All Stories

  1. Electrochemical performance of SiCN embedded carbon (SiCN–C) fiber mat electrodes for lithium-ion battery: Electrospinning polysilazane in air or protective atmosphere
  2. Low temperature in situ immobilization of nanoscale fcc and hcp polymorphic nickel particles in polymer-derived Si–C–O–N(H) to promote electrocatalytic water oxidation in alkaline media
  3. Superhydrophobic PA membrane for robust anti-wetting membrane distillation to water reclamation from textile wastewater
  4. Water reclamation via membrane distillation applied to textile dye wastewater using a commercial poly(vinylidene fluoride) membrane
  5. Improvement of membrane hydrophobicity by one-step electrospraying for water recovery from textile dye solutions by membrane distillation
  6. Wettability tuning of natural rubber/polyvinylpyrrolidone electrospun nonwoven mats
  7. Triethylene glycol recovery by an energetically intensified thermosyphon-assisted falling film distillation unit: Experimental assessment on a pilot-scale unit and in-silico comparison with a conventional column from natural gas processing
  8. Design and Synthesys of Highly Stretchable and Tough Adhesive Hydrogels for Dry and Wet Biomedical Applications
  9. Evaluating the bioenergy potential of cupuassu shell through pyrolysis kinetics, thermodynamic parameters of activation, and evolved gas analysis with TG/FTIR technique
  10. Investigation on prospective bioenergy from pyrolysis of butia seed waste using TGA-FTIR: Assessment of kinetic triplet, thermodynamic parameters and evolved volatiles
  11. Membrane distillation for the recovery textile wastewater: Influence of dye concentration
  12. Statistical optimization of polysilazane-derived ceramic: Electrospinning with and without organic polymer as a spinning aid for manufacturing thinner fibers
  13. Potential of macauba endocarp (Acrocomia aculeate) for bioenergy production: Multi-component kinetic study and estimation of thermodynamic parameters of activation
  14. Nanocomposites production of polystyrene/silver obtained by embedding silver nanoparticles in situ with styrene polymerization
  15. Latex and natural rubber: recent advances for biomedical applications
  16. Prospecting pecan nutshell pyrolysis as a source of bioenergy and bio-based chemicals using multicomponent kinetic modeling, thermodynamic parameters estimation, and Py-GC/MS analysis
  17. Prospection of catole coconut (Syagrus cearensis) as a new bioenergy feedstock: Insights from physicochemical characterization, pyrolysis kinetics, and thermodynamics parameters
  18. Xanthan gum-based film-forming suspension containing essential oils: Production and in vitro antimicrobial activity evaluation against mastitis-causing microorganisms
  19. A Perspective Review on the Application of Polyacrylonitrile‐Based Supports for Laccase Immobilization
  20. Flexible and Porous Nonwoven SiCN Ceramic Material via Electrospinning of an Optimized Silazane Solution
  21. Pyrolysis of cocoa shell and its bioenergy potential: evaluating the kinetic triplet, thermodynamic parameters, and evolved gas analysis using TGA-FTIR
  22. Smart polymeric materials applied to industry 4.0: A review on electrochromic textiles
  23. Membrane distillation for recovery of textile wastewaters: Determination of operational conditions with PTFE membrane and high dye concentrations
  24. Polyimide as carbon and ceramic polysilazane precursors to obtain high carbon content ceramic for high-temperature applications
  25. Influence of dye class on the comparison of direct contact and vacuum membrane distillation applied to remediation of dyeing wastewater
  26. Direct contact membrane distillation applied to wastewaters from different stages of the textile process
  27. ENERGY AND EXERGETIC EVALUATION OF THE MULTICOMPONENT SEPARATION OF PETROCHEMICAL NAPHTHA IN FALLING FILM DISTILLATION COLUMNS
  28. Ceramic membranes applied to membrane distillation: A comprehensive review
  29. Tape casting of preceramic polymers toward advanced ceramics: A review
  30. Direct Contact Membrane Distillation Applied to Colored Reactive or Disperse Dye Solutions
  31. OPTIMIZATION OF PRESSURE-SWING DISTILLATION FOR ANHYDROUS ETHANOL PURIFICATION BY THE SIMULATED ANNEALING ALGORITHM
  32. Falling film distillation column with heat transfer by means of a vapor chamber – part I: isothermal operation
  33. Nonlinear multivariable tracking control: application to an ethanol process
  34. Dye synthetic solution treatment by direct contact membrane distillation using commercial membranes
  35. Synthesis and characterization of cellulose acetate from royal palm tree agroindustrial waste
  36. Falling film distillation column with heat transfer by means of a vapor chamber. Part II: operation with a temperature profile
  37. Viscosity monitoring study of the kinetics of aqueous-medium N -vinylpyrrolidone free-radical polymerization
  38. Influence of different textile fibers on characterization of dyeing wastewater and final effluent
  39. Polymer-Derived Ceramics with engineered mesoporosity: From design to application in catalysis
  40. Experimental evaluation of the separation of aromatic compounds using falling film distillation on a pilot scale
  41. Polystyrene recycling processes by dissolution in ethyl acetate
  42. Photosensible Spiropyrans used as Thermal Sensor
  43. Chemical resistance of core-shell particles (PS/PMMA) polymerized by seeded suspension
  44. Influence of porous structures on O 2 flux of BSCF asymmetric membranes
  45. Influence of the Location of the Internal Temperature Control Loop on the Performance of the Dual Temperature Control for Feed Temperature Disturbance
  46. A novel PAN/silazane hybrid polymer for processing of carbon-based fibres with extraordinary oxidation resistance
  47. Synthesis of fluorine-modified polysilazanes via Si–H bond activation and their application as protective hydrophobic coatings
  48. Experimental and CFD Study of a Vertically Stirred Tubular Reactor Designed for Suspension Polymerization Reactions
  49. Influence of stabilizer additives on thermochromic coating for temperature monitoring
  50. Application of hybrid organic/inorganic polymers as coatings on metallic substrates
  51. Influence of process parameters and scalability of the semi-batch production of functionalized silver nanoparticles
  52. Supercritical fluid extraction of Drimys angustifolia Miers: Experimental data and identification of the dynamic behavior of extraction curves using neural networks based on wavelets
  53. Dispersion polymerization of methyl methacrylate in supercritical carbon dioxide using vinyl terminated poly(dimethylsiloxane)
  54. PREDICTIVE CONTROL OF A BATCH POLYMERIZATION SYSTEM USING A FEEDFORWARD NEURAL NETWORK WITH ONLINE ADAPTATION BY GENETIC ALGORITHM
  55. A Systematic Procedure to Develop a Capillary Electrophoresis Method Using a Minimal Experimental Data
  56. Performance of reverse osmosis and nanofiltration membranes in the fractionation and retention of patchouli essential oil
  57. A novel organic-inorganic PMMA/polysilazane hybrid polymer for corrosion protection
  58. Robust estimation of thermodynamic parameters (ΔH, ΔS and ΔCp) for prediction of retention time in gas chromatography – Part I (Theoretical)
  59. Robust estimation of thermodynamic parameters (ΔH, ΔS and ΔCp) for prediction of retention time in gas chromatography – Part II (Application)
  60. Characterization of the mucilage extracted from jaracatiá ( Carica quercifolia (A. St. Hil.) Hieron)
  61. Fast and accurate numerical method for predicting gas chromatography retention time
  62. Dynamic Study of Distillation Column Operated with Tray Heat Source Combined with Reboiler
  63. SB-S Core-Shell Particles in Semicontinuous Seeded Emulsion Polymerization and their use as Impact Modifier
  64. Biodegradable Duo-functional Active Film: Antioxidant and Antimicrobial Actions for the Conservation of Beef
  65. Synthesis and Characterization of Silver Nanoparticles Produced with a Bifunctional Stabilizing Agent
  66. Adsorption of anthocyanins using clay–polyethylene nanocomposite particles
  67. Mixed ionic-electronic conducting membranes (MIEC): composition, preparation, and performance.
  68. Distributed Heat Supply for Distillation Control to Reduce Feed Composition Disturbance Effects
  69. Current developments of mixed conducting membranes on porous substrates
  70. Preparation of PMMA/hBN composite coatings for metal surface protection
  71. Expansion of core-shell PS/PMMA particles
  72. Supercritical fluid extraction of hernandulcin from Lippia dulcis Trev.
  73. Influence of Semi-Batch Operations on Morphological Properties of Polystyrene Made in Suspension Polymerization
  74. Modeling techniques and processes control application based on Neural Networks with on-line adjustment using Genetic Algorithms
  75. Influence of experimental conditions on the incorporation of water droplets in polystyrene
  76. Simulação numérica aplicada para avaliar o efeito da pré-polimerização no comportamento de reatores tubulares
  77. Adsorption of natural dyes on clay fixed on polymers
  78. Mathematical modeling of the membrane separation of nutmeg essential oil and dense CO2
  79. Performance of reverse osmosis membranes in the separation of supercritical CO2 and essential oils
  80. Use of reverse osmosis membranes for the separation of lemongrass essential oil and supercritical CO2