All Stories

  1. Investigation of polypyrrole deposition time on QCM sensitivity as aspergillus niger spore sensor
  2. Tuning Viscosity and Spin Time to Enhance the Thinnest rGO Film Coating in SPR Sensors
  3. Investigation of Acoustic Impedance and Morphology of Vacuum-Thermally Evaporated Polypyrrole Layer and Its Potential for Quartz Crystal Microbalance Sensor
  4. Improving Optical Fiber-Based Surface Plasmon Resonance Performance Through Gold Film Modification via 3-Aminopropyltriethoxysilane Silanization
  5. Ultrashort pulse generation using tantalum aluminum carbide as a pulse modulator
  6. Stearic acid (SA)-based quartz crystal microbalance gas sensor for volatile organic compound detection under low concentration
  7. Microstructural transformation of GO to rGO by ascorbate acid green-agent enhanced using sonication method
  8. Characteristic Improvement of Reduced Graphene Oxide From Battery Waste Synthesized Using Modified Hummer’s Method
  9. The impact of heating rate on the synthesis of Ca3Co4O9 using rice starch as a soft template
  10. The Influence of Fe and Cr Dopant in the Synthesis of Ca3Co4O9 Thermoelectric Material on Crystal Structure, Crystal Size, Thermal Conductivity, and Electrical Conductivity
  11. Electrospun polyvinyl alcohol nanofiber scaffolds incorporated strontium-substituted hydroxyapatite from sand lobster shells: synthesis, characterization, and in vitro biological properties
  12. RETRACTED: Highly sensitive detection of low-concentration sodium chloride solutions based on a gold-coated prism in Kretschmann setup
  13. Enhancing surface morphology, mechanical, and wettability properties of PVA/chitosan/HAp nanofiber scaffold through dielectric barrier discharge plasma treatment
  14. Prevention of particle agglomeration in sol–gel synthesis of TiO2 nanoparticles via addition of surfactant
  15. THE EFFECT OF SPIN COATING’S SPEED ON GRAPHENE-OXIDE’S LAYER TOPOGRAPHY AND QCM VISCOELASTICITY
  16. Effects of thickness and roughness on plasmonic characteristics of gold thin films deposited on polished optical fiber
  17. Mechanical, degradation rate, and antibacterial properties of a collagen-chitosan/PVA composite nanofiber
  18. Morphology, porosity, and biodegradation of PVA/PEG/chitosan nanofiber scaffolds for skin tissue engineering
  19. Rotational speed effect of the planetary ball milling on the particle size and crystal structure of CaMnO3 as a thermoelectric material
  20. Oxygen Gas Vacuum Plasma Treatment on PVA/Chitosan/HAp Scaffold Nanofiber
  21. The Impedance Analysis of a Viscoelastic Petalous Structured Stearic Acid Functional Layer Deposited on a QCM
  22. Synthesis TiO2 using sonochemical method and responses the CO2 gas of the nanoparticle TiO2 layers on the QCM sensor surfaces
  23. Analysis of Optical Emission Spectra during Nitrogen-Plasma Treatment to Control the Wettability of Polystyrene Surface
  24. Effect of Evaporation Deposition Time on Thickness and Impedance Value of Polyaniline Layers
  25. Performance test of an aerosol concentration measurement system based on quartz crystal microbalance
  26. Effect of pressure chamber variations on temperature (Te) and electron density (Ne) on nitrogen plasma diagnostics using optical emission spectroscopy
  27. Fabrication of Micro-Pillar by plasma etching texturing of Carbon-Based thin film
  28. Nanostructure, porosity and tensile strength of PVA/Hydroxyapatite composite nanofiber for bone tissue engineering
  29. Ultra thick polystyrene coating on quartz crystal microbalance sensor
  30. Effects of ZnO nanoparticles on the antifungal performance of Fe3O4/ZnO nanocomposites prepared from natural sand
  31. Influence of electrolyte concentration on static and dynamic Lead-Acid battery
  32. Impedance Spectrum of QCM Sensor Coated With 18-Crown-6-Ether Solved in THF, Chloroform and Toluene
  33. Optical Emission Spectroscopy Study of the Electron Temperature and Electron Density Dependence on the Pressure Chamber for the Carbon Deposition Produced by Argon Plasma Sputtering
  34. Swelling Effect Observation of The Copper Phthalocyanine Layer on QCM and Its Effect on Surface Roughness and Morphology Changes
  35. Influence of the Nitrogen exposure time to the plasma treatment on the wettability of polystyrene surfaces
  36. Plasma intensification in 2 MHz RF glow discharge in carbon film plasma sputtering deposition by means of a hollow cathode
  37. Morphology, porosity, and biodegradation of PVA/CS/PEG/HAp nanofiber composites as scaffold in bone tissue engineering
  38. Green synthesis of Fe3O4 nanoparticles based on biosurfactant Saccharum officinarum extract
  39. A study of the correlation between fine particle mass loading effect and frequency shift of a bare QCM
  40. The effect of KCL solution ionic strength to QCM sensor response coated with PVC-polystyrene-crown ether
  41. The design and optimization process of ball mill to reduce particle size of calcium carbonate materials
  42. Identification of the relationship of carbon dioxide concentration and the frequency changes of a quartz crystal microbalance (QCM) oscillation sensor as a preliminary study of a carbon dioxide gas sensor
  43. Electrode size influence on static and dynamic single cell lead-acid battery
  44. Solvent Effect on Viscoelastic Behaviour and Morphology of Polyaniline Coating at QCM Sensor
  45. OPTICAL EMISSION SPECTROSCOPY STUDIES DURING NITROGEN PLASMA OF POLYSTYRENE SURFACES MODIFICATION
  46. The Role of DC Biased Plasma Treatment of Polystyrene on the Formation of the C≡N Functional Group Controlling Its Hydrophobicity
  47. Influence of discharge current on 3 cells dynamic lead-acid batteries performance
  48. Photodetector Characterization Based on DSSC (Dye-Sensitized Solar Cell)
  49. Nanostructure, Band Gap, and Antibacterial Activity of Spinel Fe2MO4/OO Magnetic Fluids
  50. Electron temperature & density is a key role for the surface modification's process
  51. Solid-State Sintering Synthesis of Biphasic Calcium Phosphate/Alumina Ceramic Composites and Their Mechanical Behaviors
  52. Sonochemical Synthesis of Nano-Hydroxyapatite/Chitosan Biomaterial Composite from Shellfish and Their Characterizations
  53. NITRIDING OF PURE TITANIUM BY HIGH DENSITY PLASMA USING H2-N2 GAS MIXTURE AT LOW TEMPERATURE
  54. Surface Modification of Polystyrene by Nitrogen Plasma Treatment
  55. DEVELOPING AND CHARACTERIZATION OF AN ULTRAFINE FILTER MADE OF BANANA LEAF AND WATER HYACINTH TO REDUCE MOTORCYCLE EMISSION
  56. Observation of the Polystyrene Swelling Effect using Quartz Crystal Microbalance
  57. Stability of Polystyrene Film Surface Wettability Modified Using Oxygen Plasma
  58. Surface Profile of Polystyrene Film on the QCM sensor Deposited by Ultrasonic Atomizer Spray Coating
  59. The effect of molecular weight on the surface wettability of polystyrene treated with nitrogen plasma
  60. Surface Modification of Polystyrene Coating on QCM Sensor using Ambient Air Plasma at Low Pressure
  61. Plasma Power Effect on the Surfaces of a Quartz Crystal During Etching using Tetrafluoroethane Gas
  62. Optimization of process parameters in the RF-DC plasma N2-H2for AISI420moldsanddies
  63. Low-Cost Contact Angle Measurement System for QCM Sensor
  64. The Effect of Substrate Temperature on Surface Modification of Polystyrene by using Nitrogen Plasma
  65. EFFECT OF UV RADIATION DURATION AND MOLECULAR WEIGHT TO HYDROPHOBICITY AND SURFACE ROUGHNESS OF POLYSTYRENE COATING ON QCM SENSOR
  66. The effect of RF-DC plasma N2-H2 in the selective hardening process for micro-patterned AISI420
  67. Viscoelastic and Morphological Behavior of Stearic Acid Layer on Top of Polystyrene as Immobilisation Matrix for QCM Sensor
  68. Modification of Polystyrene Morphology and its Influence to the Coated Zinc Phthalocyanine Layer and Frequency Change in QCM Sensor
  69. Functionality of Sensing layer
  70. Solvent Effect on Morphology of Polystyrene Coating and their Role to Improvement for Biomolecule Immobilization in Application of QCM Based Biosensor
  71. Influence of the Waveform and DC Offset on the Asymmetric Hysteresis Loop in Au/PZT/Pt/Al<sub>2</sub>O<sub>3</sub>/SiO<sub>2</sub>/Si Thin Films Prepared by MOCVD Method
  72. Influence of the Top Metal Electrode on P-V Hysteresis Loops Behavior of 1-μm Thick PZT Films Deposited on a Pt/TiN/Si Substrate Prepared by MOCVD
  73. RETRACTED: Studies of Asymmetric Hysteresis Loops and Leakage Current Behaviors in Pt/Al<sub>2</sub>O<sub>3</sub>/SiO<sub>2</sub>/Si /PZT/Au Structures Prepared by MOCVD Method