All Stories

  1. Integrated interface system for tool path generation of STEP file

    Article • January 2019, American Institute of Physics

    Dr Saiful Bahri Mohamed, Mr Mohd Shahir Kasim

  2. Investigation of tangential force on ball nose rake face during high-speed milling of Inconel 718

    Article • Advances in Materials and Processing Technologies, March 2018, Taylor & Francis

    Mr Mohd Shahir Kasim, Professor JAHARAH A GHANI, Dr Raja Izamshah

  3. Performance evaluation of rotary mechanism characteristics by response surface methodology in cylindrical wire electrical discharge turning

    Article • Advances in Materials and Processing Technologies, December 2017, Taylor & Francis

    Mr Mohd Shahir Kasim

  4. Comparative study of tool wear in milling titanium alloy (Ti-6Al-4V) using PVD and CVD coated cutting tool

    Article • Industrial Lubrication and Tribology, May 2017, Emerald

    Mr Mohd Shahir Kasim

  5. Tool Wear Analysis on Five-Axis Flank Milling for Curved Shape Part – Full Flute and Ground Shank End Mill

    Article • MATEC Web of Conferences, January 2017, EDP Sciences

    Mr Mohd Shahir Kasim

  6. Effects of Drill Geometry and Penetration Angle on Temperature and Holes Surfaces for Cortical Bovine Bone: An in Vitro Study

    Article • Procedia Engineering, January 2017, Elsevier

    Mr Mohd Shahir Kasim

  7. Sub-surface Analysis When Finish Turning Inconel 718 High Speed Machining with Minimum Quantity Lubrication (MQL)

    Article • Asian Journal of Scientific Research, November 2016, Science Alert

    Mr Mohd Shahir Kasim

  8. Part weight verification between simulation and experiment of plastic part in injection moulding process

    Article • IOP Conference Series Materials Science and Engineering, November 2016, Institute of Physics Publishing

    Mr Mohd Shahir Kasim

  9. Advanced Manufacturing of an Aircraft Component (Fish-Head): A Technology Review on the Fabrication

    Article • International Journal on Advanced Science Engineering and Information Technology, October 2016, Insight Society

    Mr Mohd Shahir Kasim, Dr Saiful Bahri Mohamed

  10. Cost evaluation on performance of a PVD coated cutting tool during end-milling of Inconel 718 under MQL conditions

    Article • Transactions of the IMF, July 2016, Taylor & Francis

    Mr Mohd Shahir Kasim, Dr Saiful Bahri Mohamed

  11. Electroless Ni-Co-Cu-P Alloy Deposition in Alkaline Hypophosphite Based Bath

    Article • Key Engineering Materials, May 2016, Trans Tech Publications

    Dr MOHD ASYADI AZAM, Mr Mohd Shahir Kasim, Rose Farahiyan

  12. Response Surface Methodology Approach on Effect of Cutting Parameter on Tool Wear during End Milling of High Thermal Conductivity Steel -150 (HTCS-150)

    Article • IOP Conference Series Materials Science and Engineering, February 2016, Institute of Physics Publishing

    Mr Mohd Shahir Kasim

  13. Investigation of Cutting Edge Radius Effect in Macro-machining and Micro-machining

    Article • January 2016, Springer Science + Business Media

    Mr Mohd Shahir Kasim

  14. Wear mechanism of coated and uncoated carbide cutting tool in machining process

    Article • Journal of Materials Research, December 2015, Cambridge University Press

    Professor JAHARAH A GHANI, Mr Mohd Shahir Kasim

  15. Effect of cutting speed on the carbide cutting tool in milling Inconel 718 alloy

    Article • Journal of Materials Research, December 2015, Cambridge University Press

    Mr Mohd Shahir Kasim

  16. EFFECT OF CUTTING PARAMETERS ON CUTTING ZONE IN CRYOGENIC HIGH SPEED MILLING OF INCONEL 718 ALLOY

    Article • Jurnal Teknologi (Sciences & Engineering), December 2015, Penerbit UTM Press

    Mr Mohd Shahir Kasim

  17. PRODUCT AND TOOLING DESIGN OF SLANTED GLASS INJECTION MOULD FOR VISUALIZATION OF FLOW MOLTEN PLASTIC

    Article • Jurnal Teknologi (Sciences & Engineering), December 2015, Penerbit UTM Press

    Mr Mohd Shahir Kasim

  18. Heat-Assisted Machining for Material Removal Improvement

    Article • IOP Conference Series Materials Science and Engineering, September 2015, Institute of Physics Publishing

    Mr Mohd Shahir Kasim

  19. Composite Machining Optimisation

    Article • Applied Mechanics and Materials, September 2015, Trans Tech Publications

    Dr Saiful Bahri Mohamed, Mr Mohd Shahir Kasim

  20. Development of Three-Axis Mini Milling Machine for Small Scale Production

    Article • Applied Mechanics and Materials, May 2015, Trans Tech Publications

    Dr Raja Izamshah, Prof Dr Abu Abdullah, Mr Mohd Shahir Kasim

  21. Design and Development of Weaving Aid Tool for Rattan Handicraft

    Article • Applied Mechanics and Materials, May 2015, Trans Tech Publications

    Mr Mohd Shahir Kasim

  22. Optimization of Cutter Geometry Features to Minimise Cutting Force on Machining Polyetheretherketone (PEEK) Engineering Plastic

    Article • Applied Mechanics and Materials, May 2015, Trans Tech Publications

    Dr Raja Izamshah, Mr Mohd Shahir Kasim, Sivarao Subramonian

  23. Multi Objective Optimization of Cutting Parameters in Machining Cellulose Based Hybrid Composites

    Article • Applied Mechanics and Materials, May 2015, Trans Tech Publications

    Dr Raja Izamshah, Mr Mohd Shahir Kasim

  24. Analysis of Tool Performance during Ball-End Milling of Aluminium Alloy 6061-T6

    Article • Applied Mechanics and Materials, May 2015, Trans Tech Publications

    Mr Mohd Shahir Kasim, J SAEDON

  25. Cure Characteristics of Natural Rubber/EPDM Blends for the Effect of MAH Grafted EPM and Compounding Parameters via Response Surface Methodology

    Article • Applied Mechanics and Materials, May 2015, Trans Tech Publications

    Dr MOHD ASYADI AZAM, Mr Mohd Shahir Kasim, Rose Farahiyan

  26. Precision machining

    Article • Applied Mechanics and Materials, May 2015, Trans Tech Publications

    Dr Raja Izamshah, Mr Mohd Shahir Kasim

  27. Micro-drilling of silicon wafer by industrial CO2 laser

    Article • International Journal of Mechanical and Materials Engineering, February 2015, Springer Science + Business Media

    Mr Mohd Shahir Kasim

  28. 1305 Spreadsheet Application In Solving Engineering Problem : Development Of Shaft Alignment Program

    Article • The Proceedings of Design & Systems Conference, January 2015, Japan Society of Mechanical Engineers

    Mr Mohd Shahir Kasim

  29. 1304 Development of New Cutter Design for Machining Thin Wall Aerospace Component

    Article • The Proceedings of Design & Systems Conference, January 2015, Japan Society of Mechanical Engineers

    Mr Mohd Shahir Kasim

  30. 1306 Malay articulation disorder diagnostic tool design by using Hidden Markov Model

    Article • January 2015, Japan Society of Mechanical Engineers

    Mr Mohd Shahir Kasim

  31. 1303 Implementation of TMAC Workshop for Global Design Education

    Article • January 2015, Japan Society of Mechanical Engineers

    Mr Mohd Shahir Kasim

  32. 1301 TMAC Research and Education Units towards academic collaboration

    Article • January 2015, Japan Society of Mechanical Engineers

    Mr Mohd Shahir Kasim

  33. 1302 Preparation of TMAC Workshop for Global Design Education

    Article • January 2015, Japan Society of Mechanical Engineers

    Mr Mohd Shahir Kasim

  34. 103 Finite Element Simulation of Trimming CFRP Composite with Cross-Nick Cutter

    Article • January 2015, Japan Society of Mechanical Engineers

    Mr Mohd Shahir Kasim

  35. Finite Element Model of Trimming CFRP Aerospace Composites

    Article • Applied Mechanics and Materials, November 2014, Trans Tech Publications

    Dr MOHD ASYADI AZAM, Dr Raja Izamshah, Mr Mohd Shahir Kasim

  36. The Effect of Binder on Mechanical Properties of Kenaf Fibre/Polypropylene Composites Using Full Factorial Method

    Article • Applied Mechanics and Materials, November 2014, Trans Tech Publications

    Dr Raja Izamshah, Mr Mohd Shahir Kasim

  37. Determination on the Effect of Cutter Geometrical Feature for Machining Polyetheretherketone (PEEK) Using Taguchi Methods

    Article • Applied Mechanics and Materials, November 2014, Trans Tech Publications

    Dr Raja Izamshah, Mr Mohd Shahir Kasim

  38. Optimisation of Machining Parameters for Milling Polyetheretherketones (PEEK) Biomaterial

    Article • Applied Mechanics and Materials, November 2014, Trans Tech Publications

    Dr Raja Izamshah, Mr Mohd Shahir Kasim, Sivarao Subramonian

  39. Effect of Injection Moulding Machine Parameters on the Warpage by Applying Taguchi Method

    Article • Applied Mechanics and Materials, November 2014, Trans Tech Publications

    Dr Bukhari Manshoor, Dr Raja Izamshah, Mr Mohd Shahir Kasim

  40. Effects of Helix Angle on Cutting Performance for Machining Thin-Wall Aerospace Monolithic Component

    Article • Applied Mechanics and Materials, November 2014, Trans Tech Publications

    Dr Raja Izamshah, Mr Mohd Shahir Kasim

  41. Fatigue Life Analysis of High Performance Motorcycle Disc Brake

    Article • Applied Mechanics and Materials, November 2014, Trans Tech Publications

    Mr Mohd Shahir Kasim, Sivarao Subramonian

  42. Multi-Objective Optimization Using Box-Behken of Response Surface Methodology for High-Speed Machining of Inconel 718

    Article • Applied Mechanics and Materials, October 2014, Trans Tech Publications

    Mr Mohd Shahir Kasim, J SAEDON

  43. Surface Integrity of LM6 Aluminum Metal Matrix Composite when Machined with High Speed Steel and Uncoated Carbide Cutting Tools

    Article • JOURNAL OF MECHANICAL ENGINEERING AND SCIENCES, June 2014, Universiti Malaysia Pahang Publisher

    Mr Mohd Shahir Kasim

  44. Effects of Cutter Geometrical Features on Machining Polyetheretherketones (PEEK) Engineering Plastic

    Article • JOURNAL OF MECHANICAL ENGINEERING AND SCIENCES, June 2014, Universiti Malaysia Pahang Publisher

    Mr Mohd Shahir Kasim

  45. Optimization of Cutting Parameters of Multiple Performance Characteristics in End Milling of AlSi/AIN MMC – Taguchi Method and Grey Relational Analysis

    Article • Jurnal Teknologi (Sciences & Engineering), May 2014, Penerbit UTM Press

    Mr Mohd Shahir Kasim

  46. Investigation on Wear Behavior and Chip Formation During Up-Milling and Down-Milling Operations for Inconel 718

    Article • Jurnal Teknologi (Sciences & Engineering), March 2014, Penerbit UTM Press

    Mr Mohd Shahir Kasim

  47. Modeling and Influence of Machining Parameters on Titanium Aloy

    Article • Advanced Materials Research, March 2014, Trans Tech Publications

    Mr Mohd Shahir Kasim, J SAEDON

  48. Cutter Path Strategies for Shoulder Milling of Thin Deflecting Walls

    Article • Advanced Materials Research, February 2014, Trans Tech Publications

    Mr Mohd Shahir Kasim

  49. Modeling and Multi-Response Optimization on WEDM Ti6Al4V

    Article • Applied Mechanics and Materials, February 2014, Trans Tech Publications

    Mr Mohd Shahir Kasim, J SAEDON

  50. The Effect of Pressure on Warpage of Dumbbell Plastic Part in Injection Moulding Machine

    Article • Advanced Materials Research, February 2014, Trans Tech Publications

    Mr Mohd Shahir Kasim

  51. Multi-objective Optimization of Titanium Alloy through Orthogonal Array and Grey Relational Analysis in WEDM

    Article • Procedia Technology, January 2014, Elsevier

    Mr Mohd Shahir Kasim

  52. 2308 Effect Cutting Parameters on Surface Roughness during End Milling of AISI D2 Tool Steel

    Article • The Proceedings of Design & Systems Conference, January 2014, Japan Society of Mechanical Engineers

    Mr Mohd Shahir Kasim

  53. 2316 Design and optimization of runner and gating systems for permanent mould casting

    Article • The Proceedings of Design & Systems Conference, January 2014, Japan Society of Mechanical Engineers

    Mr Mohd Shahir Kasim

  54. 2410 Mould design analysis of casted natural fibre-metal matrix composites

    Article • January 2014, Japan Society of Mechanical Engineers

    Mr Mohd Shahir Kasim

  55. 2310 Improving Die Exchange Process in Textile Manufacturing Company with SMED

    Article • January 2014, Japan Society of Mechanical Engineers

    Mr Mohd Shahir Kasim

  56. 2314 Study on cutting parameter on kerf width using wire electrical discharge machining of Inconel 718

    Article • The Proceedings of Design & Systems Conference, January 2014, Japan Society of Mechanical Engineers

    Mr Mohd Shahir Kasim

  57. Evaluation of the Surface Integrity when Machining LM6 Aluminum Metal Matrix Composites Using Coated and Uncoated Carbide Cutting Tools

    Article • Applied Mechanics and Materials, December 2013, Trans Tech Publications

    Mr Mohd Shahir Kasim

  58. Cutting Performances of Coated PVD in High Speed End Milling of Aged Inconel 718

    Article • Materials Science Forum, November 2013, Trans Tech Publications

    Mr Mohd Shahir Kasim, J SAEDON

  59. Wear mechanism and notch wear location prediction model in ball nose end milling of Inconel 718

    Article • Wear, April 2013, Elsevier

    Mr Mohd Shahir Kasim

  60. Comparison between Up-milling and Down-milling Operations on Tool Wear in Milling Inconel 718

    Article • Procedia Engineering, January 2013, Elsevier

    Mr Mohd Shahir Kasim

  61. Effects of Machine Parameters on Surface Roughness Using Response Surface Method in Drilling Process

    Article • Procedia Engineering, January 2013, Elsevier

    Mr Mohd Shahir Kasim

  62. Study of Surface Roughness on Milling Unfilled-polyetheretherketones Engineering Plastics

    Article • Procedia Engineering, January 2013, Elsevier

    Mr Mohd Shahir Kasim

  63. Surface integrity of Inconel 718 when finish turning with PVD coated carbide tool under MQL

    Article • Procedia Engineering, January 2011, Elsevier

    Mr Mohd Shahir Kasim

  64. Surface Intergrity of Inconel 718 under MQL Condition

    Article • Advanced Materials Research, October 2010, Trans Tech Publications

    Mr Mohd Shahir Kasim

  65. The Effect of Minimal Quantity Lubrication (MQL) on the Surface Roughness of Titanium Alloy Ti-6Al-4V ELI in Turning Process

    Article • Advanced Materials Research, October 2010, Trans Tech Publications

    Mr Mohd Shahir Kasim

  66. Tool Wear of PVD Coated Carbide Tool when Finish Turning Inconel 718 under High Speed Machining

    Article • Advanced Materials Research, August 2010, Trans Tech Publications

    Mr Mohd Shahir Kasim

  67. Optimization of Gate, Runner and Sprue in Two-Plate Family Plastic Injection Mould

    Article • January 2010, American Institute of Physics

    Mr Mohd Shahir Kasim