article • Journal of Physics Conference Series, August 2012, Institute of Physics Publishing

     Professor Vadim V Silberschmidt

343. 
     Cutting forces in ultrasonically assisted drilling of carbon fibre-reinforced plastics

     Article • Journal of Physics Conference Series, August 2012, Institute of Physics Publishing

     Professor Vadim V Silberschmidt

344. 
     Application of Smooth-Particle Hydrodynamics in Metal Machining

     Article • Journal of Physics Conference Series, August 2012, Institute of Physics Publishing

     Professor Vadim V Silberschmidt

345. 
     Thermo-mechanical characteristics of indium micro-joint under various low-temperature excursions

     Article • August 2012, Institute of Electrical & Electronics Engineers (IEEE)

     Professor Vadim V Silberschmidt

346. 
     Thermo-mechanical behaviour analysis of micro-solder joints by finite element modelling

     Article • August 2012, Institute of Electrical & Electronics Engineers (IEEE)

     Professor Vadim V Silberschmidt

347. 
     Thermal fatigue life estimation and delamination mechanics studies of multilayered MEMS structures

     Article • Microelectronics Reliability, August 2012, Elsevier

     Professor Vadim V Silberschmidt

348. 
     On-line analysis of cracking in cortical bone under wedge penetration

     Article • Proceedings of the Institution of Mechanical Engineers Part H Journal of Engineering in Medicine, July 2012, SAGE Publications

     Professor Vadim V Silberschmidt

349. 
     Crack as modulator, detector and amplifier in structural health monitoring

     Article • Journal of Sound and Vibration, July 2012, Elsevier

     Professor Vadim V Silberschmidt

350. 
     Viscoelastic Properties of Semi-Crystalline Thermoplastic Polymers: Dynamic Analysis and Creep

     Article • Solid State Phenomena, May 2012, Trans Tech Publications

     Professor Vadim V Silberschmidt

351. 
     Ultrasonically Assisted Drilling of Carbon Fibre Reinforced Plastics

     Article • Solid State Phenomena, May 2012, Trans Tech Publications

     Professor Vadim V Silberschmidt

352. 
     Turning of Advanced Alloys with Vibrating Cutting Tool

     Article • Solid State Phenomena, May 2012, Trans Tech Publications

     Professor Vadim V Silberschmidt

353. 
     Numerical Modelling of Thermally Bonded Nonwovens: Continuous and Discontinuous Approaches

     Article • Solid State Phenomena, May 2012, Trans Tech Publications

     Professor Vadim V Silberschmidt

354. 
     Indentation in F.C.C. Single Crystals

     Article • Solid State Phenomena, May 2012, Trans Tech Publications

     Professor Vadim V Silberschmidt

355. 
     Finite-Element Analysis of Forces in Drilling of Ti-Alloys at Elevated Temperature

     Article • Solid State Phenomena, May 2012, Trans Tech Publications

     Professor Vadim V Silberschmidt

356. 
     Experimental and numerical analysis of Izod impact test of cortical bone tissue

     Article • The European Physical Journal Special Topics, May 2012, Springer Science + Business Media

     Professor Vadim V Silberschmidt

357. 
     Drilling-Induced Damage in CFRP Laminates: Experimental and Numerical Analysis

     Article • Solid State Phenomena, May 2012, Trans Tech Publications

     Professor Vadim V Silberschmidt

358. 
     Analysis of Machinability of Ti- and Ni-Based Alloys

     Article • Solid State Phenomena, May 2012, Trans Tech Publications

     Professor Vadim V Silberschmidt

359. 
     Analysis of Deformation Characteristics of Cortical Bone Tissue

     Article • Solid State Phenomena, May 2012, Trans Tech Publications

     Professor Vadim V Silberschmidt

360. 
     Preface

     Article • Computational Materials Science, February 2012, Elsevier

     Professor Vadim V Silberschmidt

361. 
     Numerical analysis of thermo-mechanical behavior of indium micro-joint at cryogenic temperatures

     Article • Computational Materials Science, February 2012, Elsevier

     Professor Vadim V Silberschmidt

362. 
     Modelling the effect of microstructural randomness on the mechanical response of composite laminates through the application of stochastic cohesive zone elements

     Article • Computational Materials Science, February 2012, Elsevier

     Professor Vadim V Silberschmidt

363. 
     Micro-scale modelling of bovine cortical bone fracture: Analysis of crack propagation and microstructure using X-FEM

     Article • Computational Materials Science, February 2012, Elsevier

     Professor Vadim V Silberschmidt

364. 
     Finite-element modelling of bending of CFRP laminates: Multiple delaminations

     Article • Computational Materials Science, February 2012, Elsevier

     Professor Vadim V Silberschmidt

365. 
     Computation of mechanical anisotropy in thermally bonded bicomponent fibre nonwovens

     Article • Computational Materials Science, February 2012, Elsevier

     Professor Vadim V Silberschmidt

366. 
     A parametric finite element analysis method for low-density thermally bonded nonwovens

     Article • Computational Materials Science, February 2012, Elsevier

     Professor Vadim V Silberschmidt

367. 
     Behaviour of semi-crystalline thermoplastic polymers: Experimental studies and simulations

     Article • Computational Materials Science, February 2012, Elsevier

     Dr Liviu Marsavina, Professor Vadim V Silberschmidt

368. 
     A study of computational mechanics of 3D spacer fabric: factors affecting its compression deformation

     Article • Journal of Materials Science, January 2012, Springer Science + Business Media

     Professor Vadim V Silberschmidt

369. 
     Experimental and Numerical Analysis of Damage in Woven GFRP Composites Under Large-deflection Bending

     Article • Applied Composite Materials, January 2012, Springer Science + Business Media

     Professor Vadim V Silberschmidt

370. 
     Vibro-impact response of the cracked structures to monitor structural health

     Article • MATEC Web of Conferences, January 2012, EDP Sciences

     Professor Vadim V Silberschmidt

371. 
     Numerical Modelling of Vibration-Assisted Turning of Ti-15333

     Article • Procedia CIRP, January 2012, Elsevier

     Professor Vadim V Silberschmidt

372. 
     Hot Ultrasonically Assisted Turning of β-Ti Alloy

     Article • Procedia CIRP, January 2012, Elsevier

     Professor Vadim V Silberschmidt

373. 
     Experimental and Numerical Investigations in Conventional and Ultrasonically Assisted Drilling of CFRP Laminate

     Article • Procedia CIRP, January 2012, Elsevier

     Professor Vadim V Silberschmidt

374. 
     Experimental and numerical analysis of stress wave propagation in polymers and the role of interfaces in armour systems

     Article • Open Engineering, January 2012, De Gruyter

     Professor Vadim V Silberschmidt

375. 
     Damage in woven CFRP laminates under impact loading

     Article • EPJ Web of Conferences, January 2012, EDP Sciences

     Professor Vadim V Silberschmidt

376. 
     Comparing Machinability of Ti-15-3-3-3 and Ni-625 Alloys in Uat

     Article • Procedia CIRP, January 2012, Elsevier

     Professor Vadim V Silberschmidt

377. 
     Experimental Investigation of the Mechanics of Conventional and Ultrasonically-Assisted Drilling of Cortical Bone

     Article • January 2012, ACTA Press

     Professor Vadim V Silberschmidt

378. 
     Thermal Fatigue Life Estimation and Fracture Mechanics Studies of Multilayered MEMS Structures Using a Sub-Domain Approach

     Article • World Journal of Mechanics, January 2012, Scientific Research Publishing, Inc,

     Professor Vadim V Silberschmidt

379. 
     Intermetallic phase transformations in Au–Al wire bonds

     Article • Intermetallics, December 2011, Elsevier

     Professor Vadim V Silberschmidt

380. 
     Full-scale natural fire tests on gypsum lined structural insulated panel (SIP) and engineered floor joist assemblies

     Article • Fire Safety Journal, November 2011, Elsevier

     Professor Vadim V Silberschmidt

381. 
     New mechanisms of void growth in Au–Al wire bonds: Volumetric shrinkage and intermetallic oxidation

     Article • Scripta Materialia, October 2011, Elsevier

     Professor Vadim V Silberschmidt

382. 
     Facilitating intermetallic formation in wire bonding by applying a pre-ultrasonic energy

     Article • Microelectronic Engineering, October 2011, Elsevier

     Professor Vadim V Silberschmidt

383. 
     On the modelling of dynamic structures with discontinuities

     Article • Nonlinear Dynamics, September 2011, Springer Science + Business Media

     Professor Vadim V Silberschmidt

384. 
     Dynamic Behavior of Advanced Ti Alloy under Impact Loading: Experimental and Numerical Analysis

     Article • Applied Mechanics and Materials, August 2011, Trans Tech Publications

     Professor Vadim V Silberschmidt

385. 
     Behavior of aluminum oxide, intermetallics and voids in Cu–Al wire bonds

     Article • Acta Materialia, August 2011, Elsevier

     Professor Vadim V Silberschmidt

386. 
     Analysis of the High Strain-Rate Behaviour of Polyethylene Based Nanocomposites

     Article • Applied Mechanics and Materials, August 2011, Trans Tech Publications

     Professor Vadim V Silberschmidt

387. 
     Analysis of Nonlinear Shear Deformations in CFRP and GFRP Textile Laminates

     Article • Applied Mechanics and Materials, August 2011, Trans Tech Publications

     Professor Vadim V Silberschmidt

388. 
     Analysis of Forces in Vibro-Impact and Hot Vibro-Impact Turning of Advanced Alloys

     Article • Applied Mechanics and Materials, August 2011, Trans Tech Publications

     Professor Vadim V Silberschmidt

389. 
     Analysis of Creep Behavior of Polypropylene Fibers

     Article • Applied Mechanics and Materials, August 2011, Trans Tech Publications

     Professor Vadim V Silberschmidt

390. 
     Dynamic Properties of Cortical Bone Tissue: Impact Tests and Numerical Study

     Article • Applied Mechanics and Materials, August 2011, Trans Tech Publications

     Professor Vadim V Silberschmidt

391. 
     Dynamic Response of Thermally Bonded Bicomponent Fibre Nonwovens

     Article • Applied Mechanics and Materials, August 2011, Trans Tech Publications

     Professor Vadim V Silberschmidt

392. 
     9th International Conference on Damage Assessment of Structures (DAMAS 2011)

     Article • Journal of Physics Conference Series, July 2011, Institute of Physics Publishing

     Professor Vadim V Silberschmidt

393. 
     Effect of fire-induced damage on the uniaxial strength characteristics of solid timber: A numerical study

     Article • Journal of Physics Conference Series, July 2011, Institute of Physics Publishing

     Professor Vadim V Silberschmidt

394. 
     Damage assessment in multilayered MEMS structures under thermal fatigue

     Article • Journal of Physics Conference Series, July 2011, Institute of Physics Publishing

     Professor Vadim V Silberschmidt

395. 
     Damage assessment in CFRP laminates exposed to impact fatigue loading

     Article • Journal of Physics Conference Series, July 2011, Institute of Physics Publishing

     Professor Vadim V Silberschmidt

396. 
     Analysis of nonlinear deformations and damage in CFRP textile laminates

     Article • Journal of Physics Conference Series, July 2011, Institute of Physics Publishing

     Professor Vadim V Silberschmidt

397. 
     Analysis of anisotropic viscoelastoplastic properties of cortical bone tissues

     Article • Journal of the Mechanical Behavior of Biomedical Materials, July 2011, Elsevier

     Professor Vadim V Silberschmidt

398. 
     A numerical study of gypsum plasterboard behaviour under standard and natural fire conditions

     Article • Fire and Materials, May 2011, Wiley

     Professor Vadim V Silberschmidt

399. 
     Void growth in thermosonic copper/gold wire bonding on aluminum pads

     Article • May 2011, Institute of Electrical & Electronics Engineers (IEEE)

     Professor Vadim V Silberschmidt

400. 
     Editorial

     Article • Journal of Sound and Vibration, May 2011, Elsevier

     Professor Vadim V Silberschmidt

401. 
     An effective thermal property framework for softwood in parametric design fires: Comparison of the Eurocode 5 parametric charring approach and advanced calculation models

     Article • Construction and Building Materials, May 2011, Elsevier

     Professor Vadim V Silberschmidt

402. 
     Finite-Element Simulations of Split Hopkinson Test of Ti-Based Alloy

     Article • Advanced Materials Research, April 2011, Trans Tech Publications

     Professor Vadim V Silberschmidt

403. 
     Effect of Cutting Conditions on Temperature Generated in Drilling Process: a FEA Approach

     Article • Advanced Materials Research, April 2011, Trans Tech Publications

     Professor Vadim V Silberschmidt

404. 
     Computational Study of Ultrasonically-Assisted Turning of Ti Alloys

     Article • Advanced Materials Research, April 2011, Trans Tech Publications

     Professor Vadim V Silberschmidt

405. 
     Analysis of Forces and Temperatures in Conventional and Ultrasonically-Assisted Cutting of Bone

     Article • Advanced Materials Research, April 2011, Trans Tech Publications

     Professor Vadim V Silberschmidt

406. 
     Effect of ultrasonic energy on nanoscale interfacial structure in copper wire bonding on aluminium pads

     Article • Journal of Physics D Applied Physics, March 2011, Institute of Physics Publishing

     Professor Vadim V Silberschmidt

407. 
     Experimental investigations of forces and torque in conventional and ultrasonically-assisted drilling of cortical bone

     Article • Medical Engineering & Physics, March 2011, Elsevier

     Professor Vadim V Silberschmidt

408. 
     Finite element simulation of low-density thermally bonded nonwoven materials: Effects of orientation distribution function and arrangement of bond points

     Article • Computational Materials Science, February 2011, Elsevier

     Professor Vadim V Silberschmidt

409. 
     Finite element modelling of thermally bonded bicomponent fibre nonwovens: Tensile behaviour

     Article • Computational Materials Science, February 2011, Elsevier

     Professor Vadim V Silberschmidt

410. 
     Experimental Investigation of the Mechanics of Conventional and Ultrasonically-Assisted Drilling of Cortical Bone

     Article • January 2011, ACTA Press

     Professor Vadim V Silberschmidt

411. 
     Effect of bonding duration and substrate temperature in copper ball bonding on aluminium pads: A TEM study of interfacial evolution

     Article • Microelectronics Reliability, January 2011, Elsevier

     Professor Vadim V Silberschmidt

412. 
     Crack Propagation in a Toughened Epoxy Adhesive under Repeated Impacts

     Article • Shock and Vibration, January 2011, Hindawi Publishing Corporation

     Professor Vadim V Silberschmidt

413. 
     Energy-Based Analysis of Ultrasonically Assisted Turning

     Article • Shock and Vibration, January 2011, Hindawi Publishing Corporation

     Professor Vadim V Silberschmidt

414. 
     Vibro-Impact Response of a Cracked Bar

     Article • Shock and Vibration, January 2011, Hindawi Publishing Corporation

     Professor Vadim V Silberschmidt

415. 
     A micromechanism study of thermosonic gold wire bonding on aluminum pad

     Article • Journal of Applied Physics, December 2010, American Institute of Physics

     Professor Vadim V Silberschmidt

416. 
     Fatigue Crack Growth in Adhesively Bonded Joints with Intermittent Impacts

     Article • Key Engineering Materials, November 2010, Trans Tech Publications

     Professor Vadim V Silberschmidt

417. 
     Ti particle-reinforced surface layers in Al: Effect of particle size on microstructure, hardness and wear

     Article • Materials Characterization, November 2010, Elsevier

     Professor Vadim V Silberschmidt

418. 
     Interaction of Matrix Cracking and Delamination in Cross-ply Laminates: Simulations with Stochastic Cohesive Zone Elements

     Article • Applied Composite Materials, August 2010, Springer Science + Business Media

     Professor Vadim V Silberschmidt

419. 
     Non-uniformity of deformation in low-density thermally point bonded non-woven material: effect of microstructure

     Article • Journal of Materials Science, August 2010, Springer Science + Business Media

     Professor Vadim V Silberschmidt

420. 
     Introduction to Micromechanics and Nanomechanics

     Article • Assembly Automation, August 2010, Emerald

     Professor Vadim V Silberschmidt

421. 
     A Model to Predict the Anomalous Fatigue Crack Growth Behaviour Seen in Mixed Mechanism Fracture

     Article • The Journal of Adhesion, June 2010, Taylor & Francis

     Professor Vadim V Silberschmidt

422. 
     Repetitive indentation of Ti-based alloys: A numerical study

     Article • IOP Conference Series Materials Science and Engineering, June 2010, Institute of Physics Publishing

     Professor Vadim V Silberschmidt

423. 
     Interfacial failure under thermal fatigue loading in multilayered MEMS structures

     Article • IOP Conference Series Materials Science and Engineering, June 2010, Institute of Physics Publishing

     Professor Vadim V Silberschmidt

424. 
     Initial bond formation in thermosonic gold ball bonding on aluminium metallization pads

     Article • Journal of Materials Processing Technology, June 2010, Elsevier

     Professor Vadim V Silberschmidt

425. 
     Large scale natural fire tests on protected engineered timber floor systems

     Article • Fire Safety Journal, April 2010, Elsevier

     Professor Vadim V Silberschmidt

426. 
     Formation of Ag3Sn plates in SnAgCu solder bumps

     Article • Materials Science and Engineering A, April 2010, Elsevier

     Professor Vadim V Silberschmidt

427. 
     Energy aspects of ultrasonic intensification of treatment of metals

     Article • Doklady Physics, April 2010, Pleiades Publishing Ltd

     Professor Vadim V Silberschmidt

428. 
     The role of bonding duration in wire bond formation: a study of footprints of thermosonic gold wire on aluminium pad

     Article • Microelectronics International, January 2010, Emerald

     Professor Vadim V Silberschmidt

429. 
     Micro-Scale Numerical Model of Bovine Cortical Bone: Analysis of Plasticity Localization

     Article • January 2010, ASME International

     Professor Vadim V Silberschmidt

430. 
     Effect of ultrasonic energy on interfacial structure and bond strength in copper wire bonding

     Article • January 2010, Institute of Electrical & Electronics Engineers (IEEE)

     Professor Vadim V Silberschmidt

431. 
     Anisotropic Elastic-Plastic Mechanical Properties of Thermally Bonded Bicomponent Fibre Nonwovens

     Article • January 2010, ASME International

     Professor Vadim V Silberschmidt

432. 
     A 3D Numerical Study to Investigate the Effects of Temperature Variation and Residual Stresses in Representative Volume MEMS Elements

     Article • January 2010, ASME International

     Professor Vadim V Silberschmidt

433. 
     Computational and Experimental Mechanics of Advanced Materials

     Article • January 2010, Springer Science + Business Media

     Professor Vadim V Silberschmidt

434. 
     Effect of Microstructure: Multi-scale Modelling

     Article • January 2010, Springer Science + Business Media

     Professor Vadim V Silberschmidt

435. 
     Experimental Analysis of Mechanical Behaviour of Advanced Materials

     Article • January 2010, Springer Science + Business Media

     Professor Vadim V Silberschmidt

436. 
     Thermal analysis of orthogonal cutting of cortical bone using finite element simulations

     Article • International Journal of Experimental and Computational Biomechanics, January 2010, Inderscience Publishers

     Professor Vadim V Silberschmidt

437. 
     TEM interfacial characteristics of thermosonic gold wire bonding on aluminium metallization

     Article • December 2009, Institute of Electrical & Electronics Engineers (IEEE)

     Professor Vadim V Silberschmidt

438. 
     Intermetallics formation and evolution in pure indium joint for cryogenic application

     Article • December 2009, Institute of Electrical & Electronics Engineers (IEEE)

     Professor Vadim V Silberschmidt

439. 
     Amorphous metallic thin films as copper diffusion barrier for advanced interconnect applications

     Article • December 2009, Institute of Electrical & Electronics Engineers (IEEE)

     Professor Vadim V Silberschmidt

440. 
     Vibration characteristics of MR cantilever sandwich beams: experimental study

     Article • Smart Materials and Structures, November 2009, Institute of Physics Publishing

     Professor Vadim V Silberschmidt

441. 
     Modelling the Effect of Microstructural Randomness on the Fracture of Composite Laminates with Stochastic Cohesive Zone Elements

     Article • Key Engineering Materials, October 2009, Trans Tech Publications

     Professor Vadim V Silberschmidt

442. 
     Formation of Sn dendrites and SnAg eutectics in a SnAgCu solder

     Article • Scripta Materialia, October 2009, Elsevier

     Professor Vadim V Silberschmidt

443. 
     Growth of Intermetallic Compounds in Thermosonic Copper Wire Bonding on Aluminum Metallization

     Article • Journal of Electronic Materials, September 2009, Springer Science + Business Media

     Professor Vadim V Silberschmidt

444. 
     Simulations of delamination in CFRP laminates: Effect of microstructural randomness

     Article • Computational Materials Science, September 2009, Elsevier

     Professor Vadim V Silberschmidt

445. 
     Finite element analysis of forces of plane cutting of cortical bone

     Article • Computational Materials Science, September 2009, Elsevier

     Professor Vadim V Silberschmidt

446. 
     2D finite element analysis of thermally bonded nonwoven materials: Continuous and discontinuous models

     Article • Computational Materials Science, September 2009, Elsevier

     Professor Vadim V Silberschmidt

447. 
     Stresses in ultrasonically assisted bone cutting

     Article • Journal of Physics Conference Series, August 2009, Institute of Physics Publishing

     Professor Vadim V Silberschmidt

448. 
     Numerical analysis of response of indium micro-joint to low-temperature cycling

     Article • August 2009, Institute of Electrical & Electronics Engineers (IEEE)

     Professor Vadim V Silberschmidt

449. 
     Minimization of fracture-pulse energy under contact interaction

     Article • Doklady Physics, July 2009, Pleiades Publishing Ltd

     Professor Vadim V Silberschmidt

450. 
     A re-examination of the mechanism of thermosonic copper ball bonding on aluminium metallization pads

     Article • Scripta Materialia, July 2009, Elsevier

     Professor Vadim V Silberschmidt

451. 
     Measurements of Surface Roughness in Conventional and Ultrasonically Assisted Bone Drilling

     Article • American Journal of Biomedical Sciences, July 2009, New World Publishing International, Inc.

     Professor Vadim V Silberschmidt

452. 
     Heterogeneous Intragranular Inelastic Behavior of a Sn-Ag-Cu Alloy

     Article • Journal of Electronic Materials, June 2009, Springer Science + Business Media

     Professor Vadim V Silberschmidt

453. 
     Development of Delamination in Cross-Ply Laminates: Effect of Microstructure

     Article • Key Engineering Materials, June 2009, Trans Tech Publications

     Professor Vadim V Silberschmidt

454. 
     Damage Assessment of a Cracked Bar: Effect of Material Nonlinearity on Vibro-Impact Response

     Article • Key Engineering Materials, June 2009, Trans Tech Publications

     Professor Vadim V Silberschmidt

455. 
     Mechanical response of indium micro-joints to low temperature cycling

     Article • May 2009, Institute of Electrical & Electronics Engineers (IEEE)

     Professor Vadim V Silberschmidt

456. 
     Creep damage study at powercycling of lead-free surface mount device

     Article • Computational Materials Science, May 2009, Elsevier

     Professor Vadim V Silberschmidt

457. 
     Initial formation of CuSn intermetallic compounds between molten SnAgCu solder and Cu substrate

     Article • Scripta Materialia, March 2009, Elsevier

     Professor Vadim V Silberschmidt

458. 
     Temperature Calculations in Orthogonal Cutting of Cortical Bone Using Finite Element Analysis

     Article • January 2009, Springer Science + Business Media

     Professor Vadim V Silberschmidt

459. 
     Enhanced finite element model of ultrasonically assisted turning

     Article • International Journal of Machining and Machinability of Materials, January 2009, Inderscience Publishers

     Professor Vadim V Silberschmidt

460. 
     Analysis of Damage Propagation in Single Lap Joints in Impact Fatigue

     Article • January 2009, Springer Science + Business Media

     Professor Vadim V Silberschmidt

461. 
     Impact Fatigue of Adhesive Joints

     Article • Key Engineering Materials, January 2009, Trans Tech Publications

     Professor Vadim V Silberschmidt

462. 
     TEM Microstructural Analysis of As-bonded Copper Ball Bonds on Aluminum Metallization

     Article • December 2008, Institute of Electrical & Electronics Engineers (IEEE)

     Professor Vadim V Silberschmidt

463. 
     Impact fatigue in adhesive joints

     Article • Proceedings of the Institution of Mechanical Engineers Part C Journal of Mechanical Engineering Science, October 2008, SAGE Publications

     Professor Vadim V Silberschmidt

464. 
     Damage in adhesively bonded CFRP joints: Sinusoidal and impact-fatigue

     Article • Composites Science and Technology, October 2008, Elsevier

     Professor Vadim V Silberschmidt

465. 
     3D Study of Thermal Stresses in Lead-Free Surface Mount Devices

     Article • Journal of Thermal Stresses, September 2008, Taylor & Francis

     Professor Vadim V Silberschmidt

466. 
     Thermo-mechanical damage accumulation during power cycling of lead-free surface mount solder joints

     Article • September 2008, Institute of Electrical & Electronics Engineers (IEEE)

     Professor Vadim V Silberschmidt

467. 
     Evolution of CuSn intermetallics between molten SnAgCu solder and Cu substrate

     Article • Acta Materialia, September 2008, Elsevier

     Professor Vadim V Silberschmidt

468. 
     Effect of thermal aging on interfacial behaviour of copper ball bonds

     Article • September 2008, Institute of Electrical & Electronics Engineers (IEEE)

     Professor Vadim V Silberschmidt

469. 
     Delamination in adhesively bonded CFRP joints: Standard fatigue, impact-fatigue and intermittent impact

     Article • Composites Science and Technology, September 2008, Elsevier

     Professor Vadim V Silberschmidt

470. 
     Effect of multi-impacts on a PMMA sheet material

     Article • Journal of Materials Processing Technology, August 2008, Elsevier

     Professor Vadim V Silberschmidt

471. 
     Mixed-mode crack growth in bonded composite joints under standard and impact-fatigue loading

     Article • Journal of Materials Science, July 2008, Springer Science + Business Media

     Professor Vadim V Silberschmidt

472. 
     Numerical modelling of low-density cellular materials

     Article • Computational Materials Science, July 2008, Elsevier

     Professor Vadim V Silberschmidt

473. 
     Mesomechanical modelling of SnAgCu solder joints in flip chip

     Article • Computational Materials Science, July 2008, Elsevier

     Professor Vadim V Silberschmidt

474. 
     Finite element analysis of lead-free surface mount devices

     Article • Computational Materials Science, July 2008, Elsevier

     Professor Vadim V Silberschmidt

475. 
     Characterization of ultrasonically peened and laser-shock peened surface layers of AISI 321 stainless steel

     Article • Surface and Coatings Technology, June 2008, Elsevier

     Professor Vadim V Silberschmidt

476. 
     Effects of process parameters on bondability in thermosonic copper ball bonding

     Article • May 2008, Institute of Electrical & Electronics Engineers (IEEE)

     Professor Vadim V Silberschmidt

477. 
     Viscoelasticity of multi-layer textile reinforced polymer composites used in soccer balls

     Article • Journal of Materials Science, February 2008, Springer Science + Business Media

     Professor Vadim V Silberschmidt

478. 
     A Risk Based Methodology for Spare Parts Inventory Optimisation

     Article • January 2008, ASME International

     Professor Vadim V Silberschmidt

479. 
     Article • Journal of Sound and Vibration, December 2007, Elsevier

     Professor Vadim V Silberschmidt

480. 
     Damage evolution in adhesive joints subjected to impact fatigue

     Article • Journal of Sound and Vibration, December 2007, Elsevier

     Professor Vadim V Silberschmidt

481. 
     Analysis of forces in ultrasonically assisted turning

     Article • Journal of Sound and Vibration, December 2007, Elsevier

     Professor Vadim V Silberschmidt

482. 
     Effect of Impact-Fatigue on Damage in Adhesive Joints

     Article • September 2007, CrossRef Test Account

     Professor Vadim V Silberschmidt

483. 
     Micromechanical modelling of SnAgCu solder joint under cyclic loading: Effect of grain orientation

     Article • Computational Materials Science, March 2007, Elsevier

     Professor Vadim V Silberschmidt

484. 
     3D finite element analysis of ultrasonically assisted turning

     Article • Computational Materials Science, March 2007, Elsevier

     Professor Vadim V Silberschmidt

485. 
     Crystallographic Structure and Mechanical Behaviour of SnAgCu Solder Interconnects under a Constant Loading Rate

     Article • January 2007, Institute of Electrical & Electronics Engineers (IEEE)

     Professor Vadim V Silberschmidt

486. 
     Creep Analysis of a Lead-free Surface Mount Device

     Article • January 2007, Institute of Electrical & Electronics Engineers (IEEE)

     Professor Vadim V Silberschmidt

487. 
     Effect of Impact-Fatigue on Damage in Adhesive Joints

     Article • Key Engineering Materials, January 2007, Trans Tech Publications

     Professor Vadim V Silberschmidt

488. 
     Mechanical Behaviour of Grains in SnAgCu Solder Joints

     Article • December 2006, Institute of Electrical & Electronics Engineers (IEEE)

     Professor Vadim V Silberschmidt

489. 
     Analysis of Stress Distribution in SnAgCu Solder Joint

     Article • October 2006, CrossRef Test Account

     Professor Vadim V Silberschmidt

490. 
     Stresses in Ultrasonically Assisted Turning

     Article • October 2006, CrossRef Test Account

     Professor Vadim V Silberschmidt

491. 
     Effect of micro-randomness on macroscopic properties and fracture of laminates

     Article • Journal of Materials Science, August 2006, Springer Science + Business Media

     Professor Vadim V Silberschmidt

492. 
     Modelling of Ag3Sn coarsening and its effect on creep of Sn–Ag eutectics

     Article • Materials Science and Engineering A, July 2006, Elsevier

     Professor Vadim V Silberschmidt

493. 
     Effect of material’s randomness on scaling of crack propagation in ceramics

     Article • International Journal of Fracture, July 2006, Springer Science + Business Media

     Professor Vadim V Silberschmidt

494. 
     Analysis of damage evolution in thick ceramic coatings

     Article • Materials Science and Engineering A, June 2006, Elsevier

     Professor Vadim V Silberschmidt

495. 
     Analysis of material response to ultrasonic vibration loading in turning Inconel 718

     Article • Materials Science and Engineering A, May 2006, Elsevier

     Professor Vadim V Silberschmidt

496. 
     Book Review: Jacques Lévy-Véhel, Evelyne Lutton (Eds.) Fractals in Engineering. New Trends in Theory and Applications

     Article • ZAMM ‐ Journal of Applied Mathematics and Mechanics / Zeitschrift für Angewandte Mathematik und Mechanik, April 2006, Wiley

     Professor Vadim V Silberschmidt

497. 
     Micromechanical analysis of effective properties of plasma sprayed alumina coatings

     Article • Materials Science and Engineering A, February 2006, Elsevier

     Professor Vadim V Silberschmidt

498. 
     Stresses in Ultrasonically Assisted Turning

     Article • Applied Mechanics and Materials, January 2006, Trans Tech Publications

     Professor Vadim V Silberschmidt

499. 
     Multi- scale modelling of cracking in cross- ply laminates

     Article • September 2005, Taylor & Francis

     Professor Vadim V Silberschmidt

500. 
     Semi-analytical analysis of thermally induced damage in thin ceramic coatings

     Article • International Journal of Solids and Structures, August 2005, Elsevier

     Professor Vadim V Silberschmidt

501. 
     Effect of lubrication and cutting parameters on ultrasonically assisted turning of Inconel 718

     Article • Journal of Materials Processing Technology, May 2005, Elsevier

     Professor Vadim V Silberschmidt

502. 
     Thermomechanical finite element simulations of ultrasonically assisted turning

     Article • Computational Materials Science, March 2005, Elsevier

     Professor Vadim V Silberschmidt

503. 
     Microstructure-based damage and fracture modelling of alumina coatings

     Article • Computational Materials Science, March 2005, Elsevier

     Professor Vadim V Silberschmidt

504. 
     Matrix cracking in cross-ply laminates: effect of randomness

     Article • Composites Part A Applied Science and Manufacturing, February 2005, Elsevier

     Professor Vadim V Silberschmidt

505. 
     10.4028/0-87849-351-4.71

     Article • January 2005, CrossRef Test Account

     Professor Vadim V Silberschmidt

506. 
     Multi-scale modelling of cracking in cross-ply laminates

     Article • January 2005, Elsevier

     Professor Vadim V Silberschmidt

507. 
     Finite element analysis of ultrasonically assisted turning of Inconel 718

     Article • Journal of Materials Processing Technology, November 2004, Elsevier

     Professor Vadim V Silberschmidt

508. 
     Ultrasonically assisted turning of aviation materials: simulations and experimental study

     Article • Ultrasonics, April 2004, Elsevier

     Professor Vadim V Silberschmidt

509. 
     Finite element simulations of ultrasonically assisted turning

     Article • Computational Materials Science, November 2003, Elsevier

     Professor Vadim V Silberschmidt

510. 
     Thermal Loading of Duplex Steels

     Article • Journal of Engineering Materials and Technology, January 2003, ASME International

     Professor Vadim V Silberschmidt

511. 
     Crack propagation in random materials: computational analysis

     Article • Computational Materials Science, January 2003, Elsevier

     Professor Vadim V Silberschmidt

512. 
     Computational and Experimental Mechanics of Advanced Materials

     Article • Journal of Engineering Materials and Technology, January 2003, ASME International

     Professor Vadim V Silberschmidt

513. 
     Computational analysis of thermally loaded duplex stainless steels: the role of the free surfaces and the microstructure

     Article • Computational Materials Science, December 2000, Elsevier

     Professor Vadim V Silberschmidt

514. 
     Dynamics and Scaling Characteristics of Shear Crack Propagation

     Article • Pure and Applied Geophysics, April 2000, Springer Science + Business Media

     Professor Vadim V Silberschmidt

515. 
     Enhanced fracture energy and effects of temperature at spalling in ceramics: continuum damage modelling

     Article • Archive of Applied Mechanics, February 2000, Springer Science + Business Media

     Professor Vadim V Silberschmidt

516. 
     Analysis of Cracking in Rock Salt

     Article • Rock Mechanics and Rock Engineering, February 2000, Springer Science + Business Media

     Professor Vadim V Silberschmidt

517. 
     Dynamics and Scaling Characteristics of Shear Crack Propagation

     Article • January 2000, Springer Science + Business Media

     Professor Vadim V Silberschmidt

518. 
     Analysis of thermal residual stresses in duplex-type materials

     Article • Computational Materials Science, December 1999, Elsevier

     Professor Vadim V Silberschmidt

519. 
     On material immanent ratchetting of two-phase materials under cyclic purely thermal loading

     Article • Archive of Applied Mechanics, November 1999, Springer Science + Business Media

     Professor Vadim V Silberschmidt

520. 
     Multifractal characteristics of matrix cracking in laminates under T-fatigue

     Article • Computational Materials Science, December 1998, Elsevier

     Professor Vadim V Silberschmidt

521. 
     Computational modelling of the size effect of damage inhomogeneity in ceramics

     Article • Computational Materials Science, December 1998, Elsevier

     Professor Vadim V Silberschmidt

522. 
     Evolution of a laser-generated shock wave in iron and its interaction with martensitic transformation and twinning

     Article • Shock Waves, June 1998, Springer Science + Business Media

     Professor Vadim V Silberschmidt

523. 
     Analysis of Shear Damage Evolution

     Article • International Journal of Damage Mechanics, April 1998, SAGE Publications

     Professor Vadim V Silberschmidt

524. 
     Dynamics of Stochastic Damage Evolution

     Article • International Journal of Damage Mechanics, January 1998, SAGE Publications

     Professor Vadim V Silberschmidt

525. 
     Fractal and Multifractal Characteristics of Propagating Cracks

     Article • Journal de Physique IV (Proceedings), October 1996, EDP Sciences

     Professor Vadim V Silberschmidt

526. 
     Fractal approach in modelling of earthquakes

     Article • Geologische Rundschau, March 1996, Springer Science + Business Media

     Professor Vadim V Silberschmidt

527. 
     Stochastic dynamics of damage evolution in brittle rocks

     Article • Geologische Rundschau, March 1996, Springer Science + Business Media

     Professor Vadim V Silberschmidt

528. 
     Fractal approach in modelling of earthquakes

     Article • International Journal of Earth Sciences, January 1996, Springer Science + Business Media

     Professor Vadim V Silberschmidt

529. 
     Stochastic dynamics of damage evolution in brittle rocks

     Article • International Journal of Earth Sciences, January 1996, Springer Science + Business Media

     Professor Vadim V Silberschmidt

530. 
     SCALING AND MULTIFRACTAL CHARACTER OF MATRIX CRACKING IN CARBON FIBRE-REINFORCED CROSS-PLY LAMINATES

     Article • Mechanics of Composite Materials and Structures, September 1995, Taylor & Francis

     Professor Vadim V Silberschmidt

531. 
     The effect of material stochasticity on crack-damage interaction and crack propagation

     Article • Engineering Fracture Mechanics, June 1994, Elsevier

     Professor Vadim V Silberschmidt

532. 
     Effect of Stochasticity on the Damage Accumulation in Solids

     Article • International Journal of Damage Mechanics, January 1994, SAGE Publications

     Professor Vadim V Silberschmidt

533. 
     Fractal Characteristics of Joint Development in Stochastic Rocks

     Article • January 1994, Springer Science + Business Media

     Professor Vadim V Silberschmidt

534. 
     Multi—Scale Model of Damage Evolution in Stochastic Rocks: Fractal Approach

     Article • January 1994, Springer Science + Business Media

     Professor Vadim V Silberschmidt

535. 
     On the Multifractal Character of Load Distribution Near the Cracks

     Article • EPL (Europhysics Letters), September 1993, Institute of Physics Publishing

     Professor Vadim V Silberschmidt

536. 
     Effect of stochasticity on scaling properties of crack propagation

     Article • International Journal of Fracture, May 1993, Springer Science + Business Media

     Professor Vadim V Silberschmidt

537. 
     The fractal characterization of propagating cracks

     Article • International Journal of Fracture, August 1992, Springer Science + Business Media

     Professor Vadim V Silberschmidt

538. 
     On statistical thermodynamics of deformation twinning

     Article • Continuum Mechanics and Thermodynamics, January 1992, Springer Science + Business Media

     Professor Vadim V Silberschmidt

539. 
     Kinetics and topological aspects of the quasibrittle failure of carbon-bearing composites

     Article • Mechanics of Composite Materials, January 1991, Springer Science + Business Media

     Professor Vadim V Silberschmidt

540. 
     Fractal models in rock fracture analysis

     Article • Terra Nova, September 1990, Wiley

     Professor Vadim V Silberschmidt

541. 
     The Fracture of Solids with Microcracks: Experiments, Statistical Thermodynamics and Constitutive Equations

     Article • January 1989, Elsevier

     Professor Vadim V Silberschmidt

542. 
     Account for Random Microstructure in Multiscale Models

     Article • Springer Science + Business Media

     Professor Vadim V Silberschmidt

543. 
     Grain Features of SnAgCu Solder and their Effect on Mechanical Behavior of Micro-Joints

     Article • Institute of Electrical & Electronics Engineers (IEEE)

     Professor Vadim V Silberschmidt

544. 
     Computational modeling of ultrasonically assisted turning

     Article • Springer Science + Business Media

     Professor Vadim V Silberschmidt