All Stories

  1. Graphene Quantum Dots from Agricultural Wastes: Green Synthesis and Advanced Applications for Energy Storage
  2. Magnetic CuFe2O4 Nanoparticles Immobilized on Modified Rice Husk-Derived Zeolite for Chlorogenic Acid Adsorption
  3. Correlative analysis of advanced microscopy techniques for metallography and corrosion microstructures of bronze phoenician coins
  4. Structuring lipid nanoparticles, DNA, and protein corona into stealth bionanoarchitectures for in vivo gene delivery
  5. Long-term monitoring of the hypogeal Etruscan Tomba degli Scudi, Tarquinia, Italy. Early detection of black spots, investigation of fungal community, and evaluation of their biodeterioration potential
  6. Virtual histology based on 3D X-ray microscopy imaging for non-destructive age-at-death estimation of incinerated teeth from the Tophet of Motya (Sicily, 6th century BC)
  7. Comparative Studies on Nanocellulose as a Bio-Based Consolidating Agent for Ancient Wood
  8. Direct Conjugation of TiO2 Nanoparticles with Phototherapeutic Prodrug 5‐Aminolevulinic Acid
  9. Micro and nanostructured carbon-phenolic ablators modified by PVP addition
  10. Correlative microscopy and Micro-Raman spectroscopy for enhancing the evaluation of corrosion damage in archaeological objects
  11. Strained Silicon Technology: Non-Destructive High-Lateral-Resolution Characterization Through Tip-Enhanced Raman Spectroscopy
  12. M1-derived extracellular vesicles polarize recipient macrophages into M2-like macrophages and alter skeletal muscle homeostasis in a hyper-glucose environment
  13. Journal of Experimental and Theoretical Analyses: The Journey from Research to Solutions
  14. Methane-hydrogen-rich fluid migration may trigger seismic failure in subduction zones at forearc depths
  15. Carbon nanodots from orange peel waste as fluorescent probes for detecting nitrobenzene
  16. Toward the nanoscale chemical and physical probing of milk-derived extracellular vesicles using Raman and tip-enhanced Raman spectroscopy
  17. Exploring the infiltrative and degradative ability of Fusarium oxysporum on polyethylene terephthalate (PET) using correlative microscopy and deep learning
  18. Upscaling of Electrospinning Technology and the Application of Functionalized PVDF-HFP@TiO2 Electrospun Nanofibers for the Rapid Photocatalytic Deactivation of Bacteria on Advanced Face Masks
  19. Correlative Light and Electron Microscopy (CLEM): A Multifaceted Tool for the Study of Geological Specimens
  20. Isolation of carbonatogenic bacteria for biorestoration
  21. Low-velocity impact behaviour of biocomposite laminates reinforced by flax, basalt and hybrid fibres at various temperatures: Analytical, numerical and experimental results
  22. Advances in Focused Ion Beam Tomography for Three-Dimensional Characterization in Materials Science
  23. Multimodal and multiscale investigation for the optimization of AlSi10Mg components made by powder bed fusion-laser beam
  24. Influence of the conductive coating on combined CPEM and Raman analysis.
  25. Preservation and Reproduction of an Ancient Human Humerus through X-ray Microscopy and 3D Printing
  26. Remodeled eX vivo muscle engineered tissue improves heart function after chronic myocardial ischemia
  27. 3D fractures analysis and conservation assessment of wrought iron javelin through advanced non-invasive techniques
  28. Methane-hydrogen-rich fluid migration triggers seismic failure in subduction at forearc depths
  29. Atomic force microscopy as a tool for mechanical characterization at the nanometer scale
  30. Electrospun nanofibers for medical face mask with protection capabilities against viruses: State of the art and perspective for industrial scale-up
  31. X‐Ray Microscopy: A Non‐Destructive Multi‐Scale Imaging to Study the Inner Workings of Batteries
  32. Wild-Type and SOD1-G93A SH-SY5Y under Oxidative Stress: EVs Characterization and Topographical Distribution of Budding Vesicles
  33. X‐Ray Microscopy: A Non‐Destructive Multi‐Scale Imaging to Study the Inner Workings of Batteries
  34. 3D imaging of micro-segregation and corrosion behavior of alloying elements in archaeological artefacts from Motya (Sicily, Italy)
  35. Journal of Experimental and Theoretical Analyses—JETA: A New Open Access Journal for Highlighting the Results of Multidisciplinary Analyses in Science, Technology, and Engineering
  36. Conventional and advanced techniques for archaeological diagnostic of iron artefacts
  37. Analysis of Roman Era archaeological finds from Museo Territoriale del Lago di Bolsena with non-destructive investigation techniques
  38. Extraordinary optical transmittance generation on Si3N4 membranes
  39. XRM imaging for non-destructive age at death estimation of the incinerated teeth from the Motya Tophet
  40. A Review of Applications of Nanocellulose to Preserve and Protect Cultural Heritage Wood, Paintings, and Historical Papers
  41. 3D X-ray Microscopy (XRM) investigation of exogenous materials inside mussels’ organs
  42. Comparison of different correlative AFM-SEM workflows on calcite moonmilk
  43. New Approach in Physical Failure Analysis Based on 3D Reconstruction
  44. High-resolution atomic force microscopy as a tool for topographical mapping of surface budding
  45. A comprehensive strategy for exploring corrosion in iron-based artefacts through advanced Multiscale X-ray Microscopy
  46. Nanoscale characterization methods in plant disease management
  47. Review—Multiscale Characterization of Li-Ion Batteries through the Combined Use of Atomic Force Microscopy and X-ray Microscopy and Considerations for a Correlative Analysis of the Reviewed Data
  48. Carbon Nanotubes for Gas Sensing
  49. Current Nanocarrier Strategies Improve Vitamin B12 Pharmacokinetics, Ameliorate Patients’ Lives, and Reduce Costs
  50. Micro and Nanoplastics Identification: Classic Methods and Innovative Detection Techniques
  51. Preliminary results towards the mechanical characterization of cellulose nanofibers using HarmoniX mode atomic force microscopy
  52. Magnetic Force Microscopy and Magnetic Nanoparticles: Perspectives and Challenges
  53. Magnetic force microscopy characterization of core–shell cobalt-oxide/hydroxide nanoparticles
  54. Determination of Total Silicon and SiO2 Particles Using an ICP-MS Based Analytical Platform for Toxicokinetic Studies of Synthetic Amorphous Silica
  55. Different instrumental approaches to understand the chitosan coated niosomes/mucin interaction
  56. Mechanical Characterization of Methanol Plasma Treated Fluorocarbon Ultrathin Films Through Atomic Force Microscopy
  57. Preface: NANOINNOVATION 2019
  58. Magnetic force microscopy characterization of cobalt nanoparticles: A preliminary study
  59. Graphene Oxide: A Smart (Starting) Material for Natural Methylxanthines Adsorption and Detection
  60. 15th Eurasia Conference on Chemical Sciences (EuAsC2S-15) – 5th–8th September 2018, Rome, Italy
  61. Hydrophilic Silver Nanoparticles Loaded into Niosomes: Physical–Chemical Characterization in View of Biological Applications
  62. How alkali-activated Ti surfaces affect the growth of tethered PMMA chains: a close-up study on the PMMA thickness and surface morphology
  63. Spinning Disk Reactor Technique for the Synthesis of Nanometric Sulfur TiO2Core–Shell Powder for Lithium Batteries
  64. Thermal and mechanical optimization of nano-foams for sprayed insulation
  65. Long-Lasting, Antinociceptive Effects of pH-Sensitive Niosomes Loaded with Ibuprofen in Acute and Chronic Models of Pain
  66. Preface: NANOINNOVATION 2018
  67. Oxidative Plasma Treatment of Fluorocarbon Surfaces for Blood-Contacting Applications
  68. Development of new experimental test for sheet metals through-thickness behaviour characterization
  69. Intracellular Transport of Silver and Gold Nanoparticles and Biological Responses: An Update
  70. Identification of nanoparticles and nanosystems in biological matrices with scanning probe microscopy
  71. Chitosan Glutamate-Coated Niosomes: A Proposal for Nose-to-Brain Delivery
  72. Novel Alkali Activation of Titanium Substrates To Grow Thick and Covalently Bound PMMA Layers
  73. Deployment and exploitation of nanotechnology nanomaterials and nanomedicine
  74. Nanomechanical characterization of K-basalt from Roman comagmatic province: A preliminary study
  75. Preface: NANOINNOVATION 2017
  76. Natural and synthetic nanodiamonds: from stars to laboratories
  77. Multiscale mechanical characterization of hybrid Ti/PMMA layered materials
  78. Self-assembling of calcium salt of the new DNA base 5-carboxylcytosine
  79. Glucose capped silver nanoparticles induce cell cycle arrest in HeLa cells
  80. Microstructural evidence for seismic and aseismic slips along clay-bearing, carbonate faults
  81. Capability of tip-enhanced Raman spectroscopy about nanoscale analysis of strained silicon for semiconductor devices production
  82. Beyond the concepts of nanocomposite and 3D printing: PVA and nanodiamonds for layer-by-layer additive manufacturing
  83. Nanotechnology for Food Packaging and Food Quality Assessment
  84. Detection of stiff nanoparticles within cellular structures by contact resonance atomic force microscopy subsurface nanomechanical imaging
  85. Electrochemical atomic force microscopy: In situ monitoring of electrochemical processes
  86. In Situ control and modification of the probe magnetization state for accurate magnetic force microscopy
  87. Plasma enhanced hot filament CVD growth of thick carbon nanowall layers
  88. Preface: Nanoinnovation 2016
  89. Single nanoparticles magnetization curves by controlled tip magnetization magnetic force microscopy
  90. Study of the local and global deformation process of an aluminium alloy using full-field measurements
  91. Cover Picture: Phys. Status Solidi C 10–12/2016
  92. Nanocrystalline sp 2 and sp 3 carbons: CVD synthesis and applications
  93. Nanodiamonds and gold nanoparticles: a promising couple for CRM-free photonics
  94. Niosomal approach to brain delivery: Development, characterization and in vitro toxicological studies
  95. Structural and morphological peculiarities of hybrid Au/nanodiamond engineered nanostructures
  96. Magnetic Force Microscopy
  97. Removal of electrostatic artifacts in magnetic force microscopy by controlled magnetization of the tip: application to superparamagnetic nanoparticles
  98. Contact resonance atomic force microscopy (CR-AFM) in applied mineralogy: the case of natural and thermally treated diaspore
  99. Polymer functionalized nanocomposites for metals removal from water and wastewater: An overview
  100. Contact resonance atomic force microscopy for viscoelastic characterization of polymer-based nanocomposites at variable temperature
  101. Elastic modulus measurements at variable temperature: Validation of atomic force microscopy techniques
  102. Measurement of the nonmagnetic coating thickness of core-shell magnetic nanoparticles by controlled magnetization magnetic force microscopy
  103. Nanoshaping field emitters from glassy carbon sheets: a new functionality induced by H-plasma etching
  104. Preface: NanoItaly 2015
  105. Fabrication of hybrid Ti/PMMA materials for skull prosthesis reconstruction
  106. Methanol plasma treatment of fluorocarbon ultra-thin films for stents applications
  107. Microbial Cells Force Spectroscopy by Atomic Force Microscopy: A Review
  108. Microscopies at the Nanoscale for Nano-Scale Drug Delivery Systems
  109. Strategies for fabrication of innovative and highly biocompatible diamond electrodes
  110. Electronic Thermal Management by nanodiamonds
  111. Glucose capped silver nanoparticles enter HeLa cells and induce S and G2/M arrest
  112. Nanodiamonds and Conducting Polymers: a new paradigm for multifunctional nanomaterials
  113. Atomic Force Microscopy Techniques for Nanomechanical Characterization: A Polymeric Case Study
  114. 8.7% Power conversion efficiency polymer solar cell realized with non-chlorinated solvents
  115. Rhodamine/Nanodiamond as a System Model for Drug Carrier
  116. Biomedical Applications of Nanodiamonds: An Overview
  117. A Special Section on Nanodiamonds for Biomedical Applications
  118. Nanodiamonds for field emission: state of the art
  119. Polyaniline–nanodiamond fibers resulting from the self-assembly of nano-fibrils: a nanomechanical study
  120. A new apparatus for electron tomography in the scanning electron microscope
  121. Visualization and quantification of magnetic nanoparticles into vesicular systems by combined atomic and magnetic force microscopy
  122. Nanodiamonds: The ways forward
  123. Experimental issues in magnetic force microscopy of nanoparticles
  124. Preface: Nanoforum 2014
  125. Scientific basis of nanotechnology, implications for the food sector and future trends
  126. Nanocarbon surfaces for biomedicine
  127. Magnetic force microscopy
  128. Characterization of carbon structures produced by graphene self-assembly
  129. Network assembly of gold nanoparticles linked through fluorenyl dithiol bridges
  130. Detonation nanodiamonds tailor the structural order of PEDOT chains in conductive coating layers of hybrid nanoparticles
  131. Si/C hybrid nanostructures for Li-ion anodes: An overview
  132. Nanotechnology and textiles engineered by carbon nanotubes for the realization of advanced personal protective equipments
  133. Thickness measurement of soft thin films on periodically patterned magnetic substrates by phase difference magnetic force microscopy
  134. Solid-to-solid phase transformations of nanostructured selenium-tin thin films induced by thermal annealing in oxygen atmosphere
  135. Preface: Nanoforum 2013
  136. The Copper Age Mound Necropolis in Salve, Lecce, Italy: Radiocarbon Dating Results on Charcoals, Bones, Cremated Bones, and Pottery
  137. New morphological, chemical, and structural data of woolly erionite-Na from Durkee, Oregon, U.S.A.
  138. Oral, short-term exposure to titanium dioxide nanoparticles in Sprague-Dawley rat: focus on reproductive and endocrine systems and spleen
  139. Characterization of polyaniline–detonation nanodiamond nanocomposite fibers by atomic force microscopy based techniques
  140. On the tip calibration for accurate modulus measurement by contact resonance atomic force microscopy
  141. One-Step Growth and Shaping by a Dual-Plasma Reactor of Diamond Nanocones Arrays for the Assembling of Stable Cold Cathodes
  142. Macroscopic self-standing SWCNT fibres as efficient electron emitters with very high emission current for robust cold cathodes
  143. Role of gemcitabine-based combination therapy in the management of advanced pancreatic cancer: A meta-analysis of randomised trials
  144. Silver and carbon nanoparticles toxicity in sea urchin Paracentrotus lividus embryos
  145. Carbon Nanomaterials for Gas Adsorption
  146. High ordered biomineralization induced by carbon nanoparticles in the sea urchin Paracentrotus lividus
  147. Mechanical characterization of polymeric thin films by atomic force microscopy based techniques
  148. Epitaxial-like Growth of Co 3 O 4 /ZnO Quasi-1D Nanocomposites
  149. A Viable and Scalable Route for the Homogrowth of Si Nanocones and Si/C Nanostructures
  150. Silver Nanoparticles Stabilized with Thiols: A Close Look at the Local Chemistry and Chemical Structure
  151. Nanodiamond-mediated crystallization in fibers of PANI nanocomposites produced by template-free polymerization: Conductive and thermal properties of the fibrillar networks
  152. Two-Dimensional Networks of Ag Nanoparticles Bridged by Organometallic Ligand
  153. Hybrid C-nanotubes/Si 3D nanostructures by one-step growth in a dual-plasma reactor
  154. Thermoacoustic Emission from Carbon Nanotubes Imaged by Atomic Force Microscopy
  155. Conducting polymer/nanodiamond composites: New opportunities and scientific challenges for material science
  156. Nanodiamond-Triggered Organization in Fibers of PANI Nanocomposites Produced by Chemical and Electrochemical Routes: Structural Features and Functional characterizations
  157. Shaping of Diamonds in 1D Nanostructures and Strategies for Fabrication of All-Diamond Microcomponents
  158. Gold nanoparticles on nanodiamond for nanophotonic applications
  159. Engineering detonation nanodiamond – Polyaniline composites by electrochemical routes: Structural features and functional characterizations
  160. Nanoclustering in Silicon Induced by Oxygen Ions Implanted
  161. Electronic properties of individual and assembled homotype SWCNT bundles
  162. Study of PEDOT conductive polymer films by admittance measurements
  163. Detonation Nanodiamond as Building Blocks for Fabrication of Densely Packed Arrays of Diamond Nanowhiskers
  164. A Special Issue on Advanced Carbon Nanostructures
  165. Indentation modulus and hardness of polyaniline thin films by atomic force microscopy
  166. Quantitative Evaluation of Bacteria Adherent and in Biofilm on Single-Wall Carbon Nanotube-Coated Surfaces
  167. Beyond cusp anomalous dimension from integrability in SYM[sub 4]
  168. Self-assembling of detonation nanodiamond and control of the organization in PANI-based nanocomposites: a case study for a tailored shaping of specific 3D architectures
  169. Novel insight into the alignment and structural ordering of supported ZnO nanorods
  170. Replay to the article by Wendel HP et al.: Endothelial progenitor cell capture stents — Hype or hope?
  171. A Model of Field Emission from Carbon Nanotubes Decorated by Nanodiamonds
  172. Honeycomb arrays of carbon nanotubes in alumina templates for field emission based devices and electron sources
  173. Acoustics and atomic force microscopy for the mechanical characterization of thin films
  174. Nanotechnology radar thermal management
  175. Carbon nanotube/nanodiamond structures: An innovative concept for stable and ready-to-start electron emitters
  176. Indentation modulus and hardness of viscoelastic thin films by atomic force microscopy: A case study
  177. Field emission properties of carbon nanotube arrays grown in porous anodic alumina
  178. High dielectric nanocrystalline materials on carbon nanotubes for vacuum electronics
  179. Cold cathodes assembled by microsized carbon nanotubes (CNT) systems
  180. Self-Assembly of n-Diamond Nanocrystals Into Supercrystals
  181. An Innovative and Viable Route for the Realization of Ultra-Thin Supercapacitors Electrodes Assembled with Carbon Nanotubes
  182. Preparation and Functional Characterizations of Ta
  183. Atomic force acoustic microscopy characterization of nanostructured selenium–tin thin films
  184. Polycrystalline diamond on self-assembled detonation nanodiamond: a viable route for fabrication of all-diamond preformed microcomponents
  185. Nanodiamond-Coated Carbon Nanotubes: Early Stage of the CVD Growth Process
  186. ELECTRON SPIN RESONANCE STUDY OF POLY (ORTHO-ANISIDINE)/SINGLE-WALLED CARBON NANOTUBE COMPOSITE FILMS: SPIN DYNAMICS AND EFFECTS OF PHYSISORPTION PROCESSES
  187. Quantitative measurement of indentation hardness and modulus of compliant materials by atomic force microscopy
  188. Characterization of epoxy/single-walled carbon nanotubes composite samples via atomic force acoustic microscopy
  189. Nanotechnology RADAR thermal management
  190. Hybrid Carbon Nanotube/Nanodiamond Structures as Electron Emitters for Cold Cathodes
  191. Photoconductivity of Packed Homotype Bundles Formed by Aligned Single-Walled Carbon Nanotubes
  192. Preparation and Thermal Characterization of Carbon Nanotubes-Based Composites for Applications in Electronics Packaging
  193. Si doped and nanocomposite Si–diamond films: Cathodoluminescence and photoluminescence characterizations of Si centers
  194. Assembling x-ray sources by carbon nanotubes
  195. Carbon nanotube cold cathodes for miniature X-ray tubes
  196. A molecular-mechanics based finite element model for strength prediction of single wall carbon nanotubes
  197. Local indentation modulus characterization via two contact resonance frequencies atomic force acoustic microscopy
  198. Capacitive and analytical approaches for the analysis of field emission from carbon nanotubes in a sphere-to-plane diode
  199. Atomic force acoustic microscopy characterization of carbon-based materials
  200. Magnetic resonance study of Ni nanoparticles in single-walled carbon nanotube bundles
  201. The World of Carbon Nanotubes: An Overview of CVD Growth Methodologies
  202. Local indentation modulus characterization of diamondlike carbon films by atomic force acoustic microscopy two contact resonance frequencies imaging technique
  203. Ablated Mg films with a graphite cover as photocathodes
  204. Nanocrystalline non-planar carbons: Growth of carbon nanotubes and curled nanostructures
  205. Effect of tip geometry on local indentation modulus measurement via atomic force acoustic microscopy technique
  206. Local elastic measurement in nanostructured materials via atomic force acoustic microscopy technique
  207. New routes in carbon nanotube synthesis by means of a modified hot filament chemical vapor deposition technique
  208. Structural characterization of hybrid carbon nanomaterials
  209. Strategies towards the assembling of carbon nanotube systems for particle and electromagnetic beams handling
  210. Towards the realization of a multielectrode field emission device: controlled growth of single wall carbon nanotube arrays
  211. Photoemission from nano-structured a-C/diamond layers irradiated by intense Nd:YAG laser harmonics
  212. Controlled Evolution of Carbon Nanotubes Coated by Nanodiamond:  the Realization of a New Class of Hybrid Nanomaterials
  213. Modulation of electrical properties in single-walled carbon nanotube/conducting polymer composites
  214. Meso- and nano-scale investigation of carbon fibers coated by nano-crystalline diamond
  215. Density Functional Study of H-Induced Defects as Nucleation Sites in Hybrid Carbon Nanomaterials
  216. Chemical/structural characterization of carbon nanoparticles produced by laser pyrolysis and used for nanotube growth
  217. Organized networks of helically wound single-walled C-nanotubes
  218. Structural features of diamond layers photo-emitting at sub-band gap energies
  219. Photoemission from diamond films illuminated by intense Nd:YAG laser harmonics
  220. Organization of single-walled nanotubes into macro-sized rectangularly shaped ribbons
  221. Modulation of charge transport in diamond-based layers
  222. Nanocomposite Si/Diamond Layers: Room Temperature Visible-Light Emitting Systems
  223. Aligned arrays of carbon nanotubes: modulation of orientation and selected-area growth
  224. Carbon nanotubes and nanowires grown from spherical carbon nano-particles
  225. Self-assembled carbon nanotubes grown without catalyst from nanosized carbon particles adsorbed on silicon
  226. Temperature-dependent conduction of W-containing composite diamond films
  227. Pulsed laser ablation of glassy carbon targets for the coating of ion accelerator electrodes
  228. Tree-like carbon nanostructures generated by the action of atomic hydrogen on glassy carbon
  229. Electrochemical behaviour of electrodes assembled with Ti-containing diamond films
  230. Silicon quantum dots in diamond matrix: a new synthesis route
  231. Polycrystalline diamond and Nd-doped diamond photoemitters
  232. Diamond-based composite layers as protective coatings for ion beam extraction systems
  233. Structural investigations of single-wall carbon nanotubes grown from nanosized graphite
  234. Growth of single-walled carbon nanotubes by a novel technique using nanosized graphite as carbon source
  235. Synthesis and characterization of ZnS nanoparticles in water/AOT/n-heptane microemulsions
  236. Microstructure and properties of nanocomposite diamond films obtained by a new CVD-based technique
  237. Unusual electrical behavior of Nd-doped diamond films
  238. A New CVD Route for the Synthesis of Composite Diamond-Based Materials
  239. Photoluminescence from silicon nanoparticles in a diamond matrix
  240. METALLIC CONDUCTION OF DIAMOND LAYERS CONTAINING NANOSIZE Nd DISPERSIONS
  241. ROOM TEMPERATURE PHOTOLUMINESCENCE FROM SILICON NANOPARTICLES EMBEDDED IN A DIAMOND MATRIX
  242. Antihypertensive efficacy of angiotensin converting enzyme inhibition and aspirin counteraction
  243. Selective production of carbon structures by non-equilibrium techniques
  244. Masthead
  245. Features of diamond deposition on modified silica glass substrates
  246. Amorphization and crystallization in high-dose Zn+-implanted silicon
  247. Cross‐sectional high resolution electron microscopy of Zn+ implanted and low‐power pulsed‐laser annealed GaAs
  248. Structural investigation of the titanium/diamond film interface
  249. Influence of Different Carbon Structures on Diamond Synthesis by Chemical Vapour Deposition
  250. Low power pulsed laser annealing of Zn+-implanted InP: first endeavours
  251. Solid-phase epitaxy induced by low-power pulsed-laser annealing of III-V compound semiconductors
  252. Morphological and Structural Investigations of Diamond Films Deposited on Substrates Covered by Carbon Layers
  253. Lattice defects in ion implanted GaAs
  254. Analysis of the Intermediate Layers Generated at the Film-Substrate Interface During the CVD Process of Diamond Synthesis
  255. Laser‐induced structural modifications of glassy carbon surfaces
  256. Lattice Electron Microscopy and Image Processing of Ion-Implanted and Laser-Annealed GaAs Structures
  257. Diamond Film CVD Synthesis on Titanium: Experimental Evidence of the Intermediate Phases at the Film/Substrate Interface
  258. Random and channeled ion-damage distributions in Zn+implanted GaAs by electron microscopy
  259. Development of different carbon phases during diamond film growth by CVD on glassy carbon substrates
  260. Laser-Induced Reduction of Carrier Activation Energy in Zn-Implanted GaAs
  261. Growth methodologies and characterization of different polycrystalline diamond films on Ta substrates
  262. Experimental evidence of different crystalline forms in chemical vapor deposited diamond films
  263. XPS study of laser-annealed ion-implanted GaAs
  264. High Voltage Transmission Electron Microscopy of Low Power Pulsed Laser Annealing of Zn + Implanted GaAs
  265. Damage distribution in GaAs implanted at elevated temperature
  266. Temperature behavior of implanted and pulsed laser irradiated GaAs
  267. Direct laser indiffusion of Ti into LiNbO3single crystals
  268. Laser in-diffusion of Ti in LiNbO3 single crystals
  269. RHEED and RBS analysis of low-power laser annealed GaAs
  270. Ability of reflection high energy electron diffraction (RHEED) to observe structural modifications in ion-implanted and annealed GaAs
  271. Low‐power pulsed‐laser annealing of implanted GaAs
  272. Preparation and characterization of Li-doped ZnO films
  273. Optical propagation loss reduction in ZnO thin films under CO2 laser treatment
  274. Thermal non-linearities of semiconductor-doped glasses in the near-IR region
  275. Structural properties of ZnO films prepared by R.F. sputtering for optical applications
  276. Dependence of glow discharge Si:H:Cl film morphology on diluent gas and SiCl4 partial pressure
  277. Influence of Ar-milling on cross-section structure of gallium arsenide
  278. About Some Peculiarities in Defect Appearence in Elemental and III–V Compound Semiconducting Materials
  279. Magnesium Film Photocathodes for High Brilliance Electron Injectors
  280. Controlled growth of ordered SWCNTs for the realization of multielectrode field emitter devices