All Stories

  1. Model-Based Process Optimization for the Production of Macrolactin D by Paenibacillus polymyxa

    Article • Processes, June 2020, MDPI AG

    Rudibert King

  2. Minimization of Pressure Fluctuations in an Axial Turbine Stage Under Periodic Inflow Conditions

    Article • August 2019, American Institute of Aeronautics and Astronautics (AIAA)

    Rudibert King

  3. A Testrig to evaluate Turbine Performance and Operational Strategies under pulsating Inflow Conditions

    Article • August 2019, American Institute of Aeronautics and Astronautics (AIAA)

    Rudibert King, Markus Herbig

  4. Planungsadaption und Aktivierungsschranken zur Abstimmung von vertikal kooperierenden Fahrerassistenzsystemen

    Article • at - Automatisierungstechnik, July 2019, De Gruyter

    Samuel Schacher, Rudibert King

  5. Optimal Control for Firing Synchronization in an Annular Pulsed Detonation Combustor Mockup by Mixed-Integer Programming

    Article • January 2019, American Institute of Aeronautics and Astronautics (AIAA)

    Rudibert King

  6. Modelling of Fuel Transport for a Shockless Explosion Combustion Process

    Article • January 2019, American Institute of Aeronautics and Astronautics (AIAA)

    Rudibert King

  7. Alleviating Unsteady Aerodynamic Loads with Closed-Loop Flow Control

    Article • AIAA Journal, June 2018, American Institute of Aeronautics and Astronautics (AIAA)

    Rudibert King, Professor David R Williams

  8. Online low-field NMR spectroscopy for process control of an industrial lithiation reaction—automated data analysis

    Article • Analytical and Bioanalytical Chemistry, April 2018, Springer Science + Business Media

    Rudibert King

  9. Personalisierbare Geschwindigkeitsprofile für subjektiv optimale automatische Fahrfunktionen

    Article • at - Automatisierungstechnik, January 2018, De Gruyter

    Rudibert King, Samuel Schacher

  10. A hybrid approach for bioprocess state estimation using NIR spectroscopy and a sigma-point Kalman filter

    Article • Journal of Process Control, November 2017, Elsevier

    Rudibert King

  11. Multivariable Closed-Loop Active Flow Control of a Compressor Stator Cascade

    Article • AIAA Journal, October 2017, American Institute of Aeronautics and Astronautics (AIAA)

    Rudibert King

  12. Comparison of Conventional and Repetitive MPC with Application to a Periodically Disturbed Compressor Stator Vane Flow * *The authors gratefully acknowledge the support by the Deutsche Forschungsgemeinschaft (DFG) as part of the Collaborative Research ...

    Article • IFAC-PapersOnLine, July 2017, Elsevier

    Rudibert King

  13. “Click” analytics for “click” chemistry – A simple method for calibration–free evaluation of online NMR spectra

    Article • Journal of Magnetic Resonance, April 2017, Elsevier

    Rudibert King

  14. Rapid process synthesis supported by a unified modular software framework

    Article • Engineering in Life Sciences, February 2017, Wiley

    Rudibert King

  15. State estimation for reactive Euler equation by Kalman Filtering

    Article • CEAS Aeronautical Journal, January 2017, Springer Science + Business Media

    Rudibert King

  16. Closed-loop active flow control of a non-steady flow field in a highly-loaded compressor cascade

    Article • CEAS Aeronautical Journal, December 2016, Springer Science + Business Media

    Rudibert King

  17. Online Optimization Applied to a Shockless Explosion Combustor

    Article • Processes, November 2016, MDPI AG

    Rudibert King

  18. Shockless Explosion Combustion: Experimental Investigation of a New Approximate Constant Volume Combustion Process

    Article • Journal of Engineering for Gas Turbines and Power, September 2016, ASME International

    Rudibert King

  19. Application of Artificial Neural Networks for Misfiring Detection in an Annular Pulsed Detonation Combustor Mockup

    Article • June 2016, ASME International

    Rudibert King

  20. Constrained Repetitive Model Predictive Control Applied to an Unsteady Compressor Stator Vane Flow

    Article • June 2016, ASME International

    Rudibert King

  21. Shockless Explosion Combustion: Experimental Investigation of a New Approximate Constant Volume Combustion Process

    Article • June 2016, ASME International

    Rudibert King

  22. Modelling the production of soluble hydrogenase in Ralstonia eutropha by on-line optimal experimental design**This work was supported by the DFG in the framework of the cluster of excellence UniCat.

    Article • IFAC-PapersOnLine, January 2016, Elsevier

    Rudibert King

  23. On-line monitoring of substrates and biomass using near-infrared spectroscopy and model-based state estimation for enzyme production by S. cerevisiae

    Article • IFAC-PapersOnLine, January 2016, Elsevier

    Rudibert King

  24. Ein schneller Entwurf von Fed-Batch-Kultivierungen durch robuste multimodellbasierte Optimierung

    Article • Chemie Ingenieur Technik, November 2015, Wiley

    Rudibert King

  25. State Estimation for the Homogeneous 1-D Euler Equation by Unscented Kalman Filtering

    Article • October 2015, ASME International

    Rudibert King

  26. An Annular Pulsed Detonation Combustor Mockup: System Identification and Misfiring Detection

    Article • Journal of Engineering for Gas Turbines and Power, October 2015, ASME International

    Rudibert King

  27. Iterative Learning Active Flow Control Applied to a Compressor Stator Cascade With Periodic Disturbances

    Article • Journal of Turbomachinery, August 2015, ASME International

    Rudibert King

  28. Toward Microbioreactor Arrays

    Article • August 2015, SAGE Publications

    Rudibert King

  29. Adaptive Control of Mixture Profiles for a Combustion Tube

    Article • June 2015, ASME International

    Rudibert King

  30. An Annular Pulsed Detonation Combustor Mockup: System Identification and Misfiring Detection

    Article • June 2015, ASME International

    Rudibert King

  31. Closed-Loop Active Flow Control of the Wake of a Compressor Blade by Trailing-Edge Blowing

    Article • June 2015, ASME International

    Rudibert King

  32. Iterative Learning Active Flow Control Applied to a Compressor Stator Cascade With Periodic Disturbances

    Article • June 2015, ASME International

    Rudibert King

  33. Dynamic hysteresis control of lift on a pitching wing

    Article • Experiments in Fluids, May 2015, Springer Science + Business Media

    Rudibert King

  34. Experimental Validation of Robust Process Design and Control Based on Gaussian Mixture Densities∗∗A version in German language of this contribution has been presented in “at Automatisierungstechnik 68, Issue 1, 2014, Page 14-22”.

    Article • IFAC-PapersOnLine, January 2015, Elsevier

    Rudibert King

  35. Model-based control to maximise biomass and PHB in the autotrophic cultivation of Ralstonia eutropha

    Article • IFAC-PapersOnLine, January 2015, Elsevier

    Rudibert King

  36. Model-Based Detection of Misfirings in an Annular Burner Mockup

    Article • January 2015, Springer Science + Business Media

    Rudibert King

  37. The Cell Factory Aspergillus Enters the Big Data Era: Opportunities and Challenges for Optimising Product Formation

    Article • January 2015, Springer Science + Business Media

    Rudibert King

  38. Comparison of Iterative Learning and Repetitive Control Applied to a Compressor Stator Cascade

    Article • January 2015, Springer Science + Business Media

    Rudibert King

  39. Linear parameter-varying active flow control for a 3D bluff body exposed to cross-wind gusts

    Article • June 2014, American Institute of Aeronautics and Astronautics (AIAA)

    Rudibert King

  40. Experimentelle Validierung von robuster Prozessplanung und -regelung mit Gauß'schen Mischdichten

    Article • at - Automatisierungstechnik, January 2014, De Gruyter

    Rudibert King

  41. Automatic identification of structured process models based on biological phenomena detected in (fed-)batch experiments

    Article • Bioprocess and Biosystems Engineering, December 2013, Springer Science + Business Media

    Rudibert King

  42. Active compliant wall for skin friction reduction

    Article • International Journal of Heat and Fluid Flow, December 2013, Elsevier

    Rudibert King

  43. Hybrid transition control approach for plasma actuators

    Article • Experiments in Fluids, October 2013, Springer Science + Business Media

    Rudibert King

  44. Flight and Wind-Tunnel Tests of Closed-Loop Active Flow Control

    Article • Journal of Aircraft, September 2013, American Institute of Aeronautics and Astronautics (AIAA)

    Rudibert King

  45. Combined Feedback–Feedforward Control of Wind Turbines Using State-Constrained Model Predictive Control

    Article • IEEE Transactions on Control Systems Technology, July 2013, Institute of Electrical & Electronics Engineers (IEEE)

    Rudibert King

  46. Identification of Surrogate Control Variables for a Robust Active Flow Controller of an Experimental High Speed Stator Cascade

    Article • June 2013, ASME International

    Rudibert King

  47. On the need of nonlinear control for efficient model-based wake stabilization

    Article • Theoretical and Computational Fluid Dynamics, March 2013, Springer Science + Business Media

    Rudibert King

  48. Laminar flow control with distributed surface actuation: damping Tollmien-Schlichting waves with active surface displacement

    Article • Experiments in Fluids, March 2013, Springer Science + Business Media

    Rudibert King

  49. Active Transition Delay by Spatial Surface Actuation with Model Predictive Control

    Article • January 2013, Springer Science + Business Media

    Rudibert King

  50. Influence of Periodic-Blowing Actuators on the Wake and the Total Drag of Generic 3D Car Models

    Article • International Journal of Flow Control, December 2012, Portico

    Rudibert King

  51. Feedback control of unstable thermoacoustic modes in an annular Rijke tube

    Article • Control Engineering Practice, August 2012, Elsevier

    Rudibert King

  52. Advanced algorithms for gradient estimation in one- and two-parameter extremum seeking controllers

    Article • Journal of Process Control, April 2012, Elsevier

    Rudibert King

  53. Learning from Dolphin Skin – Drag Reduction by Active Delay of Transition: Flow Control by Distributed Wall Actuation

    Article • January 2012, Springer Science + Business Media

    Rudibert King

  54. Comparison of two nonlinear model predictive control methods and implementation on a laboratory three tank system

    Article • December 2011, Institute of Electrical & Electronics Engineers (IEEE)

    Rudibert King

  55. Active Separation Control with Pulsed Jets in a Critically Loaded Compressor Cascade

    Article • AIAA Journal, August 2011, American Institute of Aeronautics and Astronautics (AIAA)

    Rudibert King

  56. Closed-Loop Control of Lift for Longitudinal Gust Suppression at Low Reynolds Numbers

    Article • AIAA Journal, August 2011, American Institute of Aeronautics and Astronautics (AIAA)

    Rudibert King

  57. Adaptive Control in an Axial Turbofan: Model-Free Implementation with Short Response Time

    Article • AIAA Journal, July 2011, American Institute of Aeronautics and Astronautics (AIAA)

    Rudibert King

  58. Cymbal type Piezo-Polymer-Composite actuators for active cancellation of flow instabilities on airfoils

    Article • June 2011, Institute of Electrical & Electronics Engineers (IEEE)

    Rudibert King

  59. Piezo-Polymer-Composite Unimorph Actuators for Active Cancellation of Flow Instabilities Across Airfoils

    Article • Journal of Intelligent Material Systems and Structures, January 2011, SAGE Publications

    Rudibert King

  60. Multivariable Control in a Critically Loaded Compressor Cascade

    Article • International Journal of Flow Control, December 2010, Portico

    Rudibert King

  61. Special Issue: Guest Editor's Note

    Article • International Journal of Flow Control, December 2010, Portico

    Rudibert King

  62. Robust Closed-Loop Control on a 2D-High-Lift-Device

    Article • International Journal of Flow Control, June 2010, Portico

    Rudibert King

  63. Control of Tollmien–Schlichting instabilities by finite distributed wall actuation

    Article • Theoretical and Computational Fluid Dynamics, March 2010, Springer Science + Business Media

    Prof. Bernd R Noack, Rudibert King

  64. Robust Control in Turbomachinery Configurations

    Article • January 2010, Springer Science + Business Media

    Prof. Bernd R Noack, Rudibert King

  65. A multiparallel bioreactor for the cultivation of mammalian cells in a 3D-ceramic matrix

    Article • Biotechnology Progress, January 2010, Wiley

    Rudibert King

  66. A software supported compartmental modeling approach for Paenibacillus polymyxa

    Article • IFAC Proceedings Volumes, January 2010, Elsevier

    Rudibert King

  67. An automated approach to build process models by detecting biological phenomena in (fed-)batch experiments

    Article • IFAC Proceedings Volumes, January 2010, Elsevier

    Rudibert King

  68. Strömungsregelung mit flächiger Wandaktuation und Galerkin-MPC-SchemaFlow Control with Distributed Wall Actuation and Galerkin-MPC Scheme

    Article • at - Automatisierungstechnik, January 2010, De Gruyter

    Rudibert King

  69. Turbulence Control Based on Reduced-Order Models and Nonlinear Control Design

    Article • January 2010, Springer Science + Business Media

    Rudibert King

  70. Modeling the Fuel/Air Mixing to Control the Pressure Pulsations and NOx Emissions in a Lean Premixed Combustor

    Article • January 2010, Springer Science + Business Media

    Rudibert King

  71. Closed Loop Blade Tone Control in Axial Turbomachines by Flow Induced Secondary Sources in the Blade Tip Regime

    Article • January 2010, Springer Science + Business Media

    Rudibert King

  72. Unsteady Lift Suppression with a Robust Closed Loop Controller

    Article • January 2010, Springer Science + Business Media

    Rudibert King

  73. Model Predictive Control for a 2D Bluff Body Under Disturbed Flow Conditions

    Article • January 2010, Springer Science + Business Media

    Rudibert King

  74. Application of Active Flow Control on Generic 3D Car Models

    Article • January 2010, Springer Science + Business Media

    Rudibert King

  75. Robust Closed-Loop Lift Control on an Industry-Relevant Civil Aircraft Half Model

    Article • January 2010, Springer Science + Business Media

    Rudibert King

  76. Quality-by-Design Using a Gaussian Mixture Density Approximation of Biological Uncertainties

    Article • IFAC Proceedings Volumes, January 2010, Elsevier

    Rudibert King

  77. Robust Trajectory Planning and Robust NMPC of Processes with Model Uncertainties

    Article • IFAC Proceedings Volumes, January 2010, Elsevier

    Rudibert King

  78. A piezo-actuated closed loop MEMS system for active delay of transition

    Article • June 2009, Institute of Electrical & Electronics Engineers (IEEE)

    Rudibert King

  79. A generalized mean-field model of the natural and high-frequency actuated flow around a high-lift configuration

    Article • Journal of Fluid Mechanics, March 2009, Cambridge University Press

    Rudibert King

  80. Active Flow Control to Improve the Aerodynamic Performance of Axial Turbomachines

    Article • January 2009, ASME International

    Rudibert King

  81. Model Based Control of Emissions and Pulsations in a Premixed Combustor Using Fuel Staging

    Article • January 2009, ASME International

    Rudibert King

  82. Simulation Study of the Robust Closed-Loop Control of a 2D High-Lift Configuration

    Article • January 2009, Springer Science + Business Media

    Rudibert King

  83. Derivative-free optimal experimental design

    Article • Chemical Engineering Science, October 2008, Elsevier

    Rudibert King

  84. Extensions of adaptive slope-seeking for active flow control

    Article • Proceedings of the Institution of Mechanical Engineers Part I Journal of Systems and Control Engineering, August 2008, SAGE Publications

    Rudibert King

  85. Feedback shear layer control for bluff body drag reduction

    Article • Journal of Fluid Mechanics, July 2008, Cambridge University Press

    Prof. Bernd R Noack, Rudibert King

  86. Model based estimation and optimal control of fed-batch fermentation processes for the production of antibiotics

    Article • Chemical Engineering and Processing - Process Intensification, November 2007, Elsevier

    Rudibert King

  87. A new approach for robust model predictive control of biological production processes

    Article • Chemical Engineering Science, September 2007, Elsevier

    Rudibert King

  88. Adaptive Closed-Loop Separation Control on a High-Lift Configuration Using Extremum Seeking

    Article • AIAA Journal, June 2007, American Institute of Aeronautics and Astronautics (AIAA)

    Rudibert King

  89. Robust Multivariable Closed-Loop Control of a Turbulent Backward-Facing Step Flow

    Article • Journal of Aircraft, January 2007, American Institute of Aeronautics and Astronautics (AIAA)

    Rudibert King

  90. Rechnergestützte halbautomatische Modellierung biotechnologischer Prozesse (Semiautomatic Modeling of Biotechnical Processes)

    Article • at - Automatisierungstechnik, January 2007, De Gruyter

    Rudibert King

  91. Robust model predictive control using the Unscented Transformation

    Article • October 2006, Institute of Electrical & Electronics Engineers (IEEE)

    Rudibert King

  92. Robust model predictive control using the unscented transformation

    Article • October 2006, Institute of Electrical & Electronics Engineers (IEEE)

    Rudibert King

  93. Adaptive flow control using slope seeking

    Article • June 2006, Institute of Electrical & Electronics Engineers (IEEE)

    Rudibert King

  94. Ein neuer Ansatz zur robusten Trajektorienplanung und robusten nichtlinearen modellprädiktiven Regelung für Prozesse mit Parameterunsicherheiten (A New Approach for Robust Optimization Based Open- and Closed-Loop Control of Nonlinear Processes)

    Article • at - Automatisierungstechnik, January 2006, De Gruyter

    Rudibert King

  95. Robust control of separated shear flows in simulation and experiment

    Article • Journal of Process Control, September 2005, Elsevier

    Rudibert King

  96. Determination of kinetic parameters for the adsorption of a protein on porous beads using symbolic computation and numerical Laplace inversion

    Article • Chemical Engineering and Processing - Process Intensification, July 2003, Elsevier

    Rudibert King

  97. Regelung aerodynamischer Strömungen am Beispiel einer rückwärts gewandten Stufe (Robust Control of a Backward-Facing Step Flow)

    Article • at - Automatisierungstechnik, January 2002, De Gruyter

    Rudibert King

  98. Qualitative modelling for automatic identification of mathematical models of chemical reaction systems

    Article • Control Engineering Practice, December 2001, Elsevier

    Rudibert King

  99. Qualitative modelling and simulation of chemical reaction systems

    Article • Computers & Chemical Engineering, June 1999, Elsevier

    Rudibert King

  100. A structured mathematical model for a class of organisms: I. Development of a model for Streptomyces tendae and application of model-based control

    Article • Journal of Biotechnology, January 1997, Elsevier

    Rudibert King

  101. A structured mathematical model for a class of organisms: II. Application of the model to other strains

    Article • Journal of Biotechnology, January 1997, Elsevier

    Rudibert King

  102. Optimal feeding strategies by adaptive mesh selection for fed-batch bioprocesses

    Article • Bioprocess Engineering, January 1997, Springer Science + Business Media

    Rudibert King

  103. Are biological processes too complex to model?

    Article • Mathematics and Computers in Simulation, November 1995, Elsevier

    Rudibert King

  104. Characterization of pellet morphology during submerged growth ofStreptomyces tendae by image analysis

    Article • Biotechnology and Bioengineering, January 1992, Wiley

    Rudibert King

  105. Mathematical model for apical growth, septation, and branching of mycelial microorganisms

    Article • Biotechnology and Bioengineering, January 1992, Wiley

    Rudibert King

  106. Measurement and simulation of the morphological development of filamentous microorganisms

    Article • Biotechnology and Bioengineering, January 1992, Wiley

    Rudibert King

  107. Effect of temperature and medium composition on mycelial growth ofStreptomyces tendae in submerged culture

    Article • Journal of Basic Microbiology, January 1992, Wiley

    Rudibert King

  108. Nutritional control of nikkomycin and juglomycin production by Streptomyces tendae in continuous culture

    Article • Applied Microbiology and Biotechnology, January 1992, Springer Science + Business Media

    Rudibert King

  109. Multiple filter methods for detection of hazardous states in an industrial plant

    Article • AIChE Journal, November 1990, Wiley

    Rudibert King

  110. Continuous Mode Interpolation for Control-Oriented Models of Fluid Flow

    Article • Springer Science + Business Media

    Prof. Bernd R Noack, Rudibert King

  111. Feedback Control Applied to the Bluff Body Wake

    Article • Springer Science + Business Media

    Prof. Bernd R Noack, Rudibert King

  112. Active Blade Tone Control in Axial Turbomachines by Flow Induced Secondary Sources in the Blade Tip Regime

    Article • Springer Science + Business Media

    Rudibert King

  113. Drag reduction by closed-loop control of a separated flow over a bluff body with a blunt trailing edge

    Article • Institute of Electrical & Electronics Engineers (IEEE)

    Rudibert King

  114. Nonlinear Flow Control Based on a Low Dimensional Model of Fluid Flow

    Article • Springer Science + Business Media

    Rudibert King

  115. Observers and Feedback Control for Shear Layer Vortices

    Article • Institute of Electrical & Electronics Engineers (IEEE)

    Rudibert King

  116. Wake stabilization using POD Galerkin models with interpolated modes

    Article • Institute of Electrical & Electronics Engineers (IEEE)

    Rudibert King