Contact

All Stories

  1. Synthesis of Co-Deposited Hexagonal Boron Nitride for Thermally-Efficient Tribological Performance

    Article • Advanced Materials Research, July 2015, Trans Tech Publications

    Professor Shahjahan Mridha, M A Maleque

  2. Optimization of Hardness Behaviour of TIG Modified Ceramic Coating Using the Taguchi Approach

    Article • Advanced Materials Research, July 2015, Trans Tech Publications

    Professor Shahjahan Mridha, M A Maleque

  3. Laser and GTAW torch processing of Fe–Cr–B coatings on steel

    Article • Materials Science and Technology, April 2014, Taylor & Francis

    Professor Shahjahan Mridha

  4. Overlapping tracks processed by TIG melting TiC preplaced powder on low alloy steel surfaces

    Article • Materials Science and Technology, March 2014, Taylor & Francis

    Professor Shahjahan Mridha

  5. Influence of shielding gases on preheat produced in surface coatings incorporating SiC particulates into microalloy steel using TIG technique

    Article • Materials Science and Technology, January 2014, Taylor & Francis

    Professor Shahjahan Mridha

  6. Laser and GTAW torch processing of Fe–Cr–B coatings on steel

    Article • Materials Science and Technology, December 2013, Taylor & Francis

    Professor Shahjahan Mridha

  7. Grain refinement and hardness distribution in cryogenically cooled ferritic stainless steel welds

    Article • Materials & Design (1980-2015), May 2013, Elsevier

    Professor Shahjahan Mridha

  8. Microstructure-Hardness Relationship of Inconel 718 Compressor Blade Heat Treated at Different Conditions

    Article • Advanced Materials Research, October 2012, Trans Tech Publications

    Professor Shahjahan Mridha

  9. Influences of Grain Refining Conditions on Sensitization in 16 wt% Chromium Ferritic Stainless Steel Welds

    Article • Advanced Materials Research, October 2012, Trans Tech Publications

    Professor Shahjahan Mridha

  10. Composite Coating on Steel Surfaces by Adding TiC and h-BN Particulates under TIG Torch Melting

    Article • Advanced Materials Research, October 2012, Trans Tech Publications

    Professor Shahjahan Mridha

  11. Microstructure of TIG Melted Composite Coating on Steel Produced Using 1.0 and 1.5 mg/mm2 TiC at an Energy Input of 2640 J/mm

    Article • Advanced Materials Research, October 2012, Trans Tech Publications

    Professor Shahjahan Mridha

  12. Comparative evaluation of grain refinement in AISI 430 FSS welds by elemental metal powder addition and cryogenic cooling

    Article • Materials & Design (1980-2015), March 2012, Elsevier

    Professor Shahjahan Mridha

  13. Grain Refinement in Medium Chromium Ferritic Stainless Steel Welds via Aluminum Powder Addition

    Article • Advanced Materials Research, January 2012, Trans Tech Publications

    Professor Shahjahan Mridha

  14. Parametric Study of Carbide Precipitation in 16wt% Chromium Ferritic Stainless Steel (FSS) Welds

    Article • Advanced Materials Research, January 2012, Trans Tech Publications

    Professor Shahjahan Mridha

  15. Grain Refinement in Medium Chromium Ferritic Stainless Steel Welds via Aluminum Powder Addition

    Article • Advanced Materials Research, January 2012, Trans Tech Publications

    Professor Shahjahan Mridha

  16. Parametric Study of Carbide Precipitation in 16wt% Chromium Ferritic Stainless Steel (FSS) Welds

    Article • Advanced Materials Research, January 2012, Trans Tech Publications

    Professor Shahjahan Mridha

  17. Incorporation of TiC Particulates on AISI 4340 Low Alloy Steel Surfaces via Tungsten Inert Gas Arc Melting

    Article • Advanced Materials Research, January 2012, Trans Tech Publications

    Professor Shahjahan Mridha

  18. Incorporation of TiC Particulates on AISI 4340 Low Alloy Steel Surfaces via Tungsten Inert Gas Arc Melting

    Article • Advanced Materials Research, January 2012, Trans Tech Publications

    Professor Shahjahan Mridha

  19. Structural and Properties Development of Expanded Austenite Layers on AISI 316L after Low Temperature Thermochemical Treatments

    Article • Journal of Applied Sciences, September 2011, Science Alert

    Professor Shahjahan Mridha

  20. Impact Strength of Carbon Reinforced Epoxy Composite at Different Temperatures

    Article • Advanced Materials Research, June 2011, Trans Tech Publications

    Professor Shahjahan Mridha

  21. Effects of Processing Parameters on Microstructures and Properties of TIG Melted Surface Layer of Steel

    Article • Advanced Materials Research, June 2011, Trans Tech Publications

    Professor Shahjahan Mridha

  22. Effect of Energy Input on Microstructure and Hardness of TIG Welded AISI 430-Ferritic Stainless Steel

    Article • Advanced Materials Research, June 2011, Trans Tech Publications

    Professor Shahjahan Mridha

  23. Influence of Moisture Absorption on Impact Strength and Failure Behavior of Hybrid Jute-Carbon/ Epoxy Composite

    Article • Advanced Materials Research, June 2011, Trans Tech Publications

    Professor Shahjahan Mridha

  24. Formation of TiN Dispersed Composite Layer on Steel Surfaces by Titanium Powder Preplacement and TIG Surface Melting Processes

    Article • Advanced Materials Research, June 2011, Trans Tech Publications

    Professor Shahjahan Mridha

  25. Wear Behavior of Modified Surface Layer Produced by TIG Melting of Preplaced Ti Powder in Nitrogen Environment

    Article • Advanced Materials Research, June 2011, Trans Tech Publications

    Professor Shahjahan Mridha

  26. Formation of Ti-Al-N Dispersed Layer on Steel Surface by TIG Melting in a Reactive Environment

    Article • Advanced Materials Research, June 2011, Trans Tech Publications

    Professor Shahjahan Mridha

  27. An Overview of Sensitization Dynamics in Ferritic Stainless Steel Welds

    Article • International Journal of Corrosion, January 2011, Hindawi Publishing Corporation

    Professor Shahjahan Mridha

  28. Grain Refinement in Ferritic Stainless Steel Welds: The Journey so Far

    Article • Advanced Materials Research, December 2009, Trans Tech Publications

    Professor Shahjahan Mridha

  29. Low Temperature Thermochemical Surface Treatment of Austenitic Stainless Steel for Improved Mechanical and Tribological

    Article • Advanced Materials Research, December 2009, Trans Tech Publications

    Professor Shahjahan Mridha

  30. Cryogenic Grinding of Mild Steel and Stainless steel

    Article • Journal for Manufacturing Science and Production, March 2009, De Gruyter

    Professor Shahjahan Mridha

  31. The effects of process variables on the hardness of nitrided 3% chromium steel

    Article • Journal of Materials Processing Technology, May 2008, Elsevier

    Professor Shahjahan Mridha

  32. The effect of OPWF filler on impact strength of glass-fiber reinforced epoxy composite

    Article • Journal of Mechanical Science and Technology, October 2007, Springer Science + Business Media

    Professor Shahjahan Mridha

  33. Gas nitriding of En40B steel with highest growth rate of the case and reduced white layer formation

    Article • International Journal of Microstructure and Materials Properties, January 2007, Inderscience Publishers

    Professor Shahjahan Mridha

  34. Low Temperature Fluidized Bed Nitriding of Austenitic Stainless Steel

    Article • December 2006, CrossRef Test Account

    Professor Shahjahan Mridha, Dr Yong Sun

  35. Low Temperature Fluidized Bed Nitriding of Austenitic Stainless Steel

    Article • Solid State Phenomena, December 2006, Trans Tech Publications

    Professor Shahjahan Mridha, Dr Yong Sun

  36. Growth Kinetics of Hardened Layers Produced during Nitriding in Ammonia Gas Environments

    Article • Materials Science Forum, October 2006, Trans Tech Publications

    Professor Shahjahan Mridha

  37. Performance of Copper and Aluminum Electrodes During EDM of Stainless Steel and Carbide

    Article • Journal for Manufacturing Science and Production, March 2006, De Gruyter

    Professor Shahjahan Mridha

  38. Titanium nitride layer formation by TIG surface melting in a reactive environment

    Article • Journal of Materials Processing Technology, October 2005, Elsevier

    Professor Shahjahan Mridha

  39. Adhesive strength of electroplated copper films

    Article • Journal of Materials Processing Technology, August 2001, Elsevier

    Professor Shahjahan Mridha

  40. DC/pulse plating of copper for trench/via filling

    Article • Journal of Materials Processing Technology, August 2001, Elsevier

    Professor Shahjahan Mridha

  41. Intermetallic coatings produced by TIG surface melting

    Article • Journal of Materials Processing Technology, June 2001, Elsevier

    Professor Shahjahan Mridha

  42. TITANIUM ALUMINIDES - BY SURFACE MELTING

    Article • January 2001, World Scientific Pub Co Pte Lt

    Professor Shahjahan Mridha

  43. Addition of ceramic particles to TIG melted titanium surfaces

    Article • Surface Engineering, June 1999, Taylor & Francis

    Professor Shahjahan Mridha

  44. Fabrication of D.C.-plated nanocrystalline copper electrodeposits

    Article • Journal of Materials Processing Technology, May 1999, Elsevier

    Professor Shahjahan Mridha

  45. Properties of unbalanced magnetron sputtered TiN/NbN multilayer coatings

    Article • Journal of Materials Processing Technology, May 1999, Elsevier

    Professor Shahjahan Mridha

  46. Flip chip interconnect using anisotropic conductive adhesive

    Article • Journal of Materials Processing Technology, May 1999, Elsevier

    Professor Shahjahan Mridha

  47. Annealing of copper electrodeposits

    Article • Journal of Vacuum Science & Technology A Vacuum Surfaces and Films, January 1999, American Vacuum Society

    Professor Shahjahan Mridha

  48. Metal matrix composite layer formation with 3 μm SiCp powder on IMI318 titanium alloy surfaces through laser treatment

    Article • Journal of Materials Processing Technology, January 1997, Elsevier

    Professor Shahjahan Mridha

  49. Composite layer formation on Ti–6Al–4V surfaces by laser treatment using prepiaced SiC powder

    Article • Surface Engineering, January 1997, Taylor & Francis

    Professor Shahjahan Mridha

  50. Metal matrix composite layers formed by laser processing of commercial purity Ti–SiCpin nitrogen environment

    Article • Materials Science and Technology, July 1996, Taylor & Francis

    Professor Shahjahan Mridha

  51. The effect of laser surface nitriding with a spinning laser beam on the wear resistance of commercial purity titanium

    Article • Journal of Materials Science, January 1996, Springer Science + Business Media

    Professor Shahjahan Mridha

  52. Influence of melting environments on the microstructure and properties of the MMC layer formed on CPTI surfaces through laser treatment

    Article • January 1995, Elsevier

    Professor Shahjahan Mridha

  53. Crack-free hard surfaces produced by laser nitriding of commercial purity titanium

    Article • Materials Science and Engineering A, November 1994, Elsevier

    Professor Shahjahan Mridha

  54. Design of surfacein situmetal–ceramic composite formation via laser treatment

    Article • Materials Science and Technology, June 1994, Taylor & Francis

    Professor Shahjahan Mridha

  55. Characteristic features of laser-nitrided surfaces of two titanium alloys

    Article • Materials Science and Engineering A, August 1991, Elsevier

    Professor Shahjahan Mridha

  56. Characterization of nitrided 3% chromium steel

    Article • Metal Science, August 1982, Maney Publishing

    Professor Shahjahan Mridha

  57. Etching techniques for nitrided irons and steels

    Article • Metallography, May 1982, Elsevier

    Professor Shahjahan Mridha

  58. Growth morphology of electroplated copper: effect of seed material and current density

    Article • Institute of Electrical & Electronics Engineers (IEEE)

    Professor Shahjahan Mridha