All Stories

  1. Optimization and sensitivity analysis of drilling parameters for sustainable machining of carbon fiber–reinforced polypropylene composites

    Article • Journal of Thermoplastic Composite Materials, September 2018, SAGE Publications

    Professor Palanikumar Kayaroganam

  2. Analysis on drilling of woven glass fibre reinforced aluminium sandwich laminates

    Article • Journal of Materials Research and Technology, September 2018, Elsevier

    Professor Palanikumar Kayaroganam

  3. Optimization of squeeze cast process parameters on mechanical properties of Al2O3/SiC reinforced hybrid metal matrix composites using taguchi technique

    Article • Materials Research Express, June 2018, Institute of Physics Publishing

    Professor Palanikumar Kayaroganam

  4. Mechanical Properties Evaluation of Unidirectional Glass Fibre Reinforced Aluminium Sandwich Laminate

    Article • Silicon, June 2018, Springer Science + Business Media

    Professor Palanikumar Kayaroganam

  5. Influence of drilling process parameters on hybrid vinyl ester composite

    Article • Materials and Manufacturing Processes, March 2018, Taylor & Francis

    Professor Palanikumar Kayaroganam

  6. Influence of carbon nano tubes on mechanical, metallurgical and tribological behavior of magnesium nanocomposites

    Article • Journal of Magnesium and Alloys, September 2017, Elsevier

    Mr Vigneshwar M, Professor Palanikumar Kayaroganam

  7. Nanoclay Addition and Core Materials Effect on Impact and Damage Tolerance Capability of Glass Fiber Skin Sandwich Laminates

    Article • Silicon, April 2017, Springer Science + Business Media

    Professor Palanikumar Kayaroganam

  8. Investigation on mechanical properties of woven alovera/sisal/kenaf fibres and their hybrid composites

    Article • Bulletin of Materials Science, January 2017, Springer Science + Business Media

    Professor Palanikumar Kayaroganam

  9. Dynamic Analysis of OMMT Nanoparticle Reinforced Polyester Resin GFR-PS Foam Sandwich Laminates

    Article • Indian Journal of Science and Technology, December 2016, Indian Society for Education and Environment

    Professor Palanikumar Kayaroganam

  10. Evaluation of Mechanical and Interfacial Properties of Sisal/Jute/Glass Hybrid Fiber Reinforced Polymer Composites

    Article • Transactions of the Indian Institute of Metals, March 2016, Springer Science + Business Media

    Professor Palanikumar Kayaroganam

  11. Experimental Investigation and Analysis on Thrust Force in Drilling of Wood Composite Medium Density Fiberboard Panels

    Article • Experimental Techniques, February 2016, Springer Science + Business Media

    Professor Palanikumar Kayaroganam, Dr. T.N.Valarmathi T.N. VALARMATHI

  12. The Hybride dual matrix reinforcement and study sintered MWCNT&B4c with AL

    Article • Applied Mechanics and Materials, November 2015, Trans Tech Publications

    Professor Palanikumar Kayaroganam, sundaram S Dhandapani

  13. Influence of fiber orientation and fiber content on properties of sisal-jute-glass fiber-reinforced polyester composites

    Article • Journal of Applied Polymer Science, October 2015, Wiley

    Professor Palanikumar Kayaroganam, Dr Manickam Ramesh

  14. Mechanical Properties Evaluation of the Carbon Fibre Reinforced Aluminium Sandwich Composites

    Article • Materials Research, October 2015, FapUNIFESP (SciELO)

    Professor Palanikumar Kayaroganam

  15. Experimental Investigation of Machining Parameters during Turning of AISI 316L Stainless Steel Using Nano Cutting Environment

    Article • Applied Mechanics and Materials, August 2015, Trans Tech Publications

    Professor Palanikumar Kayaroganam

  16. Synthesis and characterization of dual particle (MWCT+B4C) reinforced sintered hybrid aluminum matrix composites

    Article • Particulate Science And Technology, July 2015, Taylor & Francis

    Professor Palanikumar Kayaroganam

  17. Comparison of the Wear Properties of Polymer Composites Having CNT With and Without Glass Fiber Reinforcement

    Article • Transactions of the Indian Institute of Metals, July 2015, Springer Science + Business Media

    Professor Palanikumar Kayaroganam

  18. Study of sandwich effect on nanoclay modified polyester resin GFR face sheet laminates

    Article • Composite Structures, July 2015, Elsevier

    Professor Palanikumar Kayaroganam

  19. Tensile Property of Glass Fiber Reinforced Plastic and Aluminium Stack

    Article • Applied Mechanics and Materials, June 2015, Trans Tech Publications

    Professor Palanikumar Kayaroganam, Mrs. Ramya Devi G

  20. Tensile Properties of Natural Fiber Reinforced Polymers: An Overview

    Article • Applied Mechanics and Materials, June 2015, Trans Tech Publications

    Professor Palanikumar Kayaroganam

  21. Tensile and Flexural Properties of Glass Fibre Reinforced Nano Polymer Composite Panels

    Article • Applied Mechanics and Materials, June 2015, Trans Tech Publications

    Professor Palanikumar Kayaroganam, DR SENGOTTUVEL P PONNUSAMY

  22. Synthesis and Characterization of Multi Wall Carbon Nanotube (MWCNT) Filled Hybrid Banana-Glass Fiber Reinforced Composites

    Article • Applied Mechanics and Materials, June 2015, Trans Tech Publications

    Professor Palanikumar Kayaroganam

  23. Sensitivity Analysis of Friction Welding Process Parameters on Tensile Properties of ASS304L Alloy

    Article • Applied Mechanics and Materials, June 2015, Trans Tech Publications

    Professor Palanikumar Kayaroganam

  24. Roundness Error Evaluation in Drilling of Glass Fiber Reinforced Polypropylene (GFR/PP) Composites Using Box Behnken Design (BBD)

    Article • Applied Mechanics and Materials, June 2015, Trans Tech Publications

    Professor Palanikumar Kayaroganam

  25. Processing and Mechanical Property Evaluation of Kenaf-Glass Fiber Reinforced Polymer Composites

    Article • Applied Mechanics and Materials, June 2015, Trans Tech Publications

    Professor Palanikumar Kayaroganam, Dr Manickam Ramesh

  26. Processing and Mechanical Property Evaluation of Flax-Glass Fiber Reinforced Polymer Composites

    Article • Applied Mechanics and Materials, June 2015, Trans Tech Publications

    Professor Palanikumar Kayaroganam, Dr Manickam Ramesh

  27. Predicting the Best Tensile Strength of Banana-Bamboo-Glass Fiber Reinforced Natural Fiber Composites Using Taguchi Method

    Article • Applied Mechanics and Materials, June 2015, Trans Tech Publications

    Professor Palanikumar Kayaroganam

  28. Predicting the Best Flexural Strength of Banana-Bamboo-Glass Fiber Reinforced Natural Fiber Composites Using Taguchi Method

    Article • Applied Mechanics and Materials, June 2015, Trans Tech Publications

    Professor Palanikumar Kayaroganam

  29. Modeling of Surface Roughness in Drilling of MDF Panels

    Article • Applied Mechanics and Materials, June 2015, Trans Tech Publications

    Professor Palanikumar Kayaroganam, Dr. T.N.Valarmathi T.N. VALARMATHI

  30. Modeling and Analysis of Cutting Force in Turning of AISI 316L Stainless Steel (SS) under Nano Cutting Environment

    Article • Applied Mechanics and Materials, June 2015, Trans Tech Publications

    Professor Palanikumar Kayaroganam

  31. Mechanical Characteristics of Woven Banana and Glass Fiber Epoxy Composites

    Article • Applied Mechanics and Materials, June 2015, Trans Tech Publications

    Professor Palanikumar Kayaroganam, Mr SHADARACH A JEYA SEKARAN

  32. Mechanical & Thermal Properties of Sisal Epoxy/Banana Epoxy Composites - A Review

    Article • Applied Mechanics and Materials, June 2015, Trans Tech Publications

    Professor Palanikumar Kayaroganam

  33. Material Characteristics of Fabricated Resin Carbon Nanotube Reinforced and Resin Glass Fiber Carbon Nanotube Reinforced Composites

    Article • Applied Mechanics and Materials, June 2015, Trans Tech Publications

    Professor Palanikumar Kayaroganam

  34. Influence of Process Parameter on Microstructural Characteristics and Tensile Properties of Friction Welded ASS304L Alloy

    Article • Applied Mechanics and Materials, June 2015, Trans Tech Publications

    Professor Palanikumar Kayaroganam

  35. Hard Turning of AISI D2 Steel by Polycrystalline Cubic Boron Nitride (PCBN)

    Article • Applied Mechanics and Materials, June 2015, Trans Tech Publications

    Professor Palanikumar Kayaroganam, Srithar A anbazhagan

  36. Fuzzy Modeling of Surface Roughness Parameters in Machining Ti-6Al-4V Alloy

    Article • Applied Mechanics and Materials, June 2015, Trans Tech Publications

    Professor Palanikumar Kayaroganam, jaganathan nithyanandam

  37. Flexural and Impact Properties of 2D and 3D Jute/GF/Epoxy Hybrid Composite Materials

    Article • Applied Mechanics and Materials, June 2015, Trans Tech Publications

    Professor Palanikumar Kayaroganam, DR SENGOTTUVEL P PONNUSAMY

  38. Effect of Volume Fraction on Surface Roughness in Turning of Hybrid Metal Matrix (A6061 A1+SiC+Graphite) Composites

    Article • Applied Mechanics and Materials, June 2015, Trans Tech Publications

    Professor Palanikumar Kayaroganam

  39. Effect of Silicon Carbide (SiC) on Stir Cast Aluminium Metal Matrix Hybrid Composites – A Review

    Article • Applied Mechanics and Materials, June 2015, Trans Tech Publications

    Professor Palanikumar Kayaroganam

  40. Developing the Empirical Relationship to Predict the Minimum Microhardness of AISI 1020 Grade Low Carbon Steel Joints

    Article • Applied Mechanics and Materials, June 2015, Trans Tech Publications

    Professor Palanikumar Kayaroganam

  41. Cutting Force Analysis in Drilling of Al6061/Mica Particulate Composite

    Article • Applied Mechanics and Materials, June 2015, Trans Tech Publications

    Professor Palanikumar Kayaroganam

  42. aluminium metal matrix composites

    Article • Applied Mechanics and Materials, June 2015, Trans Tech Publications

    Professor Palanikumar Kayaroganam, Mrs Padmavathi K.R. sivakumar

  43. Properties of AMMC before and after heat treatment

    Article • Applied Mechanics and Materials, June 2015, Trans Tech Publications

    Professor Palanikumar Kayaroganam, Mr. Dilip N Raja

  44. Synthesis and Characterization of Multi Wall Carbon Nanotubes (MWCNT) Reinforced Sintered Magnesium Matrix Composites

    Article • Journal of The Institution of Engineers (India) Series D, May 2015, Springer Science + Business Media

    Professor Palanikumar Kayaroganam

  45. Influence of Cutting Parameters in Machining of Titanium Alloy

    Article • Indian Journal of Science and Technology, April 2015, Indian Society for Education and Environment

    Professor Palanikumar Kayaroganam

  46. Analysis of friction welding parameters on the mechanical metallurgical and chemical properties of AISI 1035 steel joints

    Article • Materials & Design (1980-2015), January 2015, Elsevier

    Professor Palanikumar Kayaroganam

  47. Thrust Force Analysis in Drilling Glass Fiber Reinforced/Polypropylene (GFR/PP) Composites

    Article • Materials and Manufacturing Processes, October 2014, Taylor & Francis

    Professor Palanikumar Kayaroganam

  48. Surface Roughness Optimization in Machining of Titanium Alloy (Ti-6Al-4V)

    Article • Advanced Materials Research, July 2014, Trans Tech Publications

    Professor Palanikumar Kayaroganam

  49. Tensile Property Evaluation of Carbon Fiber Reinforced Aluminium Sandwich Composites

    Article • Advanced Materials Research, July 2014, Trans Tech Publications

    Professor Palanikumar Kayaroganam

  50. Worn Surface Analysis of Hybrid Metal Matrix Composite

    Article • Advanced Materials Research, July 2014, Trans Tech Publications

    Professor Palanikumar Kayaroganam

  51. Optimizing the friction welding parameters to attain maximum tensile strength in AISI 1035 grade carbon steel rods

    Article • Measurement, July 2014, Elsevier

    Professor Palanikumar Kayaroganam

  52. The Microhardness Analysis of Friction Welded AISI 52100 Grade Carbon Steel Joints

    Article • Advanced Materials Research, July 2014, Trans Tech Publications

    Professor Palanikumar Kayaroganam

  53. Influence of Process Parameters on Delamination of Drilling of (GF/PC) Glass Fiber Reinforced Polycarbonate Matrix Composites

    Article • Advanced Materials Research, July 2014, Trans Tech Publications

    Professor Palanikumar Kayaroganam

  54. Experimental Investigation and Analysis on Hard Turning of AISI D2 Steel Using Coated Carbide Insert

    Article • Advanced Materials Research, July 2014, Trans Tech Publications

    Professor Palanikumar Kayaroganam, Srithar A anbazhagan

  55. Effect of Hardness on the Wear Behavior of Hybrid Metal Matrix Composites

    Article • Advanced Materials Research, July 2014, Trans Tech Publications

    Professor Palanikumar Kayaroganam

  56. Developing a Mathematical Model to Predict Tensile Properties of Friction Welded AISI 1035 Grade Steel Rods

    Article • Advanced Materials Research, July 2014, Trans Tech Publications

    Professor Palanikumar Kayaroganam

  57. Experimental investigation and analysis of thrust force in drilling cast hybrid metal matrix (Al–15%SiC–4%graphite) composites

    Article • Measurement, July 2014, Elsevier

    Professor Palanikumar Kayaroganam

  58. Analysis of AISI 1035 Grade Joints Welded Frictionally with Varying Forging Pressure

    Article • Applied Mechanics and Materials, July 2014, Trans Tech Publications

    Professor Palanikumar Kayaroganam

  59. Developing Empirical Relationships to Predict Tensile Properties of Friction Welded AISI 52100 Grade Steel Rods

    Article • Applied Mechanics and Materials, July 2014, Trans Tech Publications

    Professor Palanikumar Kayaroganam

  60. Impact Behaviour Analysis of Sisal/Jute and Glass Fiber Reinforced Hybrid Composites

    Article • Advanced Materials Research, July 2014, Trans Tech Publications

    Professor Palanikumar Kayaroganam

  61. Analysis on influence of machining parameters on thrust force in drilling GFRP-armor steel sandwich composites

    Article • Journal of Composite Materials, May 2014, SAGE Publications

    Professor Palanikumar Kayaroganam

  62. Synthesis and characterization of sintered hybrid aluminium matrix composites reinforced with nanocopper oxide particles and microsilicon carbide particles

    Article • Composites Part B Engineering, March 2014, Elsevier

    Professor Palanikumar Kayaroganam

  63. Effect of nanomodified polyester resin on hybrid sandwich laminates

    Article • Materials & Design (1980-2015), February 2014, Elsevier

    Professor Palanikumar Kayaroganam

  64. Modeling and optimization in tribological parameters of polyether ether ketone matrix composites using D-optimal design

    Article • Journal of Thermoplastic Composite Materials, January 2014, SAGE Publications

    Professor Palanikumar Kayaroganam

  65. Surface Roughness Analysis in Turning of Titanium Alloy by Nanocoated Carbide Insert

    Article • Procedia Materials Science, January 2014, Elsevier

    Professor Palanikumar Kayaroganam

  66. Influence of Tool Materials on Thrust Force and Delamination in Drilling Sisal-glass Fiber Reinforced Polymer (S-GFRP) Composites

    Article • Procedia Materials Science, January 2014, Elsevier

    Professor Palanikumar Kayaroganam

  67. Influence of Thrust Force in Drilling of Glass Fiber Reinforced Polycarbonate (GFR/PC) Thermoplastic Matrix Composites Using Box-behnken Design

    Article • Procedia Materials Science, January 2014, Elsevier

    Professor Palanikumar Kayaroganam

  68. Experimental Investigation and Analysis on Thrust Force in Drilling of Wood Composite Medium Density Fiberboard Panels

    Article • Experimental Techniques, January 2014, Springer Science + Business Media

    Professor Palanikumar Kayaroganam, Dr. T.N.Valarmathi T.N. VALARMATHI

  69. Dry Sliding Wear Behaviour of AA6061-T6 Reinforced SiC and Al2O3 Particulate Hybrid Composites

    Article • Procedia Engineering, January 2014, Elsevier

    Professor Palanikumar Kayaroganam

  70. Experimental Investigation and Surface roughness Analysis on Hard turning of AISI D2 Steel using Coated Carbide Insert

    Article • Procedia Engineering, January 2014, Elsevier

    Professor Palanikumar Kayaroganam, Srithar A anbazhagan

  71. Fuzzy rule-based modeling of machining parameters for surface roughness in turning carbon particle-reinforced polyamide

    Article • Journal of Thermoplastic Composite Materials, November 2013, SAGE Publications

    Professor Palanikumar Kayaroganam

  72. Mechanical Properties of AISI 316L Austenitic Stainless Steels Welded by GTAW

    Article • Advanced Materials Research, November 2013, Trans Tech Publications

    Professor Palanikumar Kayaroganam

  73. Analysis of dry sliding wear behaviour of Al6061/SiC/Al2O3 hybrid metal matrix composites

    Article • Composites Part B Engineering, October 2013, Elsevier

    Professor Palanikumar Kayaroganam

  74. Mechanical and machinability behaviors of woven coir fiber-reinforced polyester composite

    Article • Fibers and Polymers, September 2013, Springer Science + Business Media

    Dr Velumani Subramaniam, Professor Palanikumar Kayaroganam

  75. Evaluation of mechanical and wear properties of hybrid aluminium matrix composites

    Article • Transactions of Nonferrous Metals Society of China, September 2013, Elsevier

    Professor Palanikumar Kayaroganam

  76. Sliding wear of LM25 aluminium alloy with 7.5% SiC+2.5% TiO2 and 2.5% SiC+7.5% TiO2 hybrid composites

    Article • Journal of Composite Materials, July 2013, SAGE Publications

    Professor Palanikumar Kayaroganam

  77. Synthesis and characterization of nano filled carbon fiber reinforced composites

    Article • July 2013, Institute of Electrical & Electronics Engineers (IEEE)

    Professor Palanikumar Kayaroganam

  78. Application of Artificial Neural Network for the Prediction of Surface Roughness in Drilling GFRP Composites

    Article • Materials Science Forum, July 2013, Trans Tech Publications

    Professor Palanikumar Kayaroganam

  79. Grey-fuzzy algorithm to optimise machining parameters in drilling of hybrid metal matrix composites

    Article • Composites Part B Engineering, July 2013, Elsevier

    Professor Palanikumar Kayaroganam

  80. Role of carbon nanotubes (CNTs) in improving wear properties of polypropylene (PP) in dry sliding condition

    Article • Materials & Design (1980-2015), June 2013, Elsevier

    Professor Palanikumar Kayaroganam

  81. Mechanical property evaluation of sisal–jute–glass fiber reinforced polyester composites

    Article • Composites Part B Engineering, May 2013, Elsevier

    Professor Palanikumar Kayaroganam

  82. Application of the central composite design in optimization of machining parameters in drilling hybrid metal matrix composites

    Article • Measurement, May 2013, Elsevier

    Professor Palanikumar Kayaroganam

  83. Measurement and analysis of thrust force in drilling of particle board (PB) composite panels

    Article • Measurement, April 2013, Elsevier

    Professor Palanikumar Kayaroganam, Dr. T.N.Valarmathi T.N. VALARMATHI

  84. Analysis of delamination in drilling glass fiber reinforced polyester composites

    Article • Materials & Design (1980-2015), March 2013, Elsevier

    Professor Palanikumar Kayaroganam

  85. Investigation on the Turning Parameters for Surface Roughness using Taguchi Analysis

    Article • Procedia Engineering, January 2013, Elsevier

    Professor Palanikumar Kayaroganam

  86. Electrical discharge machining: study on machining characteristics of WC/Co composites

    Article • January 2013, Elsevier

    Professor Palanikumar Kayaroganam

  87. Simulation Analysis of Combustion Parameters and Emission Characteristics of CNG Fueled HCCI Engine

    Article • Advances in Mechanical Engineering, January 2013, SAGE Publications

    Professor Palanikumar Kayaroganam

  88. Influence of Machining Parameters on Delamination in Drilling of GFRP-armour Steel Sandwich Composites

    Article • Procedia Engineering, January 2013, Elsevier

    Professor Palanikumar Kayaroganam

  89. Comparative Evaluation on Properties of Hybrid Glass Fiber- Sisal/Jute Reinforced Epoxy Composites

    Article • Procedia Engineering, January 2013, Elsevier

    Professor Palanikumar Kayaroganam

  90. Influence of Nano Particle on Flexural and Impact Properties of Sandwich Structures

    Article • Advanced Materials Research, December 2012, Trans Tech Publications

    Professor Palanikumar Kayaroganam

  91. Delamination in Drilling of GFR/High Impact Polystyrene Omposites

    Article • Advanced Materials Research, December 2012, Trans Tech Publications

    Professor Palanikumar Kayaroganam

  92. Thrust Force Studies in Drilling of Medium Density Fiberboard Panels

    Article • Advanced Materials Research, December 2012, Trans Tech Publications

    Professor Palanikumar Kayaroganam, Dr. T.N.Valarmathi T.N. VALARMATHI

  93. Influence of Machining Parameters on Diameter Error in Drilling of GFRP – Armour Steel Sandwich Composites

    Article • Advanced Materials Research, November 2012, Trans Tech Publications

    Professor Palanikumar Kayaroganam

  94. Influence of Cutting Parameters on Torque in Drilling of Al-15%SiC-4% Graphite Metal Matrix Composites

    Article • Advanced Materials Research, November 2012, Trans Tech Publications

    Professor Palanikumar Kayaroganam

  95. Experimental Studies on Surface Roughness in Drilling MDF Composite Panels using Taguchi and Regression Analysis Method

    Article • Journal of Applied Sciences, October 2012, Science Alert

    Professor Palanikumar Kayaroganam

  96. Analysis of Surface Integrity in Drilling Metal Matrix and Hybrid Metal Matrix Composites

    Article • Journal of Material Science and Technology, August 2012, Elsevier

    Professor Palanikumar Kayaroganam

  97. Effect of Electrical Discharge Machining on strength and reliability of WC–30%Co composite

    Article • Materials & Design (1980-2015), August 2012, Elsevier

    Professor Palanikumar Kayaroganam

  98. Measurement and analysis of surface roughness in turning of aerospace titanium alloy (gr5)

    Article • Measurement, June 2012, Elsevier

    Professor Palanikumar Kayaroganam

  99. Optimization of machining parameters in drilling hybrid aluminium metal matrix composites

    Article • Transactions of Nonferrous Metals Society of China, June 2012, Elsevier

    Professor Palanikumar Kayaroganam

  100. Application of grey fuzzy logic for the optimization of drilling parameters for CFRP composites with multiple performance characteristics

    Article • Measurement, June 2012, Elsevier

    Professor Palanikumar Kayaroganam

  101. Modeling and analysis of performances in drilling hybrid metal matrix composites using D-optimal design

    Article • The International Journal of Advanced Manufacturing Technology, April 2012, Springer Science + Business Media

    Professor Palanikumar Kayaroganam

  102. Optimization of Machining Parameters for Surface Roughness and Burr Height in Drilling Hybrid Composites

    Article • Materials and Manufacturing Processes, March 2012, Taylor & Francis

    Professor Palanikumar Kayaroganam

  103. Analysis on Drilling of Glass Fiber–Reinforced Polymer (GFRP) Composites Using Grey Relational Analysis

    Article • Materials and Manufacturing Processes, March 2012, Taylor & Francis

    Professor Palanikumar Kayaroganam

  104. Analyzing surface quality in machined composites

    Article • January 2012, Elsevier

    Professor Palanikumar Kayaroganam

  105. Turning CFRP Composites with Ceramic tool for Surface Roughness Analysis

    Article • Procedia Engineering, January 2012, Elsevier

    Professor Palanikumar Kayaroganam

  106. Thrust force evaluation in drilling medium density fibre (MDF) panels using design of experiments

    Article • International Journal of Manufacturing Technology and Management, January 2012, Inderscience Publishers

    Professor Palanikumar Kayaroganam

  107. Surface Roughness Evaluation in Drilling Hybrid Metal Matrix Composites

    Article • January 2012, Springer Science + Business Media

    Professor Palanikumar Kayaroganam

  108. Optimizing the Machining Parameters for Minimum Burr Height in Drilling of Hybrid Composites

    Article • Procedia Engineering, January 2012, Elsevier

    Professor Palanikumar Kayaroganam

  109. Optimization of Machining Parameters in Electrical Discharge Machining (EDM) of 304 Stainless Steel

    Article • Procedia Engineering, January 2012, Elsevier

    Professor Palanikumar Kayaroganam

  110. Modelling and Analysis of Thrust Force in Drilling of GFRP Composites Using Response Surface Methodology (RSM)

    Article • Procedia Engineering, January 2012, Elsevier

    Professor Palanikumar Kayaroganam

  111. Modeling of Thrust Force in Drilling of Plain Medium Density Fiberboard (MDF) Composite Panels Using RSM

    Article • Procedia Engineering, January 2012, Elsevier

    Professor Palanikumar Kayaroganam, Dr. T.N.Valarmathi T.N. VALARMATHI

  112. Experimental investigation and optimisation in drilling of GFRP composites

    Article • Measurement, December 2011, Elsevier

    Professor Palanikumar Kayaroganam

  113. Experimental studies on machining characteristics of hybrid aluminium metal matrix composite and carbon nano tubes added hybrid aluminium metal matrix composite

    Article • November 2011, Institute of Electrical & Electronics Engineers (IEEE)

    Professor Palanikumar Kayaroganam

  114. Experimental investigation and analysis in turning of CFRP composites

    Article • Journal of Composite Materials, October 2011, SAGE Publications

    Professor Palanikumar Kayaroganam

  115. Modeling and analysis of roundness error in friction drilling of aluminum silicon carbide metal matrix composite

    Article • Journal of Composite Materials, October 2011, SAGE Publications

    Professor Palanikumar Kayaroganam

  116. Optimization of machining parameters for multi-performance characteristics in drilling hybrid metal matrix composites

    Article • Journal of Composite Materials, September 2011, SAGE Publications

    Professor Palanikumar Kayaroganam

  117. Modeling and analysis of surface roughness on machining of Nimonic C-263 alloy by PVD coated carbide insert

    Article • Transactions of Nonferrous Metals Society of China, September 2011, Elsevier

    Professor Palanikumar Kayaroganam

  118. Experimental Investigation and Analysis of Thrust Force in Drilling Hybrid Metal Matrix Composites by Coated Carbide Drills

    Article • Materials and Manufacturing Processes, August 2011, Taylor & Francis

    Professor Palanikumar Kayaroganam

  119. Assessment of Factors Influencing Tool Wear on the Machining of Nimonic C-263 Alloy with PVD Coated Carbide Inserts

    Article • Advanced Materials Research, July 2011, Trans Tech Publications

    Professor Palanikumar Kayaroganam

  120. MODELING AND OPTIMIZATION OF PROCESS PARAMETERS FOR DELAMINATION IN DRILLING GLASS FIBER REINFORCED PLASTIC (GFRP) COMPOSITES

    Article • Machining Science and Technology, April 2011, Taylor & Francis

    Professor Palanikumar Kayaroganam

  121. Flow stress modeling of AZ91 magnesium alloys at elevated temperature

    Article • Journal of Alloys and Compounds, April 2011, Elsevier

    Professor Palanikumar Kayaroganam

  122. Influence of drill geometry on thrust force in drilling GFRP composites

    Article • Journal of Reinforced Plastics and Composites, March 2011, SAGE Publications

    Professor Palanikumar Kayaroganam

  123. Application of fuzzy logic for modeling surface roughness in turning CFRP composites using CBN tool

    Article • Production Engineering, February 2011, Springer Science + Business Media

    Professor Palanikumar Kayaroganam

  124. Surface roughness analysis on machining of nimonic C-263 alloy using ANN and RSM techniques

    Article • International Journal of Precision Technology, January 2011, Inderscience Publishers

    Professor Palanikumar Kayaroganam

  125. Experimental investigation on roundness error in friction drilling and mechanical properties of Al/SiCp-MMC composites

    Article • Mécanique & Industries, January 2011, EDP Sciences

    Professor Palanikumar Kayaroganam

  126. Analysis of the Machining Characteristics on Surface Roughness of a Hybrid Aluminium Metal Matrix Composite (Al6061-SiC-Al<sub>2</sub>O<sub>3</sub>)

    Article • Journal of Minerals and Materials Characterization and Engineering, January 2011, Scientific Research Publishing, Inc,

    Professor Palanikumar Kayaroganam

  127. Modeling for prediction of surface roughness in drilling MDF panels using response surface methodology

    Article • Journal of Composite Materials, December 2010, SAGE Publications

    Professor Palanikumar Kayaroganam

  128. Modeling and Analysis of Delamination Factor and Surface Roughness in Drilling GFRP Composites

    Article • Materials and Manufacturing Processes, December 2010, Taylor & Francis

    Professor Palanikumar Kayaroganam

  129. A mathematical model to predict thrust force in drilling hybrid metal matrix composites

    Article • November 2010, Institute of Electrical & Electronics Engineers (IEEE)

    Professor Palanikumar Kayaroganam

  130. Characteristics of re-inforced Carbon-Carbon

    Article • November 2010, Institute of Electrical & Electronics Engineers (IEEE)

    Professor Palanikumar Kayaroganam

  131. Prediction of surface roughness parameters in drilling of MDF composite panel using Box-Behnken experimental design (BBD)

    Article • November 2010, Institute of Electrical & Electronics Engineers (IEEE)

    Professor Palanikumar Kayaroganam

  132. Modeling of thrust force in drilling of CFRP composites using adaptive neuro fuzzy inference system

    Article • November 2010, Institute of Electrical & Electronics Engineers (IEEE)

    Professor Palanikumar Kayaroganam

  133. Influence of silicon carbide particulate reinforcement on the Fracture toughness of Al 6061 alloy composites produced by stir casting method

    Article • November 2010, Institute of Electrical & Electronics Engineers (IEEE)

    Professor Palanikumar Kayaroganam

  134. Influence of machining parameters on surface roughness and material removal rate in machining carbon fiber reinforced polymer material

    Article • November 2010, Institute of Electrical & Electronics Engineers (IEEE)

    Professor Palanikumar Kayaroganam

  135. Analysis and optimisation of cutting parameters for surface roughness in machining Al/SiC particulate composites by PCD tool

    Article • International Journal of Materials and Product Technology, January 2010, Inderscience Publishers

    Professor Palanikumar Kayaroganam

  136. Studies on Mechanical Characterization of Polypropylene/Na<sup>+</sup>-MMT Nanocomposites

    Article • Journal of Minerals and Materials Characterization and Engineering, January 2010, Scientific Research Publishing, Inc,

    Professor Palanikumar Kayaroganam

  137. Experimental Investigation and Analysis on Delamination in Drilling of Wood Composite Medium Density Fiber Boards

    Article • Materials and Manufacturing Processes, December 2009, Taylor & Francis

    Professor Palanikumar Kayaroganam

  138. Delamination Analysis in Drilling of CFRP Composites Using Response Surface Methodology

    Article • Journal of Composite Materials, August 2009, SAGE Publications

    Professor Palanikumar Kayaroganam

  139. Prediction of the flow stress of 6061 Al–15% SiC – MMC composites using adaptive network based fuzzy inference system

    Article • Materials & Design (1980-2015), April 2009, Elsevier

    Professor Palanikumar Kayaroganam

  140. Multiple performance optimization in machining of GFRP composites by a PCD tool using non-dominated sorting genetic algorithm (NSGA-II)

    Article • Metals and Materials International, April 2009, Springer Science + Business Media

    Professor Palanikumar Kayaroganam

  141. Optimization of delamination factor in drilling medium-density fiberboards (MDF) using desirability-based approach

    Article • The International Journal of Advanced Manufacturing Technology, February 2009, Springer Science + Business Media

    Professor Palanikumar Kayaroganam

  142. Experimental study on machining of titanium alloy (Ti64) by CVD and PVD coated carbide inserts

    Article • International Journal of Manufacturing Technology and Management, January 2009, Inderscience Publishers

    Professor Palanikumar Kayaroganam

  143. Assessment of some factors influencing tool wear on the machining of glass fibre-reinforced plastics by coated cemented carbide tools

    Article • Journal of Materials Processing Technology, January 2009, Elsevier

    Professor Palanikumar Kayaroganam

  144. Application of goal programming technique for Electro Discharge Machining (EDM) characteristics of cemented carbide (WC/Co)

    Article • International Journal of Materials and Product Technology, January 2009, Inderscience Publishers

    Professor Palanikumar Kayaroganam

  145. SURFACE ROUGHNESS PARAMETERS OPTIMIZATION IN MACHINING A356/SiC/20pMETAL MATRIX COMPOSITES BY PCD TOOL USING RESPONSE SURFACE METHODOLOGY AND DESIRABILITY FUNCTION

    Article • Machining Science and Technology, December 2008, Taylor & Francis

    Professor Palanikumar Kayaroganam

  146. Evaluation of Delamination in Drilling GFRP Composites

    Article • Materials and Manufacturing Processes, October 2008, Taylor & Francis

    Professor Palanikumar Kayaroganam

  147. Influence of Drill Point Angle in High Speed Drilling of Glass Fiber Reinforced Plastics

    Article • Journal of Composite Materials, October 2008, SAGE Publications

    Professor Palanikumar Kayaroganam

  148. Analysis of surface roughness parameters in turning of FRP tubes by PCD tool

    Article • Journal of Materials Processing Technology, August 2008, Elsevier

    Professor Palanikumar Kayaroganam

  149. Wear Mechanism of Glass Fiber Reinforced Epoxy Composites Under Dry Sliding Using Fuzzy Clustering Technique

    Article • Journal of Reinforced Plastics and Composites, July 2008, SAGE Publications

    Professor Palanikumar Kayaroganam

  150. Influence of process parameters on electric discharge machining of WC/30%Co composites

    Article • Proceedings of the Institution of Mechanical Engineers Part B Journal of Engineering Manufacture, July 2008, SAGE Publications

    Professor Palanikumar Kayaroganam

  151. Surface Roughness Model for Machining Glass Fiber Reinforced Plastics by PCD Tool using Fuzzy Logics

    Article • Journal of Reinforced Plastics and Composites, June 2008, SAGE Publications

    Professor Palanikumar Kayaroganam

  152. Statistical Analysis of Delamination in Drilling Glass Fiber-Reinforced Plastics (GFRP)

    Article • Journal of Reinforced Plastics and Composites, June 2008, SAGE Publications

    Professor Palanikumar Kayaroganam

  153. Surface Roughness Parameters Evaluation in Machining GFRP Composites by PCD Tool using Digital Image Processing

    Article • Journal of Reinforced Plastics and Composites, May 2008, SAGE Publications

    Professor Palanikumar Kayaroganam

  154. Fuzzy Modeling and Analysis of Machining Parameters in Machining Titanium Alloy

    Article • Materials and Manufacturing Processes, April 2008, Taylor & Francis

    Professor Palanikumar Kayaroganam

  155. Chatter Suppression in Boring Operation Using Magnetorheological Fluid Damper

    Article • Materials and Manufacturing Processes, April 2008, Taylor & Francis

    Professor Palanikumar Kayaroganam

  156. Modeling of Machining Parameters to Predict Surface Roughness in Machining Al/SiC Particulate Composites by Carbide Insert

    Article • Multidiscipline Modeling in Materials and Structures, April 2008, Emerald

    Professor Palanikumar Kayaroganam

  157. Modeling and Analysis of Cutting Force in Turning of GFRP Composites by CBN Tools

    Article • Journal of Reinforced Plastics and Composites, January 2008, SAGE Publications

    Professor Palanikumar Kayaroganam

  158. Surface Roughness Analysis in Machining of Titanium Alloy

    Article • Materials and Manufacturing Processes, January 2008, Taylor & Francis

    Professor Palanikumar Kayaroganam

  159. Development of an empirical model for surface roughness in the machining of Al/SiC particulate composites by PCD tool

    Article • International Journal of Materials and Product Technology, January 2008, Inderscience Publishers

    Professor Palanikumar Kayaroganam

  160. Application of Probablistic Neural Network for the Development of Wear Mechanism Map for Glass Fiber Reinforced Plastics

    Article • Journal of Reinforced Plastics and Composites, October 2007, SAGE Publications

    Professor Palanikumar Kayaroganam

  161. Optimization of electrical discharge machining characteristics of WC/Co composites using non-dominated sorting genetic algorithm (NSGA-II)

    Article • The International Journal of Advanced Manufacturing Technology, January 2007, Springer Science + Business Media

    Professor Palanikumar Kayaroganam

  162. Assessment of factors influencing surface roughness on the machining of Al/SiC particulate composites

    Article • Materials & Design (1980-2015), January 2007, Elsevier

    Professor Palanikumar Kayaroganam

  163. Modeling and analysis for surface roughness in machining glass fibre reinforced plastics using response surface methodology

    Article • Materials & Design (1980-2015), January 2007, Elsevier

    Professor Palanikumar Kayaroganam

  164. Mathematical model to predict tool wear on the machining of glass fibre reinforced plastic composites

    Article • Materials & Design (1980-2015), January 2007, Elsevier

    Professor Palanikumar Kayaroganam

  165. Optimization of machining parameters in turning GFRP composites using a carbide (K10) tool based on the taguchi method with fuzzy logics

    Article • Metals and Materials International, December 2006, Springer Science + Business Media

    Professor Palanikumar Kayaroganam

  166. OPTIMAL MACHINING CONDITIONS FOR TURNING OF PARTICULATE METAL MATRIX COMPOSITES USING TAGUCHI AND RESPONSE SURFACE METHODOLOGIES

    Article • Machining Science and Technology, December 2006, Taylor & Francis

    Professor Palanikumar Kayaroganam

  167. Multiple Performance Optimization of Machining Parameters on the Machining of GFRP Composites Using Carbide (K10) Tool

    Article • Materials and Manufacturing Processes, December 2006, Taylor & Francis

    Professor Palanikumar Kayaroganam

  168. Application of Taguchi and response surface methodologies for surface roughness in machining glass fiber reinforced plastics by PCD tooling

    Article • The International Journal of Advanced Manufacturing Technology, November 2006, Springer Science + Business Media

    Professor Palanikumar Kayaroganam

  169. Cutting Parameters Optimization for Surface Roughness in Machining of GFRP Composites using Taguchi’s Method

    Article • Journal of Reinforced Plastics and Composites, November 2006, SAGE Publications

    Professor Palanikumar Kayaroganam

  170. Assessment of factors influencing surface roughness on the machining of glass fiber-reinforced polymer composites

    Article • Materials & Design (1980-2015), January 2006, Elsevier

    Professor Palanikumar Kayaroganam

  171. Mathematical Model to Predict the Surface Roughness on the Machining of Glass Fiber Reinforced Polymer Composites

    Article • Journal of Reinforced Plastics and Composites, August 2005, SAGE Publications

    Professor Palanikumar Kayaroganam

  172. Optimal Machining Parameters for Achieving Minimal Tool Wear in Turning Of GFRP Composites

    Article • Journal for Manufacturing Science and Production, September 2004, De Gruyter

    Professor Palanikumar Kayaroganam

  173. 8 Application of response surface method and desirability function for the optimization of machining parameters of hybrid metal matrix (Al/SiC/Al2O3) composites

    Article • De Gruyter

    Professor Palanikumar Kayaroganam

  174. 6. Drilling of high impact polystyrene composites materials

    Article • De Gruyter

    Professor Palanikumar Kayaroganam

  175. Application of Taguchi Method with Grey Fuzzy Logic for the Optimization of Machining Parameters in Machining Composites

    Article • IGI Global

    Professor Palanikumar Kayaroganam