Contact

All Stories

  1. Correction: Explosive Welding and Friction Stir Welding/Processing of Multi-Principal Element Alloys

    Article • Metals and Materials International, October 2023, Springer Science + Business Media

    Dr Olatunji Oladimeji Ojo

  2. Explosive Welding and Friction Stir Welding/Processing of Multi-Principal Element Alloys

    Article • Metals and Materials International, September 2023, Springer Science + Business Media

    Dr Olatunji Oladimeji Ojo

  3. Improving the wear resistance and mechanical properties of hybridized AZ80 Mg/CeO2+ZrO2 surface composite by friction stir processing: Effect of pin geometry

    Article • Vacuum, June 2023, Elsevier

    Dr Olatunji Oladimeji Ojo

  4. Effect of tool profile on wear and mechanical behaviors of CeO2 and ZrO2-reinforced hybrid magnesium matrix composite developed via FSP technique

    Article • Journal of Manufacturing Processes, May 2023, Elsevier

    Dr Olatunji Oladimeji Ojo

  5. Friction stir processing of hybridized AZ31B magnesium alloy-based composites by adding CeO2 and ZrO2powders: mechanical, wear, and corrosion behaviors

    Article • Journal of Materials Research and Technology, May 2023, Elsevier

    Dr Olatunji Oladimeji Ojo

  6. Biocompatibility of biomaterials and test methods: a review

    Article • Materials Testing, April 2023, De Gruyter

    Dr Olatunji Oladimeji Ojo

  7. Probe-less friction stir spot processing (PFSSP) of AA5754/AA5083 joint by adding the B4C ceramics: Effect of shoulder features on mechanical properties and tribological behavior

    Article • Vacuum, January 2023, Elsevier

    Dr Olatunji Oladimeji Ojo

  8. Post-processing treatments–microstructure–performance interrelationship of metal additive manufactured aerospace alloys: a review

    Article • Materials Science and Technology, October 2022, Taylor & Francis

    Dr Olatunji Oladimeji Ojo

  9. Enhancement of mechanical properties and wear of AA5083/316 stainless steel surface-composite developed through multi-pass friction stir processing (MPFSP)

    Article • Archives of Civil and Mechanical Engineering, October 2022, Springer Science + Business Media

    Dr Olatunji Oladimeji Ojo

  10. Impact of multiple FSP passes on structure, mechanical, tribological and corrosion behaviors of AA6061/316 stainless-steel reinforced Al matrix composites

    Article • Surface and Coatings Technology, October 2022, Elsevier

    Dr Olatunji Oladimeji Ojo

  11. Development of AA6061/316 stainless steel surface composites via friction stir processing: Effect of tool rotational speed

    Article • Materials Characterization, October 2022, Elsevier

    Dr Olatunji Oladimeji Ojo

  12. Fabrication of AA6061/316 composites via a double pin FSP tool

    Article • Journal of Materials Research and Technology, September 2022, Elsevier

    Dr Olatunji Oladimeji Ojo

  13. FRACTURE BEHAVIOR AND MECHANICAL PERFORMANCE OF DISSIMILAR FRICTION STIR CLINCHED CU/AL JOINT

    Article • FUTA JOURNAL OF ENGINEERING AND ENGINEERING TECHNOLOGY, May 2022, Federal University of Technology Akure

    Dr Olatunji Oladimeji Ojo

  14. Modeling and optimization of friction stir stitching of AISI 201 stainless steel via Box-Behnken design methodology

    Article • Production Engineering Archives, May 2022, Stowarzyszenie Menedzerow Jakosci i Produkcji

    Dr Olatunji Oladimeji Ojo

  15. Influence of shoulder diameter on interfacial microstructure and mechanical behavior in dieless friction stir riveting of CP-Copper to 321 stainless steel

    Article • Vacuum, March 2022, Elsevier

    Dr Olatunji Oladimeji Ojo

  16. Friction spot extrusion brazing of copper to AISI 304 stainless steel with Zn interlayer: effect of shoulder surface modification

    Article • Archives of Civil and Mechanical Engineering, February 2022, Springer Science + Business Media

    Dr Olatunji Oladimeji Ojo, Prof., Drs., M.IT., Ph.D. Mahyuddin K. M. Nasution

  17. The influence of the backing plate materials on microstructure and mechanical properties of friction spot extrusion brazing of AA2024-T3 aluminum alloy and Brass sheets

    Article • Journal of Manufacturing Processes, February 2022, Elsevier

    Prof., Drs., M.IT., Ph.D. Mahyuddin K. M. Nasution, Dr Olatunji Oladimeji Ojo

  18. Positional variation of AA5083-H112 and AA6061-T6 alloys: Modified friction stir clinching

    Article • Vacuum, February 2022, Elsevier

    Dr Olatunji Oladimeji Ojo

  19. Weldability of interlocked-end friction stir welding of aluminum alloy: single and double-sided welding

    Article • Research on Engineering Structures and Materials, January 2022, MIM Research Group

    Dr Olatunji Oladimeji Ojo

  20. Diffusion brazing of IN738 to SiC ceramic with Ag-Cu-Ti powder: Effect of bonding time on metallurgical and mechanical properties

    Article • Results in Physics, December 2021, Elsevier

    Prof., Drs., M.IT., Ph.D. Mahyuddin K. M. Nasution, Dr Olatunji Oladimeji Ojo

  21. Improvement of mechanical and wear behavior by the development of a new tool for the friction stir processing of Mg/B4C composite

    Article • Surface and Coatings Technology, November 2021, Elsevier

    Dr Olatunji Oladimeji Ojo

  22. Dissimilar welding of AA5083 to AZ31 Mg alloys using modified friction stir clinching brazing

    Article • Materials Letters, October 2021, Elsevier

    Dr Olatunji Oladimeji Ojo

  23. A comparative study on weld characteristics of AA5083-H112 to AA6061-T6 sheets produced by MFSC and FSSW processes

    Article • Vacuum, August 2021, Elsevier

    Dr Olatunji Oladimeji Ojo

  24. Diffusion brazing of 321 stainless steel to IN738 using 54Ag-40Cu-5.0Zn-1.0Ni powder-mixture interlayer

    Article • Materials Letters, August 2021, Elsevier

    Dr Olatunji Oladimeji Ojo

  25. Investigation of modified friction stir clinching-brazing process of AA2024 Al/AZ31 Mg: metallurgical and mechanical properties

    Article • Archives of Civil and Mechanical Engineering, July 2021, Springer Science + Business Media

    Prof., Drs., M.IT., Ph.D. Mahyuddin K. M. Nasution, Dr Olatunji Oladimeji Ojo

  26. Modified Friction Stir Clinching of AA5754-O to AA6061-T6: The role of shoulder feature on the metallurgical and mechanical properties

    Article • Vacuum, May 2021, Elsevier

    Dr Olatunji Oladimeji Ojo

  27. Weldability and mechanical properties of AA5083-H112 aluminum alloy and pure copper dissimilar friction spot extrusion welding-brazing

    Article • Vacuum, May 2021, Elsevier

    Dr Olatunji Oladimeji Ojo

  28. Dieless Friction Stir Extrusion-Brazing (DFSE-B) of AA2024-T3 aluminum alloy to Copper with Zn interlayer

    Article • Results in Physics, May 2021, Elsevier

    Dr Olatunji Oladimeji Ojo, Dr. RAJKUMAR SIVANRAJU

  29. Erratum to “Modified friction stir clinching with protuberance-keyhole levelling: A process for production of welds with high strength” [J Manuf Processes 41 (2019) 177–187]

    Article • Journal of Manufacturing Processes, May 2021, Elsevier

    Dr Olatunji Oladimeji Ojo

  30. Evolution of solidification and microstructure in laser-clad IN625 superalloy powder on GTD-111 superalloy

    Article • Surface and Coatings Technology, April 2021, Elsevier

    Dr Olatunji Oladimeji Ojo

  31. Dissimilar friction stir spot welding of AA2024-T3/AA7075-T6 aluminum alloys under different welding parameters and media

    Article • Defence Technology, April 2021, Elsevier

    Dr Olatunji Oladimeji Ojo

  32. Effects of materials positioning and tool rotational speed on metallurgical and mechanical properties of dissimilar modified friction stir clinching of AA5754-O and AA2024-T3 sheets

    Article • Results in Physics, March 2021, Elsevier

    Dr Olatunji Oladimeji Ojo

  33. Modified friction stir clinching of AA6061-T6/AA5754-O joint: Effect of tool rotational speed and solution heat treatment on mechanical, microstructure, and fracture behaviors

    Article • Materials Characterization, March 2021, Elsevier

    Dr Olatunji Oladimeji Ojo

  34. Friction spot extrusion welding-brazing of copper to aluminum alloy

    Article • Materials Letters, February 2021, Elsevier

    Dr Olatunji Oladimeji Ojo

  35. Diffusion brazing of Inconel 617 and 321 stainless steel by using AMS 4772 Ag interlayer

    Article • Journal of Manufacturing Processes, January 2021, Elsevier

    Dr Olatunji Oladimeji Ojo

  36. Macro-/micro-mechanical interlocking modification on the performance of hybrid friction stir spot welded aluminum/acrylonitrile butadiene styrene joints

    Article • Research on Engineering Structures and Materials, January 2021, MIM Research Group

    Dr Olatunji Oladimeji Ojo

  37. Cyclic lateral behavior of friction stir spot welds of AA2219 aluminum alloy: impact of inherent flow defects

    Article • Kovove Materialy-Metallic Materials, January 2021, Central Library of the Slovak Academy of Sciences

    Dr Olatunji Oladimeji Ojo

  38. Fracture behaviors and optimizations of friction stir spot welded and friction stir clinched hybrid aluminum/acrylonitrile butadiene styrene joints

    Article • Research on Engineering Structures and Materials, January 2021, MIM Research Group

    Dr Olatunji Oladimeji Ojo

  39. Mechanical and microstructural aspects of the hybrid joint of PP-C30S and 2219 aluminum alloy

    Article • Results in Physics, December 2020, Elsevier

    Dr Olatunji Oladimeji Ojo

  40. The role of stirring time on the metallurgical and mechanical properties during modified friction stir clinching of AA6061-T6 and AA7075-T6 sheets

    Article • Results in Physics, December 2020, Elsevier

    Dr Olatunji Oladimeji Ojo

  41. Microscopic appraisal and mechanical behavior of hybrid Cu/Al joints fabricated via friction stir spot welding-brazing and modified friction stir clinching-brazing

    Article • Journal of Materials Research and Technology, November 2020, Elsevier

    Dr Olatunji Oladimeji Ojo

  42. Defects and post-manufac- turing processes of additively manufactured steels: A Review (Part 2)

    Article • Materials Testing, August 2020, De Gruyter

    Dr Olatunji Oladimeji Ojo

  43. A Thank You to Our Reviewers

    Article • Metallography Microstructure and Analysis, August 2020, Springer Science + Business Media

    Dr Olatunji Oladimeji Ojo

  44. Enhancing the mechanical and tribological properties of Mg2Si-rich aluminum alloys by multi-pass friction stir processing

    Article • Materials Chemistry and Physics, August 2020, Elsevier

    Dr Olatunji Oladimeji Ojo

  45. Effect of shoulder features during friction spot extrusion welding of 2024-T3 to 6061-T6 aluminium alloys

    Article • Archives of Civil and Mechanical Engineering, July 2020, Springer Science + Business Media

    Dr Olatunji Oladimeji Ojo

  46. Modified friction stir clinching of 2024-T3 to 6061-T6 aluminium alloy: Effect of dwell time and precipitation-hardening heat treatment

    Article • Materials Science and Engineering A, July 2020, Elsevier

    Dr Olatunji Oladimeji Ojo

  47. Development and characterization of dissimilar joint between AA2024-T3 and AA6061-T6 by modified friction stir clinching process

    Article • Vacuum, June 2020, Elsevier

    Dr Olatunji Oladimeji Ojo

  48. Role of Mg2Si particles on mechanical, wear, and corrosion behaviors of friction stir welding of AA6061-T6 and Al-Mg2Si composite

    Article • Journal of Composite Materials, May 2020, SAGE Publications

    Dr Olatunji Oladimeji Ojo

  49. Microstructure, Mechanical and Corrosion Behavior of Additively Manufactured Steel: A Review (Part 1)

    Article • Materials Testing, May 2020, De Gruyter

    Dr Olatunji Oladimeji Ojo

  50. Dissimilar modified friction stir clinching of AA2024-AA6061 aluminum alloys: Effects of materials positioning

    Article • Journal of Materials Research and Technology, May 2020, Elsevier

    Dr Olatunji Oladimeji Ojo

  51. Modified friction stir clinching of dissimilar AA2024-T3 to AA7075-T6: Effect of tool rotational speed and penetration depth

    Article • Journal of Manufacturing Processes, November 2019, Elsevier

    Dr Olatunji Oladimeji Ojo

  52. Multi-Objective Optimization of Friction Stir Spot Welds of Aluminum Alloy Using Entropy Measurement

    Article • International Journal of Engineering Research in Africa, November 2019, Trans Tech Publications

    Dr Olatunji Oladimeji Ojo

  53. Pre-threaded hole friction stir spot welding of AA2219/PP-C30S sheets

    Article • Journal of Materials Processing Technology, November 2019, Elsevier

    Dr Olatunji Oladimeji Ojo

  54. Friction stir welding of pure magnesium and polypropylene in a lap-joint configuration: Microstructure and mechanical properties

    Article • International Journal of Minerals Metallurgy and Materials, June 2019, Springer Science + Business Media

    Dr Olatunji Oladimeji Ojo

  55. Modified friction stir clinching with protuberance-keyhole levelling: A process for production of welds with high strength

    Article • Journal of Manufacturing Processes, May 2019, Elsevier

    Dr Olatunji Oladimeji Ojo

  56. Effect of bonding pressure on microstructure and mechanical properties of aluminium/copper diffusion-bonded joint

    Article • Sadhana, April 2019, Springer Science + Business Media

    Dr Olatunji Oladimeji Ojo

  57. Effect of Si on the structure and mechanical properties of Al-10%Mg-0.1%Ti alloy

    Article • Materials Research Express, April 2019, Institute of Physics Publishing

    Dr Olatunji Oladimeji Ojo

  58. Preparation and characterization of in-situ Al-AlXNiY composites via reactive infiltration

    Article • Journal of Alloys and Compounds, April 2019, Elsevier

    Dr Olatunji Oladimeji Ojo

  59. Microstructure and mechanical properties of autobody steel joined by friction stir spot welding

    Article • Sadhana, March 2019, Springer Science + Business Media

    Dr Olatunji Oladimeji Ojo

  60. Influence of multi-pass FSP on the microstructure, mechanical properties and tribological characterization of Al/B4C composite fabricated by accumulative roll bonding (ARB)

    Article • Surface and Coatings Technology, March 2019, Elsevier

    Dr Olatunji Oladimeji Ojo

  61. Development of SMEs Coping Model for Operations Advancement in Manufacturing Technology

    Article • January 2019, Elsevier

    Dr Peter Kayode Farayibi, Dr Olatunji Oladimeji Ojo

  62. Metallurgical and mechanical properties of underwater friction stir welds of Al7075 aluminum alloy

    Article • Journal of Materials Processing Technology, December 2018, Elsevier

    Dr Olatunji Oladimeji Ojo

  63. Effect of residual Alclad on friction stir spot welds of AA2219 alloys

    Article • Materials Testing, September 2018, De Gruyter

    Dr Olatunji Oladimeji Ojo

  64. Laboratory Study of a Lignocellulosic Biomass as an Alternative Base Material for Brake Pads

    Article • Current Journal of Applied Science and Technology, September 2018, Sciencedomain International

    Dr Olatunji Oladimeji Ojo

  65. Effect of Mn and Cr on structure and mechanical properties of Al-10%Mg-0.1%Ti alloy

    Article • Vacuum, September 2018, Elsevier

    Dr Olatunji Oladimeji Ojo

  66. Hybrid multi-response optimization of friction stir spot welds: failure load, effective bonded size and flash volume as responses

    Article • Sadhana, June 2018, Springer Science + Business Media

    Dr Olatunji Oladimeji Ojo

  67. Mechanical Properties and Wear Behavior of AA5182/WC Nanocomposite Fabricated by Friction Stir Welding at Different Tool Traverse Speeds

    Article • Journal of Materials Engineering and Performance, March 2018, Springer Science + Business Media

    Dr Olatunji Oladimeji Ojo

  68. Orbital friction stir lap welding of AA5456-H321/AA5456-O aluminum alloys under varied parameters

    Article • The International Journal of Advanced Manufacturing Technology, February 2018, Springer Science + Business Media

    Dr Olatunji Oladimeji Ojo

  69. Loop travel-path of fibre laser welded Alclad AA2219-O alloy

    Article • Journal of Materials Processing Technology, January 2018, Elsevier

    Dr Olatunji Oladimeji Ojo

  70. WITHDRAWN: Design of a Control System for an Automated Roselle Tea Process Plant

    Article • IFAC-PapersOnLine, December 2017, Elsevier

    Dr Olatunji Oladimeji Ojo

  71. Development of Ecofriendly Automobile Brake Pad Using Different Grade Sizes of Palm Kernel Shell Powder

    Article • Current Journal of Applied Science and Technology, August 2017, Sciencedomain International

    Dr Olatunji Oladimeji Ojo

  72. Understanding the role of welding parameters and tool profile on the morphology and properties of expelled flash of spot welds

    Article • Materials & Design, October 2016, Elsevier

    Dr Olatunji Oladimeji Ojo

  73. Properties, weldability and corrosion behavior of supermartensitic stainless steels for on- and offshore applications

    Article • Materials Testing, May 2016, De Gruyter

    Dr Olatunji Oladimeji Ojo

  74. Trend and innovations in laser beam welding of wrought aluminum alloys

    Article • Welding in the World, March 2016, Springer Science + Business Media

    Dr Olatunji Oladimeji Ojo

  75. Friction stir spot welding of aluminum alloys: A recent review

    Article • Materials Testing, July 2015, De Gruyter

    Dr Olatunji Oladimeji Ojo