Contact

All Stories

  1. Scanning and transmission electron microscopy examinations of composite hybrid chromate and chromate phosphate conversion coatings exposed in hot 100% relative humidity environments

    Article • Hybrid Advances, August 2023, Elsevier

    Dr. Peter IKUBANNI

  2. Electrochemical investigation of the corrosion susceptibility of hybrid reinforced Al6063 with SiC and PKSA in 1.0 M sulfuric acid environment

    Article • Engineering Reports, July 2023, Wiley

    Dr Adekunle A Adeleke, Dr. Peter IKUBANNI

  3. ASSESSMENT OF TRIBOLOGICAL PROPERTIES OF STIR CAST Al6063 ALLOY REINFORCED WITH OKABA COAL ASH

    Article • Acta Metallurgica Slovaca, March 2023, SciCell

    Dr Adekunle A Adeleke, Dr. Peter IKUBANNI , Dr. Temitayo Samson Ogedengbe

  4. Pathways for the Valorization of Animal and Human Waste to Biofuels, Sustainable Materials, and Value-Added Chemicals

    Article • Environments, March 2023, MDPI AG

    Dr. Peter IKUBANNI , Dr Adekunle A Adeleke

  5. Prediction of Biogas Yield from Codigestion of Lignocellulosic Biomass Using Adaptive Neuro-Fuzzy Inference System (ANFIS) Model

    Article • Journal of Engineering, February 2023, Hindawi Publishing Corporation

    Dr Adekunle A Adeleke, Dr. Peter IKUBANNI

  6. CORROSION BEHAVIOR OF Al/SiC/PKSA HYBRID COMPOSITES IN 1.0 M H2SO4 ENVIRONMENT USING POTENTIODYNAMIC POLARIZATION TECHNIQUE

    Article • Acta Metallurgica Slovaca, December 2022, SciCell

    Dr. Peter IKUBANNI

  7. Electrochemical Studies of the Corrosion Behavior of Al/SiC/PKSA Hybrid Composites in 3.5% NaCl Solution

    Article • Journal of Composites Science, September 2022, MDPI AG

    Dr Adekunle A Adeleke, Dr. Peter IKUBANNI

  8. Effect of biomass co-digestion and application of artificial intelligence in biogas production: A review

    Article • Energy Sources Part A Recovery Utilization and Environmental Effects, June 2022, Taylor & Francis

    Dr Adekunle A Adeleke, Dr. Peter IKUBANNI

  9. PHYSICO-MECHANICAL PROPERTIES ANND MICROSTRUCTURE RESPONSES OF HYBRID REINFORCED Al6063 COMPOSITES TO PKSA/SiC INCLUSION

    Article • Acta Metallurgica Slovaca, March 2022, SciCell

    Dr Adekunle A Adeleke, Dr. Peter IKUBANNI

  10. Investigation of physicochemical characteristics of selected lignocellulose biomass

    Article • Scientific Reports, February 2022, Springer Science + Business Media

    Dr Adekunle A Adeleke, Dr. Peter IKUBANNI

  11. Load and Temperature Significance on Tensile Strength and Flow Stress Distributions of Ecae Aluminum 6063

    Article • January 2022, Bentham Science Publishers

    Dr. Peter IKUBANNI , Dr Adekunle A Adeleke

  12. Study on Combustion Characteristics and Thermodynamic Parameters of Thermal Degradation of Guinea Grass (Megathyrsus maximus) in N2-Pyrolytic and Oxidative Atmospheres

    Article • Sustainability, December 2021, MDPI AG

    Dr Adekunle A Adeleke, Dr. Peter IKUBANNI

  13. PHYSICO-TRIBOLOGICAL ANND WEAR MECHANISM CHARACTERISTICS OF HYBRID REINFFORCED Al6063 MATRIX COMPOSITES

    Article • Acta Metallurgica Slovaca, December 2021, SciCell

    Dr. Peter IKUBANNI , Dr Adekunle A Adeleke

  14. Mechanical properties and stress distribution in aluminium 6063 extrudates processed by equal channel angular extrusion technique

    Article • Australian Journal of Mechanical Engineering, November 2021, Taylor & Francis

    Dr Adekunle A Adeleke, Dr. Peter IKUBANNI

  15. Tumbling strength and reactivity characteristics of hybrid fuel briquette of coal and biomass wastes blends

    Article • Alexandria Engineering Journal, October 2021, Elsevier

    Dr Adekunle A Adeleke, Dr. Peter IKUBANNI

  16. Sustainability of Multifaceted Usage of Biomass: A Review

    Article • Heliyon, September 2021, Elsevier

    Dr Adekunle A Adeleke, Dr. Peter IKUBANNI

  17. Physico-chemical characterization, thermal decomposition and kinetic modeling of Digitaria sanguinalis under nitrogen and air environments

    Article • Case Studies in Thermal Engineering, August 2021, Elsevier

    Dr Adekunle A Adeleke, Dr. Peter IKUBANNI

  18. Development of Methodology for Characterization of Surface Roughness of Solid Metallic Surfaces Using Oil Slippage Method

    Article • Latvian Journal of Physics and Technical Sciences, August 2021, De Gruyter

    Dr. Peter IKUBANNI , Dr Adekunle A Adeleke

  19. Synthesis, physico-mechanical and microstructural characterization of Al6063/SiC/PKSA hybrid reinforced composites

    Article • Scientific Reports, July 2021, Springer Science + Business Media

    Dr Adekunle A Adeleke, Dr. Peter IKUBANNI

  20. Kinetics modeling, thermodynamics and thermal performance assessments of pyrolytic decomposition of Moringa oleifera husk and Delonix regia pod

    Article • Scientific Reports, July 2021, Springer Science + Business Media

    Dr Adekunle A Adeleke, Dr. Peter IKUBANNI

  21. Optimization of the tribological properties of hybrid reinforced aluminium matrix composites using Taguchi and Grey's relational analysis

    Article • Scientific African, July 2021, Elsevier

    Dr Adekunle A Adeleke, Dr. Peter IKUBANNI

  22. Mechanical Properties of Al 6063 Processed with Equal Channel Angular Extrusion under Varying Process Parameters

    Article • International Journal of Engineering Research in Africa, June 2021, Trans Tech Publications

    Dr Adekunle A Adeleke, Dr. Peter IKUBANNI

  23. Physical and mechanical characteristics of composite briquette from coal and pretreated wood fines

    Article • International Journal of Coal Science & Technology, May 2021, Springer Science + Business Media

    Dr Adekunle A Adeleke, Dr. Peter IKUBANNI

  24. Tribological and physical properties of hybrid reinforced aluminium matrix composites

    Article • Materials Today Proceedings, April 2021, Elsevier

    Dr Adekunle A Adeleke, Dr. Peter IKUBANNI

  25. Magnesium inclusion effect on Al-Zn-Cu alloys: A study on microstructure and mechanical properties

    Article • Materials Today Proceedings, April 2021, Elsevier

    Dr Adekunle A Adeleke, Dr. Peter IKUBANNI

  26. Design and Fabrication of an Ablative Pyrolyzer for Production of Bio- lubricants and chemicals in Oil Well Drilling Application

    Article • IOP Conference Series Earth and Environmental Science, March 2021, Institute of Physics Publishing

    Dr Adekunle A Adeleke, Dr. Peter IKUBANNI

  27. Experimental Study on the Properties of Fired Sand–Clay Ceramic Products for Masonry Applications

    Article • Journal of Materials in Civil Engineering, February 2021, American Society of Civil Engineers (ASCE)

    Dr. Peter IKUBANNI

  28. Physicomechanical properties of composite tiles produced from granite dusts and municipal wastes

    Article • Innovative Infrastructure Solutions, January 2021, Springer Science + Business Media

    Dr Adekunle A Adeleke, Dr. Peter IKUBANNI

  29. Ash analyses of bio-coal briquettes produced using blended binder

    Article • Scientific Reports, January 2021, Springer Science + Business Media

    Dr Adekunle A Adeleke, Dr. Peter IKUBANNI

  30. Physico-mechanical properties of cement bonded ceiling board developed from teak and African locust bean tree wood residue

    Article • Materials Today Proceedings, January 2021, Elsevier

    Dr Adekunle A Adeleke, Dr. Peter IKUBANNI , OLUMOYEWA DOTUN ATOYEBI

  31. Characterization of some commercially available Nigerian coals as carbonaceous material for direct reduced iron production

    Article • Materials Today Proceedings, January 2021, Elsevier

    Dr Adekunle A Adeleke, Dr. Peter IKUBANNI

  32. Non-isothermal kinetic parametric evaluation of Tectona grandis using model-fitting methods

    Article • Materials Today Proceedings, January 2021, Elsevier

    Dr Adekunle A Adeleke, Dr. Peter IKUBANNI

  33. Energy from biomass and plastics recycling: a review

    Article • Cogent Engineering, January 2021, Taylor & Francis

    Dr Adekunle A Adeleke, Dr. Peter IKUBANNI

  34. Influence of temperature on the chemical compositions and microstructural changes of ash formed from palm kernel shell

    Article • Results in Engineering, December 2020, Elsevier

    Dr Adekunle A Adeleke, Dr. Peter IKUBANNI

  35. Development and characterization of wood-polypropylene plastic-cement composite board

    Article • Case Studies in Construction Materials, December 2020, Elsevier

    Dr Adekunle A Adeleke, Dr. Peter IKUBANNI

  36. The inhibitive action of Plukenetia conophora plant extract on the corrosion of Al–Zn–Cu alloy in different acidic media

    Article • International Review of Applied Sciences and Engineering, November 2020, Akademiai Kiado

    Dr Adekunle A Adeleke, Dr. Peter IKUBANNI

  37. Mechanical properties and microstructural evaluation of heat-treated aluminum alloy using formulated bio-quenchants

    Article • International Review of Applied Sciences and Engineering, November 2020, Akademiai Kiado

    Dr Adekunle A Adeleke, Dr. Peter IKUBANNI

  38. Effectiveness of biodegradable oils as quenching media for commercial aluminium

    Article • Materiali in tehnologije, October 2020, Institute of Metals and Technology

    Dr Adekunle A Adeleke, Dr. Peter IKUBANNI

  39. Essential basics on biomass torrefaction, densification and utilization

    Article • International Journal of Energy Research, September 2020, Wiley

    Dr Adekunle A Adeleke, Dr. Peter IKUBANNI

  40. Comparative Analyses of the Inhibitive Influence of Cascabela thevetia and Jatropha curcas Leaves Extracts on Mild Steel

    Article • Nature Environment and Pollution Technology, September 2020, Technoscience Publications

    Dr Adekunle A Adeleke, Dr. Peter IKUBANNI

  41. Corrosion rates of green novel hybrid conversion coating on aluminium 6061

    Article • Results in Engineering, September 2020, Elsevier

    Dr Adekunle A Adeleke, Dr. Peter IKUBANNI

  42. Optimization of heat treatment parameters of medium carbon steel quenched in different media using Taguchi method and grey relational analysis

    Article • Heliyon, July 2020, Elsevier

    Dr Adekunle A Adeleke, Dr. Peter IKUBANNI

  43. Performance of Methyl-5-Benzoyl-2-Benzimidazole Carbamate (Mebendazole) as Corrosion Inhibitor for Mild Steel in Dilute Sulphuric Acid

    Article • The Scientific World JOURNAL, June 2020, Hindawi Publishing Corporation

    Dr. Peter IKUBANNI

  44. Influence of phase composition and microstructure on corrosion behavior of laser based Ti–Co–Ni ternary coatings on Ti–6Al–4V alloy

    Article • Journal of Alloys and Compounds, June 2020, Elsevier

    Dr. Peter IKUBANNI

  45. The ignitability, fuel ratio and ash fusion temperatures of torrefied woody biomass

    Article • Heliyon, March 2020, Elsevier

    Dr Adekunle A Adeleke, Dr. Peter IKUBANNI

  46. Performance evaluation and optimization of a Moringa Oleifera depodding machine: A response surface approach

    Article • Heliyon, February 2020, Elsevier

    Dr. Peter IKUBANNI

  47. Development and performance assessment of piston-type briquetting machine

    Article • IOP Conference Series Earth and Environmental Science, February 2020, Institute of Physics Publishing

    Dr. Peter IKUBANNI

  48. Effect of curing methods on the strength of interlocking paving blocks

    Article • Cogent Engineering, January 2020, Taylor & Francis

    OLUMOYEWA DOTUN ATOYEBI, Dr. Peter IKUBANNI

  49. A review on primary synthesis and secondary treatment of aluminium matrix composites

    Article • Arab Journal of Basic and Applied Sciences, January 2020, Taylor & Francis

    Dr Adekunle A Adeleke, Dr. Peter IKUBANNI

  50. Recycling of plastics with compatibilizer as raw materials for the production of automobile bumper

    Article • Cogent Engineering, January 2020, Taylor & Francis

    Dr Adekunle A Adeleke, Dr. Peter IKUBANNI

  51. A review of ceramic/bio-based hybrid reinforced aluminium matrix composites

    Article • Cogent Engineering, January 2020, Taylor & Francis

    Dr Adekunle A Adeleke, Dr. Peter IKUBANNI

  52. Effects of the vibrations of powered hand tools on users: A case study

    Article • Istrazivanja i projektovanja za privredu, January 2020, Centre for Evaluation in Education and Science (CEON/CEES)

    Dr. Peter IKUBANNI

  53. Fabrication and Evaluation of Screw-like Fish Pelletizer

    Article • Journal of Physics Conference Series, December 2019, Institute of Physics Publishing

    Dr Adekunle A Adeleke, Dr. Peter IKUBANNI

  54. Comparative Analysis of Manual Strapping Method (MSM) and Electro-Optical Distance Ranging (EODR) Method of Tank Calibration

    Article • Journal of Physics Conference Series, December 2019, Institute of Physics Publishing

    Dr Adekunle A Adeleke, Dr. Peter IKUBANNI

  55. Microstructural assessment of AISI 1021 steel under rapid cyclic heat treatment process

    Article • Results in Engineering, December 2019, Elsevier

    Dr Adekunle A Adeleke, Dr. Peter IKUBANNI

  56. Valorized chicken feather as corrosion inhibitor for mild steel in drilling mud

    Article • Results in Engineering, December 2019, Elsevier

    Dr. Peter IKUBANNI

  57. Reinforcement bar Corrosion - Causes and Management

    Article • Journal of Physics Conference Series, December 2019, Institute of Physics Publishing

    Dr. Peter IKUBANNI

  58. Combustion characteristics of fuel briquettes made from charcoal particles and sawdust agglomerates

    Article • Scientific African, November 2019, Elsevier

    Dr Adekunle A Adeleke, Dr. Peter IKUBANNI

  59. Evaluation of thermal decomposition characteristics and kinetic parameters of melina wood

    Article • Biofuels, August 2019, Taylor & Francis

    Dr Adekunle A Adeleke, Dr. Peter IKUBANNI

  60. Chemical and Mechanical Properties of Reinforcing Steel Bars from Local Steel Plants

    Article • Journal of Failure Analysis and Prevention, August 2019, Springer Science + Business Media

    Dr. Peter IKUBANNI , Dr Adekunle A Adeleke

  61. Densification of coal fines and mildly torrefied biomass into composite fuel using different organic binders

    Article • Heliyon, July 2019, Elsevier

    Dr. Peter IKUBANNI , Dr Adekunle A Adeleke

  62. Mild Pyrolytic Treatment of Gmelina arborea for Optimum Energetic Yields

    Article • Cogent Engineering, March 2019, Taylor & Francis

    Dr. Peter IKUBANNI , Dr Adekunle A Adeleke

  63. Reliability and power loss analysis: A case study of a power plant in Nigeria

    Article • Cogent Engineering, February 2019, Taylor & Francis

    Dr. Peter IKUBANNI

  64. Comparative analysis of anthropometric data of Hausas in northern and southern Nigeria

    Article • Istrazivanja i projektovanja za privredu, January 2019, Centre for Evaluation in Education and Science (CEON/CEES)

    Dr. Peter IKUBANNI , Dr Adekunle A Adeleke

  65. Performance Evaluation of Solar Cooker Made from Locally Sourced Materials

    Article • International Journal of Mechanical and Production Engineering Research and Development, January 2019, Transstellar Journal Publications and Research Consultancy Private Limited

    Dr Adekunle A Adeleke, Dr. Peter IKUBANNI

  66. Dataset for the development of a diagnostic schedule for a defective LC-195V5 CNC milling machine at FUTA central workshop

    Article • Data in Brief, December 2018, Elsevier

    Dr. Peter IKUBANNI

  67. Dataset on the evaluation of chemical and mechanical properties of steel rods from local steel plants and collapsed building sites

    Article • Data in Brief, December 2018, Elsevier

    Dr. Peter IKUBANNI , Dr Adekunle A Adeleke

  68. Effect of stand-off height on the shear strength of ball grid array solder joints under varying pad sizes

    Article • SN Applied Sciences, November 2018, Springer Science + Business Media

    Dr. Peter IKUBANNI

  69. Physico-Mechanical Properties of Particleboards Produced from Locally Sourced Materials

    Article • International Journal of Engineering Research in Africa, November 2018, Trans Tech Publications

    Dr. Peter IKUBANNI , Adesoji Adediran, Dr Adekunle A Adeleke

  70. Data on mechanical properties evaluation of medium carbon steel quenched in different waste media

    Article • Data in Brief, October 2018, Elsevier

    Dr. Peter IKUBANNI , Dr Adekunle A Adeleke

  71. Mechanical Properties Improvement Evaluation of Medium Carbon Steels Quenched in Different Media

    Article • International Journal of Engineering Research in Africa, September 2017, Trans Tech Publications

    Dr. Peter IKUBANNI , Dr Adekunle A Adeleke, Adesoji Adediran

  72. Generation of Calibration Charts for Horizontal Petroleum Storage Tanks Using Microsoft Excel

    Article • MAPAN, August 2017, Springer Science + Business Media

    Dr. Peter IKUBANNI

  73. Development of Pedal Operated Honey Extractor

    Article • British Journal of Applied Science & Technology, January 2016, Sciencedomain International

    Dr. Peter IKUBANNI

  74. Parameters Determination for the Design of Bevel Gears Using Computer Aided Design (Bevel CAD)

    Article • British Journal of Mathematics & Computer Science, January 2015, Sciencedomain International

    Dr. Peter IKUBANNI