All Stories

  1. Assessment of a Thermally Modified Cellulose Acetate Forward-Osmosis Membrane Using Response Surface Methodology
  2. Optimal conditions of porous ceramic membrane synthesis based on alkali activated blast furnace slag using Taguchi method
  3. Application of polyhedral oligomeric silsesquioxane to the stabilization and performance enhancement of poly(4-methyl-2-pentyne) nanocomposite membranes for natural gas conditioning
  4. P84/ZIF-8 mixed matrix membranes for pervaporation dehydration of isopropanol
  5. Fouling behavior investigation of a thermally modified RO membrane
  6. Modified poly(vinyl alcohol)/chitosan blended membranes for isopropanol dehydration via pervaporation: Synthesis optimization and modeling by response surface methodology
  7. Ceramic membrane synthesis based on alkali activated blast furnace slag for separation of water from ethanol
  8. Pebax membrane for CO2 /CH4 separation: Effects of various solvents on morphology and performance
  9. Effects of Synthesis Parameters on the Characteristics of Naa Type Zeolite Nanoparticles
  10. Analysis of heat and mass transfer in vacuum membrane distillation for water desalination using computational fluid dynamics (CFD)
  11. Synthetic PDMS composite membranes for pervaporation dehydration of ethanol
  12. Analysis of BSA, dextran and humic acid fouling during microfiltration, experimental and modeling
  13. An investigation on manufacturing of alumina microfiltration membranes
  14. Simulation of momentum, heat and mass transfer in direct contact membrane distillation: A computational fluid dynamics approach
  15. Synergistic interactions between POSS and fumed silica and their effect on the properties of crosslinked PDMS nanocomposite membranes
  16. Assessment of Urtica as a low-cost adsorbent for methylene blue removal: kinetic, equilibrium, and thermodynamic studies
  17. Adsorption of Zinc and Lead Ions from Aqueous Solutions Using Chitosan/Polyvinyl Alcohol Membrane Incorporated via Acid-Functionalized Carbon Nanotubes
  18. Performance of PVA/NaA Mixed Matrix Membrane for Removal of Water from Ethylene Glycol Solutions by Pervaporation
  19. Prediction of CO2/CH4 permeability through Sigma-1–Matrimid®5218 MMMs using the Maxwell model
  20. Synthesis and characterization of ultrafine sub-micron Na-LTA zeolite particles prepared via hydrothermal template-free method
  21. Novel Poly(vinyl alcohol)/Multiwalled Carbon Nanotube Nanocomposite Membranes for Pervaporation Dehydration of Isopropanol: Poly(sodium 4-styrenesulfonate) as a Functionalization Agent
  22. PHENOLIC WASTEWATER TREATMENT BY SUPPORTED LIQUID MEMBRANE USING DIFFERENT COOKING OILS AS LIQUID MEMBRANE
  23. Hydrothermal synthesis of hydroxy sodalite zeolite membrane: Separation of H2/CH4
  24. Preparation of alloyed poly(ether block amide)/poly(ethylene glycol diacrylate) membranes for separation of CO2/H2 (syngas application)
  25. Adsorption Behavior of Cu(II) Ions on Crosslinked Chitosan/Polyvinyl Alcohol Ion Imprinted Membrane
  26. Evaluation of pervaporation condition and synthesis gels for NaA zeolite membranes
  27. Bio-film and bio-entrapped hybrid membrane bioreactors in wastewater treatment: Comparison of membrane fouling and removal efficiency
  28. Methylene blue adsorption onto granular activated carbon prepared from Harmal seeds residue
  29. Defect formation and prevention during the preparation of supported carbon membranes
  30. Taguchi optimization approach for phenolic wastewater treatment by vacuum membrane distillation
  31. Stability and extraction study of phenolic wastewater treatment by supported liquid membrane using tributyl phosphate and sesame oil as liquid membrane
  32. Potential Separation of SF 6 from Air Using Chabazite Zeolite Membranes
  33. Cu(II) removal enhancement from aqueous solutions using ion-imprinted membrane technique
  34. Diffusive transport of Cu(II) ions through thin ion imprinted polymeric membranes
  35. Sol–gel synthesis of nanostructured titania–silica mesoporous membranes with photo-degradation and physical separation capacities for water purification
  36. Separation of Cd(II) and Ni(II) ions by supported liquid membrane using D2EHPA/M2EHPA as mobile carrier
  37. Hydrothermal Synthesis of Nanosized Zeolite T Crystals
  38. Tubular composite PVA ceramic supported membrane for bio-ethanol production
  39. Dehydration of ethylene glycol by pervaporation using gamma alumina/NaA zeolite composite membrane
  40. Effects of poly (allylamine hydrochloride) as a new functionalization agent for preparation of poly vinyl alcohol/multiwalled carbon nanotubes membranes
  41. Gas sorption in H2-selective mixed matrix membranes: Experimental and neural network modeling
  42. Defect formation and prevention during the preparation of supported carbon membranes
  43. Nano-porous membrane process for oily wastewater treatment: Optimization using response surface methodology
  44. Optimization of synthesis conditions for preparation of ceramic (A-type zeolite) membranes in dehydration of ethylene glycol
  45. Template free crystallization of zeolite Rho via Hydrothermal synthesis: Effects of synthesis time, synthesis temperature, water content and alkalinity
  46. Preparation and characterization of SAPO-34 – Matrimid® 5218 mixed matrix membranes for CO2/CH4 separation
  47. Gas separation performance of carbon materials produced from phenolic resin: Effects of carbonization temperature and ozone post treatment
  48. Mathematical modeling of mass transfer in multicomponent gas mixture across the synthesized composite polymeric membrane
  49. Investigation of H2S separation from H2S/CH4 mixtures using functionalized and non-functionalized vertically aligned carbon nanotube membranes
  50. Ternary gas permeation through synthesized pdms membranes: Experimental and CFD simulation basedon sorption-dependent system using neural network model
  51. Investigations on hydrothermal synthesis parameters in preparation of nanoparticles of LTA zeolite with the aid of TMAOH
  52. Integrated membrane pilot plant for refinery wastewater treatment in order to produce boiler feedwater
  53. Fabrication and characterization of highly crystalline mordenite membranes on α-alumina disks via a seeded in situ template-free hydrothermal treatment
  54. Gas separation performance of carbon materials produced from phenolic resin: Effects of carbonization temperature and ozone post treatment
  55. Gas permeation through H2-selective mixed matrix membranes: Experimental and neural network modeling
  56. Modification of ideal MMMs permeation prediction models: Effects of partial pore blockage and polymer chain rigidification
  57. Pertraction of methylene blue using a mixture of D2EHPA/M2EHPA and sesame oil as a liquid membrane
  58. Pertraction of cadmium and zinc ions using a supported liquid membrane impregnated with different carriers
  59. Effects of CNTs Content on Physicochemical and Pervaporation Separation Properties of PVA Membranes
  60. Synthesis of Nanostructured Anatase Mesoporous Membranes with Photocatalytic and Separation Capabilities for Water Ultrafiltration Process
  61. Transient computational fluid dynamics modeling of pervaporation separation of aromatic/aliphatic hydrocarbon mixtures using polymer composite membrane
  62. Pervaporation study of ethylene glycol dehydration through synthesized (PVA–4A)/polypropylene mixed matrix composite membranes
  63. Effects of Hydrothermal Parameters on the Synthesis of Nanocrystalline Zeolite NaY
  64. Sorption properties of hydrogen-selective PDMS/zeolite 4A mixed matrix membrane
  65. Nitrate removal from water using functionalized carbon nanotube sheets
  66. Experimental and ANFIS modeling for fouling analysis of oily wastewater treatment using ultrafiltration
  67. Hydrogen separation and purification using crosslinkable PDMS/zeolite A nanoparticles mixed matrix membranes
  68. Purification of biologically treated Tehran refinery oily wastewater using reverse osmosis
  69. Application of Taguchi experimental design in optimization of desalination using purified carbon nanotubes as adsorbent
  70. Experimental investigation and mathematical modeling of oxygen permeation through dense Ba0.5Sr0.5Co0.8Fe0.2O3− (BSCF) perovskite-type ceramic membranes
  71. Effect of Operating Conditions on PV Performance of PVA Membranes: Experimental and Neural Network Modeling
  72. Pervaporation separation of toluene/n-heptane mixtures using a MSE-modified membrane: Effects of operating conditions
  73. Mixed matrix membranes for pervaporative separation of isopropanol/water mixtures
  74. Preparation and Oxygen Permeation of La0.6Sr0.4Co0.2Fe0.8O3−δ (LSCF) Perovskite-Type Membranes: Experimental Study and Mathematical Modeling
  75. Synthesis and Characterization of Ceramic Membranes (W-Type Zeolite Membranes)
  76. Effects of air sparging, cross flow velocity and pressure on permeation flux enhancement in industrial oily wastewater treatment using microfi ltration
  77. OXYGEN PERMEATION PERFORMANCE OF Ba0.2Sr0.8Co0.8Fe0.2O3−δ PEROVSKITE-TYPE DENSE CERAMIC MEMBRANE
  78. Effect of ultrasonic waves on flux enhancement in microfiltration of milk
  79. Oily wastewater treatment using mullite ceramic membrane
  80. Preparation and characterization of mullite tubular membranes
  81. Recovery of alcohols from water using polydimethylsiloxane-silica nanocomposite membranes: Characterization and pervaporation performance
  82. RETRACTED: A modeling approach based on the Maxwell–Stefan theory for pervaporation using home made nanopore NaA zeolite membranes
  83. Separation of heavy gases from light gases using synthesized PDMS nano-composite membranes: Experimental and neural network modeling
  84. Simulation and determination of optimum conditions of pervaporative dehydration of isopropanol process using synthesized PVA–APTEOS/TEOS nanocomposite membranes by means of expert systems
  85. Preparation of nano pore hydroxysodalite zeolite membranes using of kaolin clay and chemical sources
  86. Synthesis and characterization of carbon nanotubes/poly vinyl alcohol nanocomposite membranes for dehydration of isopropanol
  87. Synthesis and Characterization of Polyimide Mixed Matrix Membranes
  88. Mullite ceramic membranes for industrial oily wastewater treatment: experimental and neural network modeling
  89. Improvement in gas separation properties of a polymeric membrane through the incorporation of inorganic nano-particles
  90. Effects of different carbon precursors on synthesis of multiwall carbon nanotubes: Purification and Functionalization
  91. Effects of gel parameters on the synthesis and characteristics of W-type zeolite nanoparticles
  92. Pure and mixed gas permeation through a composite polydimethylsiloxane membrane
  93. CFD simulation of natural gas sweetening in a gas–liquid hollow-fiber membrane contactor
  94. Salty water desalination using carbon nanotubes membrane
  95. Oxygen permeation of BaxSr1−xCo0.8Fe0.2O3−δ perovskite-type membrane: Experimental and modeling
  96. Oily wastewater treatment using a hybrid UF/RO system
  97. Flux decline and membrane fouling in cross-flow microfiltration of oil-in-water emulsions
  98. CFD simulation of water removal from water/ethylene glycol mixtures by pervaporation
  99. Permanent hard water softening using carbon nanotube sheets
  100. Corrigendum to “Effect of operating parameters on pure and mixed gas permeation properties of a synthesized composite PDMS/PA membrane” [J. Membr. Sci. 342 (2009) 327–340]
  101. Corrigendum to “Ternary gas permeation through a synthesized PDMS membrane: Experimental and modeling” [J. Membr. Sci. 344 (2009) 225–236]
  102. Polyethersulfone/polyacrylonitrile blend ultrafiltration membranes with different molecular weight of polyethylene glycol: preparation, morphology and antifouling properties
  103. Dehydration of isopropanol by PVA–APTEOS/TEOS nanocomposite membranes
  104. Investigation of hydrothermal synthesis parameters on characteristics of T type zeolite crystal structure
  105. Preparation, Characterization and Gas Permeation of Polyimide Mixed Matrix Membranes
  106. Preparation, Characterization and Gas Permeation of Polyimide Mixed Matrix Membranes
  107. Adsorption of divalent heavy metal ions from water using carbon nanotube sheets
  108. Modeling of unsteady-state permeation of gas mixture through a self-synthesized PDMS membranes
  109. Ceramic membrane performance in microfiltration of oily wastewater
  110. Mechanisms and experimental results of aqueous mixtures pervaporation using nanopore HS zeolite membranes
  111. Effect of PEG additive and coagulation bath temperature on the morphology, permeability and thermal/chemical stability of asymmetric CA membranes
  112. Experimental performance evaluation of polymeric membranes for treatment of an industrial oily wastewater
  113. Preparation of mordenite membranes for dehydration of water–UDMH
  114. Prediction of ternary gas permeation through synthesized PDMS membranes by using Principal Component Analysis (PCA) and fuzzy logic (FL)
  115. Performance study of mullite and mullite–alumina ceramic MF membranes for oily wastewaters treatment
  116. Effect of annealing temperature and time on structure and performance of poly(vinyl)alcohol nanocomposite membranes
  117. Separation of ethylene glycol-water mixtures with composite poly(vinyl alcohol)-polypropylene membranes
  118. Salty water desalination using carbon nanotube sheets
  119. Experimental investigation of oily wastewater treatment using combined membrane systems
  120. The pilot-scale pervaporation plant using tubular-type module with nano pore zeolite membrane
  121. Preparation and C3H8/Gas Separation Properties of a Synthesized Single Layer PDMS Membrane
  122. Dimensional analysis of permeation flux for microfiltration of oily wastewaters using mullite ceramic membranes
  123. Permeate flux decline during UF of oily wastewater: Experimental and modeling
  124. Improvement of permeation performance of polyethersulfone (PES) ultrafiltration membranes via addition of Tween-20
  125. Asymmetric cellulose acetate dialysis membranes: Synthesis, characterization, and performance
  126. PVA–APTEOS/TEOS Hybrid Sol–Gel Pervaporation Membrane for Dehydration of Ethanol
  127. Synthesis and gas permeation properties of a single layer PDMS membrane
  128. C3H8 separation from CH4 and H2 using a synthesized PDMS membrane: Experimental and neural network modeling
  129. Preparation and characterization of asymmetric polyethersulfone (PES) membranes
  130. Cellulose acetate (CA)/polyvinylpyrrolidone (PVP) blend asymmetric membranes: Preparation, morphology and performance
  131. Effects of Tween 80 concentration as a surfactant additive on morphology and permeability of flat sheet polyethersulfone (PES) membranes
  132. Effects of PEG on Morphology and Permeation Properties of Polyethersulfone Membranes
  133. Synthesis and characterization of asymmetric polyethersulfone membranes: effects of concentration and polarity of nonsolvent additives on morphology and performance of the membranes
  134. Application of Taguchi method in optimization of desalination by vacuum membrane distillation
  135. Treatment of sea water using electrodialysis: Current efficiency evaluation
  136. Ternary gas permeation through a synthesized PDMS membrane: Experimental and modeling
  137. Gas permeation through a synthesized composite PDMS/PES membrane
  138. Effect of operating parameters on pure and mixed gas permeation properties of a synthesized composite PDMS/PA membrane
  139. Effect of Ba Content on Oxygen Permeation Performance of BaxSr1−xCo0.8Fe0.2O3-δ (x = 0.2, 0.5, and 0.8) Perovskite-Type Membrane
  140. Neural network modeling of Pb2+ removal from wastewater using electrodialysis
  141. Coupling a mathematical and a fuzzy logic-based model for prediction of zinc ions separation from wastewater using electrodialysis
  142. Synthesis and characterization of polyethersulfone membranes
  143. Effect of production conditions on morphology and permeability of asymmetric cellulose acetate membranes
  144. High-salinity water desalination using VMD
  145. Preparation and characterization of a composite PDMS membrane on CA support
  146. Reinvestigation of the Permeation Behaviour of a Ba0.5Sr0.5Co0.8Fe0.2O3-δ Perovskite-type Membrane
  147. Oily wastewater treatment using ultrafiltration
  148. Effect of poly(vinyl pyrrolidone) concentration and coagulation bath temperature on the morphology, permeability, and thermal stability of asymmetric cellulose acetate membranes
  149. Preparation and characterisation of BaxSr1–xCo0.8Fe0.2O3–δ perovskite-type membranes: Part II
  150. Separation of Isomeric Xylenes: Experimental and Modeling
  151. Preparation and characterisation of BaxSr1–xCo0.8Fe0.2O3–δ perovskite-type membranes: Part I
  152. Synthesis of Carbon Nanotubes on Macroporous Kaolin Substrate via a New Simple CVD Method
  153. Effect of preparation variables on morphology and pure water permeation flux through asymmetric cellulose acetate membranes
  154. Separation of lead ions from wastewater using electrodialysis: Comparing mathematical and neural network modeling
  155. Effect of synthesis parameters on single gas permeation through T-type zeolite membranes
  156. Effect of operating conditions on pervaporation of methanol/methyl tert-butyl ether mixtures
  157. CFD modeling of porous membranes
  158. Synthesis and Characterization of Poly(ether-block-amide) Membranes
  159. Ion-exchanged zeolite X membranes: synthesis and characterisation
  160. Sea water desalination using electrodialysis
  161. Wastewater treatment of desalting units
  162. Effect of operating parameters on concentration of citric acid using electrodialysis
  163. Separation of different ions from wastewater at various operating conditions using electrodialysis
  164. Chemical cleaning of ultrafiltration membranes in the milk industry
  165. Mathematical modeling of desalination by electrodialysis
  166. Synthesis of MFI zeolite membranes for water desalination
  167. Separation of monovalent, divalent and trivalent ions from wastewater at various operating conditions using electrodialysis
  168. Pervaporation separation of binary and ternary mixtures with polydimethylsiloxane membranes
  169. Synthesis and characterization of poly(ether-block-amide) membranes for the pervaporation of organic/aqueous mixtures
  170. Effect of sintering temperature and dwell time and pressing pressure on Ba0.5Sr0.5Co0.8Fe0.2O3−δ perovskite-type membranes
  171. Potential leakage at the Khersan 3 Dam Site, Iran: a hydrogeological approach
  172. Effect of operating conditions on pervaporation of methanol-water mixtures: Part 2
  173. Concentration of l-lysine monohydrochloride (l-lysine–HCl) syrup using vacuum membrane distillation
  174. Effect of permeate pressure on pervaporation of methyl tert-butyl ether/methanol mixtures
  175. Microfiltration of oily wastewater using PP hydrophobic membrane
  176. Zeolite NaA membranes synthesis
  177. Effect of operating conditions on pervaporation of methanol—water mixtures: Part 1
  178. Preparation of NaA zeolite membranes for separation of water/UDMH mixtures
  179. Mathematical modeling of flux decline in ultrafiltration
  180. Separation of water in oil emulsions using microfiltration
  181. Separation of water/UDMH mixtures using hydroxysodalite zeolite membranes
  182. Pervaporation of dilute alcoholic mixtures using PDMS membrane
  183. Modeling of metal ion removal from wastewater by electrodialysis
  184. Separation of copper ions by electrodialysis using Taguchi experimental design
  185. Wastewater treatment using ultrafiltration at a vegetable oil factory
  186. Effect of operating conditions on microfiltration of an oil-water emulsion by a kaolin membrane
  187. Dehydration of water/1-1-dimethylhydrazine mixtures by zeolite membranes
  188. Water shortage and seawater desalination by electrodialysis
  189. Effect of calcination temperature of kaolin as a support for zeolite membranes
  190. Making zeolite A membrane from kaolin by electrophoresis
  191. Chemical cleaning of a polyamide membrane
  192. Chemical cleaning of reverse osmosis membranes