All Stories

  1. Future business models for hydrogen in Swedish road transportation
  2. A minute-resolution downscaling algorithm for high-resolution global irradiance time series
  3. Investigation of thermodynamics performance of solar dryer equipped with double pass flat, v-corrugated, and low-e coated collectors
  4. Two-Phase Fluid Dynamics in Proton Exchange Membrane Fuel Cells: Counter-Flow Liquid Inlets and Gas Outlets at the Electrolyte-Cathode Interface
  5. Effect of fiber curvature on gas diffusion layer two-phase dynamics of proton exchange membrane fuel cells
  6. Assessing the Performance of a Proton Exchange Membrane Green Hydrogen Generation System through Stack and Balance of Plant Modeling
  7. Assessing the Performance of a Proton Exchange Membrane Green Hydrogen Generation System through Stack and Balance of Plant Modeling
  8. Numerical Investigation on Two-Phase Flow Pressure Drop in Cathode Channels of Proton Exchange Membrane Fuel Cells
  9. Two-Phase Fluid Dynamics in Proton Exchange Membrane Fuel Cells: Counter-Flow Liquid Inlets and Gas Outlets at the Electrolyte-Cathode Interface
  10. The Influence of bipolar plate wettability on performance and durability of a proton exchange membrane fuel cell
  11. Pore-scale study of two-phase flow in the gas diffusion layer of proton exchange membrane fuel cells: The impact of polytetrafluoroethylene content and gradient distribution
  12. Large eddy simulations of turbulent pipe flows at moderate Reynolds numbers
  13. Highly stable CuFe1.2Al.8O4 catalyst with low CO selectivity for hydrogen production in HT‐PEMFCs application
  14. Development of a novel solar dryer with an incorporated heat exchanger
  15. Temperature-dependent Study for Hydrogen Crossover in a Polymer Electrolyte Membrane used in a PEFC
  16. Modeling and Sizing of a Y-Shaped Laminar Flow Micro-Fluidic Fuel Cell
  17. Numerical Reconstruction of Proton Exchange Membrane Fuel Cell Gas Diffusion Layers
  18. The Business Model of an Emerging Hydrogen Market in the Swedish Transportation Sector – outlook towards 2050
  19. Highlights of Accelerated Degradation Mechanisms for Polymer Electrolyte Fuel Cell
  20. Relative humidity impact on the performance and internal resistances of a PEFC working at maximum output power
  21. Modeling and Sizing of a Y-Shaped Laminar Flow Micro-Fluidic Fuel Cell
  22. Numerical Reconstruction of Proton Exchange Membrane Fuel Cell Gas Diffusion Layers
  23. The Business Model of an Emerging Hydrogen Market in the Swedish Transportation Sector – outlook towards 2050
  24. Analysing Tortuosity for Solid Oxide Fuel Cell Anode Material: Experiments and Modeling
  25. (Digital Presentation) Mathematical Approximations for Monitoring the State of Charge and Computing Electrolyte Volume in Vanadium Redox Flow Battery Systems
  26. Electrochemical and molecular modelling studies of corrosion inhibition characteristics of imidazolines on 1Cr steel under sweet conditions
  27. High gas tightness ZrO2-added silicate glass sealant with low thermal stress for solid oxide fuel cells
  28. Numerical Modeling for Rapid Charging of Hydrogen Gas Vessel in Fuel Cell Vehicle
  29. Numerical simulation of two-phase flow in gas diffusion layer and gas channel of proton exchange membrane fuel cells
  30. Effect of Fiber Curvature on Gas Diffusion Layer Two-Phase Dynamics of a Proton Exchange Membrane Fuel Cell
  31. Mitigating Bhutanese Post-Harvest Losses with Solar Food Drying
  32. Thermodynamic performance in a liquid oxygen tank during active-pressurization under different gas injection temperatures
  33. Y2Mo3O12–Ba0.5Sr0.5Co0.8Fe0.2O3-δ cathode catalyst for proton-conducting solid oxide fuel cells
  34. Fluid sloshing hydrodynamics in a cryogenic fuel storage tank under different order natural frequencies
  35. (Digital Presentation) Temperature-Dependent Study for Electrochemical Surface Area on a Catalyst Layer Used in a PEFC
  36. (Digital Presentation) Temperature-Dependent Study for Hydrogen Permeability of a Polymer Electrolyte Membrane Used in a PEFC
  37. Investigation on the pressurized discharge performance from a liquid oxygen tank under different injected gas temperatures
  38. (Digital Presentation) Temperature-Dependent Study for Electrochemical Surface Area on a Catalyst Layer Used in a PEFC
  39. Impact of the Temperature on the Proton Conductivity and Power Output of a PEFC Operating at High Current Densities
  40. PREFACE
  41. Combined Solar and Membrane Drying Technologies for Sustainable Fruit Preservation in Low-Income Countries – prototype development, modelling, and testing
  42. Parametric study for electrode microstructure influence on SOFC performance
  43. A-Asterisk Algorithm as an Alternative to Evaluate the Geometric Tortuosity in Digitally Created SOFC Anodes
  44. Simulation of a Flat-Tube Solid Oxide Fuel Cell with Symmetric Double-Sided Cathode Considering Different Fuel Compositions
  45. A-Asterisk Algorithm as an Alternative to Evaluate the Geometric Tortuosity in Digitally Created SOFC Anodes
  46. Continuum scale modelling and complementary experimentation of solid oxide cells
  47. Transport Parameter Correlations for Digitally Created PEFC Gas Diffusion Layers by Using OpenPNM
  48. Polymer-based Cu/Ag composite as seed layer on insulating substrate for copper addition of multi-dimensional conductive patterns
  49. System behavior prediction by artificial neural network algorithm of a methanol steam reformer for polymer electrolyte fuel cell stack use
  50. Measurement of relative static permittivity and solvatochromic parameters of binary and ternary CO2-expanded green solvents
  51. Numerical simulation of solid oxide fuel cells comparing different electrochemical kinetics
  52. A multi‐input and single‐output voltage control for a polymer electrolyte fuel cell system using model predictive control method
  53. Analysis of Thermal Stress in a Solid Oxide Fuel Cell Due to the Sulfur Poisoning Interface of the Electrolyte and Cathode
  54. A microscopy-compatible temperature regulation system for single-cell phenotype analysis – demonstrated by thermoresponse mapping of microalgae
  55. Fabrication and characterisation of a silicon-borosilicate glass microfluidic device for synchrotron-based hard X-ray spectroscopy studies
  56. Combined Two-phase Co-flow and Counter-flow in a Gas Channel/Porous Transport Layer Assembly
  57. Simulation of a Double-Sided Cathode SOFC Comparing Different Electrochemical Reaction Kinetics
  58. Voltage Control for a Polymer Electrolyte Fuel Cell System By Model Predictive Control Controller
  59. Thermal stress analysis at the interface of cathode and electrolyte in solid oxide fuel cells
  60. Combined Two-phase Co-flow and Counter-flow in a Gas Channel/Porous Transport Layer Assembly
  61. A Detailed Analysis of Internal Resistance of a PEFC Comparing High and Low Humidification of the Reactant Gases
  62. Polymer electrolyte fuel cell modeling - A comparison of two models with different levels of complexity
  63. Temperature control strategy for polymer electrolyte fuel cells
  64. Electrospun fabrication of nanofibers as high-performance cathodes of solid oxide fuel cells
  65. Temperature Impact on the Internal Resistance of a Polymer Electrolyte Fuel Cell Considering the Electrochemical Impedance Spectroscopy Diagnosis
  66. High-performance solid oxide fuel cells with fiber-based cathodes for low-temperature operation
  67. Heat and Mass Transfer in Fuel Cells and Stacks
  68. In-situ chemical polymerization of Cu-Polythiophenes composite film as seed layer for direct electroplating on insulating substrate
  69. Electrochemical Synthesis of Ammonia Based on a Perovskite LaCrO3 Catalyst
  70. Dynamic modelling and controlling strategy of polymer electrolyte fuel cells
  71. Polymer Electrolyte Fuel Cell System Level Modelling and Simulation of Transient Behavior
  72. Empirical correlations for the performance of a PEFC considering relative humidity of fuel and oxidant gases
  73. Computational simulation data using the Lattice Boltzmann Method to generate correlations for gas diffusion layer parameters
  74. Performance experimental data of a polymer electrolyte fuel cell considering the variation of the relative humidity of reactants gases
  75. Structural and chemical imaging analysis of bitumen
  76. Diffusion parameter correlations for PEFC gas diffusion layers considering the presence of a water-droplet
  77. Dynamic contact angle modeling of droplet reattachment at the gas channel wall in polymer electrolyte fuel cells
  78. Progress in the use of electrospun nanofiber electrodes for solid oxide fuel cells: a review
  79. Hydrogen and Hydrogen-Rich Fuels: Production and Conversion to Electricity
  80. Impact of Carbon Deposition on Diffusion Parameters in Porous Anodes of Solid Oxide Fuel Cells Using the Lattice Boltzmann Method
  81. Integrated thin film resistive sensors for in situ temperature measurements in an acoustic trap
  82. Modeling of droplet detachment using dynamic contact angles in polymer electrolyte fuel cell gas channels
  83. A comparative study between D2Q9 and D2Q5 lattice Boltzmann scheme for mass transport phenomena in porous media
  84. Impact of water-drop presence on diffusion parameters of PEFC gas diffusion layers
  85. Modeling and Control Strategies of Proton Exchange Membrane Fuel Cells
  86. A microfluidic relative permittivity sensor for feedback control of carbon dioxide expanded liquid flows
  87. A suitable width-size of a channel flow for obtaining the velocity profiles by using the Lattice Boltzmann method
  88. Modeling and synchrotron imaging of droplet detachment in gas channels of polymer electrolyte fuel cells
  89. Modeling of solid oxide fuel cells with optimized interconnect designs
  90. Microstructures of bitumen observed by environmental scanning electron microscopy (ESEM) and chemical analysis using time-of-flight secondary ion mass spectrometry (TOF-SIMS)
  91. Microfluidic Control Board for High-Pressure Flow, Composition, and Relative Permittivity
  92. Visualization and Chemical Analysis of Bitumen Microstructures
  93. Coupling of Lattice Boltzmann and Volume of Fluid Approaches to Study the Droplet Behavior at the Gas Diffusion Layer/Gas Channel Interface
  94. Simple and Complex Polymer Electrolyte Fuel Cell Stack Models: A Comparison
  95. Coupling of Lattice Boltzmann and Volume of Fluid Approaches to Study the Droplet Behavior at the Gas Diffusion Layer/Gas Channel Interface
  96. Simple and Complex Polymer Electrolyte Fuel Cell Stack Models: A Comparison
  97. Dynamic pH determination at high pressure of aqueous additive mixtures in contact with dense CO2
  98. Stability Issues of Fuel Cell Models in the Activation and Concentration Regimes
  99. Mechanism of chromium poisoning the conventional cathode material for solid oxide fuel cells
  100. Thermal stress analysis of sulfur deactivated solid oxide fuel cells
  101. Binding of Lysozyme to Spherical Poly(styrenesulfonate) Gels
  102. Interface resolving two-phase flow simulations in gas channels relevant for polymer electrolyte fuel cells using the volume of fluid approach
  103. Effect of the Electrochemical Active Site on Thermal Stress in Solid Oxide Fuel Cells
  104. Thermal Stress Analysis of Solid Oxide Fuel Cells with Chromium Poisoning Cathodes
  105. Applicability of the lattice Boltzmann method to determine the ohmic resistance in equivalent resistor connections
  106. Influence of pulsed and continuous substrate inputs on freshwater bacterial community composition and functioning in bioreactors
  107. Flowing and pressurizing a solid-liquid two phase monodispersed fluid with high solid content in a transparent microfluidic high-pressure chip
  108. Thermal stress analysis of a planar anode-supported solid oxide fuel cell: Effects of anode porosity
  109. Enhancement of heat transfer in a square channel by roughened surfaces in rib-elements and turbulent flow manipulation
  110. Computational time and domain size analysis of porous media flows using the lattice Boltzmann method
  111. Pore-Scale Analysis of Diffusion Transport Parameters in Digitally Reconstructed SOFC Anodes with Gradient Porosity in the Main Flow Direction
  112. High pressure inertial focusing for separating and concentrating bacteria at high throughput
  113. Wavy Surface Cathode Gas Flow Channel Effects on Transport Processes in a Proton Exchange Membrane Fuel Cell
  114. Phase Behavior of Salt-Free Polyelectrolyte Gel–Surfactant Systems
  115. Pore-Scale Analysis of Diffusion Transport Parameters in Digitally Reconstructed SOFC Anodes with Gradient Porosity in the Main Flow Direction
  116. Influence of anisotropic gas diffusion layers on transport phenomena in a proton exchange membrane fuel cell
  117. Modeling of a Gradient Porosity SOFC Anode using the Lattice Boltzmann Method
  118. Comparing through-plane diffusibility correlations in PEFC gas diffusion layers using the lattice Boltzmann method
  119. Co-fabrication of nickel-YSZ cermet nanofibers via an electrospinning technique
  120. Fabrication of nickel-YSZ cermet nanofibers via electrospinning
  121. Efficiency and temperature of spur gears using spray lubrication compared to dip lubrication
  122. Thin film metal sensors in fusion bonded glass chips for high-pressure microfluidics
  123. Investigation of Heat Transfer and Fluid Flow Over Pocket Cavity in the Rear Part of Gas Turbine
  124. Predicting transport parameters in PEFC gas diffusion layers considering micro-architectural variations using the Lattice Boltzmann method
  125. A review of cell-scale multiphase flow modeling, including water management, in polymer electrolyte fuel cells
  126. Impact on Diffusion Parameters Computation in Gas Diffusion Layers, Considering the Land/Channel Region, Using the Lattice Boltzmann Method
  127. Review on Dimensionless Numbers Relevant for Polymer Electrolyte Fuel Cells
  128. Modeling of an anode supported solid oxide fuel cell focusing on thermal stresses
  129. Solid oxide fuel cell interconnect design optimization considering the thermal stresses
  130. Review on Dimensionless Numbers Relevant for Polymer Electrolyte Fuel Cells
  131. Impact on Diffusion Parameters Computation in Gas Diffusion Layers, Considering the Land/Channel Region, Using the Lattice Boltzmann Method
  132. Potential of Lattice Boltzmann Method to Determine the Ohmic Resistance in Porous Materials
  133. Fracture strength of glass chips for high-pressure microfluidics
  134. Advanced control of liquid water region in diffusion media of polymer electrolyte fuel cells through a dimensionless number
  135. A study of the efficiency of spur gears made of powder metallurgy materials – ground versus super-finished surfaces
  136. Influence of surface modifications and channel structure for microflows of supercritical carbon dioxide and water
  137. Modeling of mass and charge transport in a solid oxide fuel cell anode structure by a 3D lattice Boltzmann approach
  138. Influence of flow rate, temperature and pressure on multiphase flows of supercritical carbon dioxide and water using multivariate partial least square regression
  139. Modeling of Solid Oxide Fuel Cell with Anisotropic Conductivity
  140. Compress effects on porosity, gas-phase tortuosity, and gas permeability in a simulated PEM gas diffusion layer
  141. Analysis of Porosity and Tortuosity in a 2D Selected Region of Solid Oxide Fuel Cell Cathode Using the Lattice Boltzmann Method
  142. Highlights of Fuel Cell Modeling From a Lattice Boltzmann Method Point of View
  143. Unexpected transitions induced by spin-dependent, hyperfine and external magnetic-field interactions
  144. Comparison of humidified hydrogen and partly pre-reformed natural gas as fuel for solid oxide fuel cells applying computational fluid dynamics
  145. SOFC Cell Design Optimization Using the Finite Element Method Based CFD Approach
  146. Perspectives on Lattice Boltzmann Modeling of Transport Processes With Electrochemical Reactions in SOFCs
  147. Three-Dimensional Design Optimization of an Anode-Supported SOFC Using FEM
  148. Three dimensional modeling of an solid oxide fuel cell coupling charge transfer phenomena with transport processes and heat generation
  149. Three dimensional CFD modeling and experimental validation of an electrolyte supported solid oxide fuel cell fed with methane-free biogas
  150. 3D Modeling of an Anode Supported SOFC Using FEM and LBM
  151. Lattice Boltzmann Modeling of Advection-Diffusion Transport With Electrochemical Reactions in a Porous SOFC Anode Structure
  152. SOFC modeling considering hydrogen and carbon monoxide as electrochemical reactants
  153. Transport phenomena in solid oxide fuel cell electrodes focusing on heat transfer related to chemical reactions
  154. Grading the Amount of Electrochemical Active Sites along the Main Flow Direction of an SOFC
  155. ChemInform Abstract: Review of Catalyst Materials and Catalytic Steam Reforming Reactions in SOFC Anodes
  156. ChemInform Abstract: Simulation of Alternative Fuels for Potential Utilization in Solid Oxide Fuel Cells
  157. SOFC Modeling at the Cell Scale Including Hydrogen and Carbon Monoxide as Electrochemically Active Fuels
  158. The effect of heat transfer on the polarizations within an intermediate temperature solid oxide fuel cell
  159. SOFC modeling considering electrochemical reactions at the active three phase boundaries
  160. Review of catalyst materials and catalytic steam reforming reactions in SOFC anodes
  161. Simulation of alternative fuels for potential utilization in solid oxide fuel cells
  162. Analysis of Microscopic Anode Structure Effects on an Anode-Supported SOFC Including Knudsen Diffusion
  163. CFD Modeling: Different Kinetic Approaches for Internal Reforming Reactions in an Anode-Supported SOFC
  164. Modeling Analysis of Different Renewable Fuels in an Anode Supported SOFC
  165. Modeling Validation and Simulation of an Anode Supported SOFC Including Mass and Heat Transport, Fluid Flow and Chemical Reactions
  166. The Kinetics Effect in SOFCs on Heat and Mass Transfer Limitations: Interparticle, Interphase and Intraparticle Transport
  167. Review on modeling development for multiscale chemical reactions coupled transport phenomena in solid oxide fuel cells
  168. CFD Modeling Considering Different Kinetic Models for Internal Reforming Reactions in an Anode-Supported SOFC
  169. Modeling Analysis of Different Renewable Fuels in an Anode Supported SOFC
  170. Study on Catalytic Reactions in Solid Oxide Fuel Cells With Comparison to Gas Phase Reactions in Internal Combustion Engines
  171. Correlations between measures of executive attention and cortical thickness of left posterior middle frontal gyrus - a dichotic listening study
  172. SOFC Modeling Considering Internal Reforming by a Global Kinetics Approach
  173. LTNE Approach and Simulation for Anode-Supported SOFCs
  174. Using Dichotic Listening to Study Bottom-up and Top-down Processing in Children and Adults
  175. Chemical reacting transport phenomena and multiscale models for SOFCs
  176. HFSZEEMAN—A program for computing weak and intermediate field fine and hyperfine structure Zeeman splittings from MCDHF wave functions
  177. A tensorial approach to computational continuum mechanics using object-oriented techniques
  178. Sparse matrix ordering with Scotch
  179. Hydrodynamics of wetting