All Stories

  1. Effects of extrusion speed and compounds on surface defects in extruded-AA7003 alloy

    Article • Materials Science and Technology, May 2021, Taylor & Francis

    Tomoyuki Homma

  2. Studies on the variability of the Greenland Ice Sheet and climate

    Article • Polar Science, March 2021, Elsevier

    Tomoyuki Homma

  3. Temporal and spatial variabilities in surface mass balance at the EGRIP site, Greenland from 2009 to 2017

    Article • Polar Science, March 2021, Elsevier

    Tomoyuki Homma

  4. The Hume-Rothery electron concentration rule studied through interference phenomena in a series of cP12 compounds with either a true gap or pseudogap across the Fermi level

    Article • The Philosophical Magazine A Journal of Theoretical Experimental and Applied Physics, December 2019, Taylor & Francis

    Tomoyuki Homma

  5. Effect of Copper Addition on Precipitation Behavior near Grain Boundary in Al–Zn–Mg Alloy

    Article • MATERIALS TRANSACTIONS, August 2019, Japan Institute of Metals

    Adrian Lervik, Seungwon Lee, Tomoyuki Homma

  6. Characterisation of structural similarities of precipitates in Mg–Zn and Al–Zn–Mg alloys systems

    Article • The Philosophical Magazine A Journal of Theoretical Experimental and Applied Physics, July 2019, Taylor & Francis

    Dr. Masatake Yamaguchi, Tomoyuki Homma, Adrian Lervik

  7. Effects of microparticles on deformation and microstructural evolution of fine-grained ice

    Article • Journal of Glaciology, May 2019, Cambridge University Press

    Tomoyuki Homma

  8. Effects of Re substitution for Mn on microstructures and properties in Re-substituted higher manganese silicide thermoelectric material

    Article • Journal of Alloys and Compounds, March 2019, Elsevier

    Tomoyuki Homma

  9. Nanostructural analysis of welded Ti–6Al–4V by linear friction welding applied for blisk assemblies

    Article • Materialia, March 2019, Elsevier

    Tomoyuki Homma

  10. Microstructural analysis of Greenland ice using a cryogenic scanning electron microscope equipped with an electron backscatter diffraction detector

    Article • Bulletin of Glaciological Research, January 2019, Japanese Society of Snow and Ice

    Tomoyuki Homma

  11. Enhancement in age hardenability of sintered Ti–5Fe alloy by Zr addition processed by pulsed electric current sintering

    Article • The Philosophical Magazine A Journal of Theoretical Experimental and Applied Physics, June 2018, Taylor & Francis

    Tomoyuki Homma

  12. Effect of alloying elements on microstructural evolution in oxygen content controlled Ti-29Nb-13Ta-4.6Zr (wt%) alloys for biomedical applications during aging

    Article • Materials Science and Engineering A, January 2018, Elsevier

    Tomoyuki Homma

  13. Improving creep property of Mg–Gd–Zn alloy via trace Ca addition

    Article • Scripta Materialia, October 2017, Elsevier

    Tomoyuki Homma

  14. Dispersion of nanoscale oxides in MnSi1.73 fabricated by solid state reaction and pulsed electric current sintering

    Article • Frontiers in Human Neuroscience, March 2016, American Institute of Physics

    Tomoyuki Homma

  15. Application of the Bons–Azuma method and determination of grain growth mechanism in rolled Ti–Zr alloys

    Article • Philosophical Magazine Letters, December 2015, Taylor & Francis

    Tomoyuki Homma

  16. Activation of {1 01¯

    Article • Journal of Alloys and Compounds, July 2013, Elsevier

    Tomoyuki Homma

  17. Microstructure Characteristics and Mechanical Properties of Al 413/Mg Joint in Compound Casting Process

    Article • Metallurgical and Materials Transactions A, September 2012, Springer Science + Business Media

    Tomoyuki Homma

  18. Development of an extruded Mg–Zn–Ca-based alloy: new insight on the role of Mn addition in precipitation

    Article • The Philosophical Magazine A Journal of Theoretical Experimental and Applied Physics, April 2012, Taylor & Francis

    Tomoyuki Homma

  19. Effects of different cooling rates during two casting processes on the microstructures and mechanical properties of extruded Mg–Al–Ca–Mn alloy

    Article • Materials Science and Engineering A, April 2012, Elsevier

    Tomoyuki Homma

  20. Intermetallic compounds and antiphase domains in Al/Mg compound casting

    Article • Intermetallics, April 2012, Elsevier

    Tomoyuki Homma

  21. Effect of Sn Addition in Preprecipitation Stage in Al-Cu Alloys: A Correlative Transmission Electron Microscopy and Atom Probe Tomography Study

    Article • Metallurgical and Materials Transactions A, March 2012, Springer Science + Business Media

    Tomoyuki Homma

  22. Room and elevated temperature mechanical properties in the as-extruded Mg–Al–Ca–Mn alloys

    Article • Materials Science and Engineering A, March 2012, Elsevier

    Tomoyuki Homma

  23. Effect of Cu addition on mechanical properties of Mg^|^ndash;Gd^|^ndash;Zn^|^ndash;Zr casting alloy

    Article • Journal of Japan Institute of Light Metals, January 2012, Japan Institute of Light Metals

    Tomoyuki Homma

  24. Unexpected influence of Mn addition on the creep properties of a cast Mg–2Al–2Ca (mass%) alloy

    Article • Acta Materialia, December 2011, Elsevier

    Kazuhiro Hono, Tomoyuki Homma

  25. Twins, recrystallization and texture evolution of a Mg–5.99Zn–1.76Ca–0.35Mn (wt.%) alloy during indirect extrusion process

    Article • Scripta Materialia, November 2011, Elsevier

    Tomoyuki Homma

  26. Dissimilar joining of Al/Mg light metals by compound casting process

    Article • Journal of Materials Science, October 2011, Springer Science + Business Media

    Tomoyuki Homma

  27. High-strength extruded Mg–Al–Ca–Mn alloy

    Article • Scripta Materialia, August 2011, Elsevier

    Kazuhiro Hono, Tomoyuki Homma

  28. Effect of homogenization on microstructures and mechanical properties of hot compressed Mg–9Al–1Zn alloy

    Article • Materials Science and Engineering A, March 2011, Elsevier

    Tomoyuki Homma

  29. Experimental Evaluation of a High Speed Flywheel for an Energy Cache System

    Article • IOP Conference Series Materials Science and Engineering, March 2011, Institute of Physics Publishing

    Tomoyuki Homma

  30. Fabrication of Thermoelectric Mg2Si by Mechanofusion and Pulsed Electric Current Sintering

    Article • IOP Conference Series Materials Science and Engineering, March 2011, Institute of Physics Publishing

    Tomoyuki Homma

  31. Improvement of the mechanical properties of Mg-Gd-Y-Zn alloy castings by grain refinement

    Article • IOP Conference Series Materials Science and Engineering, March 2011, Institute of Physics Publishing

    Tomoyuki Homma

  32. Twins, shear bands and recrystallization of a Mg–2.0%Zn–0.8%Gd alloy during rolling

    Article • Scripta Materialia, January 2011, Elsevier

    Tomoyuki Homma

  33. Improvement in creep property of a cast Mg–6Al–3Ca alloy by Mn addition

    Article • Scripta Materialia, December 2010, Elsevier

    Tomoyuki Homma

  34. Recrystallization mechanism and the relationship between grain size and Zener–Hollomon parameter of Mg–Al–Zn–Ca alloys during hot compression

    Article • Scripta Materialia, August 2010, Elsevier

    Tomoyuki Homma

  35. Effect of Zr addition on the mechanical properties of as-extruded Mg–Zn–Ca–Zr alloys

    Article • Materials Science and Engineering A, April 2010, Elsevier

    Kazuhiro Hono, Tomoyuki Homma

  36. Numerical simulation for microstructure evolution in AM50 Mg alloy during hot rolling

    Article • Computational Materials Science, February 2010, Elsevier

    Tomoyuki Homma

  37. Recrystallization mechanism of as-cast AZ91 magnesium alloy during hot compressive deformation

    Article • Materials Science and Engineering A, December 2009, Elsevier

    Tomoyuki Homma

  38. Bimodally grained microstructure development during hot extrusion of Mg–2.4 Zn–0.1 Ag–0.1 Ca–0.16 Zr (at.%) alloys

    Article • Acta Materialia, October 2009, Elsevier

    Kazuhiro Hono, Tomoyuki Homma

  39. Effect of Mg17Al12 precipitates on the microstructural changes and mechanical properties of hot compressed AZ91 magnesium alloy

    Article • Materials Science and Engineering A, October 2009, Elsevier

    Tomoyuki Homma

  40. Fabrication of extraordinary high-strength magnesium alloy by hot extrusion

    Article • Scripta Materialia, September 2009, Elsevier

    Tomoyuki Homma

  41. Dynamic microstructural changes in Mg–9Al–1Zn alloy during hot compression

    Article • Scripta Materialia, August 2009, Elsevier

    Tomoyuki Homma

  42. Effect of pre-aging treatment on microstructure and mechanical properties of hot compressed Mg–9Al–1Zn alloy

    Article • Materials Science and Engineering A, August 2009, Elsevier

    Tomoyuki Homma

  43. Nanostructured Al–Al2O3 composite formed in situ during consolidation of ultrafine Al particles by back pressure equal channel angular pressing

    Article • Acta Materialia, August 2009, Elsevier

    Tomoyuki Homma

  44. High temperature tensile properties of as-cast Mg–Al–Ca alloys

    Article • Materials Science and Engineering A, May 2009, Elsevier

    Tomoyuki Homma

  45. Synthesis of high-strength magnesium alloy composites reinforced with Si-coated carbon nanofibres

    Article • Scripta Materialia, March 2009, Elsevier

    Tomoyuki Homma

  46. Precipitation-hardenable Mg–2.4Zn–0.1Ag–0.1Ca–0.16Zr (at.%) wrought magnesium alloy

    Article • Acta Materialia, February 2009, Elsevier

    Kazuhiro Hono, Tomoyuki Homma

  47. FEM analysis for hot rolling process of AM60 alloy

    Article • Transactions of Nonferrous Metals Society of China, December 2008, Elsevier

    Tomoyuki Homma

  48. A high-strength Mg–Sn–Zn–Al alloy extruded at low temperature

    Article • Scripta Materialia, November 2008, Elsevier

    Kazuhiro Hono, Tomoyuki Homma

  49. Atom probe specimen fabrication methods using a dual FIB/SEM

    Article • Ultramicroscopy, September 2007, Elsevier

    Tomoyuki Homma

  50. High strength ultrafine/nanostructured aluminum produced by back pressure equal channel angular processing

    Article • Frontiers in Human Neuroscience, July 2007, American Institute of Physics

    Tomoyuki Homma

  51. Effect of Zn additions on the age-hardening of Mg–2.0Gd–1.2Y–0.2Zr alloys

    Article • Acta Materialia, July 2007, Elsevier

    Kazuhiro Hono, Tomoyuki Homma

  52. Ultrafine pure aluminium through back pressure equal channel angular consolidation (BP-ECAC) of particles

    Article • Journal of Materials Science, January 2007, Springer Science + Business Media

    Tomoyuki Homma

  53. Corrigendum to “Chemistry of nanoscale precipitates in Mg–2.1Gd–0.6Y–0.2Zr (at.%) alloy investigated by the atom probe technique” [Mater. Sci. Eng. A 395 (2005) 301–306]

    Article • Materials Science and Engineering A, September 2005, Elsevier

    Kazuhiro Hono, Tomoyuki Homma

  54. Chemistry of nanoscale precipitates in Mg–2.1Gd–0.6Y–0.2Zr (at.%) alloy investigated by the atom probe technique

    Article • Materials Science and Engineering A, March 2005, Elsevier

    Kazuhiro Hono, Tomoyuki Homma

  55. Coincidence Doppler broadening and 3DAP study of the pre-precipitation stage of an Al–Li–Cu–Mg–Ag alloy

    Article • Acta Materialia, April 2004, Elsevier

    Kazuhiro Hono, Tomoyuki Homma

  56. Coincidence Doppler broadening study of the pre-precipitation stage of an Al[sbnd]Cu[sbnd]Mg[sbnd]Ag alloy

    Article • Philosophical Magazine A, May 2002, Taylor & Francis

    Tomoyuki Homma