All Stories

  1. Sunlight-Induced Photocatalytic Removal of Paracetamol Using Au-TiO2 Nanoparticles
  2. Expanding the Applicability of Electroactive Polymers for Tissue Engineering Through Surface Biofunctionalization
  3. Fully Printed 3D‐Thermoformed Electroluminescent Capacitive System for Human–Machine Interface Applications
  4. Environmentally Friendly Photoluminescent Coatings for Corrosion Sensing
  5. Wireless Stimulation of Barium Titanate@PEDOT Nanoparticles Toward Bioelectrical Modulation in Cancer
  6. Improving Thermal Regulation of Lithium-Ion Batteries by Poly(vinylidene fluoride-co-hexafluoropropylene) Composite Separator Membranes with Phase Change Materials
  7. Insights into the electroactive impact of magnetic nanostructures in PVDF composites via small-angle neutron scattering
  8. Separator membranes for aqueous zinc–manganese oxide batteries: a comprehensive review on experimental results and theoretical simulations
  9. Assessing of Biowaste Whey Protein as Films for Biodegradable Electronics and Packaging Applications
  10. Photocurable Polyurethane Acrylated Composites with Ionic Liquid-Laden Metal–Organic Framework for Energy Storage and Electronic Applications
  11. Metal-Organic Framework Functionalized Chitosan/Pectin Membranes for Solar-Driven Photo-Oxidation and Adsorption of Arsenic
  12. Biodegradable Natural Hydrogels for Tissue Engineering, Controlled Release, and Soil Remediation
  13. Multi‐Structural and Biodegradable Humidity Sensors with Enhanced Surface Hydrophilicity
  14. Stretchable Conductive Inks with Carbon‐Based Fillers for Conformable Printed Electronics
  15. AC/DC Magnetic Field Sensing Based on a Piezoelectric Polymer and a Fully Printed Planar Spiral Coil
  16. Cu2+–Assisted Synthesis of Ultrasharp and Sub-10 nm Gold Nanostars. Applications in Catalysis, Sensing, and Photothermia
  17. Correlation between the electrical and thermal conductivity of acrylonitrile butadiene styrene composites with carbonaceous fillers with different dimensionality
  18. Printed Memristors: An Overview of Ink, Materials, Deposition Techniques, and Applications
  19. Enhanced Electrochemiluminescence at the Gas/Liquid Interface of Bubbles Propelled into Solution
  20. Inkjet-Printed Bio-Based Melanin Composite Humidity Sensor for Sustainable Electronics
  21. Towards Sustainable Temperature Sensor Production through CO2-Derived Polycarbonate-Based Composites
  22. Sustainable Lignin-Reinforced Chitosan Membranes for Efficient Cr(VI) Water Remediation
  23. Correction: Mirandona-Olaeta et al. Ionic Liquid-Laden Zn-MOF-74-Based Solid-State Electrolyte for Sodium Batteries. Batteries 2023, 9, 588
  24. Improving Definition of Screen-Printed Functional Materials for Sensing Application
  25. Inkjet printed IGZO memristors with volatile and non-volatile switching
  26. Strategies for Improving Sustainability in the Development of High-Performance Styrenic Block Copolymers by Developing Blends with Cellulose Derivatives
  27. A 3D-Printed Portable UV and Visible Photoreactor for Water Purification and Disinfection Experiments
  28. Materials and Strategies to Enhance Melt Electrowriting Potential
  29. Holistic Characterization of MgO-Al2O3, MgO-CaZrO3, and Y2O3-ZrO2 Ceramic Composites for Aerospace Propulsion Systems
  30. Recent progress in ultra-thin solid polymeric electrolytes for next-generation lithium batteries
  31. Nitrogen oxide remediation through metal–organic frameworks with bi-functional absorption and photocatalytic characteristics
  32. Lipid Microfluidic Biomimetic Models for Drug Screening: A Comprehensive Review
  33. A composite proton exchange membrane with a three-dimensionally-reinforced hydrogen bonding network for durable hydrogen fuel cells
  34. Graphene-Enhanced Methacrylated Alginate Gel Films for Sustainable Dye Removal in Water Purification
  35. Ionic Liquid-Laden Zn-MOF-74-Based Solid-State Electrolyte for Sodium Batteries
  36. Poly(3-hydroxybutyrate-co-3-hydroxyvalerate) Blends with Poly(caprolactone) and Poly(lactic acid): A Comparative Study
  37. Cryo-Electrohydrodynamic Jetting of Aqueous Silk Fibroin Solutions
  38. Agar-Based Solid Polymer Electrolyte-Containing Ionic Liquid for Sustainable Electrochromic Devices
  39. Solid polymer electrolytes based on a high dielectric polymer and ionic liquids for lithium batteries
  40. Effect of fluorinated polymer matrix type in the performance of solid polymer electrolytes based on ionic liquids for solid-state lithium-ion batteries
  41. Sustainable Bio-Based Epoxy Resins with Tunable Thermal and Mechanic Properties and Superior Anti-Corrosion Performance
  42. Enhancement and Tunability of Plasmonic-Magnetic Hyperthermia through Shape and Size Control of Au:Fe3O4 Janus Nanoparticles
  43. Natural Indigenous Paper Substrates for Colorimetric Bioassays in Portable Analytical Systems: Sustainable Solutions from the Rain Forests to the Great Plains
  44. Magneto-mechanically induced antimicrobial properties of cone-like shaped surfaces
  45. Sustainable Collagen Composites with Graphene Oxide for Bending Resistive Sensing
  46. Retraction to “Silver-Doped Cadmium Selenide/Graphene Oxide-Filled Cellulose Acetate Nanocomposites for Photocatalytic Degradation of Malachite Green toward Wastewater Treatment”
  47. Photocurable Hybrid Materials with High Magnetodielectric Coupling
  48. Multifunctional Magnetoelectric Sensing and Bending Actuator Response of Polymer-Based Hybrid Materials with Magnetic Ionic Liquids
  49. Ternary Multifunctional Composites with Magnetorheological Actuation and Piezoresistive Sensing Response
  50. High Performance Ternary Solid Polymer Electrolytes Based on High Dielectric Poly(vinylidene fluoride) Copolymers for Solid State Lithium-Ion Batteries
  51. Towards All-Non-Vacuum-Processed Photovoltaic Systems: A Water-Based Screen-Printed Cu(In,Ga)Se2 Photoabsorber with a 6.6% Efficiency
  52. Ultrahigh thermal stability of dielectric permittivity in 0.6Bi(Mg1/2Ti1/2)O3–0.4Ba0.8Ca0.2(Ti0.875Nb0.125)O3
  53. Influence of the Inclusion of Propylene Carbonate Electrolyte Solvent on the Microstructure and Thermal and Mechanical Stability of Poly(l-lactic acid) and Poly(vinylidene fluoride-co-hexafluoropropylene) Battery Separator Membranes
  54. Magnetic Polymer Actuators with Self-Sensing Resistive Bending Response Based on Ternary Polymer Composites
  55. Thermochromic Responses on Melt Electrowritten Poly(ϵ-caprolactone) Microstructures
  56. High-Performance Sustainable Electrochromic Devices Based on Carrageenan Solid Polymer Electrolytes with Ionic Liquid
  57. Influence of Solvent Evaporation Temperature on the Performance of Ternary Solid Polymer Electrolytes Based on Poly(vinylidene fluoride-co-hexafluoropropylene) Combining an Ionic Liquid and a Zeolite
  58. Long-lasting ceramic composites for surface dielectric barrier discharge plasma actuators
  59. Magnetically Responsive Melt Electrowritten Structures
  60. Graphene Based Printable Conductive Wax for Low‐Power Thermal Actuation in Microfluidic Paper‐Based Analytical Devices
  61. Sustainable Collagen Blends with Different Ionic Liquids for Resistive Touch Sensing Applications
  62. Recent Advances on cell Culture Platforms for in vitro Drug Screening and Cell Therapies: From Conventional to Microfluidic Strategies
  63. Wastewater Treatment of Real Effluents by Microfiltration Using Poly(vinylidene fluoride–hexafluoropropylene) Membranes
  64. Improving the Performance of Paper-Based Dipole Antennas by Electromagnetic Flux Concentration
  65. Advances in Printing and Electronics: From Engagement to Commitment
  66. Development of Silk Fibroin Scaffolds for Vascular Repair
  67. Acrylonitrile Butadiene Styrene-Based Composites with Permalloy with Tailored Magnetic Response
  68. A Novel Screen-Printed Textile Interface for High-Density Electromyography Recording
  69. A review on 2D-ZnO nanostructure based biosensors: from materials to devices
  70. Surface charge and dynamic mechanoelectrical stimuli improves adhesion, proliferation and differentiation of neuron-like cells
  71. Influence of polymer matrix on the luminescence of phosphor based printable electroluminescent materials and devices
  72. Ionic liquids in the scope of lithium-ion batteries: from current separator membranes to next generation sustainable solid polymer electrolytes
  73. Humidity Sensors Based on Magnetic Ionic Liquids Blended in Poly(vinylidene fluoride-co-hexafluoropropylene)
  74. 3D-printed carrageenan-based nanocomposites for sustainable resistive sensing devices
  75. Flexible multifunctional hard coatings based on chromium oxynitride for pressure-sensing applications
  76. Enhancement of Magnetic Surface-Enhanced Raman Scattering Detection by Tailoring Fe3O4@Au Nanorod Shell Thickness and Its Application in the On-site Detection of Antibiotics in Water
  77. Piezoelectric and Magnetically Responsive Biodegradable Composites with Tailored Porous Morphology for Biotechnological Applications
  78. Size Effect in Hybrid TiO2:Au Nanostars for Photocatalytic Water Remediation Applications
  79. Influence of rGO on the Crystallization Kinetics, Cytoxicity, and Electrical and Mechanical Properties of Poly (L-lactide-co-ε-caprolactone) Scaffolds
  80. Magnetically Activated Piezoelectric 3D Platform Based on Poly(Vinylidene) Fluoride Microspheres for Osteogenic Differentiation of Mesenchymal Stem Cells
  81. Ionic Liquids as Biocompatible Antibacterial Agents: A Case Study on Structure-Related Bioactivity on Escherichia coli
  82. Stability of Biomimetically Functionalised Alginate Microspheres as 3D Support in Cell Cultures
  83. Electrospun Magnetic Ionic Liquid Based Electroactive Materials for Tissue Engineering Applications
  84. Fiber-Reinforced Polyester Composites with Photoluminescence Sensing Capabilities for UV Degradation Monitoring
  85. Solar Photocatalytic Membranes: An Experimental and Artificial Neural Network Modeling Approach for Niflumic Acid Degradation
  86. Dynamic and Self-Healable Chitosan/Hyaluronic Acid-Based In Situ-Forming Hydrogels
  87. Microfluidic Processing of Piezoelectric and Magnetic Responsive Electroactive Microspheres
  88. Multifunctional Ternary Composites with Silver Nanowires and Titanium Dioxide Nanoparticles for Capacitive Sensing and Photocatalytic Self-Cleaning Applications
  89. Flexible 3D Printed Acrylic Composites based on Polyaniline/Multiwalled Carbon Nanotubes for Piezoresistive Pressure Sensors
  90. Lithium-Ion Battery Solid Electrolytes Based on Poly(vinylidene Fluoride)–Metal Thiocyanate Ionic Liquid Blends
  91. Carrageenan-Based Hybrid Materials with Ionic Liquids for Sustainable and Recyclable Printable Pressure Sensors
  92. Understanding Myoblast Differentiation Pathways When Cultured on Electroactive Scaffolds through Proteomic Analysis
  93. Solid Magnetoliposomes as Multi-Stimuli-Responsive Systems for Controlled Release of Doxorubicin: Assessment of Lipid Formulations
  94. Correction to “Silver-Doped Cadmium Selenide/Graphene Oxide-Filled Cellulose Acetate Nanocomposites for Photocatalytic Degradation of Malachite Green toward Wastewater Treatment”
  95. Toward Sustainable Solid Polymer Electrolytes for Lithium-Ion Batteries
  96. Multifunctional Touch Sensing and Antibacterial Polymer‐Based Core‐Shell Metallic Nanowire Composites for High Traffic Surfaces
  97. Silk Fibroin Nanocomposites with Indium Tin Oxide toward Sustainable Capacitive Touch Sensing Applications
  98. Solid Polymer Electrolytes Based on Gellan Gum and Ionic Liquid for Sustainable Electrochromic Devices
  99. Greener Solvent-Based Processing of Magnetoelectric Nanocomposites
  100. Recent Progress in Graphene- and Related Carbon-Nanomaterial-based Electrochemical Biosensors for Early Disease Detection
  101. Flexible TiCux Thin Films with Dual Antimicrobial and Piezoresistive Characteristics
  102. pH-Induced 3D Printable Chitosan Hydrogels for Soft Actuation
  103. Core–Shell Fe3O4@Au Nanorod-Loaded Gels for Tunable and Anisotropic Magneto- and Photothermia
  104. Silver Nanoparticles for Conductive Inks: From Synthesis and Ink Formulation to Their Use in Printing Technologies
  105. Tuning magnetic response and ionic conductivity of electrospun hybrid membranes for tissue regeneration strategies
  106. Environmentally friendly carrageenan-based ionic-liquid driven soft actuators
  107. Nanocomposites Materials and Their Applications: Current and Future Trends
  108. Nanocomposites for Energy Storage Applications
  109. Ionic liquid-based electroactive materials: a novel approach for cardiac tissue engineering strategies
  110. Origin of the ultra-wide temperature dielectric stability and dynamic behavior of nanoregions in 0.6Bi(Mg0.5Ti0.5)O3–0.4Ba0.8Ca0.2(Ti0.875Zr0.125)O3
  111. Improved performance of polyimide Cirlex‐based dielectric barrier discharge plasma actuators for flow control
  112. Kit “Energy, Environment and Sustainability”: An Educational Strategy for a Sustainable Future. A Case Study for Guinea-Bissau
  113. Laser-activated screen-printed carbon electrodes for enhanced dopamine determination in the presence of ascorbic and uric acid
  114. Biomimetic 3D Environment Based on Microgels as a Model for the Generation of Drug Resistance in Multiple Myeloma
  115. Effect of Polymer Dissolution Temperature and Conditioning Time on the Morphological and Physicochemical Characteristics of Poly(Vinylidene Fluoride) Membranes Prepared by Non-Solvent Induced Phase Separation
  116. Smart and Functional Materials for Lithium-Ion Battery
  117. Reusable Ag@TiO2-Based Photocatalytic Nanocomposite Membranes for Solar Degradation of Contaminants of Emerging Concern
  118. Luminescent Poly(vinylidene fluoride)‐Based Inks for Anticounterfeiting Applications
  119. Unraveling the role of magnetic anisotropy on the thermoelectric response: a theoretical and experimental approach
  120. Ionic Liquid-Based Materials for Biomedical Applications
  121. Electroactive Smart Materials for Neural Tissue Regeneration
  122. Eco-friendly and cost-efficient inks for screen-printed fabrication of copper indium gallium diselenide photoabsorber thin films
  123. Environmentally Friendly Graphene‐Based Conductive Inks for Multitouch Capacitive Sensing Surfaces
  124. Patterned separator membranes with pillar surface microstructures for improved battery performance
  125. High-dielectric mouldable and printable wax reinforced with ceramic nanofillers and its suitability for capacitive sensing
  126. Polycarbonate based multifunctional self-sensing 2D and 3D printed structures for aeronautic applications
  127. A Facile Nanoimpregnation Method for Preparing Paper‐Based Sensors and Actuators
  128. Photocurable magnetic materials with tailored functional properties
  129. Magnetorheological Elastomer‐Based Materials and Devices: State of the Art and Future Perspectives
  130. Recent Advances on Materials for Lithium-Ion Batteries
  131. Magnetorheological Elastomer Based Materials and Devices: State of the Art and Future Perspectives
  132. Large-Scale Synthesis of Semiconducting Cu(In,Ga)Se2 Nanoparticles for Screen Printing Application
  133. Fluorinated Polymer Membranes as Advanced Substrates for Portable Analytical Systems and Their Proof of Concept for Colorimetric Bioassays
  134. Modulation of the Bifunctional CrVI to CrIII Photoreduction and Adsorption Capacity in ZrIV and TiIV Benchmark Metal-Organic Frameworks
  135. Influence of cellulose nanocrystal surface functionalization on the bending response of cellulose nanocrystal/ionic liquid soft actuators
  136. Laser-induced highly oriented pyrolytic graphite for high-performance screen-printed electrodes
  137. Magnetic materials: a journey from finding north to an exciting printed future
  138. Metal–organic frameworks and zeolite materials as active fillers for lithium-ion battery solid polymer electrolytes
  139. Large-scale aqueous synthesis of Cu(In,Ga)Se2 nanoparticles for photocatalytic degradation of ciprofloxacin
  140. Biodegradable Hydrogels Loaded with Magnetically Responsive Microspheres as 2D and 3D Scaffolds
  141. Patterned Piezoelectric Scaffolds for Osteogenic Differentiation
  142. Triboelectric Energy Harvesting Response of Different Polymer-Based Materials
  143. Erratum: Development of Poly(l-Lactic Acid)-Based Bending Actuators. Polymers 2020, 12, 1187
  144. Polysaccharide-Based In Situ Self-Healing Hydrogels for Tissue Engineering Applications
  145. Magnetoelectrics: Three Centuries of Research Heading Towards the 4.0 Industrial Revolution
  146. Polymers for advanced lithium-ion batteries: State of the art and future needs on polymers for the different battery components
  147. Effect of bacterial nanocellulose binding on the bactericidal activity of bovine lactoferrin
  148. Magnetic Response Dependence of ZnO Based Thin Films on Ag Doping and Processing Architecture
  149. Magnetic Bioreactor for Magneto-, Mechano- and Electroactive Tissue Engineering Strategies
  150. Development of Poly(l-Lactic Acid)-Based Bending Actuators
  151. Cellulose Nanocrystal and Water-Soluble Cellulose Derivative Based Electromechanical Bending Actuators
  152. Plasma-treated Bombyx mori cocoon separators for high-performance and sustainable lithium ion batteries
  153. Morphology Dependence Degradation of Electro- and Magnetoactive Poly(3-hydroxybutyrate-co-hydroxyvalerate) for Tissue Engineering Applications
  154. Magnetic Proximity Sensor Based on Magnetoelectric Composites and Printed Coils
  155. Ionic Liquid-Polymer Composites: A New Platform for Multifunctional Applications
  156. Fabrication, Characterization and Implementation of Thermo Resistive TiCu(N,O) Thin Films in a Polymer Injection Mold
  157. Tailoring Electrical and Mechanical Properties of All-Natural Polymer Composites for Environmentally Friendlier Electronics
  158. The role of CNC surface modification on the structural, thermal and electrical properties of poly(vinylidene fluoride) nanocomposites
  159. Enhanced Photocatalytic Activity of Au/TiO2 Nanoparticles against Ciprofloxacin
  160. Electroactive γ-Phase, Enhanced Thermal and Mechanical Properties and High Ionic Conductivity Response of Poly (Vinylidene Fluoride)/Cellulose Nanocrystal Hybrid Nanocomposites
  161. Reconfigurable 3D-printable magnets with improved maximum energy product
  162. Polymer-based actuators: back to the future
  163. Polymer-Based Membranes for Oily Wastewater Remediation
  164. Multilayer passive radiative selective cooling coating based on Al/SiO2/SiNx/SiO2/TiO2/SiO2 prepared by dc magnetron sputtering
  165. Electromechanical Properties of PVDF-Based Polymers Reinforced with Nanocarbonaceous Fillers for Pressure Sensing Applications
  166. Overview on thermoactive materials, simulations and applications
  167. High performance piezoresistive response of nanostructured ZnO/Ag thin films for pressure sensing applications
  168. Transparent Magnetoelectric Materials for Advanced Invisible Electronic Applications
  169. Carbonaceous Filler Type and Content Dependence of the Physical-Chemical and Electromechanical Properties of Thermoplastic Elastomer Polymer Composites
  170. Mesoporous poly(vinylidene fluoride-co-trifluoroethylene) membranes for lithium-ion battery separators
  171. Surface wettability modification of poly(vinylidene fluoride) and copolymer films and membranes by plasma treatment
  172. Theoretical simulation of the optimal relation between active material, binder and conductive additive for lithium-ion battery cathodes
  173. Development of bio-hybrid piezoresistive nanocomposites using silk-elastin protein copolymers
  174. Recent developments on printed photodetectors for large area and flexible applications
  175. Improved response of ionic liquid-based bending actuators by tailored interaction with the polar fluorinated polymer matrix
  176. Nanostructured Ti1-xCux thin films with tailored electrical and morphological anisotropy
  177. State-of-the-Art and Future Challenges of UV Curable Polymer-Based Smart Materials for Printing Technologies
  178. All-printed multilayer materials with improved magnetoelectric response
  179. Optimized silk fibroin piezoresistive nanocomposites for pressure sensing applications based on natural polymers
  180. Multifunctional Platform Based on Electroactive Polymers and Silica Nanoparticles for Tissue Engineering Applications
  181. Electroactive biomaterial surface engineering effects on muscle cells differentiation
  182. Multifunctional magnetically responsive biocomposites based on genetically engineered silk-elastin-like protein
  183. Piezoresistive polymer blends for electromechanical sensor applications
  184. Binary polyamide hybrid composites containing carbon allotropes and metal particles with radiofrequency shielding effect
  185. Highly efficient removal of fluoride from aqueous media through polymer composite membranes
  186. Silica/poly(vinylidene fluoride) porous composite membranes for lithium-ion battery separators
  187. Development of Magnetically Active Scaffolds for Bone Regeneration
  188. Water based scintillator ink for printed X-ray radiation detectors
  189. Improving Magnetoelectric Contactless Sensing and Actuation through Anisotropic Nanostructures
  190. Tailored Biodegradable and Electroactive Poly(Hydroxybutyrate-Co-Hydroxyvalerate) Based Morphologies for Tissue Engineering Applications
  191. Recent Advances in Poly(vinylidene fluoride) and Its Copolymers for Lithium-Ion Battery Separators
  192. TiO 2 /graphene and TiO 2 /graphene oxide nanocomposites for photocatalytic applications: A computer modeling and experimental study
  193. Nano-sculptured Janus-like TiAg thin films obliquely deposited by GLAD co-sputtering for temperature sensing
  194. Layer-by-layer fabrication of highly transparent polymer based piezoelectric transducers
  195. Poly(vinylidene fluoride) composites with carbon nanotubes decorated with metal nanoparticles
  196. A new approach for preparation of metal-containing polyamide/carbon textile laminate composites with tunable electrical conductivity
  197. Development of a contactless DC current sensor with high linearity and sensitivity based on the magnetoelectric effect
  198. Evaluation of the Physicochemical Properties and Active Response of Piezoelectric Poly(vinylidene fluoride-co-trifluoroethylene) as a Function of Its Microstructure
  199. Ionic and conformational mobility in poly(vinylidene fluoride)/ionic liquid blends: Dielectric and electrical conductivity behavior
  200. Polymer-based smart materials by printing technologies: Improving application and integration
  201. Silk fibroin-magnetic hybrid composite electrospun fibers for tissue engineering applications
  202. Tuning electrical resistivity anisotropy of ZnO thin films for resistive sensor applications
  203. Computer simulation of the influence of thermal conditions on the performance of conventional and unconventional lithium-ion battery geometries
  204. Improved electrochemical performance of rare earth doped LiMn1.5-xNi0.5RExO4 based composite cathodes for lithium-ion batteries
  205. Relation between fiber orientation and mechanical properties of nano-engineered poly(vinylidene fluoride) electrospun composite fiber mats
  206. Indirect X-ray Detectors Based on Inkjet-Printed Photodetectors with a Screen-Printed Scintillator Layer
  207. Electroactive poly(vinylidene fluoride)-based structures for advanced applications
  208. Piezoresistive response of extruded polyaniline/(styrene-butadiene-styrene) polymer blends for force and deformation sensors
  209. Printed Wheatstone bridge with embedded polymer based piezoresistive sensors for strain sensing applications
  210. Reusable Photocatalytic Optical Fibers for Underground, Deep-Sea, and Turbid Water Remediation
  211. Piezo- and Magnetoelectric Polymers as Biomaterials for Novel Tissue Engineering Strategies
  212. Fluorinated Polymers as Smart Materials for Advanced Biomedical Applications
  213. Silk Fibroin Separators: A Step Toward Lithium-Ion Batteries with Enhanced Sustainability
  214. Highly effective clean-up of magnetic nanoparticles using microfluidic technology
  215. Photocatalytic reusable membranes for the effective degradation of tartrazine with a solar photoreactor
  216. Theoretical design of high-performance polymer-based magnetoelectric of fibrilar structures
  217. Optimized Magnetodielectric Coupling on High-Temperature Polymer-Based Nanocomposites
  218. Low-field giant magneto-ionic response in polymer-based nanocomposites
  219. Design and fabrication of multilayer inkjet-printed passive components for printed electronics circuit development
  220. Magnetoelectric coupling in nanoscale 0–1 connectivity
  221. Multifunctional electromechanical and thermoelectric polyaniline–poly(vinyl acetate) latex composites for wearable devices
  222. On the use of surfactants for improving nanofiller dispersion and piezoresistive response in stretchable polymer composites
  223. Stretchable scintillator composites for indirect X-ray detectors
  224. Advances in Magnetic Nanoparticles for Biomedical Applications
  225. Crystallization kinetics of poly(ethylene oxide) confined in semicrystalline poly(vinylidene) fluoride
  226. High-performance graphene-based carbon nanofiller/polymer composites for piezoresistive sensor applications
  227. In vivo demonstration of the suitability of piezoelectric stimuli for bone reparation
  228. Marked Object Recognition Multitouch Screen Printed Touchpad for Interactive Applications
  229. On the Relevance of the Polar β-Phase of Poly(vinylidene fluoride) for High Performance Lithium-Ion Battery Separators
  230. Human Mesenchymal Stem Cells Growth and Osteogenic Differentiation on Piezoelectric Poly(vinylidene fluoride) Microsphere Substrates
  231. Magnetic cellulose nanocrystal nanocomposites for the development of green functional materials
  232. Chitosan patterning on titanium implants
  233. Comparative study of surface properties determination of colored pearl-oyster-shell-derived filler using inverse gas chromatography method and contact angle measurements
  234. Influence of the sputtering pressure on the morphological features and electrical resistivity anisotropy of nanostructured titanium films
  235. Capture and separation of l-histidine through optimized zinc-decorated magnetic silica spheres
  236. Surface free energy and mechanical performance of LDPE/CBF composites containing toxic-metal free filler
  237. Crystal Morphology Control of Synthetic Giniite by Alkaline Cations and pH Variations
  238. Temperature and frequency dependence of the dielectric and piezoelectric response of P(VDF–TrFE)/CoFe2O4 magnetoelectric composites
  239. Membranes based on polymer miscibility for selective transport and separation of metallic ions
  240. Photocatalytic degradation of recalcitrant micropollutants by reusable Fe 3 O 4 /SiO 2 /TiO 2 particles
  241. The Influence of Copolymer Composition on PLGA/nHA Scaffolds’ Cytotoxicity and In Vitro Degradation
  242. Preparation of Poly(vinylidene fluoride) Lithium-Ion Battery Separators and Their Compatibilization with Ionic Liquid - A Green Solvent Approach
  243. Kinetic study of thermal degradation of chitosan as a function of deacetylation degree
  244. Evaluation and optimization of the magnetoelectric response of CoFe 2 O 4 /poly(vinylidene fluoride) composite spheres by computer simulation
  245. Magnetoelectric response on Terfenol-D/ P(VDF-TrFE) two-phase composites
  246. Mild hydrothermal synthesis and crystal morphology control of LiFePO4 by lithium nitrate
  247. Cellulose-based magnetoelectric composites
  248. Fabrication and Characterization of High-Performance Polymer-Based Magnetoelectric DC Magnetic Field Sensors Devices
  249. Metallic Glass/PVDF Magnetoelectric Laminates for Resonant Sensors and Actuators: A Review
  250. Piezoresistive Polymer-Based Materials for Real-Time Assessment of the Stump/Socket Interface Pressure in Lower Limb Amputees
  251. Development of water-based printable piezoresistive sensors for large strain applications
  252. Wide-Range Magnetoelectric Response on Hybrid Polymer Composites Based on Filler Type and Content
  253. Nanodiamonds/poly(vinylidene fluoride) composites for tissue engineering applications
  254. Synthesis and improved electrochemical performance of LiMn2–xGdxO4 based cathodes
  255. Local probing of magnetoelectric properties of PVDF/Fe3O4 electrospun nanofibers by piezoresponse force microscopy
  256. Cyclic temperature dependence of electrical conductivity in polyanilines as a function of the dopant and synthesis method
  257. Metamorphic biomaterials
  258. Thermal analysis of lithium-ion batteries with square frame geometries by theoretical simulations
  259. Relationship between nano-architectured Ti1−x Cu x thin film and electrical resistivity for resistance temperature detectors
  260. Effect of anion type in the performance of ionic liquid/poly(vinylidene fluoride) electromechanical actuators
  261. High performance screen-printed electrodes prepared by a green solvent approach for lithium-ion batteries
  262. Imidazolium-based ionic liquid type dependence of the bending response of polymer actuators
  263. Magnetically Controlled Drug Release System through Magnetomechanical Actuation
  264. All-inkjet-printed low-pass filters with adjustable cutoff frequency consisting of resistors, inductors and transistors for sensor applications
  265. Computer simulation evaluation of the geometrical parameters affecting the performance of two dimensional interdigitated batteries
  266. Influence of fluoropolymer binders on the electrochemical performance of C-LiFePO 4 based cathodes
  267. Synthesis of highly magnetostrictive nanostructures and their application in a polymer-based magnetoelectric sensing device
  268. Reusability of photocatalytic TiO2 and ZnO nanoparticles immobilized in poly(vinylidene difluoride)-co-trifluoroethylene
  269. Effect of cyano dipolar groups on the performance of lithium-ion battery electrospun polyimide gel electrolyte membranes
  270. Improved magnetodielectric coefficient on polymer based composites through enhanced indirect magnetoelectric coupling
  271. Finite-Size Effects in the Absorption Spectra of a Single-Wall Carbon Nanotube
  272. Preparation and properties of metal-containing polyamide hybrid composites via reactive microencapsulation
  273. Study on the surface properties of colored talc filler (CTF) and mechanical performance of CTF/acrylonitrile-butadiene-styrene composite
  274. Piezoresistive response of nano-architectured TixCuy thin films for sensor applications
  275. A green solvent strategy for the development of piezoelectric poly(vinylidene fluoride–trifluoroethylene) films for sensors and actuators applications
  276. Poly(vinylidene fluoride-hexafluoropropylene)/bayerite composite membranes for efficient arsenic removal from water
  277. Electromechanical actuators based on poly(vinylidene fluoride) with [N1 1 1 2(OH)][NTf2] and [C2mim] [C2SO4]
  278. Electronic optimization for an energy harvesting system based on magnetoelectric Metglas/poly(vinylidene fluoride)/Metglas composites
  279. Comparative study of sol–gel methods for the facile synthesis of tailored magnetic silica spheres
  280. Green solvent approach for printable large deformation thermoplastic elastomer based piezoresistive sensors and their suitability for biomedical applications
  281. Piezoresistive response of spray-printed carbon nanotube/poly(vinylidene fluoride) composites
  282. Optimization of filler type within poly(vinylidene fluoride-co-trifluoroethylene) composite separator membranes for improved lithium-ion battery performance
  283. Bacterial cellulose-lactoferrin as an antimicrobial edible packaging
  284. From superhydrophobic- to superhydrophilic-patterned poly(vinylidene fluoride-co -chlorotrifluoroethylene) architectures as a novel platform for biotechnological applications
  285. Giant Electric-Field-Induced Strain in PVDF-Based Battery Separator Membranes Probed by Electrochemical Strain Microscopy
  286. Processing and size range separation of pristine and magnetic poly(L-lactic acid) based microspheres for biomedical applications
  287. Strong increase of the dielectric response of carbon nanotube/poly(vinylidene fluoride) composites induced by carbon nanotube type and pre-treatment
  288. Superhydrophilic poly(l-lactic acid) electrospun membranes for biomedical applications obtained by argon and oxygen plasma treatment
  289. TiO2/graphene oxide immobilized in P(VDF-TrFE) electrospun membranes with enhanced visible-light-induced photocatalytic performance
  290. Optimized anisotropic magnetoelectric response of Fe61.6Co16.4Si10.8B11.2/PVDF/Fe61.6Co16.4Si10.8B11.2laminates for AC/DC magnetic field sensing
  291. Increasing X-ray to visible transduction performance of Gd2O3:Eu3+PVDF composites by PPO/POPOP addition
  292. Proving the suitability of magnetoelectric stimuli for tissue engineering applications
  293. Strain analysis on Ti1−xAgx and Ag–TiNx electrodes deposited on polymer based sensors
  294. High performance screen printable lithium-ion battery cathode ink based on C-LiFePO4
  295. Differentiation of mesenchymal stem cells for cartilage tissue engineering: Individual and synergetic effects of three-dimensional environment and mechanical loading
  296. Computer simulations of the influence of geometry in the performance of conventional and unconventional lithium-ion batteries
  297. Acetylated bacterial cellulose coated with urinary bladder matrix as a substrate for retinal pigment epithelium
  298. MC3T3-E1 Cell Response to Ti 1– x Ag x and Ag-TiN x Electrodes Deposited on Piezoelectric Poly(vinylidene fluoride) Substrates for Sensor Applications
  299. Strategies for the development of three dimensional scaffolds from piezoelectric poly(vinylidene fluoride)
  300. Characterization of Metglas/poly(vinylidene fluoride)/Metglas magnetoelectric laminates for AC/DC magnetic sensor applications
  301. Development of poly(vinylidene fluoride)/ionic liquid electrospun fibers for tissue engineering applications
  302. Comparative efficiency of TiO2 nanoparticles in suspension vs. immobilization into P(VDF–TrFE) porous membranes
  303. Ciprofloxacin wastewater treated by UVA photocatalysis: contribution of irradiated TiO2and ZnO nanoparticles on the final toxicity as assessed by Vibrio fischeri
  304. Evaluation and optimization of the performance of frame geometries for lithium-ion battery application by computer simulation
  305. Improved performance of rare earth doped LiMn2O4cathodes for lithium-ion battery applications
  306. Synthesis and size dependent magnetostrictive response of ferrite nanoparticles and their application in magnetoelectric polymer-based multiferroic sensors
  307. Understanding nucleation of the electroactive β-phase of poly(vinylidene fluoride) by nanostructures
  308. Influence of Solvent Evaporation Rate in the Preparation of Carbon-Coated Lithium Iron Phosphate Cathode Films on Battery Performance
  309. Correction to Bacterial Cellulose As a Support for the Growth of Retinal Pigment Epithelium
  310. Piezoelectric polymers as biomaterials for tissue engineering applications
  311. Reactive microencapsulation of carbon allotropes in polyamide shell-core structures and their transformation in hybrid composites with tailored electrical properties
  312. State of the art and open questions on cathode preparation based on carbon coated lithium iron phosphate
  313. Novel hybrid multifunctional magnetoelectric porous composite films
  314. Nonsolvent induced phase separation preparation of poly(vinylidene fluoride-co-chlorotrifluoroethylene) membranes with tailored morphology, piezoelectric phase content and mechanical properties
  315. High performance electromechanical actuators based on ionic liquid/poly(vinylidene fluoride)
  316. Hydrophobic/hydrophilic P(VDF-TrFE)/PHEA polymer blend membranes
  317. Antibacterial performance of bovine lactoferrin-fish gelatine electrospun membranes
  318. Effect of the degree of porosity on the performance of poly(vinylidene fluoride-trifluoroethylene)/poly(ethylene oxide) blend membranes for lithium-ion battery separators
  319. Structural, mechanical and piezoelectric properties of polycrystalline AlN films sputtered on titanium bottom electrodes
  320. Induced Magnetoelectric Effect Driven by Magnetization in BaFe12O19- P(VDF-TrFE) Composites
  321. Modeling separator membranes physical characteristics for optimized lithium ion battery performance
  322. Effect of ionic liquid anion and cation on the physico-chemical properties of poly(vinylidene fluoride)/ionic liquid blends
  323. Ag-TiNx electrodes deposited on piezoelectric poly(vinylidene fluoride) for biomedical sensor applications
  324. Advances and Future Challenges in Printed Batteries
  325. Corrigendum to “Influence of oxygen plasma treatment parameters on poly(vinylidene fluoride) electrospun fiber mats wettability” [Prog. Org. Coat. 85 (2015) 151–158]
  326. Phase morphology and crystallinity of poly(vinylidene fluoride)/poly(ethylene oxide) piezoelectric blend membranes
  327. Poly(vinylidene fluoride-trifluoroethylene) Porous Films: Tailoring Microstructure and Physical Properties by Solvent Casting Strategies
  328. One-Step In Situ Synthesis of Polyamide Microcapsules With Inorganic Payload and Their Transformation into Responsive Thermoplastic Composite Materials
  329. Gd2O3:Eu3+/PPO/POPOP/PS composites for digital imaging radiation detectors
  330. Development of electrospun photocatalytic TiO2-polyamide-12 nanocomposites
  331. Synthesis, physical and magnetic properties of BaFe12O19/P(VDF-TrFE) multifunctional composites
  332. Influence of oxygen plasma treatment parameters on poly(vinylidene fluoride) electrospun fiber mats wettability
  333. Transformation of Escherichia coli JM109 using pUC19 by the Yoshida effect
  334. Exploring the Properties of Genetically Engineered Silk-Elastin-Like Protein Films
  335. Tailored Magnetic and Magnetoelectric Responses of Polymer-Based Composites
  336. Design and validation of a biomechanical bioreactor for cartilage tissue culture
  337. Poly(vinylidene fluoride) and copolymers as porous membranes for tissue engineering applications
  338. Degradation of all-inkjet-printed organic thin-film transistors with TIPS-pentacene under processes applied in textile manufacturing
  339. Dielectric relaxation and ferromagnetic resonance in magnetoelectric (Polyvinylidene-fluoride)/ferrite composites
  340. Novel Anisotropic Magnetoelectric Effect on δ-FeO(OH)/P(VDF-TrFE) Multiferroic Composites
  341. Connecting free volume with shape memory properties in noncytotoxic gamma-irradiated polycyclooctene
  342. Dielectric relaxation dynamics of high-temperature piezoelectric polyimide copolymers
  343. Energy harvesting device based on a metallic glass/PVDF magnetoelectric laminated composite
  344. Tailoring microstructure and physical properties of poly(vinylidene fluoride–hexafluoropropylene) porous films
  345. Towards “Green” Smart Materials for Force and Strain Sensors: The Case of Polyaniline
  346. Polymer composites and blends for battery separators: State of the art, challenges and future trends
  347. Metallic glass/PVDF magnetoelectric energy harvester working up to the radiofrequency range
  348. Induced magnetoelectric effect driven by magnetization in BaFe12O19/P(VDF-TrFE) composites
  349. Effect of the acoustic impedance in ultrasonic emitter transducers using digital modulations
  350. Bacterial Cellulose As a Support for the Growth of Retinal Pigment Epithelium
  351. Erratum to: Thermal–mechanical behaviour of chitosan–cellulose derivative thermoreversible hydrogel films
  352. Energy harvesting performance of BaTiO3/poly(vinylidene fluoride–trifluoroethylene) spin coated nanocomposites
  353. Effect of butadiene/styrene ratio, block structure and carbon nanotube content on the mechanical and electrical properties of thermoplastic elastomers after UV ageing
  354. Thermal–mechanical behaviour of chitosan–cellulose derivative thermoreversible hydrogel films
  355. Mechanical fatigue performance of PCL-chondroprogenitor constructs after cell culture under bioreactor mechanical stimulus
  356. Ion Exchange Dependent Electroactive Phase Content and Electrical Properties of Poly(vinylidene fluoride)/Na(M)Y Composites
  357. Tailoring poly(vinylidene fluoride-co -chlorotrifluoroethylene) microstructure and physicochemical properties by exploring its binary phase diagram with dimethylformamide
  358. Variation of the physicochemical and morphological characteristics of solvent casted poly(vinylidene fluoride) along its binary phase diagram with dimethylformamide
  359. Poly(vinylidene fluoride-trifluoroethylene)/NAY zeolite hybrid membranes as a drug release platform applied to ibuprofen release
  360. Size effects on the magnetoelectric response on PVDF/Vitrovac 4040 laminate composites
  361. Mechanical vs. electrical hysteresis of carbon nanotube/styrene–butadiene–styrene composites and their influence in the electromechanical response
  362. High-temperature polymer based magnetoelectric nanocomposites
  363. Lithium ion rechargeable batteries: State of the art and future needs of microscopic theoretical models and simulations
  364. Piezoelectric poly(vinylidene fluoride) microstructure and poling state in active tissue engineering
  365. Magnetoelectric CoFe2O4/polyvinylidene fluoride electrospun nanofibres
  366. Development of magnetoelectric CoFe2O4 /poly(vinylidene fluoride) microspheres
  367. Determination of the magnetostrictive response of nanoparticles via magnetoelectric measurements
  368. Poly(vinylidene fluoride-co-chlorotrifluoroethylene) (PVDF-CTFE) lithium-ion battery separator membranes prepared by phase inversion
  369. Effect of Ionic Liquid Anion Type in the Performance of Solid Polymer Electrolytes Based on Poly(Vinylidene fluoride‐trifluoroethylene)
  370. Electrospun styrene–butadiene–styrene elastomer copolymers for tissue engineering applications: Effect of butadiene/styrene ratio, block structure, hydrogenation and carbon nanotube loading on physical properties and cytotoxicity
  371. Physicochemical properties of poly(vinylidene fluoride-trifluoroethylene)/poly(ethylene oxide) blend membranes for lithium ion battery applications: Influence of poly(ethylene oxide) molecular weight
  372. Microstructural variations of poly(vinylidene fluoride co-hexafluoropropylene) and their influence on the thermal, dielectric and piezoelectric properties
  373. Development of high sensitive polyaniline based piezoresistive films by conventional and green chemistry approaches
  374. Piezoelectric actuators for acoustic mixing in microfluidic devices—Numerical prediction and experimental validation of heat and mass transport
  375. Nanostructured functional Ti–Ag electrodes for large deformation sensor applications
  376. Improving Photocatalytic Performance and Recyclability by Development of Er-Doped and Er/Pr-Codoped TiO2/Poly(vinylidene difluoride)–Trifluoroethylene Composite Membranes
  377. Dynamic piezoelectric stimulation enhances osteogenic differentiation of human adipose stem cells
  378. Surface roughness dependent osteoblast and fibroblast response on poly(l-lactide) films and electrospun membranes
  379. Electrical properties of intrinsically conductive core–shell polypyrrole/poly(vinylidene fluoride) electrospun fibers
  380. Corrigendum to “Effect of filler dispersion and dispersion method on the piezoelectric and magnetoelectric response of CoFe2O4/P(VDF-TrFE) nanocomposites” [Appl. Surf. Sci. (313) (2014) 215–219]
  381. Ti1−xAgx electrodes deposited on polymer based sensors
  382. Influence of the porosity degree of poly(vinylidene fluoride-co-hexafluoropropylene) separators in the performance of Li-ion batteries
  383. Gd2O3:Eu Nanoparticle-Based Poly(vinylidene fluoride) Composites for Indirect X-ray Detection
  384. Numerical prediction of acoustic streaming in a microcuvette
  385. In vitromechanical fatigue behavior of poly-ɛ-caprolactone macroporous scaffolds for cartilage tissue engineering: Influence of pore filling by a poly(vinyl alcohol) gel
  386. Thermo-sensitive chitosan–cellulose derivative hydrogels: swelling behaviour and morphologic studies
  387. Synthesis and characterization of novel piezoelectric nitrile copolyimide films for high temperature sensor applications
  388. Sharing of classical and quantum correlations via XY interaction
  389. Effect of filler dispersion and dispersion method on the piezoelectric and magnetoelectric response of CoFe2O4/P(VDF-TrFE) nanocomposites
  390. Effect of cylindrical filler aggregation on the electrical conductivity of composites
  391. Influence of different salts in poly(vinylidene fluoride-co-trifluoroethylene) electrolyte separator membranes for battery applications
  392. Aluminosilicate and aluminosilicate based polymer composites: Present status, applications and future trends
  393. Synthesis of iron-doped TiO2 nanoparticles by ball-milling process: the influence of process parameters on the structural, optical, magnetic, and photocatalytic properties
  394. Modifying Fish Gelatin Electrospun Membranes for Biomedical Applications: Cross-Linking and Swelling Behavior
  395. Predicting the mechanical behavior of amorphous polymeric materials under strain through multi-scale simulation
  396. Enhancement of adhesion and promotion of osteogenic differentiation of human adipose stem cells by poled electroactive poly(vinylidene fluoride)
  397. Effect of carbon nanotube type and functionalization on the electrical, thermal, mechanical and electromechanical properties of carbon nanotube/styrene–butadiene–styrene composites for large strain sensor applications
  398. All-Inkjet-Printed Bottom-Gate Thin-Film Transistors Using UV Curable Dielectric for Well-Defined Source-Drain Electrodes
  399. Piezoelectric coaxial filaments produced by coextrusion of poly(vinylidene fluoride) and electrically conductive inner and outer layers
  400. PHB-PEO electrospun fiber membranes containing chlorhexidine for drug delivery applications
  401. Electroactive phases of poly(vinylidene fluoride): Determination, processing and applications
  402. Effect of neutralization and cross-linking on the thermal degradation of chitosan electrospun membranes
  403. Evaluation of dielectric models for ceramic/polymer composites: Effect of filler size and concentration
  404. Extruded thermoplastic elastomers styrene–butadiene–styrene/carbon nanotubes composites for strain sensor applications
  405. Effect of filler content on morphology and physical–chemical characteristics of poly(vinylidene fluoride)/NaY zeolite-filled membranes
  406. Polymer-based acoustic streaming for improving mixing and reaction times in microfluidic applications
  407. Electrosprayed poly(vinylidene fluoride) microparticles for tissue engineering applications
  408. Processing and Electrical Response of Fully Polymer Piezoelectric Filaments for E-Textiles Applications
  409. Poly(vinylidene fluoride)-based, co-polymer separator electrolyte membranes for lithium-ion battery systems
  410. Li-ion battery separator membranes based on barium titanate and poly(vinylidene fluoride-co-trifluoroethylene): Filler size and concentration effects
  411. Fatigue prediction in fibrin poly-ε-caprolactone macroporous scaffolds
  412. Development of solid polymer electrolytes based on poly(vinylidene fluoride-trifluoroethylene) and the [N1 1 1 2(OH)][NTf2] ionic liquid for energy storage applications
  413. Crystallization kinetics of montmorillonite/poly(vinylidene fluoride) composites and its correlation with the crystalline polymer phase formation
  414. Piezoresistive response of carbon nanotubes-polyamides composites processed by extrusion
  415. Electrospun silk-elastin-like fibre mats for tissue engineering applications
  416. Optimization of the Magnetoelectric Response of Poly(vinylidene fluoride)/Epoxy/Vitrovac Laminates
  417. Li-ion battery separator membranes based on poly(vinylidene fluoride-trifluoroethylene)/carbon nanotube composites
  418. Bioactive albumin functionalized polylactic acid membranes for improved biocompatibility
  419. Electro-mechanical properties of triblock copolymer styrene–butadiene–styrene/carbon nanotube composites for large deformation sensor applications
  420. Processing and characterization of α-elastin electrospun membranes
  421. Development of inkjet printed strain sensors
  422. Relationship between electromechanical response and percolation threshold in carbon nanotube/poly(vinylidene fluoride) composites
  423. Extrusion of poly(vinylidene fluoride) recycled filaments: Effect of the processing cycles on the degree of crystallinity and electroactive phase content
  424. Thermal and hydrolytic degradation of electrospun fish gelatin membranes
  425. Introduction to the special issue for ISAF-ECAPD-PFM 2012
  426. Influence of electrospinning parameters on poly(hydroxybutyrate) electrospun membranes fiber size and distribution
  427. Large linear anhysteretic magnetoelectric voltage coefficients in CoFe2O4/polyvinylidene fluoride 0–3 nanocomposites
  428. Polypropylene-Carbon Nanofiber Composites as Strain-Gauge Sensor
  429. Energy harvesting performance of piezoelectric electrospun polymer fibers and polymer/ceramic composites
  430. Effect of fiber orientation in gelled poly(vinylidene fluoride) electrospun membranes for Li-ion battery applications
  431. Piezoresistive sensors for force mapping of hip-prostheses
  432. Influence of solvent properties on the electrical response of poly(vinylidene fluoride)/NaY composites
  433. Nanoparticle Size and Concentration Dependence of the Electroactive Phase Content and Electrical and Optical Properties of Ag/Poly(vinylidene fluoride) Composites
  434. Multilayer spin-coating deposition of poly(vinylidene fluoride) films for controlling thickness and piezoelectric response
  435. Carbon nanofiber type and content dependence of the physical properties of carbon nanofiber reinforced polypropylene composites
  436. Polymer-Based Magnetoelectric Materials
  437. γ-Phase nucleation and electrical response of poly(vinylidene fluoride)/microporous titanosilicates composites
  438. Dielectric relaxation, ac conductivity and electric modulus in poly(vinylidene fluoride)/NaY zeolite composites
  439. Thermal degradation of Pb(Zr0.53Ti0.47 )O3/poly(vinylidene fluoride) composites as a function of ceramic grain size and concentration
  440. Piezoelectric transducer system for improving mixing in 96 well microplates
  441. Nucleation of the electroactive β-phase, dielectric and magnetic response of poly(vinylidene fluoride) composites with Fe2O3 nanoparticles
  442. An overview of modeling and simulation for lab-on-a-chip applications
  443. Composition-dependent physical properties of poly[(vinylidene fluoride)-co-trifluoroethylene]–poly(ethylene oxide) blends
  444. Effect of poling state and morphology of piezoelectric poly(vinylidene fluoride) membranes for skeletal muscle tissue engineering
  445. Guest Editorial
  446. Battery separators based on vinylidene fluoride (VDF) polymers and copolymers for lithium ion battery applications
  447. Preparation of Magnetoelectric Composites by Nucleation of the Electroactive β-Phase of Poly(vinylidene fluoride) by NiZnFe2O4 Nanoparticles
  448. Novel poly(vinylidene fluoride-trifluoroethylene)/poly(ethylene oxide) blends for battery separators in lithium-ion applications
  449. Microporous membranes of NaY zeolite/poly(vinylidene fluoride–trifluoroethylene) for Li-ion battery separators
  450. Improving the binding capacity of Ni2+ decorated porous magnetic silica spheres for histidine-rich protein separation
  451. Interface characterization and thermal degradation of ferrite/poly(vinylidene fluoride) multiferroic nanocomposites
  452. Physical-chemical properties of cross-linked chitosan electrospun fiber mats
  453. A numerical study on the heat transfer generated by a piezoelectric transducer in a microfluidic system
  454. Influence of zeolite structure and chemistry on the electrical response and crystallization phase of poly(vinylidene fluoride)
  455. Evaluation of the main processing parameters influencing the performance of poly(vinylidene fluoride–trifluoroethylene) lithium-ion battery separators
  456. Osteoblast, fibroblast and in vivo biological response to poly(vinylidene fluoride) based composite materials
  457. Rheological and electrical analysis in carbon nanofiber reinforced polypropylene composites
  458. Porous Membranes of Montmorillonite/Poly(vinylidene fluoride-trifluorethylene) for Li-Ion Battery Separators
  459. Electrical and thermal behavior of γ-phase poly(vinylidene fluoride)/NaY zeolite composites
  460. Temperature dependence of the electrical conductivity of vapor grown carbon nanofiber/epoxy composites with different filler dispersion levels
  461. Mechanical, electrical and electro-mechanical properties of thermoplastic elastomer styrene–butadiene–styrene/multiwall carbon nanotubes composites
  462. Influence of filler size and concentration on the low and high temperature dielectric response of poly(vinylidene fluoride) /Pb(Zr0.53Ti0.47)O3 composites
  463. Influence of fiber diameter and crystallinity on the stability of electrospun poly(l-lactic acid) membranes to hydrolytic degradation
  464. Optimization of piezoelectric ultrasound emitter transducers for underwater communications
  465. Local piezoelectric response of single poly(vinylidene fluoride) electrospun fibers
  466. Fiber average size and distribution dependence on the electrospinning parameters of poly(vinylidene fluoride–trifluoroethylene) membranes for biomedical applications
  467. Local piezoelectric activity of single poly(L-lactic acid) (PLLA) microfibers
  468. Fabrication of Poly(lactic acid)-Poly(ethylene oxide) Electrospun Membranes with Controlled Micro to Nanofiber Sizes
  469. Effect of Zeolite Content in the Electrical, Mechanical and Thermal Degradation Response of Poly(vinylidene fluoride)/NaY Zeolite Composites
  470. Suitability of PLLA as Piezoelectric Substrates for Tissue Engineering Evidenced by Microscopy Techniques
  471. Reversible Aggregation and Chemical Resistance of Magnetic Nanoclusters for Their Recycling and Repetitive Use in Industrial Bioprocesses
  472. Quantitative evaluation of the dispersion achievable using different preparation methods and DC electrical conductivity of vapor grown carbon nanofiber/epoxy composites
  473. Nanoparticle Dispersion and Electroactive Phase Content in Polyvinylidene Fluoride/Ni0.5Zn0.5Fe2O4 Nanocomposites for Magnetoelectric Applications
  474. Hydrothermal assisted synthesis of iron oxide-based magnetic silica spheres and their performance in magnetophoretic water purification
  475. Role of Nanoparticle Surface Charge on the Nucleation of the Electroactive β-Poly(vinylidene fluoride) Nanocomposites for Sensor and Actuator Applications
  476. Improving the optical and electroactive response of poly(vinylidene fluoride–trifluoroethylene) spin-coated films for sensor and actuator applications
  477. The effect of nanotube surface oxidation on the electrical properties of multiwall carbon nanotube/poly(vinylidene fluoride) composites
  478. Room Temperature Magnetic Response of Sputter Deposited TbDyFe Films as a Function of the Deposition Parameters
  479. Effect of degree of porosity on the properties of poly(vinylidene fluoride–trifluorethylene) for Li-ion battery separators
  480. Comparative analyses of the electrical properties and dispersion level of VGCNF and MWCNT: Epoxy composites
  481. Effect of filler dispersion on the electromechanical response of epoxy/vapor-grown carbon nanofiber composites
  482. Effect of the microsctructure and lithium-ion content in poly[(vinylidene fluoride)-co-trifluoroethylene]/lithium perchlorate trihydrate composite membranes for battery applications
  483. Relaxation dynamics of poly(vinylidene fluoride) studied by dynamical mechanical measurements and dielectric spectroscopy
  484. Electromechanical performance of poly(vinylidene fluoride)/carbon nanotube composites for strain sensor applications
  485. Piezoresistive response of Pluronic-wrapped single-wall carbon nanotube–epoxy composites
  486. Piezoresistive polypropylene–carbon nanofiber composites as mechanical transducers
  487. Fibronectin adsorption and cell response on electroactive poly(vinylidene fluoride) films
  488. Assessment of parameters influencing fiber characteristics of chitosan nanofiber membrane to optimize fiber mat production
  489. Critical behavior of a three-dimensional hardcore-cylinder composite system
  490. Piezoresistive effect in spin-coated polyaniline thin films
  491. Modeling and simulation of acoustic propagation for mixing and pumping fluids in lab-on-a-chip devices
  492. Correlation between Crystallization Kinetics and Electroactive Polymer Phase Nucleation in Ferrite/Poly(vinylidene fluoride) Magnetoelectric Nanocomposites
  493. Modeling Carbon Nanotube Electrical Properties in CNT/Polymer Composites
  494. On the origin of the electroactive poly(vinylidene fluoride) β-phase nucleation by ferrite nanoparticles via surface electrostatic interactions
  495. Influence of crystallinity and fiber orientation on hydrophobicity and biological response of poly(l-lactide) electrospun mats
  496. Enhanced proliferation of pre-osteoblastic cells by dynamic piezoelectric stimulation
  497. Electroactive Poly(Vinylidene Fluoride-Trifluorethylene) (PVDF-TrFE) Microporous Membranes for Lithium-Ion Battery Applications
  498. Determination of the parameters affecting electrospun chitosan fiber size distribution and morphology
  499. The role of disorder on the AC and DC electrical conductivity of vapour grown carbon nanofibre/epoxy composites
  500. Microporous Poly(Vinylidene Fluoride – Trifluoroethylene)/Zeolite Membranes for Lithium-Ion Battery Applications
  501. Dielectric and magnetic properties of ferrite/poly(vinylidene fluoride) nanocomposites
  502. Development of a Piezoelectric Transducers System to Improve Mixing of Fluids
  503. Design and characterization of Ni2+ and Co2+ decorated Porous Magnetic Silica spheres synthesized by hydrothermal-assisted modified-Stöber method for His-tagged proteins separation
  504. [P1.034] Comparing Performance of Solid Polymer Electrolytes Based on Poly(Vinylidene Fluoride – Trifluoroethylene) Obtained by Different Processing Techniques
  505. Tailoring porous structure of ferroelectric poly(vinylidene fluoride-trifluoroethylene) by controlling solvent/polymer ratio and solvent evaporation rate
  506. Optimizing piezoelectric and magnetoelectric responses on CoFe 2 O 4 /P(VDF-TrFE) nanocomposites
  507. Bi2Te3-Sb2Te3 on polymeric substrate for X-ray detectors based on the seebeck effect
  508. Linear anhysteretic direct magnetoelectric effect in Ni 0.5 Zn 0.5 Fe 2 O 4 /poly(vinylidene fluoride-trifluoroethylene) 0-3 nanocomposites
  509. Nucleation of the Electroactive γ Phase and Enhancement of the Optical Transparency in Low Filler Content Poly(vinylidene)/Clay Nanocomposites
  510. Effect of filler size and concentration on the structure and properties of poly(vinylidene fluoride)/BaTiO3 nanocomposites
  511. Thermal Properties of Electrospun Poly(Lactic Acid) Membranes
  512. Micro and nanofilms of poly(vinylidene fluoride) with controlled thickness, morphology and electroactive crystalline phase for sensor and actuator applications
  513. Influence of Ferrite Nanoparticle Type and Content on the Crystallization Kinetics and Electroactive Phase Nucleation of Poly(vinylidene fluoride)
  514. The influence of the dispersion method on the electrical properties of vapor-grown carbon nanofiber/epoxy composites
  515. Piezoresistive silicon thin film sensor array for biomedical applications
  516. Effect of the carbon nanotube surface characteristics on the conductivity and dielectric constant of carbon nanotube/poly(vinylidene fluoride) composites
  517. Thermal, dielectrical and mechanical response of α and β-poly(vinilydene fluoride)/Co-MgO nanocomposites
  518. The influence of matrix mediated hopping conductivity, filler concentration, aspect ratio and orientation on the electrical response of carbon nanotube/polymer nanocomposites
  519. Lab-on-a-chip using acoustic streaming for mixing and pumping fluids
  520. Extrusion of poly(vinylidene fluoride) filaments: effect of the processing conditions and conductive inner core on the electroactive phase content and mechanical properties
  521. Tailoring the morphology and crystallinity of poly(L-lactide acid) electrospun membranes
  522. Applying complex network theory to the understanding of high-aspect-ratio carbon-filled composites
  523. Horizontal low gradient magnetophoresis behaviour of iron oxide nanoclusters at the different steps of the synthesis route
  524. Degradation of the dielectric and piezoelectric response of β-poly(vinylidene fluoride) after temperature annealing
  525. Review on X-ray Detectors Based on Scintillators and CMOS Technology
  526. Poly(vinylidene fluoride-trifluoroethylene) (72/28) interconnected porous membranes obtained by crystallization from solution
  527. Large Area Microfabrication of Electroactive Polymeric Structures Based on Near-Field Electrospinning
  528. Nucleation of the electroactive phase of poly(vinylidene fluoride) by ferrite nanoparticles: surface versus size effects
  529. Cohesive strength of nanocrystalline ZnO:Ga thin films deposited at room temperature
  530. The Role of Solvent Evaporation in the Microstructure of Electroactive β-Poly(Vinylidene Fluoride) Membranes Obtained by Isothermal Crystallization
  531. Mn-doped ZnO nanocrystals embedded in Al 2 O 3 : structural and electrical properties
  532. Pixel Readout Circuit for X-Ray Imagers
  533. Hydrogel-based photonic sensor for a biopotential wearable recording system
  534. Influence of Processing Conditions on Polymorphism and Nanofiber Morphology of Electroactive Poly(vinylidene fluoride) Electrospun Membranes
  535. Enhancement of the Dielectric Constant and Thermal Properties of α-Poly(vinylidene fluoride)/Zeolite Nanocomposites
  536. Influence of processing parameters on the polymer phase, microstructure and macroscopic properties of poly(vinilidene fluoride)/Pb(Zr0.53Ti0.47)O3 composites
  537. Nucleation of electroactive β-phase poly(vinilidene fluoride) with CoFe2O4 and NiFe2O4 nanofillers: a new method for the preparation of multiferroic nanocomposites
  538. Multifunctional Braided Composite Rods for Civil Engineering Applications
  539. Stability of the electroactive response of β-poly(vinylidene fluoride) for applications in the petrochemical industry
  540. Design and fabrication of piezoelectric microactuators based on β-poly (vinylidene fluoride) films for microfluidic applications
  541. X-ray scattering experiments on sputtered titanium dioxide coatings onto PVDF polymers for self-cleaning applications
  542. α- and γ-PVDF: Crystallization kinetics, microstructural variations and thermal behaviour
  543. Touchscreen based on acoustic pulse recognition with piezoelectric polymer sensors
  544. Heating of samples by acoustic microagitation for improving reaction of biological fluids
  545. Strain dependence electrical resistance and cohesive strength of ITO thin films deposited on electroactive polymer
  546. Poly[(vinylidene fluoride)-co -trifluoroethylene] Membranes Obtained by Isothermal Crystallization from Solution
  547. The piezoresistive effect in polypropylene—carbon nanofibre composites obtained by shear extrusion
  548. Lab-on-a-Chip With β-Poly(Vinylidene Fluoride) Based Acoustic Microagitation
  549. Influence of the β-phase content and degree of crystallinity on the piezo- and ferroelectric properties of poly(vinylidene fluoride)
  550. Energy Harvesting From Piezoelectric Materials Fully Integrated in Footwear
  551. Degradation studies of transparent conductive electrodes on electroactive poly(vinylidene fluoride) for uric acid measurements
  552. N-Doped Photocatalytic Titania Thin Films on Active Polymer Substrates
  553. Influence of fiber aspect ratio and orientation on the dielectric properties of polymer-based nanocomposites
  554. Functionally graded electroactive Poly(vinylidene fluoride) polymers
  555. Self-monitoring Composite Rods for Sustainable Construction
  556. Contribution to the Study of Ferrite Nanobeads: Synthesis, Characterization and Investigation of Horizontal Low Gradient Magnetophoresis Behaviour
  557. Comparative finite element analyses of piezoelectric ceramics and polymers at high frequency for underwater wireless communications
  558. Isothermal crystallization kinetics of poly(vinylidene fluoride) in the α-phase in the scope of the Avrami equation
  559. Sigma-delta A/D converter for CMOS image sensors
  560. Piezoelectric micropump for lab-on-a-chip applications
  561. Piezoelectric sensor for acoustic wave detection in anisotropic systems
  562. The dominant role of tunneling in the conductivity of carbon nanofiber-epoxy composites
  563. Structural and electrical properties of Al doped ZnO thin films deposited at room temperature on poly(vinilidene fluoride) substrates
  564. The effect of fibre concentration on the α to β-phase transformation, degree of crystallinity and electrical properties of vapour grown carbon nanofibre/poly(vinylidene fluoride) composites
  565. X-Ray Image Detector Based on Light Guides and Scintillators
  566. Biological microdevice with fluidic acoustic streaming for measuring uric acid in human saliva
  567. Capacitive Sensor for Three-Axis Force Measurements and Its Readout Electronics
  568. Effect of the ceramic grain size and concentration on the dynamical mechanical and dielectric behavior of poly(vinilidene fluoride) Pb(Zr0.53Ti0.47)O3 composites
  569. Ultra-sensitive shape sensor test structures based on piezoresistive doped nanocrystalline silicon
  570. Flexible x-ray detector based on the Seebeck effect
  571. α to β Phase Transformation and Microestructural Changes of PVDF Films Induced by Uniaxial Stretch
  572. Effect of antistatic additives on mechanical and electrical properties of polyethylene foams
  573. Influence of Silver Nanoparticles Concentration on the α- to β-Phase Transformation and the Physical Properties of Silver Nanoparticles Doped Poly(vinylidene fluoride) Nanocomposites
  574. Wearable brain cap with contactless electroencephalogram measurement for brain-computer interface applications
  575. Effect of the ceramic grain size and concentration on the dynamical mechanical and dielectric behavior of poly(vinilidene fluoride)/Pb(Zr0.53Ti0.47)O3 composites
  576. Relationship between the microstructure and the microscopic piezoelectric response of the α- and β-phases of poly(vinylidene fluoride)
  577. Organic functionalization of carbon nanofibers for composite applications
  578. Development of a Flexible Conductive Polymer Membrane on Electroactive Hydrogel Microfibers
  579. Local variation of the dielectric properties of poly(vinylidene fluoride) during the α- to β-phase transformation
  580. Low percolation transitions in carbon nanotube networks dispersed in a polymer matrix: dielectric properties, simulations and experiments
  581. Sensors: Focus on Tactile Force and Stress Sensors
  582. Three Dimensional Capacitive Force Sensor for Tactile Applications
  583. PVD-Grown photocatalytic TiO2 thin films on PVDF substrates for sensors and actuators applications
  584. Molecular Orientation and Degree of Crystallinity of Piezoelectric Poly(Vinylidene Fluoride) Films Exclusively in the β Phase
  585. Performance of electroactive poly(vinylidene fluoride) against UV radiation
  586. X-Ray CMOS detector array with scintillating light guides
  587. Ultrasonic Transducer Based on β-PVDF for Fluidic Microagitation in a Lab-on-a-Chip Device
  588. Microscopic origin of the high-strain mechanical response of poled and non-poled poly(vinylidene fluoride) in the β-phase
  589. Influence of the Crystallization Kinetics on the Microstructural Properties of γ-PVDF
  590. Photodegradation Studies of Poly(Vinylidene Fluoride)
  591. Piezoelectric β-PVDF polymer films as fluid acoustic microagitator
  592. Influence of the chemical and electronic structure on the electrical behavior of zirconium oxynitride films
  593. Fabrication of a strain sensor for bone implant failure detection based on piezoresistive doped nanocrystalline silicon
  594. Strain analysis of photocatalytic TiO2 thin films on polymer substrates
  595. Influence of air oxidation on the properties of decorative NbOxNy coatings prepared by reactive gas pulsing
  596. Structural and Mechanical Properties of AZOY Thin Films Deposited on Flexible Substrates
  597. Poly(vinylidene fluoride) Electrospun Fibers for Electroactive Scaffold Aplications: Influence of the Applied Voltage on Morphology and Polymorphism
  598. A Lab-on-a-Chip for Clinical Analysis with Acoustic Microagitation based on Piezoelectric Poly(Vinilidene Fluoride)
  599. Ultrasonic Transducer Based on β-PVDF for Fluidic Microagitation in a Lab-on-a-Chip Device
  600. On the Dispersion of Carbon Nanofibre-Based Suspensions in Simple Shear: An Experimental Study
  601. Relationship between processing conditions, defects and thermal degradation of poly(vinylidene fluoride) in the β-phase
  602. CMOS X-ray Image Sensor Array
  603. Piezoresistive properties of nanocrystalline silicon thin films deposited on plastic substrates by hot-wire chemical vapor deposition
  604. Liquid Flow Sensor Based on PVDF in its Beta Phase
  605. Flexible X-Ray Detector Based on the Seebeck Effect
  606. Reconfigurable On-Chip Folded-Patch Antenna using Tunable Electroactive Materials
  607. New technique of processing highly oriented poly(vinylidene fluoride) films exclusively in the β phase
  608. Thermal characterization of a vinylidene fluoride-trifluorethylene (75–25) (%mol) copolymer film
  609. Property change in multifunctional TiCxOy thin films: Effect of the O/Ti ratio
  610. 3-D Modeling of Scintillator-Based X-ray Detectors
  611. Processing and characterization of a novel nonporous poly(vinilidene fluoride) films in the β phase
  612. A Tunable Fabry-Perot Optical Filter for Application in Biochemical Analysis of Human's Fluids
  613. 3 Axis Capacitive Tactile Sensor and Readout Electronics
  614. Phase diagram of the betaine arsenate–betaine phosphate mixed-crystal system by dielectric hysteresis and current curves
  615. Separation of the Pyro- and Piezoelectric Response of Electroactive Polymers for Sensor Applications
  616. Effect of Poling on the Mechanical Properties of β-Poly(Vinylidene Fluoride)
  617. α- to β Transformation on PVDF Films Obtained by Uniaxial Stretch
  618. Electrical and Microstructural Changes of β-PVDF under Uniaxial Stress Studied by Scanning Force Microscopy
  619. Influence of the Crystallisation Kinetics on the Microstructural Properties of α-PVDF
  620. Piezoelectric and Optical Response of Uniaxially Stretched (VDF/TrFE) (75/25) Copolymer Films
  621. Optical coupling between scintillators and standard CMOS detectors
  622. Poling of β-poly(vinylidene fluoride): dielectric and IR spectroscopy studies
  623. Atomistic modelling of processes involved in poling of PVDF
  624. Influence of nitrogen content on the structural, mechanical and electrical properties of TiN thin films
  625. Polarization behavior in systems with competing ferroelectric and antiferroelectric interactions
  626. 3 Axis Capacitive Tactile Sensor
  627. Characterization of poled and non-poled β-PVDF films using thermal analysis techniques
  628. Comparison between bulk micromachined and CMOS X-ray detectors
  629. Dynamic mechanical analysis and creep behaviour of β-PVDF films
  630. CMOS X-rays detector array based on scintillating light guides
  631. Electrical Response of β-PVDF in a Constant Uniaxial Strain Rate Deformation
  632. Effect of the mechanical stretching on the ferroelectric properties of a (VDF/TrFE) (75/25) copolymer film
  633. Behaviour of the Ferroelectric Phase Transition of P(VDF/TrFE) (75/25) with Increasing Deformation
  634. Paraelectric-Antiferroelectric Phase Coexistence in the Deuteron Glass Rb0.5(ND4)0.5D2AsO4
  635. Ferroelectric/Antiferroelectric Phase Coexistence in the Intermediate Concentration Regions of the BAxBP1–xPhase Diagram
  636. X-ray detector based on a bulk micromachined photodiode combined with a scintillating crystal
  637. Mechanical Characterization and Influence of the High Temperature Shrinkage of β-PVDF Films on its Electromechanical Properties
  638. Chain Reorientation in β-PVDF Films Upon Transverse Mechanical Deformation Studied by SEM and Dielectric Relaxation
  639. Physical and morphological characterization of reactively magnetron sputtered TiN films
  640. Antiferroelectric ADP doping in ferroelectric TGS crystals
  641. The Dynamics of the Glass Transition in a Semicrystalline PET Studied by Mechanical and Dielectric Spectroscopic Methods
  642. Phase Diagram and Dielectric Properties of Mixed Cs 1−X (NH 4 ) X H 2 PO 4 Crystals
  643. Dielectric Behavior in an Oriented β-PVDF Film and Chain Reorientation Upon Transverse Mechanical Deformation
  644. Cooperative and Local Relaxations in Complex Systems: Polymers and Crystals
  645. Re-crystallization of MNA under a strong dc electric field
  646. FTIR AND DSC STUDIES OF MECHANICALLY DEFORMED β-PVDF FILMS
  647. Simple versus cooperative relaxations in complex correlated systems
  648. Dielectric relaxation in pure and irradiated TGSP crystals
  649. Anomalous and normal protonic conductivity in Cs1−x(NH4)xH2PO4, Cs1−x(ND4)xD2PO4, and K1−x(NH4)xH2PO4
  650. Dielectric, NMR and X-ray diffraction study of pseudo-one-dimensional Cs1−x(NH4)xH2PO4
  651. Review of experimental and theoretical results for the betaine arsenate/phosphate mixed crystals system
  652. Phase coexistence in the deuteron glass Rb0.9(ND4)0.1D2AsO4proven by neutron diffraction
  653. Influence of NH4-Rb substitution on the phase transitions with different kinds of proton disorder in mixed [(NH4)1–xRbx]3H(SO4)2crystals
  654. Dielectric behavior of betaine arsenate/phosphate mixed crystals (BAxBP1−x) in an electric bias field
  655. Phase behaviour and quasi-one dimensionality of betaine arsenate/phosphate mixed crystals
  656. Random fields versus random bond effects in betaine arsenate/phosphate mixed crystals
  657. Investigations on dielectric and structural properties of ferroelectric betaine phosphite (BPI)
  658. Phase diagrams and structural order in mixed crystals BA x BP 1−x for x > 0.80
  659. Competing interactions and phase transitions in betaine arsenate-betaine phosphate (BAxBP1-x)
  660. 10.4028/0-87849-402-2.202
  661. 10.4028/0-87849-402-2.872
  662. 10.4028/0-87849-402-2.915
  663. 10.4028/0-87849-402-2.951
  664. 10.4028/0-87849-402-2.945
  665. Biosystem with 16 highly-selective optical-channels for biological fluids analysis in the visible spectrum