All Stories

  1. Quasicrystalline Composites by Additive Manufacturing

    Article • Key Engineering Materials, August 2019, Trans Tech Publications

    Dr Sergio Scudino, Dr Prashanth Konda Gokuldoss

  2. Mechanism of formation of fibrous eutectic Si and thermal conductivity of SiC p /Al-20Si composites solidified under high pressure

    Article • Journal of Alloys and Compounds, June 2017, Elsevier

    Dr Prashanth Konda Gokuldoss

  3. Corrosion properties of high-strength nanocrystalline Al 84 Ni 7 Gd 6 Co 3 alloy produced by hot pressing of metallic glass

    Article • Journal of Alloys and Compounds, June 2017, Elsevier

    Dr Prashanth Konda Gokuldoss

  4. Formation of metastable cellular microstructures in selective laser melted alloys

    Article • Journal of Alloys and Compounds, June 2017, Elsevier

    Dr Prashanth Konda Gokuldoss

  5. Selective laser melting of Al-Zn-Mg-Cu: Heat treatment, microstructure and mechanical properties

    Article • Journal of Alloys and Compounds, June 2017, Elsevier

    Dr Prashanth Konda Gokuldoss

  6. Designing a novel functional-structural NiTi/hydroxyapatite composite with enhanced mechanical properties and high bioactivity

    Article • Intermetallics, May 2017, Elsevier

    Jun Tan, Dr Prashanth Konda Gokuldoss

  7. Effect of Si content on the microstructure and properties of Al–Si alloys fabricated using hot extrusion

    Article • Journal of Materials Research, April 2017, Cambridge University Press

    Dr Prashanth Konda Gokuldoss

  8. Is the energy density a reliable parameter for materials synthesis by selective laser melting?

    Article • Materials Research Letters, March 2017, Taylor & Francis

    Dr Prashanth Konda Gokuldoss

  9. Defining the tensile properties of Al-12Si parts produced by selective laser melting

    Article • Acta Materialia, March 2017, Elsevier

    Dr Prashanth Konda Gokuldoss

  10. Microstructure and thermal expansion behavior of Al-50Si synthesized by selective laser melting

    Article • Journal of Alloys and Compounds, March 2017, Elsevier

    Dr Prashanth Konda Gokuldoss

  11. Rapid fabrication of function-structure-integrated NiTi alloys: Towards a combination of excellent superelasticity and favorable bioactivity

    Article • Intermetallics, March 2017, Elsevier

    Dr Prashanth Konda Gokuldoss

  12. Compression behavior of inter-particle regions in high-strength Al84Ni7Gd6Co3 alloy

    Article • Materials Letters, December 2016, Elsevier

    Dr Prashanth Konda Gokuldoss

  13. Effect of high pressure solidification on tensile properties and strengthening mechanisms of Al-20Si

    Article • Journal of Alloys and Compounds, December 2016, Elsevier

    Dr Prashanth Konda Gokuldoss

  14. Evaluation of mechanical and wear properties of Ti xNb 7Fe alloys designed for biomedical applications

    Article • Materials & Design, December 2016, Elsevier

    Dr Prashanth Konda Gokuldoss

  15. Simultaneous enhancements of strength and toughness in an Al-12Si alloy synthesized using selective laser melting

    Article • Acta Materialia, August 2016, Elsevier

    Dr Prashanth Konda Gokuldoss

  16. Kinetic analysis of the non-isothermal crystallization process, magnetic and mechanical properties of FeCoBSiNb and FeCoBSiNbCu bulk metallic glasses

    Article • Journal of Applied Physics, February 2016, American Institute of Physics

    Dr Prashanth Konda Gokuldoss

  17. Microstructure and phase formation in Al–20Si–5Fe–3Cu–1Mg synthesized by selective laser melting

    Article • Journal of Alloys and Compounds, February 2016, Elsevier

    Dr Prashanth Konda Gokuldoss

  18. Fabrication of Fe-based bulk metallic glass by selective laser melting: A parameter study

    Article • Materials & Design, December 2015, Elsevier

    Dr Prashanth Konda Gokuldoss

  19. Hybrid nanostructured aluminum alloy with super-high strength

    Article • NPG Asia Materials, December 2015, Springer Science + Business Media

    Dr Prashanth Konda Gokuldoss

  20. Influence of milling time on microstructure and magnetic properties of Fe80P11C9 alloy produced by mechanical alloying

    Article • Journal of Magnetism and Magnetic Materials, December 2015, Elsevier

    Dr Prashanth Konda Gokuldoss

  21. Processing of Al–12Si–TNM composites by selective laser melting and evaluation of compressive and wear properties

    Article • Journal of Materials Research, November 2015, Cambridge University Press

    Dr Prashanth Konda Gokuldoss

  22. Additive manufacturing of Cu–10Sn bronze

    Article • Materials Letters, October 2015, Elsevier

    Dr Prashanth Konda Gokuldoss

  23. Effect of Powder Particle Shape on the Properties of In Situ Ti–TiB Composite Materials Produced by Selective Laser Melting

    Article • Journal of Material Science and Technology, October 2015, Elsevier

    Dr Prashanth Konda Gokuldoss

  24. Length scale-dependent structural relaxation in Zr 57.5 Ti 7.5 Nb 5 Cu 12.5 Ni 10 Al 7.5 metallic glass

    Article • Journal of Alloys and Compounds, August 2015, Elsevier

    Dr Prashanth Konda Gokuldoss

  25. Evolution of microstructure and mechanical properties of as-cast Al-50Si alloy due to heat treatment and P modifier content

    Article • Materials & Design (1980-2015), June 2015, Elsevier

    Dr Prashanth Konda Gokuldoss

  26. Tensile properties of Al–12Si matrix composites reinforced with Ti–Al-based particles

    Article • Journal of Alloys and Compounds, May 2015, Elsevier

    Dr Prashanth Konda Gokuldoss

  27. Effect of Milling Time and the Consolidation Process on the Properties of Al Matrix Composites Reinforced with Fe-Based Glassy Particles

    Article • Metals, April 2015, MDPI AG

    Dr Prashanth Konda Gokuldoss

  28. Selective Laser Melting of Ti-45Nb Alloy

    Article • Metals, April 2015, MDPI AG

    Dr Prashanth Konda Gokuldoss

  29. Production of high strength Al85Nd8Ni5Co2 alloy by selective laser melting

    Article • Additive Manufacturing, April 2015, Elsevier

    Dr Prashanth Konda Gokuldoss

  30. Comparison of wear properties of commercially pure titanium prepared by selective laser melting and casting processes

    Article • Materials Letters, March 2015, Elsevier

    Dr Prashanth Konda Gokuldoss

  31. Mechanical behavior of porous commercially pure Ti and Ti–TiB composite materials manufactured by selective laser melting

    Article • Materials Science and Engineering A, February 2015, Elsevier

    Dr Prashanth Konda Gokuldoss

  32. Microstructure and mechanical properties of Mg–Al-based alloy modified with cerium

    Article • Materials Science and Engineering A, February 2015, Elsevier

    Dr Prashanth Konda Gokuldoss

  33. The thermal expansion behaviour of SiCp/Al–20Si composites solidified under high pressures

    Article • Materials & Design (1980-2015), January 2015, Elsevier

    Dr Prashanth Konda Gokuldoss

  34. Al-based metal matrix composites reinforced with Fe49.9Co35.1Nb7.7B4.5Si2.8 glassy powder: Mechanical behavior under tensile loading

    Article • Journal of Alloys and Compounds, December 2014, Elsevier

    Dr Prashanth Konda Gokuldoss

  35. High-strength ultrafine grain Mg–7.4%Al alloy synthesized by consolidation of mechanically alloyed powders

    Article • Journal of Alloys and Compounds, October 2014, Elsevier

    Dr Prashanth Konda Gokuldoss

  36. Tribological and corrosion properties of Al–12Si produced by selective laser melting

    Article • Journal of Materials Research, July 2014, Springer Science + Business Media

    Dr Prashanth Konda Gokuldoss

  37. Friction welding of Al–12Si parts produced by selective laser melting

    Article • Materials & Design (1980-2015), May 2014, Elsevier

    Dr Prashanth Konda Gokuldoss

  38. Fabrication and mechanical properties of Al-based metal matrix composites reinforced with Mg65Cu20Zn5Y10 metallic glass particles

    Article • Materials Science and Engineering A, April 2014, Elsevier

    Dr Prashanth Konda Gokuldoss

  39. Effect of ball milling on structure and thermal stability of Al84Gd6Ni7Co3 glassy powders

    Article • Intermetallics, March 2014, Elsevier

    Dr Prashanth Konda Gokuldoss

  40. Mechanical behavior of Al-based matrix composites reinforced with Mg58Cu28.5Gd11Ag2.5 metallic glasses

    Article • Advanced Powder Technology, March 2014, Elsevier

    Dr Prashanth Konda Gokuldoss

  41. Tensile properties of Al matrix composites reinforced with in situ devitrified Al84Gd6Ni7Co3 glassy particles

    Article • Journal of Alloys and Compounds, February 2014, Elsevier

    Dr Prashanth Konda Gokuldoss

  42. Influence of Annealing on Mechanical Properties of Al-20Si Processed by Selective Laser Melting

    Article • Metals, January 2014, MDPI AG

    Dr Prashanth Konda Gokuldoss

  43. Microstructure and mechanical properties of Al–12Si produced by selective laser melting: Effect of heat treatment

    Article • Materials Science and Engineering A, January 2014, Elsevier

    Dr Prashanth Konda Gokuldoss

  44. Production of Porous β-Type Ti–40Nb Alloy for Biomedical Applications: Comparison of Selective Laser Melting and Hot Pressing

    Article • Materials, December 2013, MDPI AG

    Mr Matthias Bönisch, Dr Prashanth Konda Gokuldoss

  45. Microstructure and magnetic properties of soft magnetic composites based on silicon resin coated Co40Fe22Ta8B30 glassy powders

    Article • Intermetallics, December 2013, Elsevier

    Dr Prashanth Konda Gokuldoss

  46. Fabrication and characterization of bulk glassy Co40Fe22Ta8B30 alloy with high thermal stability and excellent soft magnetic properties

    Article • Acta Materialia, October 2013, Elsevier

    Dr Prashanth Konda Gokuldoss

  47. Production of customized hybrid porous structures by powder metallurgy of Ni59Zr20Ti16Si2Sn3 glassy powders

    Article • Journal of Materials Research, August 2013, Springer Science + Business Media

    Dr Sergio Scudino, Dr Prashanth Konda Gokuldoss

  48. Synthesis and Characterization of NanocrystallineMg-7.4%Al Powders Produced by Mechanical Alloying

    Article • Metals, January 2013, MDPI AG

    Dr Prashanth Konda Gokuldoss

  49. Mechanical behavior of the cold-rolled Zr57Ti8Nb2.5Cu13.9Ni11.1Al7.5metallic glass–quasicrystalline composite

    Article • International Journal of Materials Research (formerly Zeitschrift fuer Metallkunde), September 2012, Carl Hanser Verlag

    Dr Prashanth Konda Gokuldoss

  50. Modeling the strengthening effect of Al–Cu–Fe quasicrystalline particles in Al-based metal matrix composites

    Article • Journal of Alloys and Compounds, September 2012, Elsevier

    Dr Prashanth Konda Gokuldoss

  51. Phase transitions in Al3Ca8 and Al14Ca13 intermetallic compounds induced by milling and annealing

    Article • Materials Letters, July 2012, Elsevier

    Dr Prashanth Konda Gokuldoss

  52. Structural and Mechanical Characterization of Zr58.5Ti8.2Cu14.2Ni11.4Al7.7 Bulk Metallic Glass

    Article • Materials, December 2011, MDPI AG

    Dr Prashanth Konda Gokuldoss

  53. Fabrication and Response of Al70Y16Ni10Co4Glass Reinforced Metal Matrix Composites

    Article • Materials and Manufacturing Processes, October 2011, Taylor & Francis

    Dr Prashanth Konda Gokuldoss

  54. Comment on the paper ‘Thermal stability of the Al70Ni10Ti10Zr5Ta5 amorphous alloy powder fabricated by mechanical alloying’ by Xiu Wei, Xinfu Wang, Fusheng Han, Haowen Xie, Cui’e Wen, J. Alloys Compd. 496 (2010) 313–316

    Article • Journal of Alloys and Compounds, October 2010, Elsevier

    Dr Prashanth Konda Gokuldoss

  55. Influence of Mechanical Activation on Decomposition of Titanium Hydride

    Article • Materials and Manufacturing Processes, August 2010, Taylor & Francis

    Dr Prashanth Konda Gokuldoss

  56. Production, Kinetic Study and Properties of Fe-Based Glass and Its Composites

    Article • Materials and Manufacturing Processes, July 2010, Taylor & Francis

    Dr Prashanth Konda Gokuldoss

  57. Al-based metal matrix composites reinforced with nanocrystalline Al-Ti-Ni particles

    Article • Journal of Physics Conference Series, July 2010, Institute of Physics Publishing

    Dr Prashanth Konda Gokuldoss

  58. Crystallization behavior and consolidation of gas-atomized Al84Gd6Ni7Co3 glassy powder

    Article • Journal of Alloys and Compounds, February 2010, Elsevier

    Dr Prashanth Konda Gokuldoss

  59. Crystallization kinetics of Zr65Ag5Cu12.5Ni10Al7.5 glassy powders produced by ball milling of pre-alloyed ingots

    Article • Materials Science and Engineering A, July 2009, Elsevier

    Dr Prashanth Konda Gokuldoss

  60. Crystallization kinetics and consolidation of mechanically alloyed Al70Y16Ni10Co4 glassy powders

    Article • Journal of Alloys and Compounds, May 2009, Elsevier

    Dr Prashanth Konda Gokuldoss

  61. Mechanical properties of Al-based metal matrix composites reinforced with Zr-based glassy particles produced by powder metallurgy

    Article • Acta Materialia, April 2009, Elsevier

    Dr Prashanth Konda Gokuldoss