All Stories

  1. Biomechanical comparison of a novel monocortical and two common bicortical external fixation systems regarding rigidity and dynamic stability
  2. Corrigendum to “Imaging techniques for the assessment of fracture repair”[Injury 45 (Supplement (2)) (2014) S16–S22]
  3. Traumatic brain injury: Comparison between autopsy and ante-mortem CT
  4. The pivotal role of the coronal fracture line for a new three-dimensional CT-based fracture classification of bicondylar proximal tibial fractures
  5. Implant Material, Type of Fixation at the Shaft, and Position of Plate Modify Biomechanics of Distal Femur Plate Osteosynthesis
  6. Novel bone surrogates for cranial surgery training
  7. A hybrid, low-cost tissue-like epidural needle insertion simulator
  8. Characterization of synthetic foam structures used to manufacture artificial vertebral trabecular bone
  9. Novel synthetic vertebrae provide realistic haptics for pedicle screw placement
  10. A high-glucose diet affects Achilles tendon healing in rats
  11. Inter-rater and intra-rater reliability of an adapted Wolf motor function test for older patients with shoulder injuries
  12. Biomechanical comparison of anatomical plating systems for comminuted distal humeral fractures
  13. Dynamic Stabilization of Simple Fractures With Active Plates Delivers Stronger Healing Than Conventional Compression Plating
  14. Biomechanical effects of angular stable locking in intramedullary nails for the fixation of distal tibia fractures
  15. Comparative study suggests that human bone morphogenetic proteins have no influence on the outcome of operative treatment of aseptic clavicle non-unions
  16. An expedited approach for sustained delivery of bone morphogenetic protein-7 to bone defects using gene activated fragments of subcutaneous fat
  17. Failure of fracture fixation in osteoporotic bone
  18. Osteoporotic fracture fixation – a biomechanical perspective
  19. When is the stability of a fracture fixation limited by osteoporotic bone?
  20. Bone mechanical properties and changes with osteoporosis
  21. Managing Vancouver B1 fractures by cerclage system compared to locking plate fixation – a biomechanical study
  22. Effect of Coracoid Drilling for Acromioclavicular Joint Reconstruction Techniques on Coracoid Fracture Risk: A Biomechanical Study
  23. Orthesen in der Unfallchirurgie
  24. Indikationsprüfung neuer Prothesenpassteile bei Oberschenkelamputierten
  25. Indikationsprüfung neuer Prothesenpassteile bei Oberschenkelamputierten
  26. Load distribution between cephalic screws in a dual lag screw trochanteric nail
  27. Dynamic Stabilization with Active Locking Plates Delivers Faster, Stronger, and More Symmetric Fracture-Healing
  28. Development of parietal bone surrogates for parietal graft lift training
  29. Biomechanical Comparison of Sacral Fixation Characteristics of Standard S1-Pedicle Screw Fixation versus a Novel Constrained S1-Dual-Screw Anchorage in the S1-Pedicle and S1-Alar Bone
  30. The effect of BMP-7 gene activated muscle tissue implants on the repair of large segmental bone defects
  31. Comparing the osteogenic potential of bone marrow and tendon-derived stromal cells to repair a critical-sized defect in the rat femur
  32. Biomechanical Assessment of Locked Plating for the Fixation of Patella Fractures
  33. Loads in the hip joint during physically demanding occupational tasks: A motion analysis study
  34. Checklist and Scoring System for the Assessment of Soft Tissue Preservation in CT Examinations of Human Mummies
  35. Marknagelosteosynthese an der distalen Tibia
  36. Fixation performance of an ultrasonically fused, bioresorbable osteosynthesis implant: A biomechanical and biocompatibility study
  37. Experimental Research Methods in Orthopedics and Trauma
  38. Effect of angular stability and other locking parameters on the mechanical performance of intramedullary nails
  39. 11 Biomechanical Assessment of Fracture Repair
  40. 10 Biomechanics of Fracture Fixation
  41. Breakage of cephalomedullary nailing in operative treatment of trochanteric and subtrochanteric femoral fractures
  42. Bone healing of critical size defects of the rat femur after the application of bone marrow aspirate and two different rh-BMP7 concentrations
  43. Intraosseous Fixation Compared to Plantar Plate Fixation for First Metatarsocuneiform Arthrodesis: A Cadaveric Biomechanical Analysis
  44. The bottleneck of evidence-based fracture care
  45. Biomechanical methods for the assessment of fracture repair
  46. Imaging techniques for the assessment of fracture repair
  47. The Influence of Distraction Force on the Intradiscal Pressure Gradient in the Bridged Lumbar Spine
  48. Complex Distal Humerus Fractures—Comparison of Polyaxial Locking and Nonlocking Screw Configurations—A Preliminary Biomechanical Study
  49. Impact of Constrained Dual-Screw Anchorage on Holding Strength and the Resistance to Cyclic Loading in Anterior Spinal Deformity Surgery
  50. Proximale Tibiafrakturen im Skisport – Inzidenz und Risikofaktoren
  51. Biomechanische Forschung
  52. Biomechanik der Frakturbehandlung
  53. Biomechanical Evaluation of Interlocking Lag Screw Design in Intramedullary Nailing of Unstable Pertrochanteric Fractures
  54. Individual density–elasticity relationships improve accuracy of subject-specific finite element models of human femurs
  55. An investigation to determine if a single validated density–elasticity relationship can be used for subject specific finite element analyses of human long bones
  56. Poloxamer-based hydrogels hardening at body core temperature as carriers for cell based therapies: in vitro and in vivo analysis
  57. Bupivacaine Induces Short-Term Alterations and Impairment in Rat Tendons
  58. The impact of a distal expansion mechanism added to a standard pedicle screw on pullout resistance. A biomechanical study
  59. Reply to Letter to the Editor: “Auxiliary locking plate improves fracture stability and healing in intertrochanteric fractures fixated by intramedullary nail (IMN)”
  60. Biomechanical Evaluation of Subtalar Fusion: The Influence of Screw Configuration and Placement
  61. Implant Material and Design Alter Construct Stiffness in Distal Femur Locking Plate Fixation: A Pilot Study
  62. Analysis of the intra-individual differences of the joint surfaces of the calcaneus
  63. Biomechanik der Wirbelsäule
  64. Repair of large segmental bone defects: BMP-2 gene activated muscle grafts vs. autologous bone grafting
  65. The influence of patellar resurfacing on patellar kinetics and retropatellar contact characteristics
  66. Auxiliary locking plate improves fracture stability and healing in intertrochanteric fractures fixated by intramedullary nail
  67. Instrumentelle Ganganalyse
  68. Reamed intramedullary nailing of diaphyseal tibial fractures: comparison of compression and non-compression nailing
  69. Distal radius fracture fixation with volar locking plates and additional bone augmentation in osteoporotic bone: a biomechanical study in a cadaveric model
  70. Biomechanical comparison of intramedullar versus extramedullar stabilization of intra-articular tibial plateau fractures
  71. Biomechanical comparison of locked plate osteosynthesis, reamed and unreamed nailing in conventional interlocking technique, and unreamed angle stable nailing in distal tibia fractures
  72. Comparison of revision strategies for failed C2-posterior cervical pedicle screws: a biomechanical study
  73. Foam phantom development for artificial vertebrae used for surgical training
  74. OSTEOFORM – AN E-LEARNING PLATFORM FOR FRACTURE CARE
  75. 3-T MRI assessment of osteophyte formation in patients with unilateral anterior cruciate ligament injury and reconstruction
  76. Tendons from Non-diabetic Humans and Rats Harbor a Population of Insulin-producing, Pancreatic Beta Cell-like Cells
  77. Finite element analysis of the ovine hip: Development, results and comparison with the human hip
  78. Winkelstabile Plattenosteosynthese der Patella
  79. Corrigendum to “Patient-specific finite element analysis of the human femur—A double-blinded biomechanical validation” [J. Biomech. 44 (2011) 1666–1672]
  80. Evaluation of Risk for Secondary Fracture After Removal of a New Femoral Neck Plate for Intracapsular Hip Fractures
  81. Posttraumatic arthrodesis of the subtalar joint – outcome in workers compensation and rates of non-union
  82. Die Stabilität von distalen Radiusfrakturen mit volaren winkelstabilen Plattenosteosynthesen
  83. Biomechanik des Becken-Bein-Übergangs
  84. Biomechanical comparison of two locking plate systems for the distal tibia
  85. Influence of total knee arthroplasty on patellar kinematics and contact characteristics
  86. Patient-specific finite element analysis of the human femur—A double-blinded biomechanical validation
  87. Should extramedullary fixations for hip fractures be removed after bone union?
  88. Biomechanical comparison of the end plate design of three vertebral body replacement systems
  89. A numerical model of the fracture healing process that describes tissue development and revascularisation
  90. Improvement of the shear fixation stability of intramedullary nailing
  91. Perivaskuläre axilläre Plexusanästhesie
  92. Effects of Construct Stiffness on Healing of Fractures Stabilized with Locking Plates
  93. Anatomical plate configuration affects mechanical performance in distal humerus fractures
  94. Quantification of Reaming Debris at the Fracture Gap of Diaphyseal A3 Femur Fractures After Reamed Intramedullary Nailing and Using an Intramedullary Application System
  95. Perkutane Applikation von rekombinantem humanem Bone Morphogenetic Protein-7 (rhBMP-7) nach Kallusdistraktion
  96. Hip screw migration testing: First results for hip screws and helical blades utilizing a new oscillating test method
  97. Biomechanischer Vergleich von zwei winkelstabilen, anatomisch angepassten Plattensystemen am distalen Humerus
  98. Far Cortical Locking Can Improve Healing of Fractures Stabilized with Locking Plates
  99. Osteoporosis prevalence and fracture characteristics in elderly female patients with fractures
  100. Teilbelastung in der Rehabilitation
  101. A biomechanical evaluation of orthopaedic implants for hip fractures by finite element analysis and in-vitro tests
  102. Herniation Pits und ihre Renaissance im Zusammenhang mit femoroazetabulärem Impingement
  103. A biomechanical rationale for C1-ring osteosynthesis as treatment for displaced Jefferson burst fractures with incompetency of the transverse atlantal ligament
  104. Modernes Implantatdesign für Osteosynthesen bei vorbestehender Osteoporose
  105. Ibandronate prevents deterioration of bone quality parameters after adjuvant chemotherapy with a taxane
  106. The Repair of Critical-Sized Bone Defects Using Expedited, Autologous BMP-2 Gene-Activated Fat Implants
  107. Evidence for anti-osteoporosis therapy in acute fracture situations—Recommendations of a multidisciplinary workshop of the International Society for Fracture Repair
  108. Teilbelastung in der Rehabilitation
  109. Strontium Ranelate Enhances Callus Strength More Than PTH 1-34 in an Osteoporotic Rat Model of Fracture Healing
  110. Healing of Large Segmental Bone Defects Induced by Expedited Bone Morphogenetic Protein-2 Gene-Activated, Syngeneic Muscle Grafts
  111. The stability of a hip fracture determines the fatigue of an intramedullary nail
  112. Herniation pits and cystic-appearing lesions at the anterior femoral neck: an anatomical study by MSCT and µCT
  113. Characterisation of a new bioadhesive system based on polysaccharides with the potential to be used as bone glue
  114. Type of Hip Fracture Determines Load Share in Intramedullary Osteosynthesis
  115. Increased cortical remodeling after osteotomy causes posttraumatic osteopenia
  116. Clinical evaluation of medicinal products for acceleration of fracture healing in patients with osteoporosis
  117. Quantitative Imaging of Musculoskeletal Tissue
  118. Influence of intramedullary nail diameter and locking mode on the stability of tibial shaft fracture fixation
  119. Influence of thread design on pedicle screw fixation
  120. ANALYSIS OF THE MUSCLE AND JOINT FORCES IN THE SHOULDER JOINT USING THE ANYBODY SIMULATION MODEL
  121. FRACTURE CAUSES OSTEOPENIA AT THE IPSILATERAL LIMB AND THE EFFECT IS POTENTIATED BY OVX
  122. ULTRASONIC WELDING OF BIOABSORBABLE PINS IN CANCELLOUS BONE FOR FRACTURE FIXATION
  123. Temporary distraction and compression of a diaphyseal osteotomy accelerates bone healing
  124. Elektromagnetische Verfahren bei Knochenheilungsstörungen
  125. CT assessment of herniation pits: prevalence, characteristics, and potential association with morphological predictors of femoroacetabular impingement
  126. Quantification of Reaming Debris at the Fracture Gap of Diaphyseal A2 and A3 Fractures After Reamed Intramedullary Nailing of the Sheep Tibia
  127. Validation of a Femoral Critical Size Defect Model for Orthotopic Evaluation of Bone Healing: A Biomechanical, Veterinary and Trauma Surgical Perspective
  128. Ibandronate affects callus formation and mechanical properties during fracture repair in ovariectomized Sprague–Dawley rats after 4 weeks of treatment
  129. The effect of adjuvant chemotherapy with a taxane and a bisphosphonate on bone mass and bone strength in an animal model
  130. Critical Issues in Translational and Clinical Research for the Study of New Technologies to Enhance Bone Repair
  131. Cervical anterior transpedicular screw fixation (ATPS)—Part II. Accuracy of manual insertion and pull-out strength of ATPS
  132. Clinical Use of Quantitative Computed Tomography and Peripheral Quantitative Computed Tomography in the Management of Osteoporosis in Adults: The 2007 ISCD Official Positions
  133. Interfragmentary Movement in Diaphyseal Tibia Fractures Fixed With Locked Intramedullary Nails
  134. Revascularisation during fracture healing with soft tissue injury
  135. Biomechanical comparison of two side plate fixation techniques in an unstable intertrochanteric osteotomy model: Sliding Hip Screw and Percutaneous Compression Plate
  136. VEGF producing bone marrow stromal cells (BMSC) enhance vascularization and resorption of a natural coral bone substitute
  137. The non-steroidal anti-inflammatory drug diclofenac reduces appearance of osteoblasts in bone defect healing in rats
  138. The role of cortical bone and its microstructure in bone strength
  139. Effects of diclofenac on periosteal callus maturation in osteotomy healing in an animal model
  140. Bone formation in a long bone defect model using a platelet-rich plasma-loaded collagen scaffold
  141. Moderate soft tissue trauma delays new bone formation only in the early phase of fracture healing
  142. Trabecular bone fracture healing simulation with finite element analysis and fuzzy logic
  143. Inhibition of cortical and cancellous bone formation in glucocorticoid-treated OVX sheep
  144. Osseointegration of alumina with a bioactive coating under load-bearing and unloaded conditions
  145. Intact fibula improves fracture healing in a rat tibia osteotomy model
  146. Prediction of fracture callus mechanical properties using micro-CT images and voxel-based finite element analysis
  147. Biocompatibility and functionality of the degradable polymer alkylene bis(dilactoyl)-methacrylate for screw augmentationin vivo
  148. Mechanics and mechano-biology of fracture healing in normal and osteoporotic bone
  149. “Shear movement at the fracture site delays healing in a diaphyseal fracture model” by Peter Augat, Johannes Buger, Sandra Schorlemmer, Thomas Henke, Manfred Peraus, Lutz Claes [J Orthop Res 2003;21:1011–17]
  150. Reply to letter to the Editor: Shear movement at the fracture site delays healing in a diaphyseal fracture model
  151. Mechanical regulation of HB-GAM expression in bone cells
  152. Extension of a state-of-the-art optimization criterion to predict co-contraction
  153. Influence of preoperative mechanical bone quality and bone mineral density on aseptic loosening of total hip arthroplasty after seven years
  154. Glucocorticoid Treatment of Ovariectomized Sheep Affects Mineral Density, Structure, and Mechanical Properties of Cancellous Bone
  155. Shear movement at the fracture site delays healing in a diaphyseal fracture model
  156. Influence of haemorrhagic shock on fracture healing
  157. The fracture gap size influences the local vascularization and tissue differentiation in callus healing
  158. Influence of diclofenac (group of nonsteroidal anti-inflammatory drugs) on fracture healing
  159. Glucocorticoid-treated sheep as a model for osteopenic trabecular bone in biomaterials research
  160. Influence of the stiffness of bone defect implants on the mechanical conditions at the interface—a finite element analysis with contact
  161. Measuring power during the sit-to-stand transfer
  162. The effect of mechanical stability on local vascularization and tissue differentiation in callus healing
  163. Correlation of bone mineral density with strength and microstructural parameters of cortical bone in vitro
  164. Effects of one-plane and two-plane external fixation on sheep osteotomy healing and complications
  165. A Modified Hip Screw Incorporating Injected Cement for the Fixation of Osteoporotic Trochanteric Fractures
  166. The effect of micromovement on callus formation
  167. Prediction of strength of cortical bone in vitro by microcomputed tomography
  168. Predictive value of Singh index and bone mineral density measured by quantitative computed tomography in determining the local cancellous bone quality of the proximal femur
  169. A new bioresorbable polymer for screw augmentation in the osteosynthesis of osteoporotic cancellous bone: A biomechanical evaluation
  170. Composites made of rapidly resorbable ceramics and poly(lactide) show adequate mechanical properties for use as bone substitute materials
  171. Degradation behavior of composite pins made of tricalcium phosphate and poly(L,DL-lactide)
  172. In vivo investigations on composites made of resorbable ceramics and poly(lactide) used as bone graft substitutes
  173. Mechanical Stimulation by External Application of Cyclic Tensile Strains Does Not Effectively Enhance Bone Healing
  174. Prediction of cortical bone porosityIn Vitro by microcomputed tomography
  175. Predictive value of bone mineral density and morphology determined by peripheral quantitative computed tomography for cancellous bone strength of the proximal femur
  176. Mechanische Einflüsse auf die Callusheilung
  177. Models in Fracture Healing: Report from the Reisensburg Workshop September 1999
  178. Prediction of bone strength of distal forearm using radius bone mineral density and phalangeal speed of sound
  179. In vivo assessment of trabecular bone structure using fractal analysis of distal radius radiographs
  180. Trabecular Bone Architecture in the Distal Radius Using Magnetic Resonance Imaging in Subjects with Fractures of the Proximal Femur
  181. Predictive value of bone mineral density and Singh Index for the in vitro mechanical properties of cancellous bone in the femoral head
  182. Fractal analysis of radiographs: Assessment of trabecular bone structure and prediction of elastic modulus and strength
  183. Ultrasound Velocity of Trabecular Cubes Reflects Mainly Bone Density and Elasticity
  184. Power Spectral Analysis of Vertebral Trabecular Bone Structure from Radiographs: Orientation Dependence and Correlation with Bone Mineral Density and Mechanical Properties
  185. Trabecular Bone Mineral and Calculated Structure of Human Bone Specimens Scanned by Peripheral Quantitative Computed Tomography: Relation to Biomechanical Properties
  186. Accuracy of cortical and trabecular bone measurements with peripheral quantitative computed tomography (pQCT)
  187. Distal radius fractures: Mechanisms of injury and strength prediction by bone mineral assessment
  188. Image-Based Assessment of Spinal Trabecular Bone Structure from High-Resolution CT Images
  189. Quantitative Bone Mineral Assessment at the Forearm: A Review
  190. In Vivo High Resolution MRI of the Calcaneus: Differences in Trabecular Structure in Osteoporosis Patients
  191. Local tissue properties in bone healing: Influence of size and stability of the osteotomy gap
  192. Texture analysis of hand radiographs to assess bone structure
  193. High-Resolution Magnetic Resonance Imaging: Three-Dimensional Trabecular Bone Architecture and Biomechanical Properties
  194. Noninvasive Assessment of Bone Density and Structure Using Computed Tomography and Magnetic Resonance 11This manuscript was partially adapted from Genant, H., Engelke, K., Fuerst, T. Gluer, C. C., Grampp, S., Harris, S. T., Jergas, M., Lang, T., Lu, Y....
  195. Assessment of Bone Mineral at Appendicular Sites In Females With Fractures of the Proximal Femur
  196. Anisotropy of the elastic modulus of trabecular bone specimens from different anatomical locations
  197. A Comparative Study of Trabecular Bone Properties in the Spine and Femur Using High Resolution MRI and CT
  198. Assessment of Trabecular Structure Using High Resolution CT Images and Texture Analysis
  199. Morphometric texture analysis of spinal trabecular bone structure assessed using orthogonal radiographic projections
  200. Influence of size and stability of the osteotomy gap on the success of fracture healing
  201. Volumetric quantitative computed tomography of the proximal femur: Precision and relation to bone strength
  202. Patella position and biomechanical properties of the patellar tendon 1 year after removal of its central third
  203. Biomechanical strength versus spinal trabecular bone strucure assessed using contact radiography and texture analysis
  204. Quantitative Assessment of Experimental Fracture Repair by Peripheral Computed Tomography
  205. Calcaneal fractures cause a lateral load shift in Chopart joint contact stress and plantar pressure pattern in vitro
  206. Early, Full Weightbearing With Flexible Fixation Delays Fracture Healing
  207. In vivo effect of shock-waves on the healing of fractured bone
  208. Effect of dynamization on gap healing of diaphyseal fractures under external fixation
  209. Increase of stability in external fracture fixation by hydroxyapatite-coated bone screws
  210. Influence of water temperature on pressure pulses generated by an electromagnetic type lithotripter