All Stories

  1. IMPACT DYNAMIC PROPERTIES OF MAGNESIUM OXYCHLORIDE-DOPED PAPER SLUDGE COMPOSITES
  2. Dynamic impact mechanical properties of red sandstone based on digital image correlation method
  3. Effect of the Connectivity of Weak Rock Zones on the Mining-Induced Deformation of Rock Slopes in an Open-Pit Mine
  4. Advancing Sustainability in Geotechnical Engineering
  5. Enhancing shale gas recovery: An interdisciplinary power-law model of hydro-mechanical-fracture dynamics
  6. EXPERIMENTAL RESEARCH ON MECHANICAL PROPERTIES OF MAGNESIUM OXYCHLORIDE-BASED TITANIUM GYPSUM CONCRETE
  7. The Effects of Coal Floor Brittleness on the Risk of Water Inrushes from Underlying Aquifers: A Numerical Study
  8. Microscopic mechanical analysis of K0 of granular soils with particle size distribution and rolling resistance effects
  9. EFFECTS OF MODIFIERS ON MAGNESIUM OXYCHLORIDE CEMENT DOPED WITH PAPER MILL SLUDGE
  10. Damage Mode and Energy Consumption Characteristics of Paper-Sludge-Doped Magnesium Chloride Cement Composites
  11. ANALYSIS ON ENERGY ABSORPTION CAPACITY OF MIXED LIGHT WEIGHT CONCRETE (MLWC) UNDER ELECTROMAGNETIC DRIVING SPLIT HOPKINSON PRESSURE BAR (SHPB) CONDITION
  12. Elastic Properties and Damage Evolution Analysis for Lightweight Shale Ceramsite Concrete
  13. Seismic Performance of an Exterior Joint between a Square Steel Tube Column and an H-Shape Steel Beam
  14. MECHANICAL PROPERTIES AND MICROSCOPIC MECHANISM OF PAPER MILL SLUDGE-MAGNESIUM OXYCHLORIDE CEMENT COMPOSITES
  15. Design Method for Reinforced Concrete Based on Bond-Slip Energy Consumption
  16. Frequency Spectrum and Damage Characteristics of Saturated and Dry Red Sandstone Subject to Shear Test
  17. Numerical simulation of brittleness effect on propagation behavior of glutenite hydraulic fractures
  18. New Method for Reducing Coal Mine Gas Disasters via Directional Drilling and Hydraulic Jet
  19. Size Effect Analysis of Scale Test Model for High-speed Railway Foundation under Dynamic Loading Condition
  20. Controlling Vibration Speed in Tunnel Excavation Using Fine Blasting Method under Complex Environmental Conditions
  21. Formation of X-shaped hydraulic fractures in deep thick glutenite reservoirs: A case study in Bohai Bay Basin, East China
  22. Structure evolutions with enhanced dielectric permittivity and ferroelectric properties of Ba(1−x)(La, Li)xTiO3 ceramics
  23. MECHANICAL PERFORMANCE OF TEXTILE REINFORCED CONCRETE CONTAINING STEEL FIBERS AND BASALT FIBERS SUBJECTED TO HIGH TEMPERATURES
  24. Meso-Scale Simulations of Lightweight Aggregate Concrete under Impact Loading
  25. Seepage Behaviour of Fractured Rock Mass Infilling Using Different Transfixion Rates under Cyclic Loading
  26. Multi-walled carbon nanotubes/polyaniline on the ethylenediamine modified polyethylene terephthalate fibers for a flexible room temperature ammonia gas sensor with high responses
  27. ANCHORING PERFORMANCES ANALYSIS OF TENSION-TORSION GROUTED ANCHOR UNDER FREE AND NON-FREE ROTATING CONDITIONS
  28. Experimental Study on Influence of Ultra-fine Cement Content on Mechanical Properties of Modified Sludge
  29. Foundation Adaptability and Subgrade Deformation Analysis of High-Speed Railway above the Mined-Out Areas
  30. Theoretical Solution of Elastic Foundation Beam based on the Principle of Minimum Complementary Energy
  31. Experimental Investigation on Formation and Evolution Characteristics of Frozen Wall under Salty Groundwater Seepage
  32. ZnO–SnO2 nano-heterostructures with high-energy facets for high selective and sensitive chlorine gas sensor
  33. Mechanical behavior of lightweight concrete structures subjected to 3D coupled static–dynamic loads
  34. Acoustic Emission Characteristics and Dynamic Damage Constitutive Relation of Shale-Ceramsite Concrete Subjected to Loading Tests
  35. [(Bi0.50Na0.40K0.10)0.94Ba0.06]1-xLaxTi0.975Ta0.025O3 lead-free relaxor ceramics with high energy storage density and thermally stable dielectric properties
  36. Enhanced storage energy density and fatigue free properties for 0.94Bi0.50(Na0.78K0.22)0.50Ti1-(Al0.50Nb0.50) O3-0.06BaZrO3 ceramics
  37. Mechanical properties and dynamic constitutive relation of lightweight shale ceramsite concrete
  38. Mechanical Performances Analysis of Tension-Torsion Coupling Anchor Cable
  39. Analysis of Vibration Attenuation and Energy Consumption of Blasting Demolition Chimney: A Case Study
  40. Failure mechanism and constitutive relation for an anchorage segment of an anchor cable under pull-out loading
  41. High strain and high energy density of lead-free (Bi0.50Na0.40K0.10)0.94Ba0.06Ti(1−x)(Al0.50Ta0.50)xO3 perovskite ceramics
  42. COUPLING EFFECT ANALYSIS OF TENSION AND REVERSE TORQUE DURING AXIAL TENSILE TEST OF ANCHOR CABLE
  43. Enhanced energy-storage performance and thermally stable permittivity for K0.5Na0.5NbO3 modified [(Na0.5Bi0.5)0.84Sr0.16]0.98La0.01TiO3 lead-free perovskite ceramics
  44. Optimization analysis of heavy metal pollutants removal from fine-grained soil by freeze-thaw and washing technology
  45. Facile metal-organic frameworks-templated fabrication of hollow indium oxide microstructures for chlorine detection at low temperature
  46. High energy storage density and stable fatigue resistance of Na0.46Bi0.46Ba0.05La0.02Zr0.03Ti0.97-Sn O3 ceramics
  47. Strength Characteristics and Empirical Criterion of Dry and Saturated Sandstone Subjected to Compression Test
  48. High sensitivity and ultra-low detection limit of chlorine gas sensor based on In2O3 nanosheets by a simple template method
  49. Multi-objective Optimization of Construction Project Based on Improved Ant Colony Algorithm
  50. Microseismic monitoring and application
  51. Structural effect of rock blocks
  52. Analysis of Damage Evolution Characteristics of Surrounding Rock in Deep Anchorage Cavern under Dynamic Loading
  53. Spatial Distribution Law of Vibration Acceleration of Ultra-small-spacing Tunnel under Train Moving Loads
  54. MECHANICAL PERFORMANCES OF CEMENT-GYPSUM COMPOSITE MATERIAL CONTAINING A WEAK INTERLAYER WITH DIFFERENT ANGLES
  55. Mechanical Performances of Transverse Rib Bar During Pull-Out Test
  56. Remediation of Cd- and Pb- contaminated clay soils through combined freeze-thaw and soil washing
  57. Evolution Characteristics of Composite Pressure-Arch in Thin Bedrock of Overlying Strata During Shallow Coal Mining
  58. Stability of Step-shaped Dump Slope and Reinforcement Optimization Analysis of Anti-slide Piles
  59. STRENGTH INDICES AND CONVERSION RELATIONS FOR BASALT FIBER-REINFORCED RECYCLED AGGREGATE CONCRETE
  60. Height of fractured zone inside overlying strata under high-intensity mining in China
  61. Mechanical Performances of Pressure Arch in Thick Bedrock during Shallow Coal Mining
  62. Pressure-Arching Characteristics of Fractured Strata Structure during Shallow Horizontal Coal Mining
  63. Pressure-Arching Characteristics in Roof Blocks during Shallow Coal Mining
  64. A New Method of Predicting the Height of the Fractured Water-Conducting Zone Due to High-Intensity Longwall Coal Mining in China
  65. NOVEL METHOD OF 3D SLOPE STABILITY ANALYSIS AND ITS ENGINEERING APPLICATION
  66. Thermal radiation characteristics of stress evolution of a circular tunnel excavation under different confining pressures
  67. Evolution Characteristics of Pressure-Arch and Elastic Energy during Shallow Horizontal Coal Mining
  68. Crack propagation from a filled flaw in rocks considering the infill influences
  69. Instability characteristics of the cracked roof rock beam under shallow mining conditions
  70. Mechanical performances of rock-concrete bi-material disks under diametrical compression
  71. Analytical derivation of rib bearing angle of reinforcing bar subject to axial loading
  72. The Effect of Confining Pressure and Water Content on Energy Evolution Characteristics of Sandstone under Stepwise Loading and Unloading
  73. Pullout Performances of Grouted Rockbolt Systems with Bond Defects
  74. Formation of cracks in layered rock considering layer thickness variations
  75. Near-fault mining induced microseismic distribution characteristics and its influencing factors
  76. Multiple indicators prediction method of rock burst based on microseismic monitoring technology
  77. A mechanical model for conebolts
  78. Experimental Research on Energy Release Characteristics of Water-Bearing Sandstone Alongshore Wharf
  79. COMPORTAMIENTO DE UN ANCLAJE TOTALMENTE EMBUTIDO EN ROCAS ADYACENTES, SOMETIDO A ENSAYOS DE DOBLE CORTADURA (CIZALLADO)
  80. Experimental Study on Deformation and Strength Characteristics of Sandstone with Different Water Contents
  81. RECOMENDACIONES BASADAS EN EL EFECTO DESCARGA SOBRE LOS PARÁMETROS DE DETERIORO DE LAS ROCAS CIRCUNDANTES DURANTE LA EXCAVACIÓN DE TÚNELES PROFUNDOS
  82. Skewed Pressure Characteristics of Equivalent Load in Double-Arch Tunnel
  83. Evolution Characteristics Analysis of Pressure - Arch of a Highway Tunnel under Different Stress Conditions
  84. Skewed pressure characteristics induced by step-by-step excavation of a double-arch tunnel based on infrared thermography
  85. Evolution Characteristic Analysis of Pressure - arch of a Double - arch Tunnel in Water - rich Strata
  86. Evolution characteristics analysis of pressure-arch in a double-arch tunnel
  87. Rockbolting
  88. Preface
  89. Mining Geomechanics
  90. Slope Engineering
  91. Rock Testing
  92. Grouted Cable
  93. Tunnel Engineering
  94. ANÁLISIS DE LA VERIFICACIÓN POR SIMULACIÓN DE LAS CARACTERÍSTICAS DE ANCLADO DE BARRAS DE ACERO CON ENTALLA TRANSVERSAL DURANTE EL ENSAYO DE EXTRACCIÓN
  95. Defects Visualization Using Acoustic Emission Tomography Technique
  96. Distribution characteristics analysis of pressure-arch in horizontal stratified rocks under coal mining conditions
  97. Stability Analysis of Tunnel - Slope Coupling Based on Genetic Algorithm
  98. Potential Risk Analysis of Tailings Dam under Preloading Condition and Its Countermeasures
  99. ANÁLISIS DE INESTABILIDAD DEL ARCO DE PRESIÓN EN UNA MINA DE CARBÓN BAJO DIFERENTES ÁNGULOS DE ESTRATOS
  100. Optimization of construction scheme and supporting technology for HJS soft rock tunnel
  101. Borehole stability build sections of horizontal wells for anisotropic coal seam
  102. Mechanics Evolution Characteristics Analysis of Pressure - arch in Fully - mechanized Mining Field
  103. Particle - scale Analysis of Key Technologies on Cut - and - over Tunnel in Slope Engineering
  104. Fracture Characteristics Analysis of Double - layer Rock Plates with Both Ends Fixed Condition
  105. Rock-Arch Instability Characteristics of the Sandstone Plate under Different Loading Conditions
  106. Analysis of Pre-Blasting Cracks in Horizontal Section Top-coal Mechanized Caving of Steep Thick Seams
  107. Analytical Solution to the Roof Bending Deflection with Mixed Boundary Conditions under Uniform Load
  108. Experimental Research on the Instability Characteristics of Double-layer Rock Plates Based on MTS-AE System
  109. Analysis of Separation and Dislocation Characteristics of Layered Roof in the Mined-Out Areas
  110. Fractal Characteristics of Sandstone Cutting Fracture under Mechanical Shock Loading Conditions
  111. Water Inrush Characteristics with Roadway Excavation Approaching to Fault
  112. Analysis of Accumulated Damage Effects on the Roof of Mined-Out Areas Under Blasting Vibration Waves
  113. Ground Settlement Prediction Model and its Application for Tunneling Engineering above Mined-Out Regions
  114. Optimization Analysis of Mining Sequence to Danhou Coal Mine under Complicated Hydrogeological Conditions
  115. Analysis of Creep Characteristics of Shallow Mined-Out Areas Roof under Low Stress Conditions
  116. 3D Complicated Model Establishment and Analysis of Interactions between the Mined-Out Regions and Surface Structures
  117. Analytical solution of the roof safe thickness of the mined-out areas under dynamic loading
  118. Analysis of Accumulated Damage Effects on the Roof of Mined-Out Areas under Blasting Vibration
  119. Numerical analysis of surface deformation characteristics for highway above mined-out regions
  120. Research on the energy dissipation and stress distribution characteristics of the excavated circular tunnel under high stress conditions
  121. 3D deformation effect and optimal excavated design of surface mine
  122. Design of cavern blasting based on controllable parameters
  123. Bilateral cumulative tensile blasting and engineering applications