All Stories

  1. Weld zone and residual stress development in AA7050 stationary shoulder friction stir T-joint weld
  2. Linking microstructure and processing defects to mechanical properties of selectively laser melted AlSi10Mg alloy
  3. Synchrotron X-ray diffraction based method for stress intensity factor evaluation in the bulk of materials
  4. Quantifying fibre reorientation during axial compression of a composite through time-lapse X-ray imaging and individual fibre tracking
  5. Thermo – mechanical properties of SPS produced self-healing thermal barrier coatings containing pure and alloyed MoSi 2 particles
  6. New software protocols for enabling laboratory based temporal CT
  7. The effect of shoulder coupling on the residual stress and hardness distribution in AA7050 friction stir butt welds
  8. Laser-matter interactions in additive manufacturing of stainless steel SS316L and 13-93 bioactive glass revealed by in situ X-ray imaging
  9. High resolution low kV EBSD of heavily deformed and nanocrystalline Aluminium by dictionary-based indexing
  10. Effect of hydration and crack orientation on crack-tip strain, crack opening displacement and crack-tip shielding in elephant dentin
  11. Microstructural degradation of Electron Beam-Physical Vapour Deposition Thermal Barrier Coating during thermal cycling tracked by X-ray micro-computed tomography
  12. Improved Low Cycle Fatigue Analysis for Ni-Based Turbine Nozzles
  13. Evaporation Dynamics and NaCl Precipitation on Capillarity-Coupled Heterogeneous Porous Surfaces
  14. Joint image reconstruction method with correlative multi-channel prior for x-ray spectral computed tomography
  15. In situ X-ray imaging of defect and molten pool dynamics in laser additive manufacturing
  16. Industrial Gear Oils: Tribological Performance and Subsurface Changes
  17. X-ray computed tomography of polymer composites
  18. Time-lapse 3D imaging of calcite precipitation in a microporous column
  19. 3D characterization of porosity in an air plasma-sprayed thermal barrier coating and its effect on thermal conductivity
  20. 7.6 Computed Tomography of Composites
  21. TomoPhantom, a software package to generate 2D–4D analytical phantoms for CT image reconstruction algorithm benchmarks
  22. 4.10 Residual Stresses in Metal Matrix Composites
  23. Investigation of residual stress distribution and texture evolution in AA7050 stationary shoulder friction stir welded joints
  24. Residual stress control of multipass welds using low transformation temperature fillers
  25. A Novel Tomographic Reconstruction Method Based on the Robust Student's t Function For Suppressing Data Outliers
  26. X-ray micro-computed tomography (μCT): an emerging opportunity in parasite imaging
  27. SparseBeads data: benchmarking sparsity-regularized computed tomography
  28. The quantification of impact damage distribution in composite laminates by analysis of X-ray computed tomograms
  29. Three dimensional imaging of electrical trees in multiple stages
  30. Special Issue on ‘Modern Imaging Techniques in Fracture and Damage Analyses’: Selected papers from the 21st European Conference of Fracture (ECF 21), held in Catania, Sicily, Italy, on 20–24 June 2016
  31. Mapping fibre failure in situ in carbon fibre reinforced polymers by fast synchrotron X-ray computed tomography
  32. The imaging of failure in structural materials by synchrotron radiation X-ray microtomography
  33. Model-based iterative reconstruction using higher-order regularization of dynamic synchrotron data
  34. X-ray Tomography Characterisation of Lattice Structures Processed by Selective Electron Beam Melting
  35. Multiscale correlative tomography: an investigation of creep cavitation in 316 stainless steel
  36. The Influence of Porosity on Fatigue Crack Initiation in Additively Manufactured Titanium Components
  37. Strain-induced reactivation of corrosion pits in austenitic stainless steel
  38. Microstructural evolution during sintering of copper particles studied by laboratory diffraction contrast tomography (LabDCT)
  39. Correlative 3D Imaging and Characterization of Human Dentine
  40. Degradation of metallic materials studied by correlative tomography
  41. Correlative Tomography for Additive Manufacturing of Biomedical Implants
  42. Crystallographic effects on the corrosion of twin roll cast AZ31 Mg alloy sheet
  43. Mid-thickness studies of the stress intensity factor in the bulk of bainitic steel
  44. Evolution of Residual Stress in Tensile Armour Wires of Flexible Pipes During Pipe Manufacture
  45. A study of the progression of damage in an axially loaded Branta leucopsis femur using X-ray computed tomography and digital image correlation
  46. Ablation-resistant carbide Zr0.8Ti0.2C0.74B0.26 for oxidizing environments up to 3,000 °C
  47. 3D elemental mapping of materials and structures by laboratory scale spectroscopic X-ray tomography
  48. Digital element simulation of aligned tows during compaction validated by computed tomography (CT)
  49. A multi-scale correlative investigation of ductile fracture
  50. Time-lapse lab-based x-ray nano-CT study of corrosion damage
  51. Comparison of residual stress distributions in conventional and stationary shoulder high-strength aluminum alloy friction stir welds
  52. How to fragment peralkaline rhyolites: Observations on pumice using combined multi-scale 2D and 3D imaging
  53. Comparison of grain to grain orientation and stiffness mapping by spatially resolved acoustic spectroscopy and EBSD
  54. The influence of NaCl concentration on salt precipitation in heterogeneous porous media
  55. Crack healing behaviour of Cr 2 AlC MAX phase studied by X-ray tomography
  56. On compression and damage evolution in two thermoplastics
  57. On the high-rate failure of carbon fibre composites
  58. X-ray micro computed tomography characterization of cellular SiC foams for their applications in chemical engineering
  59. On compression and damage evolution in PTFE and PEEK
  60. On the compression of aluminium foam structures under shock
  61. X-ray computed tomography study of kink bands in unidirectional composites
  62. Broad ion beam serial section tomography
  63. Laboratory diffraction contrast tomography - applications and future directions
  64. Utilising correlative 3D imaging to understand creep cavitation in stainless steel
  65. An evaluation of diffraction peak profile analysis (DPPA) methods to study plastically deformed metals
  66. Generation of micro-scale finite element models from synchrotron X-ray CT images for multidirectional carbon fibre reinforced composites
  67. Influence of embedded MoSi 2 particles on the high temperature thermal conductivity of SPS produced yttria-stabilised zirconia model thermal barrier coatings
  68. Influence of Tow Architecture on Compaction and Nesting in Textile Preforms
  69. The effect of the weld fusion zone shape on residual stress in submerged arc welding
  70. X-ray microtomography as a tool for investigating the petrological context of Precambrian cellular remains
  71. Fatigue damage assessment of uni-directional non-crimp fabric reinforced polyester composite using X-ray computed tomography
  72. Micro-mechanics based damage mechanics for 3D orthogonal woven composites: Experiment and numerical modelling
  73. Porosity regrowth during heat treatment of hot isostatically pressed additively manufactured titanium components
  74. In Situ Laboratory-Based Transmission X-Ray Microscopy and Tomography of Material Deformation at the Nanoscale
  75. Determination of the constitutive relation and critical condition for the shock compression of cellular solids
  76. 4-D imaging of sub-second dynamics in pore-scale processes using real-time synchrotron X-ray tomography
  77. Correlative multiscale tomography of biological materials
  78. High Spatial Resolution Evaluation of Residual Stresses in Shot Peened Specimens Containing Sharp and Blunt Notches by Micro-hole Drilling, Micro-slot Cutting and Micro-X-ray Diffraction Methods
  79. Dynamic damage in carbon-fibre composites
  80. A comparison of different approaches for imaging cracks in composites by X-ray microtomography
  81. Characterisation of overloads in fatigue by 2D strain mapping at the surface and in the bulk
  82. Post-processing techniques for making reliable measurements from curve-skeletons
  83. The application of 3D imaging techniques, simulation and diffusion experiments to explore transport properties in porous oxygen transport membrane support materials
  84. The variation in elastic modulus throughout the compression of foam materials
  85. 3D imaging by serial block face scanning electron microscopy for materials science using ultramicrotomy
  86. Sparsity seeking total generalized variation for undersampled tomographic reconstruction
  87. The effect of defects on the mechanical response of Ti-6Al-4V cubic lattice structures fabricated by electron beam melting
  88. Temporal sparsity exploiting nonlocal regularization for 4D computed tomography reconstruction
  89. X-ray Computed Tomographic Investigation of the Porosity and Morphology of Plasma Electrolytic Oxidation Coatings
  90. The Effectiveness of Hot Isostatic Pressing for Closing Porosity in Titanium Parts Manufactured by Selective Electron Beam Melting
  91. Publisher's Note: “Response and representation of ductile damage under varying shock loading conditions in tantalum” [J. Appl. Phys. 119, 085103 (2016)]
  92. Repeated crack healing in MAX-phase ceramics revealed by 4D in situ synchrotron X-ray tomographic microscopy
  93. Characterisation of an Advanced Nickel Based Superalloy Post Cold Work by Swaging
  94. Evolution of damage during the fatigue of 3D woven glass-fibre reinforced composites subjected to tension–tension loading observed by time-lapse X-ray tomography
  95. Response and representation of ductile damage under varying shock loading conditions in tantalum
  96. Residual stress of as-deposited and rolled wire+arc additive manufacturing Ti–6Al–4V components
  97. Quantifying the metallurgical response of a nuclear steel to welding thermal cycles
  98. Large volume serial section tomography by Xe Plasma FIB dual beam microscopy
  99. Synchrotron analysis of toughness anomalies in nanostructured bainite
  100. Towards in-process x-ray CT for dimensional metrology
  101. Application of a Quasi In Situ Experimental Approach to Estimate 3-D Pitting Corrosion Kinetics in Stainless Steel
  102. Comparative Analysis of Shot-Peened Residual Stresses Using Micro-Hole Drilling, Micro-Slot Cutting, X-ray Diffraction Methods and Finite-Element Modelling
  103. Determination of the high temperature elastic properties and diffraction elastic constants of Ni-base superalloys
  104. Investigation of strain-rate effect on the compressive behaviour of closed-cell aluminium foam by 3D image-based modelling
  105. Modelling the Residual Stress Field Ahead of the Notch Root in Shot Peened V-Notched Samples
  106. Late-stage fatigue damage in a 3D orthogonal non-crimp woven composite: An experimental and numerical study
  107. Evaluation of the interfacial shear strength and residual stress of TiAlN coating on ZIRLO™ fuel cladding using a modified shear-lag model approach
  108. 3D chemical imaging in the laboratory by hyperspectral X-ray computed tomography
  109. Congestive Heart Failure Leads to Prolongation of the PR Interval and Atrioventricular Junction Enlargement and Ion Channel Remodelling in the Rabbit
  110. Non-destructive mapping of grain orientations in 3D by laboratory X-ray microscopy
  111. 2D and 3D imaging of fatigue failure mechanisms of 3D woven composites
  112. X-ray microscopy for in situ characterization of 3D nanostructural evolution in the laboratory
  113. Geochemical Evidence of the Seasonality, Affinity and Pigmenation of Solenopora jurassica
  114. Nonintrusive estimation of anisotropic stiffness maps of heterogeneous steel welds for the improvement of ultrasonic array inspection
  115. Interpreting pathologies in extant and extinct archosaurs using micro-CT
  116. Novel implementations of relaxation methods for measuring residual stresses at the micron scale
  117. On the deformation twinning of Mg AZ31B: A three-dimensional synchrotron X-ray diffraction experiment and crystal plasticity finite element model
  118. 2D mapping of plane stress crack-tip fields following an overload
  119. Damage evolution in freeze cast metal/ceramic composites exhibiting lamellar microstructures
  120. Characterisation and modelling of defect formation in direct-chill cast AZ80 alloy
  121. Corrigendum to ‘‘Influence of processing conditions on strut structure and compressive properties of cellular lattice structures fabricated by selective laser melting’’ [Mater. Sci. Eng. A 628(2015)188–197]
  122. Microstructural analysis of TRISO particles using multi-scale X-ray computed tomography
  123. Measurement of Residual Stress Shakedown in Pressure/Tensile Armour Wires of Flexible Pipes by Neutron Diffraction
  124. Effects of Grain and Pore Size on Salt Precipitation During Evaporation from Porous Media
  125. Laser Shock Peening on Zr-based Bulk Metallic Glass and Its Effect on Plasticity: Experiment and Modeling
  126. Morphological Characterisation of Unstained and Intact Tissue Micro-architecture by X-ray Computed Micro- and Nano-Tomography
  127. Revisiting the blocking force test on ferroelectric ceramics using high energy x-ray diffraction
  128. Employing temporal self-similarity across the entire time domain in computed tomography reconstruction
  129. Comparison and combination of imaging techniques for three dimensional analysis of electrical trees
  130. Effect of sugar on bread dough aeration during mixing
  131. Diffraction tomography of strain
  132. Assessment of surface integrity of Ni superalloy after electrical-discharge, laser and mechanical micro-drilling processes
  133. Residual stresses due to foreign object damage in laser-shock peened aerofoils: Simulation and measurement
  134. 4D-CT reconstruction with unified spatial-temporal patch-based regularization
  135. Influence of processing conditions on strut structure and compressive properties of cellular lattice structures fabricated by selective laser melting
  136. Measuring overload effects during fatigue crack growth in bainitic steel by synchrotron X-ray diffraction
  137. The effect of density and feature size on mechanical properties of isostructural metallic foams produced by additive manufacturing
  138. Full-field energy-dispersive powder diffraction imaging using laboratory X-rays
  139. Fracture mechanics by three-dimensional crack-tip synchrotron X-ray microscopy
  140. Three-dimensional characterization of electrodeposited lithium microstructures using synchrotron X-ray phase contrast imaging
  141. Strain-rate sensitivity of foam materials: A numerical study using 3D image-based finite element model
  142. Evolution of a laser shock peened residual stress field locally with foreign object damage and subsequent fatigue crack growth
  143. The role of crack branching in stress corrosion cracking of aluminium alloys
  144. Fatigue Behavior of Shot Peened Notched Specimens: Effect of the Residual Stress Field Ahead of the Notch Root
  145. Two-dimensional X-ray CT image based meso-scale fracture modelling of concrete
  146. Phase transition modeling of polytetrafluoroethylene during Taylor impact
  147. Investigation of the elastic/crystallographic anisotropy of welds for improved ultrasonic inspections
  148. The influence of the laser scan strategy on grain structure and cracking behaviour in SLM powder-bed fabricated nickel superalloy
  149. Three dimensional imaging of electrical trees in micro and nano-filled epoxy resin
  150. Modelling the effect of elastic and plastic anisotropies on stresses at grain boundaries
  151. Optimal Iodine Staining of Cardiac Tissue for X-Ray Computed Tomography
  152. Multimodal Image Reconstruction Using Supplementary Structural Information in Total Variation Regularization
  153. Or how diffraction peaks can broaden based on dislocation types as much as dislocation density
  154. Multiscale 3D analysis of creep cavities in AISI type 316 stainless steel
  155. Influence of Surface Anomalies Following Hole Making Operations on the Fatigue Performance for a Nickel-Based Superalloy
  156. High Pressure Interpass Rolling of Wire + Arc Additively Manufactured Titanium Components
  157. A new method for quantifying anisotropic martensitic transformation strains accumulated during constrained cooling
  158. Development of Simplified Empirical Phase Transformation Model for Use in Welding Residual Stress Simulations
  159. On the Thermo-Mechanical Behaviour of SA508 Grade 4 Ferritic Steel
  160. A multiscale modelling analysis of the contribution of crystalline elastic anisotropy to intergranular stresses in ferroelectric materials
  161. A novel technique to incorporate structural prior information into multi-modal tomographic reconstruction
  162. Identification of crystalline elastic anisotropy in PZT ceramics from in-situ blocking stress measurements
  163. The influence of shock-loading path on the spallation response of Ta
  164. Three-dimensional characterisation and simulation of deformation and damage during Taylor impact in PTFE
  165. X-ray microtomography study of the spallation response in Ta-W
  166. A new method of performance verification for x-ray computed tomography measurements
  167. Correlative Tomography
  168. A multiscale model for reversible ferroelectric behaviour of polycrystalline ceramics
  169. The application of phase contrast X-ray techniques for imaging Li-ion battery electrodes
  170. The production and characterization of topologically and mechanically gradient open-cell thermoplastic foams
  171. Micro-CT Evaluation of Voids in the Filling Material of Single-Rooted Teeth Obturated with Different Techniques
  172. Combining X-ray microtomography and three-dimensional digital volume correlation to track microstructure evolution during sintering of copper powder
  173. Imaging and analysis techniques for electrical trees using X-ray computed tomography
  174. Imaging and analysis techniques for electrical trees using X-ray computed tomography
  175. Image based modelling of microstructural heterogeneity in LiFePO 4 electrodes for Li-ion batteries
  176. Back Stress Work Hardening Confirmed by Bauschinger Effect in a TRIP Steel Using Bending Tests
  177. Characterising the Integrity of Machined Surfaces in a Powder Nickel Alloy used in Aircraft Engines
  178. Comparison of tool wear mechanisms and surface integrity for dry and wet micro-drilling of nickel-base superalloys
  179. Micro-CT evaluation of the effectiveness of the combined use of rotary and hand instrumentation in removal of Resilon
  180. Oxygen transport through supported Ba0.5Sr0.5Co0.8Fe0.2O3−δ membranes
  181. The effect of minimum dwell cycles on the environmental and fatigue response of RR1000
  182. Quantitative X-ray tomography
  183. Three-dimensional observation and image-based modelling of thermal strains in polycrystalline alumina
  184. Elastic and plastic strain effects on eddy current response of aluminium alloys
  185. Damage development in open-hole composite specimens in fatigue. Part 1: Experimental investigation
  186. Lithiation-Induced Dilation Mapping in a Lithium-Ion Battery Electrode by 3D X-Ray Microscopy and Digital Volume Correlation
  187. Effect of overload on crack closure in thick and thin specimens via digital image correlation
  188. In Situ Synchrotron Studies of Reversible and Irreversible Non-elastic Strain in a Two-Phase TiAl Alloy
  189. Three dimensional characterisation of electrical trees
  190. A Graphical Processing Unit–Based Parallel Implementation of Multiplicative Algebraic Reconstruction Technique Algorithm for Limited View Tomography
  191. Comparison of the Mechanical Behaviour of Standard and Auxetic Foams by X-ray Computed Tomography and Digital Volume Correlation
  192. Bread dough aeration dynamics during pressure step-change mixing: Studies by X-ray tomography, dough density and population balance modelling
  193. Synchrotron X-ray Diffraction
  194. On the three-dimensional structure of WC grains in cemented carbides
  195. The Influence of Geometry on Residual Stress Around Repair Welds
  196. Influence of wall roughness and packing density on stagnant zone formation during funnel flow discharge from a silo: An X-ray imaging study
  197. Analysis of a prehistoric Egyptian iron bead with implications for the use and perception of meteorite iron in ancient Egypt
  198. Metamorphosis revealed: time-lapse three-dimensional imaging inside a living chrysalis
  199. The effect of β phase on microstructure and texture evolution during thermomechanical processing of α+β Ti alloy
  200. Study of overload effects in bainitic steel by synchrotron X-ray diffraction
  201. A novel architecture for pore network modelling with applications to permeability of porous media
  202. Saurichthys (Pisces, Actinopterygii) teeth from the Lower Triassic of Spitsbergen, with comments on their stable isotope composition (δ13C and δ18O) and X−ray microtomography
  203. The Role of Cross-Sectional Geometry, Curvature, and Limb Posture in Maintaining Equal Safety Factors: A Computed Tomography Study
  204. An anisotropic enhanced thermal conductivity approach for modelling laser melt pools for Ni-base super alloys
  205. Eigenstrain modelling of residual stress generated by arrays of laser shock peening shots and determination of the complete stress field using limited strain measurements
  206. Fault location and diagnosis in a medium voltage EPR power cable
  207. Revealing the three dimensional internal structure of aluminium alloys
  208. Application of Micro-Computed Tomography With Iodine Staining to Cardiac Imaging, Segmentation, and Computational Model Development
  209. Imaging cracks in hostile regimes
  210. Characterizing the effects of elevated temperature on the air void pore structure of advanced gas-cooled reactor pressure vessel concrete using x-ray computed tomography
  211. Residual stresses caused by head-on and 45° foreign object damage for a laser shock peened Ti–6Al–4V alloy aerofoil
  212. Residual stress fields after FOD impact on flat and aerofoil-shaped leading edges
  213. Three-dimensional imaging of inhomogeneous lithologies using X-ray computed tomography: characterization of drill core from the Borrowdale Volcanic Group
  214. Work hardening induced by martensite during transformation-induced plasticity in plain carbon steel
  215. Finite element modelling versus classic beam theory: comparing methods for stress estimation in a morphologically diverse sample of vertebrate long bones
  216. A new species of Craspedisia (Araneae: Theridiidae) in Miocene Dominican amber, imaged using X-ray computed tomography
  217. Dependence of dielectric behavior in BiFeO3 ceramics on intrinsic defects
  218. MRI measurements of vessel calibre in tumour xenografts: Comparison with vascular corrosion casting
  219. Effects of Cooling Rates on Glass Formation and Magnetic Behavior for the Fe73.0C7.0Si3.3B5.0P8.7Mo3.0 Bulk Metallic Glass
  220. Ancient Ephemeroptera–Collembola Symbiosis Fossilized in Amber Predicts Contemporary Phoretic Associations
  221. A novel approach for imaging of electrical trees
  222. Tomographic Reconstruction of Neopterous Carboniferous Insect Nymphs
  223. Hole-Drilling Residual Stress Measurement with Artifact Correction Using Full-Field DIC
  224. Fourier basis for the engineering assessment of cracks in residual stress fields
  225. Fatigue and Damage in Structural Materials Studied by X-Ray Tomography
  226. Microstructure of In Situ Mg Metal Matrix Composites Based on Silica Nanoparticles
  227. An evaluation of the evolution of workpiece surface integrity in hole making operations for a nickel-based superalloy
  228. Stress Residual
  229. Techniques for electrical tree imaging
  230. Investigation of interfacial properties of atmospheric plasma sprayed thermal barrier coatings with four-point bending and computed tomography technique
  231. Piezomorphic Materials
  232. Hole-Drilling Residual Stress Measurement with Artifact Correction Using Full-Field DIC
  233. Macro and intergranular stress responses of austenitic stainless steel to 90° strain path changes
  234. Exploring microstructural changes associated with oxidation in Ni–YSZ SOFC electrodes using high resolution X-ray computed tomography
  235. On the evolution of local material properties and residual stress in a three-pass SA508 steel weld
  236. Evolution of crack-bridging and crack-tip driving force during the growth of a fatigue crack in a Ti/SiC composite
  237. Friction Stir Welding in HSLA-65 Steel: Part I. Influence of Weld Speed and Tool Material on Microstructural Development
  238. X-ray damage characterisation in self-healing fibre reinforced polymers
  239. Overload effects on fatigue crack-tip fields under plane stress conditions: surface and bulk analysis
  240. Submicron-scale depth profiling of residual stress in amorphous materials by incremental focused ion beam slotting
  241. Fibre bridging during high temperature fatigue crack growth in Ti/SiC composites
  242. In-situ X-ray microtomography study of the movement of a granular material within a die
  243. Spallation response of Ti-6Al-4V: Rear surface velocimetry and X-ray tomography
  244. Un supplément à la liste des syrphes (Diptera, Syrphidae) de l'Ain et du Rhône, et liste préliminaire de ceux de la Loire
  245. Characterization of Cement Microstructure for the Immobilization of Nuclear Waste Using Advanced Imaging Methods
  246. Effects of stop–start features on residual stresses in a multipass austenitic stainless steel weld
  247. Multi Length Scale Microstructural Investigations of a Commercially Available Li-Ion Battery Electrode
  248. Fibre bundles in the human extensor carpi ulnaris tendon are arranged in a spiral
  249. Surface Decoration for Improving the Accuracy of Displacement Measurements by Digital Image Correlation in SEM
  250. A minute fossil phoretic mite recovered by phase-contrast X-ray computed tomography
  251. 3D Crack-tip Microscopy: Illuminating Micro-Scale Effects on Crack-Tip Behavior
  252. Guest Editorial
  253. A Comparison of Residual Stress Development in Inertia Friction Welded Fine Grain and Coarse Grain Nickel-Base Superalloy
  254. Assessment of machining performance using the wear map approach in micro-drilling
  255. Assessment of the Deformation of Low Density Polymeric Auxetic Foams by X-Ray Tomography and Digital Volume Correlation
  256. Comparison of methods to determine variations in unstrained unit cell parameter across welds
  257. Microstructure and properties of hot isostatically pressed powder and extruded Ti25V15Cr2Al0·2C
  258. Porting the AVS/Express scientific visualization software to Cray XT4
  259. A method for the 3-D quantification of bridging ligaments during crack propagation
  260. X-Ray Microtomography for 3D Microstructure Characterization of Magnesium Matrix Composite Reinforced with Glassy Carbon Particles
  261. Micron-Scale Residual Stress Measurement by Micro-Hole Drilling and Digital Image Correlation
  262. A combined approach to microstructure mapping of an Al–Li AA2199 friction stir weld
  263. Cranial anatomy ofThalassiodracon hawkinsii(Reptilia, Plesiosauria) from the Early Jurassic of Somerset, United Kingdom
  264. Computed tomography recovers data from historical amber: an example from huntsman spiders
  265. Suppression of ring artefacts when tomographing anisotropically attenuating samples
  266. Design of weld fillers for mitigation of residual stresses in ferritic and austenitic steel welds
  267. Friction Stir Welding of HSLA-65 Steel: Part II. The Influence of Weld Speed and Tool Material on the Residual Stress Distribution and Tool Wear
  268. Depth and Lateral Variation of Machining-Induced Residual Stress for a Nickel Base Superalloy
  269. Measurement of Residual Stresses in Surface Treated Stainless Steel Groove Welds
  270. Residual stresses in laser direct metal deposited Waspaloy
  271. Thermal Relaxation of Residual Stresses in Nickel-Based Superalloy Inertia Friction Welds
  272. In-Situ Observation and Modelling of Intergranular Cracking in Polycrystalline Alumina
  273. Microstructural Characterization of SOFC Electrodes: Observations and Simulations
  274. A REGION OF INTEREST COMPUTED TOMOGRAPHY TECHNIQUE FOR INSPECTION OF CFRP LAMINATES
  275. Crack Tip Behaviour in Residual Stress Field: Finite Element Modelling and Neutron Diffraction Measurements
  276. Mapping Residual-Stress Distributions in a Laser-Peened Vit-105 Bulk-Metallic Glass Using the Focused-Ion-Beam Micro-Slitting Method
  277. Modelling the Interpass Temperature Effect on Residual Stress in Low Transformation Temperature Stainless Steel Welds
  278. Using Synchrotron X-Ray Nano-CT to Characterize SOFC Electrode Microstructures in Three-Dimensions at Operating Temperature
  279. Evaluation of surface integrity in micro drilling process for nickel-based superalloy
  280. Metal-Based Composite Materials for High-Temperature Application
  281. Region-of-interest tomography using filtered backprojection: assessing the practical limits
  282. An analytical formula for ring artefact suppression in X-ray tomography
  283. Effects of superimposed electric field and porosity on the hydrostatic pressure-induced rhombohedral to orthorhombic martensitic phase transformation in PZT 95/5 ceramics
  284. Corrigendum to “Shear cracking in an Al powder compact studied by X-ray microtomography” [Mater. Sci. Eng. A 508 (2009) 64–70]
  285. Nanotomography for understanding materials degradation
  286. Comparison of the X-ray performance of small pixel CdTe and CZT detectors
  287. Interfacial shear strength behaviour of Ti/SiC metal matrix composites at room and elevated temperature
  288. Non-contact characterization of hybrid aluminium/carbon-fibre-reinforced plastic sheets using multi-frequency eddy-current sensors
  289. Assessment of Thread-Cutting Strategies to Enable Damage-Tolerant Surfaces on an Advanced Ni-Based Aerospace Superalloy
  290. The pulsed eddy current response to applied loading of various aluminium alloys
  291. Imaging fossilised spiders in amber using lab-based phase contrast x-ray tomography
  292. Regularization methods for inverse problems in x-ray tomography
  293. An examination of phase retrieval algorithms as applied to phase contrast tomography using laboratory sources
  294. In situ 3D X-ray microtomography study comparing auxetic and non-auxetic polymeric foams under tension
  295. Prediction of residual stress distributions for single weld beads deposited on to SA508 steel including phase transformation effects
  296. Process–microstructure–property correlations in Al–Li AA2199 friction stir welds
  297. Deformation twinning in Ti-6Al-4V during low strain rate deformation to moderate strains at room temperature
  298. Improved tomographic reconstructions using adaptive time-dependent intensity normalization
  299. Noncontact evaluation of the dependency of electrical conductivity on stress for various Al alloys as a function of plastic deformation and annealing
  300. 3D inspection of fabrication and degradation processes from X-ray (micro) tomography images using a hole closing algorithm
  301. The evolution of crack-tip stresses during a fatigue overload event
  302. Mapping Residual Stress Profiles at the Micron Scale Using FIB Micro-Hole Drilling
  303. A prioriinformation in a regularized sinogram-based method for removing ring artefacts in tomography
  304. Engineering the residual stress state and microstructure of stainless steel with mechanical surface treatments
  305. The Deformation of Face-Centred-Cubic Metals Measured by Diffraction Peak Profile Analysis
  306. The Use of Diffraction to Study Fatigue Crack Tip Mechanics
  307. Synchrotron Strain Mapping of the Residual Strain Distribution around Foreign Object Damage in Laser Shock Peened Ti-6AL-4V Alloy
  308. Application of anisotropic inclusion theory to the deformation of Ni based single crystal superalloys: Stress–strain curves determination
  309. Predicting the onset of rafting of γ′ precipitates by channel deformation in a Ni superalloy
  310. Efficacy of active cooling for controlling residual stresses in friction stir welds
  311. Annealing Models in Welding Simulation: Conservative and Non-Conservative Residual Stress Distributions
  312. Un cas de myiase humaine en France due à Sarcophaga (Liopygia) argyrostoma (Diptera, Sarcophagidae)
  313. A Comparison of Residual Stresses in Single-Pass and Multipass SA508 Steel Welds
  314. Investigation of Transformation Induced Plasticity and Residual Stress Analysis in Stainless Steel Welds
  315. EDITORIAL
  316. Mapping Residual Stress Distributions at the Micron Scale in Amorphous Materials
  317. Prediction of hardness minimum locations during natural aging in an aluminum alloy 6061-T6 friction stir weld
  318. Biomechanics of Dromaeosaurid Dinosaur Claws: Application of X‐Ray Microtomography, Nanoindentation, and Finite Element Analysis
  319. A ring artifact suppression algorithm based on a priori information
  320. Stainless steel weld metal designed to mitigate residual stresses
  321. Image stitching strategies for tomographic imaging of large objects at high resolution at synchrotron sources
  322. Finite element process modelling of inertia friction welding advanced nickel-based superalloy
  323. Residual stresses in face finish turning of high strength nickel-based superalloy
  324. Minor cutting edge–workpiece interactions in drilling of an advanced nickel-based superalloy
  325. The extent of relaxation of weld residual stresses on cutting out cross-weld test-pieces
  326. Comparison of residual stresses in Ti–6Al–4V and Ti–6Al–2Sn–4Zr–2Mo linear friction welds
  327. High-temperature strain field measurement using digital image correlation
  328. Non-contact characterisation of Carbon Fibre Reinforced Plastics in hybrid aluminium / CFRP sheets using multi-frequency eddy current sensors
  329. Shear cracking in an Al powder compact studied by X-ray microtomography
  330. Some experimental observations on crack closure and crack‐tip plasticity
  331. Application of anisotropic inclusion theory to the energy evaluation for the matrix channel deformation and rafting geometry of γ−γ′ Ni superalloys
  332. The sensitivity of Ni-based superalloy to hole making operations: Influence of process parameters on subsurface damage and residual stress
  333. Friction stir welding of aluminium alloys
  334. Measured residual stress distributions for low and high heat input single weld beads deposited on to SA508 steel
  335. Characterization of microplasticity in TiAl-based alloys
  336. Noncontact Characterization of Carbon-Fiber-Reinforced Plastics Using Multifrequency Eddy Current Sensors
  337. Residual stress engineering in friction stir welds by roller tensioning
  338. Crystallographic texture and microstructure of pulsed diode laser-deposited Waspaloy
  339. In situ three-dimensional X-ray microtomography of an auxetic foam under tension
  340. Bainite orientation in plastically deformed austenite
  341. Fatigue crack growth and load redistribution in Ti/SiC composites observed in situ
  342. Spatially Resolved Materials Property Data From a Uniaxial Cross-Weld Tensile Test
  343. The Effects of Filler Metal Transformation Temperature on Residual Stresses in a High Strength Steel Weld
  344. Using augmented reality to promote an understanding of materials science to school children
  345. Inertia friction welds between nickel superalloy components: Analysis of residual stress by eigenstrain distributions
  346. Real-time acquisition of fatigue crack images for monitoring crack-tip stress intensity variations within fatigue cycles
  347. Strain Measurement by Digital Image Correlation
  348. Mechanical Tensioning of High-Strength Aluminum Alloy Friction Stir Welds
  349. Application of a micromechanics model to the overall properties of heterogeneous graphite
  350. Importance of crystal orientation in linear friction joining of single crystal to polycrystalline nickel-based superalloys
  351. Residual strains and microstructure development in single and sequential double sided friction stir welds in RQT-701 steel
  352. Shakedown of deep cold rolling residual stresses in titanium alloys
  353. The stress intensity of mixed mode cracks determined by digital image correlation
  354. Global mechanical tensioning for the management of residual stresses in welds
  355. Residual stress driven creep cracking in AISI Type 316 stainless steel
  356. The effect of tensioning and sectioning on residual stresses in aluminium AA7749 friction stir welds
  357. Focus on martensitic transformations
  358. Comparison using neutron diffraction of martensitic transformation in Fe–Mn–Si shape memory alloys with and without VN precipitates
  359. Domain switching in rhombohedral PZT ceramics under electrical and mechanical loading
  360. Characterizing Phase Transformations and Their Effects on Ferritic Weld Residual Stresses with X-Rays and Neutrons
  361. Study of a Crack at a Fastener Hole by Digital Image Correlation
  362. Micromechanics of domain switching in rhombohedral PZT ceramics
  363. Synchrotron X-ray studies of austenite and bainitic ferrite
  364. A plasticity model for powder compaction processes incorporating particle deformation and rearrangement
  365. Recent advances in residual stress measurement
  366. Determination of residual stress at weld interruptions by neutron diffraction
  367. Residual Stress Measurements in Autogenous SA508 Steel Welds
  368. Robotic sample manipulation for stress and texture determination on neutron and synchrotron X-ray diffractometers
  369. X-ray nanotomography
  370. Residual stress and its role in failure
  371. Methods for obtaining the strain-free lattice parameter when using diffraction to determine residual stress
  372. Welding residual stresses in ferritic power plant steels
  373. Mapping residual and internal stress in materials by neutron diffraction
  374. The shock response, simulation and microstructural determination of a model composite material
  375. The variation of the unstrained lattice parameter in an AA7010 friction stir weld
  376. Texture development in Ti–6Al–4V linear friction welds
  377. Characterization of laser peening residual stresses in Al 7075 by synchrotron diffraction and the contour method
  378. Neutron diffraction characterisation of thermomechanical behaviour of Fe-Mn-Si shape memory alloy
  379. Process inspections and the OECD GLP Principles
  380. Residual stresses in and around electromagnetically installed rivets measured using synchrotron and neutron diffraction
  381. Editorial
  382. FE Modelling of Mechanical Tensioning for Controlling Residual Stresses in Friction Stir Welds
  383. FE Modelling of Mechanical Tensioning for Controlling Residual Stresses in Friction Stir Welds
  384. A verified model of laser direct metal deposition using an analytical enthalpy balance method
  385. An anisotropic enhanced thermal conductivity approach for modelling laser melt pools
  386. A Comparison of Measurement and Modelling of Plastically Induced Residual Stresses in a 316H and a Weld 347 Stainless Steel
  387. Spatially Resolved Materials Property Data From a Cross-Weld Tensile Test
  388. Transformation Temperatures and Welding Residual Stresses in Ferritic Steels
  389. Coplanar waveguide scanning microwave profiler
  390. In-situneutron diffraction study of the rhombohedral to orthorhombic phase transformation in lead zirconate titanate ceramics produced by uniaxial compression
  391. Dissimilar friction stir welds in AA5083–AA6082: The effect of process parameters on residual stress
  392. Synchrotron X-ray measurement and finite element analysis of residual strain in tungsten inert gas welded aluminum alloy 2024
  393. A comparison of inertia friction welds in three nickel base superalloys
  394. SALSA—A new instrument for strain imaging in engineering materials and components
  395. Effects of fatigue and fretting on residual stresses introduced by laser shock peening
  396. Evolution of intergranular stresses during in situ straining of IF steel with different grain sizes
  397. Microstructure mapping in friction stir welds of 7449 aluminium alloy using SAXS
  398. Dynamic Analysis of Residual Stress Introduced by Laser Peening
  399. SALSA: Advances in Residual Stress Measurement at ILL
  400. X-ray microtomographic observation of intergranular stress corrosion cracking in sensitised austenitic stainless steel
  401. Dynamic Analysis of Residual Stress Introduced by Laser Peening
  402. SALSA: Advances in Residual Stress Measurement at ILL
  403. Geometry Effects when Controlling Residual Stresses in Friction Stir Welds by Mechanical Tensioning
  404. Scanning Microwave Profiler
  405. Crack opening displacements during fatigue crack growth in Ti–SiC fibre metal matrix composites by X-ray tomography
  406. Three-dimensional imaging of materials by microtomography
  407. Characterization of the three-dimensional structure of a metallic foam during compressive deformation
  408. Dissimilar friction stir welds in AA5083-AA6082. Part I: Process parameter effects on thermal history and weld properties
  409. Dissimilar friction stir welds in AA5083-AA6082. Part II: Process parameter effects on microstructure
  410. Three dimensional observations and modelling of intergranular stress corrosion cracking in austenitic stainless steel
  411. Analysis of elastic strain and crystallographic texture in poled rhombohedral PZT ceramics
  412. A deconvolution method for the reconstruction of underlying profiles measured using large sampling volumes
  413. In situ analysis of cracks in structural materials using synchrotron X-ray tomography and diffraction
  414. Mapping the evolution of density in 3D of thermally oxidised graphite for nuclear applications
  415. Diode laser metal deposition: The effect of pulsed beam parameters on superalloy microstructure and deposit morphology
  416. Residual Stress Measurement Within a Single Pass Groove Weld Specimen Utilising Neutron Diffraction and the Contour Method
  417. Shakedown During Fatigue of Residual Stresses Introduced by Different Mechanical Surface Treatments
  418. High-Rate Compaction of Aluminium Alloy Foams
  419. Measurement and Prediction of the Residual Stress Field Generated by Side-Punching
  420. Particle movement during the deep penetration of a granular material studied by X-ray microtomography
  421. The Shock Response, Simulation and Microstructural Determination of an Inert Simulant
  422. Turning of advanced Ni based alloys obtained via powder metallurgy route
  423. An evaluation of recurrent neural network modelling for the prediction of damage evolution during forming
  424. Stress relaxation of shot-peened UDIMET 720Li under solely elevated-temperature exposure and under isothermal fatigue
  425. Texture of poled tetragonal PZT detected by synchrotron X-ray diffraction and micromechanics analysis
  426. Relaxation of residual stress in shot peened Udimet 720Li under high temperature isothermal fatigue
  427. Effects of Texture and Anisotropy on Intergranular Stress Development in Zirconium
  428. Orientation dependence of martensite variants during loading of Fe–Pd shape memory alloy
  429. Energy-input-based finite-element process modeling of inertia welding
  430. High-resolution strain mapping in bulk samples using full-profile analysis of energy dispersive synchrotron X-ray diffraction data
  431. Neutron Diffraction Study of Extruded Magnesium during Cyclic and Elevated Temperature Loading
  432. Full-field strain mapping by optical correlation of micrographs acquired during deformation
  433. Using pulsed neutron transmission for crystalline phase imaging and analysis
  434. Introduction to the Characterization of Residual Stress by Neutron Diffraction
  435. Micromechanics of residual stress and texture development due to poling in polycrystalline ferroelectric ceramics
  436. The effect of thermal oxidation on polycrystalline graphite studied by X-ray tomography
  437. Residual Stress Measurements Revealing Weld Bead Start and Stop Effects in Single and Multi-Pass Weld-Runs
  438. Imaging and strain mapping fibre by fibre in the vicinity of a fatigue crack in a Ti/SiC fibre composite
  439. High-resolution strain mapping in bulk samples using full-profile analysis of energy-dispersive synchrotron X-ray diffraction data
  440. A high energy synchrotron x-ray study of crystallographic texture and lattice strain in soft lead zirconate titanate ceramics
  441. Physically-based constitutive modelling of residual stress development in welding of aluminium alloy 2024
  442. Depth capabilities of neutron and synchrotron diffraction strain measurement instruments. I. The maximum feasible path length
  443. Depth capabilities of neutron and synchrotron diffraction strain measurement instruments. II. Practical implications
  444. High resolution X-ray tomography of short fatigue crack nucleation in austempered ductile cast iron
  445. Elastic strains around cracked cold-expanded fastener holes measured using the synchrotron X-ray diffraction technique
  446. Micromechanics of stress-induced martensitic transformation
  447. Neutron diffraction study of stress-induced martensitic transformation and variant change in Fe–Pd shape memory alloy
  448. Pattern decomposition and quantitative-phase analysis in pulsed neutron transmission
  449. Interphase and intergranular stress generation in carbon steels
  450. The effect of fibre fractures in the bridging zone of fatigue cracked Ti–6Al–4V/SiC fibre composites
  451. The role of surface condition, residual stress and microstructure on pre-yield cracking in Ti44Al8Nb1B
  452. Synchrotron Micro-tomography and Strain Mapping on a Fatigue Cracked Ti/SiC Fibre Composite
  453. Residual Stresses in Linear Friction Welded IMI550
  454. Residual Stress Prediction for the Inertia Welding Process
  455. An Analysis of Lattice Strain due to Disclination Dipole Walls in Fe-Pd Martensite
  456. Intergranular Stress Evolution in Titanium Studied by Neutron Diffraction and Self-consistent Modelling
  457. Quantification of creep cavitation damage around a crack in a stainless steel pressure vessel
  458. Residual Stress Driven Creep Cracking in Type 316 Stainless Steel
  459. Study of Residual Stresses Introduced by Laser Shock Peening in Wide Chord Fan Blades by Neutron and Synchrotron Diffraction
  460. The Appropriateness of Residual Stress Length Scales in Structural Integrity
  461. Measurement and Prediction of Residual Stresses in Aluminium Friction Stir Welds
  462. Near Surface Residual Stress Determination of Laser Shock Peening by Neutron Diffraction
  463. Neural Network Modeling for the Prediction of Texture Evolution of Hot Deformed Aluminum Alloys
  464. Neutron diffraction study of stress-induced martensitic transformation and variant change in Fe–Pd
  465. SALSA: Strain Analyser for Large and Small Scale Engineering Applications
  466. The Engineering Body Scanner Concept
  467. The Measurement of Residual Stress in Railway Rails by Diffraction and other Methods *
  468. Special Issue
  469. Mechanical energy criterion for stress-induced martensitic transformation
  470. Residual stress relief in MAG welded joints of dissimilar steels
  471. In situdetermination of stresses from time-of-flight neutron transmission spectra
  472. Microstructure, mechanical properties and residual stresses as a function of welding speed in aluminium AA5083 friction stir welds
  473. Effects of tooling on the residual stress distribution in an inertia weld
  474. Neutron diffraction study of the deformation behaviour of deformation processed copper–chromium composites
  475. Neutron and synchrotron measurements of residual strain in TIG welded aluminium alloy 2024
  476. X-ray tomographic imaging of Ti/SiC composites
  477. Measurements of fibre bridging during fatigue crack growth in Ti/SiC fibre metal matrix composites
  478. Observation and quantitative analysis of damage caused by creep in an A1 A359/SiC P composite
  479. Finite element modelling of tungsten inert gas welding of aluminium alloy 2024
  480. Computational assessment of the influence of load ratio on fatigue crack growth in fibre-reinforced metal matrix composites
  481. Engineering applications of Bragg-edge neutron transmission
  482. Measurement and modelling of residual stresses in a TIG weld
  483. Neutron-diffraction study of stress-induced martensitic transformation in TRIP steel
  484. The expected uncertainty of diffraction-peak location
  485. Synchrotron X-ray study of micromechanics of Ti/SiCfcomposites with fibres containing defects introduced by laser drilling
  486. A look ahead in residual stress analysis: the strain imager at the ILL
  487. Image Processing Issues in Digital Strain Mapping
  488. NEUTRON SCATTERING: Enhanced: The Case for Neutron Sources
  489. Inertia welding nickel-based superalloy: Part II. Residual stress characterization
  490. Inertia welding nickel-based superalloy: Part I. Metallurgical characterization
  491. Interfacial shear strength of Ti/SiC fibre composites measured by synchrotron strain measurement
  492. Creep of a composite with a diffusional creeping matrix
  493. Finite element modelling of frictional bridging during fatigue crack growth in fibre-reinforced metal matrix composites
  494. A neutron diffraction study of creep and damage occurrence in an A359/SiC composite
  495. Mapping of unstressed lattice parameters using pulsed neutron transmission diffraction
  496. Fatigue crack nuclei in austempered ductile cast iron
  497. Micromechanical analysis of internal stress development during single-fibre fragmentation testing of Ti/SiCf
  498. Multi-scale finite-element modelling of fatigue-crack growth in TiAl intermetallic matrix TiNb and Nb platelet composites
  499. Strain imaging by Bragg edge neutron transmission
  500. Changes in the misfit stresses in an Al/SiCp metal matrix composite under plastic strain
  501. Measurement and prediction of residual stresses in a titanium metal matrix composite ring
  502. Synchrotron strain scanning on BM16 at the ESRF
  503. The sin2 ψ-method in pulsed neutron transmission
  504. The d0-distribution in Al-2024 friction stir welds
  505. The precision of diffraction peak location
  506. Steady-state creep of a composite
  507. Monitoring Elastic Strain and Damage by Neutron and Synchrotron Beams
  508. Monitoring elastic strain and damage by neutron and synchrotron X-ray beams
  509. Bragg Edge Determination for Accurate Lattice Parameter and Elastic Strain Measurement
  510. Time-of-flight neutron transmission diffraction
  511. Residual stress. Part 1 – Measurement techniques
  512. Residual stress. Part 2 – Nature and origins
  513. Neutron and Synchrotron X-ray Strain Scanning
  514. Synchrotron X-ray residual strain scanning of a friction stir weld
  515. A synchrotron X-ray study of a Ti/SiCf composite during in situ straining
  516. Neutron strain scanning using a radially collimated diffracted beam
  517. Accelerated learning using Gaussian process models to predict static recrystallization in an Al-Mg alloy
  518. Model-neutron diffraction strain measurement comparisons for steady state creep of metal matrix composites
  519. An investigation of the isothermal creep response of Al-based composites by neutron diffraction
  520. The determination of the residual strains and stresses in a tungsten inert gas welded sheet of IN718 superalloy using neutron diffraction
  521. Damage mechanisms of coated systems under thermomechanical fatigue
  522. Comparison of three different techniques for measuring the residual stresses in an electron beam-welded plate of WASPALOY
  523. Ultrafine grain structures formed by thermomechanical processing of spray cast Al–Li alloys
  524. Separation of measured fatigue crack stress fields in a metal matrix composite material
  525. Mapping two-dimensional state of strain using synchroton X-ray diffraction
  526. A neutron diffraction study of load partitioning in continuous Ti/SiC composites
  527. Microstructural development in Pt-aluminide coating on CMSX-4 superalloy during TMF
  528. Prediction of damage evolution in forged aluminium metal matrix composites using a neural network approach
  529. A recurrent neural network for modelling dynamical systems
  530. Frictional behaviour of Al359/SiC/20p composite under isothermal and non-isothermal hot-working conditions as a function of surface roughness
  531. Separation of macroscopic, elastic mismatch and thermal expansion misfit stresses in metal matrix composite quenched plates from neutron diffraction measurements
  532. Micromechanics of failure of aluminide coated single crystal Ni superalloy under thermomechanical fatigue
  533. ENGIN — A new instrument for engineers
  534. In situ phase strain monitoring during isothermal creep of metal matrix composites
  535. Measurement of cavitation damage in isothermally crept Al/SiCp composites using small-angle neutron scattering
  536. Plastic bending of a residually stressed beam
  537. The effect of particle distribution on damage formation in particulate reinforced metal matrix composites deformed in compression
  538. The Effect of Clustering on Damage Formation in Particulate Reinforced MMCs Deformed in Compression
  539. A synchrotron radiation study of transient internal strain changes during the early stages of thermal cycling in an Al / SiCw MMC
  540. A new stroboscopic neutron diffraction method for monitoring materials subjected to cyclic loads: Thermal cycling of metal matrix composites
  541. Numerical prediction of the development of particle stress in the forging of aluminium metal matrix composites
  542. Effect of thermal residual stresses on fatigue crack opening and propagation behavior in an Al/SiC p metal matrix composite
  543. Weibull modelling of particle cracking in metal matrix composites
  544. The determination of the profile of macrostress and thermal mismatch stress through an Al/SiCp composite plate from the average residual strains measured in each phase
  545. Neutron Strain Measurement of Internal Strain in Metal and Ceramic Matrix Composites
  546. An examination of the mean stress contribution to the Bauschinger effect by neutron diffraction
  547. The influence of temperature on microstructural damage during uniaxial compression of aluminium matrix composites
  548. Examination of tensile/compressive loading asymmetries in aluminium based metal matrix composites using finite element method
  549. The deformation of discontinuously reinforced MMCs—I. The initial yielding behaviour
  550. The deformation of discontinuously reinforced MMCs—II. The elastic response
  551. Forging of ‘H’ sections from aluminium metal matrix composite bars, modelled using the finite element method
  552. Internal stress induced debonding in a zirconia-reinforced 6061 aluminium alloy composite
  553. Reinforcement phase stability during ageing of an aluminium alloy/yttria-stabilised zirconia composite
  554. Considerations in the use of yield asymmetries for the analysis of internal stresses in metal matrix composites
  555. The analysis of internal strains measured by neutron diffraction in Al/SiC metal matrix composites
  556. Iterative estimates of internal stresses in short-fibre metal matrix composites
  557. Use of the frozen-stress photoelastic method to explore load partitioning in short-fibre composites
  558. The application of the eshelby method of internal stress determination to short fibre metal matrix composites
  559. The determination of the elastic field of an ellipsoidal inclusion in a transversely isotropic medium, and its relevance to composite materials
  560. Comments on “The strength differential and bauschinger effects in SiC-Al composites”
  561. Various TEM methods for the study of metal matrix composites