All Stories

  1. Techno-economic evaluation of an environmental-friendly processing route to extract rare earth elements from monazite
  2. Exploring the Relationship Between Fe-rich SFCA and SFCA-III and Their Presence in Sinter Strand and Pot-grate Sinter
  3. Deformation behaviors of hydrogen filled boron nitride and boron nitride - carbon nanotubes: Molecular dynamics simulations of proposed materials for hydrogen storage, gas sensing, and radiation shielding
  4. Nickel Laterite Beneficiation and Potential for Upgrading Using High Temperature Methods: A Review
  5. The Production of Rare Earth based Magnesium and Aluminium Alloys – A Review
  6. Deportment of Metals from E-Waste PCBs towards Alloy and Slag Phases during Smelting Using CaO-Al2O3-SiO2-B2O3 Slags
  7. Automated and Quantitative Mineralogy Applied to Chromite Ore Characterization and Beneficiation
  8. Metal and Oxide Sublimation from Lunar Regolith: A Kinetics Study
  9. Exploratory Study of Separation of Sulphidised Chrome Spinels from Reduced Ilmenite
  10. Porosity, Mineralogy, Strength, and Reducibility of Sinter Analogues from the Fe2O3 (Fe3O4)-CaO-SiO2 (FCS) Ternary System
  11. Variation in Iron Ore Sinter Mineralogy with Changes in Basicity
  12. Application of a Floatex density separator for iron recovery from Pilbara iron ore plant rejects
  13. The Direct Leaching of Nickel Sulfide Flotation Concentrates – A Historic and State-of-the-Art Review Part III: Laboratory Investigations into Atmospheric Leach Processes
  14. The Direct Leaching of Nickel Sulfide Flotation Concentrates - A Historic and State-of-the-Art Review Part II: Laboratory Investigations into Pressure Leaching
  15. The Direct Leaching of Nickel Sulfide Flotation Concentrates – A Historic and State-of-the-Art Review Part I: Piloted Processes and Commercial Operations
  16. Fundamentals of Silico-Ferrite of Calcium and Aluminium (SFCA) and SFCA-I Iron Ore Sinter Bonding Phase Formation: Effects of MgO Source on Phase Formation during Heating
  17. Distribution and characterization of heavy minerals in Meghna River sand deposits, Bangladesh
  18. Upgrading a Brahmaputra River sand from northern Bangladesh by flotation to produce a high-grade silica glass sand concentrate
  19. Estimation of the Generation and Value Recovery from E-waste Printed Circuit Boards: Bangladesh Case Study
  20. Beneficiation strategies to remove silica and alumina impurities from low-grade iron ores
  21. Kinetics and Mechanisms of Carbothermic Reduction of Weathered Ilmenite Using Palm Kernel Shell Biomass
  22. High-temperature carbothermal dephosphorization of Malaysian monazite
  23. Evaluation of concentrated solar thermal energy for iron ore agglomeration
  24. Thermodynamic modelling of ultra-high vacuum thermal decomposition for lunar resource processing
  25. Mineral Processing and Metal Extraction on the Lunar Surface - Challenges and Opportunities
  26. Kinetics of high temperature oxidation of end-of-life Ni/Cu/Ni coated NdFeB rare earth permanent magnets
  27. Alkaline sulphide leaching of tennantite in copper flotation concentrates to selectively dissolve arsenic
  28. Distribution, Separation and Characterisation of Valuable Heavy Minerals from the Brahmaputra River Basin, Kurigram District, Bangladesh
  29. Beneficiation of low-grade, goethite-rich iron ore using microwave-assisted magnetizing roasting
  30. Localised solution environments drive radionuclide fractionation in uraninite
  31. Automated Optical Image Analysis of Iron Ore Sinter
  32. Selective radionuclide co-sorption onto natural minerals in environmental and anthropogenic conditions
  33. Understanding the mobility and retention of uranium and its daughter products
  34. Phase Equilibria Study of CaO-Al2O3-SiO2-Na2O Slags for Smelting Waste Printed Circuit Boards
  35. Mechanism and microstructure evolution of high temperature oxidation of end-of-life NdFeB rare earth permanent magnets
  36. A comparative bio-oxidative leaching study of synthetic U-bearing minerals: Implications for mobility and retention
  37. Elaboration of alkali activated materials using a non-calcined red clay from phosphate mines amended with fly ash or slag: A structural study
  38. Effect of Temperature, Time, and Cooling Rate on the Mineralogy, Morphology, and Reducibility of Iron Ore Sinter Analogues
  39. Fundamentals of Silico-Ferrite of Calcium and Aluminum (SFCA) and SFCA-I Iron Ore Sinter Bonding Phase Formation: Effects of MgO on Phase Formation During Heating
  40. Evaluation of Dry Processing Technologies for Treating Low Grade Lateritic Iron Ore Fines
  41. Geochemistry of Recent Brahmaputra River Sediments: Provenance, Tectonics, Source Area Weathering and Depositional Environment
  42. Solar Carbothermic Reduction of Ilmenite Using Palm Kernel Shell Biomass
  43. Effect of impurity oxides on CWF (CaFe3O5) formation in lime magnetite pellets – part I: thermodynamic assessments and experimental investigations
  44. Effect of impurity oxides on CWF (CaFe3O5) formation in lime magnetite pellets – part II: microstructural analysis and physical and mechanical testing
  45. Deciphering the Complex Mineralogy of River Sand Deposits through Clustering and Quantification of Hyperspectral X-Ray Maps
  46. Study of the leaching and pore evolution in large particles of a sulfide ore
  47. Comparison of the chemistry and mineralogy of ilmenite concentrates sourced from fluvial (Brahmaputra River) and beach placer (Cox’s Bazar) deposits, Bangladesh
  48. Occurrence and distribution of valuable heavy minerals in sand deposits of the Jamuna River, Bangladesh
  49. Technological developments in processing Australian mineral sand deposits
  50. Process optimization using response surface methodology for the removal of thorium from aqueous solutions using rice-husk
  51. Characterisation of phosphorus and other impurities in goethite-rich iron ores – Possible P incorporation mechanisms
  52. Fundamentals of Silico-Ferrite of Calcium and Aluminium (SFCA) Iron Ore Sinter Bonding Phase Formation: Effects of Titanium on Crystallisation during Cooling
  53. Analyses of CWF (CaFe3O5) phase formation in lime-magnetite pellets
  54. Experimental study into the beneficiation of a ferruginous rare earth bearing lateritic ore by magnetising roasting and magnetic separation
  55. Comparison of the Mineralogy of Iron Ore Sinters Using a Range of Techniques
  56. Processing anatase ores for pigment production
  57. Characterisation of a ferruginous rare earth bearing lateritic ore and implications for rare earth mineral processing
  58. Fundamentals of Silico-Ferrite of Calcium and Aluminium (SFCA) Iron Ore Sinter Bonding Phase Formation: Effects of Basicity and Magnesium on Crystallisation during Cooling
  59. Alternative route for magnetite processing for lower carbon footprint iron-making through lime-magnetite pellets containing CaFe3O5
  60. Lime-Magnetite Pellets (LMPs) for Ironmaking
  61. A Review of the Chemistry, Structure and Formation Conditions of Silico-Ferrite of Calcium and Aluminum (‘SFCA’) Phases
  62. A Sulfur K-Edge XANES and Raman Study on the Effect of Chloride Ion on Bacterial and Chemical Leaching of Chalcopyrite at 25 °C
  63. Kinetics of uranium extraction from coffinite—A comparison with other common uranium minerals
  64. Radionuclide disposal using the pyrochlore supergroup of minerals as a host matrix—A review
  65. Heavy mineral resource potential of Tista river sands, Northern Bangladesh
  66. Selective sulphidation of impurities in weathered ilmenite. Part 1 – Applicability to different ilmenite deposits and simulated Becher kiln conditions
  67. High temperature oxidation of rare earth permanent magnets. Part 1 – Microstructure evolution and general mechanism
  68. Investigation into coal-based magnetizing roasting of an iron-rich rare earth ore and the associated mineralogical transformations
  69. Development of a new near infrared (NIR) tool for quantifying coffinite (USiO 4 ) in a moderately complex uranium ore analogue
  70. Predicting iron ore sinter strength through partial least square regression (PLSR) analysis of X-ray diffraction patterns
  71. Fundamentals of silico-ferrite of calcium and aluminium (SFCA) and SFCA-I iron ore sinter bonding phase formation: effects of mill scale addition
  72. Application of ferrous pyrometallurgy to the beneficiation of rare earth bearing iron ores – A review
  73. The effect of thermal pre-treatment on the dissolution of chalcopyrite (CuFeS2) in sulfuric acid media
  74. Thermodynamic stability of SFCA (silico-ferrite of calcium and aluminum) and SFCA-I phases
  75. Uranium leaching from synthetic betafite: [(Ca,U)2(Ti,Nb,Ta)2O7]
  76. Effects of Gibbsite, Kaolinite and Al-rich Goethite as Alumina Sources on Silico-Ferrite of Calcium and Aluminium (SFCA) and SFCA-I Iron Ore Sinter Bonding Phase Formation
  77. The influence of ore composition on sinter phase mineralogy and strength
  78. Effect of Addition of Mill Scale on Sintering of Iron Ores
  79. Hydrometallurgy
  80. Valuable heavy minerals from the Brahmaputra River sands of Northern Bangladesh
  81. Development of a niobium-doped titania inert anode for titanium electrowinning in molten chloride salts
  82. Effects of Sintering Materials and Gas Conditions on Formation of Silico-Ferrites of Calcium and Aluminium during Iron Ore Sintering
  83. Fundamentals of Silico-Ferrite of Calcium and Aluminium (SFCA) and SFCA-I Iron Ore Sinter Bonding Phase Formation: Effects of Titanomagnetite-based Ironsand and Titanium Addition
  84. Selective sulfidising roasting for the removal of chrome spinel impurities from weathered ilmenite ore
  85. Behavior of New Zealand Ironsand During Iron Ore Sintering
  86. Characterisation and leaching studies on the uranium mineral betafite [(U,Ca) 2 (Nb,Ti,Ta) 2 O 7 ]
  87. Recovery and processing of zircon from Murray Basin mineral sand deposits
  88. The application of automated electron beam mapping techniques to the characterisation of low grade, fine-grained mineralisation; potential problems and recommendations
  89. Analysis of Sulfidation Routes for Processing Weathered Ilmenite Concentrates Containing Impurities
  90. Sulfidation Kinetics of Natural Chromite Ore Using H2S Gas
  91. A review of acid leaching of uraninite
  92. Review of processing conditions for Murray Basin ilmenite concentrates
  93. The fate of chromium impurities during acid sulphate digestion of ilmenite concentrates
  94. Characterisation of titanium-rich heavy mineral concentrates from the Brahmaputra River basin, Bangladesh
  95. In situdiffraction studies of iron ore sinter bonding phase formation: QPA considerations and pushing the limits of laboratory data collection
  96. Synthesis and characterisation of the uranium pyrochlore betafite [(Ca,U)2(Ti,Nb,Ta)2O7]
  97. Thermodynamic assessment and experimental study of sulphidation of ilmenite and chromite
  98. Zircon Metamictisation study by Cathodoluminescence and X-ray Imaging
  99. Fundamentals of Silico-Ferrite of Calcium and Aluminum (SFCA) and SFCA-I Iron Ore Sinter Bonding Phase Formation: Effects of CaO:SiO2 Ratio
  100. The effect of [Fe]TOT on the dissolution of synthetic Pb-doped UO2 and Th-doped UO2
  101. Leaching behaviour of natural and heat-treated brannerite-containing uranium ores in sulphate solutions with iron(III)
  102. Geometallurgy of Australian uranium deposits
  103. An investigation on the dissolution of natural uraninite ores
  104. Geology and Mineralogy of Uranium Deposits from Mount Isa, Australia: Implications for Albitite Uranium Deposit Models
  105. Biotite and Apatite as Tools for Tracking Pathways of Oxidized Fluids in the Archean East Repulse Gold Deposit, Australia
  106. Chemical and micro-structural characterisation studies on natural uraninite and associated gangue minerals
  107. 3D representation of geochemical data, the corresponding alteration and associated REE mobility at the Ranger uranium deposit, Northern Territory, Australia
  108. Effect of Oxygen Partial Pressure on the Formation Mechanisms of Complex Ca-rich Ferrites
  109. In situ X-ray Diffraction Investigation of the Formation Mechanisms of Silico-Ferrite of Calcium and Aluminium-I-type (SFCA-I-type) Complex Calcium Ferrites
  110. Chemical and microstructural characterisation studies on natural and heat treated brannerite samples
  111. Preparation of Anhydrous Magnesium Chloride: Solid–Liquid Phase Diagram for the System MgCl 2 –NH 3 –C 2 H 4 [OH] 2 at 323 K
  112. Silico-ferrite of Calcium and Aluminum (SFCA) Iron Ore Sinter Bonding Phases: New Insights into Their Formation During Heating and Cooling
  113. Radiation damage in quartz from uranium-bearing sandstones
  114. Solubilities of Ammonia and Ammonium Chloride in Ammoniated and Nonammoniated Methanol and Ethylene Glycol between 298 K and 353 K
  115. Electron microbeam analysis techniques used for the characterization of industrial minerals
  116. Solid−Liquid Phase Diagram for the System MgCl 2 −H 2 O−C 2 H 4 (OH) 2 at 333 K
  117. Solid−Liquid Phase Diagram for the System MgCl 2 −NH 3 −CH 3 OH at 298 K
  118. Phosphorus and Other Impurities in Australian Iron Ores
  119. Alteration and associated impurity element enrichment in detrital ilmenites from the Murray Basin, southeast Australia: a product of multistage alteration
  120. Preparation of TiC powders and coatings by electrodeoxidation of solid TiO2in molten salts
  121. Oxidation state of europium in scheelite: Tracking fluid–rock interaction in gold deposits
  122. Mineralogical characterisation of Eucla Basin ilmenite concentrates – First results from a new global resource
  123. Characterisation and beneficiation of zircon-rich heavy mineral concentrates from central Kalimantan (Borneo, Indonesia)
  124. Removal of chrome spinels from Murray Basin ilmenites by low temperature roasting
  125. Foreword
  126. Mineral characterisation by EPMA mapping
  127. Chemical variability in chrome spinel grains from magnetically fractionated ilmenite concentrates: implications for processing
  128. Detrital chrome-spinel grains in heavy-mineral sand deposits from southeast Africa
  129. Development of Inert Anode Materials for Electrowinning in Calcium Chloride Melts
  130. Compositional and textural variation in detrital chrome-spinels from the Murray Basin, southeastern Australia
  131. Reaction sequences in the formation of silico-ferrites of calcium and aluminum in iron ore sinter
  132. In situX-ray diffraction analysis of iron ore sinter phases
  133. The magnesiow�stite: iron equilibrium and its implications for the activity-composition relations of (Mg,Fe)2SiO4 olivine solid solutions
  134. Subsolidus Phase Relationships in the System Fe2O3—Al2O3—TiO2 Between 1000 °C and 1300 °C.
  135. Subsolidus Phase Relationships in the System Fe2O3-Al2O3-TiO2between 1000° and 1300°C
  136. Importance of fine ore chemical composition and high temperature phase relations: applications to iron ore sintering and pelletising
  137. In-situX-ray diffraction studies of iron ore sinter phases
  138. Stability of silico-ferrite of calcium and aluminum (SFCA) in air-solid solution limits between 1240 °C and 1390 °C and phase relationships within the Fe2O3-CaO-Al2O3-SiO2 (FCAS) system
  139. Phase Relations in the System Fe2O3–Cr2O3–TiO2 between 1000 and 1300°C and the Stability of (Cr,Fe)2Tin−2O2n−1 Crystallographic Shear Structure Compounds
  140. Thermodynamic data from redox reactions at high temperatures. VI. Thermodynamic properties of CoO–MnO solid solutions from emf measurements
  141. Phase relations in the Fe-rich part of the system Fe2O3(-Fe3O4)-CaO-SiO2at 1240-1300°C and oxygen partial pressure of 5 × 10-3atm: implications for iron ore sinter
  142. Stability of SFC (silico-ferrite of calcium): solid solution limits, thermal stability and selected phase relationships within the Fe2O3-CaO-SiO2 (FCS) system
  143. Phase equilibria in the systems Fe 2 O 3 -MgO-TiO 2 and FeO-MgO-TiO 2 between 1173 and 1473 K, and Fe 2+ -Mg mixing properties of ilmenite, ferrous-pseudobrookite and ulvöspinel solid solutions
  144. Thermodynamic data from redox reactions at high temperatures. V. Thermodynamic properties of NiO?MnO solid solutions from emf measurements
  145. Thermodynamic data from redox reactions at high temperatures. III. Activity-composition relations in Ni-Pd alloys from EMF measurements at 850?1250 K, and calibration of the NiO+Ni-Pd assemblage as a redox sensor
  146. Thermodynamic data from redox reactions at high temperatures. IV. Calibration of the Re-ReO2 oxygen buffer from EMF and NiO+Ni-Pd redox sensor measurements
  147. Thermodynamic data from redox reactions at high temperatures. II. The MnO-0Mn3O4 oxygen buffer, and implications for the thermodynamic properties of MnO and Mn3O4
  148. Thermodynamic data from redox reactions at high temperatures. I. An experimental and theoretical assessment of the electrochemical method using stabilized zirconia electrolytes, with revised values for the Fe-?FeO?, Co-CoO, Ni-NiO and Cu-Cu2O oxygen bu...
  149. Activity-composition relations in FeTiO3-MnTiO3 ilmenite solid solutions from EMF measurements at 1050?1300 K
  150. Ilmenite-rutile-iron and ulvospinel-ilmenite-iron equilibria and the thermochemistry of ilmenite (FeTiO3) and ulvospinel (Fe2TiO4)
  151. Fe-Mn partitioning between garnet and ilmenite: experimental calibration and applications
  152. Fe-Mn partitioning between garnet and ilmenite: experimental calibration and applications
  153. Electron Microbeam Analysis Techniques used for the Characterization of Industrial Minerals