All Stories

  1. Equations of fluid flow in capillaries under pressure gradient: A discussion on applicability and interrelations
  2. The influence of anion-exchange membrane nanostructure onto ion transport: Adjusting membrane performance through fabrication conditions
  3. Polystyrene Sulfonate Particles as Building Blocks for Nanofiltration Membranes
  4. Progress in alumina ceramic membranes for water purification: Status and prospects
  5. In situ reactive coating of porous filtration membranes with functional polymer layers to integrate boron adsorber property
  6. Thermo-Responsive Hydrophilic Support for Polyamide Thin-Film Composite Membranes with Competitive Nanofiltration Performance
  7. Preparation of N-doped carbon materials from cellulose:chitosan blends and their potential application in electrocatalytic oxygen reduction
  8. Tensile strength deterioration of PVC coated PET woven fabrics under single and multiplied artificial weathering impacts and cyclic loading
  9. Microfiltration of polymeric microgels as soft model colloids through sterile filter membranes
  10. Mixed-Matrix Membrane Adsorbers for the Simultaneous Removal of Different Pharmaceutical Micropollutants from Water
  11. Impact of Climate Change on Drinking Water Safety
  12. Development of Antifouling Polysulfone Membranes by Synergistic Modification with Two Different Additives in Casting Solution and Coagulation Bath: Synperonic F108 and Polyacrylic Acid
  13. Improvement of proton conductivity of magnetically aligned phosphotungstic acid-decorated cobalt oxide embedded Nafion membrane
  14. Enhancing the phase change material properties by an energy-efficient one-step preparation method using organogelator–polyolefin composites
  15. Polyelectrolyte Functionalisation of Track Etched Membranes: Towards Charge-Tuneable Adsorber Materials
  16. Polyzwitterionic hydrogel coating for reverse osmosis membranes by concentration polarization-enhanced in situ “click” reaction that is applicable in modules
  17. Poly(ether sulfone) hollow fiber membranes prepared via nonsolvent‐induced phase separation using the green solvent Agnique® AMD 3 L
  18. Cotton as Precursor for the Preparation of Porous Cellulose Adsorbers
  19. Three-Dimensional Analysis of the Natural-Organic-Matter Distribution in the Cake Layer to Precisely Reveal Ultrafiltration Fouling Mechanisms
  20. Concentration Polarization Enabled Reactive Coating of Nanofiltration Membranes with Zwitterionic Hydrogel
  21. Water Influence on the Uniaxial Tensile Behavior of Polytetrafluoroethylene-Coated Glass Fiber Fabric
  22. Artificial Weathering Mechanisms of Uncoated Structural Polyethylene Terephthalate Fabrics with Focus on Tensile Strength Degradation
  23. Feasibility of graphene–polymer composite membranes for forward osmosis applications
  24. Novel finely structured polymer aerogels using organogelators as a structure-directing component
  25. Soft synthetic microgels as mimics of mycoplasma
  26. Mixed Poiseuille-Knudsen flow model for Gas Liquid Displacement porometry data treatment
  27. Modification of Polysulfone Ultrafiltration Membranes via Addition of Anionic Polyelectrolyte Based on Acrylamide and Sodium Acrylate to the Coagulation Bath to Improve Antifouling Performance in Water Treatment
  28. Tailoring and Remotely Switching Performance of Ultrafiltration Membranes by Magnetically Responsive Polymer Chains
  29. Polymer Nanocomposite Ultrafiltration Membranes: The Influence of Polymeric Additive, Dispersion Quality and Particle Modification on the Integration of Zinc Oxide Nanoparticles into Polyvinylidene Difluoride Membranes
  30. Preparation and characterization of polyzwitterionic hydrogel coated polyamide‐based mixed matrix membrane for heavy metal ions removal
  31. Tailored CNTs Buckypaper Membranes for the Removal of Humic Acid and Separation of Oil-In-Water Emulsions
  32. One-Step Preparation of Antifouling Polysulfone Ultrafiltration Membranes via Modification by a Cationic Polyelectrolyte Based on Polyacrylamide
  33. One-step preparation of porous cellulose/chitosan macro-spheres from ionic liquid-based solutions
  34. Polyethyleneoxide‐ b ‐poly(isopropyl methacrylate) diblock copolymers as novel material for ultrafiltration membranes
  35. Tunable and switchable nanoparticle separation with thermo-responsive track-etched membranes prepared by controlled surface-initiated polymerization of poly(N-isopropylacrylamide)
  36. Influence of Surface Micro-Patterning and Hydrogel Coating on Colloidal Silica Fouling of Polyamide Thin-Film Composite Membranes
  37. Glucose-Responsive Polymeric Hydrogel Materials: From a Novel Technique for the Measurement of Glucose Binding toward Swelling Pressure Sensor Applications
  38. Tailoring Surface Characteristics of Polyamide Thin-Film Composite Membranes toward Pronounced Switchable Wettability
  39. Calorimetric studies of PEO-b-PMMA and PEO-b-PiPMA diblock copolymers synthesized via atom transfer radical polymerization
  40. Potassium-sensitive poly(N-isopropylacrylamide)-based hydrogels for sensor applications
  41. A highly selective protein adsorber via two-step surface-initiated molecular imprinting utilizing a multi-functional polymeric scaffold on a macroporous cellulose membrane
  42. Hollow fiber membrane lumen modified by polyzwitterionic grafting
  43. Assessing biofouling resistance of a polyamide reverse osmosis membrane surface-modified with a zwitterionic polymer
  44. Degradation of Polymeric Brominated Flame Retardants: Development of an Analytical Approach Using PolyFR and UV Irradiation
  45. Erratum to “Capillary pore membranes with grafted diblock copolymers showing reversibly changing ultrafiltration properties with independent response to ions and temperature” [J. Mem. Sci. 514 (2016) 510–517]
  46. Macro-initiator mediated surface selective functionalization of ultrafiltration membranes with anti-fouling hydrogel layers applicable to ready-to-use capillary membrane modules
  47. Improved Antifouling Properties of Polydimethylsiloxane Films via Formation of Polysiloxane/Polyzwitterion Interpenetrating Networks
  48. Magnetoresponsive Poly(ether sulfone)-Based Iron Oxide cum Hydrogel Mixed Matrix Composite Membranes for Switchable Molecular Sieving
  49. Capillary pore membranes with grafted diblock copolymers showing reversibly changing ultrafiltration properties with independent response to ions and temperature
  50. Effect of annealing temperature on pore formation in preparation of advanced polyethylene battery separator membranes
  51. Preparation and characterization of low fouling novel hybrid ultrafiltration membranes based on the blends of GO−TiO2 nanocomposite and polysulfone for humic acid removal
  52. Surface wettability and energy effects on the biological performance of poly-3-hydroxybutyrate films treated with RF plasma
  53. A fast and reliable approach to benchmark low pressure hollow fibre filtration membranes for water purification
  54. Antifouling and Antibacterial Multifunctional Polyzwitterion/Enzyme Coating on Silicone Catheter Material Prepared by Electrostatic Layer-by-Layer Assembly
  55. Membrane-based purification of proteins from nanoparticle dispersions: Influences of membrane type and ultrafiltration conditions
  56. Monoclonal antibody capture from cell culture supernatants using epitope imprinted macroporous membranes
  57. Novel magneto-responsive membrane for remote control switchable molecular sieving
  58. Oxygen and ammonia plasma treatment of poly(3-hydroxybutyrate) films for controlled surface zeta potential and improved cell compatibility
  59. Ultrafiltration membrane-based purification of bioconjugated gold nanoparticle dispersions
  60. Poly(N,N-dimethylaminoethyl methacrylate) Brushes: pH-Dependent Switching Kinetics of a Surface-Grafted Thermoresponsive Polyelectrolyte
  61. Isotropic macroporous polyethersulfone membranes as competitive supports for high performance polyamide desalination membranes
  62. Nano-hydroxyapatite-coated metal-ceramic composite of iron-tricalcium phosphate: Improving the surface wettability, adhesion and proliferation of mesenchymal stem cells in vitro
  63. Ultrafiltration membranes with markedly different pH- and ion-responsivity by photografted zwitterionic polysulfobetain or polycarbobetain
  64. Design of Thermally Responsive Polymeric Hydrogels for Brackish Water Desalination: Effect of Architecture on Swelling, Deswelling, and Salt Rejection
  65. Detoxification of hexavalent chromium in wastewater containing organic substances using simonkolleite-TiO2 photocatalyst
  66. Gating mechanism under pressure
  67. Electropolymerized Molecularly Imprinted Polypyrrole Film for Sensing of Clofibric Acid
  68. Novel functionalization of porous polypropylene microfiltration membranes: via grafted poly(aminoethyl methacrylate) anchored Schiff bases toward membrane adsorbers for metal ions
  69. Nanoporous Polymer Filters and Membranes, Selective Filters
  70. Thin-film composite membranes for organophilic nanofiltration based on photo-cross-linkable polyimide
  71. Routes towards catalytically active TiO2doped porous cellulose
  72. Quaternized polysulfone and graphene oxide nanosheet derived low fouling novel positively charged hybrid ultrafiltration membranes for protein separation
  73. Two step and one step preparation of porous nanocomposite cellulose membranes doped with TiO2
  74. Stable zinc oxide nanoparticle dispersions in ionic liquids
  75. Macroinitiator-mediated photoreactive coating of membrane surfaces with antifouling hydrogel layers
  76. Low fouling negatively charged hybrid ultrafiltration membranes for protein separation from sulfonated poly(arylene ether sulfone) block copolymer and functionalized multiwalled carbon nanotubes
  77. Editorial
  78. Wettability of Thin Silicate-Containing Hydroxyapatite Films Formed by RF-Magnetron Sputtering
  79. Magnetic Fe3O4 nanoparticle heaters in smart porous membrane valves
  80. Novel ultrafiltration membranes with adjustable charge density based on sulfonated poly(arylene ether sulfone) block copolymers and their tunable protein separation performance
  81. Antibody-Imprinted Membrane Adsorber via Two-Step Surface Grafting
  82. Thermoresponsive ultrafiltration membranes for the switchable permeation and fractionation of nanoparticles
  83. Novel antifouling positively charged hybrid ultrafiltration membranes for protein separation based on blends of carboxylated carbon nanotubes and aminated poly(arylene ether sulfone)
  84. Fabrication of Ag/TiO2photocatalyst for the treatment of simulated hospital wastewater under sunlight
  85. ZnO-modified hybrid polymers as an antibacterial finish for textiles
  86. Nanofiltration Separation of Aqueous Polyethyleneglycol – Salt Mixtures
  87. Designing magnetic field responsive nanofiltration membranes
  88. Influence of the cation alkyl chain length of imidazolium-based room temperature ionic liquids on the dispersibility of TiO2 nanopowders
  89. Hofmeister Effect of Sodium Halides on the Switching Energetics of Thermoresponsive Polymer Brushes
  90. Protein-selective adsorbers by molecular imprinting via a novel two-step surface grafting method
  91. Preparation of a silicate-containing hydroxyapatite-based coating by magnetron sputtering: structure and osteoblast-like MG63 cells in vitro study
  92. Advanced ultrafiltration membranes based on functionalized poly(arylene ether sulfone) block copolymers
  93. Rheological studies on PNIPAAm hydrogel synthesis via in situ polymerization and on resulting viscoelastic properties
  94. Tuning the nanofiltration performance of thin film strong polyelectrolyte hydrogel composite membranes by photo-grafting conditions
  95. Toward remote-controlled valve functions via magnetically responsive capillary pore membranes
  96. Toward protein-selective membrane adsorbers: A novel surface-selective photo-grafting method
  97. Synthesis and Characterization of Poly(ethylene glycol) Methacrylate Based Hydrogel Networks for Anti-Biofouling Applications
  98. Surface modification of poly(ethylene terephthalate) fabric via photo-chemical reaction of dimethylaminopropyl methacrylamide
  99. Effect of membrane hydrophilization on ultrafiltration performance for biomolecules separation
  100. Grafting of titanium dioxide microspheres with a temperature-responsive polymer via surface-initiated atom transfer radical polymerization without the use of silane coupling agents
  101. Molecularly imprinted stimuli-responsive hydrogels for protein recognition
  102. Novel Membrane Adsorbers with Grafted Zwitterionic Polymers Synthesized by Surface-Initiated ATRP and Their Salt-Modulated Permeability and Protein Binding Properties
  103. UV-Photo Graft Functionalization of Polyethersulfone Membrane with Strong Polyelectrolyte Hydrogel and Its Application for Nanofiltration
  104. Dispersions of Various Titania Nanoparticles in Two Different Ionic Liquids
  105. Performance of Thin-Layer Hydrogel Polyethersulfone Composite Membranes during Dead-End Ultrafiltration of Various Protein Solutions
  106. Cross-flow ultrafiltration of protein solutions through unmodified and surface functionalized polyethersulfone membranes – Effect of process conditions on separation performance
  107. Factors affecting the sieving behavior of anti-fouling thin-layer cross-linked hydrogel polyethersulfone composite ultrafiltration membranes
  108. Dispersions of silica nanoparticles in ionic liquids investigated with advanced rheology
  109. Systematic Investigation of Dispersions of Unmodified Inorganic Nanoparticles in Organic Solvents with Focus on the Hansen Solubility Parameters
  110. Novel hydrogel pore-filled composite membranes with tunable and temperature-responsive size-selectivity
  111. ZnO Nanoparticles-Chitosan Composite as Antibacterial Finish for Textiles
  112. Influence of alkyl chain length and molecular weight on the surface functionalization via adsorption/entrapment with biocidal cationic block copolymers
  113. Ultrafiltration of humic acid solutions through unmodified and surface functionalized low-fouling polyethersulfone membranes – Effects of feed properties, molecular weight cut-off and membrane chemistry on fouling behavior and cleanability
  114. Chemical and Physical Factors in Design of Antibiofouling Polymer Coatings
  115. Stimuli–responsive track-etched membranes via surface-initiated controlled radical polymerization: Influence of grafting density and pore size
  116. Magnetically Activated Micromixers for Separation Membranes
  117. Untersuchungen zur intrinsischen Schaltkinetik ultradünner thermoresponsiver Polymerbürsten
  118. Probing the Intrinsic Switching Kinetics of Ultrathin Thermoresponsive Polymer Brushes
  119. Preparation of thermo-responsive polypropylene membranes via surface entrapment of poly(N-isopropylacrylamide)-containing macromolecules
  120. Cylindrical Membrane Pores with Well-Defined Grafted Linear and Comblike Glycopolymer Layers for Lectin Binding
  121. Separation Membranes
  122. Porous Polymer Membranes by Manufacturing Technologies other than Phase Separation of Polymer Solutions
  123. Porous Flat Sheet, Hollow Fibre and Capsule Membranes by Phase Separation of Polymer Solutions
  124. Composites of functional polymeric hydrogels and porous membranes
  125. Amphiphilic gold nanoparticles: Synthesis, characterization and adsorption to PEGylated polymer surfaces
  126. Photo-chemical Surface Modification for the Control of Protein Adsorption on Textile Substrates
  127. Grafted Glycopolymer-Based Receptor Mimics on Polymer Support for Selective Adhesion of Bacteria
  128. Functional coatings for anti-biofouling applications by surface segregation of block copolymer additives
  129. The effects of (macro)molecular structure on hydrophilic surface modification of polypropylene membranes via entrapment
  130. Tuning the ultrafiltration properties of anti-fouling thin-layer hydrogel polyethersulfone composite membranes by suited crosslinker monomers and photo-grafting conditions
  131. Zur photochemisch induzierten Wolff-Umlagerung cyclischer 2-Diazo-1, 3-dicarbonylverbindungen
  132. Zur Photolyse von 2-Diazocyclohexan-1,3-dionen in polymeren Schichten
  133. ChemInform Abstract: Positionally Addressable Parallel Synthesis on Continuous Membranes
  134. Model Based Quantification of Internal Flow Distributions from Breakthrough Curves of Flat Sheet Membrane Chromatography Modules
  135. Anti-nonspecific Protein Adsorption Properties of Biomimetic Glycocalyx-like Glycopolymer Layers: Effects of Glycopolymer Chain Density and Protein Size
  136. Surface modification of polypropylene microfiltration membrane via entrapment of an amphiphilic alkyl oligoethyleneglycolether
  137. Fouling effects of humic and alginic acids in nanofiltration and influence of solution composition
  138. Fouling control in sugarcane juice ultrafiltration with surface modified polysulfone and polyethersulfone membranes
  139. Surface-Initiated Polymerization on Laser-Patterned Templates: Morphological Scaling of Nanoconfined Polymer Brushes
  140. Block Copolymer Photo-Grafted Poly(Ethylene Terephthalate) Capillary Pore Membranes Distinctly Switchable by Two Different Stimuli
  141. Synthesis of block copolymers for surface functionalization with stimuli-responsive macromolecules
  142. High performance polyethersulfone microfiltration membranes having high flux and stable hydrophilic property
  143. Influence of pore structure and architecture of photo-grafted functional layers on separation performance of cellulose-based macroporous membrane adsorbers
  144. Fouling in microfiltration of wine: The influence of the membrane polymer on adsorption of polyphenols and polysaccharides
  145. Double Stimuli-Responsive Ultrafiltration Membranes from Polystyrene- block -poly( N , N -dimethylaminoethyl methacrylate) Diblock Copolymers
  146. Tailored “Grafting-From” Functionalization of Microfiltration Membrane Surface Photo-Initiated by Immobilized Iniferter
  147. Influences of solution chemistry and polymeric natural organic matter on the removal of aquatic pharmaceutical residuals by nanofiltration
  148. Self-Supporting, Double Stimuli-Responsive Porous Membranes From Polystyrene-block-poly(N,N-dimethylaminoethyl methacrylate) Diblock Copolymers
  149. Effect of synthesis composition on the swelling pressure of polymeric hydrogels
  150. Cylindrical Pores Responding to Two Different Stimuli via Surface-Initiated Atom Transfer Radical Polymerization for Synthesis of Grafted Diblock Copolymers
  151. Fouling behavior of aqueous solutions of polyphenolic compounds during ultrafiltration
  152. Characteristics, performance and stability of polyethersulfone ultrafiltration membranes prepared by phase separation method using different macromolecular additives
  153. Protein adsorbers from surface-grafted copolymers with selective binding sites
  154. Structure variations of the grafted functional polymer brush enhance membrane adsorber performance
  155. Photo-irradiation for preparation, modification and stimulation of polymeric membranes
  156. Simultaneous Determination of the Micro-, Meso-, and Macropore Size Fractions of Porous Polymers by a Combined Use of Fourier Transform Near-Infrared Diffuse Reflection Spectroscopy and Multivariate Techniques
  157. Ultrafiltration of polysaccharide–protein mixtures: Elucidation of fouling mechanisms and fouling control by membrane surface modification
  158. Detailed analysis of membrane adsorber pore structure and protein binding by advanced microscopy
  159. Synthesis and Performance of PP Microfiltration Membranes Grafted with Polymer Layers of Different Structure
  160. High-performance thin-layer hydrogel composite membranes for ultrafiltration of natural organic matter
  161. Preparation and characterization of porous anion-exchange membrane adsorbers with high protein-binding capacity
  162. Polypropylene-based membrane adsorbers via photo-initiated graft copolymerization: Optimizing separation performance by preparation conditions
  163. Surface-initiated atom transfer radical polymerization: A new method for preparation of polymeric membrane adsorbers
  164. Sugarcane juice ultrafiltration: FTIR and SEM analysis of polysaccharide fouling
  165. Influence of the strongly anisotropic cross-section morphology of a novel polyethersulfone microfiltration membrane on filtration performance
  166. Controlled Pore Functionalization of Poly(ethylene terephthalate) Track-Etched Membranes via Surface-Initiated Atom Transfer Radical Polymerization
  167. Synergist Immobilization Method for Photo-Grafting: Factors Affecting Surface Selectivity
  168. Preparation and Characterization of Novel Solvent-Resistant Nanofiltration Composite Membranes Based on Crosslinked Polyurethanes
  169. Photografted Thin Polymer Hydrogel Layers on PES Ultrafiltration Membranes:  Characterization, Stability, and Influence on Separation Performance
  170. Dextran fouling of polyethersulfone ultrafiltration membranes—Causes, extent and consequences
  171. Towards Nanoporous Membranes based on ABC Triblock Terpolymers
  172. Effect of Surface Modification on the Synthesis of Pore-Filling Polymeric Monoliths in Microfiltration Membranes Made from Poly(propylene) and Poly(ethylene terephthalate)
  173. Via surface functionalization by photograft copolymerization to low-fouling polyethersulfone-based ultrafiltration membranes
  174. Polymere Hydrogele in der Abdichtungstechnik – Untersuchungen zum Quellungsdruck
  175. Method and Model for the Analysis of Gel-Blocking Effects during the Swelling of Polymeric Hydrogels
  176. Permeability and Electrokinetic Characterization of Poly(ethylene terephthalate) Capillary Pore Membranes with Grafted Temperature-Responsive Polymers †
  177. Enantio-selective MIP “nano-monolith” composite membranes
  178. Insights into polysaccharide fouling of ultrafiltration membranes
  179. Performance of surface modified polyethersulfone membranes for ultrafiltration of aquatic humic substances
  180. Functionalized track-etched membranes as versatile tool to investigate stimuli-responsive polymers for “smart” nano- and microsystems
  181. Toward nanoporous composite membranes with tailored block copolymers as selective layer
  182. Effects of photo-initiation and monomer composition onto performance of graft-copolymer based membrane adsorbers
  183. Covalently coupled nanoparticles in capillary pores as enzyme carrier and as turbulence promoter to facilitate enzymatic polymerizations in flow-through enzyme–membrane reactors
  184. Characterizing solute binding to macroporous ion exchange membrane adsorbers using confocal laser scanning microscopy
  185. Oberflächenmodifikationen
  186. Macroporous Poly(N-isopropylacrylamide) Hydrogels with Adjustable Size “Cut-off” for the Efficient and Reversible Immobilization of Biomacromolecules
  187. Deposition of functionalized calcium phosphate nanoparticles on functionalized polymer surfaces
  188. Advanced functional polymer membranes
  189. Polymeric membrane fouling in sugarcane juice ultrafiltration: role of juice polysaccharides
  190. Propylene/1-Hexene Copolymer as a Tailor-Made Poly(propylene) for Membrane Preparation via the Thermally Induced Phase Separation (TIPS) Process
  191. Surface-selective photo-grafting on porous polymer membranes via a synergist immobilization method
  192. Influence of ultrafiltration membrane characteristics on adsorptive fouling with dextrans
  193. Syndiotactic polypropylene as potential material for the preparation of porous membranes via thermally induced phase separation (TIPS) process
  194. Size-Selective Protein Adsorption to Polystyrene Surfaces by Self-Assembled Grafted Poly(ethylene Glycols) with Varied Chain Lengths
  195. Electrochemical and Other Transport Properties of Nanoporous Track-Etched Membranes Studied by the Current Switch-Off Technique
  196. Porous Polypropylene Membranes with Different Carboxyl Polymer Brush Layers for Reversible Protein Binding via Surface-Initiated Graft Copolymerization
  197. Surface Modification of Polypropylene Microporous Membranes with a Novel Glycopolymer
  198. Surface modification of polypropylene microfiltration membranes by the immobilization of poly(N-vinyl-2-pyrrolidone): a facile plasma approach
  199. Photoreactive Functionalization of Poly(ethylene terephthalate) Track-Etched Pore Surfaces with ?Smart? Polymer Systems
  200. Insights into the mechanism of molecular imprinting by immersion precipitation phase inversion of polymer blends via a detailed morphology analysis of porous membranes
  201. Thin, highly crosslinked polymer layer synthesized via photoinitiated graft copolymerization on a self-assembled-monolayer-coated gold surface
  202. Comparison of thin-layer and bulk MIPs synthesized by photoinitiatedin situ crosslinking polymerization from the same reaction mixtures
  203. Molecularly Imprinted Polymer Films and Membranes
  204. Evaluation of molecularly imprinted polymer blend filtration membranes under solid phase extraction conditions
  205. Membrane separations using molecularly imprinted polymers
  206. Molecular imprinting of cellulose acetate-sulfonated polysulfone blend membranes for Rhodamine B by phase inversion technique
  207. ELI_CAP-Affinitätsmembran und Immobilisierungsmatrix für Life Sciences-Anwendungen
  208. Affinity Membranes as a Tool for Life Science Applications
  209. Polymerization of Glucans by Enzymatically Active Membranes
  210. Surface functionalized microfiltration membranes for affinity separation
  211. Molecularly imprinted composite membranes for selective binding of desmetryn from aqueous solutions
  212. Novel molecularly imprinted polymer (MIP) composite membranes via controlled surface and pore functionalizations
  213. Preparation and characterization of a novel solvent-resistant and autoclavable polymer membrane
  214. Impedometric herbicide chemosensors based on molecularly imprinted polymers
  215. Thin layer molecularly imprinted microfiltration membranes by photofunctionalization using a coated α-cleavage photoinitiator
  216. Molecularly imprinted polymer membranes for substance-selective solid-phase extraction from water by surface photo-grafting polymerization
  217. Intermolecular Forces between a Protein and a Hydrophilic Modified Polysulfone Film with Relevance to Filtration
  218. Surface Functionalization of Porous Polypropylene Membranes with Molecularly Imprinted Polymers by Photograft Copolymerization in Water
  219. Optimizing Cell−Surface Interactions by Photografting of Poly(ethylene glycol)
  220. Novel enzyme-membrane reactor for polysaccharide synthesis
  221. Receptor and transport properties of imprinted polymer membranes – a review
  222. Synthesis of photoreactive -4-azidobenzoyl--methoxy-poly(ethylene glycol)s and their end-on photo-grafting onto polysulfone ultrafiltration membranes
  223. Synthesis of photoreactiveα-4-azidobenzoyl-ω-methoxy-poly(ethylene glycol)s and their end-on photo-grafting onto polysulfone ultrafiltration membranes
  224. Synthesis of photoreactive α-4-azidobenzoyl-ω-methoxy-poly(ethylene glycol)s and their end-on photo-grafting onto polysulfone ultrafiltration membranes
  225. Ultrafiltration membrane surfaces with grafted polymer ‘tentacles’: preparation, characterization and application for covalent protein binding
  226. Chemically and morphologically defined ultrafiltration membrane surfaces prepared by heterogeneous photo-initiated graft polymerization
  227. Novel high performance photo-graft composite membranes for separation of organic liquids by pervaporation
  228. Intermolecular Forces between Proteins and Polymer Films with Relevance to Filtration
  229. Polyacrylonitrile enzyme ultrafiltration membranes prepared by adsorption, cross-linking, and covalent binding
  230. Novel photochemical surface functionalization of polysulfone ultrafiltration membranes for covalent immobilization of biomolecules
  231. Photograft-polymer-modified microporous membranes with environment-sensitive permeabilities
  232. Photo-bromination and photo-induced graft polymerization as a two-step approach for surface modification of polyacrylonitrile ultrafiltration membranes
  233. Immobilization of enzymes in photochemically cross-linked polyvinyl alcohol
  234. Photo-induced graft polymerization surface modifications for the preparation of hydrophilic and low-proten-adsorbing ultrafiltration membranes
  235. Immobilization of enzymes onto modified polyacrylonitrile membranes: Application of the acyl azide method
  236. Immobilization of enzymes onto modified polyacrylonitrile membranes: Application of the acyl azide method
  237. Surface modification of ultrafiltration membranes by low temperature plasma II. Graft polymerization onto polyacrylonitrile and polysulfone
  238. ESR studies of chemically modified and photocrosslinked poly(vinyl alcohol) gels
  239. Surface modification of ultrafiltration membranes by low temperature plasma. I. Treatment of polyacrylonitrile
  240. Gas-phase photoinduced graft polymerization of acrylic acid onto polyacrylonitrile ultrafiltration membranes
  241. FT-IR spectroscopic investigations of photochemical grafting of amphiphiles onto polyacrylonitrile surfaces
  242. Reactions of primary amines and alcohols with 4-toluoyl azide
  243. Photomodifizierung von Ultrafiltrationsmembranen, 1. Photochemiche Modifizierungen von Polyacrylnitril-Ultrafiltrationsmembranen mit Arylaziden
  244. Photomodifizierung von Ultrafiltrationsmembranen, 2. Ultrafiltrationseigenschaften von mit Arylaziden photochemisch modifizierten Polyacrylnitril-membranen
  245. Transport and reaction behavior of invertase ultrafiltration membranes made from substituted polysulfone
  246. Crystal and molecular structure of 2-diazo-5-phenyl-cyclohexan-1,3-dione
  247. Crystal and molecular structure of 5-diazo-2,2-dimethyl-4,6-dioxo-1,3-dioxane and 5-diazo-1,3-dimethylpyrimidin-2,4,6-trione
  248. Photochemisch induzierte Reaktionen von 5-Diazobarbitursäuren in Lösung
  249. Polymeric Membranes for Molecular Separations