All Stories

  1. Electrodeposition of Ni-nano composite coatings: a review

    Article • Inorganic and Nano-Metal Chemistry, February 2019, Taylor & Francis

    Professor S Basavarajappa

  2. Predictive modelling of dry sliding wear in sealed plasma-sprayed Mo coating using response surface methodology

    Article • Tribology - Materials Surfaces & Interfaces, November 2017, Taylor & Francis

    Dr Manjaiah Mallaiah, Professor S Basavarajappa

  3. Synthesis of Metal Matrix Hybrid Composites and Evaluation of Mechanical and Tribological Properties

    Article • Applied Mechanics and Materials, November 2015, Trans Tech Publications

    Professor S Basavarajappa

  4. tool wear in hard machining

    Article • Journal of Materials Research, August 2015, Cambridge University Press

    Dr R Suresh, Professor S Basavarajappa

  5. glass-epoxy composites

    Article • Industrial Lubrication and Tribology, August 2015, Emerald

    Mr ANNAPPA A R, Professor S Basavarajappa

  6. Effect of electrode material in wire electro discharge machining characteristics of Ti50Ni50−xCux shape memory alloy

    Article • Precision Engineering, July 2015, Elsevier

    Professor S Basavarajappa, Dr Manjaiah Mallaiah

  7. composites

    Article • Industrial Lubrication and Tribology, June 2015, Emerald

    Professor S Basavarajappa, Mr Kiran T.S.

  8. Fourier Transform Infra-Red Spectroscopy and Chemical Resistance of Untreated and Alkali Treated Coconut Leaf Sheath Fiber Reinforced Polymer Composites

    Article • Applied Mechanics and Materials, June 2015, Trans Tech Publications

    Professor S Basavarajappa, Dr. Bharath K N

  9. A Study on Dry Sliding Wear Behaviour of Hybrid Metal Matrix Composites at Room Temperature

    Article • Applied Mechanics and Materials, June 2015, Trans Tech Publications

    Professor S Basavarajappa

  10. Wire Electro Discharge Machining Performance of TiNiCu Shape Memory Alloy

    Article • Silicon, May 2015, Springer Science + Business Media

    Professor S Basavarajappa, Dr Manjaiah Mallaiah

  11. Synthesis and Characterization of Aluminiun 2219 Reinforced with Boron Carbide and Molybdenum Disulfide Metal Matrix Hybrid Composites

    Article • Advanced Materials Research, April 2015, Trans Tech Publications

    Professor S Basavarajappa

  12. Effect of coating thickness on properties of Mo coatings deposited by plasma spraying

    Article • Tribology - Materials Surfaces & Interfaces, March 2015, Taylor & Francis

    Professor S Basavarajappa

  13. The effect of sealing on the wear behaviour of plasma sprayed Mo coating

    Article • International Journal of Surface Science and Engineering, January 2015, Inderscience Publishers

    Professor S Basavarajappa

  14. Dry sliding wear behavior of heat treated hybrid metal matrix composite using Taguchi techniques

    Article • Materials & Design (1980-2015), November 2014, Elsevier

    Professor S Basavarajappa

  15. Wire electric discharge machining characteristics of titanium nickel shape memory alloy

    Article • Transactions of Nonferrous Metals Society of China, October 2014, Elsevier

    Professor S Basavarajappa, Dr Manjaiah Mallaiah

  16. Effect of soapstone filler on dry sliding wear behaviour of fiber reinforced polymeric composite

    Article • International Journal of Plastics Technology, May 2014, Springer Science + Business Media

    Professor S Basavarajappa

  17. Effect of powder particle size on wear resistance of plasma sprayed molybdenum coating

    Article • Proceedings of the Institution of Mechanical Engineers Part J Journal of Engineering Tribology, May 2014, SAGE Publications

    Professor S Basavarajappa

  18. Studies on dry sliding wear behaviour of functionally graded graphite particle-filled glass-epoxy composites

    Article • Composite Interfaces, January 2014, Taylor & Francis

    Professor S Basavarajappa

  19. Flammability Characteristics of Chemical Treated Woven Natural Fabric Reinforced Phenol Formaldehyde Composites

    Article • Procedia Materials Science, January 2014, Elsevier

    Professor S Basavarajappa, Dr. Bharath K N

  20. Dry Sliding Wear Behaviour of Plasma SprayedAl2O3-30%Mo and Mo Coating

    Article • Procedia Materials Science, January 2014, Elsevier

    Professor S Basavarajappa

  21. Analysis of cutting forces and surface roughness in hard turning of AISI 4340 using multilayer coated carbide tool

    Article • International Journal of Machining and Machinability of Materials, January 2014, Inderscience Publishers

    Professor S Basavarajappa

  22. Review on non-conventional machining of shape memory alloys

    Article • Transactions of Nonferrous Metals Society of China, January 2014, Elsevier

    Professor S Basavarajappa, Dr Manjaiah Mallaiah

  23. Effect of Process Parameters on Tool Wear and Surface Roughness during Turning of Hardened Steel with Coated Ceramic Tool

    Article • Procedia Materials Science, January 2014, Elsevier

    Professor S Basavarajappa

  24. Influence of Al2O3 Filler on Slurry Erosion Behavior of Glass/Epoxy Composites

    Article • Procedia Materials Science, January 2014, Elsevier

    Professor S Basavarajappa

  25. Comparison of Microstructure and Properties of Modified 9Cr-1Mo Welds Produced by Narrow Gap Hot Wire and Cold Wire Gas Tungsten Arc Welding Processes

    Article • Procedia Materials Science, January 2014, Elsevier

    Professor S Basavarajappa

  26. Influence of service temperature and secondary fillers on the impact toughness of glass-epoxy composites

    Article • International Journal of Plastics Technology, November 2013, Springer Science + Business Media

    Professor S Basavarajappa

  27. Influence of graphite particles on surface roughness and chip formation studies in turning metal matrix composites

    Article • Materials Research, October 2013, FapUNIFESP (SciELO)

    Professor S Basavarajappa

  28. A bi-objective optimization of supply chain design and distribution operations using non-dominated sorting algorithm: A case study

    Article • Expert Systems with Applications, October 2013, Elsevier

    Professor S Basavarajappa

  29. Multi-Response Optimization in Drilling of Glass Epoxy Polymer Composites Using Simulated Annealing Approach

    Article • Materials Science Forum, July 2013, Trans Tech Publications

    Professor S Basavarajappa

  30. Experimental investigations on performance characteristics in wire electro discharge machining of Ti50Ni42.4Cu7.6 shape memory alloy

    Article • Proceedings of the Institution of Mechanical Engineers Part B Journal of Engineering Manufacture, June 2013, SAGE Publications

    Professor S Basavarajappa, Dr Manjaiah Mallaiah

  31. Location and allocation decisions for multi-echelon supply chain network – A multi-objective evolutionary approach

    Article • Expert Systems with Applications, February 2013, Elsevier

    Professor S Basavarajappa

  32. State-of-the-art research in machinability of hardened steels

    Article • Proceedings of the Institution of Mechanical Engineers Part B Journal of Engineering Manufacture, January 2013, SAGE Publications

    Professor S Basavarajappa

  33. Some studies on three body abrasive wear behaviour of hardfaced and normal plough tool material using Taguchi method

    Article • International Journal of Surface Science and Engineering, January 2013, Inderscience Publishers

    Professor S Basavarajappa

  34. Constrained optimisation of distribution network using new hybrid PSO optimiser

    Article • International Journal of Business and Systems Research, January 2013, Inderscience Publishers

    Professor S Basavarajappa

  35. Investigation on design and fabrication of continuous fiber reinforced composite helical spring for automobile suspension

    Article • January 2013, the Institution of Engineering and Technology (the IET)

    Professor S Basavarajappa

  36. Bi‐objective optimization of distribution scheduling using MOPSO optimizer

    Article • Journal of Modelling in Management, October 2012, Emerald

    Dr RAJESHWAR SIDDESHWAR KADADEVARAMATH, Professor S Basavarajappa

  37. Some studies on hard turning of AISI 4340 steel using multilayer coated carbide tool

    Article • Measurement, August 2012, Elsevier

    Professor S Basavarajappa

  38. Dry sliding wear characteristics of glass–epoxy composite filled with silicon carbide and graphite particles

    Article • Wear, August 2012, Elsevier

    Professor S Basavarajappa

  39. Machinability investigations on hardened AISI 4340 steel using coated carbide insert

    Article • International Journal of Refractory Metals and Hard Materials, July 2012, Elsevier

    Professor S Basavarajappa

  40. Studies on wear resistance of PTFE filled with glass and bronze particles based on Taguchi technique

    Article • Journal of Thermoplastic Composite Materials, May 2012, SAGE Publications

    Mr MUDASAR B.A PASHA, Professor S Basavarajappa

  41. Predictive Modeling of Cutting Forces and Tool Wear in Hard Turning using Response Surface Methodology

    Article • Procedia Engineering, January 2012, Elsevier

    Professor S Basavarajappa

  42. Collapse Mechanism of Foam Cored Sandwich Structures Under Compressive Load

    Article • Polymer-Plastics Technology and Engineering, September 2011, Taylor & Francis

    Professor S Basavarajappa

  43. Experimental Investigations on Some Aspects of Machinability in Drilling of Glass Epoxy Polymer Composites

    Article • Journal of Thermoplastic Composite Materials, June 2011, SAGE Publications

    Professor S Basavarajappa

  44. Dry sliding wear behaviour of PTFE filled with glass and bronze particles

    Article • Tribology - Materials Surfaces & Interfaces, June 2011, Taylor & Francis

    Mr MUDASAR B.A PASHA, Professor S Basavarajappa

  45. Abrasive Wear Behavior of Granite-Filled Glass-Epoxy Composites by SiC Particles Using Statistical Analysis

    Article • Polymer-Plastics Technology and Engineering, April 2011, Taylor & Francis

    Professor S Basavarajappa

  46. Influence of Secondary Fillers on the Behavior of Translaminar Failure in Glass-Epoxy Composites

    Article • Polymer-Plastics Technology and Engineering, April 2010, Taylor & Francis

    Professor S Basavarajappa

  47. Damage characterisation of glass/textile fabric polymer hybrid composites in sea water environment

    Article • Materials & Design (1980-2015), February 2010, Elsevier

    Professor S Basavarajappa

  48. Effect of Applied Load on Dry Sliding Wear Property of Aged TiNiCu Alloy

    Article • Journal of Minerals and Materials Characterization and Engineering, January 2010, Scientific Research Publishing, Inc,

    Professor S Basavarajappa

  49. Hot Rolling and Ageing Effect on the Pseudoelasticity Behaviour of Ti-Rich TiNi Shape Memory Alloy

    Article • Journal of Minerals and Materials Characterization and Engineering, January 2010, Scientific Research Publishing, Inc,

    Professor S Basavarajappa

  50. Three-Body Abrasive Wear Behaviour of Polymer Matrix Composites Filled with SiC Particles

    Article • Polymer-Plastics Technology and Engineering, December 2009, Taylor & Francis

    Professor S Basavarajappa

  51. Studies on dry sliding wear behaviour of Graphite filled glass–epoxy composites

    Article • Materials & Design (1980-2015), August 2009, Elsevier

    Professor S Basavarajappa

  52. Failure Mechanism in Rigid PUF Sandwich Structures with Varied Skin Materials under Bending Load

    Article • Journal of Reinforced Plastics and Composites, July 2009, SAGE Publications

    Professor S Basavarajappa

  53. Tool Wear in Turning of Graphitic Hybrid Metal Matrix Composites

    Article • Materials and Manufacturing Processes, February 2009, Taylor & Francis

    Professor S Basavarajappa

  54. Effect of Filler Materials on Dry Sliding Wear Behavior of Polymer Matrix Composites – A Taguchi Approach

    Article • Journal of Minerals and Materials Characterization and Engineering, January 2009, Scientific Research Publishing, Inc,

    Professor S Basavarajappa

  55. Mechanism of Translaminar Fracture in Glass/Textile Fabric Polymer Hybrid Composites

    Article • Journal of Reinforced Plastics and Composites, November 2008, SAGE Publications

    Professor S Basavarajappa

  56. Some studies on drilling of hybrid metal matrix composites based on Taguchi techniques

    Article • Journal of Materials Processing Technology, January 2008, Elsevier

    Professor S Basavarajappa

  57. Influence of sliding speed on the dry sliding wear behaviour and the subsurface deformation on hybrid metal matrix composite

    Article • Wear, March 2007, Elsevier

    Professor S Basavarajappa

  58. Drilling of hybrid metal matrix composites—Workpiece surface integrity

    Article • International Journal of Machine Tools and Manufacture, January 2007, Elsevier

    Professor S Basavarajappa

  59. Application of Taguchi techniques to study dry sliding wear behaviour of metal matrix composites

    Article • Materials & Design (1980-2015), January 2007, Elsevier

    Professor S Basavarajappa

  60. Dry Sliding Wear Behavior of Metal Matrix Composites: A Statistical Approach

    Article • Journal of Materials Engineering and Performance, December 2006, Springer Science + Business Media

    Professor S Basavarajappa

  61. Dry Sliding Wear Behavior of Al 2219/SiCp-Gr Hybrid Metal Matrix Composites

    Article • Journal of Materials Engineering and Performance, December 2006, Springer Science + Business Media

    Professor S Basavarajappa

  62. Drilling of hybrid aluminium matrix composites

    Article • The International Journal of Advanced Manufacturing Technology, November 2006, Springer Science + Business Media

    Professor S Basavarajappa

  63. Turning of particulate metal matrix composites — review and discussion

    Article • Proceedings of the Institution of Mechanical Engineers Part B Journal of Engineering Manufacture, July 2006, SAGE Publications

    Professor S Basavarajappa

  64. Analysis of burr formation during drilling of hybrid metal matrix composites using design of experiments

    Article • International Journal of Machining and Machinability of Materials, January 2006, Inderscience Publishers

    Professor S Basavarajappa

  65. 7. A review on investigations in drilling of fiber reinforced plastics

    Article • De Gruyter

    Professor S Basavarajappa