All Stories

  1. Modeling of Triphenyl Phosphate Surfactant Enhanced Drying of Polystyrene/p-Xylene Coatings Using Artificial Neural Network

    Article • Processes, January 2024, MDPI AG

    Dr Raj Kumar Arya

  2. Natural Fibers Composites: Origin, Importance, Consumption Pattern, and Challenges

    Article • Journal of Composites Science, December 2023, MDPI AG

    Dr Raj Kumar Arya

  3. Enzyme-assisted turmeric oil extraction from turmeric rhizomes

    Article • November 2023, Polish Academy of Sciences Chancellery

    Dr Raj Kumar Arya

  4. Low-cost removal of basic red 9 using cow dung ash

    Article • November 2023, Polish Academy of Sciences Chancellery

    Dr Raj Kumar Arya

  5. Advancements in Doping Strategies for Enhanced Photocatalysts and Adsorbents in Environmental Remediation

    Article • Technologies, October 2023, MDPI AG

    Dr Raj Kumar Arya

  6. On the extremum dissipation for steady state incompressible flow past a sphere at low Reynolds number

    Article • International Journal of Chemical Reactor Engineering, July 2023, De Gruyter

    Dr Raj Kumar Arya

  7. Polymer Coated Functional Catalysts for Industrial Applications

    Article • Polymers, April 2023, MDPI AG

    Dr Raj Kumar Arya

  8. Surfactant-Enhanced Extraction of Lutein from Marigold Petals using an Aqueous Two-Phase System

    Article • Separations, February 2023, MDPI AG

    Dr Raj Kumar Arya

  9. Particle preparation of pharmaceutical compounds using supercritical antisolvent process: current status and future perspectives

    Article • Drug Delivery and Translational Research, December 2022, Springer Science + Business Media

    Dr Raj Kumar Arya

  10. A study on residual solvent, crystallinity and thermal properties of poly(styrene)-poly(methyl methacrylate)-toluene coatings

    Article • Progress in Organic Coatings, December 2022, Elsevier

    Dr Raj Kumar Arya

  11. Computer Vision-Based Approach for Automatic Detection of Dairy Cow Breed

    Article • Electronics, November 2022, MDPI AG

    Dr Raj Kumar Arya

  12. On the Validity of a Linearity Axiom in Diffusion and Heat Transfer

    Article • Coatings, October 2022, MDPI AG

    Dr Raj Kumar Arya

  13. Recent innovation in clean conversion technologies, carbon capture and utilization, advance treatment for energy, air, water, biomass and soil for green and sustainable development 2021 (ICheEC 2021)

    Article • Environmental Science and Pollution Research, October 2022, Springer Science + Business Media

    Dr Raj Kumar Arya

  14. Recent progress and challenges in photocatalytic water splitting using layered double hydroxides (LDH) based nanocomposites

    Article • International Journal of Hydrogen Energy, October 2022, Elsevier

    Dr Raj Kumar Arya

  15. Liquid antisolvent crystallization of pharmaceutical compounds: current status and future perspectives

    Article • Drug Delivery and Translational Research, August 2022, Springer Science + Business Media

    Dr Raj Kumar Arya

  16. Utilization of agricultural waste biomass and recycling toward circular bioeconomy

    Article • Environmental Science and Pollution Research, May 2022, Springer Science + Business Media

    Dr Raj Kumar Arya

  17. On the Validity of Onsager Reciprocal Relations (ORR) for Heat Transfer in Anisotropic Solids

    Article • Axioms, February 2022, MDPI AG

    Dr Raj Kumar Arya

  18. 100 Glorious Years of Chemical Engineering & Technology: International Chemical Engineering Conference 2021 (ICHEEC)

    Article • Chemical Engineering & Technology, February 2022, Wiley

    Dr Raj Kumar Arya

  19. Removal of doxycycline hydrochloride from aqueous solution by rice husk ash using response surface methodology and disposability study

    Article • Environmental Science and Pollution Research, February 2022, Springer Science + Business Media

    Dr Raj Kumar Arya

  20. Comparative Study of Two Identical Industrial Digesters Using Radiotracer‐Based Residence Time Distribution Measurement

    Article • Chemical Engineering & Technology, February 2022, Wiley

    Dr Raj Kumar Arya

  21. Heat Exchanger Network Design Using MATLAB

    Article • Chemical Engineering & Technology, February 2022, Wiley

    Dr Raj Kumar Arya

  22. Post-fabrication structural changes and enhanced photodegradation activity of semiconductors@zeolite composites towards noxious contaminants

    Article • Chemosphere, February 2022, Elsevier

    Dr Raj Kumar Arya

  23. PANI-Based Hydrogen Sulfide Gas Sensors

    Article • Coatings, January 2022, MDPI AG

    Dr Raj Kumar Arya

  24. Transient Modeling and Simulation of a Multiple‐Stage Evaporator in the Paper Industry

    Article • Chemical Engineering & Technology, January 2022, Wiley

    Dr Raj Kumar Arya

  25. Insight into biosorptive uptake of fluoride by chemically activated biochar: experimental modeling and parametric optimization

    Article • Biomass Conversion and Biorefinery, January 2022, Springer Science + Business Media

    Dr Raj Kumar Arya

  26. Experimental investigation of different-shaped microwave-heated potatoes: thermal and quality characteristics analysis for food preservation

    Article • Environmental Science and Pollution Research, January 2022, Springer Science + Business Media

    Dr Raj Kumar Arya

  27. A theoretical and mathematical study on the importance of petroleum derivatives in the production of sanitizer based products

    Article • Materials Today Proceedings, January 2022, Elsevier

    Dr Raj Kumar Arya

  28. Towards a Mathematical Model for the Viral Progression in the Pharynx

    Article • Healthcare, December 2021, MDPI AG

    Dr Raj Kumar Arya

  29. Modeling of Surfactant-Enhanced Drying of Poly(styrene)-p-xylene Polymeric Coatings Using Machine Learning Technique

    Article • Coatings, December 2021, MDPI AG

    Dr Raj Kumar Arya

  30. On the multi-component diffusion in the linear region of the extended thermodynamics framework

    Article • The European Physical Journal Plus, November 2021, Springer Science + Business Media

    Dr Raj Kumar Arya

  31. Glassy Polymers—Diffusion, Sorption, Ageing and Applications

    Article • Coatings, August 2021, MDPI AG

    Dr Raj Kumar Arya

  32. Glassy Polymers – Diffusion, Sorption, Aging, and Applications

    Article • July 2021, MDPI AG

    Dr Raj Kumar Arya

  33. Effect of surfactant on drying and rheology of poly (vinyl alcohol) – water coatings

    Article • Drying Technology, June 2021, Taylor & Francis

    Dr Raj Kumar Arya

  34. Designing of biodegradable polycaprolactone: Binary and ternary coatings to minimize the defects and cost of solvent(s)

    Article • Journal of Applied Polymer Science, April 2021, Wiley

    Dr Raj Kumar Arya

  35. Influence of plasticizer (triphenyl phosphate) loading on drying of binary coatings: Poly(styrene)-p-xylene coatings

    Article • Progress in Organic Coatings, January 2021, Elsevier

    Dr Raj Kumar Arya

  36. Catalytic performance of modified beta zeolite on the synthesis of styrene and xylene: a kinetic study

    Article • Indian Chemical Engineer, October 2019, Taylor & Francis

    Dr Raj Kumar Arya

  37. A comprehensive model for the drying of glassy polymer coatings: The low solvent concentration area of the system poly(styrene)/P-xylene

    Article • Progress in Organic Coatings, October 2019, Elsevier

    Dr Raj Kumar Arya

  38. Effect of molecular weight on residual solvent and other parameters in polymer-polymer-solvent coatings: Poly(Styrene)-poly(methyl methacrylate)-ethylbenzene system

    Article • Progress in Organic Coatings, September 2019, Elsevier

    Dr Raj Kumar Arya

  39. A unified model for the drying of glassy polymer coatings

    Article • Progress in Organic Coatings, September 2019, Elsevier

    Dr Raj Kumar Arya

  40. Depth profile study of poly(styrene) – poly(methyl methacrylate) – tetrahydrofuran coatings

    Article • Progress in Organic Coatings, September 2019, Elsevier

    Dr Raj Kumar Arya

  41. Effect of molecular weight on morphology and thermal properties of poly(styrene)-poly(methyl methacrylate)-ethylbenzene coatings

    Article • Progress in Organic Coatings, July 2019, Elsevier

    Dr Raj Kumar Arya

  42. Quaternary polymeric coatings as alternative to minimize the use of single solvent: Poly(methyl methacrylate) – ethylbenzene – toluene – acetone system

    Article • Progress in Organic Coatings, July 2019, Elsevier

    Dr Raj Kumar Arya

  43. Experimental designing of polymer-polymer-solvent coatings: Poly(styrene)-poly(ethylene glycol)-chlorobenzene coating

    Article • Progress in Organic Coatings, March 2019, Elsevier

    Dr Raj Kumar Arya

  44. Optimization of sodium dodecyl sulphate loading in poly(vinyl alcohol)-water coatings

    Article • Progress in Organic Coatings, February 2019, Elsevier

    Dr Raj Kumar Arya

  45. Quaternary polymeric coating as an alternative to minimize the use of costly or toxic solvents: Poly(styrene)-ethylbenzene-toluene-p-xylene system

    Article • Progress in Organic Coatings, February 2019, Elsevier

    Dr Raj Kumar Arya

  46. Drying induced phase separation in poly(styrene)–poly(ethylene glycol)–chlorobenzene system

    Article • Journal of Porous Materials, December 2018, Springer Science + Business Media

    Dr Raj Kumar Arya

  47. Crosslinked polymer doped binary coatings for corrosion protection

    Article • Progress in Organic Coatings, December 2018, Elsevier

    Dr Raj Kumar Arya

  48. Surfactant enhanced drying of waterbased poly(vinyl alcohol) coatings

    Article • Progress in Organic Coatings, December 2018, Elsevier

    Dr Raj Kumar Arya

  49. Meta-atoms and artificially engineered materials for antenna applications

    Article • November 2018, the Institution of Engineering and Technology (the IET)

    Dr Raj Kumar Arya

  50. Photocatalytic and antibacterial potential of silver nanoparticles derived from pineapple waste: process optimization and modeling kinetics for dye removal

    Article • Applied Nanoscience, September 2018, Springer Science + Business Media

    Dr Raj Kumar Arya

  51. Laplace Transform Treatment for Chemical Engineering Systems: Whether to Use 0− or 0+?

    Article • Chemical Engineering & Technology, February 2018, Wiley

    Dr Raj Kumar Arya

  52. Residual solvent study in polymer − polymer — solvent coatings: Poly(styrene) — poly(methyl methacrylate) — tetrahydrofuran coatings

    Article • Progress in Organic Coatings, December 2017, Elsevier

    Dr Raj Kumar Arya

  53. Diffusion in polymeric systems–A review on free volume theory

    Article • Progress in Organic Coatings, October 2017, Elsevier

    Dr Raj Kumar Arya

  54. Adsorption removal of malachite green dye from aqueous solution

    Article • Reviews in Chemical Engineering, May 2017, De Gruyter

    Dr Raj Kumar Arya

  55. Crosslinked polymeric coatings: Preparation, characterization, and diffusion studies

    Article • Progress in Organic Coatings, April 2017, Elsevier

    Dr Raj Kumar Arya

  56. Simplified MATLAB Solution Schemes of Heat Transfer Equations

    Article • Chemical Engineering & Technology, October 2016, Wiley

    Dr Raj Kumar Arya

  57. 3D-Printed Flat Lenses for Microwave Applications

    Article • IET Microwaves Antennas & Propagation, September 2016, the Institution of Engineering and Technology (the IET)

    Dr Shiyu Zhang, Dr Raj Mittra, Dr Raj Kumar Arya

  58. Non-Fickian drying of binary polymeric coatings: Depth profiling study using confocal Raman spectroscopy

    Article • Progress in Organic Coatings, June 2016, Elsevier

    Dr Raj Kumar Arya

  59. Statistical analysis of 3D-printed flat GRIN lenses

    Article • June 2016, Institute of Electrical & Electronics Engineers (IEEE)

    Dr Raj Kumar Arya

  60. Generalized Pinch Analysis Scheme Using MATLAB

    Article • Chemical Engineering & Technology, February 2015, Wiley

    Dr Raj Kumar Arya

  61. Simulation analysis of drying of ternary polymeric solution coatings

    Article • Progress in Organic Coatings, January 2015, Elsevier

    Dr Raj Kumar Arya

  62. Removal of Mercury(II) from Aqueous Solution: A Review of Recent Work

    Article • Separation Science and Technology, December 2014, Taylor & Francis

    Dr Raj Kumar Arya

  63. Design of Binary Polymeric Coatings for Minimizing the Residual Solvent, Part I: Experimentation

    Article • Drying Technology, November 2014, Taylor & Francis

    Dr Raj Kumar Arya

  64. Drying of Multilayer Polymeric Coatings, Part I: An Experimental Study

    Article • Drying Technology, September 2014, Taylor & Francis

    Rahul Dixit, Dr Raj Kumar Arya

  65. Measurement of Concentration Profiles in Thin Film Binary Polymer-Solvent Coatings Using Confocal Raman Spectroscopy: Free Volume Model Validation

    Article • Drying Technology, May 2014, Taylor & Francis

    Dr Raj Kumar Arya

  66. Characterization of Bio-Active Nanoparticles – Bhasma an Indian Ayurvedic Drug

    Article • Indian Journal of Pharmaceutical Education and Research, January 2014, EManuscript Services

    Dr Raj Kumar Arya

  67. Finite element solution of coupled-partial differential and ordinary equations in multicomponent polymeric coatings

    Article • Computers & Chemical Engineering, March 2013, Elsevier

    Dr Raj Kumar Arya

  68. NUMERICALLY EFFICIENT TECHNIQUE FOR METAMATERIAL MODELING

    Article • Progress In Electromagnetics Research, January 2013, The Electromagnetics Academy

    Dr Raj Kumar Arya

  69. Sensitivity analysis of free-volume theory parameters in multicomponent polymer-solvent-solvent systems

    Article • Journal of Power Electronics, December 2012, De Gruyter

    Dr Raj Kumar Arya

  70. Drying of binary thin film polymeric coatings: an experimental study

    Article • Polish Journal of Chemical Technology, December 2012, De Gruyter

    Dr Raj Kumar Arya

  71. Measurement of concentration profiles using confocal Raman spectroscopy in multicomponent polymeric coatings-model validation

    Article • Journal of Applied Polymer Science, October 2012, Wiley

    Dr Raj Kumar Arya

  72. Near-Optimization of Operating Conditions and Residence Times in Multizone Dryers for Polymer Coatings

    Article • Industrial & Engineering Chemistry Research, December 2009, American Chemical Society (ACS)

    Dr Raj Kumar Arya