All Stories

  1. Magnetic hyperthermia behavior of cobalt and reduced graphene oxide nanocomposites

    Article • Micro & Nano Letters, January 2020, the Institution of Engineering and Technology (the IET)

    S.K. Sadrnezhaad, anahita kakavand

  2. Pulsed Electrodeposition of Gold Nanoparticles on Fluorine-Doped Tin Oxide Glass and Absorption-Based Surface Plasmon Resonance Evaluation

    Article • Journal of Nano Research, June 2015, Trans Tech Publications

    S.K. Sadrnezhaad

  3. Cr–Al2O3nanocomposite film from a trivalent chromium bath

    Article • Anti-Corrosion Methods and Materials, May 2014, Emerald

    S.K. Sadrnezhaad

  4. Simulation of Bioleaching Heat Effects for Enhancement of Copper Recovery from Sarcheshmeh Chalcopyrite

    Article • Metallurgical and Materials Transactions B, April 2014, Springer Science + Business Media

    S.K. Sadrnezhaad

  5. Flower-like boehmite nanostructure formation in two-steps

    Article • Journal of Coordination Chemistry, February 2014, Taylor & Francis

    S.K. Sadrnezhaad

  6. Finite element analysis of mechanical performance of nitinol biliary stent: effect of material properties

    Article • Materials Research Innovations, December 2013, Taylor & Francis

    S.K. Sadrnezhaad

  7. Laser welding of NiTi shape memory alloy: Comparison of the similar and dissimilar joints to AISI 304 stainless steel

    Article • Optics & Laser Technology, December 2013, Elsevier

    S.K. Sadrnezhaad, Professor Ahmad Kermanpur

  8. Erratum to: Effects of Crimping on Mechanical Performance of Nitinol Stent Designed for Femoral Artery: Finite Element Analysis

    Article • Journal of Materials Engineering and Performance, November 2013, Springer Science + Business Media

    S.K. Sadrnezhaad

  9. Effect of Material Properties on the Mechanical Performance of Nitinol Esophageal Stent: Finite Element Analysis

    Article • Materials Science Forum, November 2013, Trans Tech Publications

    S.K. Sadrnezhaad

  10. Production of Nanostructured Ni-Ti-Ag Alloy by Mechanical Alloying

    Article • Advanced Materials Research, November 2013, Trans Tech Publications

    S.K. Sadrnezhaad

  11. Effects of Crimping on Mechanical Performance of Nitinol Stent Designed for Femoral Artery: Finite Element Analysis

    Article • Journal of Materials Engineering and Performance, July 2013, Springer Science + Business Media

    S.K. Sadrnezhaad

  12. Hydroxyapatite nanocomposites: Synthesis, sintering and mechanical properties

    Article • Ceramics International, April 2013, Elsevier

    S.K. Sadrnezhaad

  13. Single and double stage sintering of mechanically alloyed powder for nanostructured Ti6Al4V foams usable in cancellous scaffolds

    Article • International Heat Treatment and Surface Engineering, March 2013, Taylor & Francis

    S.K. Sadrnezhaad

  14. Microstructure and Mechanical Property Change During FSW and GTAW of Al6061 Alloy

    Article • Metallurgical and Materials Transactions A, January 2013, Springer Science + Business Media

    S.K. Sadrnezhaad

  15. Developing a Thermodynamical Method for Prediction of Activity Coefficient of TBP Dissolved in Kerosene

    Article • International Journal of Nonferrous Metallurgy, January 2013, Scientific Research Publishing, Inc,

    S.K. Sadrnezhaad

  16. Influence of pulse parameters on electrocodeposition of Cr–Al2O3nanocomposite coatings from trivalent chromium bath

    Article • International Heat Treatment and Surface Engineering, December 2012, Taylor & Francis

    S.K. Sadrnezhaad

  17. Closed-cell Al alloy composite foams: Production and characterization

    Article • Materials & Design (1980-2015), December 2012, Elsevier

    S.K. Sadrnezhaad

  18. Effects of material properties on mechanical performance of Nitinol stent designed for femoral artery: Finite element analysis

    Article • Scientia Iranica, December 2012, Elsevier

    S.K. Sadrnezhaad

  19. An investigation on the influence of milling time and calcination temperature on the characterization of nano cerium oxide powder synthesized by mechanochemical route

    Article • Materials Research Bulletin, November 2012, Elsevier

    S.K. Sadrnezhaad

  20. Magnesium nanopowder for hydrogen absorption and ammonium perchlorate decomposition

    Article • Materials Letters, October 2012, Elsevier

    S.K. Sadrnezhaad

  21. Kinetics and reaction mechanism of isothermal oxidation of Iranian ilmenite concentrate powder

    Article • Journal of Thermal Analysis and Calorimetry, September 2012, Springer Science + Business Media

    S.K. Sadrnezhaad

  22. Corrosion behavior of aluminum 6061 alloy joined by friction stir welding and gas tungsten arc welding methods

    Article • Materials & Design (1980-2015), August 2012, Elsevier

    S.K. Sadrnezhaad

  23. Pore control in SMA NiTi scaffolds via space holder usage

    Article • Materials Science and Engineering C, July 2012, Elsevier

    S.K. Sadrnezhaad

  24. Synthesis of wide band gap nanocrystalline NiO powder via a sonochemical method

    Article • Ultrasonics Sonochemistry, July 2012, Elsevier

    S.K. Sadrnezhaad

  25. Fabrication of biocompatible titanium scaffolds using space holder technique

    Article • Journal of Materials Science Materials in Medicine, June 2012, Springer Science + Business Media

    S.K. Sadrnezhaad

  26. Effects of Ion-Exchange and Hydrolysis Mechanisms on Lead Silicate Glass Corrosion

    Article • CORROSION, June 2012, NACE International

    S.K. Sadrnezhaad

  27. Property change during nanosecond pulse laser annealing of amorphous NiTi thin film

    Article • Bulletin of Materials Science, June 2012, Springer Science + Business Media

    S.K. Sadrnezhaad

  28. Nanocrystalline copper doped zinc oxide produced from copper doped zinc hydroxide nitrate as a layered precursor

    Article • Advanced Powder Technology, May 2012, Elsevier

    S.K. Sadrnezhaad

  29. Effect of high energy ball milling on compressibility and sintering behavior of alumina nanoparticles

    Article • Ceramics International, May 2012, Elsevier

    S.K. Sadrnezhaad

  30. Effects of morphology on photocatalytic performance of Zinc oxide nanostructures synthesized by rapid microwave irradiation methods

    Article • Superlattices and Microstructures, April 2012, Elsevier

    S.K. Sadrnezhaad

  31. Effect of welding parameters on microstructure, mechanical properties and hot cracking phenomenon in Udimet 520 superalloy

    Article • Materials & Design (1980-2015), April 2012, Elsevier

    S.K. Sadrnezhaad

  32. Fabrication of porous NiTi alloy via powder metallurgy and its mechanical characterization by shear punch method

    Article • Russian Journal of Non-Ferrous Metals, April 2012, Allerton Press

    S.K. Sadrnezhaad

  33. Separation of Re and Mo from roasting-dust leach-liquor using solvent extraction technique by TBP

    Article • Separation and Purification Technology, February 2012, Elsevier

    S.K. Sadrnezhaad

  34. Effects of initial precursor and microwave irradiation on step-by-step synthesis of zinc oxide nano-architectures

    Article • Materials Letters, January 2012, Elsevier

    S.K. Sadrnezhaad

  35. CONTROL OF PARTICLE SIZE AND MORPHOLOGY OF COBALT-FERRITE NANOPARTICLES BY SALT-MATRIX DURING ANNEALING

    Article • International Journal of Modern Physics Conference Series, January 2012, World Scientific Pub Co Pte Lt

    S.K. Sadrnezhaad

  36. EFFECT OF KINETIC PARAMETERS ON GROWTH OF ONE-DIMENSIONAL TIN OXIDE NANOSTRUCTURES

    Article • International Journal of Modern Physics Conference Series, January 2012, World Scientific Pub Co Pte Lt

    S.K. Sadrnezhaad

  37. CHARACTERIZATION OF NICKEL OXIDE NANOPARTICLES SYNTHESIZED VIA RAPID MICROWAVE-ASSISTED ROUTE

    Article • International Journal of Modern Physics Conference Series, January 2012, World Scientific Pub Co Pte Lt

    S.K. Sadrnezhaad

  38. Kinetics of pressure oxidative leaching of molybdenite concentrate by nitric acid

    Article • Hydrometallurgy, January 2012, Elsevier

    S.K. Sadrnezhaad

  39. Large pore volume mesoporous copper particles and scaffold microporous carbon material obtained from an inorganic–organic nanohybrid material, copper-succinate-layered hydroxide

    Article • Journal of Colloid and Interface Science, October 2011, Elsevier

    S.K. Sadrnezhaad

  40. Gel–sol synthesis and aging effect on highly crystalline anatase nanopowder

    Article • Bulletin of Materials Science, October 2011, Springer Science + Business Media

    S.K. Sadrnezhaad

  41. Densification Behavior and Mechanical Properties of Biomimetic Apatite Nanocrystals

    Article • Current Nanoscience, October 2011, Bentham Science Publishers

    S.K. Sadrnezhaad

  42. Neural network prediction of mechanical properties of porous NiTi shape memory alloy

    Article • Powder Metallurgy, July 2011, Taylor & Francis

    S.K. Sadrnezhaad

  43. The Effect of Microstructure on the Photocatalytic Properties of TiO2

    Article • Advanced Materials Research, June 2011, Trans Tech Publications

    S.K. Sadrnezhaad

  44. Hydrothermal synthesis and characterization of TiO2 nanostructures using LiOH as a solvent

    Article • Advanced Powder Technology, May 2011, Elsevier

    S.K. Sadrnezhaad

  45. Corrosion behavior of ZrO2–SiO2–Al2O3 refractories in lead silicate glass melts

    Article • Journal of the European Ceramic Society, May 2011, Elsevier

    S.K. Sadrnezhaad, Dr SAEID KAKOOEI

  46. Fe50Co50 nanoparticles via self-propagating high-temperature synthesis during milling

    Article • Powder Technology, April 2011, Elsevier

    S.K. Sadrnezhaad

  47. Electrochemical synthesis of doped TNT as a nano photocatalyst for color degradation applications

    Article • Desalination and Water Treatment, April 2011, Desalination Publications

    S.K. Sadrnezhaad

  48. Micro arc oxidation of nano-crystalline Ag-doped TiO2 semiconductors

    Article • Materials Letters, March 2011, Elsevier

    S.K. Sadrnezhaad

  49. Corrosion behavior of polypyrrole/hydroxyapatite nanocomposite thin films electropolymerized on NiTi substrates in simulated body fluid

    Article • Werkstoffe und Korrosion, February 2011, Wiley

    S.K. Sadrnezhaad

  50. Nanotechnology in the public eye: the case of Iran, as a developing country

    Article • Journal of Nanoparticle Research, February 2011, Springer Science + Business Media

    S.K. Sadrnezhaad

  51. Zinc-stearate-layered hydroxide nanohybrid material as a precursor to produce carbon nanoparticles

    Article • Journal of Alloys and Compounds, February 2011, Elsevier

    S.K. Sadrnezhaad

  52. Effect of high energy ball milling on compressibility of nanostructured composite powder

    Article • Powder Metallurgy, February 2011, Taylor & Francis

    S.K. Sadrnezhaad

  53. EFFECT OF Si ANTIOXIDANT ON THE RATE OF OXIDATION OF CARBON IN MgO–C REFRACTORY

    Article • International Journal of Engineering, January 2011, International Digital Organization for Scientific Information (IDOSI)

    S.K. Sadrnezhaad

  54. End-closed NiCoFe-B nanotube arrays by electroless method

    Article • Materials Letters, January 2011, Elsevier

    S.K. Sadrnezhaad

  55. Fabrication of aluminum nitride coatings by electrophoretic deposition: Effect of particle size on deposition and drying behavior

    Article • Ceramics International, January 2011, Elsevier

    S.K. Sadrnezhaad

  56. Electrochemical evaluation of nanocrystalline Zn-doped tin oxides as anodes for lithium ion microbatteries

    Article • Journal of Power Sources, January 2011, Elsevier

    S.K. Sadrnezhaad

  57. Preparation of nanostructured high-temperature TZM alloy by mechanical alloying and sintering

    Article • International Journal of Refractory Metals and Hard Materials, January 2011, Elsevier

    S.K. Sadrnezhaad

  58. Hydrothermal Preparation of TiO2-ZnO Nano Core-Shell Structure with Quantum Size Effect

    Article • January 2011, American Institute of Physics

    S.K. Sadrnezhaad

  59. Morphology and magnetic properties of FeCo nanocrystalline powder produced by modified mechanochemical procedure

    Article • Journal of Magnetism and Magnetic Materials, November 2010, Elsevier

    S.K. Sadrnezhaad

  60. CVD fabrication of carbon nanotubes on electrodeposited flower-like Fe nanostructures

    Article • Journal of Alloys and Compounds, October 2010, Elsevier

    S.K. Sadrnezhaad

  61. Effects of annealing on phase evolution, microstructure and magnetic properties of mechanically synthesized nickel-ferrite

    Article • Ceramics International, September 2010, Elsevier

    S.K. Sadrnezhaad

  62. The seeding effect on the microstructure and photocatalytic properties of ZnO nano powders

    Article • Materials Letters, September 2010, Elsevier

    S.K. Sadrnezhaad

  63. Photocatalytic decoloration of Acid Red 27 in presence of SnO2 nanoparticles

    Article • Water Science & Technology, September 2010, IWA Publishing

    S.K. Sadrnezhaad

  64. In vitro bioactivity of novel cured ionomer cement based on iron oxide

    Article • Ceramics International, July 2010, Elsevier

    S.K. Sadrnezhaad

  65. Microwave-assisted synthesis of narcis-like zinc oxide nanostructures

    Article • Journal of Alloys and Compounds, May 2010, Elsevier

    S.K. Sadrnezhaad

  66. W–15wt%Cu nano-composite produced by hydrogen-reduction/sintering of WO3–CuO nano-powder

    Article • International Journal of Refractory Metals and Hard Materials, May 2010, Elsevier

    S.K. Sadrnezhaad

  67. Stabilization of nanostructured materials using fine inert ceramic particles

    Article • Ceramics International, March 2010, Elsevier

    S.K. Sadrnezhaad, Dr Mohammad Bagher Rahaei

  68. Reverse precipitation synthesis and characterization of CeO2 nanopowder

    Article • Journal of Alloys and Compounds, February 2010, Elsevier

    S.K. Sadrnezhaad

  69. Processing and surface properties of Al–AlN composites produced from nanostructured milled powders

    Article • Journal of Alloys and Compounds, February 2010, Elsevier

    S.K. Sadrnezhaad

  70. Self-assembly of boehmite nanopetals to form 3D high surface area nanoarchitectures

    Article • Applied Physics A, January 2010, Springer Science + Business Media

    S.K. Sadrnezhaad

  71. Electrochemical synthesis of flake-like Fe/MWCNTs nanocomposite for hydrogen evolution reaction: Effect of the CNTs on dendrite growth of iron and its electrocatalytic activity

    Article • Current Applied Physics, January 2010, Elsevier

    S.K. Sadrnezhaad

  72. Fabrication of porous NiTi-shape memory alloy objects by partially hydrided titanium powder for biomedical applications

    Article • Materials & Design (1980-2015), December 2009, Elsevier

    S.K. Sadrnezhaad

  73. Structural changes of radial forging die surface during service under thermo-mechanical fatigue

    Article • Materials Science and Engineering A, December 2009, Elsevier

    S.K. Sadrnezhaad

  74. Mechanism of deleading of silicate glass by 0.5N HNO3

    Article • Journal of Non-Crystalline Solids, November 2009, Elsevier

    S.K. Sadrnezhaad

  75. EIS study of porous NiTi biomedical alloy in simulated body fluid

    Article • Werkstoffe und Korrosion, November 2009, Wiley

    S.K. Sadrnezhaad

  76. Synthesis of Fe–Ni nano-particles by low-temperature hydrogen reduction of mechanically alloyed Ni-ferrite

    Article • Journal of Alloys and Compounds, October 2009, Elsevier

    S.K. Sadrnezhaad

  77. WITHDRAWN: W–15 wt% Cu nano-composite produced by hydrogen-reduction/sintering of WO3–CuO nano-powder

    Article • International Journal of Refractory Metals and Hard Materials, October 2009, Elsevier

    S.K. Sadrnezhaad

  78. Improved adhesion of NiTi wire to silicone matrix for smart composite medical applications

    Article • Materials & Design (1980-2015), October 2009, Elsevier

    S.K. Sadrnezhaad, Reza Bagheri

  79. Effect of hydrogen reduction on microstructure and magnetic properties of mechanochemically synthesized Fe–16.5Ni–16.5Co nano-powder

    Article • Journal of Magnetism and Magnetic Materials, September 2009, Elsevier

    S.K. Sadrnezhaad

  80. Influence of SiC nanoparticles and saccharin on the structure and properties of electrodeposited Ni–Fe/SiC nanocomposite coatings

    Article • Journal of Alloys and Compounds, September 2009, Elsevier

    S.K. Sadrnezhaad

  81. PHASE INVERSION PREPARATION AND MORPHOLOGICAL STUDY OF POLYVINYLIDENE FLUORIDE ULTRAFILTRATION MEMBRANE MODIFIED BY NANO-SIZED ALUMINA

    Article • Functional Materials Letters, September 2009, World Scientific Pub Co Pte Lt

    S.K. Sadrnezhaad

  82. Phase transformation behavior of porous NiTi alloy fabricated by powder metallurgical method

    Article • Materials Science and Engineering C, August 2009, Elsevier

    S.K. Sadrnezhaad

  83. Electrochemical potential noise analysis of Cu–BTA system using wavelet transformation

    Article • Journal of Electroanalytical Chemistry, August 2009, Elsevier

    S.K. Sadrnezhaad

  84. Hydrolysis kinetics of lead silicate glass in acid solution

    Article • Journal of Nuclear Materials, June 2009, Elsevier

    S.K. Sadrnezhaad

  85. Mechanism of reaction of molten NiTi with EBM graphite crucible

    Article • Materials Science and Technology, June 2009, Taylor & Francis

    S.K. Sadrnezhaad

  86. Growth of tin oxide nanotubes by aerial carbothermal evaporation

    Article • Applied Physics A, May 2009, Springer Science + Business Media

    S.K. Sadrnezhaad

  87. Suppression of grain growth in sub-micrometer alumina via two-step sintering method

    Article • Journal of the European Ceramic Society, May 2009, Elsevier

    S.K. Sadrnezhaad

  88. The Effect of Conformation Method and Sintering Technique on the Densification and Grain Growth of Nanocrystalline 8 mol% Yttria‐Stabilized Zirconia

    Article • Journal of the American Ceramic Society, May 2009, Wiley

    S.K. Sadrnezhaad

  89. Chemical corrosion and gamma-ray attenuation properties of Zr and Ti containing lead silicate glasses

    Article • Journal of Nuclear Materials, April 2009, Elsevier

    S.K. Sadrnezhaad

  90. Hot pressing of nanocrystalline zinc oxide compacts: Densification and grain growth during sintering

    Article • Ceramics International, April 2009, Elsevier

    S.K. Sadrnezhaad

  91. Simultaneous synthesis and single-step sintering of lead magnesium niobate ceramic using mixed nanopowders

    Article • Ceramics International, April 2009, Elsevier

    S.K. Sadrnezhaad

  92. 3D bundles of self-assembled lanthanum hydroxide nanorods via a rapid microwave-assisted route

    Article • Journal of Alloys and Compounds, April 2009, Elsevier

    S.K. Sadrnezhaad

  93. Formation and rupture of carbonate film: an electrochemical noise approach

    Article • Anti-Corrosion Methods and Materials, March 2009, Emerald

    S.K. Sadrnezhaad

  94. Sintering of titania nanoceramic: Densification and grain growth

    Article • Ceramics International, March 2009, Elsevier

    S.K. Sadrnezhaad

  95. Effect of a novel sintering process on mechanical properties of hydroxyapatite ceramics

    Article • Journal of Alloys and Compounds, March 2009, Elsevier

    S.K. Sadrnezhaad

  96. Rapid formation of hydroxyapatite nanostrips via microwave irradiation

    Article • Journal of Alloys and Compounds, February 2009, Elsevier

    S.K. Sadrnezhaad

  97. Chemical durability of lead silicate glass in HNO3, HCl and H2SO4 aqueous acid solutions

    Article • Journal of Non-Crystalline Solids, February 2009, Elsevier

    S.K. Sadrnezhaad

  98. Nanostructure sword-like ZnO wires: Rapid synthesis and characterization through a microwave-assisted route

    Article • Journal of Alloys and Compounds, February 2009, Elsevier

    S.K. Sadrnezhaad

  99. Self-assembled nanostructured ZnO hollow spheres with UVA luminescence

    Article • Advances in Applied Ceramics Structural Functional and Bioceramics, February 2009, SAGE Publications

    S.K. Sadrnezhaad

  100. ChemInform Abstract: Surfactant‐Free Hydrothermal Formation of Pb3O4 Nanorods.

    Article • ChemInform, January 2009, Wiley

    S.K. Sadrnezhaad

  101. Two-step sintering of nanocrystalline 8Y2O3 stabilized ZrO2 synthesized by glycine nitrate process

    Article • Ceramics International, January 2009, Elsevier

    S.K. Sadrnezhaad

  102. Self-assembly of ZnO nanoparticles and subsequent formation of hollow microspheres

    Article • Journal of Alloys and Compounds, January 2009, Elsevier

    S.K. Sadrnezhaad

  103. Manufacturing Porous BCP Body by Negative Polymer Replica as a Bone Tissue Engineering Scaffold

    Article • January 2009, Springer Science + Business Media

    S.K. Sadrnezhaad

  104. Ultrasonic induced photoluminescence decay in sonochemically obtained cauliflower-like ZnO nanostructures with surface 1D nanoarrays

    Article • Ultrasonics Sonochemistry, January 2009, Elsevier

    S.K. Sadrnezhaad

  105. Mathematical model for a straight grate iron ore pellet induration process of industrial scale

    Article • Computational Materials Science, December 2008, Elsevier

    S.K. Sadrnezhaad

  106. Rapid Formation of Mono‐Dispersed Hydroxyapatite Nanorods with Narrow‐Size Distribution via Microwave Irradiation

    Article • Journal of the American Ceramic Society, November 2008, Wiley

    S.K. Sadrnezhaad

  107. Surfactant free hydrothermal formation of Pb3O4 nanorods

    Article • Journal of Alloys and Compounds, October 2008, Elsevier

    S.K. Sadrnezhaad

  108. Boehmite nanopetals self assembled to form rosette-like nanostructures

    Article • Materials Letters, October 2008, Elsevier

    S.K. Sadrnezhaad

  109. Self‐Assembly of Dandelion‐Like Hydroxyapatite Nanostructures Via Hydrothermal Method

    Article • Journal of the American Ceramic Society, October 2008, Wiley

    S.K. Sadrnezhaad

  110. Effect of Microstructure on Rolling Behavior of NiTi Memory Alloy

    Article • Materials and Manufacturing Processes, September 2008, Taylor & Francis

    S.K. Sadrnezhaad

  111. Bundles of self-assembled boehmite nanostrips from a surfactant free hydrothermal route

    Article • Journal of Alloys and Compounds, August 2008, Elsevier

    S.K. Sadrnezhaad

  112. Photocatalytic Decolorization of Red Dye in Aqueous ZnO-TiO2 Suspensions

    Article • Advanced Materials Research, August 2008, Trans Tech Publications

    S.K. Sadrnezhaad

  113. Bone-like apatite layer formation on the new resin-modified glass-ionomer cement

    Article • Journal of Materials Science Materials in Medicine, July 2008, Springer Science + Business Media

    S.K. Sadrnezhaad

  114. Two-step sintering of titania nanoceramics assisted by anatase-to-rutile phase transformation

    Article • Scripta Materialia, July 2008, Elsevier

    S.K. Sadrnezhaad

  115. Self-assembled zinc oxide nanostructures via a rapid microwave-assisted route

    Article • Journal of Crystal Growth, July 2008, Elsevier

    S.K. Sadrnezhaad

  116. Synthesis of nano-hydroxyapatite under a sonochemical/hydrothermal condition

    Article • Biomedical Materials, March 2008, Institute of Physics Publishing

    S.K. Sadrnezhaad

  117. Synthesis of Fe<sub>3</sub>O<sub>4</sub> Nanoparticles Prepared by Various Surfactants and Studying their Characterizations

    Article • February 2008, CrossRef Test Account

    S.K. Sadrnezhaad

  118. Electrodeposition of Ni–SiC nano-composite coatings and evaluation of wear and corrosion resistance and electroplating characteristics

    Article • Colloids and Surfaces A Physicochemical and Engineering Aspects, February 2008, Elsevier

    S.K. Sadrnezhaad

  119. Synthesis of Fe3O4 Nanoparticles Prepared by Various Surfactants and Studying their Characterizations

    Article • Defect and Diffusion Forum, February 2008, Trans Tech Publications

    S.K. Sadrnezhaad

  120. NiO Nanoparticles Synthesis by Chemical Precipitation and Effect of Applied Surfactant on Distribution of Particle Size

    Article • Journal of Nanomaterials, January 2008, Wiley

    S.K. Sadrnezhaad

  121. Two‐Step Sintering of Nanocrystalline ZnO Compacts: Effect of Temperature on Densification and Grain Growth

    Article • Journal of the American Ceramic Society, December 2007, Wiley

    S.K. Sadrnezhaad

  122. Kinetics of TSCD zinc oxide nano-layer growth by modified diffuse-interface model

    Article • Ceramics International, December 2007, Elsevier

    S.K. Sadrnezhaad

  123. Self-assembled dahlia-like cadmium hydrogen phosphate hydrate nanostructures as templates for cadmium hydroxyapatite hexagonal prisms

    Article • Journal of Crystal Growth, November 2007, Elsevier

    S.K. Sadrnezhaad

  124. Interfacial energy determination of nano-scale precipitates by CALPHAD description of Gibbs–Thomson effect

    Article • Journal of Materials Science, November 2007, Springer Science + Business Media

    S.K. Sadrnezhaad

  125. Sonochemical preparation of TiO2 nanoparticles

    Article • Materials Letters, September 2007, Elsevier

    S.K. Sadrnezhaad

  126. Prediction of the effect of vacuum sintering conditions on porosity and hardness of porous NiTi shape memory alloy using ANFIS

    Article • Computational Materials Science, September 2007, Elsevier

    S.K. Sadrnezhaad

  127. Polypyrrole/multiwall carbon nanotube nanocomposites electropolymerized on copper substrate

    Article • Materials Letters, September 2007, Elsevier

    S.K. Sadrnezhaad

  128. Electron Beam‐Induced “Nanocalcination” of Boehmite Nanostrips to Mesoporous α‐Alumina Phase

    Article • Journal of the American Ceramic Society, August 2007, Wiley

    S.K. Sadrnezhaad

  129. A simple particulate sol–gel route to synthesize nanostructural TiO2–Ta2O5 binary oxides and their characteristics

    Article • Materials Science and Engineering B, August 2007, Elsevier

    S.K. Sadrnezhaad

  130. Water adsorption in the organic phase for the D2EHPA–kerosene/water and aqueous Zn2+, Co2+, Ni2+ sulphate systems

    Article • Hydrometallurgy, August 2007, Elsevier

    S.K. Sadrnezhaad

  131. Sputter alloying of Ni, Ti and Hf for fabrication of high temperature shape memory thin films

    Article • Materials Science and Technology, August 2007, Taylor & Francis

    S.K. Sadrnezhaad

  132. Studies on synthesis of alumina nanopowder from synthetic Bayer liquor

    Article • Materials Research Bulletin, June 2007, Elsevier

    S.K. Sadrnezhaad

  133. Improving the electrical conductance of chemically deposited zinc oxide thin films by Sn dopant

    Article • Materials Science and Engineering B, June 2007, Elsevier

    S.K. Sadrnezhaad

  134. Gas sensing behavior of nanostructured sensors based on tin oxide synthesized with different methods

    Article • Materials Science and Engineering B, May 2007, Elsevier

    S.K. Sadrnezhaad

  135. Effect of Al Antioxidant on the Rate of Oxidation of Carbon in MgO–C Refractory

    Article • Journal of the American Ceramic Society, January 2007, Wiley

    S.K. Sadrnezhaad

  136. Optimum temperature for recovery and recrystallization of 52Ni48Ti shape memory alloy

    Article • Materials & Design (1980-2015), January 2007, Elsevier

    S.K. Sadrnezhaad

  137. Nanopowder synthesis of zinc oxide via solochemical processing

    Article • Materials & Design (1980-2015), January 2007, Elsevier

    S.K. Sadrnezhaad

  138. Breakthrough curves for adsorption and elution of rhenium in a column ion exchange system

    Article • Hydrometallurgy, January 2007, Elsevier

    S.K. Sadrnezhaad

  139. Highly textured ZnO thin films: An economical fabrication, doping by Mn2+ and Sn2+ and approachment for optical devices

    Article • Materials & Design (1980-2015), January 2007, Elsevier

    S.K. Sadrnezhaad

  140. Powder Metallurgical Fabrication and Characterization of Nanostructured Porous NiTi Shape-Memory Alloy

    Article • Materials and Manufacturing Processes, December 2006, Taylor & Francis

    S.K. Sadrnezhaad

  141. Alumina Nanopowder Production from Synthetic Bayer Liquor

    Article • Journal of the American Ceramic Society, November 2006, Wiley

    S.K. Sadrnezhaad

  142. Hydrometallurgical treatment of tailings with high zinc content

    Article • Hydrometallurgy, July 2006, Elsevier

    S.K. Sadrnezhaad

  143. The effect of addition of Tiron as a surfactant on the microstructure of chemically deposited zinc oxide

    Article • Materials Science and Engineering B, March 2006, Elsevier

    S.K. Sadrnezhaad

  144. Effects of substrate material and annealing temperature on morphology of zinc oxide films

    Article • Materials Science and Technology, March 2006, Taylor & Francis

    S.K. Sadrnezhaad

  145. Oxidation Mechanism of C in MgO–C Refractory Bricks

    Article • Journal of the American Ceramic Society, February 2006, Wiley

    S.K. Sadrnezhaad

  146. Property Change During Fixtured Sintering of NiTi Memory Alloy

    Article • Materials and Manufacturing Processes, January 2006, Taylor & Francis

    S.K. Sadrnezhaad

  147. Growth and characterization of TixNi1−x shape memory thin films using simultaneous sputter deposition from separate elemental targets

    Article • Thin Solid Films, November 2005, Elsevier

    S.K. Sadrnezhaad

  148. Microstructural Investigation of Hard Phases in As-Cast Ni-Ti Memory Alloy

    Article • Practical Metallography, September 2005, Carl Hanser Verlag

    S.K. Sadrnezhaad

  149. Binary and ternary NiTi-based shape memory films deposited by simultaneous sputter deposition from elemental targets

    Article • Journal of Vacuum Science & Technology A Vacuum Surfaces and Films, September 2005, American Vacuum Society

    S.K. Sadrnezhaad

  150. Synergistic effect of Cyanex 272 and Cyanex 302 on separation of cobalt and nickel by D2EHPA

    Article • Hydrometallurgy, June 2005, Elsevier

    S.K. Sadrnezhaad

  151. Effect of Mechanical Alloying and Sintering on Ni–Ti Powders

    Article • Materials and Manufacturing Processes, December 2004, Taylor & Francis

    S.K. Sadrnezhaad

  152. Effects of VIM frequency on chemical composition, homogeneity and microstructure of NiTi shape memory alloy

    Article • Materials Science and Technology, May 2004, Taylor & Francis

    S.K. Sadrnezhaad

  153. Thermodynamics of extraction of Re O−4 from aqueous sulfuric acid media with Tri-n-butyl phosphate dissolved in kerosene

    Article • Metallurgical and Materials Transactions B, February 2001, Springer Science + Business Media

    S.K. Sadrnezhaad

  154. Thermodynamics of extraction of MoO42− from aqueous sulfuric acid media with TBP dissolved in kerosene

    Article • Hydrometallurgy, April 2000, Elsevier

    S.K. Sadrnezhaad

  155. Thermomechanical Study of Combustion Synthesized Ti-Ni Shape Memory Alloy

    Article • Materials and Manufacturing Processes, November 1997, Taylor & Francis

    S.K. Sadrnezhaad

  156. Heat Treatment of Ni-Ti Alloy for Improvement of Shape Memory Effect

    Article • Materials and Manufacturing Processes, January 1997, Taylor & Francis

    S.K. Sadrnezhaad