All Stories

  1. An automated AI-powered IoT algorithm with data processing and noise elimination for plant monitoring and actuating

    Article • PeerJ Computer Science, November 2024, PeerJ

    Dr Muthuramalingam Thangaraj

  2. Multi-criteria decision making for better quality indicators in µ-EDM using TiN-coated WC electrode

    Article • Materials and Manufacturing Processes, August 2024, Taylor & Francis

    Dr Muthuramalingam Thangaraj

  3. Optimizing the Surface Parameters of Titanium (Ti-6Al-4V) Alloy Specimens Using WEDM Process Based on Taguchi-DEAR Algorithm

    Article • Advances in Science and Technology – Research Journal, August 2024, Wydawnictwo Naukowe Gabriel Borowski (WNGB)

    Dr Muthuramalingam Thangaraj

  4. Electrochemical Process Investigation of Synthesizing Magnesium Oxide from Bittern Solution for Solid Oxide Fuel Cells Sealant

    Article • Advances in Science and Technology – Research Journal, August 2024, Wydawnictwo Naukowe Gabriel Borowski (WNGB)

    Dr Muthuramalingam Thangaraj

  5. Influence of Cryogenic Coated Copper Tool Electrode in Electrochemical Micro Machining process of Stainless Steel 316

    Article • Eksploatacja i Niezawodnosc - Maintenance and Reliability, May 2024, Polskie Naukowo-Techniczne Towarzystwo Eksploatacyjne

    Dr Muthuramalingam Thangaraj

  6. Evaluation of the Feasibility of the Prediction of the Surface Morphologiesof AWJ-Milled Pockets by Statistical Methods Based on Multiple Roughness Indicators

    Article • Surfaces, May 2024, MDPI AG

    Dr Muthuramalingam Thangaraj

  7. Prediction and optimization kerf width in laser beam machining of titanium alloy using genetic algorithm tuned adaptive neuro-fuzzy inference system

    Article • The International Journal of Advanced Manufacturing Technology, May 2024, Springer Science + Business Media

    Dr Muthuramalingam Thangaraj

  8. Advanced Machining Technology for Modern Engineering Materials

    Article • Materials, April 2024, MDPI AG

    Dr Muthuramalingam Thangaraj

  9. Implementation of LQR based SOD control in diode laser beam machining on leather specimens

    Article • Optics & Laser Technology, March 2024, Elsevier

    Dr Muthuramalingam Thangaraj

  10. Implementation and performance analysis of combined SOD and PWM control in diode based laser beam machining process on leather specimen

    Article • Optics & Laser Technology, February 2024, Elsevier

    Dr Muthuramalingam Thangaraj

  11. Development of AFPID Based Stanley Controller to Control the Steering Wheel Angle of Vehicle on Tire Blowout

    Article • January 2024, Springer Science + Business Media

    Dr Muthuramalingam Thangaraj

  12. Unknown Environment Measurement Mapping by Unmanned Aerial Vehicle Using Kalman Filter-Based Low-Cost Estimated Parallel 8-Beam LIDAR

    Article • Computers Materials & Continua, January 2024, Computers, Materials and Continua (Tech Science Press)

    Dr Muthuramalingam Thangaraj

  13. Enhancing the machining productivity in PMEDM for titanium alloy with low-frequency vibrations associated with the workpiece

    Article • Journal of the Mechanical Behavior of Materials, January 2024, De Gruyter

    Dr Muthuramalingam Thangaraj

  14. Enhancing the Performance Measures of Electrical Discharge Machining Using Additive Manufactured Copper Tool Electrode on Drilling Titanium Alloy Specimens

    Article • October 2023, ASME International

    Dr Muthuramalingam Thangaraj

  15. Performance Evaluation and MOORA Based Optimization of Pulse Width Control on Leather Specimens in Diode Laser Beam Cutting Process

    Article • Processes, October 2023, MDPI AG

    Dr Muthuramalingam Thangaraj

  16. The tyre blow-out vehicle lateral pulling control using an active suspension system with comfort-lateral trajectory based control scheme.

    Article • Proceedings of the Institution of Mechanical Engineers Part D Journal of Automobile Engineering, September 2023, SAGE Publications

    Dr Muthuramalingam Thangaraj

  17. Predicting depth of cut in vibration-assisted EDM cutting on titanium alloy using adaptive neuro fuzzy inference system

    Article • Measurement, September 2023, Elsevier

    Dr Muthuramalingam Thangaraj

  18. Standalone and Interconnected Analysis of an Independent Accumulator Pressure Compressibility Hydro-Pneumatic Suspension for the Four-Axle Heavy Truck

    Article • Actuators, August 2023, MDPI AG

    Dr Muthuramalingam Thangaraj

  19. Experimental investigation of active suspension force control of electric motor driven actuator with estimation and tracking control strategy

    Article • Materials Today Proceedings, August 2023, Elsevier

    Dr Muthuramalingam Thangaraj

  20. Influence of carbon coated WC electrode on drilling measures of Ti–6Al–4V alloy in µ - EDM process

    Article • Sadhana, June 2023, Springer Science + Business Media

    Dr Muthuramalingam Thangaraj

  21. Recent trends on electro chemical machining process of metallic materials: a review

    Article • Archives of Civil and Mechanical Engineering, May 2023, Springer Science + Business Media

    Dr Muthuramalingam Thangaraj

  22. Influence of Silver-Coated Tool Electrode on Electrochemical Micromachining of Incoloy 825

    Article • Coatings, May 2023, MDPI AG

    Dr Muthuramalingam Thangaraj

  23. Design, Fabrication, and Optimization of a Printed Ag Nanoparticle-Based Flexible Capacitive Sensor for Automotive IVI Bezel Display Applications

    Article • Sensors, April 2023, MDPI AG

    Dr Muthuramalingam Thangaraj

  24. Theoretical and experimental analysis of plasma radius expansion model in EDM: a comprehensive study

    Article • The International Journal of Advanced Manufacturing Technology, March 2023, Springer Science + Business Media

    Professor Angelos P. Markopoulos, Dr Muthuramalingam Thangaraj

  25. Effects of lubricants and billet geometry on the extrusion of AA6063/5% SiCp composites

    Article • Proceedings of the Institution of Mechanical Engineers Part E Journal of Process Mechanical Engineering, March 2023, SAGE Publications

    Dr Muthuramalingam Thangaraj

  26. Performance Evaluation of Input Power of Diode Laser on Machined Leather Specimen in Laser Beam Cutting Process

    Article • Materials, March 2023, MDPI AG

    Dr Muthuramalingam Thangaraj

  27. Experimental investigation of PWM laser standoff distance control for power diode based LBM

    Article • Optics & Laser Technology, February 2023, Elsevier

    Dr Muthuramalingam Thangaraj

  28. A review of flexible printed sensors for automotive infotainment systems

    Article • Archives of Civil and Mechanical Engineering, January 2023, Springer Science + Business Media

    Dr Muthuramalingam Thangaraj

  29. Design of Real-Time Extremum-Seeking Controller-Based Modelling for Optimizing MRR in Low Power EDM

    Article • Materials, January 2023, MDPI AG

    Dr Muthuramalingam Thangaraj

  30. A review on artificial intelligence based control techniques on controlling BLDC motor measures

    Article • January 2023, American Institute of Physics

    Dr Muthuramalingam Thangaraj

  31. Design, development, and analysis of wireless controlled serial manipulator for laboratory environment

    Article • January 2023, American Institute of Physics

    Dr Muthuramalingam Thangaraj

  32. Influence of graphene coating in electrical discharge machining with an aluminum electrode

    Article • Journal of the Mechanical Behavior of Materials, January 2023, De Gruyter

    Dr Muthuramalingam Thangaraj

  33. Analysis of Carbon Formation on Machined Leather Specimen Using FTIR Technique in Laser Diode Assisted Cutting Process

    Article • Materials, December 2022, MDPI AG

    Dr Muthuramalingam Thangaraj

  34. Determination of Best Input Factors for PMEDM 90CrSi Tool Steel Using MABAC Method

    Article • December 2022, Springer Science + Business Media

    Dr Muthuramalingam Thangaraj

  35. Effects of machining parameters on enhancing Alpha-Beta Titanium alloy using Taguchi-grey relational analysis for aerospace applications

    Article • Proceedings of the Institution of Mechanical Engineers Part E Journal of Process Mechanical Engineering, November 2022, SAGE Publications

    Dr Muthuramalingam Thangaraj

  36. Enhancing the Performance Measures of Abrasive Water Jet Machining on Drilling Acrylic Glass Material

    Article • October 2022, ASME International

    Dr Muthuramalingam Thangaraj

  37. Optimization of Wire EDM Process Parameters on Cutting Inconel 718 Alloy with Zinc-Diffused Coating Brass Wire Electrode Using Taguchi-DEAR Technique

    Article • Coatings, October 2022, MDPI AG

    Dr Muthuramalingam Thangaraj, Professor Angelos P. Markopoulos

  38. Investigation of AA6061-T6's mechanical and microstructural properties by modification on the tool path in friction stir welding

    Article • Proceedings of the Institution of Mechanical Engineers Part E Journal of Process Mechanical Engineering, September 2022, SAGE Publications

    Dr Muthuramalingam Thangaraj

  39. Multi-objects optimization in µ-EDM using AlCrNi-coated tungsten carbide electrode for Ti-6AL-4 V

    Article • The International Journal of Advanced Manufacturing Technology, September 2022, Springer Science + Business Media

    Dr Muthuramalingam Thangaraj

  40. Effect of Age-Hardening Temperature on Mechanical and Wear Behavior of Furnace-Cooled Al7075-Tungsten Carbide Composite

    Article • Materials, August 2022, MDPI AG

    Dr Muthuramalingam Thangaraj, Prof Parammasivam K M

  41. Influences of tool electrodes on machinability of titanium α- β alloy with ISO energy pulse generator in EDM process

    Article • Alexandria Engineering Journal, August 2022, Elsevier

    Dr Muthuramalingam Thangaraj

  42. Multiobjective Optimization of Heat-Treated Copper Tool Electrode on EMM Process Using Artificial Bee Colony (ABC) Algorithm

    Article • Materials, July 2022, MDPI AG

    Dr Muthuramalingam Thangaraj

  43. Evaluation of Post Thermo Formed Screen Printed Silver Electrode Capacitive Sensor

    Article • July 2022, Institute of Electrical & Electronics Engineers (IEEE)

    Dr Muthuramalingam Thangaraj

  44. Experimental and theoretical investigation of extrusion load for AA6063/SiC extruded composite billet

    Article • Proceedings of the Institution of Mechanical Engineers Part E Journal of Process Mechanical Engineering, July 2022, SAGE Publications

    Dr Muthuramalingam Thangaraj

  45. Multi-objective optimization of micro EDM using TOPSIS method with Tungsten carbide electrode

    Article • Sadhana, July 2022, Springer Science + Business Media

    Dr Muthuramalingam Thangaraj

  46. Influence of heat-treated Cu–Be electrode on machining accuracy in ECMM with Monel 400 alloy

    Article • Archives of Civil and Mechanical Engineering, July 2022, Springer Science + Business Media

    Dr Muthuramalingam Thangaraj

  47. Recent progresses in wood-plastic composites: Pre-processing treatments, manufacturing techniques, recyclability and eco-friendly assessment

    Article • Cleaner Engineering and Technology, June 2022, Elsevier

    Dr Muthuramalingam Thangaraj

  48. Multi-objects Optimization in Μ - Edm Using Alcrni Coated Tungsten Carbide Electrode for Ti-6al-4v

    Article • May 2022, Research Square

    Dr Muthuramalingam Thangaraj

  49. Fabrication and Performance Analysis of 3D Inkjet Flexible Printed Touch Sensor Based on AgNP Electrode for Infotainment Display

    Article • Coatings, March 2022, MDPI AG

    Dr Muthuramalingam Thangaraj

  50. Enhancing surface morphology of machined SKD61 die steel in EDM process using DEAR approach based multi criteria decision making

    Article • International Journal on Interactive Design and Manufacturing (IJIDeM), March 2022, Springer Science + Business Media

    Dr Muthuramalingam Thangaraj

  51. Investigation and TGRA based optimization of laser beam drilling process during machining of Nickel Inconel 718 alloy

    Article • Journal of Materials Research and Technology, March 2022, Elsevier

    Dr Muthuramalingam Thangaraj

  52. Investigation of SOD control on leather carbonization in diode laser cutting

    Article • Materials and Manufacturing Processes, February 2022, Taylor & Francis

    Dr Muthuramalingam Thangaraj

  53. Low-cost bilayered structure for improving the performance of solar stills: Performance/cost analysis and water yield prediction using machine learning

    Article • Sustainable Energy Technologies and Assessments, February 2022, Elsevier

    Dr Muthuramalingam Thangaraj

  54. Hydraulic control valve integrated novel semi active roll resistant interconnected suspension with vertical and roll coordinated control scheme

    Article • Proceedings of the Institution of Mechanical Engineers Part D Journal of Automobile Engineering, January 2022, SAGE Publications

    Dr Muthuramalingam Thangaraj

  55. Influence of Adaptive Gap Control Mechanism and Tool Electrodes on Machining Titanium (Ti-6Al-4V) Alloy in EDM Process

    Article • Materials, January 2022, MDPI AG

    Dr Muthuramalingam Thangaraj

  56. Assessment of Vehicle Handling Performance of Drivers using Machine Learning Algorithms

    Article • IEEE Access, January 2022, Institute of Electrical & Electronics Engineers (IEEE)

    Dr Muthuramalingam Thangaraj

  57. Assessing the Effects of Uncoated and Coated Electrode on Response Variables in Electrical Discharge Machining for Ti-6Al-4V Titanium Alloy

    Article • Tribology in Industry, December 2021, Faculty of Engineering, University of Kragujevac

    Dr Muthuramalingam Thangaraj

  58. Fabrication and Performance Evolution of AgNP Interdigitated Electrode Touch Sensor for Automotive Infotainment

    Article • Sensors, November 2021, MDPI AG

    Dr Muthuramalingam Thangaraj

  59. Effect of ultrasonic low - frequency vibration and its direction on machinability in WEDM process

    Article • Materials and Manufacturing Processes, November 2021, Taylor & Francis

    Dr Muthuramalingam Thangaraj

  60. Measurement of carbonization region on leather cutting in CO2 and diode laser-based laser beam process

    Article • Proceedings of the Institution of Mechanical Engineers Part E Journal of Process Mechanical Engineering, November 2021, SAGE Publications

    Dr Muthuramalingam Thangaraj

  61. Fine-tuned artificial intelligence model using pigeon optimizer for prediction of residual stresses during turning of Inconel 718

    Article • Journal of Materials Research and Technology, November 2021, Elsevier

    Dr Muthuramalingam Thangaraj

  62. Optimization of Abrasive Water Jet Machining of SiC Reinforced Aluminum Alloy Based Metal Matrix Composites Using Taguchi–DEAR Technique

    Article • Materials, October 2021, MDPI AG

    Dr Muthuramalingam Thangaraj

  63. A comprehensive review on residual stresses in turning

    Article • Advances in Manufacturing, September 2021, Springer Science + Business Media

    Dr Muthuramalingam Thangaraj

  64. Impact of the novel square wave tool path pattern on AA6061-T6 friction stir welding

    Article • Materials and Manufacturing Processes, September 2021, Taylor & Francis

    Dr Muthuramalingam Thangaraj

  65. Reconstruction of the heat transfer coefficients and heat fluxes in heat conduction problems

    Article • Mathematics and Computers in Simulation, September 2021, Elsevier

    Dr Muthuramalingam Thangaraj

  66. Minimization of fume emissions in laser cutting of polyvinyl chloride sheets using genetic algorithm

    Article • International Journal of Environmental Science and Technology, August 2021, Springer Science + Business Media

    Dr Muthuramalingam Thangaraj

  67. A new optimized predictive model based on political optimizer for eco-friendly MQL-turning of AISI 4340 alloy with nano-lubricants

    Article • Journal of Manufacturing Processes, July 2021, Elsevier

    Dr Muthuramalingam Thangaraj

  68. Development of Laser Beam Machining using Power Diode Laser for leather cutting application

    Article • Journal of Physics Conference Series, July 2021, Institute of Physics Publishing

    Dr Muthuramalingam Thangaraj

  69. In-depth scrutinization of In- Mold Electronics for Automotive applications

    Article • Journal of Physics Conference Series, July 2021, Institute of Physics Publishing

    Dr Muthuramalingam Thangaraj

  70. Design, Fabrication, and Crack Analysis of Silver Track Printed Flexible Sensor for Automobile Infotainment Application

    Article • IEEE Sensors Journal, June 2021, Institute of Electrical & Electronics Engineers (IEEE)

    Dr Muthuramalingam Thangaraj

  71. Comparative Body Condition and Haemato-biochemical Profile of Tellicherry Does during Pregnancy, Lactation and Dry Period

    Article • Indian Journal of Animal Research, June 2021, Agricultural Research Communication Center

    Dr Muthuramalingam Thangaraj

  72. Influence of Additive Manufactured Stainless Steel Tool Electrode on Machinability of Beta Titanium Alloy

    Article • Metals, May 2021, MDPI AG

    Dr Muthuramalingam Thangaraj

  73. Deep learning-based forecasting model for COVID-19 outbreak in Saudi Arabia

    Article • Process Safety and Environmental Protection, May 2021, Elsevier

    Dr Muthuramalingam Thangaraj

  74. Multi-object optimization of EDM by Taguchi-DEAR method using AlCrNi coated electrode

    Article • The International Journal of Advanced Manufacturing Technology, April 2021, Springer Science + Business Media

    Dr Muthuramalingam Thangaraj

  75. Modeling of the Transient Temperature Field during Laser Heating

    Article • Lasers in Manufacturing and Materials Processing, March 2021, Springer Science + Business Media

    Dr Muthuramalingam Thangaraj

  76. Application of laser power diode on leather cutting and optimization for better environmental quality measures

    Article • Archives of Civil and Mechanical Engineering, March 2021, Springer Science + Business Media

    Dr Muthuramalingam Thangaraj

  77. Performance Analysis of Electrochemical Micro Machining of Titanium (Ti-6Al-4V) Alloy under Different Electrolytes Concentrations

    Article • Metals, February 2021, MDPI AG

    Dr Muthuramalingam Thangaraj

  78. Surface quality measures analysis and optimization on machining titanium alloy using CO2 based laser beam drilling process

    Article • Journal of Manufacturing Processes, February 2021, Elsevier

    Dr Muthuramalingam Thangaraj

  79. Experimental study on leather machinability in power diode based laser beam machining

    Article • January 2021, American Institute of Physics

    Dr Muthuramalingam Thangaraj

  80. Experimental Investigation of Uncoated Electrode and PVD AlCrNi Coating on Surface Roughness in Electrical Discharge Machining of Ti-6Al-4V

    Article • International Journal of Engineering, January 2021, International Digital Organization for Scientific Information (IDOSI)

    Dr Muthuramalingam Thangaraj

  81. Influence of process parameters on dimensional accuracy of machined Titanium (Ti-6Al-4V) alloy in Laser Beam Machining Process

    Article • Optics & Laser Technology, December 2020, Elsevier

    Dr Muthuramalingam Thangaraj

  82. Adaptive Focal Length Laser Tuning Method for High Precision Cutting

    Article • November 2020, Institute of Electrical & Electronics Engineers (IEEE)

    Dr Muthuramalingam Thangaraj

  83. Genetic Algorithm Based Optimization of Cutting Parameters in CO2 Laser Beam Cutting of Cow Leather

    Article • November 2020, Springer Science + Business Media

    Dr Muthuramalingam Thangaraj

  84. Material Removal Rate in Electric Discharge Machining with Aluminum Tool Electrode for Ti-6Al-4V Titanium Alloy

    Article • November 2020, Springer Science + Business Media

    Dr Muthuramalingam Thangaraj

  85. Multi-response Optimization in PMSEDM Process Using Taguchi-Grey Method

    Article • November 2020, Springer Science + Business Media

    Dr Muthuramalingam Thangaraj

  86. Optimization of PMEDM Parameters for Improving MMR in Machining 90CrSi Steel - A Taguchi Approach

    Article • November 2020, Springer Science + Business Media

    Dr Muthuramalingam Thangaraj

  87. Taguchi-DEAR Based MCDM Approach on Machining Titanium Alloy in AWJM Process

    Article • November 2020, Springer Science + Business Media

    Dr Muthuramalingam Thangaraj

  88. Tool Wear Rate Analysis of Uncoated and AlCrNi Coated Aluminum Electrode in EDM for Ti-6Al-4 V Titanium Alloy

    Article • November 2020, Springer Science + Business Media

    Dr Muthuramalingam Thangaraj

  89. Acoustic and mechanical characterisation of polypropylene composites reinforced by natural fibres for automotive applications

    Article • Journal of Materials Research and Technology, November 2020, Elsevier

    Dr Muthuramalingam Thangaraj

  90. Experimental Investigation of White Layer Formation on Machining Silicon Steel in PMEDM Process

    Article • Silicon, October 2020, Springer Science + Business Media

    Dr Muthuramalingam Thangaraj

  91. Effect of Scandium in Al–Sc and Al–Sc–Zr Alloys Under Precipitation Strengthening Mechanism at 350 °C Aging

    Article • Metals and Materials International, August 2020, Springer Science + Business Media

    Dr Muthuramalingam Thangaraj

  92. Multi-criteria Decision-making of Vibration-aided Machining for High Silicon-carbon Tool Steelwith Taguchi–topsis Approach

    Article • Silicon, August 2020, Springer Science + Business Media

    Dr Muthuramalingam Thangaraj

  93. Multi Criteria Decision Making of Vibration Assisted EDM Process Parameters on Machining Silicon Steel Using Taguchi-DEAR Methodology

    Article • Silicon, July 2020, Springer Science + Business Media

    Dr Muthuramalingam Thangaraj

  94. Influence of micro size titanium powder-mixed dielectric medium on surface quality measures in EDM process

    Article • The International Journal of Advanced Manufacturing Technology, July 2020, Springer Science + Business Media

    Dr Muthuramalingam Thangaraj

  95. Optimizing Replaced Nozzle Diameter of Abrasive Blasting Systems Using Experiment Technique Design

    Article • Applied Sciences, June 2020, MDPI AG

    Dr Muthuramalingam Thangaraj

  96. A review on control strategies for compensation of hysteresis and creep on piezoelectric actuators based micro systems

    Article • Mechanical Systems and Signal Processing, June 2020, Elsevier

    Dr Muthuramalingam Thangaraj

  97. Application of TGRA-Based Optimisation for Machinability of High-Chromium Tool Steel in the EDM Process

    Article • Arabian Journal for Science and Engineering, March 2020, Springer Science + Business Media

    Dr Muthuramalingam Thangaraj

  98. Enhancing the Surface Quality of Micro Titanium Alloy Specimen in WEDM Process by Adopting TGRA-Based Optimization

    Article • Materials, March 2020, MDPI AG

    Dr Muthuramalingam Thangaraj

  99. A Study on Optimization of Manufacturing Time in External Cylindrical Grinding

    Article • December 2019, Springer Science + Business Media

    Dr Muthuramalingam Thangaraj

  100. Multi-response Optimization of WEDM Process Parameters of Inconel 718 Alloy Using TGRA Method

    Article • December 2019, Springer Science + Business Media

    Dr Muthuramalingam Thangaraj

  101. Multi-responses Optimization of Process Parameters in Die-Sinking EDM Process on SKD11 Steel Using PSI Based Taguchi Method

    Article • December 2019, Springer Science + Business Media

    Dr Muthuramalingam Thangaraj

  102. Optimization of Manufacturing Time in Surface Grinding

    Article • December 2019, Springer Science + Business Media

    Dr Muthuramalingam Thangaraj

  103. Taguchi Based Process Parameters Optimization in Vibration Assisted Die Sinking Electrical Discharge Machining

    Article • December 2019, Springer Science + Business Media

    Dr Muthuramalingam Thangaraj

  104. Experimental Investigation of White Layer Thickness on EDM Processed Silicon Steel Using ANFIS Approach

    Article • Silicon, November 2019, Springer Science + Business Media

    Dr Muthuramalingam Thangaraj

  105. Prediction Modeling of Surface Roughness Using Capacitive Sensing Technique in Machining Process

    Article • IEEE Sensors Journal, November 2019, Institute of Electrical & Electronics Engineers (IEEE)

    Dr Muthuramalingam Thangaraj

  106. Design Optimization of Pneumatically Actuated Three Jaw Gripper Using Genetic Algorithm

    Article • November 2019, Institute of Electrical & Electronics Engineers (IEEE)

    Dr Muthuramalingam Thangaraj

  107. Effect of B4C and MOS2 reinforcement on micro structure and wear properties of aluminum hybrid composite for automotive applications

    Article • Composites Part B Engineering, November 2019, Elsevier

    Dr Muthuramalingam Thangaraj

  108. Effect of diluted dielectric medium on spark energy in green EDM process using TGRA approach

    Article • Journal of Cleaner Production, November 2019, Elsevier

    Dr Muthuramalingam Thangaraj

  109. Flushing Pressure Automation for Efficient Machining in EDM Process

    Article • November 2019, Institute of Electrical & Electronics Engineers (IEEE)

    Dr Muthuramalingam Thangaraj

  110. Multi Response Optimization on Machining Titanium Alloy Using Taguchi-DEAR Analysis in Abrasive Water Jet Cutting

    Article • October 2019, SAE International

    Dr Muthuramalingam Thangaraj

  111. Multi-Criteria Decision Making Using Preferential Selection Index in Titanium based Die-Sinking PMEDM

    Article • Journal of the Korean Society for Precision Engineering, September 2019, Korean Society of Precision Engineering

    Prof. Duc-Toan Nguyen, Dr Muthuramalingam Thangaraj

  112. Machine ability on Leather using Co2 Laser and Power Diode Laser

    Article • International Journal of Engineering and Advanced Technology, September 2019, Blue Eyes Intelligence Engineering and Sciences Engineering and Sciences Publication - BEIESP

    Blue Eyes Intelligence Engineering and Sciences Blue Eyes Intelligence Engineering and Sciences Publication, Dr Muthuramalingam Thangaraj

  113. Influence of Process Parameters on Machinability of Inconel 718 by Electrochemical Micromachining Process using TOPSIS Technique

    Article • Arabian Journal for Science and Engineering, June 2019, Springer Science + Business Media

    Dr Muthuramalingam Thangaraj

  114. Influence of process factors on surface measures on electrical discharge machinined stainless steel using topsis

    Article • Materials Research Express, April 2019, Institute of Physics Publishing

    Dr Muthuramalingam Thangaraj

  115. Effects of Silicon Carbide and Tungsten Carbide in Aluminium Metal Matrix Composites

    Article • Silicon, January 2019, Springer Science + Business Media

    Dr Muthuramalingam Thangaraj

  116. Recent Trends in Micro and Nano Machining of Engineering Materials

    Article • September 2018, Springer Science + Business Media

    Dr Muthuramalingam Thangaraj

  117. A Study on Machinability of Leather Using CO2-Based Laser Beam Machining Process

    Article • September 2018, Springer Science + Business Media

    Dr Muthuramalingam Thangaraj

  118. Analysis of Machinability on WEDM Processed Titanium Alloy with Coated Electrodes

    Article • September 2018, Springer Science + Business Media

    Dr Muthuramalingam Thangaraj

  119. Influence of Nanoparticles-Suspended Electrolyte on Machinability of Stainless Steel 430 Using Electrochemical Micro-machining Process

    Article • September 2018, Springer Science + Business Media

    Dr Muthuramalingam Thangaraj

  120. Analysis of surface performance measures on WEDM processed titanium allow with coated electronics

    Article • Materials Research Express, September 2018, Institute of Physics Publishing

    Dr Muthuramalingam Thangaraj

  121. Dynamic Mechanical Analysis of Sub-micron Size Flyash Particles Filled Polyester Resin Composites

    Article • September 2018, Springer Science + Business Media

    Dr Muthuramalingam Thangaraj

  122. Synthesis and Characterization of Nano-Glass Particles Reinforced AZ91D Magnesium Alloy Composites

    Article • September 2018, Springer Science + Business Media

    Dr Muthuramalingam Thangaraj

  123. Measuring the Influence of Discharge Energy on white Layer Thickness in Electrical Discharge Machining Process

    Article • Measurement, September 2018, Elsevier

    Dr Muthuramalingam Thangaraj

  124. Effect of process parameters on mechanical properties of hollow glass microsphere reinforced magnesium alloy syntactic foams under vacuum die casting

    Article • Archives of Civil and Mechanical Engineering, September 2018, Springer Science + Business Media

    Dr Muthuramalingam Thangaraj

  125. Optimisation of multiple response characteristics on end milling of aluminium alloy using Taguchi-Grey relational approach

    Article • Measurement, August 2018, Elsevier

    Dr Muthuramalingam Thangaraj

  126. Multi Response Optimization of AWJM Process Parameters on Machining TiB2 Particles Reinforced Al7075 Composite Using Taguchi-DEAR Methodology

    Article • Silicon, June 2018, Springer Science + Business Media

    Dr Muthuramalingam Thangaraj

  127. Multi Criteria Decision Making of Abrasive Flow Oriented Process Parameters in Abrasive Water Jet Machining Using Taguchi–DEAR Methodology

    Article • Silicon, May 2018, Springer Science + Business Media

    Dr Muthuramalingam Thangaraj

  128. Performance evaluation of interconnected pneumatic cylinders positioning system

    Article • Sensors and Actuators A Physical, May 2018, Elsevier

    Dr Muthuramalingam Thangaraj

  129. Thermal and mechanical behaviour of sub micron sized fly ash reinforced polyester resin composite

    Article • Materials Research Express, March 2018, Institute of Physics Publishing

    Dr Muthuramalingam Thangaraj

  130. Performance Analysis of Pulse Generators on Residual Stress of Machined Silicon Steel Using the EDM Process

    Article • Silicon, March 2018, Springer Science + Business Media

    Dr Muthuramalingam Thangaraj

  131. Multi-Response Optimization on Mechanical Properties of Silica Fly Ash Filled Polyester Composites Using Taguchi-Grey Relational Analysis

    Article • Silicon, January 2018, Springer Science + Business Media

    Dr Muthuramalingam Thangaraj

  132. Sensor Integration-Based Approach for Automatic Fork Lift Trucks

    Article • IEEE Sensors Journal, January 2018, Institute of Electrical & Electronics Engineers (IEEE)

    Dr Muthuramalingam Thangaraj

  133. Tracking and Locking System for Shooter With Sensory Noise Cancellation

    Article • IEEE Sensors Journal, January 2018, Institute of Electrical & Electronics Engineers (IEEE)

    Dr Muthuramalingam Thangaraj

  134. Application of failure mode and effect analysis in manufacturing industry - an integrated approach with FAHP-fuzzy TOPSIS and FAHP-fuzzy VIKOR

    Article • International Journal of Productivity and Quality Management, January 2018, Inderscience Publishers

    Dr Muthuramalingam Thangaraj

  135. Influence of high protein level along with mineral mixture and baking soda supplementation on growth performance and carcass quality in Tellicherry kids

    Article • Indian Journal of Animal Research, December 2017, Agricultural Research Communication Center

    Dr Muthuramalingam Thangaraj

  136. Synthesis and characterization of hollow glass microspheres reinforced magnesium alloy matrix syntactic foam

    Article • Journal of Alloys and Compounds, September 2017, Elsevier

    Dr Muthuramalingam Thangaraj

  137. A review on recent research trends in servo pneumatic positioning systems

    Article • Precision Engineering, July 2017, Elsevier

    Dr Muthuramalingam Thangaraj

  138. Novel mononuclear Cu (II) terpyridine complexes: Impact of fused ring thiophene and thiazole head groups towards DNA/BSA interaction, cleavage and antiproliferative activity on HepG2 and triple negative CAL-51 cell line

    Article • European Journal of Medicinal Chemistry, July 2017, Elsevier

    Dr Muthuramalingam Thangaraj

  139. Performance analysis of process parameters on machining α–β titanium alloy in electrochemical micromachining process

    Article • Proceedings of the Institution of Mechanical Engineers Part B Journal of Engineering Manufacture, October 2016, SAGE Publications

    Dr Muthuramalingam Thangaraj

  140. Black cotton soil stabilisation

    Article • Journal of Central South University, October 2016, Springer Science + Business Media

    Dr Gobinath R, Dr Muthuramalingam Thangaraj

  141. Bio-Enzymatic Stabilization of a Soil Having Poor Engineering Properties

    Article • International Journal of Civil Engineering, July 2016, Springer Science + Business Media

    Dr Muthuramalingam Thangaraj

  142. Influence of Coated Tool Electrode on Drilling Inconel Alloy 718 in Electrochemical Micro Machining

    Article • Procedia CIRP, January 2016, Elsevier

    Dr Muthuramalingam Thangaraj

  143. Performance Analysis of Process Parameters on Machining Titanium (Ti-6Al-4V) Alloy Using Abrasive Water Jet Machining Process

    Article • Procedia CIRP, January 2016, Elsevier

    Dr Muthuramalingam Thangaraj

  144. Performance Analysis of Wire Electrodes on MachiningTi-6Al-4VAlloy using Electrical Discharge Machining Process

    Article • Machining Science and Technology, October 2015, Taylor & Francis

    Dr Muthuramalingam Thangaraj

  145. A Study on Influence of System Parameters on Servo Pneumatic System and Multi-Response Optimization Using Taguchi – Grey Methodology

    Article • Applied Mechanics and Materials, September 2015, Trans Tech Publications

    Dr Muthuramalingam Thangaraj

  146. Multi-Response Optimization of Wire-EDM Process Parameters of Titanium Alloy Using Taguchi Method and Grey Relational Analysis

    Article • Applied Mechanics and Materials, July 2015, Trans Tech Publications

    Dr Muthuramalingam Thangaraj

  147. Evaluation of Surface Finish of Electrical Discharge Machined AISI 304 Stainless Steel with Various Pulse Generators

    Article • Applied Mechanics and Materials, July 2015, Trans Tech Publications

    Dr Muthuramalingam Thangaraj

  148. Evaluation of Recast Layer Thickness of Electrical Discharge Machined AISI 202 Stainless Steel with Various Pulse Generators

    Article • Applied Mechanics and Materials, June 2015, Trans Tech Publications

    Dr Muthuramalingam Thangaraj

  149. Application of Taguchi-Grey Relational Methodology for Multiple Optimal Performance Measures in WEDM Process

    Article • Applied Mechanics and Materials, June 2015, Trans Tech Publications

    Dr Muthuramalingam Thangaraj

  150. Bioactive bile salt-capped silver nanoparticles activity against destructive plant pathogenic fungi through in vitro system

    Article • RSC Advances, January 2015, Royal Society of Chemistry

    Dr Muthuramalingam Thangaraj

  151. A review on influence of electrical process parameters in EDM process

    Article • Archives of Civil and Mechanical Engineering, January 2015, Elsevier

    Dr Muthuramalingam Thangaraj

  152. Application of Taguchi-grey multi responses optimization on process parameters in electro erosion

    Article • Measurement, December 2014, Elsevier

    Dr Muthuramalingam Thangaraj

  153. Effect of Tool Electrode Resolidification on Surface Hardness in Electrical Discharge Machining

    Article • Materials and Manufacturing Processes, October 2014, Taylor & Francis

    Dr Muthuramalingam Thangaraj

  154. Application of response surface methodology on finding influencing parameters in servo pneumatic system

    Article • Measurement, August 2014, Elsevier

    Dr Muthuramalingam Thangaraj

  155. Performance analysis of iso current pulse generator on machining characteristics in EDM process

    Article • Archives of Civil and Mechanical Engineering, May 2014, Elsevier

    Dr Muthuramalingam Thangaraj

  156. Monitoring and Fuzzy Control Approach for Efficient Electrical Discharge Machining Process

    Article • Materials and Manufacturing Processes, March 2014, Taylor & Francis

    Dr Muthuramalingam Thangaraj

  157. Optimization of Proportional Fuzzy Controller for Servo Pneumatic Positioning System Using Taguchi: Data Envelopment Analysis Based Ranking Methodology

    Article • Journal of Engineering & Technology, January 2014, Medknow

    Dr Muthuramalingam Thangaraj

  158. Experimental Investigation of Iso Energy Pulse Generator on Performance Measures in EDM

    Article • Materials and Manufacturing Processes, October 2013, Taylor & Francis

    Dr Muthuramalingam Thangaraj

  159. Influence of Discharge Current Pulse on Machinability in Electrical Discharge Machining

    Article • Materials and Manufacturing Processes, April 2013, Taylor & Francis

    Dr Muthuramalingam Thangaraj

  160. Influence of Tool Electrode Properties on Machinability in Spark Erosion Machining

    Article • Materials and Manufacturing Processes, January 2013, Taylor & Francis

    Dr Muthuramalingam Thangaraj

  161. Design and fabrication of control system-based ISO pulse generator for electrical discharge machining

    Article • International Journal of Mechatronics and Manufacturing Systems, January 2013, Inderscience Publishers

    Dr Muthuramalingam Thangaraj

  162. Multi-Response Optimization of Electrical Process Parameters on Machining Characteristics in Electrical Discharge Machining Using Taguchi-Data Envelopment Analysis-Based Ranking Methodology

    Article • Journal of Engineering & Technology, January 2013, Medknow

    Dr Muthuramalingam Thangaraj

  163. A study on improving machining characteristics of electrical discharge machining with modified transistor pulse generator

    Article • International Journal of Manufacturing Technology and Management, January 2013, Inderscience Publishers

    Dr Muthuramalingam Thangaraj

  164. Enhancing the Surface Quality by Iso Pulse Generator in EDM Process

    Article • Advanced Materials Research, December 2012, Trans Tech Publications

    Dr Muthuramalingam Thangaraj